123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251 |
- /* vi: set sw=4 ts=4: */
- /*
- * Mini ar implementation for busybox
- *
- * Copyright (C) 2000 by Glenn McGrath
- *
- * Based in part on BusyBox tar, Debian dpkg-deb and GNU ar.
- *
- * Licensed under GPLv2 or later, see file LICENSE in this source tree.
- *
- * Archive creation support:
- * Copyright (C) 2010 Nokia Corporation. All rights reserved.
- * Written by Alexander Shishkin.
- *
- * There is no single standard to adhere to so ar may not portable
- * between different systems
- * http://www.unix-systems.org/single_unix_specification_v2/xcu/ar.html
- */
- #include "libbb.h"
- #include "archive.h"
- #include "ar.h"
- #if ENABLE_FEATURE_AR_CREATE
- /* filter out entries with same names as specified on the command line */
- static char FAST_FUNC filter_replaceable(archive_handle_t *handle)
- {
- if (find_list_entry(handle->accept, handle->file_header->name))
- return EXIT_FAILURE;
- return EXIT_SUCCESS;
- }
- static void output_ar_header(archive_handle_t *handle)
- {
- /* GNU ar 2.19.51.0.14 creates malformed archives
- * if input files are >10G. It also truncates files >4GB
- * (uses "size mod 4G"). We abort in this case:
- * We could add support for up to 10G files, but this is unlikely to be useful.
- * Note that unpacking side limits all fields to "unsigned int" data type,
- * and treats "all ones" as an error indicator. Thus max we allow here is UINT_MAX-1.
- */
- enum {
- /* for 2nd field: mtime */
- MAX11CHARS = UINT_MAX > 0xffffffff ? (unsigned)99999999999 : UINT_MAX-1,
- /* for last field: filesize */
- MAX10CHARS = UINT_MAX > 0xffffffff ? (unsigned)9999999999 : UINT_MAX-1,
- };
- struct file_header_t *fh = handle->file_header;
- if (handle->offset & 1) {
- xwrite(handle->src_fd, "\n", 1);
- handle->offset++;
- }
- /* Careful! The widths should be exact. Fields must be separated */
- if (sizeof(off_t) > 4 && fh->size > (off_t)MAX10CHARS) {
- bb_error_msg_and_die("'%s' is bigger than ar can handle", fh->name);
- }
- fdprintf(handle->src_fd, "%-16.16s%-12lu%-6u%-6u%-8o%-10"OFF_FMT"u`\n",
- fh->name,
- (sizeof(time_t) > 4 && fh->mtime > MAX11CHARS) ? (long)0 : (long)fh->mtime,
- fh->uid > 99999 ? 0 : (int)fh->uid,
- fh->gid > 99999 ? 0 : (int)fh->gid,
- (int)fh->mode & 07777777,
- fh->size
- );
- handle->offset += AR_HEADER_LEN;
- }
- /*
- * when replacing files in an existing archive, copy from the the
- * original archive those files that are to be left intact
- */
- static void FAST_FUNC copy_data(archive_handle_t *handle)
- {
- archive_handle_t *out_handle = handle->ar__out;
- struct file_header_t *fh = handle->file_header;
- out_handle->file_header = fh;
- output_ar_header(out_handle);
- bb_copyfd_exact_size(handle->src_fd, out_handle->src_fd, fh->size);
- out_handle->offset += fh->size;
- }
- static int write_ar_header(archive_handle_t *handle)
- {
- char *fn;
- char fn_h[17]; /* 15 + "/" + NUL */
- struct stat st;
- int fd;
- fn = llist_pop(&handle->accept);
- if (!fn)
- return -1;
- xstat(fn, &st);
- handle->file_header->mtime = st.st_mtime;
- handle->file_header->uid = st.st_uid;
- handle->file_header->gid = st.st_gid;
- handle->file_header->mode = st.st_mode;
- handle->file_header->size = st.st_size;
- handle->file_header->name = fn_h;
- //TODO: if ENABLE_FEATURE_AR_LONG_FILENAMES...
- sprintf(fn_h, "%.15s/", bb_basename(fn));
- output_ar_header(handle);
- fd = xopen(fn, O_RDONLY);
- bb_copyfd_exact_size(fd, handle->src_fd, st.st_size);
- close(fd);
- handle->offset += st.st_size;
- return 0;
- }
- static int write_ar_archive(archive_handle_t *handle)
- {
- struct stat st;
- archive_handle_t *out_handle;
- xfstat(handle->src_fd, &st, handle->ar__name);
- /* if archive exists, create a new handle for output.
