123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312 |
- /* vi: set sw=4 ts=4: */
- /*
- * uncompress for busybox -- (c) 2002 Robert Griebl
- *
- * based on the original compress42.c source
- * (see disclaimer below)
- */
- /* (N)compress42.c - File compression ala IEEE Computer, Mar 1992.
- *
- * Authors:
- * Spencer W. Thomas (decvax!harpo!utah-cs!utah-gr!thomas)
- * Jim McKie (decvax!mcvax!jim)
- * Steve Davies (decvax!vax135!petsd!peora!srd)
- * Ken Turkowski (decvax!decwrl!turtlevax!ken)
- * James A. Woods (decvax!ihnp4!ames!jaw)
- * Joe Orost (decvax!vax135!petsd!joe)
- * Dave Mack (csu@alembic.acs.com)
- * Peter Jannesen, Network Communication Systems
- * (peter@ncs.nl)
- *
- * marc@suse.de : a small security fix for a buffer overflow
- *
- * [... History snipped ...]
- */
- #include "libbb.h"
- #include "bb_archive.h"
- /* Default input buffer size */
- #define IBUFSIZ 2048
- /* Default output buffer size */
- #define OBUFSIZ 2048
- /* Defines for third byte of header */
- #define BIT_MASK 0x1f /* Mask for 'number of compresssion bits' */
- /* Masks 0x20 and 0x40 are free. */
- /* I think 0x20 should mean that there is */
- /* a fourth header byte (for expansion). */
- #define BLOCK_MODE 0x80 /* Block compression if table is full and */
- /* compression rate is dropping flush tables */
- /* the next two codes should not be changed lightly, as they must not */
- /* lie within the contiguous general code space. */
- #define FIRST 257 /* first free entry */
- #define CLEAR 256 /* table clear output code */
- #define INIT_BITS 9 /* initial number of bits/code */
- /* machine variants which require cc -Dmachine: pdp11, z8000, DOS */
- #define HBITS 17 /* 50% occupancy */
- #define HSIZE (1<<HBITS)
- #define HMASK (HSIZE-1) /* unused */
- #define HPRIME 9941 /* unused */
- #define BITS 16
- #define BITS_STR "16"
- #undef MAXSEG_64K /* unused */
- #define MAXCODE(n) (1L << (n))
- #define htabof(i) htab[i]
- #define codetabof(i) codetab[i]
- #define tab_prefixof(i) codetabof(i)
- #define tab_suffixof(i) ((unsigned char *)(htab))[i]
- #define de_stack ((unsigned char *)&(htab[HSIZE-1]))
- #define clear_tab_prefixof() memset(codetab, 0, 256)
- /*
- * Decompress stdin to stdout. This routine adapts to the codes in the
- * file building the "string" table on-the-fly; requiring no table to
- * be stored in the compressed file.
- */
- IF_DESKTOP(long long) int FAST_FUNC
- unpack_Z_stream(transformer_state_t *xstate)
- {
- IF_DESKTOP(long long total_written = 0;)
- IF_DESKTOP(long long) int retval = -1;
- unsigned char *stackp;
- int finchar;
- long oldcode;
- long incode;
- int inbits;
- int posbits;
- int outpos;
- int insize;
- int bitmask;
- long free_ent;
- long maxcode;
- long maxmaxcode;
- int n_bits;
- int rsize = 0;
- unsigned char *inbuf; /* were eating insane amounts of stack - */
- unsigned char *outbuf; /* bad for some embedded targets */
- unsigned char *htab;
- unsigned short *codetab;
- /* Hmm, these were statics - why?! */
- /* user settable max # bits/code */
- int maxbits; /* = BITS; */
- /* block compress mode -C compatible with 2.0 */
- int block_mode; /* = BLOCK_MODE; */
- if (check_signature16(xstate, COMPRESS_MAGIC))
- return -1;
- inbuf = xzalloc(IBUFSIZ + 64);
- outbuf = xzalloc(OBUFSIZ + 2048);
- htab = xzalloc(HSIZE); /* wasn't zeroed out before, maybe can xmalloc? */
- codetab = xzalloc(HSIZE * sizeof(codetab[0]));
- insize = 0;
- /* xread isn't good here, we have to return - caller may want
- * to do some cleanup (e.g. delete incomplete unpacked file etc) */
- if (full_read(xstate->src_fd, inbuf, 1) != 1) {
- bb_simple_error_msg("short read");
- goto err;
- }
- maxbits = inbuf[0] & BIT_MASK;
- block_mode = inbuf[0] & BLOCK_MODE;
- maxmaxcode = MAXCODE(maxbits);
- if (maxbits > BITS) {
