Config.in 23 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753
  1. #
  2. # For a description of the syntax of this configuration file,
  3. # see docs/Kconfig-language.txt.
  4. #
  5. mainmenu "Configuration"
  6. config HAVE_DOT_CONFIG
  7. bool
  8. default y
  9. menu "Settings"
  10. config DESKTOP
  11. bool "Enable compatibility for full-blown desktop systems (8kb)"
  12. default y
  13. help
  14. Enable applet options and features which are not essential.
  15. Many applet options have dedicated config options to (de)select them
  16. under that applet; this options enables those options which have no
  17. individual config item for them.
  18. Select this if you plan to use busybox on full-blown desktop machine
  19. with common Linux distro, which needs higher level of command-line
  20. compatibility.
  21. If you are preparing your build to be used on an embedded box
  22. where you have tighter control over the entire set of userspace
  23. tools, you can unselect this option for smaller code size.
  24. config EXTRA_COMPAT
  25. bool "Provide compatible behavior for rare corner cases (bigger code)"
  26. default n
  27. help
  28. This option makes grep, sed etc handle rare corner cases
  29. (embedded NUL bytes and such). This makes code bigger and uses
  30. some GNU extensions in libc. You probably only need this option
  31. if you plan to run busybox on desktop.
  32. config FEDORA_COMPAT
  33. bool "Building for Fedora distribution"
  34. default n
  35. help
  36. This option makes some tools behave like they do on Fedora.
  37. At the time of this writing (2017-08) this only affects uname:
  38. normally, uname -p (processor) and uname -i (platform)
  39. are shown as "unknown", but with this option uname -p
  40. shows the same string as uname -m (machine type),
  41. and so does uname -i unless machine type is i486/i586/i686 -
  42. then uname -i shows "i386".
  43. config INCLUDE_SUSv2
  44. bool "Enable obsolete features removed before SUSv3"
  45. default y
  46. help
  47. This option will enable backwards compatibility with SuSv2,
  48. specifically, old-style numeric options ('command -1 <file>')
  49. will be supported in head, tail, and fold. (Note: should
  50. affect renice too.)
  51. config LONG_OPTS
  52. bool "Support --long-options"
  53. default y
  54. help
  55. Enable this if you want busybox applets to use the gnu --long-option
  56. style, in addition to single character -a -b -c style options.
  57. config SHOW_USAGE
  58. bool "Show applet usage messages"
  59. default y
  60. help
  61. Enabling this option, applets will show terse help messages
  62. when invoked with wrong arguments.
  63. If you do not want to show any (helpful) usage message when
  64. issuing wrong command syntax, you can say 'N' here,
  65. saving approximately 7k.
  66. config FEATURE_VERBOSE_USAGE
  67. bool "Show verbose applet usage messages"
  68. default y
  69. depends on SHOW_USAGE
  70. help
  71. All applets will show verbose help messages when invoked with --help.
  72. This will add a lot of text to the binary.
  73. config FEATURE_COMPRESS_USAGE
  74. bool "Store applet usage messages in compressed form"
  75. default y
  76. depends on SHOW_USAGE
  77. help
  78. Store usage messages in .bz2 compressed form, uncompress them
  79. on-the-fly when "APPLET --help" is run.
  80. If you have a really tiny busybox with few applets enabled (and
  81. bunzip2 isn't one of them), the overhead of the decompressor might
  82. be noticeable. Also, if you run executables directly from ROM
  83. and have very little memory, this might not be a win. Otherwise,
  84. you probably want this.
  85. config LFS
  86. bool "Support files > 2 GB"
  87. default y
  88. help
  89. If you need to work with large files, enable this option.
  90. This will have no effect if your kernel or your C
  91. library lacks large file support for large files. Some of the
  92. programs that can benefit from large file support include dd, gzip,
  93. cp, mount, tar.
  94. config TIME64
  95. bool "Support 64bit wide time types"
  96. default y
  97. depends on LFS
  98. help
  99. Make times later than 2038 representable for several libc syscalls
  100. (stat, clk_gettime etc.). Note this switch is specific to glibc
  101. and has no effect on platforms that already use 64bit wide time types
  102. (i.e. all 64bit archs and some selected 32bit archs (currently riscv
  103. and x32)).
  104. config PAM
  105. bool "Support PAM (Pluggable Authentication Modules)"
  106. default n
  107. help
  108. Use PAM in some applets (currently login and httpd) instead
  109. of direct access to password database.
