123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852 |
- /* vi: set sw=4 ts=4: */
- /*
- * Mini ps implementation(s) for busybox
- *
- * Copyright (C) 1999-2004 by Erik Andersen <andersen@codepoet.org>
- * Fix for SELinux Support:(c)2007 Hiroshi Shinji <shiroshi@my.email.ne.jp>
- * (c)2007 Yuichi Nakamura <ynakam@hitachisoft.jp>
- *
- * Licensed under GPLv2, see file LICENSE in this source tree.
- */
- //config:config PS
- //config: bool "ps"
- //config: default y
- //config: help
- //config: ps gives a snapshot of the current processes.
- //config:
- //config:config FEATURE_PS_WIDE
- //config: bool "Enable wide output option (-w)"
- //config: default y
- //config: depends on PS && !DESKTOP
- //config: help
- //config: Support argument 'w' for wide output.
- //config: If given once, 132 chars are printed, and if given more
- //config: than once, the length is unlimited.
- //config:
- //config:config FEATURE_PS_LONG
- //config: bool "Enable long output option (-l)"
- //config: default y
- //config: depends on PS && !DESKTOP
- //config: help
- //config: Support argument 'l' for long output.
- //config: Adds fields PPID, RSS, START, TIME & TTY
- //config:
- //config:config FEATURE_PS_TIME
- //config: bool "Support -o time and -o etime output specifiers"
- //config: default y
- //config: depends on PS && DESKTOP
- //config: select PLATFORM_LINUX
- //config:
- //config:config FEATURE_PS_UNUSUAL_SYSTEMS
- //config: bool "Support Linux prior to 2.4.0 and non-ELF systems"
- //config: default n
- //config: depends on FEATURE_PS_TIME
- //config: help
- //config: Include support for measuring HZ on old kernels and non-ELF systems
- //config: (if you are on Linux 2.4.0+ and use ELF, you don't need this)
- //config:
- //config:config FEATURE_PS_ADDITIONAL_COLUMNS
- //config: bool "Support -o rgroup, -o ruser, -o nice specifiers"
- //config: default y
- //config: depends on PS && DESKTOP
- //applet:IF_PS(APPLET(ps, BB_DIR_BIN, BB_SUID_DROP))
- //kbuild:lib-$(CONFIG_PS) += ps.o
- //usage:#if ENABLE_DESKTOP
- //usage:
- //usage:#define ps_trivial_usage
- //usage: "[-o COL1,COL2=HEADER]" IF_FEATURE_SHOW_THREADS(" [-T]")
- //usage:#define ps_full_usage "\n\n"
- //usage: "Show list of processes\n"
- //usage: "\n -o COL1,COL2=HEADER Select columns for display"
- //usage: IF_FEATURE_SHOW_THREADS(
- //usage: "\n -T Show threads"
- //usage: )
- //usage:
- //usage:#else /* !ENABLE_DESKTOP */
- //usage:
- //usage:#if !ENABLE_SELINUX && !ENABLE_FEATURE_PS_WIDE
- //usage:#define USAGE_PS "\nThis version of ps accepts no options"
- //usage:#else
- //usage:#define USAGE_PS ""
- //usage:#endif
- //usage:
- //usage:#define ps_trivial_usage
- //usage: ""
- //usage:#define ps_full_usage "\n\n"
- //usage: "Show list of processes\n"
- //usage: USAGE_PS
- //usage: IF_SELINUX(
- //usage: "\n -Z Show selinux context"
- //usage: )
- //usage: IF_FEATURE_PS_WIDE(
- //usage: "\n w Wide output"
- //usage: )
- //usage: IF_FEATURE_PS_LONG(
- //usage: "\n l Long output"
- //usage: )
- //usage: IF_FEATURE_SHOW_THREADS(
- //usage: "\n T Show threads"
- //usage: )
- //usage:
- //usage:#endif /* ENABLE_DESKTOP */
- //usage:
- //usage:#define ps_example_usage
- //usage: "$ ps\n"
- //usage: " PID Uid Gid State Command\n"
- //usage: " 1 root root S init\n"
- //usage: " 2 root root S [kflushd]\n"
- //usage: " 3 root root S [kupdate]\n"
- //usage: " 4 root root S [kpiod]\n"
- //usage: " 5 root root S [kswapd]\n"
- //usage: " 742 andersen andersen S [bash]\n"
