.\" -*- mode: nroff -*-
.\" This file is part of GNUnet.
.\" Copyright (C) 2012-2015,2018,2019 GNUnet e.V.
.\"
.\" Permission is granted to copy, distribute and/or modify this document
.\" under the terms of the GNU Free Documentation License, Version 1.3 or
.\" any later version published by the Free Software Foundation; with no
.\" Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts.  A
.\" copy of the license is included in the file
.\" FDL-1.3.
.\"
.\" A copy of the license is also available from the Free Software
.\" Foundation Web site at http://www.gnu.org/licenses/fdl.html.
.\"
.\" Alternately, this document is also available under the General
.\" Public License, version 3 or later, as published by the Free Software
.\" Foundation.  A copy of the license is included in the file
.\" GPL3.
.\"
.\" A copy of the license is also available from the Free Software
.\" Foundation Web site at http://www.gnu.org/licenses/gpl.html.
.\"
.\" SPDX-License-Identifier: GPL3.0-or-later OR FDL1.3-or-later
.\"
.Dd October 26, 2018
.Dt GNUNET.CONF 5
.Os
.Sh NAME
.Nm gnunet.conf
.Nd GNUnet configuration file
.Sh DESCRIPTION
A GNUnet setup typically consists of a set of service processes run by a
user "gnunet" and a set of user-interface processes run by a standard account.
The default location for the configuration file for the services is
.Pa ~gnunet/.config/gnunet.conf Ns .
However, as normal users also may need read-access to this configuration,
you might want to instead put the service process configuration in
.Pa @SYSCONFDIR@/gnunet.conf Ns .
.Xr gnunet-setup 1 ,
part of gnunet-gtk, can be used to edit this configuration.
The parts of GNUnet that are run as a normal user may have config
options too and they read from
.Pa $HOME/.config/gnunet.conf Ns .
The latter config file can skip any options for the services.
.Pp
The basic structure of the configuration file is the following.
.Bl -bullet -offset indent -compact
.It
The file is split into sections.
.It
Every section begins with a token in square brakets.
The current section ends when a new section starts or end of file is
encountered.
.It
A section contains a number of options of the form "OPTION=VALUE".
.It
Whitespace surounding the "=" token is striped out, in other words
"OPTION = VALUE" and "OPTION=VALUE" are treated equal.
.It
Empty lines and lines beginning with a "#" are treated as comments.
.It
Boolean values are given as "YES" and "NO".
.El
.Pp
Almost all options are optional.
The tools resort to reasonable defaults if an option is not present.
Default values for all of the options can be found in the files in the
.Pa $GNUNET_PREFIX/share/gnunet/config.d/
directory.
A typical setup will work out of the box with those.
See the examples section below for some common setups on top of that.
.Ss Variable naming conventions and data types
Boolean values for options are set via "YES" or "NO" values, without the
double-quotes.
.Pp
Options which include "PATH" or "path" define a path on the file-system
and can take additional variables in the path, such as
.Ev $GNUNET_TMP .
.Pp
Section names as listed more in detail below, are small letters only
enclosed by square brakets.
.Ss GENERAL OPTIONS
Many options will be common between sections.
They can be repeated under each section with different values.
The "[PATHS]" section is special.
Here, it is possible to specify values for variables like "GNUNET_HOME".
Then, in all filenames that begin with "$GNUNET_HOME" the "$GNUNET_HOME" will
be replaced with the respective value at runtime.
The main use of this is to redefine "$GNUNET_HOME", which by default points to
.Pa $HOME/.config/ Ns .
By setting this variable, you can change the location where GNUnet stores
its internal data.
.Pa gnunet.conf
accepts the variable
.Ev GNUNET_TMP
which we suggest to use in place of the absolute definition of
.Pa /tmp Ns .
So instead of
.Pa /tmp/foo
you would write
.Pa $GNUNET_TMP/foo .
