123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902903904905906907908909910911912913914915916917918919920921922923924925926927928929930931932933934935936937938939940941942943944945946947948949950951952953954955956957958959960961962963964965966967968969970971972973974975976977978979980981982983984985986987988989990991992993994995996997998999100010011002100310041005100610071008100910101011101210131014101510161017101810191020102110221023102410251026102710281029103010311032103310341035103610371038103910401041104210431044104510461047104810491050105110521053105410551056105710581059106010611062106310641065106610671068106910701071107210731074107510761077107810791080108110821083108410851086 |
- /***************************************************************************
- * _ _ ____ _
- * Project ___| | | | _ \| |
- * / __| | | | |_) | |
- * | (__| |_| | _ <| |___
- * \___|\___/|_| \_\_____|
- *
- * Copyright (C) Daniel Stenberg, <daniel@haxx.se>, et al.
- *
- * This software is licensed as described in the file COPYING, which
- * you should have received as part of this distribution. The terms
- * are also available at https://curl.se/docs/copyright.html.
- *
- * You may opt to use, copy, modify, merge, publish, distribute and/or sell
- * copies of the Software, and permit persons to whom the Software is
- * furnished to do so, under the terms of the COPYING file.
- *
- * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
- * KIND, either express or implied.
- *
- * SPDX-License-Identifier: curl
- *
- ***************************************************************************/
- #include "curl_setup.h"
- #include "urldata.h"
- #include <curl/curl.h>
- #include <stddef.h>
- #ifdef HAVE_LIBZ
- #include <zlib.h>
- #endif
- #ifdef HAVE_BROTLI
- #if defined(__GNUC__)
- /* Ignore -Wvla warnings in brotli headers */
- #pragma GCC diagnostic push
- #pragma GCC diagnostic ignored "-Wvla"
- #endif
- #include <brotli/decode.h>
- #if defined(__GNUC__)
- #pragma GCC diagnostic pop
- #endif
- #endif
- #ifdef HAVE_ZSTD
- #include <zstd.h>
- #endif
- #include "sendf.h"
- #include "http.h"
- #include "content_encoding.h"
- #include "strdup.h"
- #include "strcase.h"
- /* The last 3 #include files should be in this order */
- #include "curl_printf.h"
- #include "curl_memory.h"
- #include "memdebug.h"
- #define CONTENT_ENCODING_DEFAULT "identity"
- #ifndef CURL_DISABLE_HTTP
- /* allow no more than 5 "chained" compression steps */
- #define MAX_ENCODE_STACK 5
- #define DSIZ CURL_MAX_WRITE_SIZE /* buffer size for decompressed data */
- #ifdef HAVE_LIBZ
- /* Comment this out if zlib is always going to be at least ver. 1.2.0.4
- (doing so will reduce code size slightly). */
- #define OLD_ZLIB_SUPPORT 1
- #define GZIP_MAGIC_0 0x1f
- #define GZIP_MAGIC_1 0x8b
- /* gzip flag byte */
- #define ASCII_FLAG 0x01 /* bit 0 set: file probably ascii text */
- #define HEAD_CRC 0x02 /* bit 1 set: header CRC present */
- #define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */
- #define ORIG_NAME 0x08 /* bit 3 set: original filename present */
- #define COMMENT 0x10 /* bit 4 set: file comment present */
- #define RESERVED 0xE0 /* bits 5..7: reserved */
- typedef enum {
- ZLIB_UNINIT, /* uninitialized */
- ZLIB_INIT, /* initialized */
- ZLIB_INFLATING, /* inflating started. */
- ZLIB_EXTERNAL_TRAILER, /* reading external trailer */
- ZLIB_GZIP_HEADER, /* reading gzip header */
- ZLIB_GZIP_INFLATING, /* inflating gzip stream */
- ZLIB_INIT_GZIP /* initialized in transparent gzip mode */
- } zlibInitState;
- /* Deflate and gzip writer. */
- struct zlib_writer {
- struct Curl_cwriter super;
- zlibInitState zlib_init; /* zlib init state */
- uInt trailerlen; /* Remaining trailer byte count. */
- z_stream z; /* State structure for zlib. */
- };
- static voidpf
- zalloc_cb(voidpf opaque, unsigned int items, unsigned int size)
- {
- (void) opaque;
- /* not a typo, keep it calloc() */
- return (voidpf) calloc(items, size);
- }
- static void
- zfree_cb(voidpf opaque, voidpf ptr)
- {
- (void) opaque;
- free(ptr);
- }
- static CURLcode
- process_zlib_error(struct Curl_easy *data, z_stream *z)
- {
- if(z->msg)
- failf(data, "Error while processing content unencoding: %s",
- z->msg);
- else
- failf(data, "Error while processing content unencoding: "
- "Unknown failure within decompression software.");
- return CURLE_BAD_CONTENT_ENCODING;
- }
- static CURLcode
- exit_zlib(struct Curl_easy *data,
- z_stream *z, zlibInitState *zlib_init, CURLcode result)
- {
- if(*zlib_init == ZLIB_GZIP_HEADER)
- Curl_safefree(z->next_in);
- if(*zlib_init != ZLIB_UNINIT) {
- if(inflateEnd(z) != Z_OK && result == CURLE_OK)
- result = process_zlib_error(data, z);
- *zlib_init = ZLIB_UNINIT;
- }
- return result;
- }
- static CURLcode process_trailer(struct Curl_easy *data,
- struct zlib_writer *zp)
- {
- z_stream *z = &zp->z;
- CURLcode result = CURLE_OK;
- uInt len = z->avail_in < zp->trailerlen? z->avail_in: zp->trailerlen;
- /* Consume expected trailer bytes. Terminate stream if exhausted.
