123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902903904905906907908909910911912913914915916917918919920921922923924925926927928929930931932933934935936937938939940941942943944945946947948949950951952953954955956957958959960961962963964965966967968969970971972973974975976977978979980981982983984985986987988989990991992993994995996997998999100010011002100310041005100610071008100910101011101210131014101510161017101810191020102110221023102410251026102710281029103010311032103310341035103610371038103910401041104210431044104510461047104810491050105110521053105410551056105710581059106010611062106310641065106610671068106910701071107210731074107510761077107810791080108110821083108410851086108710881089109010911092109310941095109610971098109911001101110211031104110511061107110811091110111111121113111411151116111711181119112011211122112311241125112611271128112911301131113211331134113511361137113811391140114111421143114411451146114711481149115011511152115311541155115611571158115911601161116211631164116511661167116811691170117111721173117411751176117711781179118011811182118311841185118611871188118911901191119211931194119511961197119811991200120112021203120412051206120712081209121012111212121312141215121612171218121912201221122212231224122512261227122812291230123112321233123412351236123712381239124012411242124312441245124612471248124912501251125212531254125512561257125812591260126112621263126412651266126712681269127012711272127312741275127612771278127912801281128212831284128512861287128812891290129112921293129412951296129712981299130013011302130313041305130613071308130913101311131213131314131513161317131813191320132113221323132413251326132713281329133013311332133313341335133613371338133913401341134213431344134513461347134813491350135113521353135413551356135713581359136013611362136313641365136613671368136913701371137213731374137513761377137813791380138113821383138413851386138713881389139013911392139313941395139613971398139914001401140214031404140514061407140814091410141114121413141414151416141714181419142014211422142314241425142614271428142914301431143214331434143514361437143814391440144114421443144414451446144714481449145014511452145314541455145614571458145914601461146214631464146514661467146814691470147114721473147414751476147714781479148014811482148314841485148614871488148914901491149214931494149514961497149814991500150115021503150415051506150715081509151015111512151315141515151615171518151915201521152215231524152515261527152815291530153115321533153415351536153715381539154015411542154315441545154615471548154915501551155215531554155515561557155815591560156115621563156415651566156715681569157015711572157315741575157615771578157915801581158215831584158515861587158815891590159115921593159415951596159715981599160016011602160316041605160616071608160916101611161216131614161516161617161816191620162116221623162416251626162716281629163016311632163316341635163616371638163916401641164216431644164516461647164816491650165116521653165416551656165716581659166016611662166316641665166616671668166916701671167216731674167516761677167816791680168116821683168416851686168716881689169016911692169316941695169616971698169917001701170217031704170517061707170817091710171117121713171417151716171717181719172017211722172317241725172617271728172917301731173217331734173517361737173817391740174117421743174417451746174717481749175017511752175317541755175617571758175917601761176217631764176517661767176817691770177117721773177417751776177717781779178017811782178317841785178617871788178917901791179217931794179517961797179817991800180118021803180418051806180718081809181018111812181318141815181618171818181918201821182218231824182518261827182818291830183118321833183418351836183718381839184018411842184318441845184618471848184918501851185218531854185518561857185818591860186118621863186418651866186718681869187018711872187318741875187618771878187918801881188218831884188518861887188818891890189118921893189418951896189718981899190019011902190319041905190619071908190919101911191219131914191519161917191819191920192119221923192419251926192719281929193019311932193319341935193619371938193919401941194219431944194519461947194819491950195119521953195419551956195719581959196019611962196319641965196619671968196919701971197219731974197519761977197819791980198119821983198419851986198719881989199019911992199319941995199619971998199920002001200220032004200520062007200820092010201120122013201420152016201720182019202020212022202320242025202620272028202920302031203220332034203520362037203820392040204120422043204420452046204720482049205020512052205320542055205620572058205920602061206220632064206520662067206820692070207120722073207420752076207720782079208020812082208320842085208620872088208920902091209220932094209520962097209820992100210121022103210421052106210721082109211021112112211321142115211621172118211921202121212221232124212521262127212821292130213121322133213421352136213721382139214021412142214321442145214621472148214921502151215221532154215521562157215821592160216121622163216421652166216721682169217021712172217321742175217621772178217921802181218221832184218521862187218821892190219121922193219421952196219721982199220022012202220322042205220622072208220922102211221222132214221522162217221822192220222122222223222422252226222722282229223022312232223322342235223622372238223922402241224222432244224522462247224822492250225122522253225422552256225722582259226022612262226322642265226622672268226922702271227222732274227522762277227822792280228122822283228422852286228722882289229022912292229322942295229622972298229923002301230223032304230523062307230823092310231123122313231423152316231723182319232023212322232323242325232623272328232923302331233223332334233523362337233823392340234123422343234423452346234723482349235023512352235323542355235623572358235923602361236223632364236523662367236823692370237123722373237423752376237723782379238023812382238323842385238623872388238923902391239223932394239523962397239823992400240124022403240424052406240724082409241024112412241324142415241624172418241924202421242224232424242524262427242824292430243124322433243424352436243724382439244024412442244324442445244624472448244924502451245224532454245524562457245824592460246124622463246424652466246724682469247024712472247324742475247624772478247924802481248224832484248524862487248824892490249124922493249424952496249724982499250025012502250325042505250625072508250925102511251225132514251525162517251825192520252125222523252425252526252725282529253025312532253325342535253625372538253925402541254225432544254525462547254825492550255125522553255425552556255725582559256025612562256325642565256625672568256925702571257225732574257525762577257825792580258125822583258425852586258725882589259025912592259325942595259625972598259926002601260226032604260526062607260826092610261126122613261426152616261726182619262026212622262326242625262626272628262926302631263226332634263526362637263826392640264126422643264426452646264726482649265026512652265326542655265626572658265926602661266226632664266526662667266826692670267126722673267426752676267726782679268026812682268326842685268626872688268926902691269226932694269526962697269826992700270127022703270427052706270727082709271027112712271327142715271627172718271927202721272227232724272527262727272827292730273127322733273427352736273727382739274027412742274327442745274627472748274927502751275227532754275527562757275827592760276127622763276427652766276727682769277027712772277327742775277627772778277927802781278227832784278527862787278827892790279127922793279427952796279727982799280028012802280328042805280628072808280928102811281228132814281528162817281828192820282128222823282428252826282728282829283028312832283328342835283628372838283928402841284228432844284528462847284828492850285128522853285428552856285728582859286028612862286328642865286628672868286928702871287228732874287528762877287828792880288128822883288428852886288728882889289028912892289328942895289628972898289929002901290229032904290529062907290829092910291129122913291429152916291729182919292029212922292329242925292629272928292929302931293229332934293529362937293829392940294129422943294429452946294729482949295029512952295329542955295629572958295929602961296229632964296529662967296829692970297129722973297429752976297729782979298029812982298329842985298629872988298929902991299229932994299529962997299829993000300130023003300430053006300730083009301030113012301330143015301630173018301930203021302230233024302530263027302830293030303130323033303430353036303730383039304030413042304330443045304630473048304930503051305230533054305530563057305830593060306130623063306430653066306730683069307030713072307330743075307630773078307930803081308230833084308530863087308830893090309130923093309430953096309730983099310031013102310331043105310631073108310931103111311231133114311531163117311831193120312131223123312431253126312731283129313031313132313331343135313631373138313931403141314231433144314531463147314831493150315131523153315431553156 |
- package servers;
- use IO::Socket;
- use strict;
- use warnings;
- BEGIN {
- use base qw(Exporter);
- our @EXPORT = (
-
- qw(
- $SOCKSIN
- $err_unexpected
- $debugprotocol
- $stunnel
- ),
-
- qw(
- initserverconfig
- )
- );
- our @EXPORT_OK = (
-
- qw(
- checkcmd
- clearlocks
- serverfortest
- stopserver
- stopservers
- subvariables
- localhttp
- ),
-
- qw(
- protoport
- )
- );
- }
- use serverhelp qw(
- serverfactors
- servername_id
- servername_str
- servername_canon
- server_pidfilename
- server_portfilename
- server_logfilename
- );
- use sshhelp qw(
- $hstpubmd5f
- $hstpubsha256f
- $sshexe
- $sftpexe
- $sftpconfig
- $sshdlog
- $sftplog
- $sftpcmds
- display_sshdconfig
- display_sftpconfig
- display_sshdlog
- display_sftplog
- find_sshd
- find_ssh
- find_sftp
- find_httptlssrv
- sshversioninfo
- );
- use pathhelp qw(
- exe_ext
- os_is_win
- build_sys_abs_path
- sys_native_abs_path
- );
- use processhelp;
- use globalconfig;
- use testutil qw(
- logmsg
- runclient
- runclientoutput
- );
- my %serverpidfile;
- my %serverportfile;
- my $sshdvernum;
- my $sshdverstr;
- my $sshderror;
- my %doesntrun;
- my %PORT = (nolisten => 47);
- my $server_response_maxtime=13;
- my $httptlssrv = find_httptlssrv();
- my %run;
- my %runcert;
- my $CLIENTIP="127.0.0.1";
- my $CLIENT6IP="[::1]";
- my $posix_pwd = build_sys_abs_path($pwd);
- my $h2cver = "h2c";
- my $portrange = 999;
-
-
- my $HOSTIP="127.0.0.1";
- my $HOST6IP="[::1]";
- my $HTTPUNIXPATH;
- my $SOCKSUNIXPATH;
- my $SSHSRVMD5 = "[uninitialized]";
- my $SSHSRVSHA256 = "[uninitialized]";
- my $USER;
- my $sshdid;
- my $ftpchecktime=1;
- our $SOCKSIN="socksd-request.log";
- our $err_unexpected;
- our $debugprotocol;
- our $stunnel;
- sub checkcmd {
- my ($cmd, @extrapaths)=@_;
- my @paths;
- if ($^O eq 'MSWin32' || $^O eq 'dos' || $^O eq 'os2') {
-
