- refs #11342 where errors with git https interactions
were observed
- problem was caused by 1st sends of size larger than 64KB
which resulted in later retries of 64KB only
- limit sending of 1st block to 64KB
- adjust h2/h3 filters to cope with parsing the HTTP/1.1
formatted request in chunks
- introducing Curl_nwrite() as companion to Curl_write()
for the many cases where the sockindex is already known
Fixes#11342 (again)
Closes#11803
Add an intermediate cast to `void *`, as done everywhere else when
casting from `sockaddr *` to `sockaddr_in *`.
Closes https://github.com/curl/curl/pull/10528
- Curl_write_plain/Curl_read_plain have been eliminated. Last code use
now uses Curl_conn_send/recv so that requests use conn->send/revc
callbacks which defaults to cfilters use.
- Curl_recv_plain/Curl_send_plain have been internalized in cf-socket.c.
- USE_RECV_BEFORE_SEND_WORKAROUND (active on Windows) has been moved
into cf-socket.c. The pre_recv buffer is held at the socket filter
context. `postponed_data` structures have been removed from
`connectdata`.
- the hanger in HTTP/2 request handling was a result of read buffering
on all sends and the multi handling is not prepared for this. The
following happens:
- multi preforms on a HTTP/2 easy handle
- h2 reads and processes data
- this leads to a send of h2 data
- which receives and buffers before the send
- h2 returns
- multi selects on the socket, but no data arrives (its in the buffer already)
the workaround now receives data in a loop as long as there is something in
the buffer. The real fix would be for multi to change, so that `data_pending`
is evaluated before deciding to wait on the socket.
io_buffer, optional, in cf-socket.c, http/2 sets state.drain if lower
filter have pending data.
This io_buffer is only available/used when the
-DUSE_RECV_BEFORE_SEND_WORKAROUND is active, e.g. on Windows
configurations. It also maintains the original checks on protocol
handler being HTTP and conn->send/recv not being replaced.
The HTTP/2 (nghttp2) cfilter now sets data->state.drain when it finds
out that the "lower" filter chain has still pending data at the end of
its IO operation. This prevents the processing from becoming stalled.
Closes#10280
- copy `struct Curl_addrinfo` on filter setup into context
- remove `struct Curl_addrinfoi *` with `struct Curl_sockaddr_ex *` in
connectdata that is set and NULLed by the socket filter
- this means we have no reference to the resolver info in connectdata or
its filters
- trigger the CF_CTRL_CONN_INFO_UPDATE event when the complete filter
chain reaches connected status
- update easy handle connection information on CF_CTRL_DATA_SETUP event.
Closes#10213
- they are mostly pointless in all major jurisdictions
- many big corporations and projects already don't use them
- saves us from pointless churn
- git keeps history for us
- the year range is kept in COPYING
checksrc is updated to allow non-year using copyright statements
Closes#10205
Prior to this change Curl_read_plain would attempt to read the
socket directly. On Windows that's a problem because recv data may be
cached by libcurl and that data is only drained using Curl_recv_plain.
Rather than rewrite Curl_read_plain to handle cached recv data, I
changed it to wrap Curl_recv_plain, in much the same way that
Curl_write_plain already wraps Curl_send_plain.
Curl_read_plain -> Curl_recv_plain
Curl_write_plain -> Curl_send_plain
This fixes a bug in the schannel backend where decryption of arbitrary
TLS records fails because cached recv data is never drained. We send
data (TLS records formed by Schannel) using Curl_write_plain, which
calls Curl_send_plain, and that may do a recv-before-send
("pre-receive") to cache received data. The code calls Curl_read_plain
to read data (TLS records from the server), which prior to this change
did not call Curl_recv_plain and therefore cached recv data wasn't
retrieved, resulting in malformed TLS records and decryption failure
(SEC_E_DECRYPT_FAILURE).
The bug has only been observed during Schannel TLS 1.3 handshakes. Refer
to the issue and PR for more information.
--
This is take 2 of the original fix. It preserves the original behavior
of Curl_read_plain to write 0 to the bytes read parameter on error,
since apparently some callers expect that (SOCKS tests were hanging).
The original fix which landed in 12e1def5 and was later reverted in
18383fbf failed to work properly because it did not do that.
Also, it changes Curl_write_plain the same way to complement
Curl_read_plain, and it changes Curl_send_plain to return -1 instead of
0 on CURLE_AGAIN to complement Curl_recv_plain.
Behavior on error with these changes:
Curl_recv_plain returns -1 and *code receives error code.
Curl_send_plain returns -1 and *code receives error code.
Curl_read_plain returns error code and *n (bytes read) receives 0.
Curl_write_plain returns error code and *written receives 0.
--
Ref: https://github.com/curl/curl/issues/9431#issuecomment-1312420361
Assisted-by: Joel Depooter
Reported-by: Egor Pugin
Fixes https://github.com/curl/curl/issues/9431
Closes https://github.com/curl/curl/pull/9949
Prior to this change Curl_read_plain would attempt to read the
socket directly. On Windows that's a problem because recv data may be
cached by libcurl and that data is only drained using Curl_recv_plain.
