busybox/include/bb_e2fs_defs.h

/* vi: set sw=4 ts=4: */
/*
 *  linux/include/linux/ext2_fs.h
 *
 * Copyright (C) 1992, 1993, 1994, 1995
 * Remy Card (card@masi.ibp.fr)
 * Laboratoire MASI - Institut Blaise Pascal
 * Universite Pierre et Marie Curie (Paris VI)
 *
 * Copyright (C) 1991, 1992  Linus Torvalds
 */

#ifndef LINUX_EXT2_FS_H
#define LINUX_EXT2_FS_H 1

/*
 * Special inode numbers
 */
#define EXT2_BAD_INO		 1	/* Bad blocks inode */
#define EXT2_ROOT_INO		 2	/* Root inode */
#define EXT2_ACL_IDX_INO	 3	/* ACL inode */
#define EXT2_ACL_DATA_INO	 4	/* ACL inode */
#define EXT2_BOOT_LOADER_INO	 5	/* Boot loader inode */
#define EXT2_UNDEL_DIR_INO	 6	/* Undelete directory inode */
#define EXT2_RESIZE_INO		 7	/* Reserved group descriptors inode */
#define EXT2_JOURNAL_INO	 8	/* Journal inode */

/* First non-reserved inode for old ext2 filesystems */
#define EXT2_GOOD_OLD_FIRST_INO	11

/*
 * The second extended file system magic number
 */
#define EXT2_SUPER_MAGIC	0xEF53

/* Assume that user mode programs are passing in an ext2fs superblock, not
 * a kernel struct super_block.  This will allow us to call the feature-test
 * macros from user land. */
#define EXT2_SB(sb)	(sb)

/*
 * Maximal count of links to a file
 */
#define EXT2_LINK_MAX		32000

/*
 * Macro-instructions used to manage several block sizes
 */
#define EXT2_MIN_BLOCK_LOG_SIZE		10	/* 1024 */
#define EXT2_MAX_BLOCK_LOG_SIZE		16	/* 65536 */
#define EXT2_MIN_BLOCK_SIZE	(1 << EXT2_MIN_BLOCK_LOG_SIZE)
#define EXT2_MAX_BLOCK_SIZE	(1 << EXT2_MAX_BLOCK_LOG_SIZE)
#define EXT2_BLOCK_SIZE(s)	(EXT2_MIN_BLOCK_SIZE << (s)->s_log_block_size)
#define EXT2_BLOCK_SIZE_BITS(s)	((s)->s_log_block_size + 10)
#define EXT2_INODE_SIZE(s)	(((s)->s_rev_level == EXT2_GOOD_OLD_REV) ? \
				 EXT2_GOOD_OLD_INODE_SIZE : (s)->s_inode_size)
#define EXT2_FIRST_INO(s)	(((s)->s_rev_level == EXT2_GOOD_OLD_REV) ? \
				 EXT2_GOOD_OLD_FIRST_INO : (s)->s_first_ino)
#define EXT2_ADDR_PER_BLOCK(s)	(EXT2_BLOCK_SIZE(s) / sizeof(uint32_t))

/*
 * Macro-instructions used to manage fragments
 */
#define EXT2_MIN_FRAG_SIZE		EXT2_MIN_BLOCK_SIZE
#define EXT2_MAX_FRAG_SIZE		EXT2_MAX_BLOCK_SIZE
#define EXT2_MIN_FRAG_LOG_SIZE		EXT2_MIN_BLOCK_LOG_SIZE
#define EXT2_FRAG_SIZE(s)		(EXT2_MIN_FRAG_SIZE << (s)->s_log_frag_size)
#define EXT2_FRAGS_PER_BLOCK(s)		(EXT2_BLOCK_SIZE(s) / EXT2_FRAG_SIZE(s))

/*
 * ACL structures
 */
struct ext2_acl_header {	/* Header of Access Control Lists */
	uint32_t	aclh_size;
	uint32_t	aclh_file_count;
	uint32_t	aclh_acle_count;
	uint32_t	aclh_first_acle;
};

struct ext2_acl_entry {	/* Access Control List Entry */
	uint32_t	acle_size;
	uint16_t	acle_perms;	/* Access permissions */
	uint16_t	acle_type;	/* Type of entry */
	uint16_t	acle_tag;	/* User or group identity */
	uint16_t	acle_pad1;
	uint32_t	acle_next;	/* Pointer on next entry for the */
					/* same inode or on next free entry */
};