- Issue an error if unexpected bytes follow. */
- zp->trailerlen -= len;
- z->avail_in -= len;
- z->next_in += len;
- if(z->avail_in)
- result = CURLE_WRITE_ERROR;
- if(result || !zp->trailerlen)
- result = exit_zlib(data, z, &zp->zlib_init, result);
- else {
- /* Only occurs for gzip with zlib < 1.2.0.4 or raw deflate. */
- zp->zlib_init = ZLIB_EXTERNAL_TRAILER;
- }
- return result;
- }
- static CURLcode inflate_stream(struct Curl_easy *data,
- struct Curl_cwriter *writer, int type,
- zlibInitState started)
- {
- struct zlib_writer *zp = (struct zlib_writer *) writer;
- z_stream *z = &zp->z; /* zlib state structure */
- uInt nread = z->avail_in;
- Bytef *orig_in = z->next_in;
- bool done = FALSE;
- CURLcode result = CURLE_OK; /* Curl_client_write status */
- char *decomp; /* Put the decompressed data here. */
- /* Check state. */
- if(zp->zlib_init != ZLIB_INIT &&
- zp->zlib_init != ZLIB_INFLATING &&
- zp->zlib_init != ZLIB_INIT_GZIP &&
- zp->zlib_init != ZLIB_GZIP_INFLATING)
- return exit_zlib(data, z, &zp->zlib_init, CURLE_WRITE_ERROR);
- /* Dynamically allocate a buffer for decompression because it is uncommonly
- large to hold on the stack */
- decomp = malloc(DSIZ);
- if(!decomp)
- return exit_zlib(data, z, &zp->zlib_init, CURLE_OUT_OF_MEMORY);
- /* because the buffer size is fixed, iteratively decompress and transfer to
- the client via next_write function. */
- while(!done) {
- int status; /* zlib status */
- done = TRUE;
- /* (re)set buffer for decompressed output for every iteration */
- z->next_out = (Bytef *) decomp;
- z->avail_out = DSIZ;
- #ifdef Z_BLOCK
- /* Z_BLOCK is only available in zlib ver. >= 1.2.0.5 */
- status = inflate(z, Z_BLOCK);
- #else
- /* fallback for zlib ver. < 1.2.0.5 */
- status = inflate(z, Z_SYNC_FLUSH);
- #endif
- /* Flush output data if some. */
- if(z->avail_out != DSIZ) {
- if(status == Z_OK || status == Z_STREAM_END) {
- zp->zlib_init = started; /* Data started. */
- result = Curl_cwriter_write(data, writer->next, type, decomp,
- DSIZ - z->avail_out);
- if(result) {
- exit_zlib(data, z, &zp->zlib_init, result);
- break;
- }
- }
- }
- /* Dispatch by inflate() status. */
- switch(status) {
- case Z_OK:
- /* Always loop: there may be unflushed latched data in zlib state. */
- done = FALSE;
- break;
- case Z_BUF_ERROR:
- /* No more data to flush: just exit loop. */
- break;
- case Z_STREAM_END:
- result = process_trailer(data, zp);
- break;
- case Z_DATA_ERROR:
- /* some servers seem to not generate zlib headers, so this is an attempt
- to fix and continue anyway */
- if(zp->zlib_init == ZLIB_INIT) {
- /* Do not use inflateReset2(): only available since zlib 1.2.3.4. */
- (void) inflateEnd(z); /* do not care about the return code */
- if(inflateInit2(z, -MAX_WBITS) == Z_OK) {
- z->next_in = orig_in;
- z->avail_in = nread;
- zp->zlib_init = ZLIB_INFLATING;
- zp->trailerlen = 4; /* Tolerate up to 4 unknown trailer bytes. */
- done = FALSE;
- break;
- }
- zp->zlib_init = ZLIB_UNINIT; /* inflateEnd() already called. */
- }
- result = exit_zlib(data, z, &zp->zlib_init, process_zlib_error(data, z));
- break;
- default:
- result = exit_zlib(data, z, &zp->zlib_init, process_zlib_error(data, z));
- break;
- }
- }