- //usage: " 743 andersen andersen S -bash\n"
- //usage: " 745 root root S [getty]\n"
- //usage: " 2990 andersen andersen R ps\n"
- #include "libbb.h"
- #include "common_bufsiz.h"
- #ifdef __linux__
- # include <sys/sysinfo.h>
- #endif
- /* Absolute maximum on output line length */
- enum { MAX_WIDTH = 2*1024 };
- #if ENABLE_FEATURE_PS_TIME || ENABLE_FEATURE_PS_LONG
- static unsigned long get_uptime(void)
- {
- #ifdef __linux__
- struct sysinfo info;
- if (sysinfo(&info) < 0)
- return 0;
- return info.uptime;
- #elif 1
- unsigned long uptime;
- char buf[sizeof(uptime)*3 + 2];
- /* /proc/uptime is "UPTIME_SEC.NN IDLE_SEC.NN\n"
- * (where IDLE is cumulative over all CPUs)
- */
- if (open_read_close("/proc/uptime", buf, sizeof(buf)) <= 0)
- bb_perror_msg_and_die("can't read '%s'", "/proc/uptime");
- buf[sizeof(buf)-1] = '\0';
- sscanf(buf, "%lu", &uptime);
- return uptime;
- #else
- struct timespec ts;
- if (clock_gettime(CLOCK_MONOTONIC, &ts) < 0)
- return 0;
- return ts.tv_sec;
- #endif
- }
- #endif
- #if ENABLE_DESKTOP
- #include <sys/times.h> /* for times() */
- #ifndef AT_CLKTCK
- # define AT_CLKTCK 17
- #endif
- /* TODO:
- * http://pubs.opengroup.org/onlinepubs/9699919799/utilities/ps.html
- * specifies (for XSI-conformant systems) following default columns
- * (l and f mark columns shown with -l and -f respectively):
- * F l Flags (octal and additive) associated with the process (??)
- * S l The state of the process
- * UID f,l The user ID; the login name is printed with -f
- * PID The process ID
- * PPID f,l The parent process
- * C f,l Processor utilization
- * PRI l The priority of the process; higher numbers mean lower priority
- * NI l Nice value
- * ADDR l The address of the process
- * SZ l The size in blocks of the core image of the process
- * WCHAN l The event for which the process is waiting or sleeping
- * STIME f Starting time of the process
- * TTY The controlling terminal for the process
- * TIME The cumulative execution time for the process
- * CMD The command name; the full command line is shown with -f
- */
- typedef struct {
- uint16_t width;
- char name6[6];
- const char *header;
- void (*f)(char *buf, int size, const procps_status_t *ps);
- int ps_flags;
- } ps_out_t;
- struct globals {
- ps_out_t* out;
- int out_cnt;
- int print_header;
- int need_flags;
- char *buffer;
- unsigned terminal_width;
- #if ENABLE_FEATURE_PS_TIME
- unsigned kernel_HZ;
- unsigned long seconds_since_boot;
- #endif
- } FIX_ALIASING;
- #define G (*(struct globals*)bb_common_bufsiz1)
- #define out (G.out )
- #define out_cnt (G.out_cnt )
- #define print_header (G.print_header )
- #define need_flags (G.need_flags )
- #define buffer (G.buffer )
- #define terminal_width (G.terminal_width )
- #define kernel_HZ (G.kernel_HZ )
- #define INIT_G() do { setup_common_bufsiz(); } while (0)
- #if ENABLE_FEATURE_PS_TIME
- /* for ELF executables, notes are pushed before environment and args */
- static uintptr_t find_elf_note(uintptr_t findme)
- {
- uintptr_t *ep = (uintptr_t *) environ;
- while (*ep++)
- continue;
- while (*ep) {
- if (ep[0] == findme) {
- return ep[1];
- }
- ep += 2;
- }
- return -1;
- }
- #if ENABLE_FEATURE_PS_UNUSUAL_SYSTEMS
- static unsigned get_HZ_by_waiting(void)
- {
- struct timeval tv1, tv2;
- unsigned t1, t2, r, hz;
- unsigned cnt = cnt; /* for compiler */
- int diff;
- r = 0;
- /* Wait for times() to reach new tick */
- t1 = times(NULL);
- do {
- t2 = times(NULL);
- } while (t2 == t1);