The usage of
.Pa $GNUNET_TMP/foo ,
will result in
.Pa $TMPDIR/gnunet/foo ,
or
.Pa $TMP/gnunet/foo
and finally, if
.Ev TMPDIR
is undefined,
.Pa /tmp/gnunet/foo .
The following options are generic and shared by all services:
.Bl -tag -width indent
.It HOSTNAME
The hostname specifies the machine on which the service is running.
This is usually "localhost".
.It BINARY
The filename that implements the service.
For example "gnunet-service-ats".
.It IMMEDIATE_START
Start the service always when the peer starts.
Set to YES for services that should always be launched, even if no other
service explicitly needs them.
.It START_ON_DEMAND
Set to YES to automatically start the service when it is requested by another
service.
YES for most GNUnet services.
.It NOARMBIND
Set to YES to never have ARM bind to the respective socket.
This option is mostly for debugging in situations where ARM cannot pass the
pre-bound socket to the child due to interference from PREFIX-commands.
This option is only effective in combination with IMMEDIATE_START being YES.
NO by default.
.It PREFIX
PREFIX the given command (with its arguments) to the actual BINARY
to be executed.
Useful to run certain services under special supervisors like strace,
dtrace, or valgrind.
Typically used in combination with IMMEDIATE_START and NOARMBIND.
Empty by default.
.It ACCEPT_FROM
A semi-column separated list of IPv4 addresses that are allowed to use
the service; usually 127.0.0.1.
.It ACCEPT_FROM6
A semi-column separated list of IPv6 addresses that are allowed to use
the service; usually ::1.
.It UNIXPATH
Path to use for the UNIX domain socket for inter process communication with
the service on POSIX systems.
.It UNIX_MATCH_UID
If UNIX domain sockets are used, set this to YES if only users with the
same UID are allowed to access the service.
.It UNIX_MATCH_GID
If UNIX domain sockets are used, set this to YES if only users with the
same GID are allowed to access the service.
.It RUN_PER_USER
End-users should never have to change the defaults GNUnet provides for
this option.
.Bl -tag -width indent
.It YES
Set to YES if this service should be run per-user.
.It NO
Set to NO if this is a system service.
.El
.El
In the following sections the absence of a default value is either
expressed as "Default value:" followed by nothing, or the lack of this line.
.Ss ARM
.Bl -tag -width indent 
.It PORT
Default value: 2087
.It HOSTNAME
Default value: localhost
.It BINARY
Default value: gnunet-service-arm
.It ACCEPT_FROM
Default value: 127.0.0.1;
.It ACCEPT_FROM6
Default value: ::1;
.It UNIXPATH
Special case, uses user runtime dir even for per-system service.
.Pp
Default value: $GNUNET_USER_RUNTIME_DIR/gnunet-service-arm.sock
.It UNIX_MATCH_UID
Default value: YES
.It UNIX_MATCH_GID
Default value: YES
.It GLOBAL_POSTFIX
In the
.Fl l
option, format characters from
.Xr strftime 3
are allowed; In the GLOBAL_POSTFIX, "{}" stands for the name of the
respective service.
Thus the following example for this option would introduce per-service logging
with a new log file each day.
Note that only the last 3 log files are preserved.
Example:
.Pp
.Bd literal
-l $GNUNET_CACHE_HOME/{}-%Y-%m-%d.log
.Ed
.Pp
Default value:
.It GLOBAL_PREFIX
Default value:
.It START_SYSTEM_SERVICES
If set to YES, ARM will only start services that are marked as system-level
services (and we'll expect a second ARM to be run per-user to run
user-level services).
Note that in this case you must have manually created a different configuration
file with the user where at least this and the START_USER_SERVICES
options differ.
.It START_USER_SERVICES
If set to YES, ARM will only start services that are marked as per-user
services (and we'll expect a system user to run ARM to provide system-level
services).
Per-user services enable better personalization and priviledge separation and
in particular ensures that personal data is stored under $HOME, which might be
important in a multi-user system (or if $HOME is encrypted and
.Pa /var/
is not).
