123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287 |
- # Copyright (c) 2021-2024, Arm Limited. All rights reserved.
- #
- # SPDX-License-Identifier: BSD-3-Clause
- #
- include common/fdt_wrappers.mk
- TARGET_FLAVOUR := fvp
- # DPU with SCMI may not necessarily work, so allow its independence
- TC_DPU_USE_SCMI_CLK := 1
- # SCMI power domain control enable
- TC_SCMI_PD_CTRL_EN := 1
- # System setup
- CSS_USE_SCMI_SDS_DRIVER := 1
- HW_ASSISTED_COHERENCY := 1
- USE_COHERENT_MEM := 0
- GIC_ENABLE_V4_EXTN := 1
- GICV3_SUPPORT_GIC600 := 1
- override NEED_BL2U := no
- override ARM_PLAT_MT := 1
- # CPU setup
- ARM_ARCH_MINOR := 7
- BRANCH_PROTECTION := 1
- ENABLE_FEAT_MPAM := 1 # default is 2, optimise
- ENABLE_SVE_FOR_NS := 2 # to show we use it
- ENABLE_SVE_FOR_SWD := 1
- ENABLE_SME_FOR_NS := 2
- ENABLE_SME2_FOR_NS := 2
- ENABLE_SME_FOR_SWD := 1
- ENABLE_TRBE_FOR_NS := 1
- ENABLE_SYS_REG_TRACE_FOR_NS := 1
- ENABLE_FEAT_AMU := 1
- ENABLE_AMU_FCONF := 1
- ENABLE_AMU_AUXILIARY_COUNTERS := 1
- ENABLE_MPMM := 1
- ENABLE_MPMM_FCONF := 1
- ENABLE_FEAT_MTE2 := 2
- ENABLE_SPE_FOR_NS := 3
- ENABLE_FEAT_TCR2 := 3
- CTX_INCLUDE_AARCH32_REGS := 0
- ifeq (${SPD},spmd)
- SPMD_SPM_AT_SEL2 := 1
- CTX_INCLUDE_PAUTH_REGS := 1
- endif
- # TC RESOLUTION - LIST OF VALID OPTIONS (this impacts only FVP)
- TC_RESOLUTION_OPTIONS := 640x480p60 \
- 1920x1080p60
- # Set default to the 640x480p60 resolution mode
- TC_RESOLUTION ?= $(firstword $(TC_RESOLUTION_OPTIONS))
- # Check resolution option for FVP
- ifneq ($(filter ${TARGET_FLAVOUR}, fvp),)
- ifeq ($(filter ${TC_RESOLUTION}, ${TC_RESOLUTION_OPTIONS}),)
- $(error TC_RESOLUTION is ${TC_RESOLUTION}, it must be: ${TC_RESOLUTION_OPTIONS})
- endif
- endif
- ifneq ($(shell expr $(TARGET_PLATFORM) \<= 1), 0)
- $(error Platform ${PLAT}$(TARGET_PLATFORM) is no longer available.)
- endif
- ifneq ($(shell expr $(TARGET_PLATFORM) = 2), 0)
- $(warning Platform ${PLAT}$(TARGET_PLATFORM) is deprecated. \
- Some of the features might not work as expected)
- endif
- ifeq ($(shell expr $(TARGET_PLATFORM) \<= 4), 0)
- $(error TARGET_PLATFORM must be less than or equal to 4)
- endif
- ifeq ($(filter ${TARGET_FLAVOUR}, fvp fpga),)
- $(error TARGET_FLAVOUR must be fvp or fpga)
- endif
- $(eval $(call add_defines, \
- TARGET_PLATFORM \
- TARGET_FLAVOUR_$(call uppercase,${TARGET_FLAVOUR}) \
- TC_RESOLUTION_$(call uppercase,${TC_RESOLUTION}) \
- TC_DPU_USE_SCMI_CLK \
- TC_SCMI_PD_CTRL_EN \
- ))
- CSS_LOAD_SCP_IMAGES := 1
- # Save DSU PMU registers on cluster off and restore them on cluster on
- PRESERVE_DSU_PMU_REGS := 1
- # Specify MHU type based on platform
- ifneq ($(filter ${TARGET_PLATFORM}, 2),)
- PLAT_MHU_VERSION := 2
- else
- PLAT_MHU_VERSION := 3
- endif
- # Include GICv3 driver files
- include drivers/arm/gic/v3/gicv3.mk
- ENT_GIC_SOURCES := ${GICV3_SOURCES} \
- plat/common/plat_gicv3.c \
- plat/arm/common/arm_gicv3.c
- TC_BASE = plat/arm/board/tc
