/* * Copyright (c) 2013-2024, Arm Limited and Contributors. All rights reserved. * * SPDX-License-Identifier: BSD-3-Clause */ #include #include #include #include #include #include #if CTX_INCLUDE_FPREGS .global fpregs_context_save .global fpregs_context_restore #endif /* CTX_INCLUDE_FPREGS */ #if CTX_INCLUDE_SVE_REGS .global sve_context_save .global sve_context_restore #endif /* CTX_INCLUDE_SVE_REGS */ #if ERRATA_SPECULATIVE_AT .global save_and_update_ptw_el1_sys_regs #endif /* ERRATA_SPECULATIVE_AT */ .global prepare_el3_entry .global restore_gp_pmcr_pauth_regs .global el3_exit /* Following macros will be used if any of CTX_INCLUDE_FPREGS or CTX_INCLUDE_SVE_REGS is enabled */ #if CTX_INCLUDE_FPREGS || CTX_INCLUDE_SVE_REGS .macro fpregs_state_save base:req hold:req mrs \hold, fpsr str \hold, [\base, #CTX_SIMD_FPSR] mrs \hold, fpcr str \hold, [\base, #CTX_SIMD_FPCR] #if CTX_INCLUDE_AARCH32_REGS && CTX_INCLUDE_FPREGS mrs \hold, fpexc32_el2 str \hold, [\base, #CTX_SIMD_FPEXC32] #endif .endm .macro fpregs_state_restore base:req hold:req ldr \hold, [\base, #CTX_SIMD_FPSR] msr fpsr, \hold ldr \hold, [\base, #CTX_SIMD_FPCR] msr fpcr, \hold #if CTX_INCLUDE_AARCH32_REGS && CTX_INCLUDE_FPREGS ldr \hold, [\base, #CTX_SIMD_FPEXC32] msr fpexc32_el2, \hold #endif .endm #endif /* CTX_INCLUDE_FPREGS || CTX_INCLUDE_SVE_REGS */ /* ------------------------------------------------------------------ * The following function follows the aapcs_64 strictly to use * x9-x17 (temporary caller-saved registers according to AArch64 PCS) * to save floating point register context. It assumes that 'x0' is * pointing to a 'fp_regs' structure where the register context will * be saved. * * Access to VFP registers will trap if CPTR_EL3.TFP is set. * However currently we don't use VFP registers nor set traps in * Trusted Firmware, and assume it's cleared. * * TODO: Revisit when VFP is used in secure world * ------------------------------------------------------------------ */ #if CTX_INCLUDE_FPREGS func fpregs_context_save stp q0, q1, [x0], #32 stp q2, q3, [x0], #32 stp q4, q5, [x0], #32 stp q6, q7, [x0], #32 stp q8, q9, [x0], #32 stp q10, q11, [x0], #32 stp q12, q13, [x0], #32 stp q14, q15, [x0], #32 stp q16, q17, [x0], #32 stp q18, q19, [x0], #32 stp q20, q21, [x0], #32 stp q22, q23, [x0], #32 stp q24, q25, [x0], #32 stp q26, q27, [x0], #32 stp q28, q29, [x0], #32 stp q30, q31, [x0], #32 fpregs_state_save x0, x9 ret endfunc fpregs_context_save /* ------------------------------------------------------------------ * The following function follows the aapcs_64 strictly to use x9-x17 * (temporary caller-saved registers according to AArch64 PCS) to * restore floating point register context. It assumes that 'x0' is * pointing to a 'fp_regs' structure from where the register context * will be restored. * * Access to VFP registers will trap if CPTR_EL3.TFP is set. * However currently we don't use VFP registers nor set traps in * Trusted Firmware, and assume it's cleared. * * TODO: Revisit when VFP is used in secure world * ------------------------------------------------------------------ */ func fpregs_context_restore ldp q0, q1, [x0], #32 ldp q2, q3, [x0], #32 ldp q4, q5, [x0], #32 ldp q6, q7, [x0], #32 ldp q8, q9, [x0], #32 ldp q10, q11, [x0], #32 ldp q12, q13, [x0], #32 ldp q14, q15, [x0], #32 ldp q16, q17, [x0], #32 ldp q18, q19, [x0], #32 ldp q20, q21, [x0], #32 ldp