- free(decomp);
- /* We are about to leave this call so the `nread' data bytes will not be seen
- again. If we are in a state that would wrongly allow restart in raw mode
- at the next call, assume output has already started. */
- if(nread && zp->zlib_init == ZLIB_INIT)
- zp->zlib_init = started; /* Cannot restart anymore. */
- return result;
- }
- /* Deflate handler. */
- static CURLcode deflate_do_init(struct Curl_easy *data,
- struct Curl_cwriter *writer)
- {
- struct zlib_writer *zp = (struct zlib_writer *) writer;
- z_stream *z = &zp->z; /* zlib state structure */
- /* Initialize zlib */
- z->zalloc = (alloc_func) zalloc_cb;
- z->zfree = (free_func) zfree_cb;
- if(inflateInit(z) != Z_OK)
- return process_zlib_error(data, z);
- zp->zlib_init = ZLIB_INIT;
- return CURLE_OK;
- }
- static CURLcode deflate_do_write(struct Curl_easy *data,
- struct Curl_cwriter *writer, int type,
- const char *buf, size_t nbytes)
- {
- struct zlib_writer *zp = (struct zlib_writer *) writer;
- z_stream *z = &zp->z; /* zlib state structure */
- if(!(type & CLIENTWRITE_BODY) || !nbytes)
- return Curl_cwriter_write(data, writer->next, type, buf, nbytes);
- /* Set the compressed input when this function is called */
- z->next_in = (Bytef *) buf;
- z->avail_in = (uInt) nbytes;
- if(zp->zlib_init == ZLIB_EXTERNAL_TRAILER)
- return process_trailer(data, zp);
- /* Now uncompress the data */
- return inflate_stream(data, writer, type, ZLIB_INFLATING);
- }
- static void deflate_do_close(struct Curl_easy *data,
- struct Curl_cwriter *writer)
- {
- struct zlib_writer *zp = (struct zlib_writer *) writer;
- z_stream *z = &zp->z; /* zlib state structure */
- exit_zlib(data, z, &zp->zlib_init, CURLE_OK);
- }
- static const struct Curl_cwtype deflate_encoding = {
- "deflate",
- NULL,
- deflate_do_init,
- deflate_do_write,
- deflate_do_close,
- sizeof(struct zlib_writer)
- };
- /* Gzip handler. */
- static CURLcode gzip_do_init(struct Curl_easy *data,
- struct Curl_cwriter *writer)
- {
- struct zlib_writer *zp = (struct zlib_writer *) writer;
- z_stream *z = &zp->z; /* zlib state structure */
- /* Initialize zlib */
- z->zalloc = (alloc_func) zalloc_cb;
- z->zfree = (free_func) zfree_cb;
- if(strcmp(zlibVersion(), "1.2.0.4") >= 0) {
- /* zlib ver. >= 1.2.0.4 supports transparent gzip decompressing */
- if(inflateInit2(z, MAX_WBITS + 32) != Z_OK) {
- return process_zlib_error(data, z);
- }
- zp->zlib_init = ZLIB_INIT_GZIP; /* Transparent gzip decompress state */
- }
- else {
- /* we must parse the gzip header and trailer ourselves */
- if(inflateInit2(z, -MAX_WBITS) != Z_OK) {
- return process_zlib_error(data, z);
- }
- zp->trailerlen = 8; /* A CRC-32 and a 32-bit input size (RFC 1952, 2.2) */
- zp->zlib_init = ZLIB_INIT; /* Initial call state */
- }
- return CURLE_OK;
- }
- #ifdef OLD_ZLIB_SUPPORT
- /* Skip over the gzip header */
- typedef enum {
- GZIP_OK,
- GZIP_BAD,
- GZIP_UNDERFLOW
- } gzip_status;
- static gzip_status check_gzip_header(unsigned char const *data, ssize_t len,
- ssize_t *headerlen)
- {
- int method, flags;
- const ssize_t totallen = len;
- /* The shortest header is 10 bytes */
- if(len < 10)
- return GZIP_UNDERFLOW;
- if((data[0] != GZIP_MAGIC_0) || (data[1] != GZIP_MAGIC_1))
