/* * Copyright (c) 2013-2023, Arm Limited and Contributors. All rights reserved. * * SPDX-License-Identifier: BSD-3-Clause */ /******************************************************************************* * This is the Secure Payload Dispatcher (SPD). The dispatcher is meant to be a * plug-in component to the Secure Monitor, registered as a runtime service. The * SPD is expected to be a functional extension of the Secure Payload (SP) that * executes in Secure EL1. The Secure Monitor will delegate all SMCs targeting * the Trusted OS/Applications range to the dispatcher. The SPD will either * handle the request locally or delegate it to the Secure Payload. It is also * responsible for initialising and maintaining communication with the SP. ******************************************************************************/ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #if OPTEE_ALLOW_SMC_LOAD #include #endif /* OPTEE_ALLOW_SMC_LOAD */ #include #include #include #include "opteed_private.h" #include "teesmc_opteed.h" #if OPTEE_ALLOW_SMC_LOAD static struct transfer_list_header *bl31_tl; #endif /******************************************************************************* * Address of the entrypoint vector table in OPTEE. It is * initialised once on the primary core after a cold boot. ******************************************************************************/ struct optee_vectors *optee_vector_table; /******************************************************************************* * Array to keep track of per-cpu OPTEE state ******************************************************************************/ optee_context_t opteed_sp_context[OPTEED_CORE_COUNT]; uint32_t opteed_rw; #if OPTEE_ALLOW_SMC_LOAD static bool opteed_allow_load; /* OP-TEE image loading service UUID */ DEFINE_SVC_UUID2(optee_image_load_uuid, 0xb1eafba3, 0x5d31, 0x4612, 0xb9, 0x06, 0xc4, 0xc7, 0xa4, 0xbe, 0x3c, 0xc0); #define OPTEED_FDT_SIZE 1024 static uint8_t fdt_buf[OPTEED_FDT_SIZE] __aligned(CACHE_WRITEBACK_GRANULE); #else static int32_t opteed_init(void); #endif uint64_t dual32to64(uint32_t high, uint32_t low) { return ((uint64_t)high << 32) | low; } /******************************************************************************* * This function is the handler registered for S-EL1 interrupts by the * OPTEED. It validates the interrupt and upon success arranges entry into * the OPTEE at 'optee_fiq_entry()' for handling the interrupt. ******************************************************************************/ static uint64_t opteed_sel1_interrupt_handler(uint32_t id, uint32_t flags, void *handle, void *cookie) { uint32_t linear_id; optee_context_t *optee_ctx; #if OPTEE_ALLOW_SMC_LOAD if (optee_vector_table == NULL) { /* OPTEE is not loaded yet, ignore this interrupt */ SMC_RET0(handle); } #endif /* Check the security state when the exception was generated */ assert(get_interrupt_src_ss(flags) == NON_SECURE); /* Sanity check the pointer to this cpu's context */ assert(handle == cm_get_context(NON_SECURE)); /* Save the non-secure context before entering the OPTEE */ cm_el1_sysregs_context_save(NON_SECURE); /* Get a reference to this cpu's OPTEE context */ linear_id = plat_my_core_pos(); optee_ctx = &opteed_sp_context[linear_id]; assert(&optee_ctx->cpu_ctx == cm_get_context(SECURE)); cm_set_elr_el3(SECURE, (uint64_t)&optee_vector_table->fiq_entry); cm_el1_sysregs_context_restore(SECURE); cm_set_next_eret_context(SECURE); /* * Tell the OPTEE that it has to handle an FIQ (synchronously). * Also the instruction in normal world where the interrupt was * generated is passed for debugging purposes. It is safe to * retrieve this address from ELR_EL3 as the secure context will * not take effect until el3_exit(). */ SMC_RET1(&optee_ctx->cpu_ctx, read_elr_el3()); } /* * Registers an interrupt handler for S-EL1 interrupts when generated during * code executing in the non-secure state. Panics if it fails to do so. */ static void register_opteed_interrupt_handler(void) { u_register_t flags; uint64_t rc; flags = 0; set_interrupt_rm_flag(flags, NON_SECURE); rc = register_interrupt_type_handler(INTR_TYPE_S_EL1, opteed_sel1_interrupt_handler, flags); if (rc) panic(); } /******************************************************************************* * OPTEE Dispatcher setup. The OPTEED finds out the OPTEE entrypoint and type * (aarch32/aarch64) if not already known and initialises the context for entry * into OPTEE for its initialization. ******************************************************************************/ static int32_t opteed_setup(void) { #if OPTEE_ALLOW_SMC_LOAD opteed_allow_load = true; INFO("Delaying OP-TEE setup until we receive an SMC call to load it\n"); /* * We must register the interrupt handler now so that the interrupt * priorities are not changed after starting the linux kernel. */ register_opteed_interrupt_handler(); return 0; #else entry_point_info_t *optee_ep_info; uint32_t linear_id; uint64_t arg0; uint64_t arg1; uint64_t arg2; uint64_t arg3; struct transfer_list_header *tl = NULL; struct transfer_list_entry *te = NULL; void *dt = NULL; linear_id = plat_my_core_pos(); /* * Get information about the Secure Payload (BL32) image. Its * absence is a critical failure. TODO: Add support to * conditionally include the SPD service */ optee_ep_info = bl31_plat_get_next_image_ep_info(SECURE); if (!optee_ep_info) { WARN("No OPTEE provided by BL2 boot loader, Booting device" " without OPTEE initialization. SMC`s destined for OPTEE" " will return SMC_UNK\n"); return 1; } /* * If there's no valid entry point for SP, we return a non-zero value * signalling failure initializing the service. We bail out without * registering any handlers */ if (!optee_ep_info->pc) return 1; if (TRANSFER_LIST && optee_ep_info->args.arg1 == (TRANSFER_LIST_SIGNATURE | REGISTER_CONVENTION_VERSION_MASK)) { tl = (void *)optee_ep_info->args.arg3; if (transfer_list_check_header(tl) == TL_OPS_NON) { return 1; } opteed_rw = GET_RW(optee_ep_info->spsr); te = transfer_list_find(tl, TL_TAG_FDT); dt = transfer_list_entry_data(te); if (opteed_rw == OPTEE_AARCH64) { arg0 = (uint64_t)dt; arg2 = 0; } else { arg2 = (uint64_t)dt; arg0 = 0; } arg1 = optee_ep_info->args.arg1; arg3 = optee_ep_info->args.arg3; } else { /* Default handoff arguments */ opteed_rw = optee_ep_info->args.arg0; arg0 = optee_ep_info->args.arg1; /* opteed_pageable_part */ arg1 = optee_ep_info->args.arg2; /* opteed_mem_limit */ arg2 = optee_ep_info->args.arg3; /* dt_addr */ arg3 = 0; } opteed_init_optee_ep_state(optee_ep_info, opteed_rw, optee_ep_info->pc, arg0, arg1, arg2, arg3, &opteed_sp_context[linear_id]); /* * All OPTEED initialization done. Now register our init function with * BL31 for deferred invocation */ bl31_register_bl32_init(&opteed_init); return 0; #endif /* OPTEE_ALLOW_SMC_LOAD */ } /******************************************************************************* * This function passes control to the OPTEE image (BL32) for the first time * on the primary cpu after a cold boot. It assumes that a valid secure * context has already been created by opteed_setup() which can be directly * used. It also assumes that a valid non-secure context has been * initialised by PSCI so it does not need to save and restore any * non-secure state. This function performs a synchronous entry into * OPTEE. OPTEE passes control back to this routine through a SMC. This returns * a non-zero value on success and zero on