- gettimeofday(&tv2, NULL);
- do {
- t1 = t2;
- tv1.tv_usec = tv2.tv_usec;
- /* Wait exactly one times() tick */
- do {
- t2 = times(NULL);
- } while (t2 == t1);
- gettimeofday(&tv2, NULL);
- /* Calculate ticks per sec, rounding up to even */
- diff = tv2.tv_usec - tv1.tv_usec;
- if (diff <= 0) diff += 1000000;
- hz = 1000000u / (unsigned)diff;
- hz = (hz+1) & ~1;
- /* Count how many same hz values we saw */
- if (r != hz) {
- r = hz;
- cnt = 0;
- }
- cnt++;
- } while (cnt < 3); /* exit if saw 3 same values */
- return r;
- }
- #else
- static inline unsigned get_HZ_by_waiting(void)
- {
- /* Better method? */
- return 100;
- }
- #endif
- static unsigned get_kernel_HZ(void)
- {
- if (kernel_HZ)
- return kernel_HZ;
- /* Works for ELF only, Linux 2.4.0+ */
- kernel_HZ = find_elf_note(AT_CLKTCK);
- if (kernel_HZ == (unsigned)-1)
- kernel_HZ = get_HZ_by_waiting();
- G.seconds_since_boot = get_uptime();
- return kernel_HZ;
- }
- #endif
- /* Print value to buf, max size+1 chars (including trailing '\0') */
- static void func_user(char *buf, int size, const procps_status_t *ps)
- {
- #if 1
- safe_strncpy(buf, get_cached_username(ps->uid), size+1);
- #else
- /* "compatible" version, but it's larger */
- /* procps 2.18 shows numeric UID if name overflows the field */
- /* TODO: get_cached_username() returns numeric string if
- * user has no passwd record, we will display it
- * left-justified here; too long usernames are shown
- * as _right-justified_ IDs. Is it worth fixing? */
- const char *user = get_cached_username(ps->uid);
- if (strlen(user) <= size)
- safe_strncpy(buf, user, size+1);
- else
- sprintf(buf, "%*u", size, (unsigned)ps->uid);
- #endif
- }
- static void func_group(char *buf, int size, const procps_status_t *ps)
- {
- safe_strncpy(buf, get_cached_groupname(ps->gid), size+1);
- }
- static void func_comm(char *buf, int size, const procps_status_t *ps)
- {
- safe_strncpy(buf, ps->comm, size+1);
- }
- static void func_state(char *buf, int size, const procps_status_t *ps)
- {
- safe_strncpy(buf, ps->state, size+1);
- }
- static void func_args(char *buf, int size, const procps_status_t *ps)
- {
- read_cmdline(buf, size+1, ps->pid, ps->comm);
- }
- static void func_pid(char *buf, int size, const procps_status_t *ps)
- {
- sprintf(buf, "%*u", size, ps->pid);
- }
- static void func_ppid(char *buf, int size, const procps_status_t *ps)
- {
- sprintf(buf, "%*u", size, ps->ppid);
- }
- static void func_pgid(char *buf, int size, const procps_status_t *ps)
- {
- sprintf(buf, "%*u", size, ps->pgid);
- }
- static void put_lu(char *buf, int size, unsigned long u)
- {
- char buf4[5];
- /* see http://en.wikipedia.org/wiki/Tera */
- smart_ulltoa4(u, buf4, " mgtpezy")[0] = '\0';
- sprintf(buf, "%.*s", size, buf4);
- }
- static void func_vsz(char *buf, int size, const procps_status_t *ps)
- {
- put_lu(buf, size, ps->vsz);
- }
- static void func_rss(char *buf, int size, const procps_status_t *ps)
- {
- put_lu(buf, size, ps->rss);
- }
- static void func_tty(char *buf, int size, const procps_status_t *ps)
- {
- buf[0] = '?';
- buf[1] = '\0';
- if (ps->tty_major) /* tty field of "0" means "no tty" */
- snprintf(buf, size+1, "%u,%u", ps->tty_major, ps->tty_minor);
- }
- #if ENABLE_FEATURE_PS_ADDITIONAL_COLUMNS
- static void func_rgroup(char *buf, int size, const procps_status_t *ps)
- {
- safe_strncpy(buf, get_cached_groupname(ps->rgid), size+1);
- }
- static void func_ruser(char *buf, int size, const procps_status_t *ps)
- {
