123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647 |
- /* vi: set sw=4 ts=4: */
- /*
- * SuS3 compliant sort implementation for busybox
- *
- * Copyright (C) 2004 by Rob Landley <rob@landley.net>
- *
- * MAINTAINER: Rob Landley <rob@landley.net>
- *
- * Licensed under GPLv2 or later, see file LICENSE in this source tree.
- *
- * See SuS3 sort standard at:
- * http://www.opengroup.org/onlinepubs/007904975/utilities/sort.html
- */
- //config:config SORT
- //config: bool "sort (7.7 kb)"
- //config: default y
- //config: help
- //config: sort is used to sort lines of text in specified files.
- //config:
- //config:config FEATURE_SORT_BIG
- //config: bool "Full SuSv3 compliant sort (support -ktcbdfiogM)"
- //config: default y
- //config: depends on SORT
- //config: help
- //config: Without this, sort only supports -rusz, and an integer version
- //config: of -n. Selecting this adds sort keys, floating point support, and
- //config: more. This adds a little over 3k to a nonstatic build on x86.
- //config:
- //config: The SuSv3 sort standard is available at:
- //config: http://www.opengroup.org/onlinepubs/007904975/utilities/sort.html
- //config:
- //config:config FEATURE_SORT_OPTIMIZE_MEMORY
- //config: bool "Use less memory (but might be slower)"
- //config: default n # defaults to N since we are size-paranoid tribe
- //config: depends on SORT
- //config: help
- //config: Attempt to use less memory (by storing only one copy
- //config: of duplicated lines, and such). Useful if you work on huge files.
- //applet:IF_SORT(APPLET_NOEXEC(sort, sort, BB_DIR_USR_BIN, BB_SUID_DROP, sort))
- //kbuild:lib-$(CONFIG_SORT) += sort.o
- //usage:#define sort_trivial_usage
- //usage: "[-nru"
- //usage: IF_FEATURE_SORT_BIG("gMcszbdfiokt] [-o FILE] [-k start[.offset][opts][,end[.offset][opts]] [-t CHAR")
- //usage: "] [FILE]..."
- //usage:#define sort_full_usage "\n\n"
- //usage: "Sort lines of text\n"
- //usage: IF_FEATURE_SORT_BIG(
- //usage: "\n -o FILE Output to FILE"
- //usage: "\n -c Check whether input is sorted"
- //usage: "\n -b Ignore leading blanks"
- //usage: "\n -f Ignore case"
- //usage: "\n -i Ignore unprintable characters"
- //usage: "\n -d Dictionary order (blank or alphanumeric only)"
- //usage: )
- //-h, --human-numeric-sort: compare human readable numbers (e.g., 2K 1G)
- //usage: "\n -n Sort numbers"
- //usage: IF_FEATURE_SORT_BIG(
- //usage: "\n -g General numerical sort"
- //usage: "\n -M Sort month"
- //usage: "\n -V Sort version"
- //usage: "\n -t CHAR Field separator"
- //usage: "\n -k N[,M] Sort by Nth field"
- //usage: )
- //usage: "\n -r Reverse sort order"
- //usage: "\n -s Stable (don't sort ties alphabetically)"
- //usage: "\n -u Suppress duplicate lines"
- //usage: "\n -z Lines are terminated by NUL, not newline"
- ///////: "\n -m Ignored for GNU compatibility"
- ///////: "\n -S BUFSZ Ignored for GNU compatibility"
- ///////: "\n -T TMPDIR Ignored for GNU compatibility"
- //usage:
- //usage:#define sort_example_usage
- //usage: "$ echo -e \"e\\nf\\nb\\nd\\nc\\na\" | sort\n"
- //usage: "a\n"
- //usage: "b\n"
- //usage: "c\n"
- //usage: "d\n"
- //usage: "e\n"
- //usage: "f\n"
- //usage: IF_FEATURE_SORT_BIG(
- //usage: "$ echo -e \"c 3\\nb 2\\nd 2\" | $SORT -k 2,2n -k 1,1r\n"
- //usage: "d 2\n"
- //usage: "b 2\n"
- //usage: "c 3\n"
- //usage: )
- //usage: ""
- #include "libbb.h"
- /* These are sort types */
- enum {
- FLAG_n = 1 << 0, /* Numeric sort */
- FLAG_g = 1 << 1, /* Sort using strtod() */
- FLAG_M = 1 << 2, /* Sort date */