- @paths=(split(';', $ENV{'PATH'}), @extrapaths);
- }
- else {
- @paths=(split(':', $ENV{'PATH'}), "/usr/sbin", "/usr/local/sbin",
- "/sbin", "/usr/bin", "/usr/local/bin", @extrapaths);
- }
- for(@paths) {
- if( -x "$_/$cmd" . exe_ext('SYS') && ! -d "$_/$cmd" . exe_ext('SYS')) {
-
- return "$_/$cmd";
- }
- }
- return "";
- }
- sub getfreeport {
- my ($ipnum) = @_;
- my $server = IO::Socket->new(LocalPort => 0,
- Domain => $ipnum == 6 ? AF_INET6 : AF_INET,
- Type => SOCK_STREAM,
- Reuse => 1,
- Listen => 10 )
- or die "Couldn't create tcp server socket: $@\n";
- return $server->sockport();
- }
- use File::Temp qw/ tempfile/;
- sub initserverconfig {
- my ($fh, $socks) = tempfile("curl-socksd-XXXXXXXX", TMPDIR => 1);
- close($fh);
- unlink($socks);
- my ($f2, $http) = tempfile("curl-http-XXXXXXXX", TMPDIR => 1);
- close($f2);
- unlink($http);
- $SOCKSUNIXPATH = $socks;
- $HTTPUNIXPATH = $http;
- $stunnel = checkcmd("stunnel4") || checkcmd("tstunnel") || checkcmd("stunnel");
-
- $USER = $ENV{USER};
- if (!$USER) {
- $USER = $ENV{USERNAME};
- if (!$USER) {
- $USER = $ENV{LOGNAME};
- }
- }
- init_serverpidfile_hash();
- }
- sub init_serverpidfile_hash {
- for my $proto (('ftp', 'gopher', 'http', 'imap', 'pop3', 'smtp', 'http/2', 'http/3')) {
- for my $ssl (('', 's')) {
- for my $ipvnum ((4, 6)) {
- for my $idnum ((1, 2, 3)) {
- my $serv = servername_id("$proto$ssl", $ipvnum, $idnum);
- my $pidf = server_pidfilename("$LOGDIR/$PIDDIR", "$proto$ssl",
- $ipvnum, $idnum);
- $serverpidfile{$serv} = $pidf;
- my $portf = server_portfilename("$LOGDIR/$PIDDIR", "$proto$ssl",
- $ipvnum, $idnum);
- $serverportfile{$serv} = $portf;
- }
- }
- }
- }
- for my $proto (('tftp', 'sftp', 'socks', 'ssh', 'rtsp', 'httptls',
- 'dict', 'smb', 'smbs', 'telnet', 'mqtt')) {
- for my $ipvnum ((4, 6)) {
- for my $idnum ((1, 2)) {
- my $serv = servername_id($proto, $ipvnum, $idnum);
- my $pidf = server_pidfilename("$LOGDIR/$PIDDIR", $proto, $ipvnum,
- $idnum);
- $serverpidfile{$serv} = $pidf;
- my $portf = server_portfilename("$LOGDIR/$PIDDIR", $proto, $ipvnum,
- $idnum);
- $serverportfile{$serv} = $portf;
- }
- }
- }
- for my $proto (('http', 'imap', 'pop3', 'smtp', 'http/2', 'http/3')) {
- for my $ssl (('', 's')) {
- my $serv = servername_id("$proto$ssl", "unix", 1);
- my $pidf = server_pidfilename("$LOGDIR/$PIDDIR", "$proto$ssl",
- "unix", 1);
- $serverpidfile{$serv} = $pidf;
- my $portf = server_portfilename("$LOGDIR/$PIDDIR", "$proto$ssl",
- "unix", 1);
- $serverportfile{$serv} = $portf;
- }
- }
- }
- sub clearlocks {
- my $dir = $_[0];
- my $done = 0;
- if(os_is_win()) {
- $dir = sys_native_abs_path($dir);
-
- if ($^O eq 'MSWin32') {
- $dir =~ s/\//\\/g;
- }
- else {
- $dir =~ s/\//\\\\/g;
- }
- my $handle = "handle";
- if($ENV{"PROCESSOR_ARCHITECTURE"} =~ /64$/) {
- $handle = "handle64";
- }
- if(checkcmd($handle)) {
-
- my $cmd = "$handle $dir -accepteula -nobanner";
- logmsg "clearlocks: Executing query: '$cmd'\n";
- my @handles = `$cmd`;
- for my $tryhandle (@handles) {
-
- if($tryhandle =~ /^(\S+)\s+pid:\s+(\d+)\s+type:\s+(\w+)\s+([0-9A-F]+):\s+(.+)\r\r/) {
- logmsg "clearlocks: Found $3 lock of '$5' ($4) by $1 ($2)\n";
-
- if("$3" eq "File" && "$1" ne "tstunnel.exe") {
- logmsg "clearlocks: Killing IMAGENAME eq $1 and PID eq $2\n";
-
- my $cmd = "taskkill.exe -f -t -fi \"IMAGENAME eq $1\" -fi \"PID eq $2\" >nul 2>&1";
- logmsg "clearlocks: Executing kill: '$cmd'\n";
- system($cmd);
- $done = 1;
- }
- }
- }
- }
- else {
- logmsg "Warning: 'handle' tool not found.\n";
- }
- }
- return $done;
- }
- sub checkdied {
- my $pid = $_[0];
- if((not defined $pid) || $pid <= 0) {
- return 0;
- }
- use POSIX ":sys_wait_h";
- my $rc = pidwait($pid, &WNOHANG);
- return ($rc == $pid)?1:0;
- }
- sub serverfortest {
- my (@what)=@_;
- for(my $i = scalar(@what) - 1; $i >= 0; $i--) {
- my $srvrline = $what[$i];
- chomp $srvrline if($srvrline);
- if($srvrline =~ /^(\S+)((\s*)(.*))/) {
- my $server = "${1}";
- my $lnrest = "${2}";
- my $tlsext;
- if($server =~ /^(httptls)(\+)(ext|srp)(\d*)(-ipv6|)$/) {
- $server = "${1}${4}${5}";
- $tlsext = uc("TLS-${3}");
- }
- if(! grep /^\Q$server\E$/, @protocols) {
- if(substr($server,0,5) ne "socks") {
- if($tlsext) {
- return ("curl lacks $tlsext support", 4);
- }
- else {
- return ("curl lacks $server server support", 4);
- }
- }
- }
- $what[$i] = "$server$lnrest" if($tlsext);
- }
- }
- return &startservers(@what);
- }
- sub startnew {
- my ($cmd, $pidfile, $timeout, $fakepidfile)=@_;
- logmsg "startnew: $cmd\n" if ($verbose);
- my $child = fork();
- if(not defined $child) {
- logmsg "startnew: fork() failure detected\n";
- return (-1,-1);
- }
- if(0 == $child) {
-
-
- $| = 1;
-
-
- exec("exec $cmd") || die "Can't exec() $cmd: $!";
-
-
- die "error: exec() has returned";
- }
-
- if ($fakepidfile) {
- if(open(my $out, ">", "$pidfile")) {
- print $out $child . "\n";
- close($out) || die "Failure writing pidfile";
- logmsg "startnew: $pidfile faked with pid=$child\n" if($verbose);
- }
- else {
- logmsg "startnew: failed to write fake $pidfile with pid=$child\n";
- }
-
- portable_sleep($timeout);
- if (checkdied($child)) {
- logmsg "startnew: child process has failed to start\n" if($verbose);
- return (-1,-1);
- }
- }
- my $pid2 = 0;
- my $count = $timeout;
- while($count--) {
- $pid2 = pidfromfile($pidfile);
- if(($pid2 > 0) && pidexists($pid2)) {
-
-
-
- last;
- }
- if (checkdied($child)) {
- logmsg "startnew: child process has died, server might start up\n"
- if($verbose);
-
-
-
-
-
- $count >>= 2;
- }
- sleep(1);
- }
-
-
-
- return ($child, $pid2);
- }
- sub protoport {
- my ($proto) = @_;
- return $PORT{$proto} || "[not running]";
- }
- sub stopserver {
- my ($server, $pidlist) = @_;
- my $ipvnum = 4;
-
-
-
- if($server =~ /^(ftp|imap|pop3|smtp)s?(\d*)(-ipv6|)$/) {
- my $proto = $1;
- my $idnum = ($2 && ($2 > 1)) ? $2 : 1;
- $ipvnum = ($3 && ($3 =~ /6$/)) ? 6 : 4;
- killsockfilters("$LOGDIR/$PIDDIR", $proto, $ipvnum, $idnum, $verbose);
- }
-
-
-
- my @killservers;
- if($server =~ /^(ftp|http|imap|pop3|smtp)s((\d*)(-ipv6|-unix|))$/) {
-
- push @killservers, "${1}${2}";
- }
- elsif($server =~ /^(ftp|http|imap|pop3|smtp)((\d*)(-ipv6|-unix|))$/) {
-
- push @killservers, "${1}s${2}";
- }
- elsif($server =~ /^(socks)((\d*)(-ipv6|))$/) {
-
- push @killservers, "ssh${2}";
- }
- elsif($server =~ /^(ssh)((\d*)(-ipv6|))$/) {
-
- push @killservers, "socks${2}";
- }
- if($server eq "http" or $server eq "https") {
-
-
-
- push @killservers, "http/2";
- push @killservers, "http/3";
- }
- push @killservers, $server;
-
-
-
- foreach my $server (@killservers) {
- if($run{$server}) {
-
- $pidlist .= " $run{$server}";
- $run{$server} = 0;
- }
- $runcert{$server} = 0 if($runcert{$server});
- }
- killpid($verbose, $pidlist);
-
-
-
- my $result = 0;
- foreach my $server (@killservers) {
- my $pidfile = $serverpidfile{$server};
- unlink($pidfile) if(-f $pidfile);
- }
-
-
-
- foreach my $server (@killservers) {
-
- my @lockfiles = (
- "$LOGDIR/$LOCKDIR/$server.lock",
- "$LOGDIR/$LOCKDIR/$server-IPv$ipvnum.lock",
- "$LOGDIR/$LOCKDIR/sws-".uc($server)."-IPv$ipvnum.lock"
- );
- foreach my $lockfile (@lockfiles) {
- if(-f $lockfile) {
- unlink($lockfile);
- logmsg "RUN: kill $server, cleaned up $lockfile\n" if ($verbose);
- }
- }
- }
- return $result;
- }
- sub getexternalproxyflags {
- return " --proxy $proxy_address ";
- }
- sub verifyhttp {
- my ($proto, $ipvnum, $idnum, $ip, $port_or_path, $do_http3) = @_;
- my $server = servername_id($proto, $ipvnum, $idnum);
- my $bonus="";
-
- my $port = ($ipvnum eq "unix") ? 80 : $port_or_path;
- my $infix = ($do_http3) ? "_h3" : "";
- my $verifyout = "$LOGDIR/".
- servername_canon($proto, $ipvnum, $idnum) .$infix .'_verify.out';
- unlink($verifyout) if(-f $verifyout);
- my $verifylog = "$LOGDIR/".
- servername_canon($proto, $ipvnum, $idnum) .$infix .'_verify.log';
- unlink($verifylog) if(-f $verifylog);
- if($proto eq "gopher") {
-
- $bonus="1/";
- }
- my $flags = "--max-time $server_response_maxtime ";
- $flags .= "--output $verifyout ";
- $flags .= "--silent ";
- $flags .= "--verbose ";
- $flags .= "--globoff ";
- $flags .= "--unix-socket '$port_or_path' " if $ipvnum eq "unix";
- $flags .= "--insecure " if($proto eq 'https');
- if($proxy_address) {
- $flags .= getexternalproxyflags();
- }
- $flags .= "--http3-only " if($do_http3);
- $flags .= "\"$proto://$ip:$port/${bonus}verifiedserver\"";
- my $cmd = "$VCURL $flags 2>$verifylog";
-
- logmsg "RUN: $cmd\n" if($verbose);
- my $res = runclient($cmd);
- $res >>= 8;
- if($res & 128) {
- logmsg "RUN: curl command died with a coredump\n";
- return -1;
- }
- if($res && $verbose) {
- logmsg "RUN: curl command returned $res\n";
- if(open(my $file, "<", "$verifylog")) {
- while(my $string = <$file>) {
- logmsg "RUN: $string" if($string !~ /^([ \t]*)$/);
- }
- close($file);
- }
- }
- my $data;
- if(open(my $file, "<", "$verifyout")) {
- while(my $string = <$file>) {
- $data = $string;
- last;
- }
- close($file);
- }
- my $pid = 0;
- if($data && ($data =~ /WE ROOLZ: (\d+)/)) {
- $pid = 0+$1;
- }
- elsif($res == 6) {
-
- logmsg "RUN: failed to resolve host ($proto://$ip:$port/verifiedserver)\n";
- return -1;
- }
- elsif($data || ($res && ($res != 7))) {
- logmsg "RUN: Unknown server on our $server port: $port ($res)\n";
- return -1;
- }
- return $pid;
- }
- sub verifyftp {
- my ($proto, $ipvnum, $idnum, $ip, $port) = @_;
- my $server = servername_id($proto, $ipvnum, $idnum);
- my $time=time();
- my $extra="";
- my $verifylog = "$LOGDIR/".
- servername_canon($proto, $ipvnum, $idnum) .'_verify.log';
- unlink($verifylog) if(-f $verifylog);
- if($proto eq "ftps") {
- $extra .= "--insecure --ftp-ssl-control ";
- }
- my $flags = "--max-time $server_response_maxtime ";
- $flags .= "--silent ";
- $flags .= "--verbose ";
- $flags .= "--globoff ";
- $flags .= $extra;
- if($proxy_address) {
- $flags .= getexternalproxyflags();
- }
- $flags .= "\"$proto://$ip:$port/verifiedserver\"";
- my $cmd = "$VCURL $flags 2>$verifylog";
-
- logmsg "RUN: $cmd\n" if($verbose);
- my @data = runclientoutput($cmd);
- my $res = $? >> 8;
- if($res & 128) {
- logmsg "RUN: curl command died with a coredump\n";
- return -1;
- }
- my $pid = 0;
- foreach my $line (@data) {
- if($line =~ /WE ROOLZ: (\d+)/) {
-
- $pid = 0+$1;
- last;
- }
- }
- if($pid <= 0 && @data && $data[0]) {
-
- logmsg "RUN: Unknown server on our $server port: $port\n";
- return 0;
- }
-
-
- my $took = int(0.5+time()-$time);
- if($verbose) {
- logmsg "RUN: Verifying our test $server server took $took seconds\n";
- }
- $ftpchecktime = $took>=1?$took:1;
- return $pid;
- }
- sub verifyrtsp {
- my ($proto, $ipvnum, $idnum, $ip, $port) = @_;
- my $server = servername_id($proto, $ipvnum, $idnum);
- my $verifyout = "$LOGDIR/".
- servername_canon($proto, $ipvnum, $idnum) .'_verify.out';
- unlink($verifyout) if(-f $verifyout);
- my $verifylog = "$LOGDIR/".
