/*************************************************************************** * _ _ ____ _ * Project ___| | | | _ \| | * / __| | | | |_) | | * | (__| |_| | _ <| |___ * \___|\___/|_| \_\_____| * * Copyright (C) 1998 - 2022, Daniel Stenberg, , et al. * * This software is licensed as described in the file COPYING, which * you should have received as part of this distribution. The terms * are also available at https://curl.se/docs/copyright.html. * * You may opt to use, copy, modify, merge, publish, distribute and/or sell * copies of the Software, and permit persons to whom the Software is * furnished to do so, under the terms of the COPYING file. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * * SPDX-License-Identifier: curl * ***************************************************************************/ /* * Source file for all OpenSSL-specific code for the TLS/SSL layer. No code * but vtls.c should ever call or use these functions. */ #include "curl_setup.h" #if defined(USE_QUICHE) || defined(USE_OPENSSL) #include /* Wincrypt must be included before anything that could include OpenSSL. */ #if defined(USE_WIN32_CRYPTO) #include /* Undefine wincrypt conflicting symbols for BoringSSL. */ #undef X509_NAME #undef X509_EXTENSIONS #undef PKCS7_ISSUER_AND_SERIAL #undef PKCS7_SIGNER_INFO #undef OCSP_REQUEST #undef OCSP_RESPONSE #endif #include "urldata.h" #include "sendf.h" #include "formdata.h" /* for the boundary function */ #include "url.h" /* for the ssl config check function */ #include "inet_pton.h" #include "openssl.h" #include "connect.h" #include "slist.h" #include "select.h" #include "vtls.h" #include "vauth/vauth.h" #include "keylog.h" #include "strcase.h" #include "hostcheck.h" #include "multiif.h" #include "strerror.h" #include "curl_printf.h" #include #include #include #ifndef OPENSSL_NO_DSA #include #endif #include #include #include #include #include #include #include #include #include #if (OPENSSL_VERSION_NUMBER >= 0x0090808fL) && !defined(OPENSSL_NO_OCSP) #include #endif #if (OPENSSL_VERSION_NUMBER >= 0x0090700fL) && /* 0.9.7 or later */ \ !defined(OPENSSL_NO_ENGINE) && !defined(OPENSSL_NO_UI_CONSOLE) #define USE_OPENSSL_ENGINE #include #endif #include "warnless.h" /* The last #include files should be: */ #include "curl_memory.h" #include "memdebug.h" /* Uncomment the ALLOW_RENEG line to a real #define if you want to allow TLS renegotiations when built with BoringSSL. Renegotiating is non-compliant with HTTP/2 and "an extremely dangerous protocol feature". Beware. #define ALLOW_RENEG 1 */ #ifndef OPENSSL_VERSION_NUMBER #error "OPENSSL_VERSION_NUMBER not defined" #endif #ifdef USE_OPENSSL_ENGINE #include #endif #if OPENSSL_VERSION_NUMBER >= 0x00909000L #define SSL_METHOD_QUAL const #else #define SSL_METHOD_QUAL #endif #if (OPENSSL_VERSION_NUMBER >= 0x10000000L) #define HAVE_ERR_REMOVE_THREAD_STATE 1 #endif #if (OPENSSL_VERSION_NUMBER >= 0x10100000L) && /* OpenSSL 1.1.0+ */ \ !(defined(LIBRESSL_VERSION_NUMBER) && \ LIBRESSL_VERSION_NUMBER < 0x20700000L) #define SSLEAY_VERSION_NUMBER OPENSSL_VERSION_NUMBER #define HAVE_X509_GET0_EXTENSIONS 1 /* added in 1.1.0 -pre1 */ #define HAVE_OPAQUE_EVP_PKEY 1 /* since 1.1.0 -pre3 */ #define HAVE_OPAQUE_RSA_DSA_DH 1 /* since 1.1.0 -pre5 */ #define CONST_EXTS const #define HAVE_ERR_REMOVE_THREAD_STATE_DEPRECATED 1 /* funny typecast define due to difference in API */ #ifdef LIBRESSL_VERSION_NUMBER #define ARG2_X509_signature_print (X509_ALGOR *) #else #define ARG2_X509_signature_print #endif #else /* For OpenSSL before 1.1.0 */ #define ASN1_STRING_get0_data(x) ASN1_STRING_data(x) #define X509_get0_notBefore(x) X509_get_notBefore(x) #define X509_get0_notAfter(x) X509_get_notAfter(x) #define CONST_EXTS /* nope */ #ifndef LIBRESSL_VERSION_NUMBER #define OpenSSL_version_num() SSLeay() #endif #endif #if (OPENSSL_VERSION_NUMBER >= 0x1000200fL) && /* 1.0.2 or later */ \ !(defined(LIBRESSL_VERSION_NUMBER) && \ LIBRESSL_VERSION_NUMBER < 0x20700000L) #define HAVE_X509_GET0_SIGNATURE 1 #endif #if (OPENSSL_VERSION_NUMBER >= 0x1000200fL) /* 1.0.2 or later */ #define HAVE_SSL_GET_SHUTDOWN 1 #endif #if OPENSSL_VERSION_NUMBER >= 0x10002003L && \ OPENSSL_VERSION_NUMBER <= 0x10002FFFL && \ !defined(OPENSSL_NO_COMP) #define HAVE_SSL_COMP_FREE_COMPRESSION_METHODS 1 #endif #if (OPENSSL_VERSION_NUMBER < 0x0090808fL) /* not present in older OpenSSL */ #define OPENSSL_load_builtin_modules(x) #endif #if (OPENSSL_VERSION_NUMBER >= 0x30000000L) #define HAVE_EVP_PKEY_GET_PARAMS 1 #else #define SSL_get1_peer_certificate SSL_get_peer_certificate #endif #ifdef HAVE_EVP_PKEY_GET_PARAMS #include #define DECLARE_PKEY_PARAM_BIGNUM(name) BIGNUM *name = NULL #define FREE_PKEY_PARAM_BIGNUM(name) BN_clear_free(name) #else #define DECLARE_PKEY_PARAM_BIGNUM(name) const BIGNUM *name #define FREE_PKEY_PARAM_BIGNUM(name) #endif /* * Whether SSL_CTX_set_keylog_callback is available. * OpenSSL: supported since 1.1.1 https://github.com/openssl/openssl/pull/2287 * BoringSSL: supported since d28f59c27bac (committed 2015-11-19) * LibreSSL: unsupported in at least 2.7.2 (explicitly check for it since it * lies and pretends to be OpenSSL 2.0.0). */ #if (OPENSSL_VERSION_NUMBER >= 0x10101000L && \ !defined(LIBRESSL_VERSION_NUMBER)) || \ defined(OPENSSL_IS_BORINGSSL) #define HAVE_KEYLOG_CALLBACK #endif /* Whether SSL_CTX_set_ciphersuites is available. * OpenSSL: supported since 1.1.1 (commit a53b5be6a05) * BoringSSL: no * LibreSSL: no */ #if ((OPENSSL_VERSION_NUMBER >= 0x10101000L) && \ !defined(LIBRESSL_VERSION_NUMBER) && \ !defined(OPENSSL_IS_BORINGSSL)) #define HAVE_SSL_CTX_SET_CIPHERSUITES #define HAVE_SSL_CTX_SET_POST_HANDSHAKE_AUTH #endif /* * Whether SSL_CTX_set1_curves_list is available. * OpenSSL: supported since 1.0.2, see * https://www.openssl.org/docs/manmaster/man3/SSL_CTX_set1_groups.html * BoringSSL: supported since 5fd1807d95f7 (committed 2016-09-30) * LibreSSL: since 2.5.3 (April 12, 2017) */ #if (OPENSSL_VERSION_NUMBER >= 0x10002000L) || \ defined(OPENSSL_IS_BORINGSSL) #define HAVE_SSL_CTX_SET_EC_CURVES #endif #if defined(LIBRESSL_VERSION_NUMBER) #define OSSL_PACKAGE "LibreSSL" #elif defined(OPENSSL_IS_BORINGSSL) #define OSSL_PACKAGE "BoringSSL" #else #define OSSL_PACKAGE "OpenSSL" #endif #if (OPENSSL_VERSION_NUMBER >= 0x10100000L) /* up2date versions of OpenSSL maintain reasonably secure defaults without * breaking compatibility, so it is better not to override the defaults in curl */ #define DEFAULT_CIPHER_SELECTION NULL #else /* ... but it is not the case with old versions of OpenSSL */ #define DEFAULT_CIPHER_SELECTION \ "ALL:!EXPORT:!EXPORT40:!EXPORT56:!aNULL:!LOW:!RC4:@STRENGTH" #endif #ifdef HAVE_OPENSSL_SRP /* the function exists */ #ifdef USE_TLS_SRP /* the functionality is not disabled */ #define USE_OPENSSL_SRP #endif #endif #if (OPENSSL_VERSION_NUMBER >= 0x10100000L) #define HAVE_RANDOM_INIT_BY_DEFAULT 1 #endif #if (OPENSSL_VERSION_NUMBER >= 0x10100000L) && \ !(defined(LIBRESSL_VERSION_NUMBER) && \ LIBRESSL_VERSION_NUMBER < 0x2070100fL) && \ !defined(OPENSSL_IS_BORINGSSL) #define HAVE_OPENSSL_VERSION #endif /* * Whether the OpenSSL version has the API needed to support sharing an * X509_STORE between connections. The API is: * * `X509_STORE_up_ref` -- Introduced: OpenSSL 1.1.0. */ #if (OPENSSL_VERSION_NUMBER >= 0x10100000L) /* OpenSSL >= 1.1.0 */ #define HAVE_SSL_X509_STORE_SHARE #endif struct ssl_backend_data { struct Curl_easy *logger; /* transfer handle to pass trace logs to, only using sockindex 0 */ /* these ones requires specific SSL-types */ SSL_CTX* ctx; SSL* handle; X509* server_cert; #ifndef HAVE_KEYLOG_CALLBACK /* Set to true once a valid keylog entry has been created to avoid dupes. */ bool keylog_done; #endif }; #if defined(HAVE_SSL_X509_STORE_SHARE) struct multi_ssl_backend_data { char *CAfile; /* CAfile path used to generate X509 store */ X509_STORE *store; /* cached X509 store or NULL if none */ struct curltime time; /* when the cached store was created */ }; #endif /* HAVE_SSL_X509_STORE_SHARE */ #define push_certinfo(_label, _num) \ do { \ long info_len = BIO_get_mem_data(mem, &ptr); \ Curl_ssl_push_certinfo_len(data, _num, _label, ptr, info_len); \ if(1 != BIO_reset(mem)) \ break; \ } while(0) static void pubkey_show(struct Curl_easy *data, BIO *mem, int num, const char *type, const char *name, const BIGNUM *bn) { char *ptr; char namebuf[32]; msnprintf(namebuf, sizeof(namebuf), "%s(%s)", type, name); if(bn) BN_print(mem, bn); push_certinfo(namebuf, num); } #ifdef HAVE_OPAQUE_RSA_DSA_DH #define print_pubkey_BN(_type, _name, _num) \ pubkey_show(data, mem, _num, #_type, #_name, _name) #else #define print_pubkey_BN(_type, _name, _num) \ do { \ if(_type->_name) { \ pubkey_show(data, mem, _num, #_type, #_name, _type->_name); \ } \ } while(0) #endif static int asn1_object_dump(ASN1_OBJECT *a, char *buf, size_t len) { int i, ilen; ilen = (int)len; if(ilen < 0) return 1; /* buffer too big */ i = i2t_ASN1_OBJECT(buf, ilen, a); if(i >= ilen) return 1; /* buffer too small */ return 0; } static void X509V3_ext(struct Curl_easy *data, int certnum, CONST_EXTS STACK_OF(X509_EXTENSION) *exts) { int i; if((int)sk_X509_EXTENSION_num(exts) <= 0) /* no extensions, bail out */ return; for(i = 0; i < (int)sk_X509_EXTENSION_num(exts); i++) { ASN1_OBJECT *obj; X509_EXTENSION *ext = sk_X509_EXTENSION_value(exts, i); BUF_MEM *biomem; char namebuf[128]; BIO *bio_out = BIO_new(BIO_s_mem()); if(!bio_out) return; obj = X509_EXTENSION_get_object(ext); asn1_object_dump(obj, namebuf, sizeof(namebuf)); if(!X509V3_EXT_print(bio_out, ext, 0, 0)) ASN1_STRING_print(bio_out, (ASN1_STRING *)X509_EXTENSION_get_data(ext)); BIO_get_mem_ptr(bio_out, &biomem); Curl_ssl_push_certinfo_len(data, certnum, namebuf, biomem->data, biomem->length); BIO_free(bio_out); } } #ifdef OPENSSL_IS_BORINGSSL typedef size_t numcert_t; #else typedef int numcert_t; #endif CURLcode Curl_ossl_certchain(struct Curl_easy *data, SSL *ssl) { CURLcode result; STACK_OF(X509) *sk; int i; numcert_t numcerts; BIO *mem; DEBUGASSERT(ssl); sk = SSL_get_peer_cert_chain(ssl); if(!sk) { return CURLE_OUT_OF_MEMORY; } numcerts = sk_X509_num(sk); result = Curl_ssl_init_certinfo(data, (int)numcerts); if(result) { return result; } mem = BIO_new(BIO_s_mem()); if(!mem) { return CURLE_OUT_OF_MEMORY; } for(i = 0; i < (int)numcerts; i++) { ASN1_INTEGER *num; X509 *x = sk_X509_value(sk, i); EVP_PKEY *pubkey = NULL; int j; char *ptr; const ASN1_BIT_STRING *psig = NULL; X509_NAME_print_ex(mem, X509_get_subject_name(x), 0, XN_FLAG_ONELINE); push_certinfo("Subject", i); X509_NAME_print_ex(mem, X509_get_issuer_name(x), 0, XN_FLAG_ONELINE); push_certinfo("Issuer", i); BIO_printf(mem, "%lx", X509_get_version(x)); push_certinfo("Version", i); num = X509_get_serialNumber(x); if(num->type == V_ASN1_NEG_INTEGER) BIO_puts(mem, "-"); for(j = 0; j < num->length; j++) BIO_printf(mem, "%02x", num->data[j]); push_certinfo("Serial Number", i); #if defined(HAVE_X509_GET0_SIGNATURE) && defined(HAVE_X509_GET0_EXTENSIONS) { const X509_ALGOR *sigalg = NULL; X509_PUBKEY *xpubkey = NULL; ASN1_OBJECT *pubkeyoid = NULL; X509_get0_signature(&psig, &sigalg, x); if(sigalg) { i2a_ASN1_OBJECT(mem, sigalg->algorithm); push_certinfo("Signature Algorithm", i); } xpubkey = X509_get_X509_PUBKEY(x); if(xpubkey) { X509_PUBKEY_get0_param(&pubkeyoid, NULL, NULL, NULL, xpubkey); if(pubkeyoid) { i2a_ASN1_OBJECT(mem, pubkeyoid); push_certinfo("Public Key Algorithm", i); } } X509V3_ext(data, i, X509_get0_extensions(x)); } #else { /* before OpenSSL 1.0.2 */ X509_CINF *cinf = x->cert_info; i2a_ASN1_OBJECT(mem, cinf->signature->algorithm); push_certinfo("Signature Algorithm", i); i2a_ASN1_OBJECT(mem, cinf->key->algor->algorithm); push_certinfo("Public Key Algorithm", i); X509V3_ext(data, i, cinf->extensions); psig = x->signature; } #endif ASN1_TIME_print(mem, X509_get0_notBefore(x)); push_certinfo("Start date", i); ASN1_TIME_print(mem, X509_get0_notAfter(x)); push_certinfo("Expire date", i); pubkey = X509_get_pubkey(x); if(!pubkey) infof(data, " Unable to load public key"); else { int pktype; #ifdef HAVE_OPAQUE_EVP_PKEY pktype = EVP_PKEY_id(pubkey); #else pktype = pubkey->type; #endif switch(pktype) { case EVP_PKEY_RSA: { #ifndef HAVE_EVP_PKEY_GET_PARAMS RSA *rsa; #ifdef HAVE_OPAQUE_EVP_PKEY rsa = EVP_PKEY_get0_RSA(pubkey); #else rsa = pubkey->pkey.rsa; #endif /* HAVE_OPAQUE_EVP_PKEY */ #endif /* !HAVE_EVP_PKEY_GET_PARAMS */ { #ifdef HAVE_OPAQUE_RSA_DSA_DH DECLARE_PKEY_PARAM_BIGNUM(n); DECLARE_PKEY_PARAM_BIGNUM(e); #ifdef HAVE_EVP_PKEY_GET_PARAMS EVP_PKEY_get_bn_param(pubkey, OSSL_PKEY_PARAM_RSA_N, &n); EVP_PKEY_get_bn_param(pubkey, OSSL_PKEY_PARAM_RSA_E, &e); #else RSA_get0_key(rsa, &n, &e, NULL); #endif /* HAVE_EVP_PKEY_GET_PARAMS */ BIO_printf(mem, "%d", BN_num_bits(n)); #else BIO_printf(mem, "%d", BN_num_bits(rsa->n)); #endif /* HAVE_OPAQUE_RSA_DSA_DH */ push_certinfo("RSA Public Key", i); print_pubkey_BN(rsa, n, i); print_pubkey_BN(rsa, e, i); FREE_PKEY_PARAM_BIGNUM(n); FREE_PKEY_PARAM_BIGNUM(e); } break; } case EVP_PKEY_DSA: { #ifndef OPENSSL_NO_DSA #ifndef HAVE_EVP_PKEY_GET_PARAMS DSA *dsa; #ifdef HAVE_OPAQUE_EVP_PKEY dsa = EVP_PKEY_get0_DSA(pubkey); #else dsa = pubkey->pkey.dsa; #endif /* HAVE_OPAQUE_EVP_PKEY */ #endif /* !HAVE_EVP_PKEY_GET_PARAMS */ { #ifdef HAVE_OPAQUE_RSA_DSA_DH DECLARE_PKEY_PARAM_BIGNUM(p); DECLARE_PKEY_PARAM_BIGNUM(q); DECLARE_PKEY_PARAM_BIGNUM(g); DECLARE_PKEY_PARAM_BIGNUM(pub_key); #ifdef HAVE_EVP_PKEY_GET_PARAMS EVP_PKEY_get_bn_param(pubkey, OSSL_PKEY_PARAM_FFC_P, &p); EVP_PKEY_get_bn_param(pubkey, OSSL_PKEY_PARAM_FFC_Q, &q); EVP_PKEY_get_bn_param(pubkey, OSSL_PKEY_PARAM_FFC_G, &g); EVP_PKEY_get_bn_param(pubkey, OSSL_PKEY_PARAM_PUB_KEY, &pub_key); #else DSA_get0_pqg(dsa, &p, &q, &g); DSA_get0_key(dsa, &pub_key, NULL); #endif /* HAVE_EVP_PKEY_GET_PARAMS */ #endif /* HAVE_OPAQUE_RSA_DSA_DH */ print_pubkey_BN(dsa, p, i); print_pubkey_BN(dsa, q, i); print_pubkey_BN(dsa, g, i); print_pubkey_BN(dsa, pub_key, i); FREE_PKEY_PARAM_BIGNUM(p); FREE_PKEY_PARAM_BIGNUM(q); FREE_PKEY_PARAM_BIGNUM(g); FREE_PKEY_PARAM_BIGNUM(pub_key); } #endif /* !OPENSSL_NO_DSA */ break; } case EVP_PKEY_DH: { #ifndef HAVE_EVP_PKEY_GET_PARAMS DH *dh; #ifdef HAVE_OPAQUE_EVP_PKEY dh = EVP_PKEY_get0_DH(pubkey); #else dh = pubkey->pkey.dh; #endif /* HAVE_OPAQUE_EVP_PKEY */ #endif /* !HAVE_EVP_PKEY_GET_PARAMS */ { #ifdef HAVE_OPAQUE_RSA_DSA_DH DECLARE_PKEY_PARAM_BIGNUM(p); DECLARE_PKEY_PARAM_BIGNUM(q); DECLARE_PKEY_PARAM_BIGNUM(g); DECLARE_PKEY_PARAM_BIGNUM(pub_key); #ifdef HAVE_EVP_PKEY_GET_PARAMS EVP_PKEY_get_bn_param(pubkey, OSSL_PKEY_PARAM_FFC_P, &p); EVP_PKEY_get_bn_param(pubkey, OSSL_PKEY_PARAM_FFC_Q, &q); EVP_PKEY_get_bn_param(pubkey, OSSL_PKEY_PARAM_FFC_G, &g); EVP_PKEY_get_bn_param(pubkey, OSSL_PKEY_PARAM_PUB_KEY, &pub_key); #else DH_get0_pqg(dh, &p, &q, &g); DH_get0_key(dh, &pub_key, NULL); #endif /* HAVE_EVP_PKEY_GET_PARAMS */ print_pubkey_BN(dh, p, i); print_pubkey_BN(dh, q, i); print_pubkey_BN(dh, g, i); #else print_pubkey_BN(dh, p, i); print_pubkey_BN(dh, g, i); #endif /* HAVE_OPAQUE_RSA_DSA_DH */ print_pubkey_BN(dh, pub_key, i); FREE_PKEY_PARAM_BIGNUM(p); FREE_PKEY_PARAM_BIGNUM(q); FREE_PKEY_PARAM_BIGNUM(g); FREE_PKEY_PARAM_BIGNUM(pub_key); } break; } } EVP_PKEY_free(pubkey); } if(psig) { for(j = 0; j < psig->length; j++) BIO_printf(mem, "%02x:", psig->data[j]); push_certinfo("Signature", i); } PEM_write_bio_X509(mem, x); push_certinfo("Cert", i); } BIO_free(mem); return CURLE_OK; } #endif /* quiche or OpenSSL */ #ifdef USE_OPENSSL static bool ossl_associate_connection(struct Curl_easy *data, struct connectdata *conn, int sockindex); /* * Number of bytes to read from the random number seed file. This must be * a finite value (because some entropy "files" like /dev/urandom have * an infinite length), but must be large enough to provide enough * entropy to properly seed OpenSSL's PRNG. */ #define RAND_LOAD_LENGTH 1024 #ifdef HAVE_KEYLOG_CALLBACK static void ossl_keylog_callback(const SSL *ssl, const char *line) { (void)ssl; Curl_tls_keylog_write_line(line); } #else /* * ossl_log_tls12_secret is called by libcurl to make the CLIENT_RANDOMs if the * OpenSSL being used doesn't have native support for doing that. */ static void ossl_log_tls12_secret(const SSL *ssl, bool *keylog_done) { const SSL_SESSION *session = SSL_get_session(ssl); unsigned char client_random[SSL3_RANDOM_SIZE]; unsigned char master_key[SSL_MAX_MASTER_KEY_LENGTH]; int master_key_length = 0; if(!session || *keylog_done) return; #if OPENSSL_VERSION_NUMBER >= 0x10100000L && \ !