.Pp
Note that if you have different ARM services for SYSTEM and USER, and you are
not on UNIX, you need to change the PORT option for the USER ARM instances to
some free port (counting down from 2085 should provide free ports).
.It RESOURCE_DIAGNOSTICS
File where we should log per-service resource consumption on exit.
.Pp
Default value: resource.log
.It USERNAME
Name of the user that will be used to provide the service.
.Pp
Default value:
.It MAXBUF
Default value:
.It TIMEOUT
Default value:
.It DISABLEV6
Default value:
.It BINDTO
Default value:
.It REJECT_FROM
Default value:
.It REJECT_FROM6
Default value:
.It PREFIX
Default value:
.El
.Ss ATS
.Bl -tag -width indent
.It PORT
Default value: 2098
.It HOSTNAME
Default value: localhost
.It BINARY
Default value: gnunet-service-ats
.It ACCEPT_FROM
Default value: 127.0.0.1;
.It ACCEPT_FROM6
Default value: ::1;
.It UNIXPATH
Default value: $GNUNET_RUNTIME_DIR/gnunet-service-ats.sock
.It UNIX_MATCH_UID
Default value: NO
.It UNIX_MATCH_GID
Default value: YES
.It MODE
Designated assignment mode.
Possible values: PROPORTIONAL, MLP, RIL.
.Pp
Default value: proportional
.It UNSPECIFIED_QUOTA_IN
quotes in KiB or MiB per seconds.
Or use the word "unlimited".
Default value: 64 KiB
.It UNSPECIFIED_QUOTA_OUT
quotes in KiB or MiB per seconds.
Or use the word "unlimited".
Default value: 64 KiB
.It LOOPBACK_QUOTA_IN
quotes in KiB or MiB per seconds.
Or use the word "unlimited".
Default value: unlimited
.It LOOPBACK_QUOTA_OUT
quotes in KiB or MiB per seconds.
Or use the word "unlimited".
Default value: unlimited
.It LAN_QUOTA_IN
quotes in KiB or MiB per seconds.
Or use the word "unlimited".
Default value: unlimited
.It LAN_QUOTA_OUT
quotes in KiB or MiB per seconds.
Or use the word "unlimited".
Default value: unlimited
.It WAN_QUOTA_IN
quotes in KiB or MiB per seconds.
Or use the word "unlimited".
Default value: 64 KiB
.It WAN_QUOTA_OUT
quotes in KiB or MiB per seconds.
Or use the word "unlimited".
Default value: 64 KiB
.It WLAN_QUOTA_IN
quotes in KiB or MiB per seconds.
Or use the word "unlimited".
Default value: 1 MiB
.It WLAN_QUOTA_OUT
quotes in KiB or MiB per seconds.
Or use the word "unlimited".
Default value: 1 MiB
.It BLUETOOTH_QUOTA_IN
Default value: 128 KiB
.It BLUETOOTH_QUOTA_OUT
Default value: 128 KiB
.It PROP_PROPORTIONALITY_FACTOR
How proportional to preferences is bandwidth distribution in a network?
Default value: 2.00
.Bl -tag -width indent
.It 1.0
Fair with respect to addresses without preferences.
.It > 1.0
The bigger, the more respect is payed to preferences.
.El
.It PROP_STABILITY_FACTOR
Should we stick to existing connections are prefer to switch?
[1.0...2.0], lower value prefers to switch, bigger value is more tolerant.
.Pp
Default value: 1.25
.It MLP_MAX_DURATION
Maximum duration for a solution process (both LP and MILP).
Default value: 3 s
.It MLP_MAX_ITERATIONS
Maximum numbero of iterations for a solution process (only LP).
Tolerated MIP Gap [0.0 .. 1.0].
.Pp
Default value: 0.025
.It MLP_MAX_MIP_GAP
Tolerated LP/MIP Gap [0.0 .. 1.0].
.Pp
Default value: 0.025
.It MLP_MAX_LP_MIP_GAP
Default value: 0.025
.It MLP_MAX_ITERATIONS
Maximum number of iterations for a solution process.