- servername_canon($proto, $ipvnum, $idnum) .'_verify.log';
- unlink($verifylog) if(-f $verifylog);
- my $flags = "--max-time $server_response_maxtime ";
- $flags .= "--output $verifyout ";
- $flags .= "--silent ";
- $flags .= "--verbose ";
- $flags .= "--globoff ";
- if($proxy_address) {
- $flags .= getexternalproxyflags();
- }
-
- $flags .= "\"http://$ip:$port/verifiedserver\"";
- my $cmd = "$VCURL $flags 2>$verifylog";
-
- logmsg "RUN: $cmd\n" if($verbose);
- my $res = runclient($cmd);
- $res >>= 8;
- if($res & 128) {
- logmsg "RUN: curl command died with a coredump\n";
- return -1;
- }
- if($res && $verbose) {
- logmsg "RUN: curl command returned $res\n";
- if(open(my $file, "<", "$verifylog")) {
- while(my $string = <$file>) {
- logmsg "RUN: $string" if($string !~ /^[ \t]*$/);
- }
- close($file);
- }
- }
- my $data;
- if(open(my $file, "<", "$verifyout")) {
- while(my $string = <$file>) {
- $data = $string;
- last;
- }
- close($file);
- }
- my $pid = 0;
- if($data && ($data =~ /RTSP_SERVER WE ROOLZ: (\d+)/)) {
- $pid = 0+$1;
- }
- elsif($res == 6) {
-
- logmsg "RUN: failed to resolve host ($proto://$ip:$port/verifiedserver)\n";
- return -1;
- }
- elsif($data || ($res != 7)) {
- logmsg "RUN: Unknown server on our $server port: $port\n";
- return -1;
- }
- return $pid;
- }
- sub verifyssh {
- my ($proto, $ipvnum, $idnum, $ip, $port) = @_;
- my $pidfile = server_pidfilename("$LOGDIR/$PIDDIR", $proto, $ipvnum,
- $idnum);
- my $pid = processexists($pidfile);
- if($pid < 0) {
- logmsg "RUN: SSH server has died after starting up\n";
- }
- return $pid;
- }
- sub verifysftp {
- my ($proto, $ipvnum, $idnum, $ip, $port) = @_;
- my $server = servername_id($proto, $ipvnum, $idnum);
- my $verified = 0;
-
- my $sftp = find_sftp();
- if(!$sftp) {
- logmsg "RUN: SFTP server cannot find $sftpexe\n";
- return -1;
- }
-
- my $ssh = find_ssh();
- if(!$ssh) {
- logmsg "RUN: SFTP server cannot find $sshexe\n";
- return -1;
- }
-
-
- my $cmd = "\"$sftp\" -b $LOGDIR/$PIDDIR/$sftpcmds -F $LOGDIR/$PIDDIR/$sftpconfig -S \"$ssh\" $ip > $sftplog 2>&1";
- my $res = runclient($cmd);
-
- if(open(my $sftplogfile, "<", "$sftplog")) {
- while(<$sftplogfile>) {
- if(/^Remote working directory: /) {
- $verified = 1;
- last;
- }
- }
- close($sftplogfile);
- }
- return $verified;
- }
- sub verifyhttptls {
- my ($proto, $ipvnum, $idnum, $ip, $port) = @_;
- my $server = servername_id($proto, $ipvnum, $idnum);
- my $pidfile = server_pidfilename("$LOGDIR/$PIDDIR", $proto, $ipvnum,
- $idnum);
- my $verifyout = "$LOGDIR/".
- servername_canon($proto, $ipvnum, $idnum) .'_verify.out';
- unlink($verifyout) if(-f $verifyout);
- my $verifylog = "$LOGDIR/".
- servername_canon($proto, $ipvnum, $idnum) .'_verify.log';
- unlink($verifylog) if(-f $verifylog);
- my $flags = "--max-time $server_response_maxtime ";
- $flags .= "--output $verifyout ";
- $flags .= "--verbose ";
- $flags .= "--globoff ";
- $flags .= "--insecure ";
- $flags .= "--tlsauthtype SRP ";
- $flags .= "--tlsuser jsmith ";
- $flags .= "--tlspassword abc ";
- if($proxy_address) {
- $flags .= getexternalproxyflags();
- }
- $flags .= "\"https://$ip:$port/verifiedserver\"";
- my $cmd = "$VCURL $flags 2>$verifylog";
-
- logmsg "RUN: $cmd\n" if($verbose);
- my $res = runclient($cmd);
- $res >>= 8;
- if($res & 128) {
- logmsg "RUN: curl command died with a coredump\n";
- return -1;
- }
- if($res && $verbose) {
- logmsg "RUN: curl command returned $res\n";
- if(open(my $file, "<", "$verifylog")) {
- while(my $string = <$file>) {
- logmsg "RUN: $string" if($string !~ /^([ \t]*)$/);
- }
- close($file);
- }
- }
- my $data;
- if(open(my $file, "<", "$verifyout")) {
- while(my $string = <$file>) {
- $data .= $string;
- }
- close($file);
- }
- my $pid = 0;
- if($data && ($data =~ /(GNUTLS|GnuTLS)/) && ($pid = processexists($pidfile))) {
- if($pid < 0) {
- logmsg "RUN: $server server has died after starting up\n";
- }
- return $pid;
- }
- elsif($res == 6) {
-
- logmsg "RUN: failed to resolve host (https://$ip:$port/verifiedserver)\n";
- return -1;
- }
- elsif($data || ($res && ($res != 7))) {
- logmsg "RUN: Unknown server on our $server port: $port ($res)\n";
- return -1;
- }
- return $pid;
- }
- sub verifymqtt {
- my ($proto, $ipvnum, $idnum, $ip, $port) = @_;
- my $pidfile = server_pidfilename("$LOGDIR/$PIDDIR", $proto, $ipvnum,
- $idnum);
- my $pid = processexists($pidfile);
- if($pid < 0) {
- logmsg "RUN: MQTT server has died after starting up\n";
- }
- return $pid;
- }
- sub verifysocks {
- my ($proto, $ipvnum, $idnum, $ip, $port) = @_;
- my $pidfile = server_pidfilename("$LOGDIR/$PIDDIR", $proto, $ipvnum,
- $idnum);
- my $pid = processexists($pidfile);
- if($pid < 0) {
- logmsg "RUN: SOCKS server has died after starting up\n";
- }
- return $pid;
- }
- sub verifysmb {
- my ($proto, $ipvnum, $idnum, $ip, $port) = @_;
- my $server = servername_id($proto, $ipvnum, $idnum);
- my $time=time();
- my $extra="";
- my $verifylog = "$LOGDIR/".
- servername_canon($proto, $ipvnum, $idnum) .'_verify.log';
- unlink($verifylog) if(-f $verifylog);
- my $flags = "--max-time $server_response_maxtime ";
- $flags .= "--silent ";
- $flags .= "--verbose ";
- $flags .= "--globoff ";
- $flags .= "-u 'curltest:curltest' ";
- $flags .= $extra;
- $flags .= "\"$proto://$ip:$port/SERVER/verifiedserver\"";
- my $cmd = "$VCURL $flags 2>$verifylog";
-
- logmsg "RUN: $cmd\n" if($verbose);
- my @data = runclientoutput($cmd);
- my $res = $? >> 8;
- if($res & 128) {
- logmsg "RUN: curl command died with a coredump\n";
- return -1;
- }
- my $pid = 0;
- foreach my $line (@data) {
- if($line =~ /WE ROOLZ: (\d+)/) {
-
- $pid = 0+$1;
- last;
- }
- }
- if($pid <= 0 && @data && $data[0]) {
-
- logmsg "RUN: Unknown server on our $server port: $port\n";
- return 0;
- }
-
-
- my $took = int(0.5+time()-$time);
- if($verbose) {
- logmsg "RUN: Verifying our test $server server took $took seconds\n";
- }
- return $pid;
- }
- sub verifytelnet {
- my ($proto, $ipvnum, $idnum, $ip, $port) = @_;
- my $server = servername_id($proto, $ipvnum, $idnum);
- my $time=time();
- my $extra="";
- my $verifylog = "$LOGDIR/".
- servername_canon($proto, $ipvnum, $idnum) .'_verify.log';
- unlink($verifylog) if(-f $verifylog);
- my $flags = "--max-time $server_response_maxtime ";
- $flags .= "--silent ";
- $flags .= "--verbose ";
- $flags .= "--globoff ";
- $flags .= "--upload-file - ";
- $flags .= $extra;
- $flags .= "\"$proto://$ip:$port\"";
- my $cmd = "echo 'verifiedserver' | $VCURL $flags 2>$verifylog";
-
- logmsg "RUN: $cmd\n" if($verbose);
- my @data = runclientoutput($cmd);
- my $res = $? >> 8;
- if($res & 128) {
- logmsg "RUN: curl command died with a coredump\n";
- return -1;
- }
- my $pid = 0;
- foreach my $line (@data) {
- if($line =~ /WE ROOLZ: (\d+)/) {
-
- $pid = 0+$1;
- last;
- }
- }
- if($pid <= 0 && @data && $data[0]) {
-
- logmsg "RUN: Unknown server on our $server port: $port\n";
- return 0;
- }
-
-
- my $took = int(0.5+time()-$time);
- if($verbose) {
- logmsg "RUN: Verifying our test $server server took $took seconds\n";
- }
- return $pid;
- }
- my %protofunc = ('http' => \&verifyhttp,
- 'https' => \&verifyhttp,
- 'rtsp' => \&verifyrtsp,
- 'ftp' => \&verifyftp,
- 'pop3' => \&verifyftp,
- 'imap' => \&verifyftp,
- 'smtp' => \&verifyftp,
- 'ftps' => \&verifyftp,
- 'pop3s' => \&verifyftp,
- 'imaps' => \&verifyftp,
- 'mqtt' => \&verifymqtt,
- 'smtps' => \&verifyftp,
- 'tftp' => \&verifyftp,
- 'ssh' => \&verifyssh,
- 'socks' => \&verifysocks,
- 'socks5unix' => \&verifysocks,
- 'gopher' => \&verifyhttp,
- 'httptls' => \&verifyhttptls,
- 'dict' => \&verifyftp,
- 'smb' => \&verifysmb,
- 'telnet' => \&verifytelnet);
- sub verifyserver {
- my ($proto, $ipvnum, $idnum, $ip, $port) = @_;
- my $count = 30;
- my $pid;
- while($count--) {
- my $fun = $protofunc{$proto};
- $pid = &$fun($proto, $ipvnum, $idnum, $ip, $port);
- if($pid > 0) {
- last;
- }
- elsif($pid < 0) {
-
- return 0;
- }
- sleep(1);
- }
- return $pid;
- }
- sub responsiveserver {
- my ($proto, $ipvnum, $idnum, $ip, $port, $do_http3) = @_;
- my $prev_verbose = $verbose;
- $verbose = 0;
- my $fun = $protofunc{$proto};
- my $pid = &$fun($proto, $ipvnum, $idnum, $ip, $port, $do_http3);
- $verbose = $prev_verbose;
- if($pid > 0) {
- return 1;
- }
- my $srvrname = servername_str($proto, $ipvnum, $idnum);
- logmsg " server precheck FAILED (unresponsive $srvrname server)\n";
- return 0;
- }
- sub runhttpserver {
- my ($proto, $verb, $alt, $port_or_path) = @_;
- my $ip = $HOSTIP;
- my $ipvnum = 4;
- my $idnum = 1;
- my $exe = "$perl $srcdir/http-server.pl";
- my $verbose_flag = "--verbose ";
- my $keepalive_secs = 30;
-
- if($alt eq "ipv6") {
-
- $ipvnum = 6;
- $ip = $HOST6IP;
- }
- elsif($alt eq "proxy") {
-
- $idnum = 2;
- }
- elsif($alt eq "unix") {
-
- $ipvnum = "unix";
- }
- my $server = servername_id($proto, $ipvnum, $idnum);
- my $pidfile = $serverpidfile{$server};
-
- if ($doesntrun{$pidfile}) {
- return (2, 0, 0, 0);
- }
- my $pid = processexists($pidfile);
- if($pid > 0) {
- stopserver($server, "$pid");
- }
- unlink($pidfile) if(-f $pidfile);
- my $srvrname = servername_str($proto, $ipvnum, $idnum);
- my $portfile = $serverportfile{$server};
- my $logfile = server_logfilename($LOGDIR, $proto, $ipvnum, $idnum);
- my $flags = "";
- $flags .= "--gopher " if($proto eq "gopher");
- $flags .= "--connect $HOSTIP " if($alt eq "proxy");
- $flags .= "--keepalive $keepalive_secs ";
- $flags .= $verbose_flag if($debugprotocol);
- $flags .= "--pidfile \"$pidfile\" --logfile \"$logfile\" ";
- $flags .= "--logdir \"$LOGDIR\" ";
- $flags .= "--portfile $portfile ";
- $flags .= "--config $LOGDIR/$SERVERCMD ";
- $flags .= "--id $idnum " if($idnum > 1);
- if($ipvnum eq "unix") {
- $flags .= "--unix-socket '$port_or_path' ";
- } else {
- $flags .= "--ipv$ipvnum --port 0 ";
- }
- $flags .= "--srcdir \"$srcdir\"";
- my $cmd = "$exe $flags";
- my ($httppid, $pid2) = startnew($cmd, $pidfile, 15, 0);
- if($httppid <= 0 || !pidexists($httppid)) {
-
- logmsg "RUN: failed to start the $srvrname server\n";
- stopserver($server, "$pid2");
- $doesntrun{$pidfile} = 1;
- return (1, 0, 0, 0);
- }
-
- my $port = 0;
- if(!$port_or_path) {
- $port = $port_or_path = pidfromfile($portfile);
- }
-
- my $pid3 = verifyserver($proto, $ipvnum, $idnum, $ip, $port_or_path);
- if(!$pid3) {
- logmsg "RUN: $srvrname server failed verification\n";
-
- stopserver($server, "$httppid $pid2");
- $doesntrun{$pidfile} = 1;
- return (1, 0, 0, 0);
- }
- $pid2 = $pid3;
- if($verb) {
- logmsg "RUN: $srvrname server is on PID $httppid port $port_or_path\n";
- }
- return (0, $httppid, $pid2, $port);
- }
- sub runhttp2server {
- my ($verb) = @_;
- my $proto="http/2";
- my $ipvnum = 4;
- my $idnum = 0;
- my $exe = "$perl $srcdir/http2-server.pl";
- my $verbose_flag = "--verbose ";
- my $server = servername_id($proto, $ipvnum, $idnum);
- my $pidfile = $serverpidfile{$server};
-
- if ($doesntrun{$pidfile}) {
- return (2, 0, 0, 0, 0);
- }
- my $pid = processexists($pidfile);
- if($pid > 0) {
- stopserver($server, "$pid");
- }
- unlink($pidfile) if(-f $pidfile);
- my $srvrname = servername_str($proto, $ipvnum, $idnum);
- my $logfile = server_logfilename($LOGDIR, $proto, $ipvnum, $idnum);
- my $flags = "";
- $flags .= "--nghttpx \"$ENV{'NGHTTPX'}\" ";
- $flags .= "--pidfile \"$pidfile\" --logfile \"$logfile\" ";
- $flags .= "--logdir \"$LOGDIR\" ";
- $flags .= "--connect $HOSTIP:" . protoport("http") . " ";
- $flags .= $verbose_flag if($debugprotocol);
- my $port = getfreeport($ipvnum);
- my $port2 = getfreeport($ipvnum);
- my $aflags = "--port $port --port2 $port2 $flags";
- my $cmd = "$exe $aflags";
- my ($http2pid, $pid2) = startnew($cmd, $pidfile, 15, 0);
- if($http2pid <= 0 || !pidexists($http2pid)) {
-
- stopserver($server, "$pid2");
- $doesntrun{$pidfile} = 1;
- $http2pid = $pid2 = 0;
- logmsg "RUN: failed to start the $srvrname server\n";
- return (3, 0, 0, 0, 0);
- }
- $doesntrun{$pidfile} = 0;
- if($verb) {
- logmsg "RUN: $srvrname server PID $http2pid ".