- * we create it in place of the old one.
- */
- if (st.st_size != 0) {
- out_handle = init_handle();
- xunlink(handle->ar__name);
- out_handle->src_fd = xopen(handle->ar__name, O_WRONLY | O_CREAT | O_TRUNC);
- out_handle->accept = handle->accept;
- } else {
- out_handle = handle;
- }
- handle->ar__out = out_handle;
- xwrite(out_handle->src_fd, AR_MAGIC "\n", AR_MAGIC_LEN + 1);
- out_handle->offset += AR_MAGIC_LEN + 1;
- /* skip to the end of the archive if we have to append stuff */
- if (st.st_size != 0) {
- handle->filter = filter_replaceable;
- handle->action_data = copy_data;
- unpack_ar_archive(handle);
- }
- while (write_ar_header(out_handle) == 0)
- continue;
- /* optional, since we exit right after we return */
- if (ENABLE_FEATURE_CLEAN_UP) {
- close(handle->src_fd);
- if (out_handle->src_fd != handle->src_fd)
- close(out_handle->src_fd);
- }
- return EXIT_SUCCESS;
- }
- #endif /* FEATURE_AR_CREATE */
- static void FAST_FUNC header_verbose_list_ar(const file_header_t *file_header)
- {
- const char *mode = bb_mode_string(file_header->mode);
- char *mtime;
- mtime = ctime(&file_header->mtime);
- mtime[16] = ' ';
- memmove(&mtime[17], &mtime[20], 4);
- mtime[21] = '\0';
- printf("%s %u/%u%7"OFF_FMT"u %s %s\n", &mode[1],
- (int)file_header->uid, (int)file_header->gid,
- file_header->size,
- &mtime[4], file_header->name
- );
- }
- #define AR_OPT_VERBOSE (1 << 0)
- #define AR_OPT_PRESERVE_DATE (1 << 1)
- /* "ar r" implies create, but warns about it. c suppresses warning.
- * bbox accepts but ignores it: */
- #define AR_OPT_CREATE (1 << 2)
- #define AR_CMD_PRINT (1 << 3)
- #define FIRST_CMD AR_CMD_PRINT
- #define AR_CMD_LIST (1 << 4)
- #define AR_CMD_EXTRACT (1 << 5)
- #define AR_CMD_INSERT (1 << 6)
- int ar_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
- int ar_main(int argc UNUSED_PARAM, char **argv)
- {
- archive_handle_t *archive_handle;
- unsigned opt, t;
- archive_handle = init_handle();
- /* --: prepend '-' to the first argument if required */
- /* -1: at least one param is reqd */
- /* one of p,t,x[,r] is required */
- opt_complementary = "--:-1:p:t:x"IF_FEATURE_AR_CREATE(":r");
- opt = getopt32(argv, "voc""ptx"IF_FEATURE_AR_CREATE("r"));
- argv += optind;
- t = opt / FIRST_CMD;
- if (t & (t-1)) /* more than one of p,t,x[,r] are specified */
- bb_show_usage();
- if (opt & AR_CMD_PRINT) {
- archive_handle->action_data = data_extract_to_stdout;
- }
- if (opt & AR_CMD_LIST) {
- archive_handle->action_header = header_list;
- }
- if (opt & AR_CMD_EXTRACT) {
- archive_handle->action_data = data_extract_all;
- }
- if (opt & AR_OPT_PRESERVE_DATE) {
- archive_handle->ah_flags |= ARCHIVE_RESTORE_DATE;
- }
- if (opt & AR_OPT_VERBOSE) {
- archive_handle->action_header = header_verbose_list_ar;
- }
- #if ENABLE_FEATURE_AR_CREATE
- archive_handle->ar__name = *argv;
- #endif
- archive_handle->src_fd = xopen(*argv++,
- (opt & AR_CMD_INSERT)
- ? O_RDWR | O_CREAT
- : O_RDONLY
- );
- if (*argv)
- archive_handle->filter = filter_accept_list;
- while (*argv) {
- llist_add_to_end(&archive_handle->accept, *argv++);
- }
- #if ENABLE_FEATURE_AR_CREATE
- if (opt & AR_CMD_INSERT)
- return write_ar_archive(archive_handle);
- #endif
- unpack_ar_archive(archive_handle);
- return EXIT_SUCCESS;
- }
|