- return GZIP_BAD;
- method = data[2];
- flags = data[3];
- if(method != Z_DEFLATED || (flags & RESERVED) != 0) {
- /* cannot handle this compression method or unknown flag */
- return GZIP_BAD;
- }
- /* Skip over time, xflags, OS code and all previous bytes */
- len -= 10;
- data += 10;
- if(flags & EXTRA_FIELD) {
- ssize_t extra_len;
- if(len < 2)
- return GZIP_UNDERFLOW;
- extra_len = (data[1] << 8) | data[0];
- if(len < (extra_len + 2))
- return GZIP_UNDERFLOW;
- len -= (extra_len + 2);
- data += (extra_len + 2);
- }
- if(flags & ORIG_NAME) {
- /* Skip over NUL-terminated filename */
- while(len && *data) {
- --len;
- ++data;
- }
- if(!len || *data)
- return GZIP_UNDERFLOW;
- /* Skip over the NUL */
- --len;
- ++data;
- }
- if(flags & COMMENT) {
- /* Skip over NUL-terminated comment */
- while(len && *data) {
- --len;
- ++data;
- }
- if(!len || *data)
- return GZIP_UNDERFLOW;
- /* Skip over the NUL */
- --len;
- }
- if(flags & HEAD_CRC) {
- if(len < 2)
- return GZIP_UNDERFLOW;
- len -= 2;
- }
- *headerlen = totallen - len;
- return GZIP_OK;
- }
- #endif
- static CURLcode gzip_do_write(struct Curl_easy *data,
- struct Curl_cwriter *writer, int type,
- const char *buf, size_t nbytes)
- {
- struct zlib_writer *zp = (struct zlib_writer *) writer;
- z_stream *z = &zp->z; /* zlib state structure */
- if(!(type & CLIENTWRITE_BODY) || !nbytes)
- return Curl_cwriter_write(data, writer->next, type, buf, nbytes);
- if(zp->zlib_init == ZLIB_INIT_GZIP) {
- /* Let zlib handle the gzip decompression entirely */
- z->next_in = (Bytef *) buf;
- z->avail_in = (uInt) nbytes;
- /* Now uncompress the data */
- return inflate_stream(data, writer, type, ZLIB_INIT_GZIP);
- }
- #ifndef OLD_ZLIB_SUPPORT
- /* Support for old zlib versions is compiled away and we are running with
- an old version, so return an error. */
- return exit_zlib(data, z, &zp->zlib_init, CURLE_WRITE_ERROR);
- #else
- /* This next mess is to get around the potential case where there is not
- * enough data passed in to skip over the gzip header. If that happens, we
- * malloc a block and copy what we have then wait for the next call. If
- * there still is not enough (this is definitely a worst-case scenario), we
- * make the block bigger, copy the next part in and keep waiting.
- *
- * This is only required with zlib versions < 1.2.0.4 as newer versions
- * can handle the gzip header themselves.
- */
- switch(zp->zlib_init) {
- /* Skip over gzip header? */
- case ZLIB_INIT:
- {
- /* Initial call state */
- ssize_t hlen;
- switch(check_gzip_header((unsigned char *) buf, nbytes, &hlen)) {
- case GZIP_OK:
- z->next_in = (Bytef *) buf + hlen;
- z->avail_in = (uInt) (nbytes - hlen);
- zp->zlib_init = ZLIB_GZIP_INFLATING; /* Inflating stream state */
- break;
- case GZIP_UNDERFLOW:
- /* We need more data so we can find the end of the gzip header. it is
- * possible that the memory block we malloc here will never be freed if
- * the transfer abruptly aborts after this point. Since it is unlikely
- * that circumstances will be right for this code path to be followed in
- * the first place, and it is even more unlikely for a transfer to fail
- * immediately afterwards, it should seldom be a problem.