- "http-port $port https-port $port2 ".
- "backend $HOSTIP:" . protoport("http") . "\n";
- }
- return (0+!$http2pid, $http2pid, $pid2, $port, $port2);
- }
- sub runhttp3server {
- my ($verb, $cert) = @_;
- my $proto="http/3";
- my $ipvnum = 4;
- my $idnum = 0;
- my $exe = "$perl $srcdir/http3-server.pl";
- my $verbose_flag = "--verbose ";
- my $server = servername_id($proto, $ipvnum, $idnum);
- my $pidfile = $serverpidfile{$server};
-
- if ($doesntrun{$pidfile}) {
- return (2, 0, 0, 0);
- }
- my $pid = processexists($pidfile);
- if($pid > 0) {
- stopserver($server, "$pid");
- }
- unlink($pidfile) if(-f $pidfile);
- my $srvrname = servername_str($proto, $ipvnum, $idnum);
- my $logfile = server_logfilename($LOGDIR, $proto, $ipvnum, $idnum);
- my $flags = "";
- $flags .= "--nghttpx \"$ENV{'NGHTTPX'}\" ";
- $flags .= "--pidfile \"$pidfile\" --logfile \"$logfile\" ";
- $flags .= "--logdir \"$LOGDIR\" ";
- $flags .= "--connect $HOSTIP:" . protoport("http") . " ";
- $flags .= "--cert \"$cert\" " if($cert);
- $flags .= $verbose_flag if($debugprotocol);
- my $port = getfreeport($ipvnum);
- my $aflags = "--port $port $flags";
- my $cmd = "$exe $aflags";
- my ($http3pid, $pid3) = startnew($cmd, $pidfile, 15, 0);
- if($http3pid <= 0 || !pidexists($http3pid)) {
-
- stopserver($server, "$pid3");
- $doesntrun{$pidfile} = 1;
- $http3pid = $pid3 = 0;
- logmsg "RUN: failed to start the $srvrname server\n";
- return (3, 0, 0, 0);
- }
- $doesntrun{$pidfile} = 0;
- if($verb) {
- logmsg "RUN: $srvrname server PID $http3pid port $port\n";
- }
- return (0+!$http3pid, $http3pid, $pid3, $port);
- }
- sub runhttpsserver {
- my ($verb, $proto, $proxy, $certfile) = @_;
- my $ip = $HOSTIP;
- my $ipvnum = 4;
- my $idnum = 1;
- if($proxy eq "proxy") {
-
- $idnum = 2;
- }
- if(!$stunnel) {
- return (4, 0, 0, 0);
- }
- my $server = servername_id($proto, $ipvnum, $idnum);
- my $pidfile = $serverpidfile{$server};
-
- if ($doesntrun{$pidfile}) {
- return (2, 0, 0, 0);
- }
- my $pid = processexists($pidfile);
- if($pid > 0) {
- stopserver($server, "$pid");
- }
- unlink($pidfile) if(-f $pidfile);
- my $srvrname = servername_str($proto, $ipvnum, $idnum);
- $certfile = 'stunnel.pem' unless($certfile);
- my $logfile = server_logfilename($LOGDIR, $proto, $ipvnum, $idnum);
- my $flags = "";
- $flags .= "--verbose " if($debugprotocol);
- $flags .= "--pidfile \"$pidfile\" --logfile \"$logfile\" ";
- $flags .= "--logdir \"$LOGDIR\" ";
- $flags .= "--id $idnum " if($idnum > 1);
- $flags .= "--ipv$ipvnum --proto $proto ";
- $flags .= "--certfile \"$certfile\" " if($certfile ne 'stunnel.pem');
- $flags .= "--stunnel \"$stunnel\" --srcdir \"$srcdir\" ";
- if($proto eq "gophers") {
- $flags .= "--connect " . protoport("gopher");
- }
- elsif(!$proxy) {
- $flags .= "--connect " . protoport("http");
- }
- else {
-
- $flags .= "--connect " . protoport("httpproxy");
- }
- my $port = getfreeport($ipvnum);
- my $options = "$flags --accept $port";
- my $cmd = "$perl $srcdir/secureserver.pl $options";
- my ($httpspid, $pid2) = startnew($cmd, $pidfile, 15, 0);
- if($httpspid <= 0 || !pidexists($httpspid)) {
-
-
-
- $doesntrun{$pidfile} = 1;
- $httpspid = $pid2 = 0;
- logmsg "RUN: failed to start the $srvrname server\n";
- return (3, 0, 0, 0);
- }
- $doesntrun{$pidfile} = 0;
-
- if($verb) {
- logmsg "RUN: $srvrname server is PID $httpspid port $port\n";
- }
- $runcert{$server} = $certfile;
- return (0+!$httpspid, $httpspid, $pid2, $port);
- }
- sub runhttptlsserver {
- my ($verb, $ipv6) = @_;
- my $proto = "httptls";
- my $ip = ($ipv6 && ($ipv6 =~ /6$/)) ? "$HOST6IP" : "$HOSTIP";
- my $ipvnum = ($ipv6 && ($ipv6 =~ /6$/)) ? 6 : 4;
- my $idnum = 1;
- if(!$httptlssrv) {
- return (4, 0, 0);
- }
- my $server = servername_id($proto, $ipvnum, $idnum);
- my $pidfile = $serverpidfile{$server};
-
- if ($doesntrun{$pidfile}) {
- return (2, 0, 0, 0);
- }
- my $pid = processexists($pidfile);
- if($pid > 0) {
- stopserver($server, "$pid");
- }
- unlink($pidfile) if(-f $pidfile);
- my $srvrname = servername_str($proto, $ipvnum, $idnum);
- my $logfile = server_logfilename($LOGDIR, $proto, $ipvnum, $idnum);
- my $flags = "";
- $flags .= "--http ";
- $flags .= "--debug 1 " if($debugprotocol);
- $flags .= "--priority NORMAL:+SRP ";
- $flags .= "--srppasswd $srcdir/certs/srp-verifier-db ";
- $flags .= "--srppasswdconf $srcdir/certs/srp-verifier-conf";
- my $port = getfreeport($ipvnum);
- my $allflags = "--port $port $flags";
- my $cmd = "$httptlssrv $allflags > $logfile 2>&1";
- my ($httptlspid, $pid2) = startnew($cmd, $pidfile, 10, 1);
- if($httptlspid <= 0 || !pidexists($httptlspid)) {
-
- stopserver($server, "$pid2");
- $doesntrun{$pidfile} = 1;
- $httptlspid = $pid2 = 0;
- logmsg "RUN: failed to start the $srvrname server\n";
- return (3, 0, 0, 0);
- }
- $doesntrun{$pidfile} = 0;
- if($verb) {
- logmsg "RUN: $srvrname server PID $httptlspid port $port\n";
- }
- return (0+!$httptlspid, $httptlspid, $pid2, $port);
- }
- sub runpingpongserver {
- my ($proto, $id, $verb, $ipv6) = @_;
-
- if($proto !~ /^(?:ftp|imap|pop3|smtp)$/) {
- logmsg "Unsupported protocol $proto!!\n";
- return (4, 0, 0);
- }
- my $ip = ($ipv6 && ($ipv6 =~ /6$/)) ? "$HOST6IP" : "$HOSTIP";
- my $ipvnum = ($ipv6 && ($ipv6 =~ /6$/)) ? 6 : 4;
- my $idnum = ($id && ($id =~ /^(\d+)$/) && ($id > 1)) ? $id : 1;
- my $server = servername_id($proto, $ipvnum, $idnum);
- my $pidfile = $serverpidfile{$server};
- my $portfile = $serverportfile{$server};
-
- if ($doesntrun{$pidfile}) {
- return (2, 0, 0);
- }
- my $pid = processexists($pidfile);
- if($pid > 0) {
- stopserver($server, "$pid");
- }
- unlink($pidfile) if(-f $pidfile);
- my $srvrname = servername_str($proto, $ipvnum, $idnum);
- my $logfile = server_logfilename($LOGDIR, $proto, $ipvnum, $idnum);
- my $flags = "";
- $flags .= "--verbose " if($debugprotocol);
- $flags .= "--pidfile \"$pidfile\" --logfile \"$logfile\" ";
- $flags .= "--logdir \"$LOGDIR\" ";
- $flags .= "--portfile \"$portfile\" ";
- $flags .= "--srcdir \"$srcdir\" --proto $proto ";
- $flags .= "--id $idnum " if($idnum > 1);
- $flags .= "--ipv$ipvnum --port 0 --addr \"$ip\"";
- my $cmd = "$perl $srcdir/ftpserver.pl $flags";
- my ($ftppid, $pid2) = startnew($cmd, $pidfile, 15, 0);
- if($ftppid <= 0 || !pidexists($ftppid)) {
-
- logmsg "RUN: failed to start the $srvrname server\n";
- stopserver($server, "$pid2");
- $doesntrun{$pidfile} = 1;
- return (1, 0, 0);
- }
-
- my $port = pidfromfile($portfile);
- logmsg "PINGPONG runs on port $port ($portfile)\n" if($verb);
-
- my $pid3 = verifyserver($proto, $ipvnum, $idnum, $ip, $port);
- if(!$pid3) {
- logmsg "RUN: $srvrname server failed verification\n";
-
- stopserver($server, "$ftppid $pid2");
- $doesntrun{$pidfile} = 1;
- return (1, 0, 0);
- }
- $pid2 = $pid3;
- logmsg "RUN: $srvrname server is PID $ftppid port $port\n" if($verb);
-
- $PORT{$proto . ($ipvnum == 6? '6': '')} = $port;
- return (0, $pid2, $ftppid);
- }
- sub runsecureserver {
- my ($verb, $ipv6, $certfile, $proto, $clearport) = @_;
- my $ip = ($ipv6 && ($ipv6 =~ /6$/)) ? "$HOST6IP" : "$HOSTIP";
- my $ipvnum = ($ipv6 && ($ipv6 =~ /6$/)) ? 6 : 4;
- my $idnum = 1;
- if(!$stunnel) {
- return (4, 0, 0, 0);
- }
- my $server = servername_id($proto, $ipvnum, $idnum);
- my $pidfile = $serverpidfile{$server};
-
- if ($doesntrun{$pidfile}) {
- return (2, 0, 0, 0);
- }
- my $pid = processexists($pidfile);
- if($pid > 0) {
- stopserver($server, "$pid");
- }
- unlink($pidfile) if(-f $pidfile);
- my $srvrname = servername_str($proto, $ipvnum, $idnum);
- $certfile = 'stunnel.pem' unless($certfile);
- my $logfile = server_logfilename($LOGDIR, $proto, $ipvnum, $idnum);
- my $flags = "";
- $flags .= "--verbose " if($debugprotocol);
- $flags .= "--pidfile \"$pidfile\" --logfile \"$logfile\" ";
- $flags .= "--logdir \"$LOGDIR\" ";
- $flags .= "--id $idnum " if($idnum > 1);
- $flags .= "--ipv$ipvnum --proto $proto ";
- $flags .= "--certfile \"$certfile\" " if($certfile ne 'stunnel.pem');
- $flags .= "--stunnel \"$stunnel\" --srcdir \"$srcdir\" ";
- $flags .= "--connect $clearport";
- my $port = getfreeport($ipvnum);
- my $options = "$flags --accept $port";
- my $cmd = "$perl $srcdir/secureserver.pl $options";
- my ($protospid, $pid2) = startnew($cmd, $pidfile, 15, 0);
- if($protospid <= 0 || !pidexists($protospid)) {
-
-
-
- $doesntrun{$pidfile} = 1;
- $protospid = $pid2 = 0;
- logmsg "RUN: failed to start the $srvrname server\n";
- return (3, 0, 0, 0);
- }
- $doesntrun{$pidfile} = 0;
- $runcert{$server} = $certfile;