- safe_strncpy(buf, get_cached_username(ps->ruid), size+1);
- }
- static void func_nice(char *buf, int size, const procps_status_t *ps)
- {
- sprintf(buf, "%*d", size, ps->niceness);
- }
- #endif
- #if ENABLE_FEATURE_PS_TIME
- static void func_etime(char *buf, int size, const procps_status_t *ps)
- {
- /* elapsed time [[dd-]hh:]mm:ss; here only mm:ss */
- unsigned long mm;
- unsigned ss;
- mm = ps->start_time / get_kernel_HZ();
- /* must be after get_kernel_HZ()! */
- mm = G.seconds_since_boot - mm;
- ss = mm % 60;
- mm /= 60;
- snprintf(buf, size+1, "%3lu:%02u", mm, ss);
- }
- static void func_time(char *buf, int size, const procps_status_t *ps)
- {
- /* cumulative time [[dd-]hh:]mm:ss; here only mm:ss */
- unsigned long mm;
- unsigned ss;
- mm = (ps->utime + ps->stime) / get_kernel_HZ();
- ss = mm % 60;
- mm /= 60;
- snprintf(buf, size+1, "%3lu:%02u", mm, ss);
- }
- #endif
- #if ENABLE_SELINUX
- static void func_label(char *buf, int size, const procps_status_t *ps)
- {
- safe_strncpy(buf, ps->context ? ps->context : "unknown", size+1);
- }
- #endif
- /*
- static void func_nice(char *buf, int size, const procps_status_t *ps)
- {
- ps->???
- }
- static void func_pcpu(char *buf, int size, const procps_status_t *ps)
- {
- }
- */
- static const ps_out_t out_spec[] = {
- /* Mandated by http://pubs.opengroup.org/onlinepubs/9699919799/utilities/ps.html: */
- { 8 , "user" ,"USER" ,func_user ,PSSCAN_UIDGID },
- { 8 , "group" ,"GROUP" ,func_group ,PSSCAN_UIDGID },
- { 16 , "comm" ,"COMMAND",func_comm ,PSSCAN_COMM },
- { MAX_WIDTH , "args" ,"COMMAND",func_args ,PSSCAN_COMM },
- { 5 , "pid" ,"PID" ,func_pid ,PSSCAN_PID },
- { 5 , "ppid" ,"PPID" ,func_ppid ,PSSCAN_PPID },
- { 5 , "pgid" ,"PGID" ,func_pgid ,PSSCAN_PGID },
- #if ENABLE_FEATURE_PS_TIME
- { sizeof("ELAPSED")-1, "etime" ,"ELAPSED",func_etime ,PSSCAN_START_TIME },
- #endif
- #if ENABLE_FEATURE_PS_ADDITIONAL_COLUMNS
- { 5 , "nice" ,"NI" ,func_nice ,PSSCAN_NICE },
- { 8 , "rgroup","RGROUP" ,func_rgroup,PSSCAN_RUIDGID },
- { 8 , "ruser" ,"RUSER" ,func_ruser ,PSSCAN_RUIDGID },
- // { 5 , "pcpu" ,"%CPU" ,func_pcpu ,PSSCAN_ },
- #endif
- #if ENABLE_FEATURE_PS_TIME
- { 6 , "time" ,"TIME" ,func_time ,PSSCAN_STIME | PSSCAN_UTIME },
- #endif
- { 6 , "tty" ,"TT" ,func_tty ,PSSCAN_TTY },
- { 4 , "vsz" ,"VSZ" ,func_vsz ,PSSCAN_VSZ },
- /* Not mandated, but useful: */
- { 4 , "stat" ,"STAT" ,func_state ,PSSCAN_STATE },
- { 4 , "rss" ,"RSS" ,func_rss ,PSSCAN_RSS },
- #if ENABLE_SELINUX
- { 35 , "label" ,"LABEL" ,func_label ,PSSCAN_CONTEXT },
- #endif
- };
- static ps_out_t* new_out_t(void)
- {
- out = xrealloc_vector(out, 2, out_cnt);
- return &out[out_cnt++];
- }
- static const ps_out_t* find_out_spec(const char *name)
- {
- unsigned i;
- char buf[ARRAY_SIZE(out_spec)*7 + 1];
- char *p = buf;
- for (i = 0; i < ARRAY_SIZE(out_spec); i++) {
- if (strncmp(name, out_spec[i].name6, 6) == 0)
- return &out_spec[i];
- p += sprintf(p, "%.6s,", out_spec[i].name6);
- }
- p[-1] = '\0';
- bb_error_msg_and_die("bad -o argument '%s', supported arguments: %s", name, buf);
- }
- static void parse_o(char* opt)
- {
- ps_out_t* new;
- // POSIX: "-o is blank- or comma-separated list" (FIXME)
- char *comma, *equal;
- while (1) {
- comma = strchr(opt, ',');
- equal = strchr(opt, '=');
- if (comma && (!equal || equal > comma)) {
- *comma = '\0';
- *new_out_t() = *find_out_spec(opt);
- *comma = ',';
- opt = comma + 1;
- continue;
- }
- break;
- }
- // opt points to last spec in comma separated list.
