libreCMC/target/linux/ramips/dts/X5.dts

/dts-v1/;

#include "rt5350.dtsi"

#include <dt-bindings/input/input.h>

/ {
	compatible = "X5", "ralink,rt5350-soc";
	model = "Poray X5";

	gpio-leds {
		compatible = "gpio-leds";

		power {
			label = "x5:green:power";
			gpios = <&gpio0 13 1>;
		};

		20 {
			label = "x5:green:20";
			gpios = <&gpio0 12 1>;
		};

		50 {
			label = "x5:green:50";
			gpios = <&gpio0 11 1>;
		};

		80 {
			label = "x5:green:80";
			gpios = <&gpio0 7 1>;
		};
	};

	gpio-keys-polled {
		compatible = "gpio-keys-polled";
		#address-cells = <1>;
		#size-cells = <0>;
		poll-interval = <20>;

		bat {
			label = "bat";
			gpios = <&gpio0 9 1>;
			linux,code = <KEY_WPS_BUTTON>;
		};

		reset {
			label = "reset";
			gpios = <&gpio0 10 1>;
			linux,code = <KEY_RESTART>;
		};

		mode {
			label = "mode";
			gpios = <&gpio0 14 1>;
			linux,code = <BTN_0>;
			linux,input-type = <EV_SW>;
		};
	};

	gpio_export {
		compatible = "gpio-export";
		#size-cells = <0>;

		usb-mode {
			gpio-export,name = "usb-mode";
			gpio-export,output = <0>;
			gpios = <&gpio0 18 0>;
		};
	};
};

&spi0 {
	status = "okay";

	m25p80@0 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "jedec,spi-nor";
		reg = <0>;
		spi-max-frequency = <10000000>;

		partition@0 {
			label = "u-boot";
			reg = <0x0 0x30000>;
			read-only;
		};

		partition@30000 {
			label = "u-boot-env";
			reg = <0x30000 0x10000>;
			read-only;
		};

		factory: partition@40000 {
			label = "factory";
			reg = <0x40000 0x10000>;
			read-only;
		};

		partition@50000 {
			label = "firmware";
			reg = <0x50000 0x7b0000>;
		};
	};
};

&pinctrl {
	state_default: pinctrl0 {
		gpio {
			ralink,group = "i2c", "jtag", "uartf";
			ralink,function = "gpio";
		};
	};
};

&ethernet {
	mtd-mac-address = <&factory 0x4>;
};

&esw {
	mediatek,portmap = <0x2f>;
	mediatek,led_polarity = <1>;
};

&wmac {
	ralink,mtd-eeprom = <&factory 0>;
	ralink,led-polarity = <1>;
};

&ehci {
	status = "okay";
};

&ohci {
	status = "okay";
};