123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336 |
- /* vi: set sw=4 ts=4: */
- /*
- * Mini swapon/swapoff implementation for busybox
- *
- * Copyright (C) 1999-2004 by Erik Andersen <andersen@codepoet.org>
- *
- * Licensed under GPLv2, see file LICENSE in this source tree.
- */
- //config:config SWAPON
- //config: bool "swapon (15 kb)"
- //config: default y
- //config: help
- //config: Once you have created some swap space using 'mkswap', you also need
- //config: to enable your swap space with the 'swapon' utility. The 'swapoff'
- //config: utility is used, typically at system shutdown, to disable any swap
- //config: space. If you are not using any swap space, you can leave this
- //config: option disabled.
- //config:
- //config:config FEATURE_SWAPON_DISCARD
- //config: bool "Support discard option -d"
- //config: default y
- //config: depends on SWAPON
- //config: help
- //config: Enable support for discarding swap area blocks at swapon and/or as
- //config: the kernel frees them. This option enables both the -d option on
- //config: 'swapon' and the 'discard' option for swap entries in /etc/fstab.
- //config:
- //config:config FEATURE_SWAPON_PRI
- //config: bool "Support priority option -p"
- //config: default y
- //config: depends on SWAPON
- //config: help
- //config: Enable support for setting swap device priority in swapon.
- //config:
- //config:config SWAPOFF
- //config: bool "swapoff (14 kb)"
- //config: default y
- //config:
- //config:config FEATURE_SWAPONOFF_LABEL
- //config: bool "Support specifying devices by label or UUID"
- //config: default y
- //config: depends on SWAPON || SWAPOFF
- //config: select VOLUMEID
- //config: help
- //config: This allows for specifying a device by label or uuid, rather than by
- //config: name. This feature utilizes the same functionality as blkid/findfs.
- // APPLET_ODDNAME:name main location suid_type help
- //applet:IF_SWAPON( APPLET_ODDNAME(swapon, swap_on_off, BB_DIR_SBIN, BB_SUID_DROP, swapon))
- //applet:IF_SWAPOFF(APPLET_ODDNAME(swapoff, swap_on_off, BB_DIR_SBIN, BB_SUID_DROP, swapoff))
- //kbuild:lib-$(CONFIG_SWAPON) += swaponoff.o
- //kbuild:lib-$(CONFIG_SWAPOFF) += swaponoff.o
- //usage:#define swapon_trivial_usage
- //usage: "[-a] [-e]" IF_FEATURE_SWAPON_DISCARD(" [-d[POL]]") IF_FEATURE_SWAPON_PRI(" [-p PRI]") " [DEVICE]"
- //usage:#define swapon_full_usage "\n\n"
- //usage: "Start swapping on DEVICE\n"
- //usage: "\n -a Start swapping on all swap devices"
- //usage: IF_FEATURE_SWAPON_DISCARD(
- //usage: "\n -d[POL] Discard blocks at swapon (POL=once),"
- //usage: "\n as freed (POL=pages), or both (POL omitted)"
- //usage: )
- //usage: "\n -e Silently skip devices that do not exist"
- //usage: IF_FEATURE_SWAPON_PRI(
- //usage: "\n -p PRI Set swap device priority"
- //usage: )
- //usage:
- //usage:#define swapoff_trivial_usage
- //usage: "[-a] [DEVICE]"
- //usage:#define swapoff_full_usage "\n\n"
- //usage: "Stop swapping on DEVICE\n"
- //usage: "\n -a Stop swapping on all swap devices"
- #include "libbb.h"
- #include "common_bufsiz.h"
- #include <mntent.h>
- #ifndef __BIONIC__
- # include <sys/swap.h>
