plat_dfd.c 2.6 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586878889909192939495969798
  1. /*
  2. * Copyright (c) 2022, MediaTek Inc. All rights reserved.
  3. *
  4. * SPDX-License-Identifier: BSD-3-Clause
  5. */
  6. #include <arch_helpers.h>
  7. #include <common/debug.h>
  8. #include <lib/mmio.h>
  9. #include <mtk_sip_svc.h>
  10. #include <plat_dfd.h>
  11. static bool dfd_enabled;
  12. static uint64_t dfd_base_addr;
  13. static uint64_t dfd_chain_length;
  14. static uint64_t dfd_cache_dump;
  15. static void dfd_setup(uint64_t base_addr, uint64_t chain_length,
  16. uint64_t cache_dump)
  17. {
  18. mmio_write_32(MCUSYS_DFD_MAP, base_addr >> 24);
  19. mmio_write_32(WDT_DEBUG_CTL, WDT_DEBUG_CTL_VAL_0);
  20. sync_writel(DFD_INTERNAL_CTL, (BIT(0) | BIT(2)));
  21. mmio_setbits_32(DFD_INTERNAL_CTL, BIT(13));
  22. mmio_setbits_32(DFD_INTERNAL_CTL, BIT(3));
  23. mmio_setbits_32(DFD_INTERNAL_CTL, (BIT(19) | BIT(20)));
  24. mmio_write_32(DFD_INTERNAL_PWR_ON, (BIT(0) | BIT(1) | BIT(3)));
  25. mmio_write_32(DFD_CHAIN_LENGTH0, chain_length);
  26. mmio_write_32(DFD_INTERNAL_SHIFT_CLK_RATIO, 0);
  27. mmio_write_32(DFD_INTERNAL_TEST_SO_0, DFD_INTERNAL_TEST_SO_0_VAL);
  28. mmio_write_32(DFD_INTERNAL_NUM_OF_TEST_SO_GROUP, 1);
  29. mmio_write_32(DFD_TEST_SI_0, DFD_TEST_SI_0_VAL);
  30. mmio_write_32(DFD_TEST_SI_1, DFD_TEST_SI_1_VAL);
  31. sync_writel(DFD_V30_CTL, 1);
  32. mmio_write_32(DFD_V30_BASE_ADDR, (base_addr & 0xFFF00000));
  33. /* setup global variables for suspend and resume */
  34. dfd_enabled = true;
  35. dfd_base_addr = base_addr;
  36. dfd_chain_length = chain_length;
  37. dfd_cache_dump = cache_dump;
  38. if ((cache_dump & DFD_CACHE_DUMP_ENABLE) != 0UL) {
  39. mmio_write_32(WDT_DEBUG_CTL, WDT_DEBUG_CTL_VAL_1);
  40. sync_writel(DFD_V35_ENALBE, 1);
  41. sync_writel(DFD_V35_TAP_NUMBER, DFD_V35_TAP_NUMBER_VAL);
  42. sync_writel(DFD_V35_TAP_EN, DFD_V35_TAP_EN_VAL);
  43. sync_writel(DFD_V35_SEQ0_0, DFD_V35_SEQ0_0_VAL);
  44. if (cache_dump & DFD_PARITY_ERR_TRIGGER) {
  45. sync_writel(DFD_HW_TRIGGER_MASK, DFD_HW_TRIGGER_MASK_VAL);
  46. mmio_setbits_32(DFD_INTERNAL_CTL, BIT(4));
  47. }
  48. }
  49. dsbsy();
  50. }
  51. void dfd_resume(void)
  52. {
  53. if (dfd_enabled == true) {
  54. dfd_setup(dfd_base_addr, dfd_chain_length, dfd_cache_dump);
  55. }
  56. }
  57. uint64_t dfd_smc_dispatcher(uint64_t arg0, uint64_t arg1,
  58. uint64_t arg2, uint64_t arg3)
  59. {
  60. uint64_t ret = 0L;
  61. switch (arg0) {
  62. case PLAT_MTK_DFD_SETUP_MAGIC:
  63. INFO("[%s] DFD setup call from kernel\n", __func__);
  64. dfd_setup(arg1, arg2, arg3);
  65. break;
  66. case PLAT_MTK_DFD_READ_MAGIC:
  67. /* only allow to access DFD register base + 0x200 */
  68. if (arg1 <= 0x200) {
  69. ret = mmio_read_32(MISC1_CFG_BASE + arg1);
  70. }
  71. break;
  72. case PLAT_MTK_DFD_WRITE_MAGIC:
  73. /* only allow to access DFD register base + 0x200 */
  74. if (arg1 <= 0x200) {
  75. sync_writel(MISC1_CFG_BASE + arg1, arg2);
  76. }
  77. break;
  78. default:
  79. ret = MTK_SIP_E_INVALID_PARAM;
  80. break;
  81. }
  82. return ret;
  83. }