- if($verb) {
- logmsg "RUN: $srvrname server is PID $protospid port $port\n";
- }
- return (0+!$protospid, $protospid, $pid2, $port);
- }
- sub runtftpserver {
- my ($id, $verb, $ipv6) = @_;
- my $ip = $HOSTIP;
- my $proto = 'tftp';
- my $ipvnum = 4;
- my $idnum = ($id && ($id =~ /^(\d+)$/) && ($id > 1)) ? $id : 1;
- if($ipv6) {
-
- $ipvnum = 6;
- $ip = $HOST6IP;
- }
- my $server = servername_id($proto, $ipvnum, $idnum);
- my $pidfile = $serverpidfile{$server};
-
- if ($doesntrun{$pidfile}) {
- return (2, 0, 0, 0);
- }
- my $pid = processexists($pidfile);
- if($pid > 0) {
- stopserver($server, "$pid");
- }
- unlink($pidfile) if(-f $pidfile);
- my $srvrname = servername_str($proto, $ipvnum, $idnum);
- my $portfile = $serverportfile{$server};
- my $logfile = server_logfilename($LOGDIR, $proto, $ipvnum, $idnum);
- my $flags = "";
- $flags .= "--verbose " if($debugprotocol);
- $flags .= "--pidfile \"$pidfile\" ";
- $flags .= "--portfile \"$portfile\" ";
- $flags .= "--logfile \"$logfile\" ";
- $flags .= "--logdir \"$LOGDIR\" ";
- $flags .= "--id $idnum " if($idnum > 1);
- $flags .= "--ipv$ipvnum --port 0 --srcdir \"$srcdir\"";
- my $cmd = "$perl $srcdir/tftpserver.pl $flags";
- my ($tftppid, $pid2) = startnew($cmd, $pidfile, 15, 0);
- if($tftppid <= 0 || !pidexists($tftppid)) {
-
- logmsg "RUN: failed to start the $srvrname server\n";
- stopserver($server, "$pid2");
- $doesntrun{$pidfile} = 1;
- return (1, 0, 0, 0);
- }
- my $port = pidfromfile($portfile);
-
- my $pid3 = verifyserver($proto, $ipvnum, $idnum, $ip, $port);
- if(!$pid3) {
- logmsg "RUN: $srvrname server failed verification\n";
-
- stopserver($server, "$tftppid $pid2");
- $doesntrun{$pidfile} = 1;
- return (1, 0, 0, 0);
- }
- $pid2 = $pid3;
- if($verb) {
- logmsg "RUN: $srvrname server on PID $tftppid port $port\n";
- }
- return (0, $pid2, $tftppid, $port);
- }
- sub runrtspserver {
- my ($verb, $ipv6) = @_;
- my $ip = $HOSTIP;
- my $proto = 'rtsp';
- my $ipvnum = 4;
- my $idnum = 1;
- if($ipv6) {
-
- $ipvnum = 6;
- $ip = $HOST6IP;
- }
- my $server = servername_id($proto, $ipvnum, $idnum);
- my $pidfile = $serverpidfile{$server};
- my $portfile = $serverportfile{$server};
-
- if ($doesntrun{$pidfile}) {
- return (2, 0, 0, 0);
- }
- my $pid = processexists($pidfile);
- if($pid > 0) {
- stopserver($server, "$pid");
- }
- unlink($pidfile) if(-f $pidfile);
- my $srvrname = servername_str($proto, $ipvnum, $idnum);
- my $logfile = server_logfilename($LOGDIR, $proto, $ipvnum, $idnum);
- my $flags = "";
- $flags .= "--verbose " if($debugprotocol);
- $flags .= "--pidfile \"$pidfile\" ";
- $flags .= "--portfile \"$portfile\" ";
- $flags .= "--logfile \"$logfile\" ";
- $flags .= "--logdir \"$LOGDIR\" ";
- $flags .= "--id $idnum " if($idnum > 1);
- $flags .= "--ipv$ipvnum --port 0 --srcdir \"$srcdir\"";
- my $cmd = "$perl $srcdir/rtspserver.pl $flags";
- my ($rtsppid, $pid2) = startnew($cmd, $pidfile, 15, 0);
- if($rtsppid <= 0 || !pidexists($rtsppid)) {
-
- logmsg "RUN: failed to start the $srvrname server\n";
- stopserver($server, "$pid2");
- $doesntrun{$pidfile} = 1;
- return (1, 0, 0, 0);
- }
- my $port = pidfromfile($portfile);
-
- my $pid3 = verifyserver($proto, $ipvnum, $idnum, $ip, $port);
- if(!$pid3) {
- logmsg "RUN: $srvrname server failed verification\n";
-
- stopserver($server, "$rtsppid $pid2");
- $doesntrun{$pidfile} = 1;
- return (1, 0, 0, 0);
- }
- $pid2 = $pid3;
- if($verb) {
- logmsg "RUN: $srvrname server PID $rtsppid port $port\n";
- }
- return (0, $rtsppid, $pid2, $port);
- }
- sub runsshserver {
- my ($id, $verb, $ipv6) = @_;
- my $ip=$HOSTIP;
- my $proto = 'ssh';
- my $ipvnum = 4;
- my $idnum = ($id && ($id =~ /^(\d+)$/) && ($id > 1)) ? $id : 1;
- if(!$USER) {
- logmsg "Can't start ssh server due to lack of USER name\n";
- return (4, 0, 0, 0);
- }
- my $server = servername_id($proto, $ipvnum, $idnum);
- my $pidfile = $serverpidfile{$server};
-
- if ($doesntrun{$pidfile}) {
- return (2, 0, 0, 0);
- }
- my $sshd = find_sshd();
- if($sshd) {
- ($sshdid,$sshdvernum,$sshdverstr,$sshderror) = sshversioninfo($sshd);
- logmsg $sshderror if($sshderror);
- }
- my $pid = processexists($pidfile);
- if($pid > 0) {
- stopserver($server, "$pid");
- }
- unlink($pidfile) if(-f $pidfile);
- my $srvrname = servername_str($proto, $ipvnum, $idnum);
- my $logfile = server_logfilename($LOGDIR, $proto, $ipvnum, $idnum);
- my $flags = "";
- $flags .= "--verbose " if($verb);
- $flags .= "--debugprotocol " if($debugprotocol);
- $flags .= "--pidfile \"$pidfile\" ";
- $flags .= "--logdir \"$LOGDIR\" ";
- $flags .= "--id $idnum " if($idnum > 1);
- $flags .= "--ipv$ipvnum --addr \"$ip\" ";
- $flags .= "--user \"$USER\"";
- my @tports;
- my $port = getfreeport($ipvnum);
- push @tports, $port;
- my $options = "$flags --sshport $port";
- my $cmd = "$perl $srcdir/sshserver.pl $options";
- my ($sshpid, $pid2) = startnew($cmd, $pidfile, 60, 0);
-
-
-
-
- if($sshpid <= 0 || !pidexists($sshpid)) {
-
- stopserver($server, "$pid2");
- $doesntrun{$pidfile} = 1;
- $sshpid = $pid2 = 0;
- logmsg "RUN: failed to start the $srvrname server on $port\n";
- return (3, 0, 0, 0);
- }
-
-
-
-
- $sshdlog = server_logfilename($LOGDIR, 'ssh', $ipvnum, $idnum);
- $sftplog = server_logfilename($LOGDIR, 'sftp', $ipvnum, $idnum);
- if(verifysftp('sftp', $ipvnum, $idnum, $ip, $port) < 1) {
- logmsg "RUN: SFTP server failed verification\n";
-
- display_sftplog();
- display_sftpconfig();
- display_sshdlog();
- display_sshdconfig();
- stopserver($server, "$sshpid $pid2");
- $doesntrun{$pidfile} = 1;
- $sshpid = $pid2 = 0;
- logmsg "RUN: failed to verify the $srvrname server on $port\n";
- return (5, 0, 0, 0);
- }
-
- $doesntrun{$pidfile} = 0;
- my $hostfile;
- if(!open($hostfile, "<", "$LOGDIR/$PIDDIR/$hstpubmd5f") ||
- (read($hostfile, $SSHSRVMD5, 32) != 32) ||
- !close($hostfile) ||
- ($SSHSRVMD5 !~ /^[a-f0-9]{32}$/i))
- {
- my $msg = "Fatal: $srvrname pubkey md5 missing : \"$hstpubmd5f\" : $!";
- logmsg "$msg\n";
- stopservers($verb);
- die $msg;
- }
- if(!open($hostfile, "<", "$LOGDIR/$PIDDIR/$hstpubsha256f") ||
- (read($hostfile, $SSHSRVSHA256, 48) == 0) ||
- !close($hostfile))
- {
- my $msg = "Fatal: $srvrname pubkey sha256 missing : \"$hstpubsha256f\" : $!";
- logmsg "$msg\n";
- stopservers($verb);
- die $msg;
- }
- logmsg "RUN: $srvrname on PID $pid2 port $port\n" if($verb);
- return (0, $pid2, $sshpid, $port);
- }
- sub runmqttserver {
- my ($id, $verb, $ipv6) = @_;
- my $ip=$HOSTIP;
- my $proto = 'mqtt';
- my $port = protoport($proto);
- my $ipvnum = 4;
- my $idnum = ($id && ($id =~ /^(\d+)$/) && ($id > 1)) ? $id : 1;
- my $server = servername_id($proto, $ipvnum, $idnum);
- my $pidfile = $serverpidfile{$server};
- my $portfile = $serverportfile{$server};
-
- if ($doesntrun{$pidfile}) {
- return (2, 0, 0);
- }
- my $pid = processexists($pidfile);
- if($pid > 0) {
- stopserver($server, "$pid");
- }
- unlink($pidfile) if(-f $pidfile);
- my $srvrname = servername_str($proto, $ipvnum, $idnum);
- my $logfile = server_logfilename($LOGDIR, $proto, $ipvnum, $idnum);
-
- my $cmd="server/mqttd".exe_ext('SRV').
- " --port 0 ".
- " --pidfile $pidfile".
- " --portfile $portfile".
- " --config $LOGDIR/$SERVERCMD".
- " --logfile $logfile".
- " --logdir $LOGDIR";
- my ($sockspid, $pid2) = startnew($cmd, $pidfile, 30, 0);
- if($sockspid <= 0 || !pidexists($sockspid)) {
-
- logmsg "RUN: failed to start the $srvrname server\n";
- stopserver($server, "$pid2");
- $doesntrun{$pidfile} = 1;
- return (1, 0, 0);
- }
- my $mqttport = pidfromfile($portfile);
- if($verb) {
- logmsg "RUN: $srvrname server is now running PID $pid2 on PORT $mqttport\n";
- }
- return (0, $pid2, $sockspid, $mqttport);
- }
- sub runsocksserver {
- my ($id, $verb, $ipv6, $is_unix) = @_;
- my $ip=$HOSTIP;
- my $proto = 'socks';
- my $ipvnum = 4;
- my $idnum = ($id && ($id =~ /^(\d+)$/) && ($id > 1)) ? $id : 1;
- my $server = servername_id($proto, $ipvnum, $idnum);
- my $pidfile = $serverpidfile{$server};
-
- if ($doesntrun{$pidfile}) {
- return (2, 0, 0, 0);
- }
- my $pid = processexists($pidfile);
- if($pid > 0) {
- stopserver($server, "$pid");
- }
- unlink($pidfile) if(-f $pidfile);
- my $srvrname = servername_str($proto, $ipvnum, $idnum);
- my $portfile = $serverportfile{$server};
- my $logfile = server_logfilename($LOGDIR, $proto, $ipvnum, $idnum);
-
- my $cmd="";
- if($is_unix) {
- $cmd="server/socksd".exe_ext('SRV').
- " --pidfile $pidfile".
- " --reqfile $LOGDIR/$SOCKSIN".
- " --logfile $logfile".
- " --unix-socket $SOCKSUNIXPATH".