q22, q23, [x0], #32 ldp q24, q25, [x0], #32 ldp q26, q27, [x0], #32 ldp q28, q29, [x0], #32 ldp q30, q31, [x0], #32 fpregs_state_restore x0, x9 ret endfunc fpregs_context_restore #endif /* CTX_INCLUDE_FPREGS */ #if CTX_INCLUDE_SVE_REGS /* * Helper macros for SVE predicates save/restore operations. */ .macro sve_predicate_op op:req reg:req \op p0, [\reg, #0, MUL VL] \op p1, [\reg, #1, MUL VL] \op p2, [\reg, #2, MUL VL] \op p3, [\reg, #3, MUL VL] \op p4, [\reg, #4, MUL VL] \op p5, [\reg, #5, MUL VL] \op p6, [\reg, #6, MUL VL] \op p7, [\reg, #7, MUL VL] \op p8, [\reg, #8, MUL VL] \op p9, [\reg, #9, MUL VL] \op p10, [\reg, #10, MUL VL] \op p11, [\reg, #11, MUL VL] \op p12, [\reg, #12, MUL VL] \op p13, [\reg, #13, MUL VL] \op p14, [\reg, #14, MUL VL] \op p15, [\reg, #15, MUL VL] .endm .macro sve_vectors_op op:req reg:req \op z0, [\reg, #0, MUL VL] \op z1, [\reg, #1, MUL VL] \op z2, [\reg, #2, MUL VL] \op z3, [\reg, #3, MUL VL] \op z4, [\reg, #4, MUL VL] \op z5, [\reg, #5, MUL VL] \op z6, [\reg, #6, MUL VL] \op z7, [\reg, #7, MUL VL] \op z8, [\reg, #8, MUL VL] \op z9, [\reg, #9, MUL VL] \op z10, [\reg, #10, MUL VL] \op z11, [\reg, #11, MUL VL] \op z12, [\reg, #12, MUL VL] \op z13, [\reg, #13, MUL VL] \op z14, [\reg, #14, MUL VL] \op z15, [\reg, #15, MUL VL] \op z16, [\reg, #16, MUL VL] \op z17, [\reg, #17, MUL VL] \op z18, [\reg, #18, MUL VL] \op z19, [\reg, #19, MUL VL] \op z20, [\reg, #20, MUL VL] \op z21, [\reg, #21, MUL VL] \op z22, [\reg, #22, MUL VL] \op z23, [\reg, #23, MUL VL] \op z24, [\reg, #24, MUL VL] \op z25, [\reg, #25, MUL VL] \op z26, [\reg, #26, MUL VL] \op z27, [\reg, #27, MUL VL] \op z28, [\reg, #28, MUL VL] \op z29, [\reg, #29, MUL VL] \op z30, [\reg, #30, MUL VL] \op z31, [\reg, #31, MUL VL] .endm /* ------------------------------------------------------------------ * The following function follows the aapcs_64 strictly to use x9-x17 * (temporary caller-saved registers according to AArch64 PCS) to * restore SVE register context. It assumes that 'x0' is * pointing to a 'sve_regs_t' structure to which the register context * will be saved. * ------------------------------------------------------------------ */ func sve_context_save .arch_extension sve /* Temporarily enable SVE */ mrs x10, cptr_el3 orr x11, x10, #CPTR_EZ_BIT bic x11, x11, #TFP_BIT msr cptr_el3, x11 isb /* zcr_el3 */ mrs x12, S3_6_C1_C2_0 mov x13, #((SVE_VECTOR_LEN >> 7) - 1) msr S3_6_C1_C2_0, x13 isb /* Predicate registers */ mov x13, #CTX_SIMD_PREDICATES add x9, x0, x13 sve_predicate_op str, x9 /* Save FFR after predicates */ mov x13, #CTX_SIMD_FFR add x9, x0, x13 rdffr p0.b str p0, [x9] /* Save vector registers */ mov x13, #CTX_SIMD_VECTORS add x9, x0, x13 sve_vectors_op str, x9 /* Restore SVE enablement */ msr S3_6_C1_C2_0, x12 /* zcr_el3 */ msr cptr_el3, x10 isb .arch_extension nosve /* Save FPSR, FPCR and FPEXC32 */ fpregs_state_save x0, x9 ret endfunc sve_context_save /* ------------------------------------------------------------------ * The following function follows the aapcs_64 strictly to use x9-x17 * (temporary caller-saved registers according to AArch64 PCS) to * restore SVE register context. It assumes that 'x0' is pointing to * a 'sve_regs_t' structure from where the register context will be * restored. * ------------------------------------------------------------------ */ func sve_context_restore .arch_extension sve /* Temporarily