curl/.azure-pipelines.yml

#***************************************************************************
#                                  _   _ ____  _
#  Project                     ___| | | |  _ \| |
#                             / __| | | | |_) | |
#                            | (__| |_| |  _ <| |___
#                             \___|\___/|_| \_\_____|
#
# Copyright (C) 1998 - 2021, Daniel Stenberg, <daniel@haxx.se>, et al.
#
# This software is licensed as described in the file COPYING, which
# you should have received as part of this distribution. The terms
# are also available at https://curl.se/docs/copyright.html.
#
# You may opt to use, copy, modify, merge, publish, distribute and/or sell
# copies of the Software, and permit persons to whom the Software is
# furnished to do so, under the terms of the COPYING file.
#
# This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
# KIND, either express or implied.
#
###########################################################################
# Starter pipeline
# Start with a minimal pipeline that you can customize to build and deploy your code.
# Add steps that build, run tests, deploy, and more:
# https://aka.ms/yaml

trigger:
  branches:
    include:
    - 'master'
    - '*/ci'

pr:
  branches:
    include:
    - 'master'

stages:

##########################################
### Linux jobs first
##########################################

- stage: linux
  dependsOn: []
  jobs:
  - job: ubuntu
    # define defaults to make sure variables are always expanded/replaced
    variables:
      install: ''
      configure: ''
      tests: '!433'
    timeoutInMinutes: 60
    pool:
      vmImage: 'ubuntu-latest'
    strategy:
      matrix:
        default:
          name: default
          install: jsonlint
          configure: --enable-debug --with-openssl
        disable_ipv6:
          name: w/o IPv6
          configure: --disable-ipv6 --with-openssl
        disable_http_smtp_imap:
          name: w/o HTTP/SMTP/IMAP
          configure: --disable-http --disable-smtp --disable-imap --without-openssl
        disable_thredres:
          name: sync resolver
          configure: --disable-threaded-resolver --with-openssl
        https_only:
          name: HTTPS only
          configure: --disable-dict --disable-file --disable-ftp --disable-gopher --disable-imap --disable-ldap --disable-pop3 --disable-rtmp --disable-rtsp --disable-scp --disable-sftp --disable-smb --disable-smtp --disable-telnet --disable-tftp --with-openssl
        torture:
          name: torture
          install: libnghttp2-dev
          configure: --enable-debug --disable-shared --disable-threaded-resolver --with-openssl
          tests: -n -t --shallow=40 !FTP
    steps:
    - script: sudo apt-get update && sudo apt-get install -y stunnel4 python3-impacket libzstd-dev libbrotli-dev $(install)
      displayName: 'apt install'

    - script: ./buildconf && ./configure --enable-warnings --enable-werror $(configure)
      displayName: 'configure $(name)'

    - script: make V=1 && cd tests && make V=1
      displayName: 'compile'
      env:
        MAKEFLAGS: "-j 2"

    - script: make test-nonflaky
      displayName: 'test'
      env:
        AZURE_ACCESS_TOKEN: "$(System.AccessToken)"
        TFLAGS: "-r $(tests)"

##########################################
### Windows jobs below
##########################################