(defined(LIBRESSL_VERSION_NUMBER) && \ LIBRESSL_VERSION_NUMBER < 0x20700000L) /* ssl->s3 is not checked in openssl 1.1.0-pre6, but let's assume that * we have a valid SSL context if we have a non-NULL session. */ SSL_get_client_random(ssl, client_random, SSL3_RANDOM_SIZE); master_key_length = (int) SSL_SESSION_get_master_key(session, master_key, SSL_MAX_MASTER_KEY_LENGTH); #else if(ssl->s3 && session->master_key_length > 0) { master_key_length = session->master_key_length; memcpy(master_key, session->master_key, session->master_key_length); memcpy(client_random, ssl->s3->client_random, SSL3_RANDOM_SIZE); } #endif /* The handshake has not progressed sufficiently yet, or this is a TLS 1.3 * session (when curl was built with older OpenSSL headers and running with * newer OpenSSL runtime libraries). */ if(master_key_length <= 0) return; *keylog_done = true; Curl_tls_keylog_write("CLIENT_RANDOM", client_random, master_key, master_key_length); } #endif /* !HAVE_KEYLOG_CALLBACK */ static const char *SSL_ERROR_to_str(int err) { switch(err) { case SSL_ERROR_NONE: return "SSL_ERROR_NONE"; case SSL_ERROR_SSL: return "SSL_ERROR_SSL"; case SSL_ERROR_WANT_READ: return "SSL_ERROR_WANT_READ"; case SSL_ERROR_WANT_WRITE: return "SSL_ERROR_WANT_WRITE"; case SSL_ERROR_WANT_X509_LOOKUP: return "SSL_ERROR_WANT_X509_LOOKUP"; case SSL_ERROR_SYSCALL: return "SSL_ERROR_SYSCALL"; case SSL_ERROR_ZERO_RETURN: return "SSL_ERROR_ZERO_RETURN"; case SSL_ERROR_WANT_CONNECT: return "SSL_ERROR_WANT_CONNECT"; case SSL_ERROR_WANT_ACCEPT: return "SSL_ERROR_WANT_ACCEPT"; #if defined(SSL_ERROR_WANT_ASYNC) case SSL_ERROR_WANT_ASYNC: return "SSL_ERROR_WANT_ASYNC"; #endif #if defined(SSL_ERROR_WANT_ASYNC_JOB) case SSL_ERROR_WANT_ASYNC_JOB: return "SSL_ERROR_WANT_ASYNC_JOB"; #endif #if defined(SSL_ERROR_WANT_EARLY) case SSL_ERROR_WANT_EARLY: return "SSL_ERROR_WANT_EARLY"; #endif default: return "SSL_ERROR unknown"; } } /* Return error string for last OpenSSL error */ static char *ossl_strerror(unsigned long error, char *buf, size_t size) { if(size) *buf = '\0'; #ifdef OPENSSL_IS_BORINGSSL ERR_error_string_n((uint32_t)error, buf, size); #else ERR_error_string_n(error, buf, size); #endif if(size > 1 && !*buf) { strncpy(buf, (error ? "Unknown error" : "No error"), size); buf[size - 1] = '\0'; } return buf; } /* Return an extra data index for the transfer data. * This index can be used with SSL_get_ex_data() and SSL_set_ex_data(). */ static int ossl_get_ssl_data_index(void) { static int ssl_ex_data_data_index = -1; if(ssl_ex_data_data_index < 0) { ssl_ex_data_data_index = SSL_get_ex_new_index(0, NULL, NULL, NULL, NULL); } return ssl_ex_data_data_index; } /* Return an extra data index for the connection data. * This index can be used with SSL_get_ex_data() and SSL_set_ex_data(). */ static int ossl_get_ssl_conn_index(void) { static int ssl_ex_data_conn_index = -1; if(ssl_ex_data_conn_index < 0) { ssl_ex_data_conn_index = SSL_get_ex_new_index(0, NULL, NULL, NULL, NULL); } return ssl_ex_data_conn_index; } /* Return an extra data index for the sockindex. * This index can be used with SSL_get_ex_data() and SSL_set_ex_data(). */ static int ossl_get_ssl_sockindex_index(void) { static int sockindex_index = -1; if(sockindex_index < 0) { sockindex_index = SSL_get_ex_new_index(0, NULL, NULL, NULL, NULL); } return sockindex_index; } /* Return an extra data index for proxy boolean. * This index can be used with SSL_get_ex_data() and SSL_set_ex_data(). */ static int ossl_get_proxy_index(void) { static int proxy_index = -1; if(proxy_index < 0) { proxy_index = SSL_get_ex_new_index(0, NULL, NULL, NULL, NULL); } return proxy_index; } static int passwd_callback(char *buf, int num, int encrypting, void *global_passwd) { DEBUGASSERT(0 == encrypting); if(!encrypting) { int klen = curlx_uztosi(strlen((char *)global_passwd)); if(num > klen) { memcpy(buf, global_passwd, klen + 1); return klen; } } return 0; } /* * rand_enough() returns TRUE if we have seeded the random engine properly. */ static bool rand_enough(void) { return (0 != RAND_status()) ? TRUE : FALSE; } static CURLcode ossl_seed(struct Curl_easy *data) { /* This might get called before it has been added to a multi handle */ if(data->multi && data->multi->ssl_seeded) return CURLE_OK; if(rand_enough()) { /* OpenSSL 1.1.0+ should return here */ if(data->multi) data->multi->ssl_seeded = TRUE; return CURLE_OK; } #ifdef HAVE_RANDOM_INIT_BY_DEFAULT /* with OpenSSL 1.1.0+, a failed RAND_status is a showstopper */ failf(data, "Insufficient randomness"); return CURLE_SSL_CONNECT_ERROR; #else #ifdef RANDOM_FILE RAND_load_file(RANDOM_FILE, RAND_LOAD_LENGTH); if(rand_enough()) return CURLE_OK; #endif #if defined(HAVE_RAND_EGD) && defined(EGD_SOCKET) /* available in OpenSSL 0.9.5 and later */ /* EGD_SOCKET is set at configure time or not at all */ { /* If there's an option and a define, the option overrides the define */ int ret = RAND_egd(EGD_SOCKET); if(-1 != ret) { if(rand_enough()) return CURLE_OK; } } #endif /* fallback to a custom seeding of the PRNG using a hash based on a current time */ do { unsigned char randb[64]; size_t len = sizeof(randb); size_t i, i_max; for(i = 0, i_max = len / sizeof(struct curltime); i < i_max; ++i) { struct curltime tv = Curl_now(); Curl_wait_ms(1); tv.tv_sec *= i + 1; tv.tv_usec *= (unsigned int)i + 2; tv.tv_sec ^= ((Curl_now().tv_sec + Curl_now().tv_usec) * (i + 3)) << 8; tv.tv_usec ^= (unsigned int) ((Curl_now().tv_sec + Curl_now().tv_usec) * (i + 4)) << 16; memcpy(&randb[i * sizeof(struct curltime)], &tv, sizeof(struct curltime)); } RAND_add(randb, (int)len, (double)len/2); } while(!rand_enough()); { /* generates a default path for the random seed file */ char fname[256]; fname[0] = 0; /* blank it first */ RAND_file_name(fname, sizeof(fname)); if(fname[0]) { /* we got a file name to try */ RAND_load_file(fname, RAND_LOAD_LENGTH); if(rand_enough()) return CURLE_OK; } } infof(data, "libcurl is now using a weak random seed"); return (rand_enough() ? CURLE_OK : CURLE_SSL_CONNECT_ERROR /* confusing error code */); #endif } #ifndef SSL_FILETYPE_ENGINE #define SSL_FILETYPE_ENGINE 42 #endif #ifndef SSL_FILETYPE_PKCS12 #define SSL_FILETYPE_PKCS12 43 #endif static int do_file_type(const char *type) { if(!type || !type[0]) return SSL_FILETYPE_PEM; if(strcasecompare(type, "PEM")) return SSL_FILETYPE_PEM; if(strcasecompare(type, "DER")) return SSL_FILETYPE_ASN1; if(strcasecompare(type, "ENG")) return SSL_FILETYPE_ENGINE; if(strcasecompare(type, "P12")) return SSL_FILETYPE_PKCS12; return -1; } #ifdef USE_OPENSSL_ENGINE /* * Supply default password to the engine user interface conversation. * The password is passed by OpenSSL engine from ENGINE_load_private_key() * last argument to the ui and can be obtained by UI_get0_user_data(ui) here. */ static int ssl_ui_reader(UI *ui, UI_STRING *uis) { const char *password; switch(UI_get_string_type(uis)) { case UIT_PROMPT: case UIT_VERIFY: password = (const char *)UI_get0_user_data(ui); if(password && (UI_get_input_flags(uis) & UI_INPUT_FLAG_DEFAULT_PWD)) { UI_set_result(ui, uis, password); return 1; } default: break; } return (UI_method_get_reader(UI_OpenSSL()))(ui, uis); } /* * Suppress interactive request for a default password if available. */ static int ssl_ui_writer(UI *ui, UI_STRING *uis) { switch(UI_get_string_type(uis)) { case UIT_PROMPT: case UIT_VERIFY: if(UI_get0_user_data(ui) && (UI_get_input_flags(uis) & UI_INPUT_FLAG_DEFAULT_PWD)) { return 1; } default: break; } return (UI_method_get_writer(UI_OpenSSL()))(ui, uis); } /* * Check if a given string is a PKCS#11 URI */ static bool is_pkcs11_uri(const char *string) { return (string && strncasecompare(string, "pkcs11:", 7)); } #endif static CURLcode ossl_set_engine(struct Curl_easy *data, const char *engine); static int SSL_CTX_use_certificate_blob(SSL_CTX *ctx, const struct curl_blob *blob, int type, const char *key_passwd) { int ret = 0; X509 *x = NULL; /* the typecast of blob->len is fine since it is guaranteed to never be larger than CURL_MAX_INPUT_LENGTH */ BIO *in = BIO_new_mem_buf(blob->data, (int)(blob->len)); if(!in) return CURLE_OUT_OF_MEMORY; if(type == SSL_FILETYPE_ASN1) { /* j = ERR_R_ASN1_LIB; */ x = d2i_X509_bio(in, NULL); } else if(type == SSL_FILETYPE_PEM) { /* ERR_R_PEM_LIB; */ x = PEM_read_bio_X509(in, NULL, passwd_callback, (void *)key_passwd); } else { ret = 0; goto end; } if(!x) { ret = 0; goto end; } ret = SSL_CTX_use_certificate(ctx, x); end: X509_free(x); BIO_free(in); return ret; } static int SSL_CTX_use_PrivateKey_blob(SSL_CTX *ctx, const struct curl_blob *blob, int type, const char *key_passwd) { int ret = 0; EVP_PKEY *pkey = NULL; BIO *in = BIO_new_mem_buf(blob->data, (int)(blob->len)); if(!in) return CURLE_OUT_OF_MEMORY; if(type == SSL_FILETYPE_PEM) pkey = PEM_read_bio_PrivateKey(in, NULL, passwd_callback, (void *)key_passwd); else if(type == SSL_FILETYPE_ASN1) pkey = d2i_PrivateKey_bio(in, NULL); else { ret = 0; goto end; } if(!pkey) { ret = 0; goto end; } ret = SSL_CTX_use_PrivateKey(ctx, pkey); EVP_PKEY_free(pkey); end: BIO_free(in); return ret; } static int SSL_CTX_use_certificate_chain_blob(SSL_CTX *ctx, const struct curl_blob *blob, const char *key_passwd) { /* SSL_CTX_add1_chain_cert introduced in OpenSSL 1.0.2 */ #if (OPENSSL_VERSION_NUMBER >= 0x1000200fL) && /* OpenSSL 1.0.2 or later */ \ !(defined(LIBRESSL_VERSION_NUMBER) && \ (LIBRESSL_VERSION_NUMBER < 0x2090100fL)) /* LibreSSL 2.9.1 or later */ int ret = 0; X509 *x = NULL; void *passwd_callback_userdata = (void *)key_passwd; BIO *in = BIO_new_mem_buf(blob->data, (int)(blob->len)); if(!in) return CURLE_OUT_OF_MEMORY; ERR_clear_error(); x = PEM_read_bio_X509_AUX(in, NULL, passwd_callback, (void *)key_passwd); if(!x) { ret = 0; goto end; } ret = SSL_CTX_use_certificate(ctx, x); if(ERR_peek_error() != 0) ret = 0; if(ret) { X509 *ca; unsigned long err; if(!SSL_CTX_clear_chain_certs(ctx)) { ret = 0; goto end; } while((ca = PEM_read_bio_X509(in, NULL, passwd_callback, passwd_callback_userdata)) != NULL) { if(!SSL_CTX_add0_chain_cert(ctx, ca)) { X509_free(ca); ret = 0; goto end; } } err = ERR_peek_last_error(); if((ERR_GET_LIB(err) == ERR_LIB_PEM) && (ERR_GET_REASON(err) == PEM_R_NO_START_LINE)) ERR_clear_error(); else ret = 0; } end: X509_free(x); BIO_free(in); return ret; #else (void)ctx; /* unused */ (void)blob; /* unused */ (void)key_passwd; /* unused */ return 0; #endif } static int cert_stuff(struct Curl_easy *data, SSL_CTX* ctx, char *cert_file, const struct curl_blob *cert_blob, const char *cert_type, char *key_file, const struct curl_blob *key_blob, const char *key_type, char *key_passwd) { char error_buffer[256]; bool check_privkey = TRUE; int file_type = do_file_type(cert_type); if(cert_file || cert_blob || (file_type == SSL_FILETYPE_ENGINE)) { SSL *ssl; X509 *x509; int cert_done = 0; int cert_use_result; if(key_passwd) { /* set the password in the callback userdata */ SSL_CTX_set_default_passwd_cb_userdata(ctx, key_passwd); /* Set passwd callback: */ SSL_CTX_set_default_passwd_cb(ctx, passwd_callback); } switch(file_type) { case SSL_FILETYPE_PEM: /* SSL_CTX_use_certificate_chain_file() only works on PEM files */ cert_use_result = cert_blob ? SSL_CTX_use_certificate_chain_blob(ctx, cert_blob, key_passwd) : SSL_CTX_use_certificate_chain_file(ctx, cert_file); if(cert_use_result != 1) { failf(data, "could not load PEM client certificate from %s, " OSSL_PACKAGE " error %s, " "(no key found, wrong pass phrase, or wrong file format?)", (cert_blob ? "CURLOPT_SSLCERT_BLOB" : cert_file), ossl_strerror(ERR_get_error(), error_buffer, sizeof(error_buffer)) ); return 0; } break; case SSL_FILETYPE_ASN1: /* SSL_CTX_use_certificate_file() works with either PEM or ASN1, but we use the case above for PEM so this can only be performed with ASN1 files. */ cert_use_result = cert_blob ? SSL_CTX_use_certificate_blob(ctx, cert_blob, file_type, key_passwd) : SSL_CTX_use_certificate_file(ctx, cert_file, file_type); if(cert_use_result != 1) { failf(data, "could not load ASN1 client certificate from %s, " OSSL_PACKAGE " error %s, " "(no key found, wrong pass phrase, or wrong file format?)", (cert_blob ? "CURLOPT_SSLCERT_BLOB" : cert_file), ossl_strerror(ERR_get_error(), error_buffer, sizeof(error_buffer)) ); return 0; } break; case SSL_FILETYPE_ENGINE: #if defined(USE_OPENSSL_ENGINE) && defined(ENGINE_CTRL_GET_CMD_FROM_NAME) { /* Implicitly use pkcs11 engine if none was provided and the * cert_file is a PKCS#11 URI */ if(!data->state.engine) { if(is_pkcs11_uri(cert_file)) { if(ossl_set_engine(data, "pkcs11") != CURLE_OK) { return 0; } } } if(data->state.engine) { const char *cmd_name = "LOAD_CERT_CTRL"; struct { const char *cert_id; X509 *cert; } params; params.cert_id = cert_file; params.cert = NULL; /* Does the engine supports LOAD_CERT_CTRL ? */ if(!ENGINE_ctrl(data->state.engine, ENGINE_CTRL_GET_CMD_FROM_NAME, 0, (void *)cmd_name, NULL)) { failf(data, "ssl engine does not support loading certificates"); return 0; } /* Load the certificate from the engine */ if(!ENGINE_ctrl_cmd(data->state.engine, cmd_name, 0, ¶ms, NULL, 1)) { failf(data, "ssl engine cannot load client cert with id" " '%s' [%s]", cert_file, ossl_strerror(ERR_get_error(), error_buffer, sizeof(error_buffer))); return 0; } if(!params.cert) { failf(data, "ssl engine didn't initialized the certificate " "properly."); return 0; } if(SSL_CTX_use_certificate(ctx, params.cert) != 1) { failf(data, "unable to set client certificate [%s]", ossl_strerror(ERR_get_error(), error_buffer, sizeof(error_buffer))); return 0; } X509_free(params.cert); /* we don't need the handle any more... */ } else { failf(data, "crypto engine not set, can't load certificate"); return 0; } } break; #else failf(data, "file type ENG for certificate not implemented"); return 0; #endif case SSL_FILETYPE_PKCS12: { BIO *cert_bio = NULL; PKCS12 *p12 = NULL; EVP_PKEY *pri; STACK_OF(X509) *ca = NULL; if(cert_blob) { cert_bio = BIO_new_mem_buf(cert_blob->data, (int)(cert_blob->len)); if(!cert_bio) { failf(data, "BIO_new_mem_buf NULL, " OSSL_PACKAGE " error %s", ossl_strerror(ERR_get_error(), error_buffer, sizeof(error_buffer)) ); return 0; } } else { cert_bio = BIO_new(BIO_s_file()); if(!cert_bio) { failf(data, "BIO_new return NULL, " OSSL_PACKAGE " error %s", ossl_strerror(ERR_get_error(), error_buffer, sizeof(error_buffer)) ); return 0; } if(BIO_read_filename(cert_bio, cert_file) <= 0) { failf(data, "could not open PKCS12 file '%s'", cert_file); BIO_free(cert_bio); return 0; } } p12 = d2i_PKCS12_bio(cert_bio, NULL); BIO_free(cert_bio); if(!p12) { failf(data, "error reading PKCS12 file '%s'", cert_blob ? "(memory blob)" : cert_file); return 