- PLAT_INCLUDES += -I${TC_BASE}/include/ \
- -I${TC_BASE}/fdts/
- # CPU libraries for TARGET_PLATFORM=1
- ifeq (${TARGET_PLATFORM}, 1)
- TC_CPU_SOURCES += lib/cpus/aarch64/cortex_a510.S \
- lib/cpus/aarch64/cortex_a715.S \
- lib/cpus/aarch64/cortex_x3.S
- endif
- # CPU libraries for TARGET_PLATFORM=2
- ifeq (${TARGET_PLATFORM}, 2)
- ERRATA_A520_2938996 := 1
- ERRATA_X4_2726228 := 1
- TC_CPU_SOURCES += lib/cpus/aarch64/cortex_a520.S \
- lib/cpus/aarch64/cortex_a720.S \
- lib/cpus/aarch64/cortex_x4.S
- endif
- # CPU libraries for TARGET_PLATFORM=3
- ifeq (${TARGET_PLATFORM}, 3)
- ERRATA_A520_2938996 := 1
- TC_CPU_SOURCES += lib/cpus/aarch64/cortex_a520.S \
- lib/cpus/aarch64/cortex_a725.S \
- lib/cpus/aarch64/cortex_x925.S
- endif
- # CPU libraries for TARGET_PLATFORM=4
- ifeq (${TARGET_PLATFORM}, 4)
- TC_CPU_SOURCES += lib/cpus/aarch64/cortex_gelas.S \
- lib/cpus/aarch64/nevis.S \
- lib/cpus/aarch64/travis.S
- endif
- INTERCONNECT_SOURCES := ${TC_BASE}/tc_interconnect.c \
- plat/arm/common/arm_ni.c
- PLAT_BL_COMMON_SOURCES += ${TC_BASE}/tc_plat.c \
- ${TC_BASE}/include/tc_helpers.S
- BL1_SOURCES += ${INTERCONNECT_SOURCES} \
- ${TC_CPU_SOURCES} \
- ${TC_BASE}/tc_trusted_boot.c \
- ${TC_BASE}/tc_bl1_setup.c \
- ${TC_BASE}/tc_err.c \
- drivers/arm/sbsa/sbsa.c
- BL2_SOURCES += ${TC_BASE}/tc_security.c \
- ${TC_BASE}/tc_err.c \
- ${TC_BASE}/tc_trusted_boot.c \
- ${TC_BASE}/tc_bl2_setup.c \
- lib/utils/mem_region.c \
- drivers/arm/tzc/tzc400.c \
- plat/arm/common/arm_nor_psci_mem_protect.c
- ifeq ($(shell test $(TARGET_PLATFORM) -le 2; echo $$?),0)
- BL2_SOURCES += plat/arm/common/arm_tzc400.c
- endif
- BL31_SOURCES += ${INTERCONNECT_SOURCES} \
- ${TC_CPU_SOURCES} \
- ${ENT_GIC_SOURCES} \
- ${TC_BASE}/tc_bl31_setup.c \
- ${TC_BASE}/tc_topology.c \
- lib/fconf/fconf.c \
- lib/fconf/fconf_dyn_cfg_getter.c \
- drivers/arm/css/dsu/dsu.c \
- drivers/cfi/v2m/v2m_flash.c \
- lib/utils/mem_region.c \
- plat/arm/common/arm_nor_psci_mem_protect.c \
- drivers/arm/sbsa/sbsa.c
- BL31_SOURCES += ${FDT_WRAPPERS_SOURCES}
- # Add the FDT_SOURCES and options for Dynamic Config
- FDT_SOURCES += ${TC_BASE}/fdts/${PLAT}_fw_config.dts \
- ${TC_BASE}/fdts/${PLAT}_tb_fw_config.dts \
- ${TC_BASE}/fdts/${PLAT}_nt_fw_config.dts
- FW_CONFIG := ${BUILD_PLAT}/fdts/${PLAT}_fw_config.dtb
- TB_FW_CONFIG := ${BUILD_PLAT}/fdts/${PLAT}_tb_fw_config.dtb
- FVP_NT_FW_CONFIG := ${BUILD_PLAT}/fdts/${PLAT}_nt_fw_config.dtb
- # Add the FW_CONFIG to FIP and specify the same to certtool
- $(eval $(call TOOL_ADD_PAYLOAD,${FW_CONFIG},--fw-config,${FW_CONFIG}))
- # Add the TB_FW_CONFIG to FIP and specify the same to certtool
- $(eval $(call TOOL_ADD_PAYLOAD,${TB_FW_CONFIG},--tb-fw-config,${TB_FW_CONFIG}))
- # Add the NT_FW_CONFIG to FIP and specify the same to certtool
- $(eval $(call TOOL_ADD_PAYLOAD,${FVP_NT_FW_CONFIG},--nt-fw-config,${FVP_NT_FW_CONFIG}))
- ifeq (${SPD},spmd)
- ifeq ($(ARM_SPMC_MANIFEST_DTS),)