- */
- z->avail_in = (uInt) nbytes;
- z->next_in = malloc(z->avail_in);
- if(!z->next_in) {
- return exit_zlib(data, z, &zp->zlib_init, CURLE_OUT_OF_MEMORY);
- }
- memcpy(z->next_in, buf, z->avail_in);
- zp->zlib_init = ZLIB_GZIP_HEADER; /* Need more gzip header data state */
- /* We do not have any data to inflate yet */
- return CURLE_OK;
- case GZIP_BAD:
- default:
- return exit_zlib(data, z, &zp->zlib_init, process_zlib_error(data, z));
- }
- }
- break;
- case ZLIB_GZIP_HEADER:
- {
- /* Need more gzip header data state */
- ssize_t hlen;
- z->avail_in += (uInt) nbytes;
- z->next_in = Curl_saferealloc(z->next_in, z->avail_in);
- if(!z->next_in) {
- return exit_zlib(data, z, &zp->zlib_init, CURLE_OUT_OF_MEMORY);
- }
- /* Append the new block of data to the previous one */
- memcpy(z->next_in + z->avail_in - nbytes, buf, nbytes);
- switch(check_gzip_header(z->next_in, (ssize_t)z->avail_in, &hlen)) {
- case GZIP_OK:
- /* This is the zlib stream data */
- free(z->next_in);
- /* Do not point into the malloced block since we just freed it */
- z->next_in = (Bytef *) buf + hlen + nbytes - z->avail_in;
- z->avail_in = z->avail_in - (uInt)hlen;
- zp->zlib_init = ZLIB_GZIP_INFLATING; /* Inflating stream state */
- break;
- case GZIP_UNDERFLOW:
- /* We still do not have any data to inflate! */
- return CURLE_OK;
- case GZIP_BAD:
- default:
- return exit_zlib(data, z, &zp->zlib_init, process_zlib_error(data, z));
- }
- }
- break;
- case ZLIB_EXTERNAL_TRAILER:
- z->next_in = (Bytef *) buf;
- z->avail_in = (uInt) nbytes;
- return process_trailer(data, zp);
- case ZLIB_GZIP_INFLATING:
- default:
- /* Inflating stream state */
- z->next_in = (Bytef *) buf;
- z->avail_in = (uInt) nbytes;
- break;
- }
- if(z->avail_in == 0) {
- /* We do not have any data to inflate; wait until next time */
- return CURLE_OK;
- }
- /* We have parsed the header, now uncompress the data */
- return inflate_stream(data, writer, type, ZLIB_GZIP_INFLATING);
- #endif
- }
- static void gzip_do_close(struct Curl_easy *data,
- struct Curl_cwriter *writer)
- {
- struct zlib_writer *zp = (struct zlib_writer *) writer;
- z_stream *z = &zp->z; /* zlib state structure */
- exit_zlib(data, z, &zp->zlib_init, CURLE_OK);
- }
- static const struct Curl_cwtype gzip_encoding = {
- "gzip",
- "x-gzip",
- gzip_do_init,
- gzip_do_write,
- gzip_do_close,
- sizeof(struct zlib_writer)
- };
- #endif /* HAVE_LIBZ */
- #ifdef HAVE_BROTLI
- /* Brotli writer. */
- struct brotli_writer {
- struct Curl_cwriter super;
- BrotliDecoderState *br; /* State structure for brotli. */
- };
- static CURLcode brotli_map_error(BrotliDecoderErrorCode be)
- {
- switch(be) {
- case BROTLI_DECODER_ERROR_FORMAT_EXUBERANT_NIBBLE:
- case BROTLI_DECODER_ERROR_FORMAT_EXUBERANT_META_NIBBLE:
- case BROTLI_DECODER_ERROR_FORMAT_SIMPLE_HUFFMAN_ALPHABET:
- case BROTLI_DECODER_ERROR_FORMAT_SIMPLE_HUFFMAN_SAME:
- case BROTLI_DECODER_ERROR_FORMAT_CL_SPACE:
- case BROTLI_DECODER_ERROR_FORMAT_HUFFMAN_SPACE:
- case BROTLI_DECODER_ERROR_FORMAT_CONTEXT_MAP_REPEAT:
- case BROTLI_DECODER_ERROR_FORMAT_BLOCK_LENGTH_1:
- case BROTLI_DECODER_ERROR_FORMAT_BLOCK_LENGTH_2:
- case BROTLI_DECODER_ERROR_FORMAT_TRANSFORM:
- case BROTLI_DECODER_ERROR_FORMAT_DICTIONARY:
- case BROTLI_DECODER_ERROR_FORMAT_WINDOW_BITS:
- case BROTLI_DECODER_ERROR_FORMAT_PADDING_1:
- case BROTLI_DECODER_ERROR_FORMAT_PADDING_2:
- #ifdef BROTLI_DECODER_ERROR_COMPOUND_DICTIONARY
- case BROTLI_DECODER_ERROR_COMPOUND_DICTIONARY:
- #endif
- #ifdef BROTLI_DECODER_ERROR_DICTIONARY_NOT_SET
- case BROTLI_DECODER_ERROR_DICTIONARY_NOT_SET:
- #endif
- case BROTLI_DECODER_ERROR_INVALID_ARGUMENTS:
- return CURLE_BAD_CONTENT_ENCODING;
- case BROTLI_DECODER_ERROR_ALLOC_CONTEXT_MODES:
- case BROTLI_DECODER_ERROR_ALLOC_TREE_GROUPS:
- case BROTLI_DECODER_ERROR_ALLOC_CONTEXT_MAP:
