|
@@ -0,0 +1,44 @@
|
|
|
+# GL-INet AR300M
|
|
|
+
|
|
|
+## Hardware Specs
|
|
|
+
|
|
|
+* SoC : Qualcomm Atheros QCA9531
|
|
|
+* Flash ROM : 16 MB Nor + 128 MB Nand
|
|
|
+* RAM : 128 MB
|
|
|
+
|
|
|
+## Flashing from factory
|
|
|
+
|
|
|
+### Using the factory web UI
|
|
|
+
|
|
|
+1) Set computer IP address to 192.168.1.2
|
|
|
+
|
|
|
+2) Connect the enternet from the computer to "lan" port on the router
|
|
|
+
|
|
|
+3) Press and hold the reset button, and power on the router by plugging in the power
|
|
|
+
|
|
|
+3) Wait until the LED flashes before releasing the reset button.
|
|
|
+
|
|
|
+4) Open IP address in the browser 192.168.1.1
|
|
|
+
|
|
|
+5) Flash the appropriate image through the gui
|
|
|
+
|
|
|
+
|
|
|
+## Tested
|
|
|
+
|
|
|
+* v1.4.2 librecmc-ar71xx-nand-gl-ar300m-ubi-factory.img
|
|
|
+
|
|
|
+## Reset Instructions
|
|
|
+
|
|
|
+????
|
|
|
+
|
|
|
+## Notes:
|
|
|
+
|
|
|
+* This router is currently not officially supported by Librecmc
|
|
|
+
|
|
|
+* This router is dual flash and stock uboot attempts to boot nand flash first.
|
|
|
+
|
|
|
+* NOR flash uses .bin image and Nand flash uses .img image.
|
|
|
+
|
|
|
+* Default router ip is 192.168.10.1
|
|
|
+
|
|
|
+* On KDE, Disable change ipv4 method from automatic to manual to set the computer ip to 192.168.1.2.
|