/*
 * Structure of a blocks group descriptor
 */
struct ext2_group_desc {
	uint32_t	bg_block_bitmap;	/* Blocks bitmap block */
	uint32_t	bg_inode_bitmap;	/* Inodes bitmap block */
	uint32_t	bg_inode_table;		/* Inodes table block */
	uint16_t	bg_free_blocks_count;	/* Free blocks count */
	uint16_t	bg_free_inodes_count;	/* Free inodes count */
	uint16_t	bg_used_dirs_count;	/* Directories count */
	uint16_t	bg_pad;
	uint32_t	bg_reserved[3];
};

/*
 * Data structures used by the directory indexing feature
 *
 * Note: all of the multibyte integer fields are little endian.
 */

/*
 * Note: dx_root_info is laid out so that if it should somehow get
 * overlaid by a dirent the two low bits of the hash version will be
 * zero.  Therefore, the hash version mod 4 should never be 0.
 * Sincerely, the paranoia department.
 */
struct ext2_dx_root_info {
	uint32_t	reserved_zero;
	uint8_t		hash_version; /* 0 now, 1 at release */
	uint8_t		info_length; /* 8 */
	uint8_t		indirect_levels;
	uint8_t		unused_flags;
};

#define EXT2_HASH_LEGACY	0
#define EXT2_HASH_HALF_MD4	1
#define EXT2_HASH_TEA		2

#define EXT2_HASH_FLAG_INCOMPAT	0x1

struct ext2_dx_entry {
	uint32_t hash;
	uint32_t block;
};

struct ext2_dx_countlimit {
	uint16_t limit;
	uint16_t count;
};


/*
 * Macro-instructions used to manage group descriptors
 */
#define EXT2_BLOCKS_PER_GROUP(s)	(EXT2_SB(s)->s_blocks_per_group)
#define EXT2_INODES_PER_GROUP(s)	(EXT2_SB(s)->s_inodes_per_group)
#define EXT2_INODES_PER_BLOCK(s)	(EXT2_BLOCK_SIZE(s)/EXT2_INODE_SIZE(s))
/* limits imposed by 16-bit value gd_free_{blocks,inode}_count */
#define EXT2_MAX_BLOCKS_PER_GROUP(s)	((1 << 16) - 8)
#define EXT2_MAX_INODES_PER_GROUP(s)	((1 << 16) - EXT2_INODES_PER_BLOCK(s))
#define EXT2_DESC_PER_BLOCK(s)		(EXT2_BLOCK_SIZE(s) / sizeof (struct ext2_group_desc))

/*
 * Constants relative to the data blocks
 */
#define EXT2_NDIR_BLOCKS		12
#define EXT2_IND_BLOCK			EXT2_NDIR_BLOCKS
#define EXT2_DIND_BLOCK			(EXT2_IND_BLOCK + 1)
#define EXT2_TIND_BLOCK			(EXT2_DIND_BLOCK + 1)
#define EXT2_N_BLOCKS			(EXT2_TIND_BLOCK + 1)

/*
 * Inode flags
 */
#define EXT2_SECRM_FL			0x00000001 /* Secure deletion */
#define EXT2_UNRM_FL			0x00000002 /* Undelete */
#define EXT2_COMPR_FL			0x00000004 /* Compress file */
#define EXT2_SYNC_FL			0x00000008 /* Synchronous updates */
#define EXT2_IMMUTABLE_FL		0x00000010 /* Immutable file */
#define EXT2_APPEND_FL			0x00000020 /* writes to file may only append */
#define EXT2_NODUMP_FL			0x00000040 /* do not dump file */
#define EXT2_NOATIME_FL			0x00000080 /* do not update atime */
/* Reserved for compression usage... */
#define EXT2_DIRTY_FL			0x00000100
#define EXT2_COMPRBLK_FL		0x00000200 /* One or more compressed clusters */
#define EXT2_NOCOMPR_FL			0x00000400 /* Access raw compressed data */
#define EXT2_ECOMPR_FL			0x00000800 /* Compression error */
/* End compression flags --- maybe not all used */
#define EXT2_BTREE_FL			0x00001000 /* btree format dir */
#define EXT2_INDEX_FL			0x00001000 /* hash-indexed directory */
#define EXT2_IMAGIC_FL			0x00002000
#define EXT3_JOURNAL_DATA_FL		0x00004000 /* file data should be journaled */
#define EXT2_NOTAIL_FL			0x00008000 /* file tail should not be merged */
#define EXT2_DIRSYNC_FL			0x00010000 /* Synchronous directory modifications */
#define EXT2_TOPDIR_FL			0x00020000 /* Top of directory hierarchies*/
#define EXT3_EXTENTS_FL			0x00080000 /* Inode uses extents */
#define EXT2_RESERVED_FL		0x80000000 /* reserved for ext2 lib */