0; } PKCS12_PBE_add(); if(!PKCS12_parse(p12, key_passwd, &pri, &x509, &ca)) { failf(data, "could not parse PKCS12 file, check password, " OSSL_PACKAGE " error %s", ossl_strerror(ERR_get_error(), error_buffer, sizeof(error_buffer)) ); PKCS12_free(p12); return 0; } PKCS12_free(p12); if(SSL_CTX_use_certificate(ctx, x509) != 1) { failf(data, "could not load PKCS12 client certificate, " OSSL_PACKAGE " error %s", ossl_strerror(ERR_get_error(), error_buffer, sizeof(error_buffer)) ); goto fail; } if(SSL_CTX_use_PrivateKey(ctx, pri) != 1) { failf(data, "unable to use private key from PKCS12 file '%s'", cert_file); goto fail; } if(!SSL_CTX_check_private_key (ctx)) { failf(data, "private key from PKCS12 file '%s' " "does not match certificate in same file", cert_file); goto fail; } /* Set Certificate Verification chain */ if(ca) { while(sk_X509_num(ca)) { /* * Note that sk_X509_pop() is used below to make sure the cert is * removed from the stack properly before getting passed to * SSL_CTX_add_extra_chain_cert(), which takes ownership. Previously * we used sk_X509_value() instead, but then we'd clean it in the * subsequent sk_X509_pop_free() call. */ X509 *x = sk_X509_pop(ca); if(!SSL_CTX_add_client_CA(ctx, x)) { X509_free(x); failf(data, "cannot add certificate to client CA list"); goto fail; } if(!SSL_CTX_add_extra_chain_cert(ctx, x)) { X509_free(x); failf(data, "cannot add certificate to certificate chain"); goto fail; } } } cert_done = 1; fail: EVP_PKEY_free(pri); X509_free(x509); sk_X509_pop_free(ca, X509_free); if(!cert_done) return 0; /* failure! */ break; } default: failf(data, "not supported file type '%s' for certificate", cert_type); return 0; } if((!key_file) && (!key_blob)) { key_file = cert_file; key_blob = cert_blob; } else file_type = do_file_type(key_type); switch(file_type) { case SSL_FILETYPE_PEM: if(cert_done) break; /* FALLTHROUGH */ case SSL_FILETYPE_ASN1: cert_use_result = key_blob ? SSL_CTX_use_PrivateKey_blob(ctx, key_blob, file_type, key_passwd) : SSL_CTX_use_PrivateKey_file(ctx, key_file, file_type); if(cert_use_result != 1) { failf(data, "unable to set private key file: '%s' type %s", key_file?key_file:"(memory blob)", key_type?key_type:"PEM"); return 0; } break; case SSL_FILETYPE_ENGINE: #ifdef USE_OPENSSL_ENGINE { /* XXXX still needs some work */ EVP_PKEY *priv_key = NULL; /* Implicitly use pkcs11 engine if none was provided and the * key_file is a PKCS#11 URI */ if(!data->state.engine) { if(is_pkcs11_uri(key_file)) { if(ossl_set_engine(data, "pkcs11") != CURLE_OK) { return 0; } } } if(data->state.engine) { UI_METHOD *ui_method = UI_create_method((char *)"curl user interface"); if(!ui_method) { failf(data, "unable do create " OSSL_PACKAGE " user-interface method"); return 0; } UI_method_set_opener(ui_method, UI_method_get_opener(UI_OpenSSL())); UI_method_set_closer(ui_method, UI_method_get_closer(UI_OpenSSL())); UI_method_set_reader(ui_method, ssl_ui_reader); UI_method_set_writer(ui_method, ssl_ui_writer); /* the typecast below was added to please mingw32 */ priv_key = (EVP_PKEY *) ENGINE_load_private_key(data->state.engine, key_file, ui_method, key_passwd); UI_destroy_method(ui_method); if(!priv_key) { failf(data, "failed to load private key from crypto engine"); return 0; } if(SSL_CTX_use_PrivateKey(ctx, priv_key) != 1) { failf(data, "unable to set private key"); EVP_PKEY_free(priv_key); return 0; } EVP_PKEY_free(priv_key); /* we don't need the handle any more... */ } else { failf(data, "crypto engine not set, can't load private key"); return 0; } } break; #else failf(data, "file type ENG for private key not supported"); return 0; #endif case SSL_FILETYPE_PKCS12: if(!cert_done) { failf(data, "file type P12 for private key not supported"); return 0; } break; default: failf(data, "not supported file type for private key"); return 0; } ssl = SSL_new(ctx); if(!ssl) { failf(data, "unable to create an SSL structure"); return 0; } x509 = SSL_get_certificate(ssl); /* This version was provided by Evan Jordan and is supposed to not leak memory as the previous version: */ if(x509) { EVP_PKEY *pktmp = X509_get_pubkey(x509); EVP_PKEY_copy_parameters(pktmp, SSL_get_privatekey(ssl)); EVP_PKEY_free(pktmp); } #if !defined(OPENSSL_NO_RSA) && !defined(OPENSSL_IS_BORINGSSL) && \ !defined(OPENSSL_NO_DEPRECATED_3_0) { /* If RSA is used, don't check the private key if its flags indicate * it doesn't support it. */ EVP_PKEY *priv_key = SSL_get_privatekey(ssl); int pktype; #ifdef HAVE_OPAQUE_EVP_PKEY pktype = EVP_PKEY_id(priv_key); #else pktype = priv_key->type; #endif if(pktype == EVP_PKEY_RSA) { RSA *rsa = EVP_PKEY_get1_RSA(priv_key); if(RSA_flags(rsa) & RSA_METHOD_FLAG_NO_CHECK) check_privkey = FALSE; RSA_free(rsa); /* Decrement reference count */ } } #endif SSL_free(ssl); /* If we are using DSA, we can copy the parameters from * the private key */ if(check_privkey == TRUE) { /* Now we know that a key and cert have been set against * the SSL context */ if(!SSL_CTX_check_private_key(ctx)) { failf(data, "Private key does not match the certificate public key"); return 0; } } } return 1; } CURLcode Curl_ossl_set_client_cert(struct Curl_easy *data, SSL_CTX *ctx, char *cert_file, const struct curl_blob *cert_blob, const char *cert_type, char *key_file, const struct curl_blob *key_blob, const char *key_type, char *key_passwd) { int rv = cert_stuff(data, ctx, cert_file, cert_blob, cert_type, key_file, key_blob, key_type, key_passwd); if(rv != 1) { return CURLE_SSL_CERTPROBLEM; } return CURLE_OK; } /* returns non-zero on failure */ static int x509_name_oneline(X509_NAME *a, char *buf, size_t size) { BIO *bio_out = BIO_new(BIO_s_mem()); BUF_MEM *biomem; int rc; if(!bio_out) return 1; /* alloc failed! */ rc = X509_NAME_print_ex(bio_out, a, 0, XN_FLAG_SEP_SPLUS_SPC); BIO_get_mem_ptr(bio_out, &biomem); if((size_t)biomem->length < size) size = biomem->length; else size--; /* don't overwrite the buffer end */ memcpy(buf, biomem->data, size); buf[size] = 0; BIO_free(bio_out); return !rc; } /** * Global SSL init * * @retval 0 error initializing SSL * @retval 1 SSL initialized successfully */ static int ossl_init(void) { #if (OPENSSL_VERSION_NUMBER >= 0x10100000L) && \ !defined(LIBRESSL_VERSION_NUMBER) const uint64_t flags = #ifdef OPENSSL_INIT_ENGINE_ALL_BUILTIN /* not present in BoringSSL */ OPENSSL_INIT_ENGINE_ALL_BUILTIN | #endif #ifdef CURL_DISABLE_OPENSSL_AUTO_LOAD_CONFIG OPENSSL_INIT_NO_LOAD_CONFIG | #else OPENSSL_INIT_LOAD_CONFIG | #endif 0; OPENSSL_init_ssl(flags, NULL); #else OPENSSL_load_builtin_modules(); #ifdef USE_OPENSSL_ENGINE ENGINE_load_builtin_engines(); #endif /* CONF_MFLAGS_DEFAULT_SECTION was introduced some time between 0.9.8b and 0.9.8e */ #ifndef CONF_MFLAGS_DEFAULT_SECTION #define CONF_MFLAGS_DEFAULT_SECTION 0x0 #endif #ifndef CURL_DISABLE_OPENSSL_AUTO_LOAD_CONFIG CONF_modules_load_file(NULL, NULL, CONF_MFLAGS_DEFAULT_SECTION| CONF_MFLAGS_IGNORE_MISSING_FILE); #endif /* Let's get nice error messages */ SSL_load_error_strings(); /* Init the global ciphers and digests */ if(!SSLeay_add_ssl_algorithms()) return 0; OpenSSL_add_all_algorithms(); #endif Curl_tls_keylog_open(); /* Initialize the extra data indexes */ if(ossl_get_ssl_data_index() < 0 || ossl_get_ssl_conn_index() < 0 || ossl_get_ssl_sockindex_index() < 0 || ossl_get_proxy_index() < 0) return 0; return 1; } /* Global cleanup */ static void ossl_cleanup(void) { #if (OPENSSL_VERSION_NUMBER >= 0x10100000L) && \ !defined(LIBRESSL_VERSION_NUMBER) /* OpenSSL 1.1 deprecates all these cleanup functions and turns them into no-ops in OpenSSL 1.0 compatibility mode */ #else /* Free ciphers and digests lists */ EVP_cleanup(); #ifdef USE_OPENSSL_ENGINE /* Free engine list */ ENGINE_cleanup(); #endif /* Free OpenSSL error strings */ ERR_free_strings(); /* Free thread local error state, destroying hash upon zero refcount */ #ifdef HAVE_ERR_REMOVE_THREAD_STATE ERR_remove_thread_state(NULL); #else ERR_remove_state(0); #endif /* Free all memory allocated by all configuration modules */ CONF_modules_free(); #ifdef HAVE_SSL_COMP_FREE_COMPRESSION_METHODS SSL_COMP_free_compression_methods(); #endif #endif Curl_tls_keylog_close(); } /* * This function is used to determine connection status. * * Return codes: * 1 means the connection is still in place * 0 means the connection has been closed * -1 means the connection status is unknown */ static int ossl_check_cxn(struct connectdata *conn) { /* SSL_peek takes data out of the raw recv buffer without peeking so we use recv MSG_PEEK instead. Bug #795 */ #ifdef MSG_PEEK char buf; ssize_t nread; nread = recv((RECV_TYPE_ARG1)conn->sock[FIRSTSOCKET], (RECV_TYPE_ARG2)&buf, (RECV_TYPE_ARG3)1, (RECV_TYPE_ARG4)MSG_PEEK); if(nread == 0) return 0; /* connection has been closed */ if(nread == 1) return 1; /* connection still in place */ else if(nread == -1) { int err = SOCKERRNO; if(err == EINPROGRESS || #if defined(EAGAIN) && (EAGAIN != EWOULDBLOCK) err == EAGAIN || #endif err == EWOULDBLOCK) return 1; /* connection still in place */ if(err == ECONNRESET || #ifdef ECONNABORTED err == ECONNABORTED || #endif #ifdef ENETDOWN err == ENETDOWN || #endif #ifdef ENETRESET err == ENETRESET || #endif #ifdef ESHUTDOWN err == ESHUTDOWN || #endif #ifdef ETIMEDOUT err == ETIMEDOUT || #endif err == ENOTCONN) return 0; /* connection has been closed */ } #endif return -1; /* connection status unknown */ } /* Selects an OpenSSL crypto engine */ static CURLcode ossl_set_engine(struct Curl_easy *data, const char *engine) { #ifdef USE_OPENSSL_ENGINE ENGINE *e; #if OPENSSL_VERSION_NUMBER >= 0x00909000L e = ENGINE_by_id(engine); #else /* avoid memory leak */ for(e = ENGINE_get_first(); e; e = ENGINE_get_next(e)) { const char *e_id = ENGINE_get_id(e); if(!strcmp(engine, e_id)) break; } #endif if(!e) { failf(data, "SSL Engine '%s' not found", engine); return CURLE_SSL_ENGINE_NOTFOUND; } if(data->state.engine) { ENGINE_finish(data->state.engine); ENGINE_free(data->state.engine); data->state.engine = NULL; } if(!ENGINE_init(e)) { char buf[256]; ENGINE_free(e); failf(data, "Failed to initialise SSL Engine '%s': %s", engine, ossl_strerror(ERR_get_error(), buf, sizeof(buf))); return CURLE_SSL_ENGINE_INITFAILED; } data->state.engine = e; return CURLE_OK; #else (void)engine; failf(data, "SSL Engine not supported"); return CURLE_SSL_ENGINE_NOTFOUND; #endif } /* Sets engine as default for all SSL operations */ static CURLcode ossl_set_engine_default(struct Curl_easy *data) { #ifdef USE_OPENSSL_ENGINE if(data->state.engine) { if(ENGINE_set_default(data->state.engine, ENGINE_METHOD_ALL) > 0) { infof(data, "set default crypto engine '%s'", ENGINE_get_id(data->state.engine)); } else { failf(data, "set default crypto engine '%s' failed", ENGINE_get_id(data->state.engine)); return CURLE_SSL_ENGINE_SETFAILED; } } #else (void) data; #endif return CURLE_OK; } /* Return list of OpenSSL crypto engine names. */ static struct curl_slist *ossl_engines_list(struct Curl_easy *data) { struct curl_slist *list = NULL; #ifdef USE_OPENSSL_ENGINE struct curl_slist *beg; ENGINE *e; for(e = ENGINE_get_first(); e; e = ENGINE_get_next(e)) { beg = curl_slist_append(list, ENGINE_get_id(e)); if(!beg) { curl_slist_free_all(list); return NULL; } list = beg; } #endif (void) data; return list; } #define set_logger(conn, data) \ conn->ssl[0].backend->logger = data static void ossl_closeone(struct Curl_easy *data, struct connectdata *conn, struct ssl_connect_data *connssl) { struct ssl_backend_data *backend = connssl->backend; DEBUGASSERT(backend); if(backend->handle) { char buf[32]; set_logger(conn, data); /* * The conn->sock[0] socket is passed to openssl with SSL_set_fd(). Make * sure the socket is not closed before calling OpenSSL functions that * will use it. */ DEBUGASSERT(conn->sock[FIRSTSOCKET] != CURL_SOCKET_BAD); /* Maybe the server has already sent a close notify alert. Read it to avoid an RST on the TCP connection. */ (void)SSL_read(backend->handle, buf, (int)sizeof(buf)); (void)SSL_shutdown(backend->handle); SSL_set_connect_state(backend->handle); SSL_free(backend->handle); backend->handle = NULL; } if(backend->ctx) { SSL_CTX_free(backend->ctx); backend->ctx = NULL; } } /* * This function is called when an SSL connection is closed. */ static void ossl_close(struct Curl_easy *data, struct connectdata *conn, int sockindex) { ossl_closeone(data, conn, &conn->ssl[sockindex]); #ifndef CURL_DISABLE_PROXY ossl_closeone(data, conn, &conn->proxy_ssl[sockindex]); #endif } /* * This function is called to shut down the SSL layer but keep the * socket open (CCC - Clear Command Channel) */ static int ossl_shutdown(struct Curl_easy *data, struct connectdata *conn, int sockindex) { int retval = 0; struct ssl_connect_data *connssl = &conn->ssl[sockindex]; char buf[256]; /* We will use this for the OpenSSL error buffer, so it has to be at least 256 bytes long. */ unsigned long sslerror; int nread; int buffsize; int err; bool done = FALSE; struct ssl_backend_data *backend = connssl->backend; int loop = 10; DEBUGASSERT(backend); #ifndef CURL_DISABLE_FTP /* This has only been tested on the proftpd server, and the mod_tls code sends a close notify alert without waiting for a close notify alert in response. Thus we wait for a close notify alert from the server, but we do not send one. Let's hope other servers do the same... */ if(data->set.ftp_ccc == CURLFTPSSL_CCC_ACTIVE) (void)SSL_shutdown(backend->handle); #endif if(backend->handle) { buffsize = (int)sizeof(buf); while(!done && loop--) { int what = SOCKET_READABLE(conn->sock[sockindex], SSL_SHUTDOWN_TIMEOUT); if(what > 0) { ERR_clear_error(); /* Something to read, let's do it and hope that it is the close notify alert from the server */ nread = SSL_read(backend->handle, buf, buffsize); err = SSL_get_error(backend->handle, nread); switch(err) { case SSL_ERROR_NONE: /* this is not an error */ case SSL_ERROR_ZERO_RETURN: /* no more data */ /* This is the expected response. There was no data but only the close notify alert */ done = TRUE; break; case SSL_ERROR_WANT_READ: /* there's data pending, re-invoke SSL_read() */ infof(data, "SSL_ERROR_WANT_READ"); break; case SSL_ERROR_WANT_WRITE: /* SSL wants a write. Really odd. Let's bail out. */ infof(data, "SSL_ERROR_WANT_WRITE"); done = TRUE; break; default: /* openssl/ssl.h says "look at error stack/return value/errno" */ sslerror = ERR_get_error(); failf(data, OSSL_PACKAGE " SSL_read on shutdown: %s, errno %d", (sslerror ? ossl_strerror(sslerror, buf, sizeof(buf)) : SSL_ERROR_to_str(err)), SOCKERRNO); done = TRUE; break; } } else if(0 == what) { /* timeout */ failf(data, "SSL shutdown timeout"); done = TRUE; } else { /* anything that gets here is fatally bad */ failf(data, "select/poll on SSL socket, errno: %d", SOCKERRNO); retval = -1; done = TRUE; } } /* while()-loop for the select() */ if(data->set.verbose) { #ifdef HAVE_SSL_GET_SHUTDOWN switch(SSL_get_shutdown(backend->handle)) { case SSL_SENT_SHUTDOWN: infof(data, "SSL_get_shutdown() returned SSL_SENT_SHUTDOWN"); break; case SSL_RECEIVED_SHUTDOWN: infof(data, "SSL_get_shutdown() returned SSL_RECEIVED_SHUTDOWN"); break; case SSL_SENT_SHUTDOWN|SSL_RECEIVED_SHUTDOWN: infof(data, "SSL_get_shutdown() returned SSL_SENT_SHUTDOWN|" "SSL_RECEIVED__SHUTDOWN"); break; } #endif } SSL_free(backend->handle); backend->handle = NULL; } return retval; } static void ossl_session_free(void *ptr) { /* free the ID */ SSL_SESSION_free(ptr); } /* * This function is called when the 'data' struct is going away. Close * down everything and free all resources! */ static void ossl_close_all(struct Curl_easy *data) { #ifdef