failure. ******************************************************************************/ static int32_t opteed_init_with_entry_point(entry_point_info_t *optee_entry_point) { uint32_t linear_id = plat_my_core_pos(); optee_context_t *optee_ctx = &opteed_sp_context[linear_id]; uint64_t rc; assert(optee_entry_point); cm_init_my_context(optee_entry_point); /* * Arrange for an entry into OPTEE. It will be returned via * OPTEE_ENTRY_DONE case */ rc = opteed_synchronous_sp_entry(optee_ctx); assert(rc != 0); return rc; } #if !OPTEE_ALLOW_SMC_LOAD static int32_t opteed_init(void) { entry_point_info_t *optee_entry_point; /* * Get information about the OP-TEE (BL32) image. Its * absence is a critical failure. */ optee_entry_point = bl31_plat_get_next_image_ep_info(SECURE); return opteed_init_with_entry_point(optee_entry_point); } #endif /* !OPTEE_ALLOW_SMC_LOAD */ #if OPTEE_ALLOW_SMC_LOAD #if COREBOOT /* * Adds a firmware/coreboot node with the coreboot table information to a device * tree. Returns zero on success or if there is no coreboot table information; * failure code otherwise. */ static int add_coreboot_node(void *fdt) { int ret; uint64_t coreboot_table_addr; uint32_t coreboot_table_size; struct { uint64_t addr; uint32_t size; } reg_node; coreboot_get_table_location(&coreboot_table_addr, &coreboot_table_size); if (!coreboot_table_addr || !coreboot_table_size) { WARN("Unable to get coreboot table location for device tree"); return 0; } ret = fdt_begin_node(fdt, "firmware"); if (ret) return ret; ret = fdt_property(fdt, "ranges", NULL, 0); if (ret) return ret; ret = fdt_begin_node(fdt, "coreboot"); if (ret) return ret; ret = fdt_property_string(fdt, "compatible", "coreboot"); if (ret) return ret; reg_node.addr = cpu_to_fdt64(coreboot_table_addr); reg_node.size = cpu_to_fdt32(coreboot_table_size); ret = fdt_property(fdt, "reg", ®_node, sizeof(uint64_t) + sizeof(uint32_t)); if (ret) return ret; ret = fdt_end_node(fdt); if (ret) return ret; return fdt_end_node(fdt); } #endif /* COREBOOT */ #if CROS_WIDEVINE_SMC /* * Adds a options/widevine node with the widevine table information to a device * tree. Returns zero on success or if there is no widevine table information; * failure code otherwise. */ static int add_options_widevine_node(void *fdt) { int ret; ret = fdt_begin_node(fdt, "options"); if (ret) return ret; ret = fdt_begin_node(fdt, "op-tee"); if (ret) return ret; ret = fdt_begin_node(fdt, "widevine"); if (ret) return ret; if (cros_oem_tpm_auth_pk.length) { ret = fdt_property(fdt, "tcg,tpm-auth-public-key", cros_oem_tpm_auth_pk.buffer, cros_oem_tpm_auth_pk.length); if (ret) return ret; } if (cros_oem_huk.length) { ret = fdt_property(fdt, "op-tee,hardware-unique-key", cros_oem_huk.buffer, cros_oem_huk.length); if (ret) return ret; } if (cros_oem_rot.length) { ret = fdt_property(fdt, "google,widevine-root-of-trust-ecc-p256", cros_oem_rot.buffer, cros_oem_rot.length); if (ret) return ret; } ret = fdt_end_node(fdt); if (ret) return ret; ret = fdt_end_node(fdt); if (ret) return ret; return fdt_end_node(fdt); } #endif /* CROS_WIDEVINE_SMC */ /* * Creates a device tree for passing into OP-TEE. Currently is populated with * the coreboot table address. * Returns 0 on success, error code otherwise. */ static int create_opteed_dt(void) { int ret; ret = fdt_create(fdt_buf, OPTEED_FDT_SIZE); if (ret) return ret; ret = fdt_finish_reservemap(fdt_buf); if (ret) return ret; ret = fdt_begin_node(fdt_buf, ""); if (ret) return ret; #if COREBOOT ret = add_coreboot_node(fdt_buf); if (ret) return ret; #endif /* COREBOOT */ #if CROS_WIDEVINE_SMC ret = add_options_widevine_node(fdt_buf); if (ret) return ret; #endif /* CROS_WIDEVINE_SMC */ ret = fdt_end_node(fdt_buf); if (ret) return ret; return fdt_finish(fdt_buf); } static int32_t create_smc_tl(const