3
0

e2fsck.h 31 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640
  1. /* vi: set sw=4 ts=4: */
  2. #include <sys/types.h>
  3. #include <stdio.h>
  4. #include <string.h>
  5. #include <unistd.h>
  6. #include <stdlib.h>
  7. #include <time.h>
  8. #include <fcntl.h>
  9. #include <ctype.h>
  10. #include <setjmp.h>
  11. #include <errno.h>
  12. #include <getopt.h>
  13. #include <limits.h>
  14. #include <stddef.h>
  15. #include <assert.h>
  16. #include <signal.h>
  17. #include <sys/stat.h>
  18. #include <sys/resource.h>
  19. #include <sys/param.h>
  20. #include <sys/mount.h>
  21. #include <sys/ioctl.h>
  22. #include <termios.h>
  23. #include <mntent.h>
  24. #include <dirent.h>
  25. #include "ext2fs/kernel-list.h"
  26. #include <sys/types.h>
  27. #include <linux/types.h>
  28. /*
  29. * Now pull in the real linux/jfs.h definitions.
  30. */
  31. #include "ext2fs/kernel-jbd.h"
  32. #include "fsck.h"
  33. #include "ext2fs/ext2_fs.h"
  34. #include "blkid/blkid.h"
  35. #include "ext2fs/ext2_ext_attr.h"
  36. #include "uuid/uuid.h"
  37. #include "busybox.h"
  38. #ifdef HAVE_CONIO_H
  39. #undef HAVE_TERMIOS_H
  40. #include <conio.h>
  41. #define read_a_char() getch()
  42. #else
  43. #ifdef HAVE_TERMIOS_H
  44. #include <termios.h>
  45. #endif
  46. #endif
  47. /*
  48. * The last ext2fs revision level that this version of e2fsck is able to
  49. * support
  50. */
  51. #define E2FSCK_CURRENT_REV 1
  52. /* Used by the region allocation code */
  53. typedef __u32 region_addr_t;
  54. typedef struct region_struct *region_t;
  55. struct dx_dirblock_info {
  56. int type;
  57. blk_t phys;
  58. int flags;
  59. blk_t parent;
  60. ext2_dirhash_t min_hash;
  61. ext2_dirhash_t max_hash;
  62. ext2_dirhash_t node_min_hash;
  63. ext2_dirhash_t node_max_hash;
  64. };
  65. /*
  66. These defines are used in the type field of dx_dirblock_info
  67. */
  68. #define DX_DIRBLOCK_ROOT 1
  69. #define DX_DIRBLOCK_LEAF 2
  70. #define DX_DIRBLOCK_NODE 3
  71. /*
  72. The following defines are used in the 'flags' field of a dx_dirblock_info
  73. */
  74. #define DX_FLAG_REFERENCED 1
  75. #define DX_FLAG_DUP_REF 2
  76. #define DX_FLAG_FIRST 4
  77. #define DX_FLAG_LAST 8
  78. /*
  79. * E2fsck options
  80. */
  81. #define E2F_OPT_READONLY 0x0001
  82. #define E2F_OPT_PREEN 0x0002
  83. #define E2F_OPT_YES 0x0004
  84. #define E2F_OPT_NO 0x0008
  85. #define E2F_OPT_TIME 0x0010
  86. #define E2F_OPT_CHECKBLOCKS 0x0040
  87. #define E2F_OPT_DEBUG 0x0080
  88. #define E2F_OPT_FORCE 0x0100
  89. #define E2F_OPT_WRITECHECK 0x0200
  90. #define E2F_OPT_COMPRESS_DIRS 0x0400
  91. /*
  92. * E2fsck flags
  93. */
  94. #define E2F_FLAG_ABORT 0x0001 /* Abort signaled */
  95. #define E2F_FLAG_CANCEL 0x0002 /* Cancel signaled */
  96. #define E2F_FLAG_SIGNAL_MASK 0x0003
  97. #define E2F_FLAG_RESTART 0x0004 /* Restart signaled */
  98. #define E2F_FLAG_SETJMP_OK 0x0010 /* Setjmp valid for abort */
  99. #define E2F_FLAG_PROG_BAR 0x0020 /* Progress bar on screen */
  100. #define E2F_FLAG_PROG_SUPPRESS 0x0040 /* Progress suspended */
  101. #define E2F_FLAG_JOURNAL_INODE 0x0080 /* Create a new ext3 journal inode */
  102. #define E2F_FLAG_SB_SPECIFIED 0x0100 /* The superblock was explicitly
  103. * specified by the user */
  104. #define E2F_FLAG_RESTARTED 0x0200 /* E2fsck has been restarted */
  105. #define E2F_FLAG_RESIZE_INODE 0x0400 /* Request to recreate resize inode */
  106. /*Don't know where these come from*/
  107. #define READ 0
  108. #define WRITE 1
  109. #define cpu_to_be32(n) htonl(n)
  110. #define be32_to_cpu(n) ntohl(n)
  111. /*
  112. * We define a set of "latch groups"; these are problems which are
  113. * handled as a set. The user answers once for a particular latch
  114. * group.
