libreCMC/target/linux/ramips/dts/WL-341V3.dts

/dts-v1/;

#include "rt3050.dtsi"

#include <dt-bindings/input/input.h>

/ {
	compatible = "WL-341V3", "ralink,rt3052-soc";
	model = "Sitecom WL-341 v3";

	cfi@1f000000 {
		compatible = "cfi-flash";
		reg = <0x1f000000 0x800000>;
		bank-width = <2>;
		device-width = <2>;
		#address-cells = <1>;
		#size-cells = <1>;

		partition@0 {
			label = "u-boot";
			reg = <0x0 0x20000>;
			read-only;
		};

		boardnvram: partition@20000 {
			label = "board-nvram";
			reg = <0x20000 0x10000>;
			read-only;
		};

		partition@30000 {
			label = "u-boot-env";
			reg = <0x30000 0x10000>;
			read-only;
		};

		partition@40000 {
			label = "firmware";
			reg = <0x40000 0x3b0000>;
		};
	};

	gpio-leds {
		compatible = "gpio-leds";

		first {
			label = "wl-341v3:amber:first";
			gpios = <&gpio0 9 1>;
		};

		first2 {
			label = "wl-341v3:blue:first";
			gpios = <&gpio0 13 1>;
		};

		third {
			label = "wl-341v3:amber:third";
			gpios = <&gpio0 11 1>;
		};

		third2 {
			label = "wl-341v3:blue:third";
			gpios = <&gpio0 14 1>;
		};

		fourth {
			label = "wl-341v3:blue:fourth";
			gpios = <&gpio0 10 1>;
		};

		fifth {
			label = "wl-341v3:amber:fifth";
			gpios = <&gpio0 12 1>;
		};

		fifth2 {
			label = "wl-341v3:blue:fifth";
			gpios = <&gpio0 8 1>;
		};
	};

	gpio-keys-polled {
		compatible = "gpio-keys-polled";
		#address-cells = <1>;
		#size-cells = <0>;
		poll-interval = <20>;

		reset {
			label = "reset";
			gpios = <&gpio0 7 1>;
			linux,code = <KEY_RESTART>;
		};

		wps {
			label = "wps";
			gpios = <&gpio0 5 1>;
			linux,code = <KEY_WPS_BUTTON>;
		};
	};
};

&pinctrl {
	state_default: pinctrl0 {
		gpio {
			ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
			ralink,function = "gpio";
		};
	};
};

&ethernet {
	mtd-mac-address = <&boardnvram 0xffa0>;
};

&esw {
	mediatek,portmap = <0x3e>;
};

&wmac {
	ralink,mtd-eeprom = <&boardnvram 0xfd70>;
};

&otg {
	status = "okay";
};