void *fdt, uint32_t fdt_sz) { #if TRANSFER_LIST bl31_tl = transfer_list_init((void *)(uintptr_t)FW_HANDOFF_BASE, FW_HANDOFF_SIZE); if (!bl31_tl) { ERROR("Failed to initialize Transfer List at 0x%lx\n", (unsigned long)FW_HANDOFF_BASE); return -1; } if (!transfer_list_add(bl31_tl, TL_TAG_FDT, fdt_sz, fdt)) { return -1; } return 0; #else return -1; #endif } /******************************************************************************* * This function is responsible for handling the SMC that loads the OP-TEE * binary image via a non-secure SMC call. It takes the size and physical * address of the payload as parameters. ******************************************************************************/ static int32_t opteed_handle_smc_load(uint64_t data_size, uint32_t data_pa) { uintptr_t data_va = data_pa; uint64_t mapped_data_pa; uintptr_t mapped_data_va; uint64_t data_map_size; int32_t rc; optee_header_t *image_header; uint8_t *image_ptr; uint64_t target_pa; uint64_t target_end_pa; uint64_t image_pa; uintptr_t image_va; optee_image_t *curr_image; uintptr_t target_va; uint64_t target_size; entry_point_info_t optee_ep_info; uint32_t linear_id = plat_my_core_pos(); uint64_t dt_addr = 0; uint64_t arg0 = 0; uint64_t arg1 = 0; uint64_t arg2 = 0; uint64_t arg3 = 0; mapped_data_pa = page_align(data_pa, DOWN); mapped_data_va = mapped_data_pa; data_map_size = page_align(data_size + (mapped_data_pa - data_pa), UP); /* * We do not validate the passed in address because we are trusting the * non-secure world at this point still. */ rc = mmap_add_dynamic_region(mapped_data_pa, mapped_data_va, data_map_size, MT_MEMORY | MT_RO | MT_NS); if (rc != 0) { return rc; } image_header = (optee_header_t *)data_va; if (image_header->magic != TEE_MAGIC_NUM_OPTEE || image_header->version != 2 || image_header->nb_images != 1) { mmap_remove_dynamic_region(mapped_data_va, data_map_size); return -EINVAL; } image_ptr = (uint8_t *)data_va + sizeof(optee_header_t) + sizeof(optee_image_t); if (image_header->arch == 1) { opteed_rw = OPTEE_AARCH64; } else { opteed_rw = OPTEE_AARCH32; } curr_image = &image_header->optee_image_list[0]; image_pa = dual32to64(curr_image->load_addr_hi, curr_image->load_addr_lo); image_va = image_pa; target_end_pa = image_pa + curr_image->size; /* Now also map the memory we want to copy it to. */ target_pa = page_align(image_pa, DOWN); target_va = target_pa; target_size = page_align(target_end_pa, UP) - target_pa; rc = mmap_add_dynamic_region(target_pa, target_va, target_size, MT_MEMORY | MT_RW | MT_SECURE); if (rc != 0) { mmap_remove_dynamic_region(mapped_data_va, data_map_size); return rc; } INFO("Loaded OP-TEE via SMC: size %d addr 0x%" PRIx64 "\n", curr_image->size, image_va); memcpy((void *)image_va, image_ptr, curr_image->size); flush_dcache_range(target_pa, target_size); mmap_remove_dynamic_region(mapped_data_va, data_map_size); mmap_remove_dynamic_region(target_va, target_size); /* Save the non-secure state */ cm_el1_sysregs_context_save(NON_SECURE); rc = create_opteed_dt(); if (rc) { ERROR("Failed device tree creation %d\n", rc); return rc; } dt_addr = (uint64_t)fdt_buf; flush_dcache_range(dt_addr, OPTEED_FDT_SIZE); if (TRANSFER_LIST && !create_smc_tl((void *)dt_addr, OPTEED_FDT_SIZE)) { struct transfer_list_entry *te = NULL; void *dt = NULL; te = transfer_list_find(bl31_tl, TL_TAG_FDT); dt = transfer_list_entry_data(te); if (opteed_rw == OPTEE_AARCH64) { arg0 = (uint64_t)dt; arg1 = TRANSFER_LIST_HANDOFF_X1_VALUE(REGISTER_CONVENTION_VERSION); arg2 = 0; } else { arg0 = 0; arg1 = TRANSFER_LIST_HANDOFF_R1_VALUE(REGISTER_CONVENTION_VERSION); arg2 = (uint64_t)dt; } arg3 = (uint64_t)bl31_tl; } else { /* Default handoff arguments */ arg2 = dt_addr; } opteed_init_optee_ep_state(&optee_ep_info, opteed_rw, image_pa, arg0, arg1, arg2, arg3, &opteed_sp_context[linear_id]); if (opteed_init_with_entry_point(&optee_ep_info) == 0) { rc = -EFAULT; } /* Restore non-secure state */ cm_el1_sysregs_context_restore(NON_SECURE); cm_set_next_eret_context(NON_SECURE); return rc; } #endif /* OPTEE_ALLOW_SMC_LOAD */ /******************************************************************************* * This function is responsible for handling all SMCs in the Trusted OS/App * range from the non-secure state as defined in the SMC Calling Convention * Document. It is also responsible for communicating with the Secure * payload to delegate work and return results back to the non-secure * state. Lastly it will also return any information that OPTEE needs to do * the work assigned to it. ******************************************************************************/ static uintptr_t opteed_smc_handler(uint32_t smc_fid, u_register_t x1, u_register_t x2, u_register_t x3, u_register_t x4, void *cookie, void *handle, u_register_t flags) { cpu_context_t *ns_cpu_context; uint32_t linear_id = plat_my_core_pos(); optee_context_t *optee_ctx = &opteed_sp_context[linear_id]; /* * Determine which security state this SMC originated from */ if (is_caller_non_secure(flags)) { #if OPTEE_ALLOW_SMC_LOAD if (opteed_allow_load && smc_fid == NSSMC_OPTEED_CALL_UID) { /* Provide the UUID of the image loading service. */ SMC_UUID_RET(handle, optee_image_load_uuid); } if (smc_fid == NSSMC_OPTEED_CALL_LOAD_IMAGE) { /* * TODO: Consider wiping the code for SMC loading from * memory after it has been invoked similar to what is * done under RECLAIM_INIT, but extended to happen * later. */ if (!opteed_allow_load) { SMC_RET1(handle, -EPERM); } opteed_allow_load = false; uint64_t data_size = dual32to64(x1, x2); uint64_t data_pa = dual32to64(x3, x4); if (!data_size || !data_pa) { /* * This is invoked when the OP-TEE image didn't * load correctly in the kernel but we want to * block off loading of it later for security * reasons. */ SMC_RET1(handle, -EINVAL); } SMC_RET1(handle, opteed_handle_smc_load( data_size, data_pa)); } #endif /* OPTEE_ALLOW_SMC_LOAD */ /* * This is a fresh request from the non-secure client. * The parameters are in x1 and x2. Figure out which * registers need to be preserved, save the non-secure * state and send the request to the secure payload. */ assert(handle == cm_get_context(NON_SECURE)); cm_el1_sysregs_context_save(NON_SECURE); /* * We are done stashing the non-secure context. Ask the * OP-TEE to do the work now. If we are loading vi an SMC, * then we also need to init this CPU context if not done * already. */ if (optee_vector_table == NULL) { SMC_RET1(handle, -EINVAL); } if (get_optee_pstate(optee_ctx->state) == OPTEE_PSTATE_UNKNOWN) { opteed_cpu_on_finish_handler(0); } /* * Verify if there is a valid context to use, copy the * operation type and parameters to the secure context * and jump to the fast smc entry point in the secure * payload. Entry into S-EL1 will take place upon exit * from this function. */ assert(&optee_ctx->cpu_ctx == cm_get_context(SECURE)); /* Set appropriate entry for SMC. * We expect OPTEE to manage the PSTATE.I and PSTATE.F * flags as appropriate. */ if (GET_SMC_TYPE(smc_fid) == SMC_TYPE_FAST) { cm_set_elr_el3(SECURE, (uint64_t) &optee_vector_table->fast_smc_entry); } else { cm_set_elr_el3(SECURE, (uint64_t) &optee_vector_table->yield_smc_entry); } cm_el1_sysregs_context_restore(SECURE); cm_set_next_eret_context(SECURE); write_ctx_reg(get_gpregs_ctx(&optee_ctx->cpu_ctx), CTX_GPREG_X4, read_ctx_reg(get_gpregs_ctx(handle), CTX_GPREG_X4)); write_ctx_reg(get_gpregs_ctx(&optee_ctx->cpu_ctx), CTX_GPREG_X5, read_ctx_reg(get_gpregs_ctx(handle), CTX_GPREG_X5)); write_ctx_reg(get_gpregs_ctx(&optee_ctx->cpu_ctx), CTX_GPREG_X6, read_ctx_reg(get_gpregs_ctx(handle), CTX_GPREG_X6)); /* Propagate