/*************************************************************************** * _ _ ____ _ * Project ___| | | | _ \| | * / __| | | | |_) | | * | (__| |_| | _ <| |___ * \___|\___/|_| \_\_____| * * Copyright (C) Daniel Stenberg, , et al. * * This software is licensed as described in the file COPYING, which * you should have received as part of this distribution. The terms * are also available at https://curl.se/docs/copyright.html. * * You may opt to use, copy, modify, merge, publish, distribute and/or sell * copies of the Software, and permit persons to whom the Software is * furnished to do so, under the terms of the COPYING file. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * * SPDX-License-Identifier: curl * ***************************************************************************/ /* Now include the curl_setup.h file from libcurl's private libdir (the source version, but that might include "curl_config.h" from the build dir so we need both of them in the include path), so that we get good in-depth knowledge about the system we're building this on */ #define CURL_NO_OLDIES #include "curl_setup.h" #include #ifdef HAVE_SYS_SELECT_H /* since so many tests use select(), we can just as well include it here */ #include #elif defined(HAVE_UNISTD_H) #include #endif #include "curl_printf.h" #ifdef _WIN32 #define sleep(sec) Sleep ((sec)*1000) #endif #define test_setopt(A,B,C) \ if((res = curl_easy_setopt((A), (B), (C))) != CURLE_OK) \ goto test_cleanup #define test_multi_setopt(A,B,C) \ if((res = curl_multi_setopt((A), (B), (C))) != CURLE_OK) \ goto test_cleanup extern char *libtest_arg2; /* set by first.c to the argv[2] or NULL */ extern char *libtest_arg3; /* set by first.c to the argv[3] or NULL */ /* argc and argv as passed in to the main() function */ extern int test_argc; extern char **test_argv; extern struct timeval tv_test_start; /* for test timing */ extern int select_wrapper(int nfds, fd_set *rd, fd_set *wr, fd_set *exc, struct timeval *tv); extern void wait_ms(int ms); /* wait this many milliseconds */ extern CURLcode test(char *URL); /* the actual test function provided by each individual libXXX.c file */ extern char *hexdump(const unsigned char *buffer, size_t len); extern int unitfail; /* ** TEST_ERR_* values must be greater than CURL_LAST CURLcode in order ** to avoid confusion with any CURLcode or CURLMcode. These TEST_ERR_* ** codes are returned to signal test specific situations and should ** not get mixed with CURLcode or CURLMcode values. ** ** For portability reasons TEST_ERR_* values should be less than 127. */ #define TEST_ERR_MAJOR_BAD (CURLcode) 126 #define TEST_ERR_RUNS_FOREVER (CURLcode) 125 #define TEST_ERR_EASY_INIT (CURLcode) 124 #define TEST_ERR_MULTI (CURLcode) 123 #define TEST_ERR_NUM_HANDLES (CURLcode) 122 #define TEST_ERR_SELECT (CURLcode) 121 #define TEST_ERR_SUCCESS (CURLcode) 120 #define TEST_ERR_FAILURE (CURLcode) 119 #define TEST_ERR_USAGE (CURLcode) 118 #define TEST_ERR_FOPEN (CURLcode) 117 #define TEST_ERR_FSTAT (CURLcode) 116 #define TEST_ERR_BAD_TIMEOUT (CURLcode) 115 /* ** Macros for test source code readability/maintainability. ** ** All of the following macros require that an int data type 'res' variable ** exists in scope where macro is used, and that it has been initialized to ** zero before the macro is used. ** ** exe_* and chk_* macros are helper macros not intended to be used from ** outside of this header file. Arguments 'Y' and 'Z' of these represent ** source code file and line number, while Arguments 'A', 'B', etc, are ** the arguments used to actually call a libcurl function. ** ** All easy_* and multi_* macros call a