123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227 |
- /*
- * Copyright (c) 2016-2020, ARM Limited and Contributors. All rights reserved.
- *
- * SPDX-License-Identifier: BSD-3-Clause
- */
- #include <arch.h>
- #include <asm_macros.S>
- #include <assert_macros.S>
- #include <console_macros.S>
- #include <drivers/cadence/cdns_uart.h>
- /*
- * "core" functions are low-level implementations that don't require
- * writable memory and are thus safe to call in BL1 crash context.
- */
- .globl console_cdns_core_init
- .globl console_cdns_core_putc
- .globl console_cdns_core_getc
- .globl console_cdns_core_flush
- .globl console_cdns_putc
- .globl console_cdns_getc
- .globl console_cdns_flush
- /* -----------------------------------------------
- * int console_cdns_core_init(uintptr_t base_addr)
- * Function to initialize the console without a
- * C Runtime to print debug information. This
- * function will be accessed by console_init and
- * crash reporting.
- * We assume that the bootloader already set up
- * the HW (baud, ...) and only enable the trans-
- * mitter and receiver here.
- * In: x0 - console base address
- * Out: return 1 on success else 0 on error
- * Clobber list : x1, x2, x3
- * -----------------------------------------------
- */
- func console_cdns_core_init
- /* Check the input base address */
- cbz x0, core_init_fail
- /* RX/TX enabled & reset */
- mov w3, #(R_UART_CR_TX_EN | R_UART_CR_RX_EN | R_UART_CR_TXRST | R_UART_CR_RXRST)
- str w3, [x0, #R_UART_CR]
- mov w0, #1
- ret
- core_init_fail:
- mov w0, wzr
- ret
- endfunc console_cdns_core_init
- .globl console_cdns_register
- /* -----------------------------------------------
- * int console_cdns_register(uintptr_t baseaddr,
- * uint32_t clock, uint32_t baud,
- * console_t *console);
- * Function to initialize and register a new CDNS
- * console. Storage passed in for the console struct
- * *must* be persistent (i.e. not from the stack).
- * In: x0 - UART register base address
- * w1 - UART clock in Hz
- * w2 - Baud rate
- * x3 - pointer to empty console_t struct
- * Out: return 1 on success, 0 on error
- * Clobber list : x0, x1, x2, x6, x7, x14
- * -----------------------------------------------
- */
- func console_cdns_register
- mov x7, x30
- mov x6, x3
- cbz x6, register_fail
- str x0, [x6, #CONSOLE_T_BASE]
- bl console_cdns_core_init
- cbz x0, register_fail
- mov x0, x6
- mov x30, x7
- finish_console_register cdns putc=1, getc=ENABLE_CONSOLE_GETC, flush=1
- register_fail:
- ret x7
- endfunc console_cdns_register
- /* --------------------------------------------------------
- * int console_cdns_core_putc(int c, uintptr_t base_addr)
- * Function to output a character over the console. It
- * returns the character printed on success or -1 on error.
- * In : w0 - character to be printed
- * x1 - console base address
- * Out : return -1 on error else return character.
- * Clobber list : x2
- * --------------------------------------------------------
- */
- func console_cdns_core_putc
- #if ENABLE_ASSERTIONS
- cmp x1, #0
- ASM_ASSERT(ne)
- #endif /* ENABLE_ASSERTIONS */
- /* Prepend '\r' to '\n' */
- cmp w0, #0xA
- b.ne 2f
- 1:
- /* Check if the transmit FIFO is empty */
- ldr w2, [x1, #R_UART_SR]
- tbz w2, #UART_SR_INTR_TEMPTY_BIT, 1b
- mov w2, #0xD
- str w2, [x1, #R_UART_TX]
- 2:
- /* Check if the transmit FIFO is empty */
- ldr w2, [x1, #R_UART_SR]
- tbz w2, #UART_SR_INTR_TEMPTY_BIT, 2b
- str w0, [x1, #R_UART_TX]
- ret
- endfunc console_cdns_core_putc
- /* --------------------------------------------------------
- * int console_cdns_putc(int c, console_t *cdns)
- * Function to output a character over the console. It
- * returns the character printed on success or -1 on error.