.Pp
Default value: 1024
.It MLP_COEFFICIENT_D
Default value: 1.0
.It MLP_COEFFICIENT_U
Default value: 1.0
.It MLP_COEFFICIENT_R
Default value: 1.0
.It MLP_MIN_BANDWIDTH
Default value: 1024
.It MLP_MIN_CONNECTIONS
Default value: 4
.It MLP_DUMP_PROBLEM_ALL
Dump all problems to disk.
.Pp
Default value: YES
.It MLP_DUMP_SOLUTION_ALL
Dump all solution to disk.
.Pp
Default value: YES
.It MLP_GLPK_VERBOSE
Print GLPK output.
.Pp
Default value: YES
.It MLP_DUMP_PROBLEM_ON_FAIL
Dump all problems to disk.
.Pp
Default value: YES
.It MLP_DUMP_SOLUTION_ON_FAIL
Dump all solution to disk.
.Pp
Default value: YES
.It RIL_STEP_TIME_MIN
Default value: 500 ms
.It RIL_STEP_TIME_MAX
Default value: 1000 ms
.It RIL_ALGORITHM
Possible values: SARSA or Q-LEARNING.
.Pp
Default value: Q-LEARNING
.It RIL_DISCOUNT_BETA
Default value: 0.7
.It RIL_GRADIENT_STEP_SIZE
Default value: 0.3
.It RIL_TRACE_DECAY
Default value: 0.2
.It RIL_EXPLORE_RATIO
Default value: 0.1
.It RIL_GLOBAL_REWARD_SHARE
Default value: 1
.El
.Ss AUCTION
.Bl -tag -width indent
.El
.Ss CADET
.Bl -tag -width indent
.It IMMEDIATE_START
Default value: YES
.It START_ON_DEMAND
Default value: YES
.It PORT
Default value: 2096
.It HOSTNAME
Default value: localhost
.It BINARY
Default value: gnunet-service-cadet
.It PREFIX
.It ACCEPT_FROM
Default value: 127.0.0.1;
.It ACCEPT_FROM6
Default value: ::1;
.It UNIXPATH
Default value: $GNUNET_RUNTIME_DIR/gnunet-service-cadet.sock
.It UNIX_MATCH_UID
Default value: NO
.It UNIX_MATCH_GID
Default value: YES
.It REFRESH_CONNECTION_TIME
How often do we send KEEPALIVE messages on connections to keep them from
timing out?
.Pp
Default value: 5 min
.It DROP_PERCENT
Percentage of packets CADET is artificially dropping.
Used for testing only!
.It ID_ANNOUNCE_TIME
How frequently do we usually anounce our presence in the DHT?
.Pp
Default value: 1 h
.It CONNECT_TIMEOUT
Default value: 30 s
.It DHT_REPLICATION_LEVEL
What is the replication level we give to the DHT when announcing our existence?
Usually there is no need to change this.
.Pp
Default value: 3
.It MAX_TUNNELS
Not implemented
.Pp
Default value: 1000
.It MAX_CONNECTIONS
Not implemented, replaced by MAX_ROUTES in NEW CADET!
.Pp
Default value: 1000
.It MAX_ROUTES
How many routes do we participate in at most?
Should be smaller than MAX_MSGS_QUEUE.
.Pp
Default value: 5000
.It MAX_MSGS_QUEUE
Not implemented
.Pp
Default value: 10000
.It MAX_PEERS
Not implemented
.Pp
Default value: 1000
.It RATCHET_TIME
How often do we advance the ratchet even if there is not any traffic?
.Pp
Default value: 1 h
.It RATCHET_MESSAGES
How often do we advance the ratched if there is traffic?
