123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623 |
- /* Mode: C;
- *
- * Mini ifenslave implementation for busybox
- * Copyright (C) 2005 by Marc Leeman <marc.leeman@barco.com>
- *
- * ifenslave.c: Configure network interfaces for parallel routing.
- *
- * This program controls the Linux implementation of running multiple
- * network interfaces in parallel.
- *
- * Author: Donald Becker <becker@cesdis.gsfc.nasa.gov>
- * Copyright 1994-1996 Donald Becker
- *
- * This program is free software; you can redistribute it
- * and/or modify it under the terms of the GNU General Public
- * License as published by the Free Software Foundation.
- *
- * The author may be reached as becker@CESDIS.gsfc.nasa.gov, or C/O
- * Center of Excellence in Space Data and Information Sciences
- * Code 930.5, Goddard Space Flight Center, Greenbelt MD 20771
- *
- * Changes :
- * - 2000/10/02 Willy Tarreau <willy at meta-x.org> :
- * - few fixes. Master's MAC address is now correctly taken from
- * the first device when not previously set ;
- * - detach support : call BOND_RELEASE to detach an enslaved interface.
- * - give a mini-howto from command-line help : # ifenslave -h
- *
- * - 2001/02/16 Chad N. Tindel <ctindel at ieee dot org> :
- * - Master is now brought down before setting the MAC address. In
- * the 2.4 kernel you can't change the MAC address while the device is
- * up because you get EBUSY.
- *
- * - 2001/09/13 Takao Indoh <indou dot takao at jp dot fujitsu dot com>
- * - Added the ability to change the active interface on a mode 1 bond
- * at runtime.
- *
- * - 2001/10/23 Chad N. Tindel <ctindel at ieee dot org> :
- * - No longer set the MAC address of the master. The bond device will
- * take care of this itself
- * - Try the SIOC*** versions of the bonding ioctls before using the
- * old versions
- * - 2002/02/18 Erik Habbinga <erik_habbinga @ hp dot com> :
- * - ifr2.ifr_flags was not initialized in the hwaddr_notset case,
- * SIOCGIFFLAGS now called before hwaddr_notset test
- *
- * - 2002/10/31 Tony Cureington <tony.cureington * hp_com> :
- * - If the master does not have a hardware address when the first slave
- * is enslaved, the master is assigned the hardware address of that
- * slave - there is a comment in bonding.c stating "ifenslave takes
- * care of this now." This corrects the problem of slaves having
- * different hardware addresses in active-backup mode when
- * multiple interfaces are specified on a single ifenslave command
- * (ifenslave bond0 eth0 eth1).
- *
- * - 2003/03/18 - Tsippy Mendelson <tsippy.mendelson at intel dot com> and
- * Shmulik Hen <shmulik.hen at intel dot com>
- * - Moved setting the slave's mac address and opening it, from
- * the application to the driver. This enables support of modes
- * that need to use the unique mac address of each slave.
- * The driver also takes care of closing the slave and restoring its
- * original mac address upon release.
- * In addition, block possibility of enslaving before the master is up.
- * This prevents putting the system in an undefined state.
- *
- * - 2003/05/01 - Amir Noam <amir.noam at intel dot com>
- * - Added ABI version control to restore compatibility between
- * new/old ifenslave and new/old bonding.
- * - Prevent adding an adapter that is already a slave.
- * Fixes the problem of stalling the transmission and leaving
- * the slave in a down state.
- *
- * - 2003/05/01 - Shmulik Hen <shmulik.hen at intel dot com>
- * - Prevent enslaving if the bond device is down.
- * Fixes the problem of leaving the system in unstable state and
- * halting when trying to remove the module.
- * - Close socket on all abnormal exists.
- * - Add versioning scheme that follows that of the bonding driver.
- * current version is 1.0.0 as a base line.
- *
- * - 2003/05/22 - Jay Vosburgh <fubar at us dot ibm dot com>
- * - ifenslave -c was broken; it's now fixed
- * - Fixed problem with routes vanishing from master during enslave
- * processing.
- *
- * - 2003/05/27 - Amir Noam <amir.noam at intel dot com>
- * - Fix backward compatibility issues:
- * For drivers not using ABI versions, slave was set down while
- * it should be left up before enslaving.
- * Also, master was not set down and the default set_mac_address()
- * would fail and generate an error message in the system log.
- * - For opt_c: slave should not be set to the master's setting
- * while it is running. It was already set during enslave. To
- * simplify things, it is now handeled separately.