libcurl function and evaluate if ** the function has succeeded or failed. When the function succeeds 'res' ** variable is not set nor cleared and program continues normal flow. On ** the other hand if function fails 'res' variable is set and a jump to ** label 'test_cleanup' is performed. ** ** Every easy_* and multi_* macros have a res_easy_* and res_multi_* macro ** counterpart that operates in the same way with the exception that no ** jump takes place in case of failure. res_easy_* and res_multi_* macros ** should be immediately followed by checking if 'res' variable has been ** set. ** ** 'res' variable when set will hold a CURLcode, CURLMcode, or any of the ** TEST_ERR_* values defined above. It is advisable to return this value ** as test result. */ /* ---------------------------------------------------------------- */ #define exe_easy_init(A,Y,Z) do { \ if(((A) = curl_easy_init()) == NULL) { \ fprintf(stderr, "%s:%d curl_easy_init() failed\n", (Y), (Z)); \ res = TEST_ERR_EASY_INIT; \ } \ } while(0) #define res_easy_init(A) \ exe_easy_init((A), (__FILE__), (__LINE__)) #define chk_easy_init(A,Y,Z) do { \ exe_easy_init((A), (Y), (Z)); \ if(res) \ goto test_cleanup; \ } while(0) #define easy_init(A) \ chk_easy_init((A), (__FILE__), (__LINE__)) /* ---------------------------------------------------------------- */ #define exe_multi_init(A,Y,Z) do { \ if(((A) = curl_multi_init()) == NULL) { \ fprintf(stderr, "%s:%d curl_multi_init() failed\n", (Y), (Z)); \ res = TEST_ERR_MULTI; \ } \ } while(0) #define res_multi_init(A) \ exe_multi_init((A), (__FILE__), (__LINE__)) #define chk_multi_init(A,Y,Z) do { \ exe_multi_init((A), (Y), (Z)); \ if(res) \ goto test_cleanup; \ } while(0) #define multi_init(A) \ chk_multi_init((A), (__FILE__), (__LINE__)) /* ---------------------------------------------------------------- */ #define exe_easy_setopt(A,B,C,Y,Z) do { \ CURLcode ec; \ if((ec = curl_easy_setopt((A), (B), (C))) != CURLE_OK) { \ fprintf(stderr, "%s:%d curl_easy_setopt() failed, " \ "with code %d (%s)\n", \ (Y), (Z), (int)ec, curl_easy_strerror(ec)); \ res = ec; \ } \ } while(0) #define res_easy_setopt(A, B, C) \ exe_easy_setopt((A), (B), (C), (__FILE__), (__LINE__)) #define chk_easy_setopt(A, B, C, Y, Z) do { \ exe_easy_setopt((A), (B), (C), (Y), (Z)); \ if(res) \ goto test_cleanup; \ } while(0) #define easy_setopt(A, B, C) \ chk_easy_setopt((A), (B), (C), (__FILE__), (__LINE__)) /* ---------------------------------------------------------------- */ #define exe_multi_setopt(A, B, C, Y, Z) do { \ CURLMcode ec; \ if((ec = curl_multi_setopt((A), (B), (C))) != CURLM_OK) { \ fprintf(stderr, "%s:%d curl_multi_setopt() failed, " \ "with code %d (%s)\n", \ (Y), (Z), (int)ec, curl_multi_strerror(ec)); \ res = TEST_ERR_MULTI; \ } \ } while(0) #define res_multi_setopt(A,B,C) \ exe_multi_setopt((A), (B), (C), (__FILE__), (__LINE__)) #define chk_multi_setopt(A,B,C,Y,Z) do { \ exe_multi_setopt((A), (B), (C), (Y), (Z)); \ if(res) \ goto test_cleanup; \ } while(0) #define multi_setopt(A,B,C) \ chk_multi_setopt((A), (B), (C), (__FILE__), (__LINE__)) /* ---------------------------------------------------------------- */ #define exe_multi_add_handle(A,B,Y,Z) do { \ CURLMcode ec; \ if((ec = curl_multi_add_handle((A), (B))) != CURLM_OK) { \ fprintf(stderr, "%s:%d curl_multi_add_handle() failed, " \ "with code %d (%s)\n", \ (Y), (Z), (int)ec, curl_multi_strerror(ec)); \ res = TEST_ERR_MULTI; \ } \ } while(0) #define res_multi_add_handle(A, B) \ exe_multi_add_handle((A), (B), (__FILE__), (__LINE__)) #define chk_multi_add_handle(A, B, Y, Z) do { \ exe_multi_add_handle((A), (B), (Y), (Z)); \ if(res) \ goto