- case BROTLI_DECODER_ERROR_ALLOC_RING_BUFFER_1:
- case BROTLI_DECODER_ERROR_ALLOC_RING_BUFFER_2:
- case BROTLI_DECODER_ERROR_ALLOC_BLOCK_TYPE_TREES:
- return CURLE_OUT_OF_MEMORY;
- default:
- break;
- }
- return CURLE_WRITE_ERROR;
- }
- static CURLcode brotli_do_init(struct Curl_easy *data,
- struct Curl_cwriter *writer)
- {
- struct brotli_writer *bp = (struct brotli_writer *) writer;
- (void) data;
- bp->br = BrotliDecoderCreateInstance(NULL, NULL, NULL);
- return bp->br? CURLE_OK: CURLE_OUT_OF_MEMORY;
- }
- static CURLcode brotli_do_write(struct Curl_easy *data,
- struct Curl_cwriter *writer, int type,
- const char *buf, size_t nbytes)
- {
- struct brotli_writer *bp = (struct brotli_writer *) writer;
- const uint8_t *src = (const uint8_t *) buf;
- char *decomp;
- uint8_t *dst;
- size_t dstleft;
- CURLcode result = CURLE_OK;
- BrotliDecoderResult r = BROTLI_DECODER_RESULT_NEEDS_MORE_OUTPUT;
- if(!(type & CLIENTWRITE_BODY) || !nbytes)
- return Curl_cwriter_write(data, writer->next, type, buf, nbytes);
- if(!bp->br)
- return CURLE_WRITE_ERROR; /* Stream already ended. */
- decomp = malloc(DSIZ);
- if(!decomp)
- return CURLE_OUT_OF_MEMORY;
- while((nbytes || r == BROTLI_DECODER_RESULT_NEEDS_MORE_OUTPUT) &&
- result == CURLE_OK) {
- dst = (uint8_t *) decomp;
- dstleft = DSIZ;
- r = BrotliDecoderDecompressStream(bp->br,
- &nbytes, &src, &dstleft, &dst, NULL);
- result = Curl_cwriter_write(data, writer->next, type,
- decomp, DSIZ - dstleft);
- if(result)
- break;
- switch(r) {
- case BROTLI_DECODER_RESULT_NEEDS_MORE_OUTPUT:
- case BROTLI_DECODER_RESULT_NEEDS_MORE_INPUT:
- break;
- case BROTLI_DECODER_RESULT_SUCCESS:
- BrotliDecoderDestroyInstance(bp->br);
- bp->br = NULL;
- if(nbytes)
- result = CURLE_WRITE_ERROR;
- break;
- default:
- result = brotli_map_error(BrotliDecoderGetErrorCode(bp->br));
- break;
- }
- }
- free(decomp);
- return result;
- }
- static void brotli_do_close(struct Curl_easy *data,
- struct Curl_cwriter *writer)
- {
- struct brotli_writer *bp = (struct brotli_writer *) writer;
- (void) data;
- if(bp->br) {
- BrotliDecoderDestroyInstance(bp->br);
- bp->br = NULL;
- }
- }
- static const struct Curl_cwtype brotli_encoding = {
- "br",
- NULL,
- brotli_do_init,
- brotli_do_write,
- brotli_do_close,
- sizeof(struct brotli_writer)
- };
- #endif
- #ifdef HAVE_ZSTD
- /* Zstd writer. */
- struct zstd_writer {
- struct Curl_cwriter super;
- ZSTD_DStream *zds; /* State structure for zstd. */
- void *decomp;
- };
- static CURLcode zstd_do_init(struct Curl_easy *data,
- struct Curl_cwriter *writer)
- {
- struct zstd_writer *zp = (struct zstd_writer *) writer;
- (void)data;
- zp->zds = ZSTD_createDStream();
- zp->decomp = NULL;
- return zp->zds ? CURLE_OK : CURLE_OUT_OF_MEMORY;
- }
- static CURLcode zstd_do_write(struct Curl_easy *data,
- struct Curl_cwriter *writer, int type,
- const char *buf, size_t nbytes)
- {
- CURLcode result = CURLE_OK;
- struct zstd_writer *zp = (struct zstd_writer *) writer;
- ZSTD_inBuffer in;
- ZSTD_outBuffer out;
- size_t errorCode;
- if(!(type & CLIENTWRITE_BODY) || !nbytes)
- return Curl_cwriter_write(data, writer->next, type, buf, nbytes);
- if(!zp->decomp) {
- zp->decomp = malloc(DSIZ);
- if(!zp->decomp)
- return CURLE_OUT_OF_MEMORY;
- }
- in.pos = 0;
- in.src = buf;
- in.size = nbytes;
- for(;;) {
- out.pos = 0;
- out.dst = zp->decomp;
- out.size = DSIZ;
- errorCode = ZSTD_decompressStream(zp->zds, &out, &in);
- if(ZSTD_isError(errorCode)) {
- return CURLE_BAD_CONTENT_ENCODING;
- }
- if(out.pos > 0) {
- result = Curl_cwriter_write(data, writer->next, type,
- zp->decomp, out.pos);
- if(result)
- break;
- }
- if((in.pos == nbytes) && (out.pos < out.size))
- break;
- }
- return result;
- }
- static void zstd_do_close(struct Curl_easy *data,