hypervisor client ID */ write_ctx_reg(get_gpregs_ctx(&optee_ctx->cpu_ctx), CTX_GPREG_X7, read_ctx_reg(get_gpregs_ctx(handle), CTX_GPREG_X7)); SMC_RET4(&optee_ctx->cpu_ctx, smc_fid, x1, x2, x3); } /* * Returning from OPTEE */ switch (smc_fid) { /* * OPTEE has finished initialising itself after a cold boot */ case TEESMC_OPTEED_RETURN_ENTRY_DONE: /* * Stash the OPTEE entry points information. This is done * only once on the primary cpu */ assert(optee_vector_table == NULL); optee_vector_table = (optee_vectors_t *) x1; if (optee_vector_table) { set_optee_pstate(optee_ctx->state, OPTEE_PSTATE_ON); /* * OPTEE has been successfully initialized. * Register power management hooks with PSCI */ psci_register_spd_pm_hook(&opteed_pm); #if !OPTEE_ALLOW_SMC_LOAD register_opteed_interrupt_handler(); #endif } /* * OPTEE reports completion. The OPTEED must have initiated * the original request through a synchronous entry into * OPTEE. Jump back to the original C runtime context. */ opteed_synchronous_sp_exit(optee_ctx, x1); break; /* * These function IDs is used only by OP-TEE to indicate it has * finished: * 1. turning itself on in response to an earlier psci * cpu_on request * 2. resuming itself after an earlier psci cpu_suspend * request. */ case TEESMC_OPTEED_RETURN_ON_DONE: case TEESMC_OPTEED_RETURN_RESUME_DONE: /* * These function IDs is used only by the SP to indicate it has * finished: * 1. suspending itself after an earlier psci cpu_suspend * request. * 2. turning itself off in response to an earlier psci * cpu_off request. */ case TEESMC_OPTEED_RETURN_OFF_DONE: case TEESMC_OPTEED_RETURN_SUSPEND_DONE: case TEESMC_OPTEED_RETURN_SYSTEM_OFF_DONE: case TEESMC_OPTEED_RETURN_SYSTEM_RESET_DONE: /* * OPTEE reports completion. The OPTEED must have initiated the * original request through a synchronous entry into OPTEE. * Jump back to the original C runtime context, and pass x1 as * return value to the caller */ opteed_synchronous_sp_exit(optee_ctx, x1); break; /* * OPTEE is returning from a call or being preempted from a call, in * either case execution should resume in the normal world. */ case TEESMC_OPTEED_RETURN_CALL_DONE: /* * This is the result from the secure client of an * earlier request. The results are in x0-x3. Copy it * into the non-secure context, save the secure state * and return to the non-secure state. */ assert(handle == cm_get_context(SECURE)); cm_el1_sysregs_context_save(SECURE); /* Get a reference to the non-secure context */ ns_cpu_context = cm_get_context(NON_SECURE); assert(ns_cpu_context); /* Restore non-secure state */ cm_el1_sysregs_context_restore(NON_SECURE); cm_set_next_eret_context(NON_SECURE); SMC_RET4(ns_cpu_context, x1, x2, x3, x4); /* * OPTEE has finished handling a S-EL1 FIQ interrupt. Execution * should resume in the normal world. */ case TEESMC_OPTEED_RETURN_FIQ_DONE: /* Get a reference to the non-secure context */ ns_cpu_context = cm_get_context(NON_SECURE); assert(ns_cpu_context); /* * Restore non-secure state. There is no need to save the * secure system register context since OPTEE was supposed * to preserve it during S-EL1 interrupt handling. */ cm_el1_sysregs_context_restore(NON_SECURE); cm_set_next_eret_context(NON_SECURE); SMC_RET0((uint64_t) ns_cpu_context); default: panic(); } } /* Define an OPTEED runtime service descriptor for fast SMC calls */ DECLARE_RT_SVC( opteed_fast, OEN_TOS_START, OEN_TOS_END, SMC_TYPE_FAST, opteed_setup, opteed_smc_handler ); /* Define an OPTEED runtime service descriptor for yielding SMC calls */ DECLARE_RT_SVC( opteed_std, OEN_TOS_START, OEN_TOS_END, SMC_TYPE_YIELD, NULL, opteed_smc_handler );