- FLAG_V = 1 << 3, /* Sort version */
- /* ucsz apply to root level only, not keys. b at root level implies bb */
- FLAG_u = 1 << 4, /* Unique */
- FLAG_c = 1 << 5, /* Check: no output, exit(!ordered) */
- FLAG_s = 1 << 6, /* Stable sort, no ascii fallback at end */
- FLAG_z = 1 << 7, /* Input and output is NUL terminated, not \n */
- /* These can be applied to search keys, the previous four can't */
- FLAG_b = 1 << 8, /* Ignore leading blanks */
- FLAG_r = 1 << 9, /* Reverse */
- FLAG_d = 1 << 10, /* Ignore !(isalnum()|isspace()) */
- FLAG_f = 1 << 11, /* Force uppercase */
- FLAG_i = 1 << 12, /* Ignore !isprint() */
- FLAG_m = 1 << 13, /* ignored: merge already sorted files; do not sort */
- FLAG_S = 1 << 14, /* ignored: -S, --buffer-size=SIZE */
- FLAG_T = 1 << 15, /* ignored: -T, --temporary-directory=DIR */
- FLAG_o = 1 << 16,
- FLAG_k = 1 << 17,
- FLAG_t = 1 << 18,
- FLAG_bb = 0x80000000, /* Ignore trailing blanks */
- FLAG_no_tie_break = 0x40000000,
- };
- static const char sort_opt_str[] ALIGN1 = "^"
- "ngMVucszbrdfimS:T:o:k:*t:"
- "\0" "o--o:t--t"/*-t, -o: at most one of each*/;
- /*
- * OPT_STR must not be string literal, needs to have stable address:
- * code uses "strchr(OPT_STR,c) - OPT_STR" idiom.
- */
- #define OPT_STR (sort_opt_str + 1)
- #if ENABLE_FEATURE_SORT_BIG
- static char key_separator;
- static struct sort_key {
- struct sort_key *next_key; /* linked list */
- unsigned range[4]; /* start word, start char, end word, end char */
- unsigned flags;
- } *key_list;
- /* This is a NOEXEC applet. Be very careful! */
- static char *get_key(char *str, struct sort_key *key, int flags)
- {
- int start = start; /* for compiler */
- int end;
- int len, j;
- unsigned i;
- /* Special case whole string, so we don't have to make a copy */
- if (key->range[0] == 1 && !key->range[1] && !key->range[2] && !key->range[3]
- && !(flags & (FLAG_b | FLAG_d | FLAG_f | FLAG_i | FLAG_bb))
- ) {
- return str;
- }
- /* Find start of key on first pass, end on second pass */
- len = strlen(str);
- for (j = 0; j < 2; j++) {
- if (!key->range[2*j])
- end = len;
- /* Loop through fields */
- else {
- unsigned char ch = 0;
- end = 0;
- for (i = 1; i < key->range[2*j] + j; i++) {
- if (key_separator) {
- /* Skip body of key and separator */
- while ((ch = str[end]) != '\0') {
- end++;
- if (ch == key_separator)
- break;
- }
- } else {
- /* Skip leading blanks */
- while (isspace(str[end]))
- end++;
- /* Skip body of key */
- while (str[end] != '\0') {
- if (isspace(str[end]))
- break;
- end++;
- }
- }
- }
- /* Remove last delim: "abc:def:" => "abc:def" */
- if (j && ch) {
- //if (str[end-1] != key_separator)
- // bb_error_msg(_and_die("BUG! "
- // "str[start:%d,end:%d]:'%.*s'",
- // start, end, (int)(end-start), &str[start]);
- end--;
- }
- }
- if (!j) start = end;
- }
- /* Strip leading whitespace if necessary */
- if (flags & FLAG_b)
- /* not using skip_whitespace() for speed */
- while (isspace(str[start])) start++;
- /* Strip trailing whitespace if necessary */
- if (flags & FLAG_bb)
- while (end > start && isspace(str[end-1])) end--;
- /* -kSTART,N.ENDCHAR: honor ENDCHAR (1-based) */
- if (key->range[3]) {
- end = key->range[3];
- if (end > len) end = len;
- }
- /* -kN.STARTCHAR[,...]: honor STARTCHAR (1-based) */
- if (key->range[1]) {
- start += key->range[1] - 1;
- if (start > len) start = len;
- }
- /* Make the copy */
- if (end < start)
- end = start;
- str = xstrndup(str+start, end-start);
- /* Handle -d */
- if (flags & FLAG_d) {