#define EXT2_FL_USER_VISIBLE		0x0003DFFF /* User visible flags */
#define EXT2_FL_USER_MODIFIABLE		0x000080FF /* User modifiable flags */

/*
 * ioctl commands
 */
#define EXT2_IOC_GETFLAGS		_IOR('f', 1, long)
#define EXT2_IOC_SETFLAGS		_IOW('f', 2, long)
#define EXT2_IOC_GETVERSION		_IOR('v', 1, long)
#define EXT2_IOC_SETVERSION		_IOW('v', 2, long)

/*
 * Structure of an inode on the disk
 */
struct ext2_inode {
	uint16_t	i_mode;		/* File mode */
	uint16_t	i_uid;		/* Low 16 bits of Owner Uid */
	uint32_t	i_size;		/* Size in bytes */
	uint32_t	i_atime;	/* Access time */
	uint32_t	i_ctime;	/* Creation time */
	uint32_t	i_mtime;	/* Modification time */
	uint32_t	i_dtime;	/* Deletion Time */
	uint16_t	i_gid;		/* Low 16 bits of Group Id */
	uint16_t	i_links_count;	/* Links count */
	uint32_t	i_blocks;	/* Blocks count */
	uint32_t	i_flags;	/* File flags */
	union {
		struct {
			uint32_t  l_i_reserved1;
		} linux1;
		struct {
			uint32_t  h_i_translator;
		} hurd1;
		struct {
			uint32_t  m_i_reserved1;
		} masix1;
	} osd1;				/* OS dependent 1 */
	uint32_t	i_block[EXT2_N_BLOCKS];/* Pointers to blocks */
	uint32_t	i_generation;	/* File version (for NFS) */
	uint32_t	i_file_acl;	/* File ACL */
	uint32_t	i_dir_acl;	/* Directory ACL */
	uint32_t	i_faddr;	/* Fragment address */
	union {
		struct {
			uint8_t		l_i_frag;	/* Fragment number */
			uint8_t		l_i_fsize;	/* Fragment size */
			uint16_t	i_pad1;
			uint16_t	l_i_uid_high;	/* these 2 fields    */
			uint16_t	l_i_gid_high;	/* were reserved2[0] */
			uint32_t	l_i_reserved2;
		} linux2;
		struct {
			uint8_t		h_i_frag;	/* Fragment number */
			uint8_t		h_i_fsize;	/* Fragment size */
			uint16_t	h_i_mode_high;
			uint16_t	h_i_uid_high;
			uint16_t	h_i_gid_high;
			uint32_t	h_i_author;
		} hurd2;
		struct {
			uint8_t		m_i_frag;	/* Fragment number */
			uint8_t		m_i_fsize;	/* Fragment size */
			uint16_t	m_pad1;
			uint32_t	m_i_reserved2[2];
		} masix2;
	} osd2;				/* OS dependent 2 */
};