  115. */
  116. #define PR_LATCH_MASK 0x0ff0 /* Latch mask */
  117. #define PR_LATCH_BLOCK 0x0010 /* Latch for illegal blocks (pass 1) */
  118. #define PR_LATCH_BBLOCK 0x0020 /* Latch for bad block inode blocks (pass 1) */
  119. #define PR_LATCH_IBITMAP 0x0030 /* Latch for pass 5 inode bitmap proc. */
  120. #define PR_LATCH_BBITMAP 0x0040 /* Latch for pass 5 inode bitmap proc. */
  121. #define PR_LATCH_RELOC 0x0050 /* Latch for superblock relocate hint */
  122. #define PR_LATCH_DBLOCK 0x0060 /* Latch for pass 1b dup block headers */
  123. #define PR_LATCH_LOW_DTIME 0x0070 /* Latch for pass1 orphaned list refugees */
  124. #define PR_LATCH_TOOBIG 0x0080 /* Latch for file to big errors */
  125. #define PR_LATCH_OPTIMIZE_DIR 0x0090 /* Latch for optimize directories */
  126. #define PR_LATCH(x) ((((x) & PR_LATCH_MASK) >> 4) - 1)
  127. /*
  128. * Latch group descriptor flags
  129. */
  130. #define PRL_YES 0x0001 /* Answer yes */
  131. #define PRL_NO 0x0002 /* Answer no */
  132. #define PRL_LATCHED 0x0004 /* The latch group is latched */
  133. #define PRL_SUPPRESS 0x0008 /* Suppress all latch group questions */
  134. #define PRL_VARIABLE 0x000f /* All the flags that need to be reset */
  135. /*
  136. * Pre-Pass 1 errors
  137. */
  138. #define PR_0_BB_NOT_GROUP 0x000001 /* Block bitmap not in group */
  139. #define PR_0_IB_NOT_GROUP 0x000002 /* Inode bitmap not in group */
  140. #define PR_0_ITABLE_NOT_GROUP 0x000003 /* Inode table not in group */
  141. #define PR_0_SB_CORRUPT 0x000004 /* Superblock corrupt */
  142. #define PR_0_FS_SIZE_WRONG 0x000005 /* Filesystem size is wrong */
  143. #define PR_0_NO_FRAGMENTS 0x000006 /* Fragments not supported */
  144. #define PR_0_BLOCKS_PER_GROUP 0x000007 /* Bad blocks_per_group */
  145. #define PR_0_FIRST_DATA_BLOCK 0x000008 /* Bad first_data_block */
  146. #define PR_0_ADD_UUID 0x000009 /* Adding UUID to filesystem */
  147. #define PR_0_RELOCATE_HINT 0x00000A /* Relocate hint */
  148. #define PR_0_MISC_CORRUPT_SUPER 0x00000B /* Miscellaneous superblock corruption */
  149. #define PR_0_GETSIZE_ERROR 0x00000C /* Error determing physical device size of filesystem */
  150. #define PR_0_INODE_COUNT_WRONG 0x00000D /* Inode count in the superblock incorrect */
  151. #define PR_0_HURD_CLEAR_FILETYPE 0x00000E /* The Hurd does not support the filetype feature */
  152. #define PR_0_JOURNAL_BAD_INODE 0x00000F /* The Hurd does not support the filetype feature */
  153. #define PR_0_JOURNAL_UNSUPP_MULTIFS 0x000010 /* The external journal has multiple filesystems (which we can't handle yet) */
  154. #define PR_0_CANT_FIND_JOURNAL 0x000011 /* Can't find external journal */
  155. #define PR_0_EXT_JOURNAL_BAD_SUPER 0x000012/* External journal has bad superblock */
  156. #define PR_0_JOURNAL_BAD_UUID 0x000013 /* Superblock has a bad journal UUID */
  157. #define PR_0_JOURNAL_UNSUPP_SUPER 0x000014 /* Journal has an unknown superblock type */
  158. #define PR_0_JOURNAL_BAD_SUPER 0x000015 /* Journal superblock is corrupt */
  159. #define PR_0_JOURNAL_HAS_JOURNAL 0x000016 /* Journal superblock is corrupt */
  160. #define PR_0_JOURNAL_RECOVER_SET 0x000017 /* Superblock has recovery flag set but no journal */
  161. #define PR_0_JOURNAL_RECOVERY_CLEAR 0x000018 /* Journal has data, but recovery flag is clear */
  162. #define PR_0_JOURNAL_RESET_JOURNAL 0x000019 /* Ask if we should clear the journal */
  163. #define PR_0_FS_REV_LEVEL 0x00001A /* Filesystem revision is 0, but feature flags are set */
  164. #define PR_0_ORPHAN_CLEAR_INODE 0x000020 /* Clearing orphan inode */
  165. #define PR_0_ORPHAN_ILLEGAL_BLOCK_NUM 0x000021 /* Illegal block found in orphaned inode */
  166. #define PR_0_ORPHAN_ALREADY_CLEARED_BLOCK 0x000022 /* Already cleared block found in orphaned inode */
  167. #define PR_0_ORPHAN_ILLEGAL_HEAD_INODE 0x000023 /* Illegal orphan inode in superblock */
  168. #define PR_0_ORPHAN_ILLEGAL_INODE 0x000024 /* Illegal inode in orphaned inode list */
  169. #define PR_0_JOURNAL_UNSUPP_ROCOMPAT 0x000025 /* Journal has unsupported read-only feature - abort */