.Pp
Default value: 64
.El
.Ss COMMUNICATOR-UNIX
.Bl -tag -width indent
.It UNIXPATH
Default value: $GNUNET_RUNTIME_DIR/gnunet-communicator-unix.sock
.El
.Ss CONSENSUS
.Bl -tag -width indent
.It START_ON_DEMAND
Default value: YES
.It PORT
Default value: 2103
.It HOSTNAME
Default value: localhost
.It BINARY
Default value: gnunet-service-consensus
.It ACCEPT_FROM
Default value: 127.0.0.1;
.It ACCEPT_FROM6
Default value: ::1;
.It UNIXPATH
Default value: $GNUNET_RUNTIME_DIR/gnunet-service-consensus.sock
.It UNIX_MATCH_UID
Default value: YES
.It UNIX_MATCH_GID
Default value: YES
.El
.Ss CORE
.Bl -tag -width indent
.It START_ON_DEMAND
Default value: YES
.It PORT
Default value: 2092
.It HOSTNAME
Default value: localhost
.It BINARY
Default value: gnunet-service-core
.It ACCEPT_FROM
Default value: 127.0.0.1;
.It ACCEPT_FROM6
Default value: ::1;
.It UNIXPATH
Default value: $GNUNET_RUNTIME_DIR/gnunet-service-core.sock
.It UNIX_MATCH_UID
Default value: NO
.It UNIX_MATCH_GID
Default value: YES
.It DISABLE_SOCKET_FORWARDING
Default value: NO
.It USERNAME
.It MAXBUF
.It TIMEOUT
.It DISABLEV6
.It BINDTO
.It REJECT_FROM
.It REJECT_FROM6
.It PREFIX
.It USE_EPHEMERAL_KEYS
Default value: YES
.Pp
This MUST be set to YES in production, only set to NO for testing for
performance (testbed/cluster-scale use!).
.El
.Ss DATACACHE-POSTGRES
.Bl -tag -width indent
.It CONFIG
Default value: postgres:///gnunet
.El
.Ss DATASTORE
.Bl -tag -width indent
.It START_ON_DEMAND
Default value: YES
.It UNIXPATH
Default value: $GNUNET_RUNTIME_DIR/gnunet-service-datastore.sock
.It UNIX_MATCH_UID
Default value: NO
.It UNIX_MATCH_GID
Default value: YES
.It PORT
Default value: 2093
.It HOSTNAME
Default value: localhost
.It BINARY
Default value: gnunet-service-datastore
.It ACCEPT_FROM
Default value: 127.0.0.1;
.It ACCEPT_FROM6
Default value: ::1;
.It QUOTA
Default value: 5 GB
.It BLOOMFILTER
Default value: $GNUNET_DATA_HOME/datastore/bloomfilter
.It DATABASE
Default value: sqlite
.It DISABLE_SOCKET_FORWARDING
Default value: NO
.El
.Ss DATASTORE-SQLITE
.Bl -tag -width indent
.It FILENAME
Default value: $GNUNET_DATA_HOME/datastore/sqlite.db
.El
.Ss DATASTORE-POSTGRES
.Bl -tag -width indent
.It CONFIG
Default value: postgres:///gnunet
.El
.Ss DATASTORE-MYSQL
.Bl -tag -width indent
.It DATABASE
Default value: gnunet
.It CONFIG
Default value: ~/.my.cnf
.It USER
Default value: gnunet
.It PASSWORD
.It HOST
Default value: localhost
.It PORT
Default value: 3306
.El
.Ss DATASTORE-HEAP
.Bl -tag -width indent
.It HASHMAPSIZE
Default value: 1024
.El
.Ss DHT
.Bl -tag -width indent
.It IMMEDIATE_START Ar boolean
Default value: YES
.It START_ON_DEMAND Ar boolean
Default value: YES
.It PORT Ar integer
Default value: 2095
.It HOSTNAME Ar string
Default value: localhost
.It BINARY Ar string
Default value: gnunet-service-dht
.It ACCEPT_FROM Ar string
Default value: 127.0.0.1;
.It ACCEPT_FROM6 Ar string
Default value: ::1;
