arm-trusted-firmware/drivers/st/ddr/stm32mp1_ram.c

/*
 * Copyright (C) 2018-2023, STMicroelectronics - All Rights Reserved
 *
 * SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
 */

#include <errno.h>

#include <arch_helpers.h>
#include <common/debug.h>
#include <common/fdt_wrappers.h>
#include <drivers/clk.h>
#include <drivers/st/stm32mp1_ddr.h>
#include <drivers/st/stm32mp1_ddr_helpers.h>
#include <drivers/st/stm32mp1_ram.h>
#include <drivers/st/stm32mp_ddr.h>
#include <drivers/st/stm32mp_ddr_test.h>
#include <drivers/st/stm32mp_ram.h>
#include <lib/mmio.h>
#include <libfdt.h>

#include <platform_def.h>

static struct stm32mp_ddr_priv ddr_priv_data;

int stm32mp1_ddr_clk_enable(struct stm32mp_ddr_priv *priv, uint32_t mem_speed)
{
	unsigned long ddrphy_clk, ddr_clk, mem_speed_hz;

	ddr_enable_clock();

	ddrphy_clk = clk_get_rate(DDRPHYC);

	VERBOSE("DDR: mem_speed (%u kHz), RCC %lu kHz\n",
		mem_speed, ddrphy_clk / 1000U);

	mem_speed_hz = mem_speed * 1000U;

	/* Max 10% frequency delta */
	if (ddrphy_clk > mem_speed_hz) {
		ddr_clk = ddrphy_clk - mem_speed_hz;
	} else {
		ddr_clk = mem_speed_hz - ddrphy_clk;
	}
	if (ddr_clk > (mem_speed_hz / 10)) {
		ERROR("DDR expected freq %u kHz, current is %lu kHz\n",
		      mem_speed, ddrphy_clk / 1000U);
		return -1;
	}
	return 0;
}

static int stm32mp1_ddr_setup(void)
{
	struct stm32mp_ddr_priv *priv = &ddr_priv_data;
	int ret;
	struct stm32mp_ddr_config config;
	int node;
	uintptr_t uret;
	size_t retsize;
	void *fdt;

	const struct stm32mp_ddr_param param[] = {
		CTL_PARAM(reg),
		CTL_PARAM(timing),
		CTL_PARAM(map),
		CTL_PARAM(perf),
		PHY_PARAM(reg),
		PHY_PARAM(timing),
	};

	if (fdt_get_address(&fdt) == 0) {
		return -ENOENT;
	}

	node = fdt_node_offset_by_compatible(fdt, -1, DT_DDR_COMPAT);
	if (node < 0) {
		ERROR("%s: Cannot read DDR node in DT\n", __func__);
		return -EINVAL;
	}

	ret = stm32mp_ddr_dt_get_info(fdt, node, &config.info);
	if (ret < 0) {
		return ret;
	}

	ret = stm32mp_ddr_dt_get_param(fdt, node, param, ARRAY_SIZE(param), (uintptr_t)&config);
	if (ret < 0) {
		return ret;
	}

	/* Disable axidcg clock gating during init */
	mmio_clrbits_32(priv->rcc + RCC_DDRITFCR, RCC_DDRITFCR_AXIDCGEN);

	stm32mp1_ddr_init(priv, &config);

	/* Enable axidcg clock gating */
	mmio_setbits_32(priv->rcc + RCC_DDRITFCR, RCC_DDRITFCR_AXIDCGEN);

	priv->info.size = config.info.size;

	VERBOSE("%s : ram size(%x, %x)\n", __func__,
		(uint32_t)priv->info.base, (uint32_t)priv->info.size);

	if (stm32mp_map_ddr_non_cacheable() != 0) {
		panic();
	}

	uret = stm32mp_ddr_test_data_bus();
	if (uret != 0UL) {
		ERROR("DDR data bus test: can't access memory @ 0x%lx\n",
		      uret);
		panic();
	}

	uret = stm32mp_ddr_test_addr_bus(config.info.size);
	if (uret != 0UL) {
		ERROR("DDR addr bus test: can't access memory @ 0x%lx\n",
		      uret);
		panic();
	}

	retsize = stm32mp_ddr_check_size();
	if (retsize < config.info.size) {
		ERROR("DDR size: 0x%zx does not match DT config: 0x%zx\n",
		      retsize, config.info.size);
		panic();
	}

	INFO("Memory size = 0x%zx (%zu MB)\n", retsize, retsize / (1024U * 1024U));

	if (stm32mp_unmap_ddr() != 0) {
		panic();
	}

	return 0;
}

int stm32mp1_ddr_probe(void)
{
	struct stm32mp_ddr_priv *priv = &ddr_priv_data;

	VERBOSE("STM32MP DDR probe\n");

	priv->ctl = (struct stm32mp_ddrctl *)stm32mp_ddrctrl_base();
	priv->phy = (struct stm32mp_ddrphy *)stm32mp_ddrphyc_base();
	priv->pwr = stm32mp_pwr_base();
	priv->rcc = stm32mp_rcc_base();

	priv->info.base = STM32MP_DDR_BASE;
	priv->info.size = 0;

	return stm32mp1_ddr_setup();
}