123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235 |
- /***************************************************************************
- * _ _ ____ _
- * Project ___| | | | _ \| |
- * / __| | | | |_) | |
- * | (__| |_| | _ <| |___
- * \___|\___/|_| \_\_____|
- *
- * Copyright (C) Daniel Stenberg, <daniel@haxx.se>, et al.
- *
- * This software is licensed as described in the file COPYING, which
- * you should have received as part of this distribution. The terms
- * are also available at https://curl.se/docs/copyright.html.
- *
- * You may opt to use, copy, modify, merge, publish, distribute and/or sell
- * copies of the Software, and permit persons to whom the Software is
- * furnished to do so, under the terms of the COPYING file.
- *
- * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
- * KIND, either express or implied.
- *
- * SPDX-License-Identifier: curl
- *
- ***************************************************************************/
- /* <DESC>
- * Multiplexed HTTP/2 downloads over a single connection
- * </DESC>
- */
- #include <stdio.h>
- #include <stdlib.h>
- #include <string.h>
- #include <errno.h>
- /* somewhat unix-specific */
- #include <sys/time.h>
- #include <unistd.h>
- /* curl stuff */
- #include <curl/curl.h>
- #include <curl/mprintf.h>
- #ifndef CURLPIPE_MULTIPLEX
- /* This little trick will just make sure that we do not enable pipelining for
- libcurls old enough to not have this symbol. It is _not_ defined to zero in
- a recent libcurl header. */
- #define CURLPIPE_MULTIPLEX 0
- #endif
- struct transfer {
- CURL *easy;
- unsigned int num;
- FILE *out;
- };
- #define NUM_HANDLES 1000
- static
- void dump(const char *text, int num, unsigned char *ptr, size_t size,
- char nohex)
- {
- size_t i;
- size_t c;
- unsigned int width = 0x10;
- if(nohex)
- /* without the hex output, we can fit more on screen */
- width = 0x40;
- fprintf(stderr, "%d %s, %lu bytes (0x%lx)\n",
- num, text, (unsigned long)size, (unsigned long)size);
- for(i = 0; i<size; i += width) {
- fprintf(stderr, "%4.4lx: ", (unsigned long)i);
- if(!nohex) {
- /* hex not disabled, show it */
- for(c = 0; c < width; c++)
- if(i + c < size)
- fprintf(stderr, "%02x ", ptr[i + c]);
- else
- fputs(" ", stderr);
- }
- for(c = 0; (c < width) && (i + c < size); c++) {
- /* check for 0D0A; if found, skip past and start a new line of output */
- if(nohex && (i + c + 1 < size) && ptr[i + c] == 0x0D &&
- ptr[i + c + 1] == 0x0A) {
- i += (c + 2 - width);
- break;
- }
- fprintf(stderr, "%c",
- (ptr[i + c] >= 0x20) && (ptr[i + c]<0x80)?ptr[i + c]:'.');
- /* check again for 0D0A, to avoid an extra \n if it's at width */
- if(nohex && (i + c + 2 < size) && ptr[i + c + 1] == 0x0D &&
- ptr[i + c + 2] == 0x0A) {
- i += (c + 3 - width);
- break;
- }
- }
- fputc('\n', stderr); /* newline */
- }
- }
- static
- int my_trace(CURL *handle, curl_infotype type,
- char *data, size_t size,
- void *userp)
- {
- const char *text;
- struct transfer *t = (struct transfer *)userp;
- unsigned int num = t->num;
- (void)handle; /* prevent compiler warning */
- switch(type) {
- case CURLINFO_TEXT:
- fprintf(stderr, "== %u Info: %s", num, data);
- /* FALLTHROUGH */
- default: /* in case a new one is introduced to shock us */
- return 0;
- case CURLINFO_HEADER_OUT:
- text = "=> Send header";
- break;
- case CURLINFO_DATA_OUT:
- text = "=> Send data";
- break;
- case CURLINFO_SSL_DATA_OUT:
- text = "=> Send SSL data";
- break;
- case CURLINFO_HEADER_IN:
- text = "<= Recv header";
- break;
- case CURLINFO_DATA_IN:
- text = "<= Recv data";
- break;
- case CURLINFO_SSL_DATA_IN:
- text = "<= Recv SSL data";
- break;
- }
- dump(text, num, (unsigned char *)data, size, 1);
- return 0;
- }
- static void setup(struct transfer *t, int num)
- {
- char filename[128];
- CURL *hnd;
- hnd = t->easy = curl_easy_init();
- curl_msnprintf(filename, 128, "dl-%d", num);
- t->out = fopen(filename, "wb");
- if(!t->out) {
- fprintf(stderr, "error: could not open file %s for writing: %s\n",
- filename, strerror(errno));
- exit(1);
- }
- /* write to this file */
- curl_easy_setopt(hnd, CURLOPT_WRITEDATA, t->out);
- /* set the same URL */
- curl_easy_setopt(hnd, CURLOPT_URL, "https://localhost:8443/index.html");
- /* please be verbose */
- curl_easy_setopt(hnd, CURLOPT_VERBOSE, 1L);
- curl_easy_setopt(hnd, CURLOPT_DEBUGFUNCTION, my_trace);
- curl_easy_setopt(hnd, CURLOPT_DEBUGDATA, t);
- /* enlarge the receive buffer for potentially higher transfer speeds */
- curl_easy_setopt(hnd, CURLOPT_BUFFERSIZE, 100000L);
- /* HTTP/2 please */
- curl_easy_setopt(hnd, CURLOPT_HTTP_VERSION, CURL_HTTP_VERSION_2_0);
- #if (CURLPIPE_MULTIPLEX > 0)
- /* wait for pipe connection to confirm */
- curl_easy_setopt(hnd, CURLOPT_PIPEWAIT, 1L);
- #endif
- }
- /*
- * Download many transfers over HTTP/2, using the same connection!
- */
- int main(int argc, char **argv)
- {
- struct transfer trans[NUM_HANDLES];
- CURLM *multi_handle;
- int i;
- int still_running = 0; /* keep number of running handles */
- int num_transfers;
- if(argc > 1) {
- /* if given a number, do that many transfers */
- num_transfers = atoi(argv[1]);
- if((num_transfers < 1) || (num_transfers > NUM_HANDLES))
- num_transfers = 3; /* a suitable low default */
- }
- else
- num_transfers = 3; /* suitable default */
- /* init a multi stack */
- multi_handle = curl_multi_init();
- for(i = 0; i < num_transfers; i++) {
- setup(&trans[i], i);
- /* add the individual transfer */
- curl_multi_add_handle(multi_handle, trans[i].easy);
- }
- curl_multi_setopt(multi_handle, CURLMOPT_PIPELINING, CURLPIPE_MULTIPLEX);
- do {
- CURLMcode mc = curl_multi_perform(multi_handle, &still_running);
- if(still_running)
- /* wait for activity, timeout or "nothing" */
- mc = curl_multi_poll(multi_handle, NULL, 0, 1000, NULL);
- if(mc)
- break;
- } while(still_running);
- for(i = 0; i < num_transfers; i++) {
- curl_multi_remove_handle(multi_handle, trans[i].easy);
- curl_easy_cleanup(trans[i].easy);
- }
- curl_multi_cleanup(multi_handle);
- return 0;
- }
|