- struct Curl_cwriter *writer)
- {
- struct zstd_writer *zp = (struct zstd_writer *) writer;
- (void)data;
- if(zp->decomp) {
- free(zp->decomp);
- zp->decomp = NULL;
- }
- if(zp->zds) {
- ZSTD_freeDStream(zp->zds);
- zp->zds = NULL;
- }
- }
- static const struct Curl_cwtype zstd_encoding = {
- "zstd",
- NULL,
- zstd_do_init,
- zstd_do_write,
- zstd_do_close,
- sizeof(struct zstd_writer)
- };
- #endif
- /* Identity handler. */
- static const struct Curl_cwtype identity_encoding = {
- "identity",
- "none",
- Curl_cwriter_def_init,
- Curl_cwriter_def_write,
- Curl_cwriter_def_close,
- sizeof(struct Curl_cwriter)
- };
- /* supported general content decoders. */
- static const struct Curl_cwtype * const general_unencoders[] = {
- &identity_encoding,
- #ifdef HAVE_LIBZ
- &deflate_encoding,
- &gzip_encoding,
- #endif
- #ifdef HAVE_BROTLI
- &brotli_encoding,
- #endif
- #ifdef HAVE_ZSTD
- &zstd_encoding,
- #endif
- NULL
- };
- /* supported content decoders only for transfer encodings */
- static const struct Curl_cwtype * const transfer_unencoders[] = {
- #ifndef CURL_DISABLE_HTTP
- &Curl_httpchunk_unencoder,
- #endif
- NULL
- };
- /* Provide a list of comma-separated names of supported encodings.
- */
- void Curl_all_content_encodings(char *buf, size_t blen)
- {
- size_t len = 0;
- const struct Curl_cwtype * const *cep;
- const struct Curl_cwtype *ce;
- DEBUGASSERT(buf);
- DEBUGASSERT(blen);
- buf[0] = 0;
- for(cep = general_unencoders; *cep; cep++) {
- ce = *cep;
- if(!strcasecompare(ce->name, CONTENT_ENCODING_DEFAULT))
- len += strlen(ce->name) + 2;
- }
- if(!len) {
- if(blen >= sizeof(CONTENT_ENCODING_DEFAULT))
- strcpy(buf, CONTENT_ENCODING_DEFAULT);
- }
- else if(blen > len) {
- char *p = buf;
- for(cep = general_unencoders; *cep; cep++) {
- ce = *cep;
- if(!strcasecompare(ce->name, CONTENT_ENCODING_DEFAULT)) {
- strcpy(p, ce->name);
- p += strlen(p);
- *p++ = ',';
- *p++ = ' ';
- }
- }
- p[-2] = '\0';
- }
- }
- /* Deferred error dummy writer. */
- static CURLcode error_do_init(struct Curl_easy *data,
- struct Curl_cwriter *writer)
- {
- (void)data;
- (void)writer;
- return CURLE_OK;
- }
- static CURLcode error_do_write(struct Curl_easy *data,
- struct Curl_cwriter *writer, int type,
- const char *buf, size_t nbytes)
- {
- char all[256];
- (void)Curl_all_content_encodings(all, sizeof(all));
- (void) writer;
- (void) buf;
- (void) nbytes;
- if(!(type & CLIENTWRITE_BODY) || !nbytes)
- return Curl_cwriter_write(data, writer->next, type, buf, nbytes);
- failf(data, "Unrecognized content encoding type. "
- "libcurl understands %s content encodings.", all);
- return CURLE_BAD_CONTENT_ENCODING;
- }
- static void error_do_close(struct Curl_easy *data,
- struct Curl_cwriter *writer)
- {
- (void) data;
- (void) writer;
- }
- static const struct Curl_cwtype error_writer = {
- "ce-error",
- NULL,
- error_do_init,
- error_do_write,
- error_do_close,
- sizeof(struct Curl_cwriter)
- };
- /* Find the content encoding by name. */
- static const struct Curl_cwtype *find_unencode_writer(const char *name,
- size_t len,
- Curl_cwriter_phase phase)
- {
- const struct Curl_cwtype * const *cep;
- if(phase == CURL_CW_TRANSFER_DECODE) {
- for(cep = transfer_unencoders; *cep; cep++) {
- const struct Curl_cwtype *ce = *cep;
- if((strncasecompare(name, ce->name, len) && !ce->name[len]) ||
- (ce->alias && strncasecompare(name, ce->alias, len)
- && !ce->alias[len]))
- return ce;
- }
- }
- /* look among the general decoders */
- for(cep = general_unencoders; *cep; cep++) {
- const struct Curl_cwtype *ce = *cep;
- if((strncasecompare(name, ce->name, len) && !ce->name[len]) ||
- (ce->alias && strncasecompare(name, ce->alias, len) && !ce->alias[len]))
- return ce;
- }
- return NULL;
- }
- /* Setup the unencoding stack from the Content-Encoding header value.