/*
 * Permanent part of an large inode on the disk
 */
struct ext2_inode_large {
	uint16_t	i_mode;		/* File mode */
	uint16_t	i_uid;		/* Low 16 bits of Owner Uid */
	uint32_t	i_size;		/* Size in bytes */
	uint32_t	i_atime;	/* Access time */
	uint32_t	i_ctime;	/* Creation time */
	uint32_t	i_mtime;	/* Modification time */
	uint32_t	i_dtime;	/* Deletion Time */
	uint16_t	i_gid;		/* Low 16 bits of Group Id */
	uint16_t	i_links_count;	/* Links count */
	uint32_t	i_blocks;	/* Blocks count */
	uint32_t	i_flags;	/* File flags */
	union {
		struct {
			uint32_t  l_i_reserved1;
		} linux1;
		struct {
			uint32_t  h_i_translator;
		} hurd1;
		struct {
			uint32_t  m_i_reserved1;
		} masix1;
	} osd1;				/* OS dependent 1 */
	uint32_t	i_block[EXT2_N_BLOCKS];/* Pointers to blocks */
	uint32_t	i_generation;	/* File version (for NFS) */
	uint32_t	i_file_acl;	/* File ACL */
	uint32_t	i_dir_acl;	/* Directory ACL */
	uint32_t	i_faddr;	/* Fragment address */
	union {
		struct {
			uint8_t		l_i_frag;	/* Fragment number */
			uint8_t		l_i_fsize;	/* Fragment size */
			uint16_t	i_pad1;
			uint16_t	l_i_uid_high;	/* these 2 fields    */
			uint16_t	l_i_gid_high;	/* were reserved2[0] */
			uint32_t	l_i_reserved2;
		} linux2;
		struct {
			uint8_t		h_i_frag;	/* Fragment number */
			uint8_t		h_i_fsize;	/* Fragment size */
			uint16_t	h_i_mode_high;
			uint16_t	h_i_uid_high;
			uint16_t	h_i_gid_high;
			uint32_t	h_i_author;
		} hurd2;
		struct {
			uint8_t		m_i_frag;	/* Fragment number */
			uint8_t		m_i_fsize;	/* Fragment size */
			uint16_t	m_pad1;
			uint32_t	m_i_reserved2[2];
		} masix2;
	} osd2;				/* OS dependent 2 */
	uint16_t	i_extra_isize;
	uint16_t	i_pad1;
};

#define i_size_high	i_dir_acl

/*
 * File system states
 */
#define EXT2_VALID_FS			0x0001	/* Unmounted cleanly */
#define EXT2_ERROR_FS			0x0002	/* Errors detected */

/*
 * Mount flags
 */
#define EXT2_MOUNT_CHECK		0x0001	/* Do mount-time checks */
#define EXT2_MOUNT_GRPID		0x0004	/* Create files with directory's group */
#define EXT2_MOUNT_DEBUG		0x0008	/* Some debugging messages */
#define EXT2_MOUNT_ERRORS_CONT		0x0010	/* Continue on errors */
#define EXT2_MOUNT_ERRORS_RO		0x0020	/* Remount fs ro on errors */
#define EXT2_MOUNT_ERRORS_PANIC		0x0040	/* Panic on errors */
#define EXT2_MOUNT_MINIX_DF		0x0080	/* Mimics the Minix statfs */
#define EXT2_MOUNT_NO_UID32		0x0200  /* Disable 32-bit UIDs */

#define clear_opt(o, opt)		o &= ~EXT2_MOUNT_##opt
#define set_opt(o, opt)			o |= EXT2_MOUNT_##opt
#define test_opt(sb, opt)		(EXT2_SB(sb)->s_mount_opt & \
					 EXT2_MOUNT_##opt)
/*
 * Maximal mount counts between two filesystem checks
 */
#define EXT2_DFL_MAX_MNT_COUNT		20	/* Allow 20 mounts */
#define EXT2_DFL_CHECKINTERVAL		0	/* Don't use interval check */

/*
 * Behaviour when detecting errors
 */
#define EXT2_ERRORS_CONTINUE		1	/* Continue execution */
#define EXT2_ERRORS_RO			2	/* Remount fs read-only */
#define EXT2_ERRORS_PANIC		3	/* Panic */
#define EXT2_ERRORS_DEFAULT		EXT2_ERRORS_CONTINUE