- for (start = end = 0; str[end]; end++)
- if (isspace(str[end]) || isalnum(str[end]))
- str[start++] = str[end];
- str[start] = '\0';
- }
- /* Handle -i */
- if (flags & FLAG_i) {
- for (start = end = 0; str[end]; end++)
- if (isprint_asciionly(str[end]))
- str[start++] = str[end];
- str[start] = '\0';
- }
- /* Handle -f */
- if (flags & FLAG_f)
- for (i = 0; str[i]; i++)
- str[i] = toupper(str[i]);
- return str;
- }
- static struct sort_key *add_key(void)
- {
- struct sort_key **pkey = &key_list;
- while (*pkey)
- pkey = &((*pkey)->next_key);
- return *pkey = xzalloc(sizeof(struct sort_key));
- }
- #define GET_LINE(fp) \
- ((option_mask32 & FLAG_z) \
- ? bb_get_chunk_from_file(fp, NULL) \
- : xmalloc_fgetline(fp))
- #else
- #define GET_LINE(fp) xmalloc_fgetline(fp)
- #endif
- /* Iterate through keys list and perform comparisons */
- static int compare_keys(const void *xarg, const void *yarg)
- {
- int flags = option_mask32, retval = 0;
- char *x, *y;
- #if ENABLE_FEATURE_SORT_BIG
- struct sort_key *key;
- for (key = key_list; !retval && key; key = key->next_key) {
- flags = key->flags ? key->flags : option_mask32;
- /* Chop out and modify key chunks, handling -dfib */
- x = get_key(*(char **)xarg, key, flags);
- y = get_key(*(char **)yarg, key, flags);
- #else
- /* This curly bracket serves no purpose but to match the nesting
- * level of the for () loop we're not using */
- {
- x = *(char **)xarg;
- y = *(char **)yarg;
- #endif
- /* Perform actual comparison */
- switch (flags & (FLAG_n | FLAG_g | FLAG_M | FLAG_V)) {
- default:
- bb_simple_error_msg_and_die("unknown sort type");
- break;
- #if defined(HAVE_STRVERSCMP) && HAVE_STRVERSCMP == 1
- case FLAG_V:
- retval = strverscmp(x, y);
- break;
- #endif
- /* Ascii sort */
- case 0:
- #if ENABLE_LOCALE_SUPPORT
- retval = strcoll(x, y);
- #else
- retval = strcmp(x, y);
- #endif
- break;
- #if ENABLE_FEATURE_SORT_BIG
- case FLAG_g: {
- char *xx, *yy;
- double dx = strtod(x, &xx);
- double dy = strtod(y, &yy);
- /* not numbers < NaN < -infinity < numbers < +infinity) */
- if (x == xx)
- retval = (y == yy ? 0 : -1);
- else if (y == yy)
- retval = 1;
- /* Check for isnan */
- else if (dx != dx)
- retval = (dy != dy) ? 0 : -1;
- else if (dy != dy)
- retval = 1;
- /* Check for infinity. Could underflow, but it avoids libm. */
- else if (1.0 / dx == 0.0) {
- if (dx < 0)
- retval = (1.0 / dy == 0.0 && dy < 0) ? 0 : -1;
- else
- retval = (1.0 / dy == 0.0 && dy > 0) ? 0 : 1;
- } else if (1.0 / dy == 0.0)
- retval = (dy < 0) ? 1 : -1;
- else
- retval = (dx > dy) ? 1 : ((dx < dy) ? -1 : 0);
- break;
- }
- case FLAG_M: {
- struct tm thyme;
- int dx;
- char *xx, *yy;
- xx = strptime(x, "%b", &thyme);
- dx = thyme.tm_mon;
- yy = strptime(y, "%b", &thyme);
- if (!xx)
- retval = (!yy) ? 0 : -1;
- else if (!yy)
- retval = 1;
- else
- retval = dx - thyme.tm_mon;
- break;
- }
- /* Full floating point version of -n */
- case FLAG_n: {
- double dx = atof(x);
- double dy = atof(y);
- retval = (dx > dy) ? 1 : ((dx < dy) ? -1 : 0);
- break;
- }
- } /* switch */
- /* Free key copies. */
- if (x != *(char **)xarg) free(x);
- if (y != *(char **)yarg) free(y);
- /* if (retval) break; - done by for () anyway */
- #else
- /* Integer version of -n for tiny systems */
- case FLAG_n:
- retval = atoi(x) - atoi(y);
- break;
- } /* switch */
- #endif
- } /* for */
- if (retval == 0) {
- /* So far lines are "the same" */
- if (option_mask32 & FLAG_s) {
- /* "Stable sort": later line is "greater than",
- * IOW: do not allow qsort() to swap equal lines.