.It BUCKET_SIZE Ar integer
Default value: 4
.It UNIXPATH Ar path
Default value: $GNUNET_RUNTIME_DIR/gnunet-service-dht.sock
.It UNIX_MATCH_UID Ar boolean
Default value: NO
.It UNIX_MATCH_GID Ar boolean
Default value: YES
.It DISABLE_SOCKET_FORWARDING Ar boolean
Default value: NO
.It USERNAME =
.It MAXBUF =
.It TIMEOUT =
.It DISABLEV6 =
.It BINDTO =
.It REJECT_FROM =
.It REJECT_FROM6 =
.It PREFIX =
.It
# Should the DHT cache results that we are routing in the DATACACHE as well?
CACHE_RESULTS = YES
.It
# Special option to disable DHT calling 'try_connect' (for testing)
DISABLE_TRY_CONNECT = NO
.El
.Ss DHTCACHE
.Bl -tag -width indent
.It DATABASE
Default value: heap
.It QUOTA
Default value: 50 MB
.It DISABLE_BF_RC Ar boolean
Disable RC-file for Bloom filter?
(for benchmarking with limited IO availability)
.Pp
Default value: NO
.Ss EXIT
.Bl -tag -width indent
.El
.Ss FS
.Bl -tag -width indent
.El
.Ss GNS
.Bl -tag -width indent
.El
.Ss HOSTLIST
.Bl -tag -width indent
.El
.Ss IDENTITY
.Bl -tag -width indent
.El
.Ss NAMECACHE
.Bl -tag -width indent
.El
.Ss NAMESTORE
.Bl -tag -width indent
.El
.Ss NAT-AUTO
.Bl -tag -width indent
.El
.Ss NAT
.Bl -tag -width indent
.El
.Ss NSE
.Bl -tag -width indent
.El
.Ss PEERINFO
.Bl -tag -width indent
.El
.Ss PEERSTORE
.Bl -tag -width indent
.El
.Ss PT
.Bl -tag -width indent
.El
.Ss REGEX
.Bl -tag -width indent
.El
.Ss RESOLVER
.Bl -tag -width indent
.El
.Ss REST
.Bl -tag -width indent
.It UNIXPATH
Default value: $GNUNET_USER_RUNTIME_DIR/gnunet-service-rest.sock
.It BINARY
Default value: gnunet-rest-server
.It BIND_TO
Default value: 127.0.0.1
.It BIND_TO6
Default value: ::1
.It REST_PORT
Default value: 7776
.It REST_ALLOW_HEADERS
Default value: Authorization,Accept,Content-Type
.It REST_ALLOW_ORIGIN
Default value: *
.It REST_ALLOW_CREDENTIALS
Default value: true
.El
.Ss REVOCATION
.Ss SCALARPRODUCT
.Ss SECRETSHARING
.Ss SET
.Ss STATISTICS
.Ss TEMPLATE
.Ss TESTBED-LOGGER
.Ss TESTBED
.Ss TESTING
.Ss TOPOLOGY
.Bl -tag -width indent
.It IMMEDIATE_START
Default value: YES
.It NOARMBIND
Default value: YES
.It MINIMUM-FRIENDS
Default value: 0
.It FRIENDS-ONLY
Default value: NO
.It TARGET-CONNECTION-COUNT
Default value: 16
.It FRIENDS
Default value: $GNUNET_CONFIG_HOME/topology/friends.txt
.It BINARY
Default value: gnunet-daemon-topology
.El
.Ss TRANSPORT
.Ss UTIL
.Ss VPN
.Bl -tag -width indent
.It START_ON_DEMAND
Default value: YES
.It PORT
Default value: 2105
.It HOSTNAME
Default value: localhost
.It BINARY
Default value: gnunet-service-vpn
.It ACCEPT_FROM
Default value: 127.0.0.1;
.It ACCEPT_FROM6
Default value: ::1;
.It UNIXPATH
Default value: $GNUNET_RUNTIME_DIR/gnunet-service-vpn.sock
.It UNIX_MATCH_UID
Default value: NO
.It UNIX_MATCH_GID
Default value: YES
.It IPV6ADDR
Default value: 1234::1
.It IPV6PREFIX
Default value: 32
.It IPV4ADDR
Default value: 10.11.10.1
.It IPV4MASK
Default value: 255.255.0.0
.It VIRTDNS
Default value: 10.11.10.2
.It VIRTDNS6
Default value: 1234::17
.It IFNAME
Default value: vpn-gnunet
.El
.Ss ZONEMASTER
.Bl -tag -width indent
.It START_ON_DEMAND
Default value: YES
.It IMMEDIATE_START
Default value: YES
.It HOSTNAME
Default value: localhost
.It BINARY
Default value: gnunet-service-zonemaster
.It UNIXPATH
Default value: $GNUNET_USER_RUNTIME_DIR/gnunet-service-zonemaster.sock
.It PORT
Default value: 2123
.It UNIX_MATCH_UID
Do we require users that want to access GNS to run this process (usually
not a good idea)?