USE_OPENSSL_ENGINE if(data->state.engine) { ENGINE_finish(data->state.engine); ENGINE_free(data->state.engine); data->state.engine = NULL; } #else (void)data; #endif #if !defined(HAVE_ERR_REMOVE_THREAD_STATE_DEPRECATED) && \ defined(HAVE_ERR_REMOVE_THREAD_STATE) /* OpenSSL 1.0.1 and 1.0.2 build an error queue that is stored per-thread so we need to clean it here in case the thread will be killed. All OpenSSL code should extract the error in association with the error so clearing this queue here should be harmless at worst. */ ERR_remove_thread_state(NULL); #endif } /* ====================================================== */ /* * Match subjectAltName against the host name. */ static bool subj_alt_hostcheck(struct Curl_easy *data, const char *match_pattern, size_t matchlen, const char *hostname, size_t hostlen, const char *dispname) { #ifdef CURL_DISABLE_VERBOSE_STRINGS (void)dispname; (void)data; #endif if(Curl_cert_hostcheck(match_pattern, matchlen, hostname, hostlen)) { infof(data, " subjectAltName: host \"%s\" matched cert's \"%s\"", dispname, match_pattern); return TRUE; } return FALSE; } /* Quote from RFC2818 section 3.1 "Server Identity" If a subjectAltName extension of type dNSName is present, that MUST be used as the identity. Otherwise, the (most specific) Common Name field in the Subject field of the certificate MUST be used. Although the use of the Common Name is existing practice, it is deprecated and Certification Authorities are encouraged to use the dNSName instead. Matching is performed using the matching rules specified by [RFC2459]. If more than one identity of a given type is present in the certificate (e.g., more than one dNSName name, a match in any one of the set is considered acceptable.) Names may contain the wildcard character * which is considered to match any single domain name component or component fragment. E.g., *.a.com matches foo.a.com but not bar.foo.a.com. f*.com matches foo.com but not bar.com. In some cases, the URI is specified as an IP address rather than a hostname. In this case, the iPAddress subjectAltName must be present in the certificate and must exactly match the IP in the URI. This function is now used from ngtcp2 (QUIC) as well. */ CURLcode Curl_ossl_verifyhost(struct Curl_easy *data, struct connectdata *conn, X509 *server_cert) { bool matched = FALSE; int target = GEN_DNS; /* target type, GEN_DNS or GEN_IPADD */ size_t addrlen = 0; STACK_OF(GENERAL_NAME) *altnames; #ifdef ENABLE_IPV6 struct in6_addr addr; #else struct in_addr addr; #endif CURLcode result = CURLE_OK; bool dNSName = FALSE; /* if a dNSName field exists in the cert */ bool iPAddress = FALSE; /* if a iPAddress field exists in the cert */ const char * const hostname = SSL_HOST_NAME(); const char * const dispname = SSL_HOST_DISPNAME(); size_t hostlen = strlen(hostname); #ifdef ENABLE_IPV6 if(conn->bits.ipv6_ip && Curl_inet_pton(AF_INET6, hostname, &addr)) { target = GEN_IPADD; addrlen = sizeof(struct in6_addr); } else #endif if(Curl_inet_pton(AF_INET, hostname, &addr)) { target = GEN_IPADD; addrlen = sizeof(struct in_addr); } /* get a "list" of alternative names */ altnames = X509_get_ext_d2i(server_cert, NID_subject_alt_name, NULL, NULL); if(altnames) { #ifdef OPENSSL_IS_BORINGSSL size_t numalts; size_t i; #else int numalts; int i; #endif bool dnsmatched = FALSE; bool ipmatched = FALSE; /* get amount of alternatives, RFC2459 claims there MUST be at least one, but we don't depend on it... */ numalts = sk_GENERAL_NAME_num(altnames); /* loop through all alternatives - until a dnsmatch */ for(i = 0; (i < numalts) && !dnsmatched; i++) { /* get a handle to alternative name number i */ const GENERAL_NAME *check = sk_GENERAL_NAME_value(altnames, i); if(check->type == GEN_DNS) dNSName = TRUE; else if(check->type == GEN_IPADD) iPAddress = TRUE; /* only check alternatives of the same type the target is */ if(check->type == target) { /* get data and length */ const char *altptr = (char *)ASN1_STRING_get0_data(check->d.ia5); size_t altlen = (size_t) ASN1_STRING_length(check->d.ia5); switch(target) { case GEN_DNS: /* name/pattern comparison */ /* The OpenSSL man page explicitly says: "In general it cannot be assumed that the data returned by ASN1_STRING_data() is null terminated or does not contain embedded nulls." But also that "The actual format of the data will depend on the actual string type itself: for example for an IA5String the data will be ASCII" It has been however verified that in 0.9.6 and 0.9.7, IA5String is always null-terminated. */ if((altlen == strlen(altptr)) && /* if this isn't true, there was an embedded zero in the name string and we cannot match it. */ subj_alt_hostcheck(data, altptr, altlen, hostname, hostlen, dispname)) { dnsmatched = TRUE; } break; case GEN_IPADD: /* IP address comparison */ /* compare alternative IP address if the data chunk is the same size our server IP address is */ if((altlen == addrlen) && !memcmp(altptr, &addr, altlen)) { ipmatched = TRUE; infof(data, " subjectAltName: host \"%s\" matched cert's IP address!", dispname); } break; } } } GENERAL_NAMES_free(altnames); if(dnsmatched || ipmatched) matched = TRUE; } if(matched) /* an alternative name matched */ ; else if(dNSName || iPAddress) { infof(data, " subjectAltName does not match %s", dispname); failf(data, "SSL: no alternative certificate subject name matches " "target host name '%s'", dispname); result = CURLE_PEER_FAILED_VERIFICATION; } else { /* we have to look to the last occurrence of a commonName in the distinguished one to get the most significant one. */ int i = -1; unsigned char *peer_CN = NULL; int peerlen = 0; /* The following is done because of a bug in 0.9.6b */ X509_NAME *name = X509_get_subject_name(server_cert); if(name) { int j; while((j = X509_NAME_get_index_by_NID(name, NID_commonName, i)) >= 0) i = j; } /* we have the name entry and we will now convert this to a string that we can use for comparison. Doing this we support BMPstring, UTF8, etc. */ if(i >= 0) { ASN1_STRING *tmp = X509_NAME_ENTRY_get_data(X509_NAME_get_entry(name, i)); /* In OpenSSL 0.9.7d and earlier, ASN1_STRING_to_UTF8 fails if the input is already UTF-8 encoded. We check for this case and copy the raw string manually to avoid the problem. This code can be made conditional in the future when OpenSSL has been fixed. */ if(tmp) { if(ASN1_STRING_type(tmp) == V_ASN1_UTF8STRING) { peerlen = ASN1_STRING_length(tmp); if(peerlen >= 0) { peer_CN = OPENSSL_malloc(peerlen + 1); if(peer_CN) { memcpy(peer_CN, ASN1_STRING_get0_data(tmp), peerlen); peer_CN[peerlen] = '\0'; } else result = CURLE_OUT_OF_MEMORY; } } else /* not a UTF8 name */ peerlen = ASN1_STRING_to_UTF8(&peer_CN, tmp); if(peer_CN && (curlx_uztosi(strlen((char *)peer_CN)) != peerlen)) { /* there was a terminating zero before the end of string, this cannot match and we return failure! */ failf(data, "SSL: illegal cert name field"); result = CURLE_PEER_FAILED_VERIFICATION; } } } if(result) /* error already detected, pass through */ ; else if(!peer_CN) { failf(data, "SSL: unable to obtain common name from peer certificate"); result = CURLE_PEER_FAILED_VERIFICATION; } else if(!Curl_cert_hostcheck((const char *)peer_CN, peerlen, hostname, hostlen)) { failf(data, "SSL: certificate subject name '%s' does not match " "target host name '%s'", peer_CN, dispname); result = CURLE_PEER_FAILED_VERIFICATION; } else { infof(data, " common name: %s (matched)", peer_CN); } if(peer_CN) OPENSSL_free(peer_CN); } return result; } #if (OPENSSL_VERSION_NUMBER >= 0x0090808fL) && !defined(OPENSSL_NO_TLSEXT) && \ !defined(OPENSSL_NO_OCSP) static CURLcode verifystatus(struct Curl_easy *data, struct ssl_connect_data *connssl) { int i, ocsp_status; unsigned char *status; const unsigned char *p; CURLcode result = CURLE_OK; OCSP_RESPONSE *rsp = NULL; OCSP_BASICRESP *br = NULL; X509_STORE *st = NULL; STACK_OF(X509) *ch = NULL; struct ssl_backend_data *backend = connssl->backend; X509 *cert; OCSP_CERTID *id = NULL; int cert_status, crl_reason; ASN1_GENERALIZEDTIME *rev, *thisupd, *nextupd; int ret; long len; DEBUGASSERT(backend); len = SSL_get_tlsext_status_ocsp_resp(backend->handle, &status); if(!status) { failf(data, "No OCSP response received"); result = CURLE_SSL_INVALIDCERTSTATUS; goto end; } p = status; rsp = d2i_OCSP_RESPONSE(NULL, &p, len); if(!rsp) { failf(data, "Invalid OCSP response"); result = CURLE_SSL_INVALIDCERTSTATUS; goto end; } ocsp_status = OCSP_response_status(rsp); if(ocsp_status != OCSP_RESPONSE_STATUS_SUCCESSFUL) { failf(data, "Invalid OCSP response status: %s (%d)", OCSP_response_status_str(ocsp_status), ocsp_status); result = CURLE_SSL_INVALIDCERTSTATUS; goto end; } br = OCSP_response_get1_basic(rsp); if(!br) { failf(data, "Invalid OCSP response"); result = CURLE_SSL_INVALIDCERTSTATUS; goto end; } ch = SSL_get_peer_cert_chain(backend->handle); if(!ch) { failf(data, "Could not get peer certificate chain"); result = CURLE_SSL_INVALIDCERTSTATUS; goto end; } st = SSL_CTX_get_cert_store(backend->ctx); #if ((OPENSSL_VERSION_NUMBER <= 0x1000201fL) /* Fixed after 1.0.2a */ || \ (defined(LIBRESSL_VERSION_NUMBER) && \ LIBRESSL_VERSION_NUMBER <= 0x2040200fL)) /* The authorized responder cert in the OCSP response MUST be signed by the peer cert's issuer (see RFC6960 section 4.2.2.2). If that's a root cert, no problem, but if it's an intermediate cert OpenSSL has a bug where it expects this issuer to be present in the chain embedded in the OCSP response. So we add it if necessary. */ /* First make sure the peer cert chain includes both a peer and an issuer, and the OCSP response contains a responder cert. */ if(sk_X509_num(ch) >= 2 && sk_X509_num(br->certs) >= 1) { X509 *responder = sk_X509_value(br->certs, sk_X509_num(br->certs) - 1); /* Find issuer of responder cert and add it to the OCSP response chain */ for(i = 0; i < sk_X509_num(ch); i++) { X509 *issuer = sk_X509_value(ch, i); if(X509_check_issued(issuer, responder) == X509_V_OK) { if(!OCSP_basic_add1_cert(br, issuer)) { failf(data, "Could not add issuer cert to OCSP response"); result = CURLE_SSL_INVALIDCERTSTATUS; goto end; } } } } #endif if(OCSP_basic_verify(br, ch, st, 0) <= 0) { failf(data, "OCSP response verification failed"); result = CURLE_SSL_INVALIDCERTSTATUS; goto end; } /* Compute the certificate's ID */ cert = SSL_get1_peer_certificate(backend->handle); if(!cert) { failf(data, "Error getting peer certificate"); result = CURLE_SSL_INVALIDCERTSTATUS; goto end; } for(i = 0; i < sk_X509_num(ch); i++) { X509 *issuer = sk_X509_value(ch, i); if(X509_check_issued(issuer, cert) == X509_V_OK) { id = OCSP_cert_to_id(EVP_sha1(), cert, issuer); break; } } X509_free(cert); if(!id) { failf(data, "Error computing OCSP ID"); result = CURLE_SSL_INVALIDCERTSTATUS; goto end; } /* Find the single OCSP response corresponding to the certificate ID */ ret = OCSP_resp_find_status(br, id, &cert_status, &crl_reason, &rev, &thisupd, &nextupd); OCSP_CERTID_free(id); if(ret != 1) { failf(data, "Could not find certificate ID in OCSP response"); result = CURLE_SSL_INVALIDCERTSTATUS; goto end; } /* Validate the corresponding single OCSP response */ if(!OCSP_check_validity(thisupd, nextupd, 300L, -1L)) { failf(data, "OCSP response has expired"); result = CURLE_SSL_INVALIDCERTSTATUS; goto end; } infof(data, "SSL certificate status: %s (%d)", OCSP_cert_status_str(cert_status), cert_status); switch(cert_status) { case V_OCSP_CERTSTATUS_GOOD: break; case V_OCSP_CERTSTATUS_REVOKED: result = CURLE_SSL_INVALIDCERTSTATUS; failf(data, "SSL certificate revocation reason: %s (%d)", OCSP_crl_reason_str(crl_reason), crl_reason); goto end; case V_OCSP_CERTSTATUS_UNKNOWN: default: result = CURLE_SSL_INVALIDCERTSTATUS; goto end; } end: if(br) OCSP_BASICRESP_free(br); OCSP_RESPONSE_free(rsp); return result; } #endif #endif /* USE_OPENSSL */ /* The SSL_CTRL_SET_MSG_CALLBACK doesn't exist in ancient OpenSSL versions and thus this cannot be done there. */ #ifdef SSL_CTRL_SET_MSG_CALLBACK static const char *ssl_msg_type(int ssl_ver, int msg) { #ifdef SSL2_VERSION_MAJOR if(ssl_ver == SSL2_VERSION_MAJOR) { switch(msg) { case SSL2_MT_ERROR: return "Error"; case SSL2_MT_CLIENT_HELLO: return "Client hello"; case SSL2_MT_CLIENT_MASTER_KEY: return "Client key"; case SSL2_MT_CLIENT_FINISHED: return "Client finished"; case SSL2_MT_SERVER_HELLO: return "Server hello"; case SSL2_MT_SERVER_VERIFY: return "Server verify"; case SSL2_MT_SERVER_FINISHED: return "Server finished"; case SSL2_MT_REQUEST_CERTIFICATE: return "Request CERT"; case SSL2_MT_CLIENT_CERTIFICATE: return "Client CERT"; } } else #endif if(ssl_ver == SSL3_VERSION_MAJOR) { switch(msg) { case SSL3_MT_HELLO_REQUEST: return "Hello request"; case SSL3_MT_CLIENT_HELLO: return "Client hello"; case SSL3_MT_SERVER_HELLO: return "Server hello"; #ifdef SSL3_MT_NEWSESSION_TICKET case SSL3_MT_NEWSESSION_TICKET: return "Newsession Ticket"; #endif case SSL3_MT_CERTIFICATE: return "Certificate"; case SSL3_MT_SERVER_KEY_EXCHANGE: return "Server key exchange"; case SSL3_MT_CLIENT_KEY_EXCHANGE: return "Client key exchange"; case SSL3_MT_CERTIFICATE_REQUEST: return "Request CERT"; case SSL3_MT_SERVER_DONE: return "Server finished"; case SSL3_MT_CERTIFICATE_VERIFY: return "CERT verify"; case SSL3_MT_FINISHED: return "Finished"; #ifdef SSL3_MT_CERTIFICATE_STATUS case SSL3_MT_CERTIFICATE_STATUS: return "Certificate Status"; #endif #ifdef SSL3_MT_ENCRYPTED_EXTENSIONS case SSL3_MT_ENCRYPTED_EXTENSIONS: return "Encrypted Extensions"; #endif #ifdef SSL3_MT_SUPPLEMENTAL_DATA case SSL3_MT_SUPPLEMENTAL_DATA: return "Supplemental data"; #endif #ifdef SSL3_MT_END_OF_EARLY_DATA case SSL3_MT_END_OF_EARLY_DATA: return "End of early data"; #endif #ifdef SSL3_MT_KEY_UPDATE case SSL3_MT_KEY_UPDATE: return "Key update"; #endif #ifdef SSL3_MT_NEXT_PROTO case SSL3_MT_NEXT_PROTO: return "Next protocol"; #endif #ifdef SSL3_MT_MESSAGE_HASH case SSL3_MT_MESSAGE_HASH: return "Message hash"; #endif } } return "Unknown"; } static const char *tls_rt_type(int type) { switch(type) { #ifdef SSL3_RT_HEADER case SSL3_RT_HEADER: return "TLS header"; #endif case SSL3_RT_CHANGE_CIPHER_SPEC: return "TLS change cipher"; case SSL3_RT_ALERT: return "TLS alert"; case SSL3_RT_HANDSHAKE: return "TLS handshake"; case SSL3_RT_APPLICATION_DATA: return "TLS app data"; default: return "TLS Unknown"; } } /* * Our callback from the SSL/TLS layers. */ static void ossl_trace(int direction, int ssl_ver, int content_type, const void *buf, size_t len, SSL *ssl, void *userp) { char unknown[32]; const char *verstr = NULL; struct connectdata *conn = userp; struct ssl_connect_data *connssl = &conn->ssl[0]; struct ssl_backend_data *backend = connssl->backend; struct Curl_easy *data = NULL; DEBUGASSERT(backend); data = backend->logger; if(!conn || !data || !data->set.fdebug || (direction != 0 && direction != 1)) return; switch(ssl_ver) { #ifdef SSL2_VERSION /* removed in recent versions */ case SSL2_VERSION: verstr = "SSLv2"; break; #endif #ifdef SSL3_VERSION case SSL3_VERSION: verstr = "SSLv3"; break; #endif case TLS1_VERSION: verstr = "TLSv1.0"; break; #ifdef TLS1_1_VERSION case TLS1_1_VERSION: verstr = "TLSv1.1"; break; #endif #ifdef TLS1_2_VERSION case TLS1_2_VERSION: verstr = "TLSv1.2"; break; #endif #ifdef TLS1_3_VERSION case TLS1_3_VERSION: verstr = "TLSv1.3"; break; #endif case 0: break; default: msnprintf(unknown, sizeof(unknown), "(%x)", ssl_ver); verstr = unknown; break; } /* Log progress for interesting records only (like Handshake or Alert), skip * all raw record headers (content_type == SSL3_RT_HEADER or ssl_ver == 0). * For TLS 1.3, skip