- */
- uint32_t *p32;
- uint32_t x32, y32;
- char *line;
- unsigned len;
- line = *(char**)xarg;
- len = (strlen(line) + 4) & (~3u);
- p32 = (void*)(line + len);
- x32 = *p32;
- line = *(char**)yarg;
- len = (strlen(line) + 4) & (~3u);
- p32 = (void*)(line + len);
- y32 = *p32;
- /* If x > y, 1, else -1 */
- retval = (x32 > y32) * 2 - 1;
- } else
- if (!(option_mask32 & FLAG_no_tie_break)) {
- /* fallback sort */
- flags = option_mask32;
- retval = strcmp(*(char **)xarg, *(char **)yarg);
- }
- }
- if (flags & FLAG_r)
- return -retval;
- return retval;
- }
- #if ENABLE_FEATURE_SORT_BIG
- static unsigned str2u(char **str)
- {
- unsigned long lu;
- if (!isdigit((*str)[0]))
- bb_simple_error_msg_and_die("bad field specification");
- lu = strtoul(*str, str, 10);
- if ((sizeof(long) > sizeof(int) && lu > INT_MAX) || !lu)
- bb_simple_error_msg_and_die("bad field specification");
- return lu;
- }
- #endif
- int sort_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
- int sort_main(int argc UNUSED_PARAM, char **argv)
- {
- char **lines;
- char *str_ignored, *str_o, *str_t;
- llist_t *lst_k = NULL;
- int i;
- int linecount;
- unsigned opts;
- #if ENABLE_FEATURE_SORT_OPTIMIZE_MEMORY
- bool can_drop_dups;
- size_t prev_len = 0;
- char *prev_line = (char*) "";
- /* Postpone optimizing if the input is small, < 16k lines:
- * even just free()ing duplicate lines takes time.
- */
- size_t count_to_optimize_dups = 0x3fff;
- #endif
- xfunc_error_retval = 2;
- /* Parse command line options */
- opts = getopt32(argv,
- sort_opt_str,
- &str_ignored, &str_ignored, &str_o, &lst_k, &str_t
- );
- #if ENABLE_FEATURE_SORT_OPTIMIZE_MEMORY
- /* Can drop dups only if -u but no "complicating" options,
- * IOW: if we do a full line compares. Safe options:
- * -o FILE Output to FILE
- * -z Lines are terminated by NUL, not newline
- * -r Reverse sort order
- * -s Stable (don't sort ties alphabetically)
- * Not sure about these:
- * -b Ignore leading blanks
- * -f Ignore case
- * -i Ignore unprintable characters
- * -d Dictionary order (blank or alphanumeric only)
- * -n Sort numbers
- * -g General numerical sort
- * -M Sort month
- */
- can_drop_dups = ((opts & ~(FLAG_o|FLAG_z|FLAG_r|FLAG_s)) == FLAG_u);
- /* Stable sort needs every line to be uniquely allocated,
- * disable optimization to reuse strings:
- */
- if (opts & FLAG_s)
- count_to_optimize_dups = (size_t)-1L;
- #endif
- /* global b strips leading and trailing spaces */
- if (opts & FLAG_b)
- option_mask32 |= FLAG_bb;
- #if ENABLE_FEATURE_SORT_BIG
- if (opts & FLAG_t) {
- if (!str_t[0] || str_t[1])
- bb_simple_error_msg_and_die("bad -t parameter");
- key_separator = str_t[0];
- }
- /* note: below this point we use option_mask32, not opts,
- * since that reduces register pressure and makes code smaller */
- /* Parse sort key */
- while (lst_k) {
- enum {
- FLAG_allowed_for_k =
- FLAG_n | /* Numeric sort */
- FLAG_g | /* Sort using strtod() */
- FLAG_M | /* Sort date */
- FLAG_b | /* Ignore leading blanks */
- FLAG_r | /* Reverse */
- FLAG_d | /* Ignore !(isalnum()|isspace()) */
- FLAG_f | /* Force uppercase */
- FLAG_i | /* Ignore !isprint() */
- 0
- };
- struct sort_key *key = add_key();
- char *str_k = llist_pop(&lst_k);
- i = 0; /* i==0 before comma, 1 after (-k3,6) */
- while (*str_k) {
- /* Start of range */
- /* Cannot use bb_strtou - suffix can be a letter */
- key->range[2*i] = str2u(&str_k);
- if (*str_k == '.') {
- str_k++;
- key->range[2*i+1] = str2u(&str_k);
- }
- while (*str_k) {
- int flag;
- const char *idx;
- if (*str_k == ',' && !i++) {
- str_k++;
- break;
- } /* no else needed: fall through to syntax error
- because comma isn't in OPT_STR */
- idx = strchr(OPT_STR, *str_k);
- if (!idx)
- bb_simple_error_msg_and_die("unknown key option");
- flag = 1 << (idx - OPT_STR);
- if (flag & ~FLAG_allowed_for_k)
- bb_simple_error_msg_and_die("unknown sort type");
- /* b after ',' means strip _trailing_ space */
- if (i && flag == FLAG_b)
- flag = FLAG_bb;
- key->flags |= flag;
- str_k++;
- }
- }
- }
- #endif
- /* Open input files and read data */
- argv += optind;
- if (!*argv)
- *--argv = (char*)"-";
- linecount = 0;
- lines = NULL;
- do {
- /* coreutils 6.9 compat: abort on first open error,
- * do not continue to next file: */
- FILE *fp = xfopen_stdin(*argv);
- for (;;) {
- char *line = GET_LINE(fp);
- if (!line)
- break;
- #if ENABLE_FEATURE_SORT_OPTIMIZE_MEMORY
- if (count_to_optimize_dups != 0)
- count_to_optimize_dups--;
- if (count_to_optimize_dups == 0) {
- size_t len;
- char *new_line;
- /* On kernel/linux/arch/ *.[ch] files,
- * this reduces memory usage by 6%.