  110. config FEATURE_DEVPTS
  111. bool "Use the devpts filesystem for Unix98 PTYs"
  112. default y
  113. help
  114. Enable if you want to use Unix98 PTY support. If enabled,
  115. busybox will use /dev/ptmx for the master side of the pseudoterminal
  116. and /dev/pts/<number> for the slave side. Otherwise, BSD style
  117. /dev/ttyp<number> will be used. To use this option, you should have
  118. devpts mounted.
  119. config FEATURE_UTMP
  120. bool "Support utmp file"
  121. default y
  122. help
  123. The file /var/run/utmp is used to track who is currently logged in.
  124. With this option on, certain applets (getty, login, telnetd etc)
  125. will create and delete entries there.
  126. "who" applet requires this option.
  127. config FEATURE_WTMP
  128. bool "Support wtmp file"
  129. default y
  130. depends on FEATURE_UTMP
  131. help
  132. The file /var/run/wtmp is used to track when users have logged into
  133. and logged out of the system.
  134. With this option on, certain applets (getty, login, telnetd etc)
  135. will append new entries there.
  136. "last" applet requires this option.
  137. config FEATURE_PIDFILE
  138. bool "Support writing pidfiles"
  139. default y
  140. help
  141. This option makes some applets (e.g. crond, syslogd, inetd) write
  142. a pidfile at the configured PID_FILE_PATH. It has no effect
  143. on applets which require pidfiles to run.
  144. config PID_FILE_PATH
  145. string "Directory for pidfiles"
  146. default "/var/run"
  147. depends on FEATURE_PIDFILE || FEATURE_CROND_SPECIAL_TIMES
  148. help
  149. This is the default path where pidfiles are created. Applets which
  150. allow you to set the pidfile path on the command line will override
  151. this value. The option has no effect on applets that require you to
  152. specify a pidfile path. When crond has the 'Support special times'
  153. option enabled, the 'crond.reboot' file is also stored here.
  154. config BUSYBOX
  155. bool "Include busybox applet"
  156. default y
  157. help
  158. The busybox applet provides general help message and allows
  159. the included applets to be listed. It also provides
  160. optional --install command to create applet links. If you unselect
  161. this option, running busybox without any arguments will give
  162. just a cryptic error message:
  163. $ busybox
  164. busybox: applet not found
  165. Running "busybox APPLET [ARGS...]" will still work, of course.
  166. config FEATURE_SHOW_SCRIPT
  167. bool "Support --show SCRIPT"
  168. default y
  169. depends on BUSYBOX
  170. config FEATURE_INSTALLER
  171. bool "Support --install [-s] to install applet links at runtime"
  172. default y
  173. depends on BUSYBOX
  174. help
  175. Enable 'busybox --install [-s]' support. This will allow you to use
  176. busybox at runtime to create hard links or symlinks for all the
  177. applets that are compiled into busybox.
  178. config INSTALL_NO_USR
  179. bool "Don't use /usr"
  180. default n
  181. help
  182. Disable use of /usr. "busybox --install" and "make install"
  183. will install applets only to /bin and /sbin,
  184. never to /usr/bin or /usr/sbin.
  185. config FEATURE_SUID
  186. bool "Drop SUID state for most applets"
  187. default y
  188. help
  189. With this option you can install the busybox binary belonging
  190. to root with the suid bit set, enabling some applets to perform
  191. root-level operations even when run by ordinary users
  192. (for example, mounting of user mounts in fstab needs this).
  193. With this option enabled, busybox drops privileges for applets
  194. that don't need root access, before entering their main() function.
  195. If you are really paranoid and don't want even initial busybox code
  196. to run under root for every applet, build two busybox binaries with
  197. different applets in them (and the appropriate symlinks pointing
  198. to each binary), and only set the suid bit on the one that needs it.
  199. Some applets which require root rights (need suid bit on the binary
  200. or to be run by root) and will refuse to execute otherwise:
  201. crontab, login, passwd, su, vlock, wall.
  202. The applets which will use root rights if they have them
  203. (via suid bit, or because run by root), but would try to work
  204. without root right nevertheless:
  205. findfs, ping[6], traceroute[6], mount.
  206. Note that if you DO NOT select this option, but DO make busybox
  207. suid root, ALL applets will run under root, which is a huge
  208. security hole (think "cp /some/file /etc/passwd").
