123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384 |
- /*
- * Copyright (c) 2023-2024, Arm Limited. All rights reserved.
- *
- * SPDX-License-Identifier: BSD-3-Clause
- */
- #define GIC_CTRL_ADDR 2c010000
- #define GIC_GICR_OFFSET 0x200000
- #define UART_OFFSET 0x1000
- #ifdef TC_RESOLUTION_1920X1080P60
- #define LCD_TIMING_CLK 148500000
- #define LCD_TIMING \
- clock-frequency = <LCD_TIMING_CLK>; \
- hactive = <1920>; \
- vactive = <1080>; \
- hfront-porch = <88>; \
- hback-porch = <148>; \
- hsync-len = <44>; \
- vfront-porch = <4>; \
- vback-porch = <36>; \
- vsync-len = <5>
- #else /* TC_RESOLUTION_640X480P60 */
- #define LCD_TIMING_CLK 25175000
- #define LCD_TIMING \
- clock-frequency = <LCD_TIMING_CLK>; \
- hactive = <640>; \
- vactive = <480>; \
- hfront-porch = <16>; \
- hback-porch = <48>; \
- hsync-len = <96>; \
- vfront-porch = <10>; \
- vback-porch = <33>; \
- vsync-len = <2>
- #endif
- / {
- chosen {
- stdout-path = "serial0:115200n8";
- };
- ethernet: ethernet@ETHERNET_ADDR {
- compatible = "smsc,lan91c111";
- };
- mmci: mmci@MMC_ADDR {
- cd-gpios = <&sysreg 0 0>;
- };
- rtc@RTC_ADDR {
- compatible = "arm,pl031", "arm,primecell";
- reg = <0x0 ADDRESSIFY(RTC_ADDR) 0x0 0x1000>;
- interrupts = <GIC_SPI RTC_INT IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&soc_refclk>;
- clock-names = "apb_pclk";
- };
- kmi@KMI_0_ADDR {
- compatible = "arm,pl050", "arm,primecell";
- reg = <0x0 ADDRESSIFY(KMI_0_ADDR) 0x0 0x1000>;
- interrupts = <GIC_SPI KMI_0_INT IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&bp_clock24mhz>, <&bp_clock24mhz>;
- clock-names = "KMIREFCLK", "apb_pclk";
- };
- kmi@1c070000 {
- compatible = "arm,pl050", "arm,primecell";
- reg = <0x0 0x001c070000 0x0 0x1000>;
- interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&bp_clock24mhz>, <&bp_clock24mhz>;
- clock-names = "KMIREFCLK", "apb_pclk";
- };
- virtio_block@VIRTIO_BLOCK_ADDR {
- compatible = "virtio,mmio";
- reg = <0x0 ADDRESSIFY(VIRTIO_BLOCK_ADDR) 0x0 0x200>;
- /* spec lists this wrong */
- interrupts = <GIC_SPI VIRTIO_BLOCK_INT IRQ_TYPE_LEVEL_HIGH 0>;
- };
- };
|