Mirror of Dinit

Davin McCall 68a8df5d7e Version 0.15.1 1 year ago
.github bceda827ba Add .github metadata (funding) 2 years ago
build 68a8df5d7e Version 0.15.1 1 year ago
configs 8d6ab2f98c Initial support for cgroups 1 year ago
dasynq b79c8b9aee Bundle current version of Dasynq 2 years ago
doc 0f20b86a9f Minor doc updates 1 year ago
src b83cc0e9cc make install: install dinit-monitor 1 year ago
.gitignore 1541bc2442 Add man page for dinit-monitor 1 year ago
BUILD a0b3c07130 Rename BUILD.txt to just BUILD (better consistency) 2 years ago
CONTRIBUTORS f5a8f94393 Add myself to CONTRIBUTORS 2 years ago
LICENSE 53abf22038 Add license (Apache license version 2.0). 8 years ago
Makefile 7e75365c62 Re-work build slightly; only build mconfig from top-level 2 years ago
NEWS 68a8df5d7e Version 0.15.1 1 year ago
README.md 68a8df5d7e Version 0.15.1 1 year ago
TODO 0718625277 Version 0.15.0 1 year ago

README.md

Dinit

v0.15.1 (alpha release #7)

This is the README for Dinit, the service manager and init system. It is intended to provide an overview; For full documentation please check the manual pages. The impatient may wish to check out the getting started guide.

Dinit is used as the init system for Chimera Linux, and is an init system option for Artix Linux.

Contents

  1. Introduction
    1. Features
    2. Target platforms
    3. Other information
  2. Reporting issues
  3. Configuring services
    1. Service types
    2. Service description files
  4. Running Dinit
  5. Controlling services
    1. Service hierarchy and states
    2. Using dinitctl

Introduction

Dinit is a service supervisor with dependency support which can also act as the system "init" program. It was created with the intention of providing a portable init system with dependency management, that was functionally superior to many extant inits. Development goals include clean design, robustness, portability, usability, and avoiding feature bloat (whilst still handling common - and some less-common - use cases). Dinit is designed to integrate with rather than subsume other system software.

Features

Dinit can launch multiple services in parallel, with dependency management (i.e. if one service's operation depends on another, the latter service will be started first). It can monitor the process corresponding to a service, and re-start it if it dies, and it can do this in an intelligent way - first "rolling back" all dependent services, and restarting them when their dependencies are satisfied. The precise nature of dependency relations between services is highly configurable. The dinitctl tool can be used to start or stop services and check their state (by issuing commands to the dinit daemon).

Dinit is designed to run as either as a system service manager (runs as root, uses system paths for configuration) or a user process (runs as a user, uses paths in the user's home directory for configuration).

Target platforms

Dinit is designed to work on POSIXy operating systems such as Linux and OpenBSD. It is written in C++ and uses the Dasynq event handling library, which was written especially to support Dinit. (Note that a copy of Dasynq is bundled with Dinit, so a separate copy is not required for compilation; however, the bundled copy does not include the documentation or test suite).

Other information

See doc/COMPARISON for a comparison of Dinit with similar software packages.

Dinit is licensed under the Apache License, version 2.0. A copy of this license can be found in the LICENSE file.

This software was written by Davin McCall davmac@davmac.org with contributions from many others. See CONTRIBUTORS.

See BUILD for information on how to build Dinit. See the doc directory for information on design, code style, guidelines for contributions, and end-user-oriented documentation.

Reporting issues

Please use Github issues to report bugs, and provide as much information as is necessary to reliably reproduce the issue.

Please do not file feature requests unless you are working on system integration (eg. you are a package maintainer for a distribution that supports Dinit, or you are working to provide Dinit support for a particular distribution) and need to solve a real problem, or unless you are willing to provide patches (in this case you can open an issue for discussion - in which case please also see the CONTRIBUTING file).

Configuring services

This section and the following sections are intended as an introductory guide, and to give a feel for what using Dinit is like. For a complete reference, see the man pages: dinit(8) and dinit-service(5).

Service types

A "service" is nominally a persistent process or system state. The two main types of service are a process service (represented by a an actual process) and a scripted service (which is started and stopped by running a process - often a shell script - to completion). There are also bgprocess services and internal services.

Many programs that you might want to run under Dinit's supervision can run either "in the foreground" or as a daemon ("in the background"), and the choice is dictated by a command line switch (for instance the -D and -F switches to Samba's "smbd"). Although it might seem counterintuitive, the "foreground" mode should be used for programs registered as process services in Dinit; this allows Dinit to monitor the process.

Process services are attractive due to the ease of monitoring (and restarting) the service. After starting a process, there will often be a short delay before the process sets itself up, starts listening on sockets, etc; during this time any other process (including one from a service configured as a dependent) which tries to contact it will not be able to do so. In practice, this is not usually an issue (and external solutions, like D-Bus, do exist), but Dinit does support startup notification (compatible with S6) to avoid the problem of a dependent process relying on not-quite-yet-ready services provided by its dependency. With startup notification configured - assuming it is supported by the process - dependent services will not be started until the service is running properly. If startup notification is not configured, Dinit assumes a process service is successfully started as soon as the process is launched.