- * See RFC 7231 section 3.1.2.2. */
- CURLcode Curl_build_unencoding_stack(struct Curl_easy *data,
- const char *enclist, int is_transfer)
- {
- Curl_cwriter_phase phase = is_transfer?
- CURL_CW_TRANSFER_DECODE:CURL_CW_CONTENT_DECODE;
- CURLcode result;
- do {
- const char *name;
- size_t namelen;
- bool is_chunked = FALSE;
- /* Parse a single encoding name. */
- while(ISBLANK(*enclist) || *enclist == ',')
- enclist++;
- name = enclist;
- for(namelen = 0; *enclist && *enclist != ','; enclist++)
- if(!ISSPACE(*enclist))
- namelen = enclist - name + 1;
- if(namelen) {
- const struct Curl_cwtype *cwt;
- struct Curl_cwriter *writer;
- CURL_TRC_WRITE(data, "looking for %s decoder: %.*s",
- is_transfer? "transfer" : "content", (int)namelen, name);
- is_chunked = (is_transfer && (namelen == 7) &&
- strncasecompare(name, "chunked", 7));
- /* if we skip the decoding in this phase, do not look further.
- * Exception is "chunked" transfer-encoding which always must happen */
- if((is_transfer && !data->set.http_transfer_encoding && !is_chunked) ||
- (!is_transfer && data->set.http_ce_skip)) {
- /* not requested, ignore */
- CURL_TRC_WRITE(data, "decoder not requested, ignored: %.*s",
- (int)namelen, name);
- return CURLE_OK;
- }
- if(Curl_cwriter_count(data, phase) + 1 >= MAX_ENCODE_STACK) {
- failf(data, "Reject response due to more than %u content encodings",
- MAX_ENCODE_STACK);
- return CURLE_BAD_CONTENT_ENCODING;
- }
- cwt = find_unencode_writer(name, namelen, phase);
- if(cwt && is_chunked && Curl_cwriter_get_by_type(data, cwt)) {
- /* A 'chunked' transfer encoding has already been added.
- * Ignore duplicates. See #13451.
- * Also RFC 9112, ch. 6.1:
- * "A sender MUST NOT apply the chunked transfer coding more than
- * once to a message body."
- */
- CURL_TRC_WRITE(data, "ignoring duplicate 'chunked' decoder");
- return CURLE_OK;
- }
- if(is_transfer && !is_chunked &&
- Curl_cwriter_get_by_name(data, "chunked")) {
- /* RFC 9112, ch. 6.1:
- * "If any transfer coding other than chunked is applied to a
- * response's content, the sender MUST either apply chunked as the
- * final transfer coding or terminate the message by closing the
- * connection."
- * "chunked" must be the last added to be the first in its phase,
- * reject this.
- */
- failf(data, "Reject response due to 'chunked' not being the last "
- "Transfer-Encoding");
- return CURLE_BAD_CONTENT_ENCODING;
- }
- if(!cwt)
- cwt = &error_writer; /* Defer error at use. */
- result = Curl_cwriter_create(&writer, data, cwt, phase);
- CURL_TRC_WRITE(data, "added %s decoder %s -> %d",
- is_transfer? "transfer" : "content", cwt->name, result);
- if(result)
- return result;
- result = Curl_cwriter_add(data, writer);
- if(result) {
- Curl_cwriter_free(data, writer);
- return result;
- }
- }
- } while(*enclist);
- return CURLE_OK;
- }
- #else
- /* Stubs for builds without HTTP. */
- CURLcode Curl_build_unencoding_stack(struct Curl_easy *data,
- const char *enclist, int is_transfer)
- {
- (void) data;
- (void) enclist;
- (void) is_transfer;
- return CURLE_NOT_BUILT_IN;
- }
- void Curl_all_content_encodings(char *buf, size_t blen)
- {
- DEBUGASSERT(buf);
- DEBUGASSERT(blen);
- if(blen < sizeof(CONTENT_ENCODING_DEFAULT))
- buf[0] = 0;
- else
- strcpy(buf, CONTENT_ENCODING_DEFAULT);
- }
- #endif /* CURL_DISABLE_HTTP */
|