12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788899091 |
- /*
- * Copyright (C) 2018 Marvell International Ltd.
- *
- * SPDX-License-Identifier: BSD-3-Clause
- * https://spdx.org/licenses
- */
- #include <arch_helpers.h>
- #include <common/debug.h>
- #include <mv_ddr_if.h>
- #include <plat_marvell.h>
- /*
- * This function may modify the default DRAM parameters
- * based on information received from SPD or bootloader
- * configuration located on non volatile storage
- */
- void plat_marvell_dram_update_topology(void)
- {
- }
- /*
- * This struct provides the DRAM training code with
- * the appropriate board DRAM configuration
- */
- static struct mv_ddr_topology_map board_topology_map = {
- /* FIXME: MISL board 2CS 8Gb x8 devices of micron - 2133P */
- DEBUG_LEVEL_ERROR,
- 0x1, /* active interfaces */
- /* cs_mask, mirror, dqs_swap, ck_swap X subphys */
- { { { {0x3, 0x2, 0, 0},
- {0x3, 0x2, 0, 0},
- {0x3, 0x2, 0, 0},
- {0x3, 0x2, 0, 0},
- {0x3, 0x2, 0, 0},
- {0x3, 0x2, 0, 0},
- {0x3, 0x2, 0, 0},
- {0x3, 0x2, 0, 0},
- {0x3, 0x2, 0, 0} },
- SPEED_BIN_DDR_2400T, /* speed_bin */
- MV_DDR_DEV_WIDTH_8BIT, /* sdram device width */
- MV_DDR_DIE_CAP_8GBIT, /* die capacity */
- MV_DDR_FREQ_SAR, /* frequency */
- 0, 0, /* cas_l, cas_wl */
- MV_DDR_TEMP_LOW} }, /* temperature */
- MV_DDR_32BIT_ECC_PUP8_BUS_MASK, /* subphys mask */
- MV_DDR_CFG_DEFAULT, /* ddr configuration data source */
- NOT_COMBINED, /* ddr twin-die combined*/
- { {0} }, /* raw spd data */
- {0}, /* timing parameters */
- { /* electrical configuration */
- { /* memory electrical configuration */
- MV_DDR_RTT_NOM_PARK_RZQ_DISABLE, /* rtt_nom */
- {
- MV_DDR_RTT_NOM_PARK_RZQ_DIV4, /* rtt_park 1cs */
- MV_DDR_RTT_NOM_PARK_RZQ_DIV1 /* rtt_park 2cs */
- },
- {
- MV_DDR_RTT_WR_DYN_ODT_OFF, /* rtt_wr 1cs */
- MV_DDR_RTT_WR_RZQ_DIV2 /* rtt_wr 2cs */
- },
- MV_DDR_DIC_RZQ_DIV7 /* dic */
- },
- { /* phy electrical configuration */
- MV_DDR_OHM_30, /* data_drv_p */
- MV_DDR_OHM_30, /* data_drv_n */
- MV_DDR_OHM_30, /* ctrl_drv_p */
- MV_DDR_OHM_30, /* ctrl_drv_n */
- {
- MV_DDR_OHM_60, /* odt_p 1cs */
- MV_DDR_OHM_120 /* odt_p 2cs */
- },
- {
- MV_DDR_OHM_60, /* odt_n 1cs */
- MV_DDR_OHM_120 /* odt_n 2cs */
- },
- },
- { /* mac electrical configuration */
- MV_DDR_ODT_CFG_NORMAL, /* odtcfg_pattern */
- MV_DDR_ODT_CFG_ALWAYS_ON, /* odtcfg_write */
- MV_DDR_ODT_CFG_NORMAL, /* odtcfg_read */
- },
- }
- };
- struct mv_ddr_topology_map *mv_ddr_topology_map_get(void)
- {
- /* Return the board topology as defined in the board code */
- return &board_topology_map;
- }
|