As well as process services, as outlined above, there are scripted services, bgprocess services, and internal services.

A scripted service has separate commands for startup and (optional) shutdown. Scripted services can be used for tasks such as mounting file systems that don't need a persistent process, and in some cases can be used for daemon processes (although Dinit will not be able to supervise a process that is registered as a scripted service).

A bgprocess service is a mix between a process service and a scripted service. A command is used to start the service, which then forks to create the daemon process; the process ID of this daemon process is expected to be made available in a file which Dinit can then read, before the original process terminates. Many existing daemons can operate in this way. The process can only be supervised if Dinit runs as the system "init" (PID 1), or can otherwise mark itself as a subreaper (which is possible on Linux, FreeBSD and DragonFlyBSD) - otherwise Dinit cannot reliably notice the process terminating.

An internal service is just a placeholder service that can be used to describe a set of dependencies. An internal service has no corresponding process.

Service description files

Dinit discovers services by reading service description files. These files reside in a directory (/etc/dinit.d is the default "system" location, with /usr/local/lib/dinit.d and /lib/dinit.d also searched; the default user location is $HOME/.config/dinit.d) and the name of a service description file matches the name of the service it configures.

For example, a service named "mysql" might be configured via the service description file named /etc/dinit.d/mysql. Service descriptions are loaded lazily, as needed by Dinit; so, this service description file will usually be read when the mysql service is first started.

(An example of a complete set of system service descriptions can be found in the doc/linux/services directory).

A service description file has a textual format and consists of a number of parameter settings. Settings in the file are denoted as a parameter name followed by either an equal sign or colon and then the parameter value (all on the same line). Comments begin with a hash mark (#) and extend to the end of the line (they must be separated from setting values by at least one whitespace character).

Parameter values are interpreted literally, except that:

  • whitespace is collapsed to a single space
  • double quotes can be used around all or part(s) of a parameter to prevent whitespace collapse and interpretation of special characters
  • backslash can be used to 'escape' the next character, preventing any special meaning from being associated with it. It can be used to include non-collapsing whitespace, double-quote marks, and backslashes in the parameter value.

Some examples of the available parameters are:

type = process | bgprocess | scripted | internal
command = ...
stop-command = ...
run-as = (user-id)
restart = (boolean)
smooth-recovery = (boolean)
logfile = ...
pid-file = ...
options = ...
depends-on = (service name)
depends-ms = (service name)
waits-for = (service name)

Descriptions of individual parameters follows:

command = (external script or executable, and arguments)

For a 'process' service, this is the process to run. For a 'scripted' service, this command is run to start the service.

stop-command = (external script or executable, and arguments)

For a 'scripted' service, this command is run to stop the service.

run-as = (user-id)

Specifies which user to run the process(es) for this service as. The group id for the process will also be set to the primary group of the specified user.

restart = yes | true | no | false

Specifies whether the service should automatically restart if it becomes stopped (for any reason, including being explicitly requested to stop). Only active services will restart automatically.

smooth-recovery = yes | true | no | false

For process services only. Specifies that, should the process die, it can be restarted without bringing the service itself down. This means that any dependent services do not need to be stopped/restarted. Such recovery happens regardless of the "restart" setting (if smooth-recovery is enabled, the service does not reach the stopped state when the process terminates unexpectedly).

logfile = (log file path)

Specifies the log file for the service. Output from the service process will go this file.

pid-file = (path to file)

For "bgprocess" type services only; specifies the path of the file where the daemon will write its process ID before detaching (this file is trusted; Dinit may send signals to the specified PID. It should not be possible for unauthorised users to modify the file contents!).

depends-on = (service name)

This service depends on the named service. Starting this service will start the named service; the command to start this service will not be executed until the named service has started. If the named service is stopped then this service will also be stopped.

depends-ms = (service name)

Indicates a "milestone dependency" on the named service. This service requires the named service to start before it starts itself. Once the named service has started, it remains active due to the dependency, but if it stops for any reason then the dependency link is broken until the next time this service is started.

waits-for = (service name)

When this service is started, wait for the named service to finish starting (or to fail starting) before commencing the start procedure for this service. Starting this service (the dependent) will automatically start the named service. This is similar to "depends-ms" but allows the dependency to fail to start without causing the dependent to also fail.

options = ( no-sigterm | runs-on-console | starts-on-console | start-interruptible ) ...