test_cleanup; \ } while(0) #define multi_add_handle(A, B) \ chk_multi_add_handle((A), (B), (__FILE__), (__LINE__)) /* ---------------------------------------------------------------- */ #define exe_multi_remove_handle(A,B,Y,Z) do { \ CURLMcode ec; \ if((ec = curl_multi_remove_handle((A), (B))) != CURLM_OK) { \ fprintf(stderr, "%s:%d curl_multi_remove_handle() failed, " \ "with code %d (%s)\n", \ (Y), (Z), (int)ec, curl_multi_strerror(ec)); \ res = TEST_ERR_MULTI; \ } \ } while(0) #define res_multi_remove_handle(A, B) \ exe_multi_remove_handle((A), (B), (__FILE__), (__LINE__)) #define chk_multi_remove_handle(A, B, Y, Z) do { \ exe_multi_remove_handle((A), (B), (Y), (Z)); \ if(res) \ goto test_cleanup; \ } while(0) #define multi_remove_handle(A, B) \ chk_multi_remove_handle((A), (B), (__FILE__), (__LINE__)) /* ---------------------------------------------------------------- */ #define exe_multi_perform(A,B,Y,Z) do { \ CURLMcode ec; \ if((ec = curl_multi_perform((A), (B))) != CURLM_OK) { \ fprintf(stderr, "%s:%d curl_multi_perform() failed, " \ "with code %d (%s)\n", \ (Y), (Z), (int)ec, curl_multi_strerror(ec)); \ res = TEST_ERR_MULTI; \ } \ else if(*((B)) < 0) { \ fprintf(stderr, "%s:%d curl_multi_perform() succeeded, " \ "but returned invalid running_handles value (%d)\n", \ (Y), (Z), (int)*((B))); \ res = TEST_ERR_NUM_HANDLES; \ } \ } while(0) #define res_multi_perform(A, B) \ exe_multi_perform((A), (B), (__FILE__), (__LINE__)) #define chk_multi_perform(A, B, Y, Z) do { \ exe_multi_perform((A), (B), (Y), (Z)); \ if(res) \ goto test_cleanup; \ } while(0) #define multi_perform(A,B) \ chk_multi_perform((A), (B), (__FILE__), (__LINE__)) /* ---------------------------------------------------------------- */ #define exe_multi_fdset(A, B, C, D, E, Y, Z) do { \ CURLMcode ec; \ if((ec = curl_multi_fdset((A), (B), (C), (D), (E))) != CURLM_OK) { \ fprintf(stderr, "%s:%d curl_multi_fdset() failed, " \ "with code %d (%s)\n", \ (Y), (Z), (int)ec, curl_multi_strerror(ec)); \ res = TEST_ERR_MULTI; \ } \ else if(*((E)) < -1) { \ fprintf(stderr, "%s:%d curl_multi_fdset() succeeded, " \ "but returned invalid max_fd value (%d)\n", \ (Y), (Z), (int)*((E))); \ res = TEST_ERR_NUM_HANDLES; \ } \ } while(0) #define res_multi_fdset(A, B, C, D, E) \ exe_multi_fdset((A), (B), (C), (D), (E), (__FILE__), (__LINE__)) #define chk_multi_fdset(A, B, C, D, E, Y, Z) do { \ exe_multi_fdset((A), (B), (C), (D), (E), (Y), (Z)); \ if(res) \ goto test_cleanup; \ } while(0) #define multi_fdset(A, B, C, D, E) \ chk_multi_fdset((A), (B), (C), (D), (E), (__FILE__), (__LINE__)) /* ---------------------------------------------------------------- */ #define exe_multi_timeout(A,B,Y,Z) do { \ CURLMcode ec; \ if((ec = curl_multi_timeout((A), (B))) != CURLM_OK) { \ fprintf(stderr, "%s:%d curl_multi_timeout() failed, " \ "with code %d (%s)\n", \ (Y), (Z), (int)ec, curl_multi_strerror(ec)); \ res = TEST_ERR_BAD_TIMEOUT; \ } \ else if(*((B)) < -1L) { \ fprintf(stderr, "%s:%d curl_multi_timeout() succeeded, " \ "but returned invalid timeout value (%ld)\n", \ (Y), (Z), (long)*((B))); \ res = TEST_ERR_BAD_TIMEOUT; \ } \ } while(0) #define res_multi_timeout(A, B) \ exe_multi_timeout((A), (B), (__FILE__), (__LINE__)) #define chk_multi_timeout(A, B, Y, Z) do { \ exe_multi_timeout((A), (B), (Y), (Z)); \ if(res) \ goto test_cleanup; \ } while(0) #define multi_timeout(A, B) \ chk_multi_timeout((A), (B), (__FILE__), (__LINE__)) /* ---------------------------------------------------------------- */ #define exe_multi_poll(A,B,C,D,E,Y,Z) do { \ CURLMcode ec; \ if((ec = curl_multi_poll((A), (B), (C), (D), (E))) != CURLM_OK) { \ fprintf(stderr, "%s:%d