- * In : w0 - character to be printed
- * x1 - pointer to console_t structure
- * Out : return -1 on error else return character.
- * Clobber list : x2
- * --------------------------------------------------------
- */
- func console_cdns_putc
- #if ENABLE_ASSERTIONS
- cmp x1, #0
- ASM_ASSERT(ne)
- #endif /* ENABLE_ASSERTIONS */
- ldr x1, [x1, #CONSOLE_T_BASE]
- b console_cdns_core_putc
- endfunc console_cdns_putc
- /* ---------------------------------------------
- * int console_cdns_core_getc(uintptr_t base_addr)
- * Function to get a character from the console.
- * It returns the character grabbed on success
- * or -1 if no character is available.
- * In : x0 - console base address
- * Out: w0 - character if available, else -1
- * Clobber list : x0, x1
- * ---------------------------------------------
- */
- func console_cdns_core_getc
- #if ENABLE_ASSERTIONS
- cmp x0, #0
- ASM_ASSERT(ne)
- #endif /* ENABLE_ASSERTIONS */
- /* Check if the receive FIFO is empty */
- ldr w1, [x0, #R_UART_SR]
- tbnz w1, #UART_SR_INTR_REMPTY_BIT, no_char
- ldr w1, [x0, #R_UART_RX]
- mov w0, w1
- ret
- no_char:
- mov w0, #ERROR_NO_PENDING_CHAR
- ret
- endfunc console_cdns_core_getc
- /* ---------------------------------------------
- * int console_cdns_getc(console_t *console)
- * Function to get a character from the console.
- * It returns the character grabbed on success
- * or -1 if no character is available.
- * In : x0 - pointer to console_t structure
- * Out: w0 - character if available, else -1
- * Clobber list : x0, x1
- * ---------------------------------------------
- */
- func console_cdns_getc
- #if ENABLE_ASSERTIONS
- cmp x0, #0
- ASM_ASSERT(ne)
- #endif /* ENABLE_ASSERTIONS */
- ldr x0, [x0, #CONSOLE_T_BASE]
- b console_cdns_core_getc
- endfunc console_cdns_getc
- /* ---------------------------------------------
- * void console_cdns_core_flush(uintptr_t base_addr)
- * Function to force a write of all buffered
- * data that hasn't been output.
- * In : x0 - console base address
- * Out : void
- * Clobber list : x0, x1
- * ---------------------------------------------
- */
- func console_cdns_core_flush
- #if ENABLE_ASSERTIONS
- cmp x0, #0
- ASM_ASSERT(ne)
- #endif /* ENABLE_ASSERTIONS */
- /* Loop until the transmit FIFO is empty */
- check_txfifo_empty:
- ldr w2, [x0, #R_UART_SR]
- tbz w2, #UART_SR_INTR_TEMPTY_BIT, check_txfifo_empty
- /* Wait until the Transmit is Inactive */
- check_tx_inactive_state:
- ldr w2, [x0, #R_UART_SR]
- tbnz w2, #UART_SR_INTR_TACTIVE_BIT, check_tx_inactive_state
- ret
- endfunc console_cdns_core_flush
- /* ---------------------------------------------
- * void console_cdns_flush(console_t *console)
- * Function to force a write of all buffered
- * data that hasn't been output.
- * In : x0 - pointer to console_t structure
- * Out : void.
- * Clobber list : x0, x1
- * ---------------------------------------------
- */
- func console_cdns_flush
- #if ENABLE_ASSERTIONS
- cmp x0, #0
- ASM_ASSERT(ne)
- #endif /* ENABLE_ASSERTIONS */
- ldr x0, [x0, #CONSOLE_T_BASE]
- b console_cdns_core_flush
- endfunc console_cdns_flush
|