- " --backend $HOSTIP".
- " --config $LOGDIR/$SERVERCMD";
- } else {
- $cmd="server/socksd".exe_ext('SRV').
- " --port 0 ".
- " --pidfile $pidfile".
- " --portfile $portfile".
- " --reqfile $LOGDIR/$SOCKSIN".
- " --logfile $logfile".
- " --backend $HOSTIP".
- " --config $LOGDIR/$SERVERCMD";
- }
- my ($sockspid, $pid2) = startnew($cmd, $pidfile, 30, 0);
- if($sockspid <= 0 || !pidexists($sockspid)) {
-
- logmsg "RUN: failed to start the $srvrname server\n";
- stopserver($server, "$pid2");
- $doesntrun{$pidfile} = 1;
- return (1, 0, 0, 0);
- }
- my $port = pidfromfile($portfile);
- if($verb) {
- logmsg "RUN: $srvrname server is now running PID $pid2\n";
- }
- return (0, $pid2, $sockspid, $port);
- }
- sub rundictserver {
- my ($verb, $alt) = @_;
- my $proto = "dict";
- my $ip = $HOSTIP;
- my $ipvnum = 4;
- my $idnum = 1;
- if($alt eq "ipv6") {
-
- }
- my $server = servername_id($proto, $ipvnum, $idnum);
- my $pidfile = $serverpidfile{$server};
-
- if ($doesntrun{$pidfile}) {
- return (2, 0, 0, 0);
- }
- my $pid = processexists($pidfile);
- if($pid > 0) {
- stopserver($server, "$pid");
- }
- unlink($pidfile) if(-f $pidfile);
- my $srvrname = servername_str($proto, $ipvnum, $idnum);
- my $logfile = server_logfilename($LOGDIR, $proto, $ipvnum, $idnum);
- my $flags = "";
- $flags .= "--verbose 1 " if($debugprotocol);
- $flags .= "--pidfile \"$pidfile\" --logfile \"$logfile\" ";
- $flags .= "--id $idnum " if($idnum > 1);
- $flags .= "--srcdir \"$srcdir\" ";
- $flags .= "--host $HOSTIP";
- my $port = getfreeport($ipvnum);
- my $aflags = "--port $port $flags";
- my $cmd = "$srcdir/dictserver.py $aflags";
- my ($dictpid, $pid2) = startnew($cmd, $pidfile, 15, 0);
- if($dictpid <= 0 || !pidexists($dictpid)) {
-
- stopserver($server, "$pid2");
- $doesntrun{$pidfile} = 1;
- $dictpid = $pid2 = 0;
- logmsg "RUN: failed to start the $srvrname server\n";
- return (3, 0, 0, 0);
- }
- $doesntrun{$pidfile} = 0;
- if($verb) {
- logmsg "RUN: $srvrname server PID $dictpid port $port\n";
- }
- return (0+!$dictpid, $dictpid, $pid2, $port);
- }
- sub runsmbserver {
- my ($verb, $alt) = @_;
- my $proto = "smb";
- my $ip = $HOSTIP;
- my $ipvnum = 4;
- my $idnum = 1;
- if($alt eq "ipv6") {
-
- }
- my $server = servername_id($proto, $ipvnum, $idnum);
- my $pidfile = $serverpidfile{$server};
-
- if ($doesntrun{$pidfile}) {
- return (2, 0, 0, 0);
- }
- my $pid = processexists($pidfile);
- if($pid > 0) {
- stopserver($server, "$pid");
- }
- unlink($pidfile) if(-f $pidfile);
- my $srvrname = servername_str($proto, $ipvnum, $idnum);
- my $logfile = server_logfilename($LOGDIR, $proto, $ipvnum, $idnum);
- my $flags = "";
- $flags .= "--verbose 1 " if($debugprotocol);
- $flags .= "--pidfile \"$pidfile\" --logfile \"$logfile\" ";
- $flags .= "--id $idnum " if($idnum > 1);
- $flags .= "--srcdir \"$srcdir\" ";
- $flags .= "--host $HOSTIP";
- my $port = getfreeport($ipvnum);
- my $aflags = "--port $port $flags";
- my $cmd = "$srcdir/smbserver.py $aflags";
- my ($smbpid, $pid2) = startnew($cmd, $pidfile, 15, 0);
- if($smbpid <= 0 || !pidexists($smbpid)) {
-
- stopserver($server, "$pid2");
- $doesntrun{$pidfile} = 1;
- $smbpid = $pid2 = 0;
- logmsg "RUN: failed to start the $srvrname server\n";
- return (3, 0, 0, 0);
- }
- $doesntrun{$pidfile} = 0;
- if($verb) {
- logmsg "RUN: $srvrname server PID $smbpid port $port\n";
- }
- return (0+!$smbpid, $smbpid, $pid2, $port);
- }
- sub runnegtelnetserver {
- my ($verb, $alt) = @_;
- my $proto = "telnet";
- my $ip = $HOSTIP;
- my $ipvnum = 4;
- my $idnum = 1;
- if($alt eq "ipv6") {
-
- }
- my $server = servername_id($proto, $ipvnum, $idnum);
- my $pidfile = $serverpidfile{$server};
-
- if ($doesntrun{$pidfile}) {
- return (2, 0, 0, 0);
- }
- my $pid = processexists($pidfile);
- if($pid > 0) {
- stopserver($server, "$pid");
- }
- unlink($pidfile) if(-f $pidfile);
- my $srvrname = servername_str($proto, $ipvnum, $idnum);
- my $logfile = server_logfilename($LOGDIR, $proto, $ipvnum, $idnum);
- my $flags = "";
- $flags .= "--verbose 1 " if($debugprotocol);
- $flags .= "--pidfile \"$pidfile\" --logfile \"$logfile\" ";
- $flags .= "--id $idnum " if($idnum > 1);
- $flags .= "--srcdir \"$srcdir\"";
- my $port = getfreeport($ipvnum);
- my $aflags = "--port $port $flags";
- my $cmd = "$srcdir/negtelnetserver.py $aflags";
- my ($ntelpid, $pid2) = startnew($cmd, $pidfile, 15, 0);
- if($ntelpid <= 0 || !pidexists($ntelpid)) {
-
- stopserver($server, "$pid2");
- $doesntrun{$pidfile} = 1;
- $ntelpid = $pid2 = 0;
- logmsg "RUN: failed to start the $srvrname server\n";
- return (3, 0, 0, 0);
- }
- $doesntrun{$pidfile} = 0;
- if($verb) {
- logmsg "RUN: $srvrname server PID $ntelpid port $port\n";
- }
- return (0+!$ntelpid, $ntelpid, $pid2, $port);
- }
- sub responsive_http_server {
- my ($proto, $verb, $alt, $port_or_path, $do_http3) = @_;
- my $ip = $HOSTIP;
- my $ipvnum = 4;
- my $idnum = 1;
- if($alt eq "ipv6") {
-
- $ipvnum = 6;
- $ip = $HOST6IP;
- }
- elsif($alt eq "proxy") {
- $idnum = 2;
- }
- elsif($alt eq "unix") {
-
- $ipvnum = "unix";
- }
- return &responsiveserver($proto, $ipvnum, $idnum, $ip, $port_or_path, $do_http3);
- }
- sub responsive_mqtt_server {
- my ($proto, $id, $verb, $ipv6) = @_;
- my $ip = ($ipv6 && ($ipv6 =~ /6$/)) ? "$HOST6IP" : "$HOSTIP";
- my $ipvnum = ($ipv6 && ($ipv6 =~ /6$/)) ? 6 : 4;
- my $idnum = ($id && ($id =~ /^(\d+)$/) && ($id > 1)) ? $id : 1;
- return &responsiveserver($proto, $ipvnum, $idnum, $ip);
- }
- sub responsive_pingpong_server {
- my ($proto, $id, $verb, $ipv6) = @_;
- my $port;
- my $ip = ($ipv6 && ($ipv6 =~ /6$/)) ? "$HOST6IP" : "$HOSTIP";
- my $ipvnum = ($ipv6 && ($ipv6 =~ /6$/)) ? 6 : 4;
- my $idnum = ($id && ($id =~ /^(\d+)$/) && ($id > 1)) ? $id : 1;
- my $protoip = $proto . ($ipvnum == 6? '6': '');
- if($proto =~ /^(?:ftp|imap|pop3|smtp)$/) {
- $port = protoport($protoip);
- }
- else {
- logmsg "Unsupported protocol $proto!!\n";
- return 0;
- }
- return &responsiveserver($proto, $ipvnum, $idnum, $ip, $port);
- }
- sub responsive_rtsp_server {
- my ($verb, $ipv6) = @_;
- my $proto = 'rtsp';
- my $port = protoport($proto);
- my $ip = $HOSTIP;
- my $ipvnum = 4;
- my $idnum = 1;
- if($ipv6) {
-
- $ipvnum = 6;
- $port = protoport('rtsp6');
- $ip = $HOST6IP;
- }
- return &responsiveserver($proto, $ipvnum, $idnum, $ip, $port);
- }
- sub responsive_tftp_server {
- my ($id, $verb, $ipv6) = @_;
- my $proto = 'tftp';
- my $port = protoport($proto);
- my $ip = $HOSTIP;
- my $ipvnum = 4;
- my $idnum = ($id && ($id =~ /^(\d+)$/) && ($id > 1)) ? $id : 1;
- if($ipv6) {
-
- $ipvnum = 6;
- $port = protoport('tftp6');
- $ip = $HOST6IP;
- }
- return &responsiveserver($proto, $ipvnum, $idnum, $ip, $port);
- }
- sub responsive_httptls_server {
- my ($verb, $ipv6) = @_;
- my $ipvnum = ($ipv6 && ($ipv6 =~ /6$/)) ? 6 : 4;
- my $proto = "httptls";
- my $port = protoport($proto);
- my $ip = "$HOSTIP";
- my $idnum = 1;
- if ($ipvnum == 6) {
- $port = protoport("httptls6");
- $ip = "$HOST6IP";
- }
- return &responsiveserver($proto, $ipvnum, $idnum, $ip, $port);
- }
- sub startservers {
- my @what = @_;
- my ($pid, $pid2);
- my $serr;
- for(@what) {
- my (@whatlist) = split(/\s+/,$_);
- my $what = lc($whatlist[0]);
- $what =~ s/[^a-z0-9\/-]//g;
- my $certfile;
- if($what =~ /^(ftp|gopher|http|imap|pop3|smtp)s((\d*)(-ipv6|-unix|))$/) {
- $certfile = ($whatlist[1]) ? $whatlist[1] : 'stunnel.pem';
- }
- if(($what eq "pop3") ||
- ($what eq "ftp") ||
- ($what eq "imap") ||
- ($what eq "smtp")) {
- if($run{$what} &&
- !responsive_pingpong_server($what, "", $verbose)) {
- if(stopserver($what)) {
- return ("failed stopping unresponsive ".uc($what)." server", 3);
- }
- }
- if(!$run{$what}) {
- ($serr, $pid, $pid2) = runpingpongserver($what, "", $verbose);
- if($pid <= 0) {
- return ("failed starting ". uc($what) ." server", $serr);
- }
- logmsg sprintf("* pid $what => %d %d\n", $pid, $pid2) if($verbose);
- $run{$what}="$pid $pid2";
- }
- }
- elsif($what eq "ftp-ipv6") {
- if($run{'ftp-ipv6'} &&
- !responsive_pingpong_server("ftp", "", $verbose, "ipv6")) {
- if(stopserver('ftp-ipv6')) {
- return ("failed stopping unresponsive FTP-IPv6 server", 3);
- }
- }
- if(!$run{'ftp-ipv6'}) {
- ($serr, $pid, $pid2) = runpingpongserver("ftp", "", $verbose, "ipv6");
- if($pid <= 0) {
- return ("failed starting FTP-IPv6 server", $serr);
- }
- logmsg sprintf("* pid ftp-ipv6 => %d %d\n", $pid,
- $pid2) if($verbose);
- $run{'ftp-ipv6'}="$pid $pid2";
- }
- }
- elsif($what eq "gopher") {
- if($run{'gopher'} &&
- !responsive_http_server("gopher", $verbose, 0,
- protoport("gopher"))) {
- if(stopserver('gopher')) {
- return ("failed stopping unresponsive GOPHER server", 3);
- }
- }
- if(!$run{'gopher'}) {
- ($serr, $pid, $pid2, $PORT{'gopher'}) =
- runhttpserver("gopher", $verbose, 0);
- if($pid <= 0) {
- return ("failed starting GOPHER server", $serr);
- }
- logmsg sprintf ("* pid gopher => %d %d\n", $pid, $pid2)
- if($verbose);
- $run{'gopher'}="$pid $pid2";
- }
- }
- elsif($what eq "gopher-ipv6") {
- if($run{'gopher-ipv6'} &&
- !responsive_http_server("gopher", $verbose, "ipv6",
- protoport("gopher"))) {
- if(stopserver('gopher-ipv6')) {
- return ("failed stopping unresponsive GOPHER-IPv6 server", 3);
- }
- }
- if(!$run{'gopher-ipv6'}) {
- ($serr, $pid, $pid2, $PORT{"gopher6"}) =
- runhttpserver("gopher", $verbose, "ipv6");
- if($pid <= 0) {