- bb_error_msg("compressed with %d bits, can only handle "
- BITS_STR" bits", maxbits);
- goto err;
- }
- n_bits = INIT_BITS;
- maxcode = MAXCODE(INIT_BITS) - 1;
- bitmask = (1 << INIT_BITS) - 1;
- oldcode = -1;
- finchar = 0;
- outpos = 0;
- posbits = 0 << 3;
- free_ent = ((block_mode) ? FIRST : 256);
- /* As above, initialize the first 256 entries in the table. */
- /*clear_tab_prefixof(); - done by xzalloc */
- {
- int i;
- for (i = 255; i >= 0; --i)
- tab_suffixof(i) = (unsigned char) i;
- }
- do {
- resetbuf:
- {
- int i;
- int e;
- int o;
- o = posbits >> 3;
- e = insize - o;
- for (i = 0; i < e; ++i)
- inbuf[i] = inbuf[i + o];
- insize = e;
- posbits = 0;
- }
- if (insize < (int) (IBUFSIZ + 64) - IBUFSIZ) {
- rsize = safe_read(xstate->src_fd, inbuf + insize, IBUFSIZ);
- if (rsize < 0)
- bb_simple_error_msg_and_die(bb_msg_read_error);
- insize += rsize;
- }
- inbits = ((rsize > 0) ? (insize - insize % n_bits) << 3 :
- (insize << 3) - (n_bits - 1));
- while (inbits > posbits) {
- long code;
- if (free_ent > maxcode) {
- posbits =
- ((posbits - 1) +
- ((n_bits << 3) -
- (posbits - 1 + (n_bits << 3)) % (n_bits << 3)));
- ++n_bits;
- if (n_bits == maxbits) {
- maxcode = maxmaxcode;
- } else {
- maxcode = MAXCODE(n_bits) - 1;
- }
- bitmask = (1 << n_bits) - 1;
- goto resetbuf;
- }
- {
- unsigned char *p = &inbuf[posbits >> 3];
- code = ((p[0]
- | ((long) (p[1]) << 8)
- | ((long) (p[2]) << 16)) >> (posbits & 0x7)) & bitmask;
- }
- posbits += n_bits;
- if (oldcode == -1) {
- if (code >= 256)
- bb_simple_error_msg_and_die("corrupted data"); /* %ld", code); */
- oldcode = code;
- finchar = (int) oldcode;
- outbuf[outpos++] = (unsigned char) finchar;
- continue;
- }
- if (code == CLEAR && block_mode) {
- clear_tab_prefixof();
- free_ent = FIRST - 1;
- posbits =
- ((posbits - 1) +
- ((n_bits << 3) -
- (posbits - 1 + (n_bits << 3)) % (n_bits << 3)));
- n_bits = INIT_BITS;
- maxcode = MAXCODE(INIT_BITS) - 1;
- bitmask = (1 << INIT_BITS) - 1;
- goto resetbuf;
- }
- incode = code;
- stackp = de_stack;
- /* Special case for KwKwK string. */
- if (code >= free_ent) {
- if (code > free_ent) {
- /*
- unsigned char *p;
- posbits -= n_bits;
- p = &inbuf[posbits >> 3];
- bb_error_msg
- ("insize:%d posbits:%d inbuf:%02X %02X %02X %02X %02X (%d)",
- insize, posbits, p[-1], p[0], p[1], p[2], p[3],
- (posbits & 07));
- */
- bb_simple_error_msg("corrupted data");
- goto err;
- }
- *--stackp = (unsigned char) finchar;
- code = oldcode;
- }
- /* Generate output characters in reverse order */
- while (code >= 256) {
- if (stackp <= &htabof(0))
- bb_simple_error_msg_and_die("corrupted data");
- *--stackp = tab_suffixof(code);
- code = tab_prefixof(code);
- }
- finchar = tab_suffixof(code);
- *--stackp = (unsigned char) finchar;
- /* And put them out in forward order */
- {
- int i;
- i = de_stack - stackp;
- if (outpos + i >= OBUFSIZ) {
- do {
- if (i > OBUFSIZ - outpos) {
- i = OBUFSIZ - outpos;
- }
- if (i > 0) {
- memcpy(outbuf + outpos, stackp, i);
- outpos += i;
- }
- if (outpos >= OBUFSIZ) {
- xtransformer_write(xstate, outbuf, outpos);
- IF_DESKTOP(total_written += outpos;)
- outpos = 0;
- }
- stackp += i;
- i = de_stack - stackp;
- } while (i > 0);
- } else {
- memcpy(outbuf + outpos, stackp, i);
- outpos += i;
- }
- }
- /* Generate the new entry. */
- if (free_ent < maxmaxcode) {
- tab_prefixof(free_ent) = (unsigned short) oldcode;
- tab_suffixof(free_ent) = (unsigned char) finchar;
- free_ent++;
- }
- /* Remember previous code. */
- oldcode = incode;
- }
- } while (rsize > 0);
- if (outpos > 0) {
- xtransformer_write(xstate, outbuf, outpos);
- IF_DESKTOP(total_written += outpos;)
- }
- retval = IF_DESKTOP(total_written) + 0;
- err:
- free(inbuf);
- free(outbuf);
- free(htab);
- free(codetab);
- return retval;
- }
|