12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788899091929394959697989910010110210310410510610710810911011111211311411511611711811912012112212312412512612712812913013113213313413513613713813914014114214314414514614714814915015115215315415515615715815916016116216316416516616716816917017117217317417517617717817918018118218318418518618718818919019119219319419519619719819920020120220320420520620720820921021121221321421521621721821922022122222322422522622722822923023123223323423523623723823924024124224324424524624724824925025125225325425525625725825926026126226326426526626726826927027127227327427527627727827928028128228328428528628728828929029129229329429529629729829930030130230330430530630730830931031131231331431531631731831932032132232332432532632732832933033133233333433533633733833934034134234334434534634734834935035135235335435535635735835936036136236336436536636736836937037137237337437537637737837938038138238338438538638738838939039139239339439539639739839940040140240340440540640740840941041141241341441541641741841942042142242342442542642742842943043143243343443543643743843944044144244344444544644744844945045145245345445545645745845946046146246346446546646746846947047147247347447547647747847948048148248348448548648748848949049149249349449549649749849950050150250350450550650750850951051151251351451551651751851952052152252352452552652752852953053153253353453553653753853954054154254354454554654754854955055155255355455555655755855956056156256356456556656756856957057157257357457557657757857958058158258358458558658758858959059159259359459559659759859960060160260360460560660760860961061161261361461561661761861962062162262362462562662762862963063163263363463563663763863964064164264364464564664764864965065165265365465565665765865966066166266366466566666766866967067167267367467567667767867968068168268368468568668768868969069169269369469569669769869970070170270370470570670770870971071171271371471571671771871972072172272372472572672772872973073173273373473573673773873974074174274374474574674774874975075175275375475575675775875976076176276376476576676776876977077177277377477577677777877978078178278378478578678778878979079179279379479579679779879980080180280380480580680780880981081181281381481581681781881982082182282382482582682782882983083183283383483583683783883984084184284384484584684784884985085185285385485585685785885986086186286386486586686786886987087187287387487587687787887988088188288388488588688788888989089189289389489589689789889990090190290390490590690790890991091191291391491591691791891992092192292392492592692792892993093193293393493593693793893994094194294394494594694794894995095195295395495595695795895996096196296396496596696796896997097197297397497597697797897998098198298398498598698798898999099199299399499599699799899910001001100210031004100510061007100810091010101110121013101410151016101710181019102010211022102310241025102610271028102910301031103210331034103510361037103810391040104110421043104410451046104710481049105010511052105310541055105610571058105910601061106210631064106510661067106810691070107110721073107410751076107710781079108010811082108310841085108610871088108910901091109210931094109510961097109810991100110111021103110411051106110711081109111011111112111311141115111611171118111911201121112211231124112511261127112811291130113111321133113411351136113711381139114011411142114311441145114611471148114911501151115211531154115511561157115811591160116111621163116411651166116711681169117011711172117311741175117611771178117911801181118211831184118511861187118811891190119111921193119411951196119711981199120012011202120312041205120612071208120912101211121212131214121512161217121812191220122112221223122412251226122712281229123012311232123312341235123612371238123912401241124212431244124512461247124812491250125112521253125412551256125712581259126012611262126312641265126612671268126912701271127212731274127512761277127812791280128112821283128412851286128712881289129012911292129312941295129612971298129913001301130213031304130513061307130813091310131113121313131413151316131713181319132013211322132313241325132613271328132913301331133213331334133513361337133813391340134113421343134413451346134713481349135013511352135313541355135613571358135913601361136213631364136513661367136813691370137113721373137413751376137713781379138013811382138313841385138613871388138913901391139213931394139513961397139813991400140114021403140414051406140714081409141014111412141314141415141614171418141914201421142214231424142514261427142814291430143114321433143414351436143714381439144014411442144314441445144614471448144914501451145214531454145514561457145814591460146114621463146414651466146714681469147014711472147314741475147614771478147914801481148214831484148514861487148814891490149114921493149414951496149714981499150015011502150315041505150615071508150915101511151215131514151515161517151815191520152115221523152415251526152715281529153015311532153315341535153615371538153915401541154215431544154515461547154815491550155115521553155415551556155715581559156015611562156315641565156615671568156915701571157215731574157515761577157815791580158115821583