  209. config FEATURE_SUID_CONFIG
  210. bool "Enable SUID configuration via /etc/busybox.conf"
  211. default y
  212. depends on FEATURE_SUID
  213. help
  214. Allow the SUID/SGID state of an applet to be determined at runtime
  215. by checking /etc/busybox.conf. (This is sort of a poor man's sudo.)
  216. The format of this file is as follows:
  217. APPLET = [Ssx-][Ssx-][x-] [USER.GROUP]
  218. s: USER or GROUP is allowed to execute APPLET.
  219. APPLET will run under USER or GROUP
  220. (regardless of who's running it).
  221. S: USER or GROUP is NOT allowed to execute APPLET.
  222. APPLET will run under USER or GROUP.
  223. This option is not very sensical.
  224. x: USER/GROUP/others are allowed to execute APPLET.
  225. No UID/GID change will be done when it is run.
  226. -: USER/GROUP/others are not allowed to execute APPLET.
  227. An example might help:
  228. |[SUID]
  229. |su = ssx root.0 # applet su can be run by anyone and runs with
  230. | # euid=0,egid=0
  231. |su = ssx # exactly the same
  232. |
  233. |mount = sx- root.disk # applet mount can be run by root and members
  234. | # of group disk (but not anyone else)
  235. | # and runs with euid=0 (egid is not changed)
  236. |
  237. |cp = --- # disable applet cp for everyone
  238. The file has to be owned by user root, group root and has to be
  239. writeable only by root:
  240. (chown 0.0 /etc/busybox.conf; chmod 600 /etc/busybox.conf)
  241. The busybox executable has to be owned by user root, group
  242. root and has to be setuid root for this to work:
  243. (chown 0.0 /bin/busybox; chmod 4755 /bin/busybox)
  244. Robert 'sandman' Griebl has more information here:
  245. <url: http://www.softforge.de/bb/suid.html >.
  246. config FEATURE_SUID_CONFIG_QUIET
  247. bool "Suppress warning message if /etc/busybox.conf is not readable"
  248. default y
  249. depends on FEATURE_SUID_CONFIG
  250. help
  251. /etc/busybox.conf should be readable by the user needing the SUID,
  252. check this option to avoid users to be notified about missing
  253. permissions.
  254. config FEATURE_PREFER_APPLETS
  255. bool "exec prefers applets"
  256. default n
  257. help
  258. This is an experimental option which directs applets about to
  259. call 'exec' to try and find an applicable busybox applet before
  260. searching the PATH. This is typically done by exec'ing
  261. /proc/self/exe.
  262. This may affect shell, find -exec, xargs and similar applets.
  263. They will use applets even if /bin/APPLET -> busybox link
  264. is missing (or is not a link to busybox). However, this causes
  265. problems in chroot jails without mounted /proc and with ps/top
  266. (command name can be shown as 'exe' for applets started this way).
  267. config BUSYBOX_EXEC_PATH
  268. string "Path to busybox executable"
  269. default "/proc/self/exe"
  270. help
  271. When applets need to run other applets, busybox
  272. sometimes needs to exec() itself. When the /proc filesystem is
  273. mounted, /proc/self/exe always points to the currently running
  274. executable. If you haven't got /proc, set this to wherever you
  275. want to run busybox from.
  276. config SELINUX
  277. bool "Support NSA Security Enhanced Linux"
  278. default n
  279. help
  280. Enable support for SELinux in applets ls, ps, and id. Also provide
  281. the option of compiling in SELinux applets.
  282. If you do not have a complete SELinux userland installed, this stuff
  283. will not compile. Specifially, libselinux 1.28 or better is
  284. directly required by busybox. If the installation is located in a
  285. non-standard directory, provide it by invoking make as follows:
  286. CFLAGS=-I<libselinux-include-path> \
  287. LDFLAGS=-L<libselinux-lib-path> \
  288. make
  289. Most people will leave this set to 'N'.
  290. config FEATURE_CLEAN_UP
  291. bool "Clean up all memory before exiting (usually not needed)"
  292. default n
  293. help
  294. As a size optimization, busybox normally exits without explicitly
  295. freeing dynamically allocated memory or closing files. This saves
  296. space since the OS will clean up for us, but it can confuse debuggers
  297. like valgrind, which report tons of memory and resource leaks.
  298. Don't enable this unless you have a really good reason to clean
  299. things up manually.
  300. config FEATURE_SYSLOG_INFO
  301. bool "Support LOG_INFO level syslog messages"
  302. default y
  303. depends on FEATURE_SYSLOG
  304. help
  305. Applets which send their output to syslog use either LOG_INFO or
  306. LOG_ERR log levels, but by disabling this option all messages will
  307. be logged at the LOG_ERR level, saving just under 200 bytes.