- #endif
- #if ENABLE_FEATURE_SWAPONOFF_LABEL
- # include "volume_id.h"
- #else
- # define resolve_mount_spec(fsname) ((void)0)
- #endif
- #ifndef MNTTYPE_SWAP
- # define MNTTYPE_SWAP "swap"
- #endif
- #if ENABLE_FEATURE_SWAPON_DISCARD
- #ifndef SWAP_FLAG_DISCARD
- #define SWAP_FLAG_DISCARD 0x10000
- #endif
- #ifndef SWAP_FLAG_DISCARD_ONCE
- #define SWAP_FLAG_DISCARD_ONCE 0x20000
- #endif
- #ifndef SWAP_FLAG_DISCARD_PAGES
- #define SWAP_FLAG_DISCARD_PAGES 0x40000
- #endif
- #define SWAP_FLAG_DISCARD_MASK \
- (SWAP_FLAG_DISCARD | SWAP_FLAG_DISCARD_ONCE | SWAP_FLAG_DISCARD_PAGES)
- #endif
- #if ENABLE_FEATURE_SWAPON_DISCARD || ENABLE_FEATURE_SWAPON_PRI
- struct globals {
- int flags;
- } FIX_ALIASING;
- #define G (*(struct globals*)bb_common_bufsiz1)
- #define g_flags (G.flags)
- #define save_g_flags() int save_g_flags = g_flags
- #define restore_g_flags() g_flags = save_g_flags
- #else
- #define g_flags 0
- #define save_g_flags() ((void)0)
- #define restore_g_flags() ((void)0)
- #endif
- #define INIT_G() do { setup_common_bufsiz(); } while (0)
- #if ENABLE_SWAPOFF
- # if ENABLE_SWAPON
- # define do_swapoff (applet_name[5] == 'f')
- # else
- # define do_swapoff 1
- # endif
- #else
- # define do_swapoff 0
- #endif
- /* Command line options */
- enum {
- OPTBIT_a, /* -a all */
- OPTBIT_e, /* -e ifexists */
- IF_FEATURE_SWAPON_DISCARD( OPTBIT_d ,) /* -d discard */
- IF_FEATURE_SWAPON_PRI ( OPTBIT_p ,) /* -p priority */
- OPT_a = 1 << OPTBIT_a,
- OPT_e = 1 << OPTBIT_e,
- OPT_d = IF_FEATURE_SWAPON_DISCARD((1 << OPTBIT_d)) + 0,
- OPT_p = IF_FEATURE_SWAPON_PRI ((1 << OPTBIT_p)) + 0,
- };
- #define OPT_ALL (option_mask32 & OPT_a)
- #define OPT_DISCARD (option_mask32 & OPT_d)
- #define OPT_IFEXISTS (option_mask32 & OPT_e)
- #define OPT_PRIO (option_mask32 & OPT_p)
- static int swap_enable_disable(char *device)
- {
- int err = 0;
- int quiet = 0;
- resolve_mount_spec(&device);
- if (do_swapoff) {
- err = swapoff(device);
- /* Don't complain on OPT_ALL if not a swap device or if it doesn't exist */
- quiet = (OPT_ALL && (errno == EINVAL || errno == ENOENT));
- } else {
- /* swapon */
- struct stat st;
- err = stat(device, &st);
- if (!err) {
- if (ENABLE_DESKTOP && S_ISREG(st.st_mode)) {
- if (st.st_blocks * (off_t)512 < st.st_size) {
- bb_error_msg("%s: file has holes", device);
- return 1;
- }
- }
- err = swapon(device, g_flags);
- /* Don't complain on swapon -a if device is already in use */
- quiet = (OPT_ALL && errno == EBUSY);
- }
- /* Don't complain if file does not exist with -e option */
- if (err && OPT_IFEXISTS && errno == ENOENT)
- err = 0;
- }
- if (err && !quiet) {
- bb_simple_perror_msg(device);
- return 1;
- }
- return 0;
- }
- #if ENABLE_FEATURE_SWAPON_DISCARD
- static void set_discard_flag(char *s)
- {
- /* Unset the flag first to allow fstab options to override */
- /* options set on the command line */
- g_flags = (g_flags & ~SWAP_FLAG_DISCARD_MASK) | SWAP_FLAG_DISCARD;
- if (!s) /* No optional policy value on the commandline */
- return;
- /* Skip prepended '=' */
- if (*s == '=')
- s++;
- /* For fstab parsing: remove other appended options */