- return ("failed starting GOPHER-IPv6 server", $serr);
- }
- logmsg sprintf("* pid gopher-ipv6 => %d %d\n", $pid,
- $pid2) if($verbose);
- $run{'gopher-ipv6'}="$pid $pid2";
- }
- }
- elsif($what eq "http") {
- if($run{'http'} &&
- !responsive_http_server("http", $verbose, 0, protoport('http'))) {
- logmsg "* restarting unresponsive HTTP server\n";
- if(stopserver('http')) {
- return ("failed stopping unresponsive HTTP server", 3);
- }
- }
- if(!$run{'http'}) {
- ($serr, $pid, $pid2, $PORT{'http'}) =
- runhttpserver("http", $verbose, 0);
- if($pid <= 0) {
- return ("failed starting HTTP server", $serr);
- }
- logmsg sprintf ("* pid http => %d %d\n", $pid, $pid2)
- if($verbose);
- $run{'http'}="$pid $pid2";
- }
- }
- elsif($what eq "http-proxy") {
- if($run{'http-proxy'} &&
- !responsive_http_server("http", $verbose, "proxy",
- protoport("httpproxy"))) {
- if(stopserver('http-proxy')) {
- return ("failed stopping unresponsive HTTP-proxy server", 3);
- }
- }
- if(!$run{'http-proxy'}) {
- ($serr, $pid, $pid2, $PORT{"httpproxy"}) =
- runhttpserver("http", $verbose, "proxy");
- if($pid <= 0) {
- return ("failed starting HTTP-proxy server", $serr);
- }
- logmsg sprintf ("* pid http-proxy => %d %d\n", $pid, $pid2)
- if($verbose);
- $run{'http-proxy'}="$pid $pid2";
- }
- }
- elsif($what eq "http-ipv6") {
- if($run{'http-ipv6'} &&
- !responsive_http_server("http", $verbose, "ipv6",
- protoport("http6"))) {
- if(stopserver('http-ipv6')) {
- return ("failed stopping unresponsive HTTP-IPv6 server", 3);
- }
- }
- if(!$run{'http-ipv6'}) {
- ($serr, $pid, $pid2, $PORT{"http6"}) =
- runhttpserver("http", $verbose, "ipv6");
- if($pid <= 0) {
- return ("failed starting HTTP-IPv6 server", $serr);
- }
- logmsg sprintf("* pid http-ipv6 => %d %d\n", $pid, $pid2)
- if($verbose);
- $run{'http-ipv6'}="$pid $pid2";
- }
- }
- elsif($what eq "rtsp") {
- if($run{'rtsp'} &&
- !responsive_rtsp_server($verbose)) {
- if(stopserver('rtsp')) {
- return ("failed stopping unresponsive RTSP server", 3);
- }
- }
- if(!$run{'rtsp'}) {
- ($serr, $pid, $pid2, $PORT{'rtsp'}) = runrtspserver($verbose);
- if($pid <= 0) {
- return ("failed starting RTSP server", $serr);
- }
- logmsg sprintf("* pid rtsp => %d %d\n", $pid, $pid2) if($verbose);
- $run{'rtsp'}="$pid $pid2";
- }
- }
- elsif($what eq "rtsp-ipv6") {
- if($run{'rtsp-ipv6'} &&
- !responsive_rtsp_server($verbose, "ipv6")) {
- if(stopserver('rtsp-ipv6')) {
- return ("failed stopping unresponsive RTSP-IPv6 server", 3);
- }
- }
- if(!$run{'rtsp-ipv6'}) {
- ($serr, $pid, $pid2, $PORT{'rtsp6'}) = runrtspserver($verbose, "ipv6");
- if($pid <= 0) {
- return ("failed starting RTSP-IPv6 server", $serr);
- }
- logmsg sprintf("* pid rtsp-ipv6 => %d %d\n", $pid, $pid2)
- if($verbose);
- $run{'rtsp-ipv6'}="$pid $pid2";
- }
- }
- elsif($what =~ /^(ftp|imap|pop3|smtp)s$/) {
- my $cproto = $1;
- if(!$stunnel) {
-
- return ("no stunnel", 4);
- }
- if($runcert{$what} && ($runcert{$what} ne $certfile)) {
-
- if(stopserver($what)) {
- return ("failed stopping $what server with different cert", 3);
- }
- }
- if($run{$cproto} &&
- !responsive_pingpong_server($cproto, "", $verbose)) {
- if(stopserver($cproto)) {
- return ("failed stopping unresponsive $cproto server", 3);
- }
- }
- if(!$run{$cproto}) {
- ($serr, $pid, $pid2) = runpingpongserver($cproto, "", $verbose);
- if($pid <= 0) {
- return ("failed starting $cproto server", $serr);
- }
- logmsg sprintf("* pid $cproto => %d %d\n", $pid, $pid2) if($verbose);
- $run{$cproto}="$pid $pid2";
- }
- if(!$run{$what}) {
- ($serr, $pid, $pid2, $PORT{$what}) =
- runsecureserver($verbose, "", $certfile, $what,
- protoport($cproto));
- if($pid <= 0) {
- return ("failed starting $what server (stunnel)", $serr);
- }
- logmsg sprintf("* pid $what => %d %d\n", $pid, $pid2)
- if($verbose);
- $run{$what}="$pid $pid2";
- }
- }
- elsif($what eq "file") {
-
- }
- elsif($what eq "https") {
- if(!$stunnel) {
-
- return ("no stunnel", 4);
- }
- if($runcert{'https'} && ($runcert{'https'} ne $certfile)) {
-
- if(stopserver('https')) {
- return ("failed stopping HTTPS server with different cert", 3);
- }
-
- if($run{'http'} && stopserver('http')) {
- return ("failed stopping HTTP server", 3);
- }
- }
- if($run{'https'} &&
- !responsive_http_server("https", $verbose, 0,
- protoport('https'))) {
- if(stopserver('https')) {
- return ("failed stopping unresponsive HTTPS server", 3);
- }
-
- if($run{'http'} && stopserver('http')) {
- return ("failed stopping unresponsive HTTP server", 3);
- }
- }
-
- if($run{'http'} && !$run{'https'} &&
- !responsive_http_server("http", $verbose, 0,
- protoport('http'))) {
- if(stopserver('http')) {
- return ("failed stopping unresponsive HTTP server", 3);
- }
- }
- if(!$run{'http'}) {
- ($serr, $pid, $pid2, $PORT{'http'}) =
- runhttpserver("http", $verbose, 0);
- if($pid <= 0) {
- return ("failed starting HTTP server", $serr);
- }
- logmsg sprintf("* pid http => %d %d\n", $pid, $pid2) if($verbose);
- $run{'http'}="$pid $pid2";
- }
- if(!$run{'https'}) {
- ($serr, $pid, $pid2, $PORT{'https'}) =
- runhttpsserver($verbose, "https", "", $certfile);
- if($pid <= 0) {
- return ("failed starting HTTPS server (stunnel)", $serr);
- }
- logmsg sprintf("* pid https => %d %d\n", $pid, $pid2)
- if($verbose);
- $run{'https'}="$pid $pid2";
- }
- }
- elsif($what eq "http/2") {
-
- if($run{'http/2'} &&
- !responsive_http_server("https", $verbose, 0, protoport('http2tls'))) {
- logmsg "* restarting unresponsive HTTP/2 server\n";
- if(stopserver('http/2')) {
- return ("failed stopping unresponsive HTTP/2 server", 3);
- }
-
- if($run{'http'} && stopserver('http')) {
- return ("failed stopping HTTP server", 3);
- }
- }
-
- if($run{'http'} && !$run{'http/2'} &&
- !responsive_http_server("http", $verbose, 0,
- protoport('http'))) {
- if(stopserver('http')) {
- return ("failed stopping unresponsive HTTP server", 3);
- }
- }
- if(!$run{'http'}) {
- ($serr, $pid, $pid2, $PORT{'http'}) =
- runhttpserver("http", $verbose, 0);
- if($pid <= 0) {
- return ("failed starting HTTP server", $serr);
- }
- logmsg sprintf("* pid http => %d %d\n", $pid, $pid2) if($verbose);
- $run{'http'}="$pid $pid2";
- }
- if(!$run{'http/2'}) {
- ($serr, $pid, $pid2, $PORT{"http2"}, $PORT{"http2tls"}) =
- runhttp2server($verbose);
- if($pid <= 0) {
- return ("failed starting HTTP/2 server", $serr);
- }
- logmsg sprintf ("* pid http/2 => %d %d\n", $pid, $pid2)
- if($verbose);
- $run{'http/2'}="$pid $pid2";
- }
- }
- elsif($what eq "http/3") {
-
- if($run{'http/3'} &&
- !responsive_http_server("https", $verbose, 0, protoport('http3'), 1)) {
- logmsg "* restarting unresponsive HTTP/3 server\n";
- if(stopserver('http/3')) {
- return ("failed stopping unresponsive HTTP/3 server", 3);
- }
-
- if($run{'http'} && stopserver('http')) {
- return ("failed stopping HTTP server", 3);
- }
- }
-
- if($run{'http'} && !$run{'http/3'} &&
- !responsive_http_server("http", $verbose, 0,
- protoport('http'))) {
- if(stopserver('http')) {
- return ("failed stopping unresponsive HTTP server", 3);
- }
- }
- if(!$run{'http'}) {
- ($serr, $pid, $pid2, $PORT{'http'}) =
- runhttpserver("http", $verbose, 0);
- if($pid <= 0) {
- return ("failed starting HTTP server", $serr);
- }
- logmsg sprintf("* pid http => %d %d\n", $pid, $pid2) if($verbose);
- $run{'http'}="$pid $pid2";
- }
- if(!$run{'http/3'}) {
- ($serr, $pid, $pid2, $PORT{"http3"}) = runhttp3server($verbose);
- if($pid <= 0) {
- return ("failed starting HTTP/3 server", $serr);
- }
- logmsg sprintf ("* pid http/3 => %d %d\n", $pid, $pid2)
- if($verbose);
- $run{'http/3'}="$pid $pid2";
- }
- }
- elsif($what eq "gophers") {
- if(!$stunnel) {
-
- return ("no stunnel", 4);
- }
- if($runcert{'gophers'} && ($runcert{'gophers'} ne $certfile)) {
-
- if(stopserver('gophers')) {
- return ("failed stopping GOPHERS server with different cert", 3);
- }
- }
- if($run{'gopher'} &&
- !responsive_http_server("gopher", $verbose, 0,
- protoport('gopher'))) {
- if(stopserver('gopher')) {
- return ("failed stopping unresponsive GOPHER server", 3);
- }
- }
- if(!$run{'gopher'}) {
- my $port;
- ($serr, $pid, $pid2, $port) =
- runhttpserver("gopher", $verbose, 0);
- $PORT{'gopher'} = $port;
- if($pid <= 0) {
- return ("failed starting GOPHER server", $serr);
- }
- logmsg sprintf("* pid gopher => %d %d\n", $pid, $pid2) if($verbose);
- logmsg "GOPHERPORT => $port\n" if($verbose);
- $run{'gopher'}="$pid $pid2";
- }
- if(!$run{'gophers'}) {
- my $port;
- ($serr, $pid, $pid2, $port) =
- runhttpsserver($verbose, "gophers", "", $certfile);
- $PORT{'gophers'} = $port;
- if($pid <= 0) {
- return ("failed starting GOPHERS server (stunnel)", $serr);
- }
- logmsg sprintf("* pid gophers => %d %d\n", $pid, $pid2)
- if($verbose);
- logmsg "GOPHERSPORT => $port\n" if($verbose);
- $run{'gophers'}="$pid $pid2";
- }
- }
- elsif($what eq "https-proxy") {
- if(!$stunnel) {
-
- return ("no stunnel", 4);
- }
- if($runcert{'https-proxy'} &&
- ($runcert{'https-proxy'} ne $certfile)) {
-
- if(stopserver('https-proxy')) {
- return ("failed stopping HTTPS-proxy with different cert", 3);
- }
- }
-
-
- my ($f, $e) = startservers("http-proxy");
- if($f) {
- return ($f, $e);
- }
- if(!$run{'https-proxy'}) {
- ($serr, $pid, $pid2, $PORT{"httpsproxy"}) =
- runhttpsserver($verbose, "https", "proxy", $certfile);
- if($pid <= 0) {