curl_multi_poll() failed, " \ "with code %d (%s)\n", \ (Y), (Z), (int)ec, curl_multi_strerror(ec)); \ res = TEST_ERR_MULTI; \ } \ else if(*((E)) < 0) { \ fprintf(stderr, "%s:%d curl_multi_poll() succeeded, " \ "but returned invalid numfds value (%d)\n", \ (Y), (Z), (int)*((E))); \ res = TEST_ERR_NUM_HANDLES; \ } \ } while(0) #define res_multi_poll(A, B, C, D, E) \ exe_multi_poll((A), (B), (C), (D), (E), (__FILE__), (__LINE__)) #define chk_multi_poll(A, B, C, D, E, Y, Z) do { \ exe_multi_poll((A), (B), (C), (D), (E), (Y), (Z)); \ if(res) \ goto test_cleanup; \ } while(0) #define multi_poll(A, B, C, D, E) \ chk_multi_poll((A), (B), (C), (D), (E), (__FILE__), (__LINE__)) /* ---------------------------------------------------------------- */ #define exe_multi_wakeup(A,Y,Z) do { \ CURLMcode ec; \ if((ec = curl_multi_wakeup((A))) != CURLM_OK) { \ fprintf(stderr, "%s:%d curl_multi_wakeup() failed, " \ "with code %d (%s)\n", \ (Y), (Z), (int)ec, curl_multi_strerror(ec)); \ res = TEST_ERR_MULTI; \ } \ } while(0) #define res_multi_wakeup(A) \ exe_multi_wakeup((A), (__FILE__), (__LINE__)) #define chk_multi_wakeup(A, Y, Z) do { \ exe_multi_wakeup((A), (Y), (Z)); \ if(res) \ goto test_cleanup; \ } while(0) #define multi_wakeup(A) \ chk_multi_wakeup((A), (__FILE__), (__LINE__)) /* ---------------------------------------------------------------- */ #define exe_select_test(A, B, C, D, E, Y, Z) do { \ int ec; \ if(select_wrapper((A), (B), (C), (D), (E)) == -1) { \ ec = SOCKERRNO; \ fprintf(stderr, "%s:%d select() failed, with " \ "errno %d (%s)\n", \ (Y), (Z), ec, strerror(ec)); \ res = TEST_ERR_SELECT; \ } \ } while(0) #define res_select_test(A, B, C, D, E) \ exe_select_test((A), (B), (C), (D), (E), (__FILE__), (__LINE__)) #define chk_select_test(A, B, C, D, E, Y, Z) do { \ exe_select_test((A), (B), (C), (D), (E), (Y), (Z)); \ if(res) \ goto test_cleanup; \ } while(0) #define select_test(A, B, C, D, E) \ chk_select_test((A), (B), (C), (D), (E), (__FILE__), (__LINE__)) /* ---------------------------------------------------------------- */ #define start_test_timing() do { \ tv_test_start = tutil_tvnow(); \ } while(0) #define exe_test_timedout(Y,Z) do { \ long timediff = tutil_tvdiff(tutil_tvnow(), tv_test_start); \ if(timediff > (TEST_HANG_TIMEOUT)) { \ fprintf(stderr, "%s:%d ABORTING TEST, since it seems " \ "that it would have run forever (%ld ms > %ld ms)\n", \ (Y), (Z), timediff, (long) (TEST_HANG_TIMEOUT)); \ res = TEST_ERR_RUNS_FOREVER; \ } \ } while(0) #define res_test_timedout() \ exe_test_timedout((__FILE__), (__LINE__)) #define chk_test_timedout(Y, Z) do { \ exe_test_timedout(Y, Z); \ if(res) \ goto test_cleanup; \ } while(0) #define abort_on_test_timeout() \ chk_test_timedout((__FILE__), (__LINE__)) /* ---------------------------------------------------------------- */ #define exe_global_init(A,Y,Z) do { \ CURLcode ec; \ if((ec = curl_global_init((A))) != CURLE_OK) { \ fprintf(stderr, "%s:%d curl_global_init() failed, " \ "with code %d (%s)\n", \ (Y), (Z), (int)ec, curl_easy_strerror(ec)); \ res = ec; \ } \ } while(0) #define res_global_init(A) \ exe_global_init((A), (__FILE__), (__LINE__)) #define chk_global_init(A, Y, Z) do { \ exe_global_init((A), (Y), (Z)); \ if(res) \ return res; \ } while(0) /* global_init() is different than other macros. In case of failure it 'return's instead of going to 'test_cleanup'. */ #define global_init(A) \ chk_global_init((A), (__FILE__), (__LINE__)) #define NO_SUPPORT_BUILT_IN \ CURLcode test(char *URL) \ { \ (void)URL; \ fprintf(stderr, "Missing support\n"); \ return (CURLcode)1; \ } /* ---------------------------------------------------------------- */