- *
- * - 2003/12/01 - Shmulik Hen <shmulik.hen at intel dot com>
- * - Code cleanup and style changes
- * set version to 1.1.0
- */
- //config:config IFENSLAVE
- //config: bool "ifenslave (13 kb)"
- //config: default y
- //config: help
- //config: Userspace application to bind several interfaces
- //config: to a logical interface (use with kernel bonding driver).
- //applet:IF_IFENSLAVE(APPLET_NOEXEC(ifenslave, ifenslave, BB_DIR_SBIN, BB_SUID_DROP, ifenslave))
- //kbuild:lib-$(CONFIG_IFENSLAVE) += ifenslave.o interface.o
- //usage:#define ifenslave_trivial_usage
- //usage: "[-cdf] MASTER_IFACE SLAVE_IFACE..."
- //usage:#define ifenslave_full_usage "\n\n"
- //usage: "Configure network interfaces for parallel routing\n"
- //usage: "\n -c Change active slave"
- //usage: "\n -d Remove slave interface from bonding device"
- //usage: "\n -f Force, even if interface is not Ethernet"
- /* //usage: "\n -r Create a receive-only slave" */
- //usage:
- //usage:#define ifenslave_example_usage
- //usage: "To create a bond device, simply follow these three steps:\n"
- //usage: "- ensure that the required drivers are properly loaded:\n"
- //usage: " # modprobe bonding ; modprobe <3c59x|eepro100|pcnet32|tulip|...>\n"
- //usage: "- assign an IP address to the bond device:\n"
- //usage: " # ifconfig bond0 <addr> netmask <mask> broadcast <bcast>\n"
- //usage: "- attach all the interfaces you need to the bond device:\n"
- //usage: " # ifenslave bond0 eth0 eth1 eth2\n"
- //usage: " If bond0 didn't have a MAC address, it will take eth0's. Then, all\n"
- //usage: " interfaces attached AFTER this assignment will get the same MAC addr.\n\n"
- //usage: " To detach a dead interface without setting the bond device down:\n"
- //usage: " # ifenslave -d bond0 eth1\n\n"
- //usage: " To set the bond device down and automatically release all the slaves:\n"
- //usage: " # ifconfig bond0 down\n\n"
- //usage: " To change active slave:\n"
- //usage: " # ifenslave -c bond0 eth0\n"
- #include "libbb.h"
- /* #include <net/if.h> - no. linux/if_bonding.h pulls in linux/if.h */
- #include <linux/if.h>
- //#include <net/if_arp.h> - not needed?
- #include <linux/if_bonding.h>
- #include <linux/sockios.h>
- #include "fix_u32.h" /* hack, so we may include kernel's ethtool.h */
- #include <linux/ethtool.h>
- #ifndef BOND_ABI_VERSION
- # define BOND_ABI_VERSION 2
- #endif
- #ifndef IFNAMSIZ
- # define IFNAMSIZ 16
- #endif
- struct dev_data {
- struct ifreq mtu, flags, hwaddr;
- };
- enum { skfd = 3 }; /* AF_INET socket for ioctl() calls. */
- struct globals {
- unsigned abi_ver; /* userland - kernel ABI version */
- smallint hwaddr_set; /* Master's hwaddr is set */
- struct dev_data master;
- struct dev_data slave;
- };
- #define G (*ptr_to_globals)
- #define abi_ver (G.abi_ver )
- #define hwaddr_set (G.hwaddr_set)
- #define master (G.master )
- #define slave (G.slave )
- #define INIT_G() do { \
- SET_PTR_TO_GLOBALS(xzalloc(sizeof(G))); \
- } while (0)
- /* NOINLINEs are placed where it results in smaller code (gcc 4.3.1) */
- static int ioctl_on_skfd(unsigned request, struct ifreq *ifr)
- {
- return ioctl(skfd, request, ifr);
- }
- static int set_ifrname_and_do_ioctl(unsigned request, struct ifreq *ifr, const char *ifname)
- {
- strncpy_IFNAMSIZ(ifr->ifr_name, ifname);
- return ioctl_on_skfd(request, ifr);
- }
- static int get_if_settings(char *ifname, struct dev_data *dd)