enable SVE for EL3 */ mrs x10, cptr_el3 orr x11, x10, #CPTR_EZ_BIT bic x11, x11, #TFP_BIT msr cptr_el3, x11 isb /* zcr_el3 */ mrs x12, S3_6_C1_C2_0 mov x13, #((SVE_VECTOR_LEN >> 7) - 1) msr S3_6_C1_C2_0, x13 isb /* Restore FFR register before predicates */ mov x13, #CTX_SIMD_FFR add x9, x0, x13 ldr p0, [x9] wrffr p0.b /* Restore predicate registers */ mov x13, #CTX_SIMD_PREDICATES add x9, x0, x13 sve_predicate_op ldr, x9 /* Restore vector registers */ mov x13, #CTX_SIMD_VECTORS add x9, x0, x13 sve_vectors_op ldr, x9 /* Restore SVE enablement */ msr S3_6_C1_C2_0, x12 /* zcr_el3 */ msr cptr_el3, x10 isb .arch_extension nosve /* Restore FPSR, FPCR and FPEXC32 */ fpregs_state_restore x0, x9 ret endfunc sve_context_restore #endif /* CTX_INCLUDE_SVE_REGS */ /* * Set SCR_EL3.EA bit to enable SErrors at EL3 */ .macro enable_serror_at_el3 mrs x8, scr_el3 orr x8, x8, #SCR_EA_BIT msr scr_el3, x8 .endm /* * Set the PSTATE bits not set when the exception was taken as * described in the AArch64.TakeException() pseudocode function * in ARM DDI 0487F.c page J1-7635 to a default value. */ .macro set_unset_pstate_bits /* * If Data Independent Timing (DIT) functionality is implemented, * always enable DIT in EL3 */ #if ENABLE_FEAT_DIT #if ENABLE_FEAT_DIT >= 2 mrs x8, id_aa64pfr0_el1 and x8, x8, #(ID_AA64PFR0_DIT_MASK << ID_AA64PFR0_DIT_SHIFT) cbz x8, 1f #endif mov x8, #DIT_BIT msr DIT, x8 1: #endif /* ENABLE_FEAT_DIT */ .endm /* set_unset_pstate_bits */ /*------------------------------------------------------------------------- * This macro checks the ENABLE_FEAT_MPAM state, performs ID register * check to see if the platform supports MPAM extension and restores MPAM3 * register value if it is FEAT_STATE_ENABLED/FEAT_STATE_CHECKED. * * This is particularly more complicated because we can't check * if the platform supports MPAM by looking for status of a particular bit * in the MDCR_EL3 or CPTR_EL3 register like other extensions. * ------------------------------------------------------------------------ */ .macro restore_mpam3_el3 #if ENABLE_FEAT_MPAM #if ENABLE_FEAT_MPAM >= 2 mrs x8, id_aa64pfr0_el1 lsr x8, x8, #(ID_AA64PFR0_MPAM_SHIFT) and x8, x8, #(ID_AA64PFR0_MPAM_MASK) mrs x7, id_aa64pfr1_el1 lsr x7, x7, #(ID_AA64PFR1_MPAM_FRAC_SHIFT) and x7, x7, #(ID_AA64PFR1_MPAM_FRAC_MASK) orr x7, x7, x8 cbz x7, no_mpam #endif /* ----------------------------------------------------------- * Restore MPAM3_EL3 register as per context state * Currently we only enable MPAM for NS world and trap to EL3 * for MPAM access in lower ELs of Secure and Realm world * x9 holds address of the per_world context * ----------------------------------------------------------- */ ldr x17, [x9, #CTX_MPAM3_EL3] msr S3_6_C10_C5_0, x17 /* mpam3_el3 */ no_mpam: #endif .endm /* restore_mpam3_el3 */ /* ------------------------------------------------------------------ * The following macro is used to save and restore all the general * purpose and ARMv8.3-PAuth (if enabled) registers. * It also checks if the Secure Cycle Counter (PMCCNTR_EL0) * is disabled in EL3/Secure (ARMv8.5-PMU), wherein PMCCNTR_EL0 * needs not to be saved/restored during world switch. * * Ideally we would only save and restore the callee saved registers * when a world switch occurs but that type of implementation is more * complex. So currently we will always save and restore these * registers on entry and exit of