notification of the decrypted inner Content-Type. */ if(ssl_ver #ifdef SSL3_RT_INNER_CONTENT_TYPE && content_type != SSL3_RT_INNER_CONTENT_TYPE #endif ) { const char *msg_name, *tls_rt_name; char ssl_buf[1024]; int msg_type, txt_len; /* the info given when the version is zero is not that useful for us */ ssl_ver >>= 8; /* check the upper 8 bits only below */ /* SSLv2 doesn't seem to have TLS record-type headers, so OpenSSL * always pass-up content-type as 0. But the interesting message-type * is at 'buf[0]'. */ if(ssl_ver == SSL3_VERSION_MAJOR && content_type) tls_rt_name = tls_rt_type(content_type); else tls_rt_name = ""; if(content_type == SSL3_RT_CHANGE_CIPHER_SPEC) { msg_type = *(char *)buf; msg_name = "Change cipher spec"; } else if(content_type == SSL3_RT_ALERT) { msg_type = (((char *)buf)[0] << 8) + ((char *)buf)[1]; msg_name = SSL_alert_desc_string_long(msg_type); } else { msg_type = *(char *)buf; msg_name = ssl_msg_type(ssl_ver, msg_type); } txt_len = msnprintf(ssl_buf, sizeof(ssl_buf), "%s (%s), %s, %s (%d):\n", verstr, direction?"OUT":"IN", tls_rt_name, msg_name, msg_type); if(0 <= txt_len && (unsigned)txt_len < sizeof(ssl_buf)) { Curl_debug(data, CURLINFO_TEXT, ssl_buf, (size_t)txt_len); } } Curl_debug(data, (direction == 1) ? CURLINFO_SSL_DATA_OUT : CURLINFO_SSL_DATA_IN, (char *)buf, len); (void) ssl; } #endif #ifdef USE_OPENSSL /* ====================================================== */ #ifdef SSL_CTRL_SET_TLSEXT_HOSTNAME # define use_sni(x) sni = (x) #else # define use_sni(x) Curl_nop_stmt #endif /* Check for OpenSSL 1.0.2 which has ALPN support. */ #undef HAS_ALPN #if OPENSSL_VERSION_NUMBER >= 0x10002000L \ && !defined(OPENSSL_NO_TLSEXT) # define HAS_ALPN 1 #endif #if (OPENSSL_VERSION_NUMBER >= 0x10100000L) /* 1.1.0 */ static CURLcode set_ssl_version_min_max(SSL_CTX *ctx, struct connectdata *conn) { /* first, TLS min version... */ long curl_ssl_version_min = SSL_CONN_CONFIG(version); long curl_ssl_version_max; /* convert curl min SSL version option to OpenSSL constant */ #if defined(OPENSSL_IS_BORINGSSL) || defined(LIBRESSL_VERSION_NUMBER) uint16_t ossl_ssl_version_min = 0; uint16_t ossl_ssl_version_max = 0; #else long ossl_ssl_version_min = 0; long ossl_ssl_version_max = 0; #endif switch(curl_ssl_version_min) { case CURL_SSLVERSION_TLSv1: /* TLS 1.x */ case CURL_SSLVERSION_TLSv1_0: ossl_ssl_version_min = TLS1_VERSION; break; case CURL_SSLVERSION_TLSv1_1: ossl_ssl_version_min = TLS1_1_VERSION; break; case CURL_SSLVERSION_TLSv1_2: ossl_ssl_version_min = TLS1_2_VERSION; break; case CURL_SSLVERSION_TLSv1_3: #ifdef TLS1_3_VERSION ossl_ssl_version_min = TLS1_3_VERSION; break; #else return CURLE_NOT_BUILT_IN; #endif } /* CURL_SSLVERSION_DEFAULT means that no option was selected. We don't want to pass 0 to SSL_CTX_set_min_proto_version as it would enable all versions down to the lowest supported by the library. So we skip this, and stay with the library default */ if(curl_ssl_version_min != CURL_SSLVERSION_DEFAULT) { if(!SSL_CTX_set_min_proto_version(ctx, ossl_ssl_version_min)) { return CURLE_SSL_CONNECT_ERROR; } } /* ... then, TLS max version */ curl_ssl_version_max = SSL_CONN_CONFIG(version_max); /* convert curl max SSL version option to OpenSSL constant */ switch(curl_ssl_version_max) { case CURL_SSLVERSION_MAX_TLSv1_0: ossl_ssl_version_max = TLS1_VERSION; break; case CURL_SSLVERSION_MAX_TLSv1_1: ossl_ssl_version_max = TLS1_1_VERSION; break; case CURL_SSLVERSION_MAX_TLSv1_2: ossl_ssl_version_max = TLS1_2_VERSION; break; #ifdef TLS1_3_VERSION case CURL_SSLVERSION_MAX_TLSv1_3: ossl_ssl_version_max = TLS1_3_VERSION; break; #endif case CURL_SSLVERSION_MAX_NONE: /* none selected */ case CURL_SSLVERSION_MAX_DEFAULT: /* max selected */ default: /* SSL_CTX_set_max_proto_version states that: setting the maximum to 0 will enable protocol versions up to the highest version supported by the library */ ossl_ssl_version_max = 0; break; } if(!SSL_CTX_set_max_proto_version(ctx, ossl_ssl_version_max)) { return CURLE_SSL_CONNECT_ERROR; } return CURLE_OK; } #endif #ifdef OPENSSL_IS_BORINGSSL typedef uint32_t ctx_option_t; #elif OPENSSL_VERSION_NUMBER >= 0x30000000L typedef uint64_t ctx_option_t; #else typedef long ctx_option_t; #endif #if (OPENSSL_VERSION_NUMBER < 0x10100000L) /* 1.1.0 */ static CURLcode set_ssl_version_min_max_legacy(ctx_option_t *ctx_options, struct Curl_easy *data, struct connectdata *conn, int sockindex) { long ssl_version = SSL_CONN_CONFIG(version); long ssl_version_max = SSL_CONN_CONFIG(version_max); (void) data; /* In case it's unused. */ switch(ssl_version) { case CURL_SSLVERSION_TLSv1_3: #ifdef TLS1_3_VERSION { struct ssl_connect_data *connssl = &conn->ssl[sockindex]; struct ssl_backend_data *backend = connssl->backend; DEBUGASSERT(backend); SSL_CTX_set_max_proto_version(backend->ctx, TLS1_3_VERSION); *ctx_options |= SSL_OP_NO_TLSv1_2; } #else (void)sockindex; (void)ctx_options; failf(data, OSSL_PACKAGE " was built without TLS 1.3 support"); return CURLE_NOT_BUILT_IN; #endif /* FALLTHROUGH */ case CURL_SSLVERSION_TLSv1_2: #if OPENSSL_VERSION_NUMBER >= 0x1000100FL *ctx_options |= SSL_OP_NO_TLSv1_1; #else failf(data, OSSL_PACKAGE " was built without TLS 1.2 support"); return CURLE_NOT_BUILT_IN; #endif /* FALLTHROUGH */ case CURL_SSLVERSION_TLSv1_1: #if OPENSSL_VERSION_NUMBER >= 0x1000100FL *ctx_options |= SSL_OP_NO_TLSv1; #else failf(data, OSSL_PACKAGE " was built without TLS 1.1 support"); return CURLE_NOT_BUILT_IN; #endif /* FALLTHROUGH */ case CURL_SSLVERSION_TLSv1_0: case CURL_SSLVERSION_TLSv1: break; } switch(ssl_version_max) { case CURL_SSLVERSION_MAX_TLSv1_0: #if OPENSSL_VERSION_NUMBER >= 0x1000100FL *ctx_options |= SSL_OP_NO_TLSv1_1; #endif /* FALLTHROUGH */ case CURL_SSLVERSION_MAX_TLSv1_1: #if OPENSSL_VERSION_NUMBER >= 0x1000100FL *ctx_options |= SSL_OP_NO_TLSv1_2; #endif /* FALLTHROUGH */ case CURL_SSLVERSION_MAX_TLSv1_2: #ifdef TLS1_3_VERSION *ctx_options |= SSL_OP_NO_TLSv1_3; #endif break; case CURL_SSLVERSION_MAX_TLSv1_3: #ifdef TLS1_3_VERSION break; #else failf(data, OSSL_PACKAGE " was built without TLS 1.3 support"); return CURLE_NOT_BUILT_IN; #endif } return CURLE_OK; } #endif /* The "new session" callback must return zero if the session can be removed * or non-zero if the session has been put into the session cache. */ static int ossl_new_session_cb(SSL *ssl, SSL_SESSION *ssl_sessionid) { int res = 0; struct connectdata *conn; struct Curl_easy *data; int sockindex; curl_socket_t *sockindex_ptr; int data_idx = ossl_get_ssl_data_index(); int connectdata_idx = ossl_get_ssl_conn_index(); int sockindex_idx = ossl_get_ssl_sockindex_index(); int proxy_idx = ossl_get_proxy_index(); bool isproxy; if(data_idx < 0 || connectdata_idx < 0 || sockindex_idx < 0 || proxy_idx < 0) return 0; conn = (struct connectdata*) SSL_get_ex_data(ssl, connectdata_idx); data = (struct Curl_easy *) SSL_get_ex_data(ssl, data_idx); /* The sockindex has been stored as a pointer to an array element */ sockindex_ptr = (curl_socket_t*) SSL_get_ex_data(ssl, sockindex_idx); if(!conn || !data || !sockindex_ptr) return 0; sockindex = (int)(sockindex_ptr - conn->sock); isproxy = SSL_get_ex_data(ssl, proxy_idx) ? TRUE : FALSE; if(SSL_SET_OPTION(primary.sessionid)) { bool incache; bool added = FALSE; void *old_ssl_sessionid = NULL; Curl_ssl_sessionid_lock(data); if(isproxy) incache = FALSE; else incache = !(Curl_ssl_getsessionid(data, conn, isproxy, &old_ssl_sessionid, NULL, sockindex)); if(incache) { if(old_ssl_sessionid != ssl_sessionid) { infof(data, "old SSL session ID is stale, removing"); Curl_ssl_delsessionid(data, old_ssl_sessionid); incache = FALSE; } } if(!incache) { if(!Curl_ssl_addsessionid(data, conn, isproxy, ssl_sessionid, 0 /* unknown size */, sockindex, &added)) { if(added) { /* the session has been put into the session cache */ res = 1; } } else failf(data, "failed to store ssl session"); } Curl_ssl_sessionid_unlock(data); } return res; } static CURLcode load_cacert_from_memory(X509_STORE *store, const struct curl_blob *ca_info_blob) { /* these need to be freed at the end */ BIO *cbio = NULL; STACK_OF(X509_INFO) *inf = NULL; /* everything else is just a reference */ int i, count = 0; X509_INFO *itmp = NULL; if(ca_info_blob->len > (size_t)INT_MAX) return CURLE_SSL_CACERT_BADFILE; cbio = BIO_new_mem_buf(ca_info_blob->data, (int)ca_info_blob->len); if(!cbio) return CURLE_OUT_OF_MEMORY; inf = PEM_X509_INFO_read_bio(cbio, NULL, NULL, NULL); if(!inf) { BIO_free(cbio); return CURLE_SSL_CACERT_BADFILE; } /* add each entry from PEM file to x509_store */ for(i = 0; i < (int)sk_X509_INFO_num(inf); ++i) { itmp = sk_X509_INFO_value(inf, i); if(itmp->x509) { if(X509_STORE_add_cert(store, itmp->x509)) { ++count; } else { /* set count to 0 to return an error */ count = 0; break; } } if(itmp->crl) { if(X509_STORE_add_crl(store, itmp->crl)) { ++count; } else { /* set count to 0 to return an error */ count = 0; break; } } } sk_X509_INFO_pop_free(inf, X509_INFO_free); BIO_free(cbio); /* if we didn't end up importing anything, treat that as an error */ return (count > 0 ? CURLE_OK : CURLE_SSL_CACERT_BADFILE); } static CURLcode populate_x509_store(struct Curl_easy *data, struct connectdata *conn, X509_STORE *store) { CURLcode result = CURLE_OK; X509_LOOKUP *lookup = NULL; const struct curl_blob *ca_info_blob = SSL_CONN_CONFIG(ca_info_blob); const char * const ssl_cafile = /* CURLOPT_CAINFO_BLOB overrides CURLOPT_CAINFO */ (ca_info_blob ? NULL : SSL_CONN_CONFIG(CAfile)); const char * const ssl_capath = SSL_CONN_CONFIG(CApath); const char * const ssl_crlfile = SSL_SET_OPTION(primary.CRLfile); const bool verifypeer = SSL_CONN_CONFIG(verifypeer); bool imported_native_ca = false; if(!store) return CURLE_OUT_OF_MEMORY; #if defined(USE_WIN32_CRYPTO) /* Import certificates from the Windows root certificate store if requested. https://stackoverflow.com/questions/9507184/ https://github.com/d3x0r/SACK/blob/master/src/netlib/ssl_layer.c#L1037 https://datatracker.ietf.org/doc/html/rfc5280 */ if((SSL_CONN_CONFIG(verifypeer) || SSL_CONN_CONFIG(verifyhost)) && (SSL_SET_OPTION(native_ca_store))) { HCERTSTORE hStore = CertOpenSystemStore(0, TEXT("ROOT")); if(hStore) { PCCERT_CONTEXT pContext = NULL; /* The array of enhanced key usage OIDs will vary per certificate and is declared outside of the loop so that rather than malloc/free each iteration we can grow it with realloc, when necessary. */ CERT_ENHKEY_USAGE *enhkey_usage = NULL; DWORD enhkey_usage_size = 0; /* This loop makes a best effort to import all valid certificates from the MS root store. If a certificate cannot be imported it is skipped. 'result' is used to store only hard-fail conditions (such as out of memory) that cause an early break. */ result = CURLE_OK; for(;;) { X509 *x509; FILETIME now; BYTE key_usage[2]; DWORD req_size; const unsigned char *encoded_cert; #if defined(DEBUGBUILD) && !defined(CURL_DISABLE_VERBOSE_STRINGS) char cert_name[256]; #endif pContext = CertEnumCertificatesInStore(hStore, pContext); if(!pContext) break; #if defined(DEBUGBUILD) && !defined(CURL_DISABLE_VERBOSE_STRINGS) if(!CertGetNameStringA(pContext, CERT_NAME_SIMPLE_DISPLAY_TYPE, 0, NULL, cert_name, sizeof(cert_name))) { strcpy(cert_name, "Unknown"); } infof(data, "SSL: Checking cert \"%s\"", cert_name); #endif encoded_cert = (const unsigned char *)pContext->pbCertEncoded; if(!encoded_cert) continue; GetSystemTimeAsFileTime(&now); if(CompareFileTime(&pContext->pCertInfo->NotBefore, &now) > 0 || CompareFileTime(&now, &pContext->pCertInfo->NotAfter) > 0) continue; /* If key usage exists check for signing attribute */ if(CertGetIntendedKeyUsage(pContext->dwCertEncodingType, pContext->pCertInfo, key_usage, sizeof(key_usage))) { if(!(key_usage[0] & CERT_KEY_CERT_SIGN_KEY_USAGE)) continue; } else if(GetLastError()) continue; /* If enhanced key usage exists check for server auth attribute. * * Note "In a Microsoft environment, a certificate might also have EKU * extended properties that specify valid uses for the certificate." * The call below checks both, and behavior varies depending on what is * found. For more details see CertGetEnhancedKeyUsage doc. */ if(CertGetEnhancedKeyUsage(pContext, 0, NULL, &req_size)) { if(req_size && req_size > enhkey_usage_size) { void *tmp = realloc(enhkey_usage, req_size); if(!tmp) { failf(data, "SSL: Out of memory allocating for OID list"); result = CURLE_OUT_OF_MEMORY; break; } enhkey_usage = (CERT_ENHKEY_USAGE *)tmp; enhkey_usage_size = req_size; } if(CertGetEnhancedKeyUsage(pContext, 0, enhkey_usage, &req_size)) { if(!enhkey_usage->cUsageIdentifier) { /* "If GetLastError returns CRYPT_E_NOT_FOUND, the certificate is good for all uses. If it returns zero, the certificate has no valid uses." */ if((HRESULT)GetLastError() != CRYPT_E_NOT_FOUND) continue; } else { DWORD i; bool found = false; for(i = 0; i < enhkey_usage->cUsageIdentifier; ++i) { if(!strcmp("1.3.6.1.5.5.7.3.1" /* OID server auth */, enhkey_usage->rgpszUsageIdentifier[i])) { found = true; break; } } if(!found) continue; } } else continue; } else continue; x509 = d2i_X509(NULL, &encoded_cert, pContext->cbCertEncoded); if(!x509) continue; /* Try to import the certificate. This may fail for legitimate reasons such as duplicate certificate, which is allowed by MS but not OpenSSL. */ if(X509_STORE_add_cert(store, x509) == 1) { #if defined(DEBUGBUILD) && !defined(CURL_DISABLE_VERBOSE_STRINGS) infof(data, "SSL: Imported cert \"%s\"", cert_name); #endif imported_native_ca = true; } X509_free(x509); } free(enhkey_usage); CertFreeCertificateContext(pContext); CertCloseStore(hStore, 0); if(result) return result; } if(imported_native_ca) infof(data, "successfully imported Windows CA store"); else infof(data, "error importing Windows CA store, continuing anyway"); } #endif if(ca_info_blob) { result = load_cacert_from_memory(store, ca_info_blob); if(result) { if(result == CURLE_OUT_OF_MEMORY || (verifypeer && !imported_native_ca)) { failf(data, "error importing CA certificate blob"); return result; } /* Only warn if no certificate verification is required. */ infof(data, "error importing CA certificate blob, continuing anyway"); } } if(verifypeer && !imported_native_ca && (ssl_cafile || ssl_capath)) { #if defined(OPENSSL_VERSION_MAJOR) && (OPENSSL_VERSION_MAJOR >= 3) /* OpenSSL 3.0.0 has deprecated SSL_CTX_load_verify_locations */ if(ssl_cafile && !X509_STORE_load_file(store, ssl_cafile)) { /* Fail if we insist on successfully verifying the server. */ failf(data, "error setting certificate file: %s", ssl_cafile); return CURLE_SSL_CACERT_BADFILE; } if(ssl_capath && !X509_STORE_load_path(store, ssl_capath)) { /* Fail if we insist on successfully verifying the server. */ failf(data, "error setting certificate path: %s", ssl_capath); return CURLE_SSL_CACERT_BADFILE; } #else /* tell OpenSSL where to find CA certificates that are used to verify the server's certificate. */ if(!X509_STORE_load_locations(store, ssl_cafile, ssl_capath)) { /* Fail if we insist on successfully verifying the server. */ failf(data, "error setting certificate verify locations:" " CAfile: %s CApath: %s", ssl_cafile ? ssl_cafile : "none", ssl_capath ? ssl_capath : "none"); return CURLE_SSL_CACERT_BADFILE; } #endif infof(data, " CAfile: %s", ssl_cafile ? ssl_cafile : "none"); infof(data, " CApath: %s", ssl_capath ? ssl_capath : "none"); } #ifdef CURL_CA_FALLBACK if(verifypeer && !ca_info_blob && !ssl_cafile && !ssl_capath && !imported_native_ca) { /* verifying the peer without any CA certificates won't work so use openssl's built-in default as fallback */ X509_STORE_set_default_paths(store); } #endif