  308. # These are auto-selected by other options
  309. config FEATURE_SYSLOG
  310. bool #No description makes it a hidden option
  311. default n
  312. #help
  313. #This option is auto-selected when you select any applet which may
  314. #send its output to syslog. You do not need to select it manually.
  315. comment 'Build Options'
  316. config STATIC
  317. bool "Build static binary (no shared libs)"
  318. default n
  319. help
  320. If you want to build a static binary, which does not use
  321. or require any shared libraries, enable this option.
  322. Static binaries are larger, but do not require functioning
  323. dynamic libraries to be present, which is important if used
  324. as a system rescue tool.
  325. config PIE
  326. bool "Build position independent executable"
  327. default n
  328. depends on !STATIC
  329. help
  330. Hardened code option. PIE binaries are loaded at a different
  331. address at each invocation. This has some overhead,
  332. particularly on x86-32 which is short on registers.
  333. Most people will leave this set to 'N'.
  334. config NOMMU
  335. bool "Force NOMMU build"
  336. default n
  337. help
  338. Busybox tries to detect whether architecture it is being
  339. built against supports MMU or not. If this detection fails,
  340. or if you want to build NOMMU version of busybox for testing,
  341. you may force NOMMU build here.
  342. Most people will leave this set to 'N'.
  343. # PIE can be made to work with BUILD_LIBBUSYBOX, but currently
  344. # build system does not support that
  345. config BUILD_LIBBUSYBOX
  346. bool "Build shared libbusybox"
  347. default n
  348. depends on !FEATURE_PREFER_APPLETS && !PIE && !STATIC
  349. help
  350. Build a shared library libbusybox.so.N.N.N which contains all
  351. busybox code.
  352. This feature allows every applet to be built as a really tiny
  353. separate executable linked against the library:
  354. |$ size 0_lib/l*
  355. | text data bss dec hex filename
  356. | 939 212 28 1179 49b 0_lib/last
  357. | 939 212 28 1179 49b 0_lib/less
  358. | 919138 8328 1556 929022 e2cfe 0_lib/libbusybox.so.1.N.M
  359. This is useful on NOMMU systems which are not capable
  360. of sharing executables, but are capable of sharing code
  361. in dynamic libraries.
  362. config FEATURE_LIBBUSYBOX_STATIC
  363. bool "Pull in all external references into libbusybox"
  364. default n
  365. depends on BUILD_LIBBUSYBOX
  366. help
  367. Make libbusybox library independent, not using or requiring
  368. any other shared libraries.
  369. config FEATURE_INDIVIDUAL
  370. bool "Produce a binary for each applet, linked against libbusybox"
  371. default y
  372. depends on BUILD_LIBBUSYBOX
  373. help
  374. If your CPU architecture doesn't allow for sharing text/rodata
  375. sections of running binaries, but allows for runtime dynamic
  376. libraries, this option will allow you to reduce memory footprint
  377. when you have many different applets running at once.
  378. If your CPU architecture allows for sharing text/rodata,
  379. having single binary is more optimal.
  380. Each applet will be a tiny program, dynamically linked
  381. against libbusybox.so.N.N.N.
  382. You need to have a working dynamic linker.
  383. config FEATURE_SHARED_BUSYBOX
  384. bool "Produce additional busybox binary linked against libbusybox"
  385. default y
  386. depends on BUILD_LIBBUSYBOX
  387. help
  388. Build busybox, dynamically linked against libbusybox.so.N.N.N.
  389. You need to have a working dynamic linker.
  390. ### config BUILD_AT_ONCE
  391. ### bool "Compile all sources at once"
  392. ### default n
  393. ### help
  394. ### Normally each source-file is compiled with one invocation of
  395. ### the compiler.
  396. ### If you set this option, all sources are compiled at once.
  397. ### This gives the compiler more opportunities to optimize which can
  398. ### result in smaller and/or faster binaries.
  399. ###
  400. ### Setting this option will consume alot of memory, e.g. if you
  401. ### enable all applets with all features, gcc uses more than 300MB
  402. ### RAM during compilation of busybox.
  403. ###
  404. ### This option is most likely only beneficial for newer compilers
  405. ### such as gcc-4.1 and above.
  406. ###
  407. ### Say 'N' unless you know what you are doing.