  170. #define PR_0_JOURNAL_UNSUPP_INCOMPAT 0x000026 /* Journal has unsupported incompatible feature - abort */
  171. #define PR_0_JOURNAL_UNSUPP_VERSION 0x000027 /* Journal has unsupported version number */
  172. #define PR_0_MOVE_JOURNAL 0x000028 /* Moving journal to hidden file */
  173. #define PR_0_ERR_MOVE_JOURNAL 0x000029 /* Error moving journal */
  174. #define PR_0_CLEAR_V2_JOURNAL 0x00002A /* Clearing V2 journal superblock */
  175. #define PR_0_JOURNAL_RUN 0x00002B /* Run journal anyway */
  176. #define PR_0_JOURNAL_RUN_DEFAULT 0x00002C /* Run journal anyway by default */
  177. #define PR_0_BACKUP_JNL 0x00002D /* Backup journal inode blocks */
  178. #define PR_0_NONZERO_RESERVED_GDT_BLOCKS 0x00002E /* Reserved blocks w/o resize_inode */
  179. #define PR_0_CLEAR_RESIZE_INODE 0x00002F /* Resize_inode not enabled, but resize inode is non-zero */
  180. #define PR_0_RESIZE_INODE_INVALID 0x000030 /* Resize inode invalid */
  181. /*
  182. * Pass 1 errors
  183. */
  184. #define PR_1_PASS_HEADER 0x010000 /* Pass 1: Checking inodes, blocks, and sizes */
  185. #define PR_1_ROOT_NO_DIR 0x010001 /* Root directory is not an inode */
  186. #define PR_1_ROOT_DTIME 0x010002 /* Root directory has dtime set */
  187. #define PR_1_RESERVED_BAD_MODE 0x010003 /* Reserved inode has bad mode */
  188. #define PR_1_ZERO_DTIME 0x010004 /* Deleted inode has zero dtime */
  189. #define PR_1_SET_DTIME 0x010005 /* Inode in use, but dtime set */
  190. #define PR_1_ZERO_LENGTH_DIR 0x010006 /* Zero-length directory */
  191. #define PR_1_BB_CONFLICT 0x010007 /* Block bitmap conflicts with some other fs block */
  192. #define PR_1_IB_CONFLICT 0x010008 /* Inode bitmap conflicts with some other fs block */
  193. #define PR_1_ITABLE_CONFLICT 0x010009 /* Inode table conflicts with some other fs block */
  194. #define PR_1_BB_BAD_BLOCK 0x01000A /* Block bitmap is on a bad block */
  195. #define PR_1_IB_BAD_BLOCK 0x01000B /* Inode bitmap is on a bad block */
  196. #define PR_1_BAD_I_SIZE 0x01000C /* Inode has incorrect i_size */
  197. #define PR_1_BAD_I_BLOCKS 0x01000D /* Inode has incorrect i_blocks */
  198. #define PR_1_ILLEGAL_BLOCK_NUM 0x01000E /* Illegal block number in inode */
  199. #define PR_1_BLOCK_OVERLAPS_METADATA 0x01000F /* Block number overlaps fs metadata */
  200. #define PR_1_INODE_BLOCK_LATCH 0x010010 /* Inode has illegal blocks (latch question) */
  201. #define PR_1_TOO_MANY_BAD_BLOCKS 0x010011 /* Too many bad blocks in inode */
  202. #define PR_1_BB_ILLEGAL_BLOCK_NUM 0x010012 /* Illegal block number in bad block inode */
  203. #define PR_1_INODE_BBLOCK_LATCH 0x010013 /* Bad block inode has illegal blocks (latch question) */
  204. #define PR_1_DUP_BLOCKS_PREENSTOP 0x010014 /* Duplicate or bad blocks in use! */
  205. #define PR_1_BBINODE_BAD_METABLOCK 0x010015 /* Bad block used as bad block indirect block */
  206. #define PR_1_BBINODE_BAD_METABLOCK_PROMPT 0x010016 /* Inconsistency can't be fixed prompt */
  207. #define PR_1_BAD_PRIMARY_BLOCK 0x010017 /* Bad primary block */
  208. #define PR_1_BAD_PRIMARY_BLOCK_PROMPT 0x010018 /* Bad primary block prompt */
  209. #define PR_1_BAD_PRIMARY_SUPERBLOCK 0x010019 /* Bad primary superblock */
  210. #define PR_1_BAD_PRIMARY_GROUP_DESCRIPTOR 0x01001A /* Bad primary block group descriptors */
  211. #define PR_1_BAD_SUPERBLOCK 0x01001B /* Bad superblock in group */
  212. #define PR_1_BAD_GROUP_DESCRIPTORS 0x01001C /* Bad block group descriptors in group */
  213. #define PR_1_PROGERR_CLAIMED_BLOCK 0x01001D /* Block claimed for no reason */
  214. #define PR_1_RELOC_BLOCK_ALLOCATE 0x01001E /* Error allocating blocks for relocating metadata */
  215. #define PR_1_RELOC_MEMORY_ALLOCATE 0x01001F /* Error allocating block buffer during relocation process */
  216. #define PR_1_RELOC_FROM_TO 0x010020 /* Relocating metadata group information from X to Y */
  217. #define PR_1_RELOC_TO 0x010021 /* Relocating metatdata group information to X */
  218. #define PR_1_RELOC_READ_ERR 0x010022 /* Block read error during relocation process */