EL3. * clobbers: x18 * ------------------------------------------------------------------ */ .macro save_gp_pmcr_pauth_regs stp x0, x1, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X0] stp x2, x3, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X2] stp x4, x5, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X4] stp x6, x7, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X6] stp x8, x9, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X8] stp x10, x11, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X10] stp x12, x13, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X12] stp x14, x15, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X14] stp x16, x17, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X16] stp x18, x19, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X18] stp x20, x21, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X20] stp x22, x23, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X22] stp x24, x25, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X24] stp x26, x27, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X26] stp x28, x29, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X28] mrs x18, sp_el0 str x18, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_SP_EL0] /* PMUv3 is presumed to be always present */ mrs x9, pmcr_el0 str x9, [sp, #CTX_EL3STATE_OFFSET + CTX_PMCR_EL0] isb #if CTX_INCLUDE_PAUTH_REGS /* ---------------------------------------------------------- * Save the ARMv8.3-PAuth keys as they are not banked * by exception level * ---------------------------------------------------------- */ add x19, sp, #CTX_PAUTH_REGS_OFFSET mrs x20, APIAKeyLo_EL1 /* x21:x20 = APIAKey */ mrs x21, APIAKeyHi_EL1 mrs x22, APIBKeyLo_EL1 /* x23:x22 = APIBKey */ mrs x23, APIBKeyHi_EL1 mrs x24, APDAKeyLo_EL1 /* x25:x24 = APDAKey */ mrs x25, APDAKeyHi_EL1 mrs x26, APDBKeyLo_EL1 /* x27:x26 = APDBKey */ mrs x27, APDBKeyHi_EL1 mrs x28, APGAKeyLo_EL1 /* x29:x28 = APGAKey */ mrs x29, APGAKeyHi_EL1 stp x20, x21, [x19, #CTX_PACIAKEY_LO] stp x22, x23, [x19, #CTX_PACIBKEY_LO] stp x24, x25, [x19, #CTX_PACDAKEY_LO] stp x26, x27, [x19, #CTX_PACDBKEY_LO] stp x28, x29, [x19, #CTX_PACGAKEY_LO] #endif /* CTX_INCLUDE_PAUTH_REGS */ .endm /* save_gp_pmcr_pauth_regs */ /* ----------------------------------------------------------------- * This function saves the context and sets the PSTATE to a known * state, preparing entry to el3. * Save all the general purpose and ARMv8.3-PAuth (if enabled) * registers. * Then set any of the PSTATE bits that are not set by hardware * according to the Aarch64.TakeException pseudocode in the Arm * Architecture Reference Manual to a default value for EL3. * clobbers: x17 * ----------------------------------------------------------------- */ func prepare_el3_entry save_gp_pmcr_pauth_regs setup_el3_execution_context ret endfunc prepare_el3_entry /* ------------------------------------------------------------------ * This function restores ARMv8.3-PAuth (if enabled) and all general * purpose registers except x30 from the CPU context. * x30 register must be explicitly restored by the caller. * ------------------------------------------------------------------ */ func restore_gp_pmcr_pauth_regs #if CTX_INCLUDE_PAUTH_REGS /* Restore the ARMv8.3 PAuth keys */ add x10, sp, #CTX_PAUTH_REGS_OFFSET ldp x0, x1, [x10, #CTX_PACIAKEY_LO] /* x1:x0 = APIAKey */ ldp