- {
- int res;
- res = set_ifrname_and_do_ioctl(SIOCGIFMTU, &dd->mtu, ifname);
- res |= set_ifrname_and_do_ioctl(SIOCGIFFLAGS, &dd->flags, ifname);
- res |= set_ifrname_and_do_ioctl(SIOCGIFHWADDR, &dd->hwaddr, ifname);
- return res;
- }
- static int get_slave_flags(char *slave_ifname)
- {
- return set_ifrname_and_do_ioctl(SIOCGIFFLAGS, &slave.flags, slave_ifname);
- }
- static int set_hwaddr(char *ifname, struct sockaddr *hwaddr)
- {
- struct ifreq ifr;
- memcpy(&(ifr.ifr_hwaddr), hwaddr, sizeof(*hwaddr));
- return set_ifrname_and_do_ioctl(SIOCSIFHWADDR, &ifr, ifname);
- }
- static int set_mtu(char *ifname, int mtu)
- {
- struct ifreq ifr;
- ifr.ifr_mtu = mtu;
- return set_ifrname_and_do_ioctl(SIOCSIFMTU, &ifr, ifname);
- }
- static int set_if_flags(char *ifname, int flags)
- {
- struct ifreq ifr;
- ifr.ifr_flags = flags;
- return set_ifrname_and_do_ioctl(SIOCSIFFLAGS, &ifr, ifname);
- }
- static int set_if_up(char *ifname, int flags)
- {
- int res = set_if_flags(ifname, flags | IFF_UP);
- if (res)
- bb_perror_msg("%s: can't up", ifname);
- return res;
- }
- static int set_if_down(char *ifname, int flags)
- {
- int res = set_if_flags(ifname, flags & ~IFF_UP);
- if (res)
- bb_perror_msg("%s: can't down", ifname);
- return res;
- }
- static int clear_if_addr(char *ifname)
- {
- struct ifreq ifr;
- ifr.ifr_addr.sa_family = AF_INET;
- memset(ifr.ifr_addr.sa_data, 0, sizeof(ifr.ifr_addr.sa_data));
- return set_ifrname_and_do_ioctl(SIOCSIFADDR, &ifr, ifname);
- }
- static int set_if_addr(char *master_ifname, char *slave_ifname)
- {
- #if (SIOCGIFADDR | SIOCSIFADDR \
- | SIOCGIFDSTADDR | SIOCSIFDSTADDR \
- | SIOCGIFBRDADDR | SIOCSIFBRDADDR \
- | SIOCGIFNETMASK | SIOCSIFNETMASK) <= 0xffff
- #define INT uint16_t
- #else
- #define INT int
- #endif
- static const struct {
- INT g_ioctl;
- INT s_ioctl;
- } ifra[] = {
- { SIOCGIFADDR, SIOCSIFADDR },
- { SIOCGIFDSTADDR, SIOCSIFDSTADDR },
- { SIOCGIFBRDADDR, SIOCSIFBRDADDR },
- { SIOCGIFNETMASK, SIOCSIFNETMASK },
- };
- struct ifreq ifr;
- int res;
- unsigned i;
- for (i = 0; i < ARRAY_SIZE(ifra); i++) {
- res = set_ifrname_and_do_ioctl(ifra[i].g_ioctl, &ifr, master_ifname);
- if (res < 0) {
- ifr.ifr_addr.sa_family = AF_INET;
- memset(ifr.ifr_addr.sa_data, 0,
- sizeof(ifr.ifr_addr.sa_data));
- }
- res = set_ifrname_and_do_ioctl(ifra[i].s_ioctl, &ifr, slave_ifname);
- if (res < 0)
- return res;
- }
- return 0;
- }
- static void change_active(char *master_ifname, char *slave_ifname)
- {
- struct ifreq ifr;
- if (!(slave.flags.ifr_flags & IFF_SLAVE)) {
- bb_error_msg_and_die("%s is not a slave", slave_ifname);
- }
- strncpy_IFNAMSIZ(ifr.ifr_slave, slave_ifname);
- if (set_ifrname_and_do_ioctl(SIOCBONDCHANGEACTIVE, &ifr, master_ifname)
- && ioctl_on_skfd(BOND_CHANGE_ACTIVE_OLD, &ifr)
- ) {
- bb_perror_msg_and_die(
- "master %s, slave %s: can't "
- "change active",
- master_ifname, slave_ifname);
- }
- }
- static NOINLINE int enslave(char *master_ifname, char *slave_ifname)
- {
- struct ifreq ifr;
- int res;
- if (slave.flags.ifr_flags & IFF_SLAVE) {
- bb_error_msg(
- "%s is already a slave",
- slave_ifname);
- return 1;
- }
- res = set_if_down(slave_ifname, slave.flags.ifr_flags);
- if (res)
- return res;
- if (abi_ver < 2) {
- /* Older bonding versions would panic if the slave has no IP
- * address, so get the IP setting from the master.