  219. #define PR_1_RELOC_WRITE_ERR 0x010023 /* Block write error during relocation process */
  220. #define PR_1_ALLOCATE_IBITMAP_ERROR 0x010024 /* Error allocating inode bitmap */
  221. #define PR_1_ALLOCATE_BBITMAP_ERROR 0x010025 /* Error allocating block bitmap */
  222. #define PR_1_ALLOCATE_ICOUNT 0x010026 /* Error allocating icount structure */
  223. #define PR_1_ALLOCATE_DBCOUNT 0x010027 /* Error allocating dbcount */
  224. #define PR_1_ISCAN_ERROR 0x010028 /* Error while scanning inodes */
  225. #define PR_1_BLOCK_ITERATE 0x010029 /* Error while iterating over blocks */
  226. #define PR_1_ICOUNT_STORE 0x01002A /* Error while storing inode count information */
  227. #define PR_1_ADD_DBLOCK 0x01002B /* Error while storing directory block information */
  228. #define PR_1_READ_INODE 0x01002C /* Error while reading inode (for clearing) */
  229. #define PR_1_SUPPRESS_MESSAGES 0x01002D /* Suppress messages prompt */
  230. #define PR_1_SET_IMAGIC 0x01002F /* Imagic flag set on an inode when filesystem doesn't support it */
  231. #define PR_1_SET_IMMUTABLE 0x010030 /* Immutable flag set on a device or socket inode */
  232. #define PR_1_COMPR_SET 0x010031 /* Compression flag set on a non-compressed filesystem */
  233. #define PR_1_SET_NONZSIZE 0x010032 /* Non-zero size on on device, fifo or socket inode */
  234. #define PR_1_FS_REV_LEVEL 0x010033 /* Filesystem revision is 0, but feature flags are set */
  235. #define PR_1_JOURNAL_INODE_NOT_CLEAR 0x010034 /* Journal inode not in use, needs clearing */
  236. #define PR_1_JOURNAL_BAD_MODE 0x010035 /* Journal inode has wrong mode */
  237. #define PR_1_LOW_DTIME 0x010036 /* Inode that was part of orphan linked list */
  238. #define PR_1_ORPHAN_LIST_REFUGEES 0x010037 /* Latch question which asks how to deal with low dtime inodes */
  239. #define PR_1_ALLOCATE_REFCOUNT 0x010038 /* Error allocating refcount structure */
  240. #define PR_1_READ_EA_BLOCK 0x010039 /* Error reading Extended Attribute block */
  241. #define PR_1_BAD_EA_BLOCK 0x01003A /* Invalid Extended Attribute block */
  242. #define PR_1_EXTATTR_READ_ABORT 0x01003B /* Error reading Extended Attribute block while fixing refcount -- abort */
  243. #define PR_1_EXTATTR_REFCOUNT 0x01003C /* Extended attribute reference count incorrect */
  244. #define PR_1_EXTATTR_WRITE 0x01003D /* Error writing Extended Attribute block while fixing refcount */
  245. #define PR_1_EA_MULTI_BLOCK 0x01003E /* Multiple EA blocks not supported */
  246. #define PR_1_EA_ALLOC_REGION 0x01003F /* Error allocating EA region allocation structure */
  247. #define PR_1_EA_ALLOC_COLLISION 0x010040 /* Error EA allocation collision */
  248. #define PR_1_EA_BAD_NAME 0x010041 /* Bad extended attribute name */
  249. #define PR_1_EA_BAD_VALUE 0x010042 /* Bad extended attribute value */
  250. #define PR_1_INODE_TOOBIG 0x010043 /* Inode too big (latch question) */
  251. #define PR_1_TOOBIG_DIR 0x010044 /* Directory too big */
  252. #define PR_1_TOOBIG_REG 0x010045 /* Regular file too big */
  253. #define PR_1_TOOBIG_SYMLINK 0x010046 /* Symlink too big */
  254. #define PR_1_HTREE_SET 0x010047 /* INDEX_FL flag set on a non-HTREE filesystem */
  255. #define PR_1_HTREE_NODIR 0x010048 /* INDEX_FL flag set on a non-directory */
  256. #define PR_1_HTREE_BADROOT 0x010049 /* Invalid root node in HTREE directory */
  257. #define PR_1_HTREE_HASHV 0x01004A /* Unsupported hash version in HTREE directory */
  258. #define PR_1_HTREE_INCOMPAT 0x01004B /* Incompatible flag in HTREE root node */
  259. #define PR_1_HTREE_DEPTH 0x01004C /* HTREE too deep */
  260. #define PR_1_BB_FS_BLOCK 0x01004D /* Bad block has indirect block that conflicts with filesystem block */
  261. #define PR_1_RESIZE_INODE_CREATE 0x01004E /* Resize inode failed */
  262. #define PR_1_EXTRA_ISIZE 0x01004F /* inode->i_size is too long */
  263. #define PR_1_ATTR_NAME_LEN 0x010050 /* attribute name is too long */
  264. #define PR_1_ATTR_VALUE_OFFSET 0x010051 /* wrong EA value offset */
  265. #define PR_1_ATTR_VALUE_BLOCK 0x010052 /* wrong EA blocknumber */