- // This one can have =HEADER part.
- new = new_out_t();
- if (equal)
- *equal = '\0';
- *new = *find_out_spec(opt);
- if (equal) {
- *equal = '=';
- new->header = equal + 1;
- // POSIX: the field widths shall be ... at least as wide as
- // the header text (default or overridden value).
- // If the header text is null, such as -o user=,
- // the field width shall be at least as wide as the
- // default header text
- if (new->header[0]) {
- new->width = strlen(new->header);
- print_header = 1;
- }
- } else
- print_header = 1;
- }
- static void alloc_line_buffer(void)
- {
- int i;
- int width = 0;
- for (i = 0; i < out_cnt; i++) {
- need_flags |= out[i].ps_flags;
- if (out[i].header[0]) {
- print_header = 1;
- }
- width += out[i].width + 1; /* "FIELD " */
- if ((int)(width - terminal_width) > 0) {
- /* The rest does not fit on the screen */
- //out[i].width -= (width - terminal_width - 1);
- out_cnt = i + 1;
- break;
- }
- }
- #if ENABLE_SELINUX
- if (!is_selinux_enabled())
- need_flags &= ~PSSCAN_CONTEXT;
- #endif
- buffer = xmalloc(width + 1); /* for trailing \0 */
- }
- static void format_header(void)
- {
- int i;
- ps_out_t* op;
- char *p;
- if (!print_header)
- return;
- p = buffer;
- i = 0;
- if (out_cnt) {
- while (1) {
- op = &out[i];
- if (++i == out_cnt) /* do not pad last field */
- break;
- p += sprintf(p, "%-*s ", op->width, op->header);
- }
- strcpy(p, op->header);
- }
- printf("%.*s\n", terminal_width, buffer);
- }
- static void format_process(const procps_status_t *ps)
- {
- int i, len;
- char *p = buffer;
- i = 0;
- if (out_cnt) while (1) {
- out[i].f(p, out[i].width, ps);
- // POSIX: Any field need not be meaningful in all
- // implementations. In such a case a hyphen ( '-' )
- // should be output in place of the field value.
- if (!p[0]) {
- p[0] = '-';
- p[1] = '\0';
- }
- len = strlen(p);
- p += len;
- len = out[i].width - len + 1;
- if (++i == out_cnt) /* do not pad last field */
- break;
- p += sprintf(p, "%*s", len, "");
- }
- printf("%.*s\n", terminal_width, buffer);
- }
- #if ENABLE_SELINUX
- # define SELINUX_O_PREFIX "label,"
- # define DEFAULT_O_STR (SELINUX_O_PREFIX "pid,user" IF_FEATURE_PS_TIME(",time") ",args")
- #else
- # define DEFAULT_O_STR ("pid,user" IF_FEATURE_PS_TIME(",time") ",args")
- #endif
- int ps_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
- int ps_main(int argc UNUSED_PARAM, char **argv)
- {
- procps_status_t *p;
- llist_t* opt_o = NULL;
- char default_o[sizeof(DEFAULT_O_STR)];
- #if ENABLE_SELINUX || ENABLE_FEATURE_SHOW_THREADS
- int opt;
- #endif
- enum {
- OPT_Z = (1 << 0),
- OPT_o = (1 << 1),
- OPT_a = (1 << 2),
- OPT_A = (1 << 3),
- OPT_d = (1 << 4),
- OPT_e = (1 << 5),
- OPT_f = (1 << 6),
- OPT_l = (1 << 7),
- OPT_T = (1 << 8) * ENABLE_FEATURE_SHOW_THREADS,
- };
- INIT_G();
- // POSIX:
- // -a Write information for all processes associated with terminals
- // Implementations may omit session leaders from this list
- // -A Write information for all processes
- // -d Write information for all processes, except session leaders
- // -e Write information for all processes (equivalent to -A)
- // -f Generate a full listing
- // -l Generate a long listing
- // -o col1,col2,col3=header
- // Select which columns to display
- /* We allow (and ignore) most of the above. FIXME.