  408. config CROSS_COMPILER_PREFIX
  409. string "Cross compiler prefix"
  410. default ""
  411. help
  412. If you want to build busybox with a cross compiler, then you
  413. will need to set this to the cross-compiler prefix, for example,
  414. "i386-uclibc-".
  415. Note that CROSS_COMPILE environment variable or
  416. "make CROSS_COMPILE=xxx ..." will override this selection.
  417. Native builds leave this empty.
  418. config SYSROOT
  419. string "Path to sysroot"
  420. default ""
  421. help
  422. If you want to build busybox with a cross compiler, then you
  423. might also need to specify where /usr/include and /usr/lib
  424. will be found.
  425. For example, busybox can be built against an installed
  426. Android NDK, platform version 9, for ARM ABI with
  427. CONFIG_SYSROOT=/opt/android-ndk/platforms/android-9/arch-arm
  428. Native builds leave this empty.
  429. config EXTRA_CFLAGS
  430. string "Additional CFLAGS"
  431. default ""
  432. help
  433. Additional CFLAGS to pass to the compiler verbatim.
  434. config EXTRA_LDFLAGS
  435. string "Additional LDFLAGS"
  436. default ""
  437. help
  438. Additional LDFLAGS to pass to the linker verbatim.
  439. config EXTRA_LDLIBS
  440. string "Additional LDLIBS"
  441. default ""
  442. help
  443. Additional LDLIBS to pass to the linker with -l.
  444. config USE_PORTABLE_CODE
  445. bool "Avoid using GCC-specific code constructs"
  446. default n
  447. help
  448. Use this option if you are trying to compile busybox with
  449. compiler other than gcc.
  450. If you do use gcc, this option may needlessly increase code size.
  451. config STACK_OPTIMIZATION_386
  452. bool "Use -mpreferred-stack-boundary=2 on i386 arch"
  453. default y
  454. help
  455. This option makes for smaller code, but some libc versions
  456. do not work with it (they use SSE instructions without
  457. ensuring stack alignment).
  458. config STATIC_LIBGCC
  459. bool "Use -static-libgcc"
  460. default y
  461. help
  462. This option instructs gcc to link in a static version of its
  463. support library, libgcc. This means that the binary will require
  464. one fewer dynamic library at run time.
  465. comment 'Installation Options ("make install" behavior)'
  466. choice
  467. prompt "What kind of applet links to install"
  468. default INSTALL_APPLET_SYMLINKS
  469. help
  470. Choose what kind of links to applets are created by "make install".
  471. config INSTALL_APPLET_SYMLINKS
  472. bool "as soft-links"
  473. help
  474. Install applets as soft-links to the busybox binary. This needs some
  475. free inodes on the filesystem, but might help with filesystem
  476. generators that can't cope with hard-links.
  477. config INSTALL_APPLET_HARDLINKS
  478. bool "as hard-links"
  479. help
  480. Install applets as hard-links to the busybox binary. This might
  481. count on a filesystem with few inodes.
  482. config INSTALL_APPLET_SCRIPT_WRAPPERS
  483. bool "as script wrappers"
  484. help
  485. Install applets as script wrappers that call the busybox binary.
  486. config INSTALL_APPLET_DONT
  487. bool "not installed"
  488. help
  489. Do not install applet links. Useful when you plan to use
  490. busybox --install for installing links, or plan to use
  491. a standalone shell and thus don't need applet links.
  492. endchoice
  493. choice
  494. prompt "/bin/sh applet link"
  495. default INSTALL_SH_APPLET_SYMLINK
  496. depends on INSTALL_APPLET_SCRIPT_WRAPPERS
  497. help
  498. Choose how you install /bin/sh applet link.
  499. config INSTALL_SH_APPLET_SYMLINK
  500. bool "as soft-link"
  501. help
  502. Install /bin/sh applet as soft-link to the busybox binary.
  503. config INSTALL_SH_APPLET_HARDLINK
  504. bool "as hard-link"
  505. help
  506. Install /bin/sh applet as hard-link to the busybox binary.
  507. config INSTALL_SH_APPLET_SCRIPT_WRAPPER
  508. bool "as script wrapper"
  509. help
  510. Install /bin/sh applet as script wrapper that calls
  511. the busybox binary.
  512. endchoice
  513. config PREFIX
  514. string "Destination path for 'make install'"
  515. default "./_install"
  516. help
  517. Where "make install" should install busybox binary and links.
  518. comment 'Debugging Options'
  519. config DEBUG
  520. bool "Build with debug information"
  521. default n
  522. help
  523. Say Y here to compile with debug information.
  524. This increases the size of the binary considerably, and
  525. should only be used when doing development.