  266. #define PR_1_ATTR_VALUE_SIZE 0x010053 /* wrong EA value size */
  267. #define PR_1_ATTR_HASH 0x010054 /* wrong EA hash value */
  268. /*
  269. * Pass 1b errors
  270. */
  271. #define PR_1B_PASS_HEADER 0x011000 /* Pass 1B: Rescan for duplicate/bad blocks */
  272. #define PR_1B_DUP_BLOCK_HEADER 0x011001 /* Duplicate/bad block(s) header */
  273. #define PR_1B_DUP_BLOCK 0x011002 /* Duplicate/bad block(s) in inode */
  274. #define PR_1B_DUP_BLOCK_END 0x011003 /* Duplicate/bad block(s) end */
  275. #define PR_1B_ISCAN_ERROR 0x011004 /* Error while scanning inodes */
  276. #define PR_1B_ALLOCATE_IBITMAP_ERROR 0x011005 /* Error allocating inode bitmap */
  277. #define PR_1B_BLOCK_ITERATE 0x0110006 /* Error while iterating over blocks */
  278. #define PR_1B_ADJ_EA_REFCOUNT 0x0110007 /* Error adjusting EA refcount */
  279. #define PR_1C_PASS_HEADER 0x012000 /* Pass 1C: Scan directories for inodes with dup blocks. */
  280. #define PR_1D_PASS_HEADER 0x013000 /* Pass 1D: Reconciling duplicate blocks */
  281. #define PR_1D_DUP_FILE 0x013001 /* File has duplicate blocks */
  282. #define PR_1D_DUP_FILE_LIST 0x013002 /* List of files sharing duplicate blocks */
  283. #define PR_1D_SHARE_METADATA 0x013003 /* File sharing blocks with filesystem metadata */
  284. #define PR_1D_NUM_DUP_INODES 0x013004 /* Report of how many duplicate/bad inodes */
  285. #define PR_1D_DUP_BLOCKS_DEALT 0x013005 /* Duplicated blocks already reassigned or cloned. */
  286. #define PR_1D_CLONE_QUESTION 0x013006 /* Clone duplicate/bad blocks? */
  287. #define PR_1D_DELETE_QUESTION 0x013007 /* Delete file? */
  288. #define PR_1D_CLONE_ERROR 0x013008 /* Couldn't clone file (error) */
  289. /*
  290. * Pass 2 errors
  291. */
  292. #define PR_2_PASS_HEADER 0x020000 /* Pass 2: Checking directory structure */
  293. #define PR_2_BAD_INODE_DOT 0x020001 /* Bad inode number for '.' */
  294. #define PR_2_BAD_INO 0x020002 /* Directory entry has bad inode number */
  295. #define PR_2_UNUSED_INODE 0x020003 /* Directory entry has deleted or unused inode */
  296. #define PR_2_LINK_DOT 0x020004 /* Directry entry is link to '.' */
  297. #define PR_2_BB_INODE 0x020005 /* Directory entry points to inode now located in a bad block */
  298. #define PR_2_LINK_DIR 0x020006 /* Directory entry contains a link to a directory */
  299. #define PR_2_LINK_ROOT 0x020007 /* Directory entry contains a link to the root directry */
  300. #define PR_2_BAD_NAME 0x020008 /* Directory entry has illegal characters in its name */
  301. #define PR_2_MISSING_DOT 0x020009 /* Missing '.' in directory inode */
  302. #define PR_2_MISSING_DOT_DOT 0x02000A /* Missing '..' in directory inode */
  303. #define PR_2_1ST_NOT_DOT 0x02000B /* First entry in directory inode doesn't contain '.' */
  304. #define PR_2_2ND_NOT_DOT_DOT 0x02000C /* Second entry in directory inode doesn't contain '..' */
  305. #define PR_2_FADDR_ZERO 0x02000D /* i_faddr should be zero */
  306. #define PR_2_FILE_ACL_ZERO 0x02000E /* i_file_acl should be zero */
  307. #define PR_2_DIR_ACL_ZERO 0x02000F /* i_dir_acl should be zero */
  308. #define PR_2_FRAG_ZERO 0x020010 /* i_frag should be zero */
  309. #define PR_2_FSIZE_ZERO 0x020011 /* i_fsize should be zero */
  310. #define PR_2_BAD_MODE 0x020012 /* inode has bad mode */
  311. #define PR_2_DIR_CORRUPTED 0x020013 /* directory corrupted */
  312. #define PR_2_FILENAME_LONG 0x020014 /* filename too long */
  313. #define PR_2_DIRECTORY_HOLE 0x020015 /* Directory inode has a missing block (hole) */
  314. #define PR_2_DOT_NULL_TERM 0x020016 /* '.' is not NULL terminated */
  315. #define PR_2_DOT_DOT_NULL_TERM 0x020017 /* '..' is not NULL terminated */
  316. #define PR_2_BAD_CHAR_DEV 0x020018 /* Illegal character device in inode */
  317. #define PR_2_BAD_BLOCK_DEV 0x020019 /* Illegal block device in inode */
  318. #define PR_2_DUP_DOT 0x02001A /* Duplicate '.' entry */
  319. #define PR_2_DUP_DOT_DOT 0x02001B /* Duplicate '..' entry */
  320. #define PR_2_NO_DIRINFO 0x02001C /* Internal error: couldn't find dir_info */