- * -T is picked for threads (POSIX hasn't standardized it).
- * procps v3.2.7 supports -T and shows tids as SPID column,
- * it also supports -L where it shows tids as LWP column.
- */
- #if ENABLE_SELINUX || ENABLE_FEATURE_SHOW_THREADS
- opt =
- #endif
- getopt32(argv, "Zo:*aAdefl"IF_FEATURE_SHOW_THREADS("T"), &opt_o);
- if (opt_o) {
- do {
- parse_o(llist_pop(&opt_o));
- } while (opt_o);
- } else {
- /* Below: parse_o() needs char*, NOT const char*,
- * can't pass it constant string. Need to make a copy first.
- */
- #if ENABLE_SELINUX
- if (!(opt & OPT_Z) || !is_selinux_enabled()) {
- /* no -Z or no SELinux: do not show LABEL */
- strcpy(default_o, DEFAULT_O_STR + sizeof(SELINUX_O_PREFIX)-1);
- } else
- #endif
- {
- strcpy(default_o, DEFAULT_O_STR);
- }
- parse_o(default_o);
- }
- #if ENABLE_FEATURE_SHOW_THREADS
- if (opt & OPT_T)
- need_flags |= PSSCAN_TASKS;
- #endif
- /* Was INT_MAX, but some libc's go belly up with printf("%.*s")
- * and such large widths */
- terminal_width = MAX_WIDTH;
- if (isatty(1)) {
- terminal_width = get_terminal_width(0);
- if (--terminal_width > MAX_WIDTH)
- terminal_width = MAX_WIDTH;
- }
- alloc_line_buffer();
- format_header();
- p = NULL;
- while ((p = procps_scan(p, need_flags)) != NULL) {
- format_process(p);
- }
- return EXIT_SUCCESS;
- }
- #else /* !ENABLE_DESKTOP */
- int ps_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
- int ps_main(int argc UNUSED_PARAM, char **argv UNUSED_PARAM)
- {
- procps_status_t *p;
- int psscan_flags = PSSCAN_PID | PSSCAN_UIDGID
- | PSSCAN_STATE | PSSCAN_VSZ | PSSCAN_COMM;
- unsigned terminal_width IF_NOT_FEATURE_PS_WIDE(= 79);
- enum {
- OPT_Z = (1 << 0) * ENABLE_SELINUX,
- OPT_T = (1 << ENABLE_SELINUX) * ENABLE_FEATURE_SHOW_THREADS,
- OPT_l = (1 << ENABLE_SELINUX) * (1 << ENABLE_FEATURE_SHOW_THREADS) * ENABLE_FEATURE_PS_LONG,
- };
- #if ENABLE_FEATURE_PS_LONG
- time_t now = now; /* for compiler */
- unsigned long uptime = uptime;
- #endif
- /* If we support any options, parse argv */
- #if ENABLE_SELINUX || ENABLE_FEATURE_SHOW_THREADS || ENABLE_FEATURE_PS_WIDE || ENABLE_FEATURE_PS_LONG
- int opts = 0;
- # if ENABLE_FEATURE_PS_WIDE
- /* -w is a bit complicated */
- int w_count = 0;
- opt_complementary = "-:ww";
- opts = getopt32(argv, IF_SELINUX("Z")IF_FEATURE_SHOW_THREADS("T")IF_FEATURE_PS_LONG("l")
- "w", &w_count);
- /* if w is given once, GNU ps sets the width to 132,
- * if w is given more than once, it is "unlimited"
- */
- if (w_count) {
- terminal_width = (w_count == 1) ? 132 : MAX_WIDTH;
- } else {
- terminal_width = get_terminal_width(0);
- /* Go one less... */
- if (--terminal_width > MAX_WIDTH)
- terminal_width = MAX_WIDTH;
- }
- # else
- /* -w is not supported, only -Z and/or -T */
- opt_complementary = "-";
- opts = getopt32(argv, IF_SELINUX("Z")IF_FEATURE_SHOW_THREADS("T")IF_FEATURE_PS_LONG("l"));
- # endif
- # if ENABLE_SELINUX
- if ((opts & OPT_Z) && is_selinux_enabled()) {
- psscan_flags = PSSCAN_PID | PSSCAN_CONTEXT
- | PSSCAN_STATE | PSSCAN_COMM;
- puts(" PID CONTEXT STAT COMMAND");
- } else
- # endif
- if (opts & OPT_l) {
- psscan_flags = PSSCAN_STATE | PSSCAN_UIDGID | PSSCAN_PID | PSSCAN_PPID
- | PSSCAN_TTY | PSSCAN_STIME | PSSCAN_UTIME | PSSCAN_COMM
- | PSSCAN_VSZ | PSSCAN_RSS;
- /* http://pubs.opengroup.org/onlinepubs/9699919799/utilities/ps.html
- * mandates for -l:
- * -F Flags (?)