if(ssl_crlfile) { /* tell OpenSSL where to find CRL file that is used to check certificate * revocation */ lookup = X509_STORE_add_lookup(store, X509_LOOKUP_file()); if(!lookup || (!X509_load_crl_file(lookup, ssl_crlfile, X509_FILETYPE_PEM)) ) { failf(data, "error loading CRL file: %s", ssl_crlfile); return CURLE_SSL_CRL_BADFILE; } /* Everything is fine. */ infof(data, "successfully loaded CRL file:"); X509_STORE_set_flags(store, X509_V_FLAG_CRL_CHECK|X509_V_FLAG_CRL_CHECK_ALL); infof(data, " CRLfile: %s", ssl_crlfile); } if(verifypeer) { /* Try building a chain using issuers in the trusted store first to avoid problems with server-sent legacy intermediates. Newer versions of OpenSSL do alternate chain checking by default but we do not know how to determine that in a reliable manner. https://rt.openssl.org/Ticket/Display.html?id=3621&user=guest&pass=guest */ #if defined(X509_V_FLAG_TRUSTED_FIRST) X509_STORE_set_flags(store, X509_V_FLAG_TRUSTED_FIRST); #endif #ifdef X509_V_FLAG_PARTIAL_CHAIN if(!SSL_SET_OPTION(no_partialchain) && !ssl_crlfile) { /* Have intermediate certificates in the trust store be treated as trust-anchors, in the same way as self-signed root CA certificates are. This allows users to verify servers using the intermediate cert only, instead of needing the whole chain. Due to OpenSSL bug https://github.com/openssl/openssl/issues/5081 we cannot do partial chains with a CRL check. */ X509_STORE_set_flags(store, X509_V_FLAG_PARTIAL_CHAIN); } #endif } return result; } #if defined(HAVE_SSL_X509_STORE_SHARE) static bool cached_x509_store_expired(const struct Curl_easy *data, const struct multi_ssl_backend_data *mb) { const struct ssl_general_config *cfg = &data->set.general_ssl; struct curltime now = Curl_now(); timediff_t elapsed_ms = Curl_timediff(now, mb->time); timediff_t timeout_ms = cfg->ca_cache_timeout * (timediff_t)1000; if(timeout_ms < 0) return false; return elapsed_ms >= timeout_ms; } static bool cached_x509_store_different( const struct multi_ssl_backend_data *mb, const struct connectdata *conn) { if(!mb->CAfile || !SSL_CONN_CONFIG(CAfile)) return mb->CAfile != SSL_CONN_CONFIG(CAfile); return strcmp(mb->CAfile, SSL_CONN_CONFIG(CAfile)); } static X509_STORE *get_cached_x509_store(const struct Curl_easy *data, const struct connectdata *conn) { struct Curl_multi *multi = data->multi_easy ? data->multi_easy : data->multi; X509_STORE *store = NULL; if(multi && multi->ssl_backend_data && multi->ssl_backend_data->store && !cached_x509_store_expired(data, multi->ssl_backend_data) && !cached_x509_store_different(multi->ssl_backend_data, conn)) { store = multi->ssl_backend_data->store; } return store; } static void set_cached_x509_store(const struct Curl_easy *data, const struct connectdata *conn, X509_STORE *store) { struct Curl_multi *multi = data->multi_easy ? data->multi_easy : data->multi; struct multi_ssl_backend_data *mbackend; if(!multi) return; if(!multi->ssl_backend_data) { multi->ssl_backend_data = calloc(1, sizeof(struct multi_ssl_backend_data)); if(!multi->ssl_backend_data) return; } mbackend = multi->ssl_backend_data; if(X509_STORE_up_ref(store)) { char *CAfile = NULL; if(SSL_CONN_CONFIG(CAfile)) { CAfile = strdup(SSL_CONN_CONFIG(CAfile)); if(!CAfile) { X509_STORE_free(store); return; } } if(mbackend->store) { X509_STORE_free(mbackend->store); free(mbackend->CAfile); } mbackend->time = Curl_now(); mbackend->store = store; mbackend->CAfile = CAfile; } } static CURLcode set_up_x509_store(struct Curl_easy *data, struct connectdata *conn, struct ssl_backend_data *backend) { CURLcode result = CURLE_OK; X509_STORE *cached_store; bool cache_criteria_met; /* Consider the X509 store cacheable if it comes exclusively from a CAfile, or no source is provided and we are falling back to openssl's built-in default. */ cache_criteria_met = (data->set.general_ssl.ca_cache_timeout != 0) && SSL_CONN_CONFIG(verifypeer) && !SSL_CONN_CONFIG(CApath) && !SSL_CONN_CONFIG(ca_info_blob) && !SSL_SET_OPTION(primary.CRLfile) && !SSL_SET_OPTION(native_ca_store); cached_store = get_cached_x509_store(data, conn); if(cached_store && cache_criteria_met && X509_STORE_up_ref(cached_store)) { SSL_CTX_set_cert_store(backend->ctx, cached_store); } else { X509_STORE *store = SSL_CTX_get_cert_store(backend->ctx); result = populate_x509_store(data, conn, store); if(result == CURLE_OK && cache_criteria_met) { set_cached_x509_store(data, conn, store); } } return result; } #else /* HAVE_SSL_X509_STORE_SHARE */ static CURLcode set_up_x509_store(struct Curl_easy *data, struct connectdata *conn, struct ssl_backend_data *backend) { X509_STORE *store = SSL_CTX_get_cert_store(backend->ctx); return populate_x509_store(data, conn, store); } #endif /* HAVE_SSL_X509_STORE_SHARE */ static CURLcode ossl_connect_step1(struct Curl_easy *data, struct connectdata *conn, int sockindex) { CURLcode result = CURLE_OK; char *ciphers; SSL_METHOD_QUAL SSL_METHOD *req_method = NULL; curl_socket_t sockfd = conn->sock[sockindex]; struct ssl_connect_data *connssl = &conn->ssl[sockindex]; ctx_option_t ctx_options = 0; void *ssl_sessionid = NULL; #ifdef SSL_CTRL_SET_TLSEXT_HOSTNAME bool sni; const char * const hostname = SSL_HOST_NAME(); #ifdef ENABLE_IPV6 struct in6_addr addr; #else struct in_addr addr; #endif #endif const long int ssl_version = SSL_CONN_CONFIG(version); #ifdef USE_OPENSSL_SRP const enum CURL_TLSAUTH ssl_authtype = SSL_SET_OPTION(primary.authtype); #endif char * const ssl_cert = SSL_SET_OPTION(primary.clientcert); const struct curl_blob *ssl_cert_blob = SSL_SET_OPTION(primary.cert_blob); const char * const ssl_cert_type = SSL_SET_OPTION(cert_type); const bool verifypeer = SSL_CONN_CONFIG(verifypeer); char error_buffer[256]; struct ssl_backend_data *backend = connssl->backend; DEBUGASSERT(ssl_connect_1 == connssl->connecting_state); DEBUGASSERT(backend); /* Make funny stuff to get random input */ result = ossl_seed(data); if(result) return result; SSL_SET_OPTION_LVALUE(certverifyresult) = !X509_V_OK; /* check to see if we've been told to use an explicit SSL/TLS version */ switch(ssl_version) { case CURL_SSLVERSION_DEFAULT: case CURL_SSLVERSION_TLSv1: case CURL_SSLVERSION_TLSv1_0: case CURL_SSLVERSION_TLSv1_1: case CURL_SSLVERSION_TLSv1_2: case CURL_SSLVERSION_TLSv1_3: /* it will be handled later with the context options */ #if (OPENSSL_VERSION_NUMBER >= 0x10100000L) req_method = TLS_client_method(); #else req_method = SSLv23_client_method(); #endif use_sni(TRUE); break; case CURL_SSLVERSION_SSLv2: failf(data, "No SSLv2 support"); return CURLE_NOT_BUILT_IN; case CURL_SSLVERSION_SSLv3: failf(data, "No SSLv3 support"); return CURLE_NOT_BUILT_IN; default: failf(data, "Unrecognized parameter passed via CURLOPT_SSLVERSION"); return CURLE_SSL_CONNECT_ERROR; } DEBUGASSERT(!backend->ctx); backend->ctx = SSL_CTX_new(req_method); if(!backend->ctx) { failf(data, "SSL: couldn't create a context: %s", ossl_strerror(ERR_peek_error(), error_buffer, sizeof(error_buffer))); return CURLE_OUT_OF_MEMORY; } #ifdef SSL_MODE_RELEASE_BUFFERS SSL_CTX_set_mode(backend->ctx, SSL_MODE_RELEASE_BUFFERS); #endif #ifdef SSL_CTRL_SET_MSG_CALLBACK if(data->set.fdebug && data->set.verbose) { /* the SSL trace callback is only used for verbose logging */ SSL_CTX_set_msg_callback(backend->ctx, ossl_trace); SSL_CTX_set_msg_callback_arg(backend->ctx, conn); set_logger(conn, data); } #endif /* OpenSSL contains code to work around lots of bugs and flaws in various SSL-implementations. SSL_CTX_set_options() is used to enabled those work-arounds. The man page for this option states that SSL_OP_ALL enables all the work-arounds and that "It is usually safe to use SSL_OP_ALL to enable the bug workaround options if compatibility with somewhat broken implementations is desired." The "-no_ticket" option was introduced in OpenSSL 0.9.8j. It's a flag to disable "rfc4507bis session ticket support". rfc4507bis was later turned into the proper RFC5077: https://datatracker.ietf.org/doc/html/rfc5077 The enabled extension concerns the session management. I wonder how often libcurl stops a connection and then resumes a TLS session. Also, sending the session data is some overhead. I suggest that you just use your proposed patch (which explicitly disables TICKET). If someone writes an application with libcurl and OpenSSL who wants to enable the feature, one can do this in the SSL callback. SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG option enabling allowed proper interoperability with web server Netscape Enterprise Server 2.0.1 which was released back in 1996. Due to CVE-2010-4180, option SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG has become ineffective as of OpenSSL 0.9.8q and 1.0.0c. In order to mitigate CVE-2010-4180 when using previous OpenSSL versions we no longer enable this option regardless of OpenSSL version and SSL_OP_ALL definition. OpenSSL added a work-around for a SSL 3.0/TLS 1.0 CBC vulnerability (https://www.openssl.org/~bodo/tls-cbc.txt). In 0.9.6e they added a bit to SSL_OP_ALL that _disables_ that work-around despite the fact that SSL_OP_ALL is documented to do "rather harmless" workarounds. In order to keep the secure work-around, the SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS bit must not be set. */ ctx_options = SSL_OP_ALL; #ifdef SSL_OP_NO_TICKET ctx_options |= SSL_OP_NO_TICKET; #endif #ifdef SSL_OP_NO_COMPRESSION ctx_options |= SSL_OP_NO_COMPRESSION; #endif #ifdef SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG /* mitigate CVE-2010-4180 */ ctx_options &= ~SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG; #endif #ifdef SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS /* unless the user explicitly asks to allow the protocol vulnerability we use the work-around */ if(!SSL_SET_OPTION(enable_beast)) ctx_options &= ~SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS; #endif switch(ssl_version) { case CURL_SSLVERSION_SSLv2: case CURL_SSLVERSION_SSLv3: return CURLE_NOT_BUILT_IN; /* "--tlsv" options mean TLS >= version */ case CURL_SSLVERSION_DEFAULT: case CURL_SSLVERSION_TLSv1: /* TLS >= version 1.0 */ case CURL_SSLVERSION_TLSv1_0: /* TLS >= version 1.0 */ case CURL_SSLVERSION_TLSv1_1: /* TLS >= version 1.1 */ case CURL_SSLVERSION_TLSv1_2: /* TLS >= version 1.2 */ case CURL_SSLVERSION_TLSv1_3: /* TLS >= version 1.3 */ /* asking for any TLS version as the minimum, means no SSL versions allowed */ ctx_options |= SSL_OP_NO_SSLv2; ctx_options |= SSL_OP_NO_SSLv3; #if (OPENSSL_VERSION_NUMBER >= 0x10100000L) /* 1.1.0 */ result = set_ssl_version_min_max(backend->ctx, conn); #else result = set_ssl_version_min_max_legacy(&ctx_options, data, conn, sockindex); #endif if(result != CURLE_OK) return result; break; default: failf(data, "Unrecognized parameter passed via CURLOPT_SSLVERSION"); return CURLE_SSL_CONNECT_ERROR; } SSL_CTX_set_options(backend->ctx, ctx_options); #ifdef HAS_ALPN if(conn->bits.tls_enable_alpn) { int cur = 0; unsigned char protocols[128]; #ifdef USE_HTTP2 if(data->state.httpwant >= CURL_HTTP_VERSION_2 #ifndef CURL_DISABLE_PROXY && (!SSL_IS_PROXY() || !conn->bits.tunnel_proxy) #endif ) { protocols[cur++] = ALPN_H2_LENGTH; memcpy(&protocols[cur], ALPN_H2, ALPN_H2_LENGTH); cur += ALPN_H2_LENGTH; infof(data, VTLS_INFOF_ALPN_OFFER_1STR, ALPN_H2); } #endif protocols[cur++] = ALPN_HTTP_1_1_LENGTH; memcpy(&protocols[cur], ALPN_HTTP_1_1, ALPN_HTTP_1_1_LENGTH); cur += ALPN_HTTP_1_1_LENGTH; infof(data, VTLS_INFOF_ALPN_OFFER_1STR, ALPN_HTTP_1_1); /* expects length prefixed preference ordered list of protocols in wire * format */ if(SSL_CTX_set_alpn_protos(backend->ctx, protocols, cur)) { failf(data, "Error setting ALPN"); return CURLE_SSL_CONNECT_ERROR; } } #endif if(ssl_cert || ssl_cert_blob || ssl_cert_type) { if(!result && !cert_stuff(data, backend->ctx, ssl_cert, ssl_cert_blob, ssl_cert_type, SSL_SET_OPTION(key), SSL_SET_OPTION(key_blob), SSL_SET_OPTION(key_type), SSL_SET_OPTION(key_passwd))) result = CURLE_SSL_CERTPROBLEM; if(result) /* failf() is already done in cert_stuff() */ return result; } ciphers = SSL_CONN_CONFIG(cipher_list); if(!ciphers) ciphers = (char *)DEFAULT_CIPHER_SELECTION; if(ciphers) { if(!SSL_CTX_set_cipher_list(backend->ctx, ciphers)) { failf(data, "failed setting cipher list: %s", ciphers); return CURLE_SSL_CIPHER; } infof(data, "Cipher selection: %s", ciphers); } #ifdef HAVE_SSL_CTX_SET_CIPHERSUITES { char *ciphers13 = SSL_CONN_CONFIG(cipher_list13); if(ciphers13) { if(!SSL_CTX_set_ciphersuites(backend->ctx, ciphers13)) { failf(data, "failed setting TLS 1.3 cipher suite: %s", ciphers13); return CURLE_SSL_CIPHER; } infof(data, "TLS 1.3 cipher selection: %s", ciphers13); } } #endif #ifdef HAVE_SSL_CTX_SET_POST_HANDSHAKE_AUTH /* OpenSSL 1.1.1 requires clients to opt-in for PHA */ SSL_CTX_set_post_handshake_auth(backend->ctx, 1); #endif #ifdef HAVE_SSL_CTX_SET_EC_CURVES { char *curves = SSL_CONN_CONFIG(curves); if(curves) { if(!SSL_CTX_set1_curves_list(backend->ctx, curves)) { failf(data, "failed setting curves list: '%s'", curves); return CURLE_SSL_CIPHER; } } } #endif #ifdef USE_OPENSSL_SRP if((ssl_authtype == CURL_TLSAUTH_SRP) && Curl_auth_allowed_to_host(data)) { char * const ssl_username = SSL_SET_OPTION(primary.username); char * const ssl_password = SSL_SET_OPTION(primary.password); infof(data, "Using TLS-SRP username: %s", ssl_username); if(!SSL_CTX_set_srp_username(backend->ctx, ssl_username)) { failf(data, "Unable to set SRP user name"); return CURLE_BAD_FUNCTION_ARGUMENT; } if(!SSL_CTX_set_srp_password(backend->ctx, ssl_password)) { failf(data, "failed setting SRP password"); return CURLE_BAD_FUNCTION_ARGUMENT; } if(!SSL_CONN_CONFIG(cipher_list)) { infof(data, "Setting cipher list SRP"); if(!SSL_CTX_set_cipher_list(backend->ctx, "SRP")) { failf(data, "failed setting SRP cipher list"); return CURLE_SSL_CIPHER; } } } #endif result = set_up_x509_store(data, conn, backend); if(result) return result; /* OpenSSL always tries to verify the peer, this only says whether it should * fail to connect if the verification fails, or if it should continue * anyway. In the latter case the result of the verification is checked with * SSL_get_verify_result() below. */ SSL_CTX_set_verify(backend->ctx, verifypeer ? SSL_VERIFY_PEER : SSL_VERIFY_NONE, NULL); /* Enable logging of secrets to the file specified in env SSLKEYLOGFILE. */ #ifdef HAVE_KEYLOG_CALLBACK if(Curl_tls_keylog_enabled()) { SSL_CTX_set_keylog_callback(backend->ctx, ossl_keylog_callback); } #endif /* Enable the session cache because it's a prerequisite for the "new session" * callback. Use the "external storage" mode to prevent OpenSSL from creating * an internal session cache. */ SSL_CTX_set_session_cache_mode(backend->ctx, SSL_SESS_CACHE_CLIENT | SSL_SESS_CACHE_NO_INTERNAL); SSL_CTX_sess_set_new_cb(backend->ctx, ossl_new_session_cb); /* give application a chance to interfere with SSL set up. */ if(data->set.ssl.fsslctx) { Curl_set_in_callback(data, true); result = (*data->set.ssl.fsslctx)(data, backend->ctx, data->set.ssl.fsslctxp); Curl_set_in_callback(data, false); if(result) { failf(data, "error signaled by ssl ctx callback"); return result; } } /* Let's make an SSL structure */ if(backend->handle) SSL_free(backend->handle); backend->handle = SSL_new(backend->ctx); if(!backend->handle) { failf(data, "SSL: couldn't create a context (handle)"); return CURLE_OUT_OF_MEMORY; } #if (OPENSSL_VERSION_NUMBER >= 0x0090808fL) && !defined(OPENSSL_NO_TLSEXT) && \ !defined(OPENSSL_NO_OCSP) if(SSL_CONN_CONFIG(verifystatus)) SSL_set_tlsext_status_type(backend->handle, TLSEXT_STATUSTYPE_ocsp); #endif #if defined(OPENSSL_IS_BORINGSSL) && defined(ALLOW_RENEG) SSL_set_renegotiate_mode(backend->handle, ssl_renegotiate_freely); #endif SSL_set_connect_state(backend->handle); backend->server_cert = 0x0; #ifdef SSL_CTRL_SET_TLSEXT_HOSTNAME if((0 == Curl_inet_pton(AF_INET, hostname, &addr)) && #ifdef ENABLE_IPV6 (0 == Curl_inet_pton(AF_INET6, hostname, &addr)) && #endif sni) { char *snihost = Curl_ssl_snihost(data, hostname, NULL); if(!snihost || !SSL_set_tlsext_host_name(backend->handle, snihost)) { failf(data, "Failed set SNI"); return CURLE_SSL_CONNECT_ERROR; } } #endif if(!ossl_associate_connection(data, conn, sockindex)) { /* Maybe the internal errors of SSL_get_ex_new_index or SSL_set_ex_data */ failf(data, "SSL: ossl_associate_connection failed: %s", ossl_strerror(ERR_get_error(), error_buffer, sizeof(error_buffer))); return CURLE_SSL_CONNECT_ERROR; } if(SSL_SET_OPTION(primary.sessionid)) { Curl_ssl_sessionid_lock(data); if(!Curl_ssl_getsessionid(data, conn, SSL_IS_PROXY() ? TRUE : FALSE, &ssl_sessionid, NULL, sockindex)) { /* we got a session id, use it! */ if(!SSL_set_session(backend->handle, ssl_sessionid)) { Curl_ssl_sessionid_unlock(data); failf(data, "SSL: SSL_set_session failed: %s", ossl_strerror(ERR_get_error(), error_buffer, sizeof(error_buffer))); return CURLE_SSL_CONNECT_ERROR; } /* Informational message */ infof(data, "SSL re-using session ID"); } Curl_ssl_sessionid_unlock(data); } #ifndef CURL_DISABLE_PROXY if(conn->proxy_ssl[sockindex].use) { BIO *const bio = BIO_new(BIO_f_ssl()); struct ssl_backend_data *proxy_backend; SSL* handle = NULL; proxy_backend = conn->proxy_ssl[sockindex].backend; DEBUGASSERT(proxy_backend); handle = proxy_backend->handle; DEBUGASSERT(ssl_connection_complete == conn->proxy_ssl[sockindex].state); DEBUGASSERT(handle != NULL); DEBUGASSERT(bio != NULL); BIO_set_ssl(bio, handle, FALSE); SSL_set_bio(backend->handle, bio, bio); } else #endif if(!SSL_set_fd(backend->handle, (int)sockfd)) { /* pass the raw socket into the SSL layers */ failf(data, "SSL: SSL_set_fd failed: %s", ossl_strerror(ERR_get_error(), error_buffer, sizeof(error_buffer))); return CURLE_SSL_CONNECT_ERROR; } connssl->connecting_state = ssl_connect_2; return CURLE_OK; } static CURLcode ossl_connect_step2(struct Curl_easy *data, struct connectdata *conn, int sockindex) { int err; struct ssl_connect_data *connssl = &conn->ssl[sockindex]; struct ssl_backend_data *backend = connssl->backend; DEBUGASSERT(ssl_connect_2 == connssl->connecting_state || ssl_connect_2_reading == connssl->connecting_state || ssl_connect_2_writing == connssl->connecting_state); DEBUGASSERT(backend); ERR_clear_error(); err = SSL_connect(backend->handle); #ifndef HAVE_KEYLOG_CALLBACK if(Curl_tls_keylog_enabled()) { /* If key logging is enabled, wait for the handshake to complete and then * proceed with logging secrets (for TLS 1.2 or older). */ ossl_log_tls12_secret(backend->handle, &backend->keylog_done); } #endif /* 1 is fine 0 is "not successful but was shut down controlled" <0 is "handshake was not successful, because a fatal error occurred" */ if(1 != err) { int detail = SSL_get_error(backend->handle, err); if(SSL_ERROR_WANT_READ == detail) { connssl->connecting_state = ssl_connect_2_reading; return CURLE_OK; } if(SSL_ERROR_WANT_WRITE == detail) { connssl->connecting_state = ssl_connect_2_writing; return CURLE_OK; } #ifdef SSL_ERROR_WANT_ASYNC if(SSL_ERROR_WANT_ASYNC == detail) { connssl->connecting_state = ssl_connect_2; return CURLE_OK; } #endif else { /* untreated error */ unsigned long errdetail; char error_buffer[256]=""; CURLcode result; long lerr; int lib; int reason; /* the connection failed, we're not waiting for anything else. */ connssl->connecting_state = ssl_connect_2; /* Get the earliest error code from the thread's error queue and remove the entry. */ errdetail = ERR_get_error(); /* Extract which lib and reason */ lib = ERR_GET_LIB(errdetail); reason = ERR_GET_REASON(errdetail); if((lib == ERR_LIB_SSL) && ((reason == SSL_R_CERTIFICATE_VERIFY_FAILED) || (reason == SSL_R_SSLV3_ALERT_CERTIFICATE_EXPIRED))) { result = CURLE_PEER_FAILED_VERIFICATION; lerr = SSL_get_verify_result(backend->handle); if(lerr != X509_V_OK) { SSL_SET_OPTION_LVALUE(certverifyresult) = lerr; msnprintf(error_buffer, sizeof(error_buffer), "SSL certificate problem: %s", X509_verify_cert_error_string(lerr)); } else /* strcpy() is fine here as long as the string fits within error_buffer */ strcpy(error_buffer, "SSL certificate verification failed"); } #if (OPENSSL_VERSION_NUMBER >= 0x10101000L && \ !defined(LIBRESSL_VERSION_NUMBER) && \ !defined(OPENSSL_IS_BORINGSSL)) /* SSL_R_TLSV13_ALERT_CERTIFICATE_REQUIRED is only available on OpenSSL version above v1.1.1, not LibreSSL nor BoringSSL */ else if((lib == ERR_LIB_SSL) && (reason == SSL_R_TLSV13_ALERT_CERTIFICATE_REQUIRED)) { /* If client certificate is required, communicate the error to client */ result = CURLE_SSL_CLIENTCERT; ossl_strerror(errdetail, error_buffer, sizeof(error_buffer)); } #endif else { result = CURLE_SSL_CONNECT_ERROR; ossl_strerror(errdetail, error_buffer, sizeof(error_buffer)); } /* detail is already set to the SSL error above */ /* If we e.g. use SSLv2 request-method and the server doesn't like us * (RST connection, etc.), OpenSSL gives no explanation whatsoever and * the SO_ERROR is also lost. */ if(CURLE_SSL_CONNECT_ERROR == result && errdetail == 0) { const char * const hostname = SSL_HOST_NAME(); const long int port = SSL_HOST_PORT(); char extramsg[80]=""; int sockerr = SOCKERRNO; if(sockerr && detail == SSL_ERROR_SYSCALL) Curl_strerror(sockerr, extramsg, sizeof(extramsg)); failf(data, OSSL_PACKAGE " SSL_connect: %s in connection to %s:%ld ", extramsg[0] ? extramsg : SSL_ERROR_to_str(detail), hostname, port); return result; } /* Could be a CERT problem */ failf(data, "%s", error_buffer); return result; } } else { /* we connected fine, we're not waiting for anything else. */ connssl->connecting_state = ssl_connect_3; /* Informational message */ infof(data, "SSL connection using %s / %s", SSL_get_version(backend->handle), SSL_get_cipher(backend->handle)); #ifdef HAS_ALPN /* Sets data and len to negotiated protocol, len is 0 if no protocol was * negotiated */ if(conn->bits.tls_enable_alpn) { const unsigned char *neg_protocol; unsigned int len; SSL_get0_alpn_selected(backend->handle, &neg_protocol, &len); if(len) { infof(data, VTLS_INFOF_ALPN_ACCEPTED_LEN_1STR, len, neg_protocol); #ifdef USE_HTTP2 if(len == ALPN_H2_LENGTH && !memcmp(ALPN_H2, neg_protocol, len)) { conn->alpn = CURL_HTTP_VERSION_2; } else #endif if(len == ALPN_HTTP_1_1_LENGTH && !memcmp(ALPN_HTTP_1_1, neg_protocol, ALPN_HTTP_1_1_LENGTH)) { conn->alpn = CURL_HTTP_VERSION_1_1; } } else infof(data, VTLS_INFOF_NO_ALPN); Curl_multiuse_state(data, conn->alpn == CURL_HTTP_VERSION_2 ? BUNDLE_MULTIPLEX : BUNDLE_NO_MULTIUSE); } #endif return CURLE_OK; } } /* * Heavily modified from: * https://www.owasp.org/index.php/Certificate_and_Public_Key_Pinning#OpenSSL */ static CURLcode pkp_pin_peer_pubkey(struct Curl_easy *data, X509* cert, const char *pinnedpubkey) { /* Scratch */ int len1 = 0, len2 = 0; unsigned char *buff1 = NULL, *temp = NULL; /* Result is returned to caller */ CURLcode result = CURLE_SSL_PINNEDPUBKEYNOTMATCH; /* if a path wasn't specified, don't pin */ if(!pinnedpubkey) return CURLE_OK; if(!cert) return result; do { /* Begin Gyrations to get the subjectPublicKeyInfo */ /* Thanks to Viktor Dukhovni on the OpenSSL mailing list */ /* https://groups.google.com/group/mailing.openssl.users/browse_thread /thread/d61858dae102c6c7 */ len1 = i2d_X509_PUBKEY(X509_get_X509_PUBKEY(cert), NULL); if(len1 < 1) break; /* failed */ buff1 = temp = malloc(len1); if(!buff1) break; /* failed */ /* https://www.openssl.org/docs/crypto/d2i_X509.html */ len2 = i2d_X509_PUBKEY(X509_get_X509_PUBKEY(cert), &temp); /* * These checks are verifying we got back the same values as when we * sized the buffer. It's pretty weak since they should always be the * same. But it gives us something to test. */ if((len1 != len2) || !temp || ((temp - buff1) != len1)) break; /* failed */ /* End Gyrations */ /* The one good exit point */ result = Curl_pin_peer_pubkey(data, pinnedpubkey, buff1, len1); } while(0); if(buff1) free(buff1); return result; } /* * Get the server cert, verify it and show it, etc., only call failf() if the * 'strict' argument is TRUE as otherwise all this is for informational * purposes only! * * We check certificates to authenticate the server; otherwise we risk * man-in-the-middle attack. */ static CURLcode servercert(struct Curl_easy *data, struct connectdata *conn, struct ssl_connect_data *connssl, bool strict) { CURLcode result = CURLE_OK; int rc; long lerr; X509 *issuer; BIO *fp = NULL; char error_buffer[256]=""; char buffer[2048]; const char *ptr; BIO *mem = BIO_new(BIO_s_mem()); struct ssl_backend_data *backend = connssl->backend; DEBUGASSERT(backend); if(!mem) { failf(data, "BIO_new return NULL, " OSSL_PACKAGE " error %s", ossl_strerror(ERR_get_error(), error_buffer, sizeof(error_buffer)) ); return CURLE_OUT_OF_MEMORY; } if(data->set.ssl.certinfo) /* asked to gather certificate info */ (void)Curl_ossl_certchain(data, connssl->backend->handle); backend->server_cert = SSL_get1_peer_certificate(backend->handle); if(!backend->server_cert) { BIO_free(mem); if(!strict) return CURLE_OK; failf(data, "SSL: couldn't get peer certificate"); return CURLE_PEER_FAILED_VERIFICATION; } infof(data, "%s certificate:", SSL_IS_PROXY() ? "Proxy" : "Server"); rc = x509_name_oneline(X509_get_subject_name(backend->server_cert), buffer, sizeof(buffer)); infof(data, " subject: %s", rc?"[NONE]":buffer); #ifndef CURL_DISABLE_VERBOSE_STRINGS { long len; ASN1_TIME_print(mem, X509_get0_notBefore(backend->server_cert)); len = BIO_get_mem_data(mem, (char **) &ptr); infof(data, " start date: %.*s", (int)len, ptr); (void)BIO_reset(mem); ASN1_TIME_print(mem, X509_get0_notAfter(backend->server_cert)); len = BIO_get_mem_data(mem, (char **) &ptr); infof(data, " expire date: %.*s", (int)len, ptr); (void)BIO_reset(mem); } #endif BIO_free(mem); if(SSL_CONN_CONFIG(verifyhost)) { result = Curl_ossl_verifyhost(data, conn, backend->server_cert); if(result) { X509_free(backend->server_cert); backend->server_cert = NULL; return result; } } rc = x509_name_oneline(X509_get_issuer_name(backend->server_cert), buffer, sizeof(buffer)); if(rc) { if(strict) failf(data, "SSL: couldn't get X509-issuer name"); result = CURLE_PEER_FAILED_VERIFICATION; } else { infof(data, " issuer: %s", buffer); /* We could do all sorts of certificate verification stuff here before deallocating the certificate. */ /* e.g. match issuer name with provided issuer certificate */ if(SSL_CONN_CONFIG(issuercert) || SSL_CONN_CONFIG(issuercert_blob)) { if(SSL_CONN_CONFIG(issuercert_blob)) { fp = BIO_new_mem_buf(SSL_CONN_CONFIG(issuercert_blob)->data, (int)SSL_CONN_CONFIG(issuercert_blob)->len); if(!fp) { failf(data, "BIO_new_mem_buf NULL, " OSSL_PACKAGE " error %s", ossl_strerror(ERR_get_error(), error_buffer, sizeof(error_buffer)) ); X509_free(backend->server_cert); backend->server_cert = NULL; return CURLE_OUT_OF_MEMORY; } } else { fp = BIO_new(BIO_s_file()); if(!fp) { failf(data, "BIO_new return NULL, " OSSL_PACKAGE " error %s", ossl_strerror(ERR_get_error(), error_buffer, sizeof(error_buffer)) ); X509_free(backend->server_cert); backend->server_cert = NULL; return CURLE_OUT_OF_MEMORY; } if(BIO_read_filename(fp, SSL_CONN_CONFIG(issuercert)) <= 0) { if(strict) failf(data, "SSL: Unable to open issuer cert (%s)", SSL_CONN_CONFIG(issuercert)); BIO_free(fp); X509_free(backend->server_cert); backend->server_cert = NULL; return CURLE_SSL_ISSUER_ERROR; } } issuer = PEM_read_bio_X509(fp, NULL, ZERO_NULL, NULL); if(!issuer) { if(strict) failf(data, "SSL: Unable to read issuer cert (%s)", SSL_CONN_CONFIG(issuercert)); BIO_free(fp); X509_free(issuer); X509_free(backend->server_cert); backend->server_cert = NULL; return CURLE_SSL_ISSUER_ERROR; } if(X509_check_issued(issuer, backend->server_cert) != X509_V_OK) { if(strict) failf(data, "SSL: Certificate issuer check failed (%s)", SSL_CONN_CONFIG(issuercert)); BIO_free(fp); X509_free(issuer); X509_free(backend->server_cert); backend->server_cert = NULL; return CURLE_SSL_ISSUER_ERROR; } infof(data, " SSL certificate issuer check ok (%s)", SSL_CONN_CONFIG(issuercert)); BIO_free(fp); X509_free(issuer); } lerr = SSL_get_verify_result(backend->handle); SSL_SET_OPTION_LVALUE(certverifyresult) = lerr; if(lerr != X509_V_OK) { if(SSL_CONN_CONFIG(verifypeer)) { /* We probably never reach this, because SSL_connect() will fail and we return earlier if verifypeer is set? */ if(strict) failf(data, "SSL certificate verify result: %s (%ld)", X509_verify_cert_error_string(lerr), lerr); result = CURLE_PEER_FAILED_VERIFICATION; } else infof(data, " SSL certificate verify result: %s (%ld)," " continuing anyway.", X509_verify_cert_error_string(lerr), lerr); } else infof(data, " SSL certificate verify ok."); } #if (OPENSSL_VERSION_NUMBER >= 0x0090808fL) && !defined(OPENSSL_NO_TLSEXT) && \ !defined(OPENSSL_NO_OCSP) if(SSL_CONN_CONFIG(verifystatus)) { result = verifystatus(data, connssl); if(result) { X509_free(backend->server_cert); backend->server_cert = NULL; return result; } } #endif if(!strict) /* when not strict, we don't bother about the verify cert problems */ result = CURLE_OK; ptr = SSL_PINNED_PUB_KEY(); if(!result && ptr) { result = pkp_pin_peer_pubkey(data, backend->server_cert, ptr); if(result) failf(data, "SSL: public key does not match pinned public key"); } X509_free(backend->server_cert); backend->server_cert = NULL; connssl->connecting_state = ssl_connect_done; return result; } static CURLcode ossl_connect_step3(struct Curl_easy *data, struct connectdata *conn, int sockindex) { CURLcode result = CURLE_OK; struct ssl_connect_data *connssl = &conn->ssl[sockindex]; DEBUGASSERT(ssl_connect_3 == connssl->connecting_state); /* * We check certificates to authenticate the server; otherwise we risk * man-in-the-middle attack; NEVERTHELESS, if we're told explicitly not to * verify the peer, ignore faults and failures from the server cert * operations. */ result = servercert(data, conn, connssl, (SSL_CONN_CONFIG(verifypeer) || SSL_CONN_CONFIG(verifyhost))); if(!result) connssl->connecting_state = ssl_connect_done; return result; } static Curl_recv ossl_recv; static Curl_send ossl_send; static CURLcode ossl_connect_common(struct Curl_easy *data, struct connectdata *conn, int sockindex, bool nonblocking, bool *done) { CURLcode result; struct ssl_connect_data *connssl = &conn->ssl[sockindex]; curl_socket_t sockfd = conn->sock[sockindex]; int what; /* check if the connection has already been established */ if(ssl_connection_complete == connssl->state) { *done = TRUE; return CURLE_OK; } if(ssl_connect_1 == connssl->connecting_state) { /* Find out how much more time we're allowed */ const timediff_t timeout_ms = Curl_timeleft(data, NULL, TRUE); if(timeout_ms < 0) { /* no need to continue if time is already up */ failf(data, "SSL connection timeout"); return CURLE_OPERATION_TIMEDOUT; } result = ossl_connect_step1(data, conn, sockindex); if(result) return result; } while(ssl_connect_2 == connssl->connecting_state || ssl_connect_2_reading == connssl->connecting_state || ssl_connect_2_writing == connssl->connecting_state) { /* check allowed time left */ const timediff_t timeout_ms = Curl_timeleft(data, NULL, TRUE); if(timeout_ms < 0) { /* no need to continue if time already is up */ failf(data, "SSL connection