/* * Copyright (c) 2021-2024, ARM Limited and Contributors. All rights reserved. * Copyright (c) 2021-2024, MediaTek Inc. All rights reserved. * * SPDX-License-Identifier: BSD-3-Clause */ #ifndef PLATFORM_DEF_H #define PLATFORM_DEF_H #define PLAT_PRIMARY_CPU (0x0) #define MT_GIC_BASE (0x0C000000) #define MCUCFG_BASE (0x0C530000) #define IO_PHYS (0x10000000) /* Aggregate of all devices for MMU mapping */ #define MTK_DEV_RNG0_BASE IO_PHYS #define MTK_DEV_RNG0_SIZE (0x10000000) #define MTK_DEV_RNG2_BASE MT_GIC_BASE #define MTK_DEV_RNG2_SIZE (0x600000) #define MTK_MCDI_SRAM_BASE (0x11B000) #define MTK_MCDI_SRAM_MAP_SIZE (0x1000) #define TOPCKGEN_BASE (IO_PHYS + 0x00000000) #define INFRACFG_AO_BASE (IO_PHYS + 0x00001000) #define SPM_BASE (IO_PHYS + 0x00006000) #define APMIXEDSYS (IO_PHYS + 0x0000C000) #define SSPM_MCDI_SHARE_SRAM (IO_PHYS + 0x00420000) #define SSPM_CFGREG_BASE (IO_PHYS + 0x00440000) /* SSPM view: 0x30040000 */ #define SSPM_MBOX_BASE (IO_PHYS + 0x00480000) #define PERICFG_AO_BASE (IO_PHYS + 0x01003000) #define VPPSYS0_BASE (IO_PHYS + 0x04000000) #define VPPSYS1_BASE (IO_PHYS + 0x04f00000) #define VDOSYS0_BASE (IO_PHYS + 0x0C01A000) #define VDOSYS1_BASE (IO_PHYS + 0x0C100000) /******************************************************************************* * GPIO related constants ******************************************************************************/ #define TOPCKGEN_BASE (IO_PHYS + 0x00000000) #define INFRACFG_AO_BASE (IO_PHYS + 0x00001000) #define GPIO_BASE (IO_PHYS + 0x00005000) #define SPM_BASE (IO_PHYS + 0x00006000) #define IOCFG_LT_BASE (IO_PHYS + 0x00002000) #define IOCFG_LM_BASE (IO_PHYS + 0x00002200) #define IOCFG_LB_BASE (IO_PHYS + 0x00002400) #define IOCFG_BL_BASE (IO_PHYS + 0x00002600) #define IOCFG_RB_BASE (IO_PHYS + 0x00002A00) #define IOCFG_RT_BASE (IO_PHYS + 0x00002C00) #define APMIXEDSYS (IO_PHYS + 0x0000C000) #define DVFSRC_BASE (IO_PHYS + 0x00012000) #define MMSYS_BASE (IO_PHYS + 0x04000000) #define MDPSYS_BASE (IO_PHYS + 0x0B000000) /******************************************************************************* * UART related constants ******************************************************************************/ #define UART0_BASE (IO_PHYS + 0x01002000) #define UART1_BASE (IO_PHYS + 0x01003000) #define UART_BAUDRATE (115200) /******************************************************************************* * PWRAP related constants ******************************************************************************/ #define PMIC_WRAP_BASE (IO_PHYS + 0x0000D000) /******************************************************************************* * EMI MPU related constants ******************************************************************************/ #define EMI_MPU_BASE (IO_PHYS + 0x0021B000) /******************************************************************************* * MSDC related constants ******************************************************************************/ #define MSDC0_BASE (IO_PHYS + 0x01230000) /******************************************************************************* * TRNG related constants ******************************************************************************/ #define TRNG_BASE (IO_PHYS + 0x0020F000) /******************************************************************************* * GIC-600 & interrupt handling related constants ******************************************************************************/ /* Base MTK_platform compatible GIC memory map */ #define BASE_GICD_BASE MT_GIC_BASE #define MT_GIC_RDIST_BASE (MT_GIC_BASE + 0x40000) #define PLAT_MTK_G1S_IRQ_PROPS(grp) #define SYS_CIRQ_BASE (IO_PHYS + 0x204000) #define CIRQ_REG_NUM (11) #define CIRQ_IRQ_NUM (326) #define CIRQ_SPI_START (64) #define MD_WDT_IRQ_BIT_ID (107) /******************************************************************************* * System counter frequency related constants ******************************************************************************/ #define SYS_COUNTER_FREQ_IN_TICKS (13000000) #define SYS_COUNTER_FREQ_IN_MHZ (13) /******************************************************************************* * Platform binary types for linking ******************************************************************************/ #define PLATFORM_LINKER_FORMAT "elf64-littleaarch64" #define PLATFORM_LINKER_ARCH aarch64 /******************************************************************************* * Generic platform constants ******************************************************************************/ #define PLATFORM_STACK_SIZE 0x800 #define FIRMWARE_WELCOME_STR "Booting Trusted Firmware\n" #define PLAT_MAX_PWR_LVL U(3) #define PLAT_MAX_RET_STATE U(1) #define PLAT_MAX_OFF_STATE U(9) #define PLATFORM_SYSTEM_COUNT U(1) #define PLATFORM_MCUSYS_COUNT U(1) #define PLATFORM_CLUSTER_COUNT U(1) #define PLATFORM_CLUSTER0_CORE_COUNT U(8) #define PLATFORM_CLUSTER1_CORE_COUNT U(0) #define PLATFORM_CORE_COUNT (PLATFORM_CLUSTER0_CORE_COUNT) #define PLATFORM_MAX_CPUS_PER_CLUSTER U(8) #define SOC_CHIP_ID U(0x8186) /******************************************************************************* * Platform memory map related constants ******************************************************************************/ #define TZRAM_BASE (0x54600000) #define TZRAM_SIZE (0x00030000) /******************************************************************************* * BL31 specific defines. ******************************************************************************/ /* * Put BL3-1 at the top of the Trusted SRAM (just below the shared memory, if * present). BL31_BASE is calculated using the current BL3-1 debug size plus a * little space for growth. */ #define BL31_BASE (TZRAM_BASE + 0x1000) #define BL31_LIMIT (TZRAM_BASE + TZRAM_SIZE) /******************************************************************************* * Platform specific page table and MMU setup constants ******************************************************************************/ #define PLAT_PHY_ADDR_SPACE_SIZE (1ULL << 32) #define PLAT_VIRT_ADDR_SPACE_SIZE (1ULL << 32) #define MAX_XLAT_TABLES (16) #define MAX_MMAP_REGIONS (16) /******************************************************************************* * Declarations and constants to access the mailboxes safely. Each mailbox is * aligned on the biggest cache line size in the platform. This is known only * to the platform as it might have a combination of integrated and external * caches. Such alignment ensures that two maiboxes do not sit on the same cache * line at any cache level. They could belong to different cpus/clusters & * get written while being protected by different locks causing corruption of * a valid mailbox address. ******************************************************************************/ #define CACHE_WRITEBACK_SHIFT (6) #define CACHE_WRITEBACK_GRANULE BIT(CACHE_WRITEBACK_SHIFT) #endif /* PLATFORM_DEF_H */