- *strchrnul(s, ',') = '\0';
- if (strcmp(s, "once") == 0)
- g_flags |= SWAP_FLAG_DISCARD_ONCE;
- if (strcmp(s, "pages") == 0)
- g_flags |= SWAP_FLAG_DISCARD_PAGES;
- }
- #else
- #define set_discard_flag(s) ((void)0)
- #endif
- #if ENABLE_FEATURE_SWAPON_PRI
- static void set_priority_flag(char *s)
- {
- unsigned prio;
- /* For fstab parsing: remove other appended options */
- *strchrnul(s, ',') = '\0';
- /* Max allowed 32767 (== SWAP_FLAG_PRIO_MASK) */
- prio = bb_strtou(s, NULL, 10);
- if (!errno) {
- /* Unset the flag first to allow fstab options to override */
- /* options set on the command line */
- g_flags = (g_flags & ~SWAP_FLAG_PRIO_MASK) | SWAP_FLAG_PREFER |
- MIN(prio, SWAP_FLAG_PRIO_MASK);
- }
- }
- #else
- #define set_priority_flag(s) ((void)0)
- #endif
- static int do_em_all_in_fstab(void)
- {
- struct mntent *m;
- int err = 0;
- FILE *f = xfopen_for_read("/etc/fstab");
- while ((m = getmntent(f)) != NULL) {
- if (strcmp(m->mnt_type, MNTTYPE_SWAP) == 0) {
- /* swapon -a should ignore entries with noauto,
- * but swapoff -a should process them
- */
- if (do_swapoff || hasmntopt(m, MNTOPT_NOAUTO) == NULL) {
- /* each swap space might have different flags */
- /* save global flags for the next round */
- save_g_flags();
- if (ENABLE_FEATURE_SWAPON_DISCARD) {
- char *p = hasmntopt(m, "discard");
- if (p) {
- /* move to '=' or to end of string */
- p += 7;
- set_discard_flag(p);
- }
- }
- if (ENABLE_FEATURE_SWAPON_PRI) {
- char *p = hasmntopt(m, "pri");
- if (p) {
- set_priority_flag(p + 4);
- }
- }
- err |= swap_enable_disable(m->mnt_fsname);
- restore_g_flags();
- }
- }
- }
- if (ENABLE_FEATURE_CLEAN_UP)
- endmntent(f);
- return err;
- }
- static int do_all_in_proc_swaps(void)
- {
- char *line;
- int err = 0;
- FILE *f = fopen_for_read("/proc/swaps");
- /* Don't complain if missing */
- if (f) {
- while ((line = xmalloc_fgetline(f)) != NULL) {
- if (line[0] == '/') {
- *strchrnul(line, ' ') = '\0';
- err |= swap_enable_disable(line);
- }
- free(line);
- }
- if (ENABLE_FEATURE_CLEAN_UP)
- fclose(f);
- }
- return err;
- }
- #define OPTSTR_SWAPON "ae" \
- IF_FEATURE_SWAPON_DISCARD("d::") \
- IF_FEATURE_SWAPON_PRI("p:")
- int swap_on_off_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
- int swap_on_off_main(int argc UNUSED_PARAM, char **argv)
- {
- IF_FEATURE_SWAPON_PRI(char *prio;)
- IF_FEATURE_SWAPON_DISCARD(char *discard = NULL;)
- int ret = 0;
- INIT_G();
- getopt32(argv, do_swapoff ? "ae" : OPTSTR_SWAPON
- IF_FEATURE_SWAPON_DISCARD(, &discard)
- IF_FEATURE_SWAPON_PRI(, &prio)
- );
- argv += optind;
- if (OPT_DISCARD) {
- set_discard_flag(discard);
- }
- if (OPT_PRIO) {
- set_priority_flag(prio);
- }
- if (OPT_ALL) {
- /* swapoff -a does also /proc/swaps */
- if (do_swapoff)
- ret = do_all_in_proc_swaps();
- ret |= do_em_all_in_fstab();
- } else if (!*argv) {
- /* if not -a we need at least one arg */
- bb_show_usage();
- }
- /* Unset -a now to allow for more messages in swap_enable_disable */
- option_mask32 = option_mask32 & ~OPT_a;
- /* Now process devices on the commandline if any */
- while (*argv) {
- ret |= swap_enable_disable(*argv++);
- }
- return ret;
- }
|