timeout"); return CURLE_OPERATION_TIMEDOUT; } /* if ssl is expecting something, check if it's available. */ if(connssl->connecting_state == ssl_connect_2_reading || connssl->connecting_state == ssl_connect_2_writing) { curl_socket_t writefd = ssl_connect_2_writing == connssl->connecting_state?sockfd:CURL_SOCKET_BAD; curl_socket_t readfd = ssl_connect_2_reading == connssl->connecting_state?sockfd:CURL_SOCKET_BAD; what = Curl_socket_check(readfd, CURL_SOCKET_BAD, writefd, nonblocking?0:timeout_ms); if(what < 0) { /* fatal error */ failf(data, "select/poll on SSL socket, errno: %d", SOCKERRNO); return CURLE_SSL_CONNECT_ERROR; } if(0 == what) { if(nonblocking) { *done = FALSE; return CURLE_OK; } /* timeout */ failf(data, "SSL connection timeout"); return CURLE_OPERATION_TIMEDOUT; } /* socket is readable or writable */ } /* Run transaction, and return to the caller if it failed or if this * connection is done nonblocking and this loop would execute again. This * permits the owner of a multi handle to abort a connection attempt * before step2 has completed while ensuring that a client using select() * or epoll() will always have a valid fdset to wait on. */ result = ossl_connect_step2(data, conn, sockindex); if(result || (nonblocking && (ssl_connect_2 == connssl->connecting_state || ssl_connect_2_reading == connssl->connecting_state || ssl_connect_2_writing == connssl->connecting_state))) return result; } /* repeat step2 until all transactions are done. */ if(ssl_connect_3 == connssl->connecting_state) { result = ossl_connect_step3(data, conn, sockindex); if(result) return result; } if(ssl_connect_done == connssl->connecting_state) { connssl->state = ssl_connection_complete; conn->recv[sockindex] = ossl_recv; conn->send[sockindex] = ossl_send; *done = TRUE; } else *done = FALSE; /* Reset our connect state machine */ connssl->connecting_state = ssl_connect_1; return CURLE_OK; } static CURLcode ossl_connect_nonblocking(struct Curl_easy *data, struct connectdata *conn, int sockindex, bool *done) { return ossl_connect_common(data, conn, sockindex, TRUE, done); } static CURLcode ossl_connect(struct Curl_easy *data, struct connectdata *conn, int sockindex) { CURLcode result; bool done = FALSE; result = ossl_connect_common(data, conn, sockindex, FALSE, &done); if(result) return result; DEBUGASSERT(done); return CURLE_OK; } static bool ossl_data_pending(const struct connectdata *conn, int connindex) { const struct ssl_connect_data *connssl = &conn->ssl[connindex]; DEBUGASSERT(connssl->backend); if(connssl->backend->handle && SSL_pending(connssl->backend->handle)) return TRUE; #ifndef CURL_DISABLE_PROXY { const struct ssl_connect_data *proxyssl = &conn->proxy_ssl[connindex]; DEBUGASSERT(proxyssl->backend); if(proxyssl->backend->handle && SSL_pending(proxyssl->backend->handle)) return TRUE; } #endif return FALSE; } static size_t ossl_version(char *buffer, size_t size); static ssize_t ossl_send(struct Curl_easy *data, int sockindex, const void *mem, size_t len, CURLcode *curlcode) { /* SSL_write() is said to return 'int' while write() and send() returns 'size_t' */ int err; char error_buffer[256]; unsigned long sslerror; int memlen; int rc; struct connectdata *conn = data->conn; struct ssl_connect_data *connssl = &conn->ssl[sockindex]; struct ssl_backend_data *backend = connssl->backend; DEBUGASSERT(backend); ERR_clear_error(); memlen = (len > (size_t)INT_MAX) ? INT_MAX : (int)len; set_logger(conn, data); rc = SSL_write(backend->handle, mem, memlen); if(rc <= 0) { err = SSL_get_error(backend->handle, rc); switch(err) { case SSL_ERROR_WANT_READ: case SSL_ERROR_WANT_WRITE: /* The operation did not complete; the same TLS/SSL I/O function should be called again later. This is basically an EWOULDBLOCK equivalent. */ *curlcode = CURLE_AGAIN; return -1; case SSL_ERROR_SYSCALL: { int sockerr = SOCKERRNO; sslerror = ERR_get_error(); if(sslerror) ossl_strerror(sslerror, error_buffer, sizeof(error_buffer)); else if(sockerr) Curl_strerror(sockerr, error_buffer, sizeof(error_buffer)); else { strncpy(error_buffer, SSL_ERROR_to_str(err), sizeof(error_buffer)); error_buffer[sizeof(error_buffer) - 1] = '\0'; } failf(data, OSSL_PACKAGE " SSL_write: %s, errno %d", error_buffer, sockerr); *curlcode = CURLE_SEND_ERROR; return -1; } case SSL_ERROR_SSL: /* A failure in the SSL library occurred, usually a protocol error. The OpenSSL error queue contains more information on the error. */ sslerror = ERR_get_error(); if(ERR_GET_LIB(sslerror) == ERR_LIB_SSL && ERR_GET_REASON(sslerror) == SSL_R_BIO_NOT_SET && conn->ssl[sockindex].state == ssl_connection_complete #ifndef CURL_DISABLE_PROXY && conn->proxy_ssl[sockindex].state == ssl_connection_complete #endif ) { char ver[120]; (void)ossl_version(ver, sizeof(ver)); failf(data, "Error: %s does not support double SSL tunneling.", ver); } else failf(data, "SSL_write() error: %s", ossl_strerror(sslerror, error_buffer, sizeof(error_buffer))); *curlcode = CURLE_SEND_ERROR; return -1; } /* a true error */ failf(data, OSSL_PACKAGE " SSL_write: %s, errno %d", SSL_ERROR_to_str(err), SOCKERRNO); *curlcode = CURLE_SEND_ERROR; return -1; } *curlcode = CURLE_OK; return (ssize_t)rc; /* number of bytes */ } static ssize_t ossl_recv(struct Curl_easy *data, /* transfer */ int num, /* socketindex */ char *buf, /* store read data here */ size_t buffersize, /* max amount to read */ CURLcode *curlcode) { char error_buffer[256]; unsigned long sslerror; ssize_t nread; int buffsize; struct connectdata *conn = data->conn; struct ssl_connect_data *connssl = &conn->ssl[num]; struct ssl_backend_data *backend = connssl->backend; DEBUGASSERT(backend); ERR_clear_error(); buffsize = (buffersize > (size_t)INT_MAX) ? INT_MAX : (int)buffersize; set_logger(conn, data); nread = (ssize_t)SSL_read(backend->handle, buf, buffsize); if(nread <= 0) { /* failed SSL_read */ int err = SSL_get_error(backend->handle, (int)nread); switch(err) { case SSL_ERROR_NONE: /* this is not an error */ break; case SSL_ERROR_ZERO_RETURN: /* no more data */ /* close_notify alert */ if(num == FIRSTSOCKET) /* mark the connection for close if it is indeed the control connection */ connclose(conn, "TLS close_notify"); break; case SSL_ERROR_WANT_READ: case SSL_ERROR_WANT_WRITE: /* there's data pending, re-invoke SSL_read() */ *curlcode = CURLE_AGAIN; return -1; default: /* openssl/ssl.h for SSL_ERROR_SYSCALL says "look at error stack/return value/errno" */ /* https://www.openssl.org/docs/crypto/ERR_get_error.html */ sslerror = ERR_get_error(); if((nread < 0) || sslerror) { /* If the return code was negative or there actually is an error in the queue */ int sockerr = SOCKERRNO; if(sslerror) ossl_strerror(sslerror, error_buffer, sizeof(error_buffer)); else if(sockerr && err == SSL_ERROR_SYSCALL) Curl_strerror(sockerr, error_buffer, sizeof(error_buffer)); else { strncpy(error_buffer, SSL_ERROR_to_str(err), sizeof(error_buffer)); error_buffer[sizeof(error_buffer) - 1] = '\0'; } failf(data, OSSL_PACKAGE " SSL_read: %s, errno %d", error_buffer, sockerr); *curlcode = CURLE_RECV_ERROR; return -1; } /* For debug builds be a little stricter and error on any SSL_ERROR_SYSCALL. For example a server may have closed the connection abruptly without a close_notify alert. For compatibility with older peers we don't do this by default. #4624 We can use this to gauge how many users may be affected, and if it goes ok eventually transition to allow in dev and release with the newest OpenSSL: #if (OPENSSL_VERSION_NUMBER >= 0x10101000L) */ #ifdef DEBUGBUILD if(err == SSL_ERROR_SYSCALL) { int sockerr = SOCKERRNO; if(sockerr) Curl_strerror(sockerr, error_buffer, sizeof(error_buffer)); else { msnprintf(error_buffer, sizeof(error_buffer), "Connection closed abruptly"); } failf(data, OSSL_PACKAGE " SSL_read: %s, errno %d" " (Fatal because this is a curl debug build)", error_buffer, sockerr); *curlcode = CURLE_RECV_ERROR; return -1; } #endif } } return nread; } static size_t ossl_version(char *buffer, size_t size) { #ifdef LIBRESSL_VERSION_NUMBER #ifdef HAVE_OPENSSL_VERSION char *p; int count; const char *ver = OpenSSL_version(OPENSSL_VERSION); const char expected[] = OSSL_PACKAGE " "; /* ie "LibreSSL " */ if(strncasecompare(ver, expected, sizeof(expected) - 1)) { ver += sizeof(expected) - 1; } count = msnprintf(buffer, size, "%s/%s", OSSL_PACKAGE, ver); for(p = buffer; *p; ++p) { if(ISBLANK(*p)) *p = '_'; } return count; #else return msnprintf(buffer, size, "%s/%lx.%lx.%lx", OSSL_PACKAGE, (LIBRESSL_VERSION_NUMBER>>28)&0xf, (LIBRESSL_VERSION_NUMBER>>20)&0xff, (LIBRESSL_VERSION_NUMBER>>12)&0xff); #endif #elif defined(OPENSSL_IS_BORINGSSL) #ifdef CURL_BORINGSSL_VERSION return msnprintf(buffer, size, "%s/%s", OSSL_PACKAGE, CURL_BORINGSSL_VERSION); #else return msnprintf(buffer, size, OSSL_PACKAGE); #endif #elif defined(HAVE_OPENSSL_VERSION) && defined(OPENSSL_VERSION_STRING) return msnprintf(buffer, size, "%s/%s", OSSL_PACKAGE, OpenSSL_version(OPENSSL_VERSION_STRING)); #else /* not LibreSSL, BoringSSL and not using OpenSSL_version */ char sub[3]; unsigned long ssleay_value; sub[2]='\0'; sub[1]='\0'; ssleay_value = OpenSSL_version_num(); if(ssleay_value < 0x906000) { ssleay_value = SSLEAY_VERSION_NUMBER; sub[0]='\0'; } else { if(ssleay_value&0xff0) { int minor_ver = (ssleay_value >> 4) & 0xff; if(minor_ver > 26) { /* handle extended version introduced for 0.9.8za */ sub[1] = (char) ((minor_ver - 1) % 26 + 'a' + 1); sub[0] = 'z'; } else { sub[0] = (char) (minor_ver + 'a' - 1); } } else sub[0]='\0'; } return msnprintf(buffer, size, "%s/%lx.%lx.%lx%s" #ifdef OPENSSL_FIPS "-fips" #endif , OSSL_PACKAGE, (ssleay_value>>28)&0xf, (ssleay_value>>20)&0xff, (ssleay_value>>12)&0xff, sub); #endif /* OPENSSL_IS_BORINGSSL */ } /* can be called with data == NULL */ static CURLcode ossl_random(struct Curl_easy *data, unsigned char *entropy, size_t length) { int rc; if(data) { if(ossl_seed(data)) /* Initiate the seed if not already done */ return CURLE_FAILED_INIT; /* couldn't seed for some reason */ } else { if(!rand_enough()) return CURLE_FAILED_INIT; } /* RAND_bytes() returns 1 on success, 0 otherwise. */ rc = RAND_bytes(entropy, curlx_uztosi(length)); return (rc == 1 ? CURLE_OK : CURLE_FAILED_INIT); } #if (OPENSSL_VERSION_NUMBER >= 0x0090800fL) && !defined(OPENSSL_NO_SHA256) static CURLcode ossl_sha256sum(const unsigned char *tmp, /* input */ size_t tmplen, unsigned char *sha256sum /* output */, size_t unused) { EVP_MD_CTX *mdctx; unsigned int len = 0; (void) unused; mdctx = EVP_MD_CTX_create(); if(!mdctx) return CURLE_OUT_OF_MEMORY; EVP_DigestInit(mdctx, EVP_sha256()); EVP_DigestUpdate(mdctx, tmp, tmplen); EVP_DigestFinal_ex(mdctx, sha256sum, &len); EVP_MD_CTX_destroy(mdctx); return CURLE_OK; } #endif static bool ossl_cert_status_request(void) { #if (OPENSSL_VERSION_NUMBER >= 0x0090808fL) && !defined(OPENSSL_NO_TLSEXT) && \ !defined(OPENSSL_NO_OCSP) return TRUE; #else return FALSE; #endif } static void *ossl_get_internals(struct ssl_connect_data *connssl, CURLINFO info) { /* Legacy: CURLINFO_TLS_SESSION must return an SSL_CTX pointer. */ struct ssl_backend_data *backend = connssl->backend; DEBUGASSERT(backend); return info == CURLINFO_TLS_SESSION ? (void *)backend->ctx : (void *)backend->handle; } static bool ossl_associate_connection(struct Curl_easy *data, struct connectdata *conn, int sockindex) { struct ssl_connect_data *connssl = &conn->ssl[sockindex]; struct ssl_backend_data *backend = connssl->backend; DEBUGASSERT(backend); /* If we don't have SSL context, do nothing. */ if(!backend->handle) return FALSE; if(SSL_SET_OPTION(primary.sessionid)) { int data_idx = ossl_get_ssl_data_index(); int connectdata_idx = ossl_get_ssl_conn_index(); int sockindex_idx = ossl_get_ssl_sockindex_index(); int proxy_idx = ossl_get_proxy_index(); if(data_idx >= 0 && connectdata_idx >= 0 && sockindex_idx >= 0 && proxy_idx >= 0) { int data_status, conn_status, sockindex_status, proxy_status; /* Store the data needed for the "new session" callback. * The sockindex is stored as a pointer to an array element. */ data_status = SSL_set_ex_data(backend->handle, data_idx, data); conn_status = SSL_set_ex_data(backend->handle, connectdata_idx, conn); sockindex_status = SSL_set_ex_data(backend->handle, sockindex_idx, conn->sock + sockindex); #ifndef CURL_DISABLE_PROXY proxy_status = SSL_set_ex_data(backend->handle, proxy_idx, SSL_IS_PROXY() ? (void *) 1 : NULL); #else proxy_status = SSL_set_ex_data(backend->handle, proxy_idx, NULL); #endif if(data_status && conn_status && sockindex_status && proxy_status) return TRUE; } return FALSE; } return TRUE; } /* * Starting with TLS 1.3, the ossl_new_session_cb callback gets called after * the handshake. If the transfer that sets up the callback gets killed before * this callback arrives, we must make sure to properly clear the data to * avoid UAF problems. A future optimization could be to instead store another * transfer that might still be using the same connection. */ static void ossl_disassociate_connection(struct Curl_easy *data, int sockindex) { struct connectdata *conn = data->conn; struct ssl_connect_data *connssl = &conn->ssl[sockindex]; struct ssl_backend_data *backend = connssl->backend; DEBUGASSERT(backend); /* If we don't have SSL context, do nothing. */ if(!backend->handle) return; if(SSL_SET_OPTION(primary.sessionid)) { int data_idx = ossl_get_ssl_data_index(); int connectdata_idx = ossl_get_ssl_conn_index(); int sockindex_idx = ossl_get_ssl_sockindex_index(); int proxy_idx = ossl_get_proxy_index(); if(data_idx >= 0 && connectdata_idx >= 0 && sockindex_idx >= 0 && proxy_idx >= 0) { /* Disable references to data in "new session" callback to avoid * accessing a stale pointer. */ SSL_set_ex_data(backend->handle, data_idx, NULL); SSL_set_ex_data(backend->handle, connectdata_idx, NULL); SSL_set_ex_data(backend->handle, sockindex_idx, NULL); SSL_set_ex_data(backend->handle, proxy_idx, NULL); } } } static void ossl_free_multi_ssl_backend_data( struct multi_ssl_backend_data *mbackend) { #if defined(HAVE_SSL_X509_STORE_SHARE) if(mbackend->store) { X509_STORE_free(mbackend->store); } free(mbackend->CAfile); free(mbackend); #else /* HAVE_SSL_X509_STORE_SHARE */ (void)mbackend; #endif /* HAVE_SSL_X509_STORE_SHARE */ } const struct Curl_ssl Curl_ssl_openssl = { { CURLSSLBACKEND_OPENSSL, "openssl" }, /* info */ SSLSUPP_CA_PATH | SSLSUPP_CAINFO_BLOB | SSLSUPP_CERTINFO | SSLSUPP_PINNEDPUBKEY | SSLSUPP_SSL_CTX | #ifdef HAVE_SSL_CTX_SET_CIPHERSUITES SSLSUPP_TLS13_CIPHERSUITES | #endif SSLSUPP_HTTPS_PROXY, sizeof(struct ssl_backend_data), ossl_init, /* init */ ossl_cleanup, /* cleanup */ ossl_version, /* version */ ossl_check_cxn, /* check_cxn */ ossl_shutdown, /* shutdown */ ossl_data_pending, /* data_pending */ ossl_random, /* random */ ossl_cert_status_request, /* cert_status_request */ ossl_connect, /* connect */ ossl_connect_nonblocking, /* connect_nonblocking */ Curl_ssl_getsock, /* getsock */ ossl_get_internals, /* get_internals */ ossl_close, /* close_one */ ossl_close_all, /* close_all */ ossl_session_free, /* session_free */ ossl_set_engine, /* set_engine */ ossl_set_engine_default, /* set_engine_default */ ossl_engines_list, /* engines_list */ Curl_none_false_start, /* false_start */ #if (OPENSSL_VERSION_NUMBER >= 0x0090800fL) && !defined(OPENSSL_NO_SHA256) ossl_sha256sum, /* sha256sum */ #else NULL, /* sha256sum */ #endif ossl_associate_connection, /* associate_connection */ ossl_disassociate_connection, /* disassociate_connection */ ossl_free_multi_ssl_backend_data /* free_multi_ssl_backend_data */ }; #endif /* USE_OPENSSL */