- stage: windows
  dependsOn: []
  variables:
    agent.preferPowerShellOnContainers: true
  jobs:
  - job: windows
    # define defaults to make sure variables are always expanded/replaced
    variables:
      container_img: ''
      container_cmd: ''
      configure: ''
      tests: ''
    timeoutInMinutes: 120
    pool:
      vmImage: 'windows-2019'
    strategy:
      matrix:
        msys2_mingw32_debug_openssl:
          name: 32-bit OpenSSL/libssh2
          container_img: ghcr.io/mback2k/curl-docker-winbuildenv/msys2-mingw32:ltsc2019
          container_cmd: C:\msys64\usr\bin\sh
          prepare: pacman -S --needed --noconfirm --noprogressbar libssh2-devel mingw-w64-i686-libssh2
          configure: --host=i686-w64-mingw32 --build=i686-w64-mingw32 --prefix=/mingw32 --enable-debug --enable-werror --with-libssh2 --with-openssl
          tests: ~571 ~612 ~1056 ~1299 !SCP
        msys2_mingw64_debug_openssl:
          name: 64-bit OpenSSL/libssh2
          container_img: ghcr.io/mback2k/curl-docker-winbuildenv/msys2-mingw64:ltsc2019
          container_cmd: C:\msys64\usr\bin\sh
          prepare: pacman -S --needed --noconfirm --noprogressbar libssh2-devel mingw-w64-x86_64-libssh2
          configure: --host=x86_64-w64-mingw32 --build=x86_64-w64-mingw32 --prefix=/mingw64 --enable-debug --enable-werror --with-libssh2 --with-openssl
          tests: ~571 ~612 ~1056 ~1299 !SCP
        msys1_mingw_debug:
          name: 32-bit (legacy)
          container_img: ghcr.io/mback2k/curl-docker-winbuildenv/msys1-mingw:ltsc2019
          container_cmd: C:\MinGW\msys\1.0\bin\sh
          configure: --host=i686-pc-mingw32 --build=i686-pc-mingw32 --prefix=/mingw --enable-debug --without-ssl
          tests: ~203 ~1056 ~1143
        msys1_mingw32_debug:
          name: 32-bit w/o zlib
          container_img: ghcr.io/mback2k/curl-docker-winbuildenv/msys1-mingw32:ltsc2019
          container_cmd: C:\MinGW\msys\1.0\bin\sh
          configure: --host=i686-w64-mingw32 --build=i686-w64-mingw32 --prefix=/mingw32 --enable-debug --enable-werror --without-zlib --without-ssl
          tests: ~203 ~1056 ~1143 ~1299
        msys1_mingw64_debug:
          name: 64-bit w/o zlib
          container_img: ghcr.io/mback2k/curl-docker-winbuildenv/msys1-mingw64:ltsc2019
          container_cmd: C:\MinGW\msys\1.0\bin\sh
          configure: --host=x86_64-w64-mingw32 --build=x86_64-w64-mingw32 --prefix=/mingw64 --enable-debug --enable-werror --without-zlib --without-ssl
          tests: ~203 ~1056 ~1143 ~1299
        msys2_mingw32_debug_schannel:
          name: 32-bit Schannel/SSPI/WinIDN/libssh2
          container_img: ghcr.io/mback2k/curl-docker-winbuildenv/msys2-mingw32:ltsc2019
          container_cmd: C:\msys64\usr\bin\sh
          prepare: pacman -S --needed --noconfirm --noprogressbar libssh2-devel mingw-w64-i686-libssh2
          configure: --host=i686-w64-mingw32 --build=i686-w64-mingw32 --prefix=/mingw32 --enable-debug --enable-werror --enable-sspi --with-schannel --with-winidn --with-libssh2
          tests: ~165 ~310 ~571 ~612 ~1056 ~1299 ~1448 ~2034 ~2037 ~2041 ~2046 ~2047 ~3000 ~3001 !SCP
        msys2_mingw64_debug_schannel:
          name: 64-bit Schannel/SSPI/WinIDN/libssh2
          container_img: ghcr.io/mback2k/curl-docker-winbuildenv/msys2-mingw64:ltsc2019
          container_cmd: C:\msys64\usr\bin\sh
          prepare: pacman -S --needed --noconfirm --noprogressbar libssh2-devel mingw-w64-x86_64-libssh2
          configure: --host=x86_64-w64-mingw32 --build=x86_64-w64-mingw32 --prefix=/mingw64 --enable-debug --enable-werror --enable-sspi --with-schannel --with-winidn --with-libssh2
          tests: ~165 ~310 ~571 ~612 ~1056 ~1299 ~1448 ~2034 ~2037 ~2041 ~2046 ~2047 ~3000 ~3001 !SCP
        msys1_mingw_debug_schannel:
          name: 32-bit Schannel/SSPI/WinIDN (legacy)
          container_img: ghcr.io/mback2k/curl-docker-winbuildenv/msys1-mingw:ltsc2019
          container_cmd: C:\MinGW\msys\1.0\bin\sh
          configure: --host=i686-pc-mingw32 --build=i686-pc-mingw32 --prefix=/mingw --enable-debug --enable-sspi --with-schannel --with-winidn
          tests: ~203 ~305 ~310 ~311 ~312 ~313 ~404 ~1056 ~1143 ~2034 ~2035 ~2037 ~2038 ~2041 ~2042 ~2048 ~3000 ~3001
        msys1_mingw32_debug_schannel:
          name: 32-bit Schannel/SSPI/WinIDN w/o zlib
          container_img: ghcr.io/mback2k/curl-docker-winbuildenv/msys1-mingw32:ltsc2019
          container_cmd: C:\MinGW\msys\1.0\bin\sh
          configure: --host=i686-w64-mingw32 --build=i686-w64-mingw32 --prefix=/mingw32 --enable-debug --enable-werror --enable-sspi --with-schannel --with-winidn --without-zlib
          tests: ~203 ~310 ~1056 ~1143 ~1299 ~2034 ~2037 ~2041 ~3000 ~3001
        msys1_mingw64_debug_schannel:
          name: 64-bit Schannel/SSPI/WinIDN w/o zlib
          container_img: ghcr.io/mback2k/curl-docker-winbuildenv/msys1-mingw64:ltsc2019
          container_cmd: C:\MinGW\msys\1.0\bin\sh
          configure: --host=x86_64-w64-mingw32 --build=x86_64-w64-mingw32 --prefix=/mingw64  --enable-debug --enable-werror --enable-sspi --with-schannel --with-winidn --without-zlib
          tests: ~203 ~310 ~1056 ~1143 ~1299 ~2034 ~2037 ~2041 ~3000 ~3001
    container:
      image: $(container_img)
      env:
        MSYS2_PATH_TYPE: inherit
    steps:
    - script: $(container_cmd) -l -c "cd $(echo '%cd%') && $(prepare)"
      displayName: 'prepare'
      condition: variables.prepare

    - script: $(container_cmd) -l -c "cd $(echo '%cd%') && ./buildconf && ./configure $(configure)"
      displayName: 'configure $(name)'

    - script: $(container_cmd) -l -c "cd $(echo '%cd%') && make V=1 && cd tests && make V=1"
      displayName: 'compile'
      env:
        MAKEFLAGS: "-j 2"

    - script: $(container_cmd) -l -c "cd $(echo '%cd%') && make V=1 install && PATH=/usr/bin:/bin find . -type f -path '*/.libs/*.exe' -print -execdir mv -t .. {} \;"
      displayName: 'install'

    - script: $(container_cmd) -l -c "cd $(echo '%cd%') && make V=1 test-nonflaky"
      displayName: 'test'
      env:
        AZURE_ACCESS_TOKEN: "$(System.AccessToken)"
        TFLAGS: "-u -vc /usr/bin/curl.exe -r -rm $(tests)"