- * yes | head -99999999 | sort
- * goes down from 1900Mb to 380 Mb.
- */
- len = strlen(line);
- if (len <= prev_len) {
- new_line = prev_line + (prev_len - len);
- if (strcmp(line, new_line) == 0) {
- /* it's a tail of the prev line */
- if (can_drop_dups && prev_len == len) {
- /* it's identical to prev line */
- free(line);
- continue;
- }
- free(line);
- line = new_line;
- /* continue using longer prev_line
- * for future tail tests.
- */
- goto skip;
- }
- }
- prev_len = len;
- prev_line = line;
- skip: ;
- }
- #else
- //TODO: lighter version which only drops total dups if can_drop_dups == true
- #endif
- lines = xrealloc_vector(lines, 6, linecount);
- lines[linecount++] = line;
- }
- fclose_if_not_stdin(fp);
- } while (*++argv);
- #if ENABLE_FEATURE_SORT_BIG
- /* If no key, perform alphabetic sort */
- if (!key_list)
- add_key()->range[0] = 1;
- /* Handle -c */
- if (option_mask32 & FLAG_c) {
- int j = (option_mask32 & FLAG_u) ? -1 : 0;
- for (i = 1; i < linecount; i++) {
- if (compare_keys(&lines[i-1], &lines[i]) > j) {
- fprintf(stderr, "Check line %u\n", i);
- return EXIT_FAILURE;
- }
- }
- return EXIT_SUCCESS;
- }
- #endif
- /* For stable sort, store original line position beyond terminating NUL */
- if (option_mask32 & FLAG_s) {
- for (i = 0; i < linecount; i++) {
- uint32_t *p32;
- char *line;
- unsigned len;
- line = lines[i];
- len = (strlen(line) + 4) & (~3u);
- lines[i] = line = xrealloc(line, len + 4);
- p32 = (void*)(line + len);
- *p32 = i;
- }
- /*option_mask32 |= FLAG_no_tie_break;*/
- /* ^^^redundant: if FLAG_s, compare_keys() does no tie break */
- }
- /* Perform the actual sort */
- qsort(lines, linecount, sizeof(lines[0]), compare_keys);
- /* Handle -u */
- if (option_mask32 & FLAG_u) {
- int j = 0;
- /* coreutils 6.3 drop lines for which only key is the same
- * -- disabling last-resort compare, or else compare_keys()
- * will be the same only for completely identical lines.
- */
- option_mask32 |= FLAG_no_tie_break;
- for (i = 1; i < linecount; i++) {
- if (compare_keys(&lines[j], &lines[i]) == 0)
- free(lines[i]);
- else
- lines[++j] = lines[i];
- }
- if (linecount)
- linecount = j+1;
- }
- /* Print it */
- #if ENABLE_FEATURE_SORT_BIG
- /* Open output file _after_ we read all input ones */
- if (option_mask32 & FLAG_o)
- xmove_fd(xopen(str_o, O_WRONLY|O_CREAT|O_TRUNC), STDOUT_FILENO);
- #endif
- {
- int ch = (option_mask32 & FLAG_z) ? '\0' : '\n';
- for (i = 0; i < linecount; i++)
- printf("%s%c", lines[i], ch);
- }
- fflush_stdout_and_exit(EXIT_SUCCESS);
- }
|