|
|
@@ -41,6 +41,8 @@ Some routers use the following standard:
|
|
|
|
|
|
In this case, transmit is in the marked off box.
|
|
|
|
|
|
+
|
|
|
+
|
|
|
```
|
|
|
_________________
|
|
|
| |
|
|
|
@@ -69,10 +71,10 @@ Make sure that the GNU Screen package is installed and make sure that your user
|
|
|
`dialout` group.
|
|
|
|
|
|
Before we can use the terminal application, we need to know the baud rate at which the serial
|
|
|
-console will be provided at. With most devices running libreCMC and u-boot, this most likely will
|
|
|
+console will be provided. With most devices running libreCMC and u-boot, this most likely will
|
|
|
be 115200
|
|
|
|
|
|
-## putting it all together
|
|
|
+## Putting it all together
|
|
|
|
|
|
|
|
|
1) Plug in / wire up the serial cable to the board.
|
|
|
@@ -80,11 +82,23 @@ be 115200
|
|
|
2) Plug the USB part of the serial cable into an available USB port.
|
|
|
|
|
|
3) run `screen /dev/ttyUSB0 115200` or (if you are NOT part of the `dialout` group) `sudo screen /dev/ttyUSB0 115200`
|
|
|
+Please note that the serial device might have a different name (ttyUSB(n), ttyS0, etc...).
|
|
|
|
|
|
4) Power on the device you are connecting to.
|
|
|
|
|
|
5) You should see ledgible ASCII text scroll by.
|
|
|
|
|
|
+If the device gets all the way through the boot process, the libreCMC banner will appear with
|
|
|
+an shell prompt:
|
|
|
|
|
|
-# Still needs final review
|
|
|
+```
|
|
|
+ ____ _____ ____
|
|
|
+ _ _ _ | __|| || __|
|
|
|
+ | (_) |__ _ _ ___ | | | | | || |
|
|
|
+ | | | '_ \ '_/ -_)| |__ | | | || |__
|
|
|
+ |_|_|_.__/_| \___||____||_|_|_||____|
|
|
|
+ -----------------------------------------
|
|
|
|
|
|
+root@libreCMC:~#
|
|
|
+
|
|
|
+```
|