x2, x3, [x10, #CTX_PACIBKEY_LO] /* x3:x2 = APIBKey */ ldp x4, x5, [x10, #CTX_PACDAKEY_LO] /* x5:x4 = APDAKey */ ldp x6, x7, [x10, #CTX_PACDBKEY_LO] /* x7:x6 = APDBKey */ ldp x8, x9, [x10, #CTX_PACGAKEY_LO] /* x9:x8 = APGAKey */ msr APIAKeyLo_EL1, x0 msr APIAKeyHi_EL1, x1 msr APIBKeyLo_EL1, x2 msr APIBKeyHi_EL1, x3 msr APDAKeyLo_EL1, x4 msr APDAKeyHi_EL1, x5 msr APDBKeyLo_EL1, x6 msr APDBKeyHi_EL1, x7 msr APGAKeyLo_EL1, x8 msr APGAKeyHi_EL1, x9 #endif /* CTX_INCLUDE_PAUTH_REGS */ /* PMUv3 is presumed to be always present */ ldr x0, [sp, #CTX_EL3STATE_OFFSET + CTX_PMCR_EL0] msr pmcr_el0, x0 ldp x0, x1, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X0] ldp x2, x3, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X2] ldp x4, x5, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X4] ldp x6, x7, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X6] ldp x8, x9, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X8] ldp x10, x11, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X10] ldp x12, x13, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X12] ldp x14, x15, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X14] ldp x16, x17, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X16] ldp x18, x19, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X18] ldp x20, x21, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X20] ldp x22, x23, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X22] ldp x24, x25, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X24] ldp x26, x27, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X26] ldr x28, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_SP_EL0] msr sp_el0, x28 ldp x28, x29, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X28] ret endfunc restore_gp_pmcr_pauth_regs #if ERRATA_SPECULATIVE_AT /* -------------------------------------------------------------------- * In case of ERRATA_SPECULATIVE_AT, save SCTLR_EL1 and TCR_EL1 * registers and update EL1 registers to disable stage1 and stage2 * page table walk. * -------------------------------------------------------------------- */ func save_and_update_ptw_el1_sys_regs /* ---------------------------------------------------------- * Save only sctlr_el1 and tcr_el1 registers * ---------------------------------------------------------- */ mrs x29, sctlr_el1 str x29, [sp, #(CTX_ERRATA_SPEC_AT_OFFSET + CTX_ERRATA_SPEC_AT_SCTLR_EL1)] mrs x29, tcr_el1 str x29, [sp, #(CTX_ERRATA_SPEC_AT_OFFSET + CTX_ERRATA_SPEC_AT_TCR_EL1)] /* ------------------------------------------------------------ * Must follow below order in order to disable page table * walk for lower ELs (EL1 and EL0). First step ensures that * page table walk is disabled for stage1 and second step * ensures that page table walker should use TCR_EL1.EPDx * bits to perform address translation. ISB ensures that CPU * does these 2 steps in order. * * 1. Update TCR_EL1.EPDx bits to disable page table walk by * stage1. * 2. Enable MMU bit to avoid identity mapping via stage2 * and force TCR_EL1.EPDx to be used by the page table * walker. * ------------------------------------------------------------ */ orr x29, x29, #(TCR_EPD0_BIT) orr x29, x29, #(TCR_EPD1_BIT) msr tcr_el1, x29 isb mrs x29, sctlr_el1 orr x29, x29, #SCTLR_M_BIT msr sctlr_el1, x29 isb ret endfunc save_and_update_ptw_el1_sys_regs #endif /* ERRATA_SPECULATIVE_AT */ /* ----------------------------------------------------------------- * The