- return ("failed starting HTTPS-proxy (stunnel)", $serr);
- }
- logmsg sprintf("* pid https-proxy => %d %d\n", $pid, $pid2)
- if($verbose);
- $run{'https-proxy'}="$pid $pid2";
- }
- }
- elsif($what eq "httptls") {
- if(!$httptlssrv) {
-
- return ("no gnutls-serv (with SRP support)", 4);
- }
- if($run{'httptls'} &&
- !responsive_httptls_server($verbose, "IPv4")) {
- if(stopserver('httptls')) {
- return ("failed stopping unresponsive HTTPTLS server", 3);
- }
- }
- if(!$run{'httptls'}) {
- ($serr, $pid, $pid2, $PORT{'httptls'}) =
- runhttptlsserver($verbose, "IPv4");
- if($pid <= 0) {
- return ("failed starting HTTPTLS server (gnutls-serv)", $serr);
- }
- logmsg sprintf("* pid httptls => %d %d\n", $pid, $pid2)
- if($verbose);
- $run{'httptls'}="$pid $pid2";
- }
- }
- elsif($what eq "httptls-ipv6") {
- if(!$httptlssrv) {
-
- return ("no gnutls-serv", 4);
- }
- if($run{'httptls-ipv6'} &&
- !responsive_httptls_server($verbose, "ipv6")) {
- if(stopserver('httptls-ipv6')) {
- return ("failed stopping unresponsive HTTPTLS-IPv6 server", 3);
- }
- }
- if(!$run{'httptls-ipv6'}) {
- ($serr, $pid, $pid2, $PORT{"httptls6"}) =
- runhttptlsserver($verbose, "ipv6");
- if($pid <= 0) {
- return ("failed starting HTTPTLS-IPv6 server (gnutls-serv)", $serr);
- }
- logmsg sprintf("* pid httptls-ipv6 => %d %d\n", $pid, $pid2)
- if($verbose);
- $run{'httptls-ipv6'}="$pid $pid2";
- }
- }
- elsif($what eq "tftp") {
- if($run{'tftp'} &&
- !responsive_tftp_server("", $verbose)) {
- if(stopserver('tftp')) {
- return ("failed stopping unresponsive TFTP server", 3);
- }
- }
- if(!$run{'tftp'}) {
- ($serr, $pid, $pid2, $PORT{'tftp'}) =
- runtftpserver("", $verbose);
- if($pid <= 0) {
- return ("failed starting TFTP server", $serr);
- }
- logmsg sprintf("* pid tftp => %d %d\n", $pid, $pid2) if($verbose);
- $run{'tftp'}="$pid $pid2";
- }
- }
- elsif($what eq "tftp-ipv6") {
- if($run{'tftp-ipv6'} &&
- !responsive_tftp_server("", $verbose, "ipv6")) {
- if(stopserver('tftp-ipv6')) {
- return ("failed stopping unresponsive TFTP-IPv6 server", 3);
- }
- }
- if(!$run{'tftp-ipv6'}) {
- ($serr, $pid, $pid2, $PORT{'tftp6'}) =
- runtftpserver("", $verbose, "ipv6");
- if($pid <= 0) {
- return ("failed starting TFTP-IPv6 server", $serr);
- }
- logmsg sprintf("* pid tftp-ipv6 => %d %d\n", $pid, $pid2) if($verbose);
- $run{'tftp-ipv6'}="$pid $pid2";
- }
- }
- elsif($what eq "sftp" || $what eq "scp") {
- if(!$run{'ssh'}) {
- ($serr, $pid, $pid2, $PORT{'ssh'}) = runsshserver("", $verbose);
- if($pid <= 0) {
- return ("failed starting SSH server", $serr);
- }
- logmsg sprintf("* pid ssh => %d %d\n", $pid, $pid2) if($verbose);
- $run{'ssh'}="$pid $pid2";
- }
- }
- elsif($what eq "socks4" || $what eq "socks5" ) {
- if(!$run{'socks'}) {
- ($serr, $pid, $pid2, $PORT{"socks"}) = runsocksserver("", $verbose);
- if($pid <= 0) {
- return ("failed starting socks server", $serr);
- }
- logmsg sprintf("* pid socks => %d %d\n", $pid, $pid2) if($verbose);
- $run{'socks'}="$pid $pid2";
- }
- }
- elsif($what eq "socks5unix") {
- if(!$run{'socks5unix'}) {
- ($serr, $pid, $pid2) = runsocksserver("2", $verbose, "", "unix");
- if($pid <= 0) {
- return ("failed starting socks5unix server", $serr);
- }
- logmsg sprintf("* pid socks5unix => %d %d\n", $pid, $pid2) if($verbose);
- $run{'socks5unix'}="$pid $pid2";
- }
- }
- elsif($what eq "mqtt" ) {
- if($run{'mqtt'} &&
- !responsive_mqtt_server("mqtt", "", $verbose)) {
- if(stopserver('mqtt')) {
- return ("failed stopping unresponsive MQTT server", 3);
- }
- }
- if(!$run{'mqtt'}) {
- ($serr, $pid, $pid2, $PORT{"mqtt"}) = runmqttserver("", $verbose);
- if($pid <= 0) {
- return ("failed starting mqtt server", $serr);
- }
- logmsg sprintf("* pid mqtt => %d %d\n", $pid, $pid2) if($verbose);
- $run{'mqtt'}="$pid $pid2";
- }
- }
- elsif($what eq "http-unix") {
- if($run{'http-unix'} &&
- !responsive_http_server("http", $verbose, "unix", $HTTPUNIXPATH)) {
- if(stopserver('http-unix')) {
- return ("failed stopping unresponsive HTTP-unix server", 3);
- }
- }
- if(!$run{'http-unix'}) {
- my $unused;
- ($serr, $pid, $pid2, $unused) =
- runhttpserver("http", $verbose, "unix", $HTTPUNIXPATH);
- if($pid <= 0) {
- return ("failed starting HTTP-unix server", $serr);
- }
- logmsg sprintf("* pid http-unix => %d %d\n", $pid, $pid2)
- if($verbose);
- $run{'http-unix'}="$pid $pid2";
- }
- }
- elsif($what eq "dict") {
- if(!$run{'dict'}) {
- ($serr, $pid, $pid2, $PORT{"dict"}) = rundictserver($verbose, "");
- if($pid <= 0) {
- return ("failed starting DICT server", $serr);
- }
- logmsg sprintf ("* pid DICT => %d %d\n", $pid, $pid2)
- if($verbose);
- $run{'dict'}="$pid $pid2";
- }
- }
- elsif($what eq "smb") {
- if(!$run{'smb'}) {
- ($serr, $pid, $pid2, $PORT{"smb"}) = runsmbserver($verbose, "");
- if($pid <= 0) {
- return ("failed starting SMB server", $serr);
- }
- logmsg sprintf ("* pid SMB => %d %d\n", $pid, $pid2)
- if($verbose);
- $run{'smb'}="$pid $pid2";
- }
- }
- elsif($what eq "telnet") {
- if(!$run{'telnet'}) {
- ($serr, $pid, $pid2, $PORT{"telnet"}) =
- runnegtelnetserver($verbose, "");
- if($pid <= 0) {
- return ("failed starting neg TELNET server", $serr);
- }
- logmsg sprintf ("* pid neg TELNET => %d %d\n", $pid, $pid2)
- if($verbose);
- $run{'telnet'}="$pid $pid2";
- }
- }
- elsif($what eq "none") {
- logmsg "* starts no server\n" if ($verbose);
- }
- else {
- warn "we don't support a server for $what";
- return ("no server for $what", 4);
- }
- }
- return ("", 0);
- }
- sub stopservers {
- my $verb = $_[0];
-
-
-
- killallsockfilters("$LOGDIR/$PIDDIR", $verb);
-
-
-
- my $pidlist;
- foreach my $server (keys %run) {
- if($run{$server}) {
- if($verb) {
- my $prev = 0;
- my $pids = $run{$server};
- foreach my $pid (split(' ', $pids)) {
- if($pid != $prev) {
- logmsg sprintf("* kill pid for %s => %d\n",
- $server, $pid);
- $prev = $pid;
- }
- }
- }
- $pidlist .= "$run{$server} ";
- $run{$server} = 0;
- }
- $runcert{$server} = 0 if($runcert{$server});
- }
- killpid($verb, $pidlist);
-
-
-
- my $result = 0;
- foreach my $server (keys %serverpidfile) {
- my $pidfile = $serverpidfile{$server};
- my $pid = processexists($pidfile);
- if($pid > 0) {
- if($err_unexpected) {
- logmsg "ERROR: ";
- $result = -1;
- }
- else {
- logmsg "Warning: ";
- }
- logmsg "$server server unexpectedly alive\n";
- killpid($verb, $pid);
- }
- unlink($pidfile) if(-f $pidfile);
- }
- return $result;
- }
- sub subvariables {
- my ($thing, $testnum, $prefix) = @_;
- my $port;
- if(!$prefix) {
- $prefix = "%";
- }
- # test server ports
- # Substitutes variables like %HTTPPORT and %SMTP6PORT with the server ports
- foreach my $proto ('DICT',
- 'FTP', 'FTP6', 'FTPS',
- 'GOPHER', 'GOPHER6', 'GOPHERS',
- 'HTTP', 'HTTP6', 'HTTPS',
- 'HTTPSPROXY', 'HTTPTLS', 'HTTPTLS6',
- 'HTTP2', 'HTTP2TLS',
- 'HTTP3',
- 'IMAP', 'IMAP6', 'IMAPS',
- 'MQTT',
- 'NOLISTEN',
- 'POP3', 'POP36', 'POP3S',
- 'RTSP', 'RTSP6',
- 'SMB', 'SMBS',
- 'SMTP', 'SMTP6', 'SMTPS',
- 'SOCKS',
- 'SSH',
- 'TELNET',
- 'TFTP', 'TFTP6') {
- $port = protoport(lc $proto);
- $$thing =~ s/${prefix}(?:$proto)PORT/$port/g;
- }
- # Special case: for PROXYPORT substitution, use httpproxy.
- $port = protoport('httpproxy');
- $$thing =~ s/${prefix}PROXYPORT/$port/g;
- # server Unix domain socket paths
- $$thing =~ s/${prefix}HTTPUNIXPATH/$HTTPUNIXPATH/g;
- $$thing =~ s/${prefix}SOCKSUNIXPATH/$SOCKSUNIXPATH/g;
- # client IP addresses
- my $nb = $CLIENT6IP;
- $nb =~ s/^\[(.*)\]/$1/; # trim off the brackets
- $$thing =~ s/${prefix}CLIENT6IP-NB/$nb/g;
- $$thing =~ s/${prefix}CLIENT6IP/$CLIENT6IP/g;
- $$thing =~ s/${prefix}CLIENTIP/$CLIENTIP/g;
- # server IP addresses
- $$thing =~ s/${prefix}HOST6IP/$HOST6IP/g;
- $$thing =~ s/${prefix}HOSTIP/$HOSTIP/g;
- # misc
- $$thing =~ s/${prefix}PERL/$perlcmd/g;
- $$thing =~ s/${prefix}CURL/$CURL/g;
- $$thing =~ s/${prefix}LOGDIR/$LOGDIR/g;
- $$thing =~ s/${prefix}PWD/$pwd/g;
- $$thing =~ s/${prefix}POSIX_PWD/$posix_pwd/g;
- $$thing =~ s/${prefix}VERSION/$CURLVERSION/g;
- $$thing =~ s/${prefix}VERNUM/$CURLVERNUM/g;
- $$thing =~ s/${prefix}DATE/$DATE/g;
- $$thing =~ s/${prefix}TESTNUMBER/$testnum/g;
- # POSIX/MSYS/Cygwin curl needs: file://localhost/d/path/to
- # Windows native curl needs: file://localhost/D:/path/to
- my $file_pwd = $pwd;
- if($file_pwd !~ /^\//) {
- $file_pwd = "/$file_pwd";
- }
- my $ssh_pwd = $posix_pwd;
- # this only works after the SSH server has been started
- # TODO: call sshversioninfo early and store $sshdid so this substitution
- # always works
- if ($sshdid && $sshdid =~ /OpenSSH-Windows/) {
- $ssh_pwd = $file_pwd;
- }
- $$thing =~ s/${prefix}FILE_PWD/$file_pwd/g;
- $$thing =~ s/${prefix}SSH_PWD/$ssh_pwd/g;
- $$thing =~ s/${prefix}SRCDIR/$srcdir/g;
- $$thing =~ s/${prefix}USER/$USER/g;
- $$thing =~ s/${prefix}DEV_NULL/$dev_null/g;
- $$thing =~ s/${prefix}SSHSRVMD5/$SSHSRVMD5/g;
- $$thing =~ s/${prefix}SSHSRVSHA256/$SSHSRVSHA256/g;
- # The purpose of FTPTIME2 is to provide times that can be
- # used for time-out tests and that would work on most hosts as these
- # adjust for the startup/check time for this particular host. We needed to
- # do this to make the test suite run better on very slow hosts.
- my $ftp2 = $ftpchecktime * 8;
- $$thing =~ s/${prefix}FTPTIME2/$ftp2/g;
- # HTTP2
- $$thing =~ s/${prefix}H2CVER/$h2cver/g;
- }
- sub localhttp {
- return $HOSTIP eq "127.0.0.1";
- }
- 1;
|