- ARM_SPMC_MANIFEST_DTS := ${TC_BASE}/fdts/${PLAT}_spmc_test_manifest.dts
- endif
- FDT_SOURCES += ${ARM_SPMC_MANIFEST_DTS}
- TC_TOS_FW_CONFIG := ${BUILD_PLAT}/fdts/$(notdir $(basename ${ARM_SPMC_MANIFEST_DTS})).dtb
- # Add the TOS_FW_CONFIG to FIP and specify the same to certtool
- $(eval $(call TOOL_ADD_PAYLOAD,${TC_TOS_FW_CONFIG},--tos-fw-config,${TC_TOS_FW_CONFIG}))
- endif
- #Device tree
- TC_HW_CONFIG_DTS := fdts/${PLAT}${TARGET_PLATFORM}.dts
- TC_HW_CONFIG := ${BUILD_PLAT}/fdts/${PLAT}.dtb
- FDT_SOURCES += ${TC_HW_CONFIG_DTS}
- $(eval TC_HW_CONFIG := ${BUILD_PLAT}/$(patsubst %.dts,%.dtb,$(TC_HW_CONFIG_DTS)))
- # Add the HW_CONFIG to FIP and specify the same to certtool
- $(eval $(call TOOL_ADD_PAYLOAD,${TC_HW_CONFIG},--hw-config,${TC_HW_CONFIG}))
- # Include Measured Boot makefile before any Crypto library makefile.
- # Crypto library makefile may need default definitions of Measured Boot build
- # flags present in Measured Boot makefile.
- $(info Including rse_comms.mk)
- ifeq (${MEASURED_BOOT},1)
- $(info Including rse_comms.mk)
- include drivers/arm/rse/rse_comms.mk
- BL1_SOURCES += ${RSE_COMMS_SOURCES}
- BL2_SOURCES += ${RSE_COMMS_SOURCES}
- PLAT_INCLUDES += -Iinclude/lib/psa
- ifeq (${DICE_PROTECTION_ENVIRONMENT},1)
- $(info Including qcbor.mk)
- include drivers/measured_boot/rse/qcbor.mk
- $(info Including dice_prot_env.mk)
- include drivers/measured_boot/rse/dice_prot_env.mk
- BL1_SOURCES += ${QCBOR_SOURCES} \
- ${DPE_SOURCES} \
- plat/arm/board/tc/tc_common_dpe.c \
- plat/arm/board/tc/tc_bl1_dpe.c \
- lib/psa/dice_protection_environment.c \
- drivers/arm/css/sds/sds.c \
- drivers/delay_timer/delay_timer.c \
- drivers/delay_timer/generic_delay_timer.c
- BL2_SOURCES += ${QCBOR_SOURCES} \
- ${DPE_SOURCES} \
- plat/arm/board/tc/tc_common_dpe.c \
- plat/arm/board/tc/tc_bl2_dpe.c \
- lib/psa/dice_protection_environment.c
- PLAT_INCLUDES += -I${QCBOR_INCLUDES} \
- -Iinclude/lib/dice
- else
- $(info Including rse_measured_boot.mk)
- include drivers/measured_boot/rse/rse_measured_boot.mk
- BL1_SOURCES += ${MEASURED_BOOT_SOURCES} \
- plat/arm/board/tc/tc_common_measured_boot.c \
- plat/arm/board/tc/tc_bl1_measured_boot.c \
- lib/psa/measured_boot.c
- BL2_SOURCES += ${MEASURED_BOOT_SOURCES} \
- plat/arm/board/tc/tc_common_measured_boot.c \
- plat/arm/board/tc/tc_bl2_measured_boot.c \
- lib/psa/measured_boot.c
- endif
- endif
- ifeq (${TRNG_SUPPORT},1)
- BL31_SOURCES += plat/arm/board/tc/tc_trng.c
- endif
- ifneq (${PLATFORM_TEST},)
- # Add this include as first, before arm_common.mk. This is necessary
- # because arm_common.mk builds Mbed TLS, and platform_test.mk can
- # change the list of Mbed TLS files that are to be compiled
- # (LIBMBEDTLS_SRCS).
- include plat/arm/board/tc/platform_test.mk
- endif
- include plat/arm/common/arm_common.mk
- include plat/arm/css/common/css_common.mk
- include plat/arm/board/common/board_common.mk
|