- */
- res = set_if_addr(master_ifname, slave_ifname);
- if (res) {
- bb_perror_msg("%s: can't set address", slave_ifname);
- return res;
- }
- } else {
- res = clear_if_addr(slave_ifname);
- if (res) {
- bb_perror_msg("%s: can't clear address", slave_ifname);
- return res;
- }
- }
- if (master.mtu.ifr_mtu != slave.mtu.ifr_mtu) {
- res = set_mtu(slave_ifname, master.mtu.ifr_mtu);
- if (res) {
- bb_perror_msg("%s: can't set MTU", slave_ifname);
- return res;
- }
- }
- if (hwaddr_set) {
- /* Master already has an hwaddr
- * so set it's hwaddr to the slave
- */
- if (abi_ver < 1) {
- /* The driver is using an old ABI, so
- * the application sets the slave's
- * hwaddr
- */
- if (set_hwaddr(slave_ifname, &(master.hwaddr.ifr_hwaddr))) {
- bb_perror_msg("%s: can't set hw address",
- slave_ifname);
- goto undo_mtu;
- }
- /* For old ABI the application needs to bring the
- * slave back up
- */
- if (set_if_up(slave_ifname, slave.flags.ifr_flags))
- goto undo_slave_mac;
- }
- /* The driver is using a new ABI,
- * so the driver takes care of setting
- * the slave's hwaddr and bringing
- * it up again
- */
- } else {
- /* No hwaddr for master yet, so
- * set the slave's hwaddr to it
- */
- if (abi_ver < 1) {
- /* For old ABI, the master needs to be
- * down before setting it's hwaddr
- */
- if (set_if_down(master_ifname, master.flags.ifr_flags))
- goto undo_mtu;
- }
- if (set_hwaddr(master_ifname, &(slave.hwaddr.ifr_hwaddr))) {
- bb_error_msg("%s: can't set hw address",
- master_ifname);
- goto undo_mtu;
- }
- if (abi_ver < 1) {
- /* For old ABI, bring the master
- * back up
- */
- if (set_if_up(master_ifname, master.flags.ifr_flags))
- goto undo_master_mac;
- }
- hwaddr_set = 1;
- }
- /* Do the real thing */
- strncpy_IFNAMSIZ(ifr.ifr_slave, slave_ifname);
- if (set_ifrname_and_do_ioctl(SIOCBONDENSLAVE, &ifr, master_ifname)
- && ioctl_on_skfd(BOND_ENSLAVE_OLD, &ifr)
- ) {
- goto undo_master_mac;
- }
- return 0;
- /* rollback (best effort) */
- undo_master_mac:
- set_hwaddr(master_ifname, &(master.hwaddr.ifr_hwaddr));
- hwaddr_set = 0;
- goto undo_mtu;
- undo_slave_mac:
- set_hwaddr(slave_ifname, &(slave.hwaddr.ifr_hwaddr));
- undo_mtu:
- set_mtu(slave_ifname, slave.mtu.ifr_mtu);
- return 1;
- }
- static int release(char *master_ifname, char *slave_ifname)
- {
- struct ifreq ifr;
- int res = 0;
- if (!(slave.flags.ifr_flags & IFF_SLAVE)) {
- bb_error_msg("%s is not a slave", slave_ifname);
- return 1;
- }
- strncpy_IFNAMSIZ(ifr.ifr_slave, slave_ifname);
- if (set_ifrname_and_do_ioctl(SIOCBONDRELEASE, &ifr, master_ifname) < 0
- && ioctl_on_skfd(BOND_RELEASE_OLD, &ifr) < 0
- ) {
- return 1;
- }
- if (abi_ver < 1) {
- /* The driver is using an old ABI, so we'll set the interface
- * down to avoid any conflicts due to same MAC/IP
- */
- res = set_if_down(slave_ifname, slave.flags.ifr_flags);
- }
- /* set to default mtu */
- set_mtu(slave_ifname, 1500);
- return res;
- }
- static NOINLINE void get_drv_info(char *master_ifname)
- {
- struct ifreq ifr;
- struct ethtool_drvinfo info;
- memset(&ifr, 0, sizeof(ifr));
- ifr.ifr_data = (caddr_t)&info;
- info.cmd = ETHTOOL_GDRVINFO;
- /* both fields are 32 bytes long (long enough) */
- strcpy(info.driver, "ifenslave");
- strcpy(info.fw_version, utoa(BOND_ABI_VERSION));
- if (set_ifrname_and_do_ioctl(SIOCETHTOOL, &ifr, master_ifname) < 0) {
- if (errno == EOPNOTSUPP)
- return;
- bb_perror_msg_and_die("%s: SIOCETHTOOL error", master_ifname);
- }
- abi_ver = bb_strtou(info.fw_version, NULL, 0);
- if (errno)