/*
 * Structure of the super block
 */
struct ext2_super_block {
	uint32_t	s_inodes_count;		/* Inodes count */
	uint32_t	s_blocks_count;		/* Blocks count */
	uint32_t	s_r_blocks_count;	/* Reserved blocks count */
	uint32_t	s_free_blocks_count;	/* Free blocks count */
	uint32_t	s_free_inodes_count;	/* Free inodes count */
	uint32_t	s_first_data_block;	/* First Data Block */
	uint32_t	s_log_block_size;	/* Block size */
	int32_t		s_log_frag_size;	/* Fragment size */
	uint32_t	s_blocks_per_group;	/* # Blocks per group */
	uint32_t	s_frags_per_group;	/* # Fragments per group */
	uint32_t	s_inodes_per_group;	/* # Inodes per group */
	uint32_t	s_mtime;		/* Mount time */
	uint32_t	s_wtime;		/* Write time */
	uint16_t	s_mnt_count;		/* Mount count */
	int16_t		s_max_mnt_count;	/* Maximal mount count */
	uint16_t	s_magic;		/* Magic signature */
	uint16_t	s_state;		/* File system state */
	uint16_t	s_errors;		/* Behaviour when detecting errors */
	uint16_t	s_minor_rev_level;	/* minor revision level */
	uint32_t	s_lastcheck;		/* time of last check */
	uint32_t	s_checkinterval;	/* max. time between checks */
	uint32_t	s_creator_os;		/* OS */
	uint32_t	s_rev_level;		/* Revision level */
	uint16_t	s_def_resuid;		/* Default uid for reserved blocks */
	uint16_t	s_def_resgid;		/* Default gid for reserved blocks */
	/*
	 * These fields are for EXT2_DYNAMIC_REV superblocks only.
	 *
	 * Note: the difference between the compatible feature set and
	 * the incompatible feature set is that if there is a bit set
	 * in the incompatible feature set that the kernel doesn't
	 * know about, it should refuse to mount the filesystem.
	 *
	 * e2fsck's requirements are more strict; if it doesn't know
	 * about a feature in either the compatible or incompatible
	 * feature set, it must abort and not try to meddle with
	 * things it doesn't understand...
	 */
	uint32_t	s_first_ino;		/* First non-reserved inode */
	uint16_t	s_inode_size;		/* size of inode structure */
	uint16_t	s_block_group_nr;	/* block group # of this superblock */
	uint32_t	s_feature_compat;	/* compatible feature set */
	uint32_t	s_feature_incompat;	/* incompatible feature set */
	uint32_t	s_feature_ro_compat;	/* readonly-compatible feature set */
	uint8_t		s_uuid[16];		/* 128-bit uuid for volume */
	char		s_volume_name[16];	/* volume name */
	char		s_last_mounted[64];	/* directory where last mounted */
	uint32_t	s_algorithm_usage_bitmap; /* For compression */
	/*
	 * Performance hints.  Directory preallocation should only
	 * happen if the EXT2_FEATURE_COMPAT_DIR_PREALLOC flag is on.
	 */
	uint8_t		s_prealloc_blocks;	/* Nr of blocks to try to preallocate*/
	uint8_t		s_prealloc_dir_blocks;	/* Nr to preallocate for dirs */
	uint16_t	s_reserved_gdt_blocks;	/* Per group table for online growth */
	/*
	 * Journaling support valid if EXT2_FEATURE_COMPAT_HAS_JOURNAL set.
	 */
/*D0*/	uint8_t		s_journal_uuid[16];	/* uuid of journal superblock */
/*E0*/	uint32_t	s_journal_inum;		/* inode number of journal file */
	uint32_t	s_journal_dev;		/* device number of journal file */
	uint32_t	s_last_orphan;		/* start of list of inodes to delete */
	uint32_t	s_hash_seed[4];		/* HTREE hash seed */
	uint8_t		s_def_hash_version;	/* Default hash version to use */
	uint8_t		s_jnl_backup_type;	/* Default type of journal backup */
	uint16_t	s_reserved_word_pad;
/*100*/	uint32_t	s_default_mount_opts;
	uint32_t	s_first_meta_bg;	/* First metablock group */
	/* ext3 additions */
	uint32_t	s_mkfs_time;		/* When the filesystem was created */
	uint32_t	s_jnl_blocks[17];	/* Backup of the journal inode */
	/* 64bit support valid if EXT4_FEATURE_COMPAT_64BIT */
/*150*/	uint32_t	s_blocks_count_hi;	/* Blocks count */
	uint32_t	s_r_blocks_count_hi;	/* Reserved blocks count */
	uint32_t	s_free_blocks_count_hi;	/* Free blocks count */
	uint16_t	s_min_extra_isize;	/* All inodes have at least # bytes */
	uint16_t	s_want_extra_isize; 	/* New inodes should reserve # bytes */
	uint32_t	s_flags;		/* Miscellaneous flags */
	uint16_t	s_raid_stride;		/* RAID stride */
	uint16_t	s_mmp_interval;		/* # seconds to wait in MMP checking */
	uint64_t	s_mmp_block;		/* Block for multi-mount protection */
	uint32_t	s_raid_stripe_width;	/* blocks on all data disks (N*stride)*/
	uint8_t		s_log_groups_per_flex;	/* FLEX_BG group size */
	uint8_t		s_reserved_char_pad2;
	uint16_t	s_reserved_pad;
	uint32_t	s_reserved[162];	/* Padding to the end of the block */
};
struct BUG_ext2_super_block {
	char bug[sizeof(struct ext2_super_block) == 1024 ? 1 : -1];
};