below macro returns the address of the per_world context for * the security state, retrieved through "get_security_state" macro. * The per_world context address is returned in the register argument. * Clobbers: x9, x10 * ------------------------------------------------------------------ */ .macro get_per_world_context _reg:req ldr x10, [sp, #CTX_EL3STATE_OFFSET + CTX_SCR_EL3] get_security_state x9, x10 mov_imm x10, (CTX_PERWORLD_EL3STATE_END - CTX_CPTR_EL3) mul x9, x9, x10 adrp x10, per_world_context add x10, x10, :lo12:per_world_context add x9, x9, x10 mov \_reg, x9 .endm /* ------------------------------------------------------------------ * This routine assumes that the SP_EL3 is pointing to a valid * context structure from where the gp regs and other special * registers can be retrieved. * ------------------------------------------------------------------ */ func el3_exit #if ENABLE_ASSERTIONS /* el3_exit assumes SP_EL0 on entry */ mrs x17, spsel cmp x17, #MODE_SP_EL0 ASM_ASSERT(eq) #endif /* ENABLE_ASSERTIONS */ /* ---------------------------------------------------------- * Save the current SP_EL0 i.e. the EL3 runtime stack which * will be used for handling the next SMC. * Then switch to SP_EL3. * ---------------------------------------------------------- */ mov x17, sp msr spsel, #MODE_SP_ELX str x17, [sp, #CTX_EL3STATE_OFFSET + CTX_RUNTIME_SP] /* ---------------------------------------------------------- * Restore CPTR_EL3. * ZCR is only restored if SVE is supported and enabled. * Synchronization is required before zcr_el3 is addressed. * ---------------------------------------------------------- */ /* The address of the per_world context is stored in x9 */ get_per_world_context x9 ldp x19, x20, [x9, #CTX_CPTR_EL3] msr cptr_el3, x19 #if IMAGE_BL31 ands x19, x19, #CPTR_EZ_BIT beq sve_not_enabled isb msr S3_6_C1_C2_0, x20 /* zcr_el3 */ sve_not_enabled: restore_mpam3_el3 #endif /* IMAGE_BL31 */ #if IMAGE_BL31 && DYNAMIC_WORKAROUND_CVE_2018_3639 /* ---------------------------------------------------------- * Restore mitigation state as it was on entry to EL3 * ---------------------------------------------------------- */ ldr x17, [sp, #CTX_CVE_2018_3639_OFFSET + CTX_CVE_2018_3639_DISABLE] cbz x17, 1f blr x17 1: #endif /* IMAGE_BL31 && DYNAMIC_WORKAROUND_CVE_2018_3639 */ #if IMAGE_BL31 synchronize_errors #endif /* IMAGE_BL31 */ /* -------------------------------------------------------------- * Restore MDCR_EL3, SPSR_EL3, ELR_EL3 and SCR_EL3 prior to ERET * -------------------------------------------------------------- */ ldp x16, x17, [sp, #CTX_EL3STATE_OFFSET + CTX_SPSR_EL3] ldr x18, [sp, #CTX_EL3STATE_OFFSET + CTX_SCR_EL3] ldr x19, [sp, #CTX_EL3STATE_OFFSET + CTX_MDCR_EL3] msr spsr_el3, x16 msr elr_el3, x17 msr scr_el3, x18 msr mdcr_el3, x19 restore_ptw_el1_sys_regs /* ---------------------------------------------------------- * Restore general purpose (including x30), PMCR_EL0 and * ARMv8.3-PAuth registers. * Exit EL3 via ERET to a lower exception level. * ---------------------------------------------------------- */ bl restore_gp_pmcr_pauth_regs ldr x30, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_LR] #ifdef IMAGE_BL31 /* Clear the EL3 flag as we are exiting el3 */ str xzr, [sp, #CTX_EL3STATE_OFFSET + CTX_NESTED_EA_FLAG] #endif /* IMAGE_BL31 */ exception_return endfunc el3_exit