- bb_error_msg_and_die("%s: SIOCETHTOOL error", master_ifname);
- }
- int ifenslave_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
- int ifenslave_main(int argc UNUSED_PARAM, char **argv)
- {
- char *master_ifname, *slave_ifname;
- int rv;
- int res;
- unsigned opt;
- enum {
- OPT_c = (1 << 0),
- OPT_d = (1 << 1),
- OPT_f = (1 << 2),
- };
- INIT_G();
- opt = getopt32long(argv, "cdfa",
- "change-active\0" No_argument "c"
- "detach\0" No_argument "d"
- "force\0" No_argument "f"
- /* "all-interfaces\0" No_argument "a" */
- );
- argv += optind;
- if (opt & (opt-1)) /* Only one option can be given */
- bb_show_usage();
- master_ifname = *argv++;
- /* No interface names - show all interfaces. */
- if (!master_ifname) {
- display_interfaces(NULL);
- return EXIT_SUCCESS;
- }
- /* Open a basic socket */
- xmove_fd(xsocket(AF_INET, SOCK_DGRAM, 0), skfd);
- /* Exchange abi version with bonding module */
- get_drv_info(master_ifname);
- slave_ifname = *argv++;
- if (!slave_ifname) {
- if (opt & (OPT_d|OPT_c)) {
- /* --change or --detach, and no slaves given -
- * show all interfaces. */
- display_interfaces(slave_ifname /* == NULL */);
- return 2; /* why 2? */
- }
- /* A single arg means show the
- * configuration for this interface
- */
- display_interfaces(master_ifname);
- return EXIT_SUCCESS;
- }
- if (get_if_settings(master_ifname, &master)) {
- /* Probably a good reason not to go on */
- bb_perror_msg_and_die("%s: can't get settings", master_ifname);
- }
- /* Check if master is indeed a master;
- * if not then fail any operation
- */
- if (!(master.flags.ifr_flags & IFF_MASTER))
- bb_error_msg_and_die("%s is not a master", master_ifname);
- /* Check if master is up; if not then fail any operation */
- if (!(master.flags.ifr_flags & IFF_UP))
- bb_error_msg_and_die("%s is not up", master_ifname);
- #ifdef WHY_BOTHER
- /* Neither -c[hange] nor -d[etach] -> it's "enslave" then;
- * and -f[orce] is not there too. Check that it's ethernet. */
- if (!(opt & (OPT_d|OPT_c|OPT_f))) {
- /* The family '1' is ARPHRD_ETHER for ethernet. */
- if (master.hwaddr.ifr_hwaddr.sa_family != 1) {
- bb_error_msg_and_die(
- "%s is not ethernet-like (-f overrides)",
- master_ifname);
- }
- }
- #endif
- /* Accepts only one slave */
- if (opt & OPT_c) {
- /* Change active slave */
- if (get_slave_flags(slave_ifname)) {
- bb_perror_msg_and_die(
- "%s: can't get flags", slave_ifname);
- }
- change_active(master_ifname, slave_ifname);
- return EXIT_SUCCESS;
- }
- /* Accepts multiple slaves */
- res = 0;
- do {
- if (opt & OPT_d) {
- /* Detach a slave interface from the master */
- rv = get_slave_flags(slave_ifname);
- if (rv) {
- /* Can't work with this slave, */
- /* remember the error and skip it */
- bb_perror_msg(
- "skipping %s: can't get %s",
- slave_ifname, "flags");
- res = rv;
- continue;
- }
- rv = release(master_ifname, slave_ifname);
- if (rv) {
- bb_perror_msg("can't release %s from %s",
- slave_ifname, master_ifname);
- res = rv;
- }
- } else {
- /* Attach a slave interface to the master */
- rv = get_if_settings(slave_ifname, &slave);
- if (rv) {
- /* Can't work with this slave, */
- /* remember the error and skip it */
- bb_perror_msg(
- "skipping %s: can't get %s",
- slave_ifname, "settings");
- res = rv;
- continue;
- }
- rv = enslave(master_ifname, slave_ifname);
- if (rv) {
- bb_perror_msg("can't enslave %s to %s",
- slave_ifname, master_ifname);
- res = rv;
- }
- }
- } while ((slave_ifname = *argv++) != NULL);
- if (ENABLE_FEATURE_CLEAN_UP) {
- close(skfd);
- }
- return res;
- }
|