.Pp
Default value: NO
.It UNIX_MATCH_GID
Do we require users that want to access GNS to be in the 'gnunet' group?
.Pp
Default value: NO
.It MAX_PARALLEL_BACKGROUND_QUERIES
How many queries is GNS allowed to perform in the background at the same time?
.Pp
Default value: 1000
.It ZONE_PUBLISH_TIME_WINDOW
How frequently do we try to publish our full zone?
.Pp
Default value: 4 h
.It USE_CACHE
Using caching or always ask DHT?
.Pp
Default value: YES
.It PREFIX
.El
.Ss ZONEMASTER-MONITOR
.Bl -tag -width indent
.It START_ON_DEMAND
Default value: YES
.It IMMEDIATE_START
Default value: YES
.It HOSTNAME
Default value: localhost
.It BINARY
Default value: gnunet-service-zonemaster-monitor
.It UNIXPATH
Default value: $GNUNET_USER_RUNTIME_DIR/gnunet-service-zonemaster-monitor.sock
.It PORT
Default value: 2124
.It UNIX_MATCH_UID
Do we require users that want to access GNS to run this process (usually not
a good idea)?
.Pp
Default value: NO
.It UNIX_MATCH_GID
Do we require users that want to access GNS to be in the 'gnunet' group?
.Pp
Default value:
.Li NO
.El
.Sh EXAMPLES
This example is a simple way to get started, using a server that has a known
list of peers to get you started.
Most users will be behind a firewall on IPv4, as such NAT is enabled.
Please remember to change your IP address to the actual external address
for your usage.
.Bd -literal -offset indent -compact
[hostlist]
OPTIONS = \-b \-e

[nat]
BEHIND_NAT = YES
ENABLE_UPNP = YES
DISABLEV6 = YES
EXTERNAL_ADDRESS = 157.166.249.10

[arm]
START_SYSTEM_SERVICES = YES
START_USER_SERVICES = NO
.Ed
.Sh FILES
.Pa ~gnunet/.config/gnunet.conf
GNUnet system-user configuration file
.Pa $HOME/.config/gnunet.conf
User specific GNUnet configuration file
.Pa @SYSCONFDIR@/gnunet.conf
Systemwide GNUnet configuration file
.Pa $GNUNET_PREFIX/share/gnunet/config.d/
GNUnet configuration directory with all default option values
.Sh SEE ALSO
.Xr env 1 ,
.Xr gnunet-arm 1 ,
.Xr gnunet-setup 1 ,
.Xr strftime 3 .
.Pp
The full documentation for gnunet is maintained as a Texinfo manual.
If the
.Xr info 1
and gnunet programs are properly installed at your site, the command
.Pp
.Dl info gnunet
.Pp
should give you access to the complete handbook,
.Pp
.Dl info gnunet-c-tutorial
.Pp
will give you access to a tutorial for developers.
.Pp
Depending on your installation, this information is also available in
.Xr gnunet 7 and
.Xr gnunet-c-tutorial 7 .
.\".Sh HISTORY
.\".Sh AUTHORS
.Sh BUGS
Report bugs by using
.Lk https://bugs.gnunet.org
or by sending electronic mail to
.Aq Mt gnunet-developers@gnu.org .