  321. #define PR_2_FINAL_RECLEN 0x02001D /* Final rec_len is wrong */
  322. #define PR_2_ALLOCATE_ICOUNT 0x02001E /* Error allocating icount structure */
  323. #define PR_2_DBLIST_ITERATE 0x02001F /* Error iterating over directory blocks */
  324. #define PR_2_READ_DIRBLOCK 0x020020 /* Error reading directory block */
  325. #define PR_2_WRITE_DIRBLOCK 0x020021 /* Error writing directory block */
  326. #define PR_2_ALLOC_DIRBOCK 0x020022 /* Error allocating new directory block */
  327. #define PR_2_DEALLOC_INODE 0x020023 /* Error deallocating inode */
  328. #define PR_2_SPLIT_DOT 0x020024 /* Directory entry for '.' is big. Split? */
  329. #define PR_2_BAD_FIFO 0x020025 /* Illegal FIFO */
  330. #define PR_2_BAD_SOCKET 0x020026 /* Illegal socket */
  331. #define PR_2_SET_FILETYPE 0x020027 /* Directory filetype not set */
  332. #define PR_2_BAD_FILETYPE 0x020028 /* Directory filetype incorrect */
  333. #define PR_2_CLEAR_FILETYPE 0x020029 /* Directory filetype set when it shouldn't be */
  334. #define PR_2_NULL_NAME 0x020030 /* Directory filename can't be zero-length */
  335. #define PR_2_INVALID_SYMLINK 0x020031 /* Invalid symlink */
  336. #define PR_2_FILE_ACL_BAD 0x020032 /* i_file_acl (extended attribute) is bad */
  337. #define PR_2_FEATURE_LARGE_FILES 0x020033 /* Filesystem contains large files, but has no such flag in sb */
  338. #define PR_2_HTREE_NOTREF 0x020034 /* Node in HTREE directory not referenced */
  339. #define PR_2_HTREE_DUPREF 0x020035 /* Node in HTREE directory referenced twice */
  340. #define PR_2_HTREE_MIN_HASH 0x020036 /* Node in HTREE directory has bad min hash */
  341. #define PR_2_HTREE_MAX_HASH 0x020037 /* Node in HTREE directory has bad max hash */
  342. #define PR_2_HTREE_CLEAR 0x020038 /* Clear invalid HTREE directory */
  343. #define PR_2_HTREE_BADBLK 0x02003A /* Bad block in htree interior node */
  344. #define PR_2_ADJ_EA_REFCOUNT 0x02003B /* Error adjusting EA refcount */
  345. #define PR_2_HTREE_BAD_ROOT 0x02003C /* Invalid HTREE root node */
  346. #define PR_2_HTREE_BAD_LIMIT 0x02003D /* Invalid HTREE limit */
  347. #define PR_2_HTREE_BAD_COUNT 0x02003E /* Invalid HTREE count */
  348. #define PR_2_HTREE_HASH_ORDER 0x02003F /* HTREE interior node has out-of-order hashes in table */
  349. #define PR_2_HTREE_BAD_DEPTH 0x020040 /* Node in HTREE directory has bad depth */
  350. #define PR_2_DUPLICATE_DIRENT 0x020041 /* Duplicate directory entry found */
  351. #define PR_2_NON_UNIQUE_FILE 0x020042 /* Non-unique filename found */
  352. #define PR_2_REPORT_DUP_DIRENT 0x020043 /* Duplicate directory entry found */
  353. /*
  354. * Pass 3 errors
  355. */
  356. #define PR_3_PASS_HEADER 0x030000 /* Pass 3: Checking directory connectivity */
  357. #define PR_3_NO_ROOT_INODE 0x030001 /* Root inode not allocated */
  358. #define PR_3_EXPAND_LF_DIR 0x030002 /* No room in lost+found */
  359. #define PR_3_UNCONNECTED_DIR 0x030003 /* Unconnected directory inode */
  360. #define PR_3_NO_LF_DIR 0x030004 /* /lost+found not found */
  361. #define PR_3_BAD_DOT_DOT 0x030005 /* .. entry is incorrect */
  362. #define PR_3_NO_LPF 0x030006 /* Bad or non-existent /lost+found. Cannot reconnect */
  363. #define PR_3_CANT_EXPAND_LPF 0x030007 /* Could not expand /lost+found */
  364. #define PR_3_CANT_RECONNECT 0x030008 /* Could not reconnect inode */
  365. #define PR_3_ERR_FIND_LPF 0x030009 /* Error while trying to find /lost+found */
  366. #define PR_3_ERR_LPF_NEW_BLOCK 0x03000A /* Error in ext2fs_new_block while creating /lost+found */
  367. #define PR_3_ERR_LPF_NEW_INODE 0x03000B /* Error in ext2fs_new_inode while creating /lost+found */
  368. #define PR_3_ERR_LPF_NEW_DIR_BLOCK 0x03000C /* Error in ext2fs_new_dir_block while creating /lost+found */
  369. #define PR_3_ERR_LPF_WRITE_BLOCK 0x03000D /* Error while writing directory block for /lost+found */
  370. #define PR_3_ADJUST_INODE 0x03000E /* Error while adjusting inode count */
  371. #define PR_3_FIX_PARENT_ERR 0x03000F /* Couldn't fix parent directory -- error */