/*
 * Codes for operating systems
 */
#define EXT2_OS_LINUX		0
#define EXT2_OS_HURD		1
#define EXT2_OS_MASIX		2
#define EXT2_OS_FREEBSD		3
#define EXT2_OS_LITES		4

/*
 * Revision levels
 */
#define EXT2_GOOD_OLD_REV	0	/* The good old (original) format */
#define EXT2_DYNAMIC_REV	1	/* V2 format w/ dynamic inode sizes */

#define EXT2_CURRENT_REV	EXT2_GOOD_OLD_REV
#define EXT2_MAX_SUPP_REV	EXT2_DYNAMIC_REV

#define EXT2_GOOD_OLD_INODE_SIZE 128

/*
 * Journal inode backup types
 */
#define EXT3_JNL_BACKUP_BLOCKS	1

/*
 * Feature set definitions
 */

#define EXT2_HAS_COMPAT_FEATURE(sb,mask)			\
	( EXT2_SB(sb)->s_feature_compat & (mask) )
#define EXT2_HAS_RO_COMPAT_FEATURE(sb,mask)			\
	( EXT2_SB(sb)->s_feature_ro_compat & (mask) )
#define EXT2_HAS_INCOMPAT_FEATURE(sb,mask)			\
	( EXT2_SB(sb)->s_feature_incompat & (mask) )

/* for s_feature_compat */
#define EXT2_FEATURE_COMPAT_DIR_PREALLOC	0x0001
#define EXT2_FEATURE_COMPAT_IMAGIC_INODES	0x0002
#define EXT3_FEATURE_COMPAT_HAS_JOURNAL		0x0004
#define EXT2_FEATURE_COMPAT_EXT_ATTR		0x0008
#define EXT2_FEATURE_COMPAT_RESIZE_INO		0x0010
#define EXT2_FEATURE_COMPAT_DIR_INDEX		0x0020

/* for s_feature_ro_compat */
#define EXT2_FEATURE_RO_COMPAT_SPARSE_SUPER	0x0001
#define EXT2_FEATURE_RO_COMPAT_LARGE_FILE	0x0002
#define EXT2_FEATURE_RO_COMPAT_BTREE_DIR	0x0004 /* not used */
#define EXT4_FEATURE_RO_COMPAT_HUGE_FILE	0x0008
#define EXT4_FEATURE_RO_COMPAT_GDT_CSUM		0x0010
#define EXT4_FEATURE_RO_COMPAT_DIR_NLINK	0x0020
#define EXT4_FEATURE_RO_COMPAT_EXTRA_ISIZE	0x0040

/* for s_feature_incompat */
#define EXT2_FEATURE_INCOMPAT_COMPRESSION	0x0001
#define EXT2_FEATURE_INCOMPAT_FILETYPE		0x0002
#define EXT3_FEATURE_INCOMPAT_RECOVER		0x0004
#define EXT3_FEATURE_INCOMPAT_JOURNAL_DEV	0x0008
#define EXT2_FEATURE_INCOMPAT_META_BG		0x0010
#define EXT4_FEATURE_INCOMPAT_EXTENTS		0x0040
#define EXT4_FEATURE_INCOMPAT_64BIT		0x0080
#define EXT4_FEATURE_INCOMPAT_MMP		0x0100
#define EXT4_FEATURE_INCOMPAT_FLEX_BG		0x0200