  526. This adds -g option to gcc command line.
  527. Most people should answer N.
  528. config DEBUG_PESSIMIZE
  529. bool "Disable compiler optimizations"
  530. default n
  531. depends on DEBUG
  532. help
  533. The compiler's optimization of source code can eliminate and reorder
  534. code, resulting in an executable that's hard to understand when
  535. stepping through it with a debugger. This switches it off, resulting
  536. in a much bigger executable that more closely matches the source
  537. code.
  538. This replaces -Os/-O2 with -O0 in gcc command line.
  539. config DEBUG_SANITIZE
  540. bool "Enable runtime sanitizers (ASAN/LSAN/USAN/etc...)"
  541. default n
  542. help
  543. Say Y here if you want to enable runtime sanitizers. These help
  544. catch bad memory accesses (e.g. buffer overflows), but will make
  545. the executable larger and slow down runtime a bit.
  546. This adds -fsanitize=foo options to gcc command line.
  547. If you aren't developing/testing busybox, say N here.
  548. config UNIT_TEST
  549. bool "Build unit tests"
  550. default n
  551. help
  552. Say Y here if you want to build unit tests (both the framework and
  553. test cases) as an applet. This results in bigger code, so you
  554. probably don't want this option in production builds.
  555. config WERROR
  556. bool "Abort compilation on any warning"
  557. default n
  558. help
  559. This adds -Werror to gcc command line.
  560. Most people should answer N.
  561. config WARN_SIMPLE_MSG
  562. bool "Warn about single parameter bb_xx_msg calls"
  563. default n
  564. help
  565. This will cause warnings to be shown for any instances of
  566. bb_error_msg(), bb_error_msg_and_die(), bb_perror_msg(),
  567. bb_perror_msg_and_die(), bb_herror_msg() or bb_herror_msg_and_die()
  568. being called with a single parameter. In these cases the equivalent
  569. bb_simple_xx_msg function should be used instead.
  570. Note that use of STRERROR_FMT may give false positives.
  571. If you aren't developing busybox, say N here.
  572. choice
  573. prompt "Additional debugging library"
  574. default NO_DEBUG_LIB
  575. help
  576. Using an additional debugging library will make busybox become
  577. considerably larger and will cause it to run more slowly. You
  578. should always leave this option disabled for production use.
  579. dmalloc support:
  580. ----------------
  581. This enables compiling with dmalloc ( http://dmalloc.com/ )
  582. which is an excellent public domain mem leak and malloc problem
  583. detector. To enable dmalloc, before running busybox you will
  584. want to properly set your environment, for example:
  585. export DMALLOC_OPTIONS=debug=0x34f47d83,inter=100,log=logfile
  586. The 'debug=' value is generated using the following command
  587. dmalloc -p log-stats -p log-non-free -p log-bad-space \
  588. -p log-elapsed-time -p check-fence -p check-heap \
  589. -p check-lists -p check-blank -p check-funcs -p realloc-copy \
  590. -p allow-free-null
  591. Electric-fence support:
  592. -----------------------
  593. This enables compiling with Electric-fence support. Electric
  594. fence is another very useful malloc debugging library which uses
  595. your computer's virtual memory hardware to detect illegal memory
  596. accesses. This support will make busybox be considerably larger
  597. and run slower, so you should leave this option disabled unless
  598. you are hunting a hard to find memory problem.
  599. config NO_DEBUG_LIB
  600. bool "None"
  601. config DMALLOC
  602. bool "Dmalloc"
  603. config EFENCE
  604. bool "Electric-fence"
  605. endchoice
  606. source libbb/Config.in
  607. endmenu
  608. comment "Applets"
  609. source archival/Config.in
  610. source coreutils/Config.in
  611. source console-tools/Config.in
  612. source debianutils/Config.in
  613. source klibc-utils/Config.in
  614. source editors/Config.in
  615. source findutils/Config.in
  616. source init/Config.in
  617. source loginutils/Config.in
  618. source e2fsprogs/Config.in
  619. source modutils/Config.in
  620. source util-linux/Config.in
  621. source miscutils/Config.in
  622. source networking/Config.in
  623. source printutils/Config.in
  624. source mailutils/Config.in
  625. source procps/Config.in
  626. source runit/Config.in
  627. source selinux/Config.in
  628. source shell/Config.in
  629. source sysklogd/Config.in