- * S State
- * UID,PID,PPID
- * -C CPU usage
- * -PRI The priority of the process; higher numbers mean lower priority
- * -NI Nice value
- * -ADDR The address of the process (?)
- * SZ The size in blocks of the core image
- * -WCHAN The event for which the process is waiting or sleeping
- * TTY
- * TIME The cumulative execution time
- * CMD
- * We don't show fields marked with '-'.
- * We show VSZ and RSS instead of SZ.
- * We also show STIME (standard says that -f shows it, -l doesn't).
- */
- puts("S UID PID PPID VSZ RSS TTY STIME TIME CMD");
- # if ENABLE_FEATURE_PS_LONG
- now = time(NULL);
- uptime = get_uptime();
- # endif
- }
- else {
- puts(" PID USER VSZ STAT COMMAND");
- }
- if (opts & OPT_T) {
- psscan_flags |= PSSCAN_TASKS;
- }
- #endif
- p = NULL;
- while ((p = procps_scan(p, psscan_flags)) != NULL) {
- int len;
- #if ENABLE_SELINUX
- if (psscan_flags & PSSCAN_CONTEXT) {
- len = printf("%5u %-32.32s %s ",
- p->pid,
- p->context ? p->context : "unknown",
- p->state);
- } else
- #endif
- {
- char buf6[6];
- smart_ulltoa5(p->vsz, buf6, " mgtpezy")[0] = '\0';
- #if ENABLE_FEATURE_PS_LONG
- if (opts & OPT_l) {
- char bufr[6], stime_str[6];
- char tty[2 * sizeof(int)*3 + 2];
- char *endp;
- unsigned sut = (p->stime + p->utime) / 100;
- unsigned elapsed = uptime - (p->start_time / 100);
- time_t start = now - elapsed;
- struct tm *tm = localtime(&start);
- smart_ulltoa5(p->rss, bufr, " mgtpezy")[0] = '\0';
- if (p->tty_major == 136)
- /* It should be pts/N, not ptsN, but N > 9
- * will overflow field width...
- */
- endp = stpcpy(tty, "pts");
- else
- if (p->tty_major == 4) {
- endp = stpcpy(tty, "tty");
- if (p->tty_minor >= 64) {
- p->tty_minor -= 64;
- *endp++ = 'S';
- }
- }
- else
- endp = tty + sprintf(tty, "%d:", p->tty_major);
- strcpy(endp, utoa(p->tty_minor));
- strftime(stime_str, 6, (elapsed >= (24 * 60 * 60)) ? "%b%d" : "%H:%M", tm);
- stime_str[5] = '\0';
- // S UID PID PPID VSZ RSS TTY STIME TIME CMD
- len = printf("%c %5u %5u %5u %5s %5s %-5s %s %02u:%02u:%02u ",
- p->state[0], p->uid, p->pid, p->ppid, buf6, bufr, tty,
- stime_str, sut / 3600, (sut % 3600) / 60, sut % 60);
- } else
- #endif
- {
- const char *user = get_cached_username(p->uid);
- len = printf("%5u %-8.8s %s %s ",
- p->pid, user, buf6, p->state);
- }
- }
- {
- int sz = terminal_width - len;
- if (sz >= 0) {
- char buf[sz + 1];
- read_cmdline(buf, sz, p->pid, p->comm);
- puts(buf);
- }
- }
- }
- if (ENABLE_FEATURE_CLEAN_UP)
- clear_username_cache();
- return EXIT_SUCCESS;
- }
- #endif /* !ENABLE_DESKTOP */
|