  372. #define PR_3_FIX_PARENT_NOFIND 0x030010 /* Couldn't fix parent directory -- couldn't find it */
  373. #define PR_3_ALLOCATE_IBITMAP_ERROR 0x030011 /* Error allocating inode bitmap */
  374. #define PR_3_CREATE_ROOT_ERROR 0x030012 /* Error creating root directory */
  375. #define PR_3_CREATE_LPF_ERROR 0x030013 /* Error creating lost and found directory */
  376. #define PR_3_ROOT_NOT_DIR_ABORT 0x030014 /* Root inode is not directory; aborting */
  377. #define PR_3_NO_ROOT_INODE_ABORT 0x030015 /* Cannot proceed without a root inode. */
  378. #define PR_3_NO_DIRINFO 0x030016 /* Internal error: couldn't find dir_info */
  379. #define PR_3_LPF_NOTDIR 0x030017 /* Lost+found is not a directory */
  380. /*
  381. * Pass 3a --- rehashing diretories
  382. */
  383. #define PR_3A_PASS_HEADER 0x031000 /* Pass 3a: Reindexing directories */
  384. #define PR_3A_OPTIMIZE_ITER 0x031001 /* Error iterating over directories */
  385. #define PR_3A_OPTIMIZE_DIR_ERR 0x031002 /* Error rehash directory */
  386. #define PR_3A_OPTIMIZE_DIR_HEADER 0x031003 /* Rehashing dir header */
  387. #define PR_3A_OPTIMIZE_DIR 0x031004 /* Rehashing directory %d */
  388. #define PR_3A_OPTIMIZE_DIR_END 0x031005 /* Rehashing dir end */
  389. /*
  390. * Pass 4 errors
  391. */
  392. #define PR_4_PASS_HEADER 0x040000 /* Pass 4: Checking reference counts */
  393. #define PR_4_ZERO_LEN_INODE 0x040001 /* Unattached zero-length inode */
  394. #define PR_4_UNATTACHED_INODE 0x040002 /* Unattached inode */
  395. #define PR_4_BAD_REF_COUNT 0x040003 /* Inode ref count wrong */
  396. #define PR_4_INCONSISTENT_COUNT 0x040004 /* Inconsistent inode count information cached */
  397. /*
  398. * Pass 5 errors
  399. */
  400. #define PR_5_PASS_HEADER 0x050000 /* Pass 5: Checking group summary information */
  401. #define PR_5_INODE_BMAP_PADDING 0x050001 /* Padding at end of inode bitmap is not set. */
  402. #define PR_5_BLOCK_BMAP_PADDING 0x050002 /* Padding at end of block bitmap is not set. */
  403. #define PR_5_BLOCK_BITMAP_HEADER 0x050003 /* Block bitmap differences header */
  404. #define PR_5_BLOCK_UNUSED 0x050004 /* Block not used, but marked in bitmap */
  405. #define PR_5_BLOCK_USED 0x050005 /* Block used, but not marked used in bitmap */
  406. #define PR_5_BLOCK_BITMAP_END 0x050006 /* Block bitmap differences end */
  407. #define PR_5_INODE_BITMAP_HEADER 0x050007 /* Inode bitmap differences header */
  408. #define PR_5_INODE_UNUSED 0x050008 /* Inode not used, but marked in bitmap */
  409. #define PR_5_INODE_USED 0x050009 /* Inode used, but not marked used in bitmap */
  410. #define PR_5_INODE_BITMAP_END 0x05000A /* Inode bitmap differences end */
  411. #define PR_5_FREE_INODE_COUNT_GROUP 0x05000B /* Free inodes count for group wrong */
  412. #define PR_5_FREE_DIR_COUNT_GROUP 0x05000C /* Directories count for group wrong */
  413. #define PR_5_FREE_INODE_COUNT 0x05000D /* Free inodes count wrong */
  414. #define PR_5_FREE_BLOCK_COUNT_GROUP 0x05000E /* Free blocks count for group wrong */
  415. #define PR_5_FREE_BLOCK_COUNT 0x05000F /* Free blocks count wrong */
  416. #define PR_5_BMAP_ENDPOINTS 0x050010 /* Programming error: bitmap endpoints don't match */
  417. #define PR_5_FUDGE_BITMAP_ERROR 0x050011 /* Internal error: fudging end of bitmap */
  418. #define PR_5_COPY_IBITMAP_ERROR 0x050012 /* Error copying in replacement inode bitmap */
  419. #define PR_5_COPY_BBITMAP_ERROR 0x050013 /* Error copying in replacement block bitmap */
  420. #define PR_5_BLOCK_RANGE_UNUSED 0x050014 /* Block range not used, but marked in bitmap */
  421. #define PR_5_BLOCK_RANGE_USED 0x050015 /* Block range used, but not marked used in bitmap */
  422. #define PR_5_INODE_RANGE_UNUSED 0x050016 /* Inode range not used, but marked in bitmap */
  423. #define PR_5_INODE_RANGE_USED 0x050017 /* Inode rangeused, but not marked used in bitmap */
  424. /*
  425. * The directory information structure; stores directory information
  426. * collected in earlier passes, to avoid disk i/o in fetching the
  427. * directory information.