Specifies various options for this service. Some of the possible options include:

no-sigterm : specifies that the TERM signal should not be send to the

          process to terminate it. (Another signal can be specified using
          the `termsignal` setting; if no other signal is specified, *no*
          signal will be sent).

runs-on-console : specifies that this service uses the console; its input

          and output should be directed to the console. A service running
          on the console prevents other services from running on the
          console (they will queue for the console).
          The "interrupt" key (normally control-C) will be active for
          process / scripted services that run on the console. Handling
          of an interrupt is determined by the service process, but
          typically will cause it to terminate.

starts-on-console : specifies that this service uses the console during

          service startup. This is implied by runs-on-console, but can
          be specified separately for services that need the console
          while they start but not afterwards.
          This setting is not applicable to regular _process_ services,
          but can be used for _scripted_ and _bgprocess_ services. It
          allows for interrupting startup via the "interrupt" key
          (normally control-C). This is useful to allow filesystem checks
          to be interrupted/skipped.

start-interruptible : this service can have its startup interrupted

          (cancelled) if it becomes inactive while still starting.
          The SIGINT signal will be sent to the process to cancel its
          startup. This is meaningful only for _scripted_ and _bgprocess_
          services. 

Please see the manual page for a full list of service parameters and options.

Running Dinit

Dinit can run as the system "init" - the first process started by the kernel on boot - which is normally done by linking or copying it to /sbin/init. This is currently supported only on Linux. It requires having suitable service descriptions in place and should be attempted only by those comfortable with low-level system administration and recovery. See doc/linux directory for more information.

Dinit can also run as a normal process, and can be started in this case by a regular user.

By default, regardless of whether it runs as a system or user process, Dinit will look for and start the service named "boot". This service should be configured with dependencies which will cause any other desired services to start. You can specify alternative services to start via the dinit command line (consult the man page for more information).

Controlling services

Service hierarchy and states

Services can depend on other services for operation, and so form a dependency hierarchy. Starting a service which depends on another causes that other service to start (and the first service waits until the latter has started before its process is launched and it is itself considered started).

Services are considered active when they are not stopped. Services can also be explicitly marked as active (this normally happens when you explicitly start a service). Finally, a service with an active dependent is also considered active.

If a service stops and becomes inactive (i.e. it is not explicitly marked active and has no active dependents) then any services it depends on will also be marked inactive and stopped unless they have other active dependents, or were explicitly started and marked active.

What this means is that, in general, starting an (inactive, stopped) service and then stopping it will return the system to its prior state - no dependencies which were started automatically will be left running.

Using dinitctl

You can use the "dinitctl" utility to start and stop services. Typical invocations are:

dinitctl start <service-name>
dinitctl stop <service-name>
dinitctl release <service-name>
dinitctl list

Note that a start marks the service active, as well as starting it if it is not already started; the opposite of this is actually release, which clears the active mark and stops it if it has no active dependent services.

The stop command by default acts as a release that also forces the service to stop. If stopping a service would also require a dependent service to stop, a warning will be issued; the --force option will be required to bypass the warning, though it is generally advisable to stop the dependent systems manually one-by-one - indirectly force-stopping the boot service may cause every service to stop, killing user sessions!

When run as root, dinitctl (by default) communicates with the system instance of Dinit. Otherwise, it communicates with a user (personal) instance. This can be overridden (using -u or -s for the user or system instance, respectively), but note that regular users will generally lack the required permission to communicate with the system instance, which is intended to be controlled only by the root user.

Here is an example command for starting a service:

dinitctl start mysql   # start mysql service

You can "pin" a service in either the stopped or started state, which prevents it from changing state either due to a dependency/dependent or a direct command:

dinitctl start --pin mysql  # start mysql service, pin it as "started"
dinitctl stop mysql  # removes activation, service doesn't stop due to pin
dinitctl unpin mysql # release pin; service will now stop

You can pin a service in the stopped state in order to make sure it doesn't get started accidentally (either via a dependency or directly) when you are performing administration or maintenance.

Check the state of an individual service using the "status" subcommand:

dinitctl status mysql

The output will tell you the current service state; for a running service, it may look something like the following:

Service: mysql
    State: STARTED
    Activation: explicitly started
    Process ID: 3393

Finally, you can list the state of all loaded services:

dinitctl list

This may result in something like the following:

[[+]     ] boot
[{+}     ] tty1 (pid: 300)
[{+}     ] tty2 (pid: 301)
[{+}     ] tty3 (pid: 302)
[{+}     ] tty4 (pid: 303)
[{+}     ] loginready (has console)
[{+}     ] rcboot
[{+}     ] filesystems
[{+}     ] udevd (pid: 4)
[     {-}] mysql

The above represents a number of started services and one stopped service (mysql). Only the boot service is marked active ([+] rather than {+}); all other services are running only because they are (directly or indirectly) dependencies of boot. Services transitioning state (starting or stopping) are displayed with an arrow indicating the transition direction:

[[ ]<<   ] mysql     # starting (and marked active)
[   >>{ }] mysql     # stopping

The brackets indicate the target state, which may not be the state to which the service is currently transitioning. For example:

[   <<{ }] mysql     # starting, but will stop after starting
[{ }>>   ] mysql     # stopping, but will restart once stopped

Remember that a starting service may be waiting for its dependencies to start, and a stopping service may be waiting for its dependencies to stop.

For a complete summary of dinitctl command line options, use:

dinitctl --help

Or, for more detailed help, check the manual page (man dinitctl).