Rather than rewrite Curl_read_plain to handle cached recv data, I
changed it to wrap Curl_recv_plain, in much the same way that
Curl_write_plain already wraps Curl_send_plain.
Curl_read_plain -> Curl_recv_plain
Curl_write_plain -> Curl_send_plain
This fixes a bug in the schannel backend where decryption of arbitrary
TLS records fails because cached recv data is never drained. We send
data (TLS records formed by Schannel) using Curl_write_plain, which
calls Curl_send_plain, and that may do a recv-before-send
("pre-receive") to cache received data. The code calls Curl_read_plain
to read data (TLS records from the server), which prior to this change
did not call Curl_recv_plain and therefore cached recv data wasn't
retrieved, resulting in malformed TLS records and decryption failure
(SEC_E_DECRYPT_FAILURE).
The bug has only been observed during Schannel TLS 1.3 handshakes. Refer
to the issue and PR for more information.
Ref: https://github.com/curl/curl/issues/9431#issuecomment-1312420361
Assisted-by: Joel Depooter
Reported-by: Egor Pugin
Fixes https://github.com/curl/curl/issues/9431
Closes https://github.com/curl/curl/pull/9904
- Include arpa/inet.h in all units where htonl is called.
Signed-off-by: Randall S. Becker <rsbecker@nexbridge.com>
Closes https://github.com/curl/curl/pull/9816
Add licensing and copyright information for all files in this repository. This
either happens in the file itself as a comment header or in the file
`.reuse/dep5`.
This commit also adds a Github workflow to check pull requests and adapts
copyright.pl to the changes.
Closes#8869
- the data needs to be "line-based" anyway since it's also passed to the
debug callback/application
- it makes infof() work like failf() and consistency is good
- there's an assert that triggers on newlines in the format string
- Also removes a few instances of "..."
- Removes the code that would append "..." to the end of the data *iff*
it was truncated in infof()
Closes#7357
... in most cases instead of 'struct connectdata *' but in some cases in
addition to.
- We mostly operate on transfers and not connections.
- We need the transfer handle to log, store data and more. Everything in
libcurl is driven by a transfer (the CURL * in the public API).
- This work clarifies and separates the transfers from the connections
better.
- We should avoid "conn->data". Since individual connections can be used
by many transfers when multiplexing, making sure that conn->data
points to the current and correct transfer at all times is difficult
and has been notoriously error-prone over the years. The goal is to
ultimately remove the conn->data pointer for this reason.
Closes#6425
These two files were always tightly connected and it was hard to
understand what went into which. This also allows us to make the
ftpsend() function static (moved from ftp.c).
Removed security.c
Renamed curl_sec.h to krb5.h
Closes#5987
Some editors and IDEs assume that source files use UTF-8 file encodings.
It also fixes the build with MSVC when /utf-8 command line option is
used (this option is mandatory for some other open-source projects, this
is useful when using the same options is desired for building all
libraries of a project).
Closes https://github.com/curl/curl/pull/4087
Even though the variable was used in a DEBUGASSERT, GCC 8 warned in
debug mode:
krb5.c:324:17: error: unused variable 'maj' [-Werror=unused-variable]
Just suppress the warning and declare the variable unconditionally
instead of only for DEBUGBUILD (which also missed the check for
HAVE_ASSERT_H).
Closes https://github.com/curl/curl/pull/4020
The failf() macro is the name used for invoking Curl_failf(). While
there isn't a way to turn off failf like there is for infof, but it's
still a good idea to use the macro.
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
gss_seal/gss_unseal have been deprecated in favor of
gss_wrap/gss_unwrap with GSS-API v2 from January 1997 [1]. The first
version of "The Kerberos Version 5 GSS-API Mechanism" [2] from June
1996 already says "GSS_Wrap() (formerly GSS_Seal())" and
"GSS_Unwrap() (formerly GSS_Unseal())".
Use the nondeprecated functions to avoid deprecation warnings.
[1] https://tools.ietf.org/html/rfc2078
[2] https://tools.ietf.org/html/rfc1964
Closes https://github.com/curl/curl/pull/2356
... it no longer takes printf() arguments since it was only really taken
advantage by one user and it was not written and used in a safe
way. Thus the 'f' is removed from the function name and the proto is
changed.
Although the current code wouldn't end up in badness, it was a risk that
future changes could end up springf()ing too large data or passing in a
format string inadvertently.
curl_printf.h defines printf to curl_mprintf, etc. This can cause
problems with external headers which may use
__attribute__((format(printf, ...))) markers etc.
To avoid that they cause problems with system includes, we include
curl_printf.h after any system headers. That makes the three last
headers to always be, and we keep them in this order:
curl_printf.h
curl_memory.h
memdebug.h
None of them include system headers, they all do funny #defines.
Reported-by: David Benjamin
Fixes#743
This header file must be included after all header files except
memdebug.h, as it does similar memory function redefinitions and can be
similarly affected by conflicting definitions in system or dependent
library headers.
Coverity CID 1241957. Removed the unused argument. As this struct and
pointer now are used only for krb5, there's no need to keep unused
function arguments around.