#define EXT2_FEATURE_COMPAT_SUPP	0
#define EXT2_FEATURE_RO_COMPAT_SUPP	(EXT2_FEATURE_RO_COMPAT_SPARSE_SUPER| \
					 EXT2_FEATURE_RO_COMPAT_LARGE_FILE| \
					 EXT2_FEATURE_RO_COMPAT_BTREE_DIR)
#define EXT2_FEATURE_INCOMPAT_SUPP	(EXT2_FEATURE_INCOMPAT_FILETYPE| \
					 EXT2_FEATURE_INCOMPAT_META_BG)
#define EXT2_FEATURE_INCOMPAT_UNSUPPORTED	(~EXT2_FEATURE_INCOMPAT_SUPP)
#define EXT2_FEATURE_RO_COMPAT_UNSUPPORTED	(~EXT2_FEATURE_RO_COMPAT_SUPP)

#define EXT3_FEATURE_RO_COMPAT_SUPP	(EXT2_FEATURE_RO_COMPAT_SPARSE_SUPER| \
					 EXT2_FEATURE_RO_COMPAT_LARGE_FILE| \
					 EXT2_FEATURE_RO_COMPAT_BTREE_DIR)
#define EXT3_FEATURE_INCOMPAT_SUPP	(EXT2_FEATURE_INCOMPAT_FILETYPE| \
					 EXT3_FEATURE_INCOMPAT_RECOVER| \
					 EXT2_FEATURE_INCOMPAT_META_BG)
#define EXT3_FEATURE_INCOMPAT_UNSUPPORTED	(~EXT3_FEATURE_INCOMPAT_SUPP)
#define EXT3_FEATURE_RO_COMPAT_UNSUPPORTED	(~EXT3_FEATURE_RO_COMPAT_SUPP)


/*
 * Default values for user and/or group using reserved blocks
 */
#define EXT2_DEF_RESUID		0
#define EXT2_DEF_RESGID		0

/*
 * Default mount options
 */
#define EXT2_DEFM_DEBUG		0x0001
#define EXT2_DEFM_BSDGROUPS	0x0002
#define EXT2_DEFM_XATTR_USER	0x0004
#define EXT2_DEFM_ACL		0x0008
#define EXT2_DEFM_UID16		0x0010
#define EXT3_DEFM_JMODE		0x0060
#define EXT3_DEFM_JMODE_DATA	0x0020
#define EXT3_DEFM_JMODE_ORDERED	0x0040
#define EXT3_DEFM_JMODE_WBACK	0x0060

/*
 * Structure of a directory entry
 */
#define EXT2_NAME_LEN 255

struct ext2_dir_entry {
	uint32_t	inode;			/* Inode number */
	uint16_t	rec_len;		/* Directory entry length */
	uint16_t	name_len;		/* Name length */
	char		name[EXT2_NAME_LEN];	/* File name */
};

/*
 * The new version of the directory entry.  Since EXT2 structures are
 * stored in intel byte order, and the name_len field could never be
 * bigger than 255 chars, it's safe to reclaim the extra byte for the
 * file_type field.
 */
struct ext2_dir_entry_2 {
	uint32_t	inode;			/* Inode number */
	uint16_t	rec_len;		/* Directory entry length */
	uint8_t		name_len;		/* Name length */
	uint8_t		file_type;
	char		name[EXT2_NAME_LEN];	/* File name */
};

/*
 * Ext2 directory file types.  Only the low 3 bits are used.  The
 * other bits are reserved for now.
 */
#define EXT2_FT_UNKNOWN		0
#define EXT2_FT_REG_FILE	1
#define EXT2_FT_DIR		2
#define EXT2_FT_CHRDEV		3
#define EXT2_FT_BLKDEV		4
#define EXT2_FT_FIFO		5
#define EXT2_FT_SOCK		6
#define EXT2_FT_SYMLINK		7

#define EXT2_FT_MAX		8

/*
 * EXT2_DIR_PAD defines the directory entries boundaries
 *
 * NOTE: It must be a multiple of 4
 */
#define EXT2_DIR_PAD			4
#define EXT2_DIR_ROUND			(EXT2_DIR_PAD - 1)
#define EXT2_DIR_REC_LEN(name_len)	(((name_len) + 8 + EXT2_DIR_ROUND) & \
					 ~EXT2_DIR_ROUND)

#endif