  428. */
  429. struct dir_info {
  430. ext2_ino_t ino; /* Inode number */
  431. ext2_ino_t dotdot; /* Parent according to '..' */
  432. ext2_ino_t parent; /* Parent according to treewalk */
  433. };
  434. /*
  435. * The indexed directory information structure; stores information for
  436. * directories which contain a hash tree index.
  437. */
  438. struct dx_dir_info {
  439. ext2_ino_t ino; /* Inode number */
  440. int numblocks; /* number of blocks */
  441. int hashversion;
  442. short depth; /* depth of tree */
  443. struct dx_dirblock_info *dx_block; /* Array of size numblocks */
  444. };
  445. /*
  446. * Define the extended attribute refcount structure
  447. */
  448. typedef struct ea_refcount *ext2_refcount_t;
  449. struct e2fsck_struct {
  450. ext2_filsys fs;
  451. const char *program_name;
  452. char *filesystem_name;
  453. char *device_name;
  454. char *io_options;
  455. int flags; /* E2fsck internal flags */
  456. int options;
  457. blk_t use_superblock; /* sb requested by user */
  458. blk_t superblock; /* sb used to open fs */
  459. int blocksize; /* blocksize */
  460. blk_t num_blocks; /* Total number of blocks */
  461. int mount_flags;
  462. blkid_cache blkid; /* blkid cache */
  463. jmp_buf abort_loc;
  464. unsigned long abort_code;
  465. int (*progress)(e2fsck_t ctx, int pass, unsigned long cur,
  466. unsigned long max);
  467. ext2fs_inode_bitmap inode_used_map; /* Inodes which are in use */
  468. ext2fs_inode_bitmap inode_bad_map; /* Inodes which are bad somehow */
  469. ext2fs_inode_bitmap inode_dir_map; /* Inodes which are directories */
  470. ext2fs_inode_bitmap inode_imagic_map; /* AFS inodes */
  471. ext2fs_inode_bitmap inode_reg_map; /* Inodes which are regular files*/
  472. ext2fs_block_bitmap block_found_map; /* Blocks which are in use */
  473. ext2fs_block_bitmap block_dup_map; /* Blks referenced more than once */
  474. ext2fs_block_bitmap block_ea_map; /* Blocks which are used by EA's */
  475. /*
  476. * Inode count arrays
  477. */
  478. ext2_icount_t inode_count;
  479. ext2_icount_t inode_link_info;
  480. ext2_refcount_t refcount;
  481. ext2_refcount_t refcount_extra;
  482. /*
  483. * Array of flags indicating whether an inode bitmap, block
  484. * bitmap, or inode table is invalid
  485. */
  486. int *invalid_inode_bitmap_flag;
  487. int *invalid_block_bitmap_flag;
  488. int *invalid_inode_table_flag;
  489. int invalid_bitmaps; /* There are invalid bitmaps/itable */
  490. /*
  491. * Block buffer
  492. */
  493. char *block_buf;
  494. /*
  495. * For pass1_check_directory and pass1_get_blocks
  496. */
  497. ext2_ino_t stashed_ino;
  498. struct ext2_inode *stashed_inode;
  499. /*
  500. * Location of the lost and found directory
  501. */
  502. ext2_ino_t lost_and_found;
  503. int bad_lost_and_found;
  504. /*
  505. * Directory information
  506. */
  507. int dir_info_count;
  508. int dir_info_size;
  509. struct dir_info *dir_info;
  510. /*
  511. * Indexed directory information
  512. */
  513. int dx_dir_info_count;
  514. int dx_dir_info_size;
  515. struct dx_dir_info *dx_dir_info;
  516. /*
  517. * Directories to hash
  518. */
  519. ext2_u32_list dirs_to_hash;
  520. /*
  521. * Tuning parameters
  522. */
  523. int process_inode_size;
  524. int inode_buffer_blocks;
  525. /*
  526. * ext3 journal support
  527. */
  528. io_channel journal_io;
  529. char *journal_name;
  530. /*
  531. * How we display the progress update (for unix)
  532. */
  533. int progress_fd;
  534. int progress_pos;
  535. int progress_last_percent;
  536. unsigned int progress_last_time;
  537. int interactive; /* Are we connected directly to a tty? */
  538. char start_meta[2], stop_meta[2];
  539. /* File counts */
  540. int fs_directory_count;
  541. int fs_regular_count;
  542. int fs_blockdev_count;
  543. int fs_chardev_count;
  544. int fs_links_count;
  545. int fs_symlinks_count;
  546. int fs_fast_symlinks_count;
  547. int fs_fifo_count;
  548. int fs_total_count;
  549. int fs_sockets_count;
  550. int fs_ind_count;
  551. int fs_dind_count;
  552. int fs_tind_count;
  553. int fs_fragmented;
  554. int large_files;
  555. int fs_ext_attr_inodes;
  556. int fs_ext_attr_blocks;
  557. int ext_attr_ver;
  558. /*
  559. * For the use of callers of the e2fsck functions; not used by
  560. * e2fsck functions themselves.
  561. */
  562. void *priv_data;
  563. };
  564. #define tid_gt(x, y) ((x - y) > 0)
  565. static inline int tid_geq(tid_t x, tid_t y)
  566. {
  567. int difference = (x - y);
  568. return (difference >= 0);
  569. }