158415851586158715881589159015911592159315941595159615971598159916001601160216031604160516061607160816091610161116121613161416151616161716181619162016211622162316241625162616271628162916301631163216331634163516361637163816391640164116421643164416451646164716481649165016511652165316541655165616571658165916601661166216631664166516661667166816691670167116721673167416751676167716781679168016811682168316841685168616871688168916901691169216931694169516961697169816991700170117021703170417051706170717081709171017111712171317141715171617171718171917201721172217231724172517261727172817291730173117321733173417351736173717381739174017411742174317441745174617471748174917501751175217531754175517561757175817591760176117621763176417651766176717681769177017711772177317741775177617771778177917801781178217831784178517861787178817891790179117921793179417951796179717981799180018011802180318041805180618071808180918101811181218131814181518161817181818191820182118221823182418251826182718281829183018311832183318341835183618371838183918401841184218431844184518461847184818491850185118521853185418551856185718581859186018611862186318641865186618671868186918701871187218731874187518761877187818791880188118821883188418851886188718881889189018911892189318941895189618971898189919001901190219031904190519061907190819091910191119121913191419151916191719181919192019211922192319241925192619271928192919301931193219331934193519361937193819391940194119421943194419451946194719481949195019511952195319541955195619571958195919601961196219631964196519661967196819691970197119721973197419751976197719781979198019811982198319841985198619871988198919901991199219931994199519961997199819992000200120022003200420052006200720082009201020112012201320142015201620172018201920202021202220232024202520262027202820292030203120322033203420352036203720382039204020412042204320442045204620472048204920502051205220532054205520562057205820592060206120622063206420652066206720682069207020712072207320742075207620772078207920802081208220832084208520862087208820892090209120922093209420952096209720982099210021012102210321042105210621072108210921102111211221132114211521162117211821192120212121222123212421252126212721282129213021312132213321342135213621372138213921402141214221432144214521462147214821492150215121522153215421552156215721582159216021612162216321642165216621672168216921702171217221732174217521762177217821792180218121822183218421852186218721882189219021912192219321942195219621972198219922002201220222032204220522062207220822092210221122122213221422152216221722182219222022212222222322242225222622272228222922302231223222332234223522362237223822392240224122422243224422452246224722482249225022512252225322542255225622572258225922602261226222632264226522662267226822692270227122722273227422752276227722782279228022812282228322842285228622872288228922902291229222932294229522962297229822992300230123022303230423052306230723082309231023112312231323142315231623172318231923202321232223232324232523262327232823292330233123322333233423352336233723382339234023412342234323442345234623472348234923502351235223532354235523562357235823592360236123622363236423652366236723682369237023712372237323742375237623772378237923802381238223832384238523862387238823892390239123922393239423952396239723982399240024012402240324042405240624072408240924102411241224132414241524162417241824192420242124222423242424252426242724282429243024312432243324342435243624372438243924402441244224432444244524462447244824492450245124522453245424552456245724582459246024612462246324642465246624672468246924702471247224732474247524762477247824792480248124822483248424852486248724882489249024912492249324942495249624972498249925002501250225032504250525062507250825092510251125122513251425152516251725182519252025212522252325242525252625272528252925302531253225332534253525362537253825392540254125422543254425452546254725482549255025512552255325542555255625572558255925602561256225632564256525662567256825692570257125722573257425752576257725782579258025812582258325842585258625872588258925902591259225932594259525962597259825992600260126022603260426052606260726082609261026112612261326142615261626172618261926202621262226232624262526262627262826292630263126322633263426352636263726382639264026412642264326442645264626472648264926502651265226532654265526562657265826592660266126622663266426652666266726682669267026712672267326742675267626772678267926802681268226832684268526862687268826892690269126922693269426952696269726982699270027012702270327042705270627072708270927102711271227132714271527162717271827192720272127222723272427252726272727282729273027312732273327342735273627372738273927402741274227432744274527462747274827492750275127522753275427552756275727582759276027612762276327642765276627672768276927702771277227732774277527762777277827792780278127822783278427852786278727882789279027912792279327942795279627972798279928002801280228032804280528062807280828092810281128122813281428152816281728182819282028212822282328242825282628272828282928302831283228332834283528362837283828392840284128422843284428452846284728482849285028512852285328542855285628572858285928602861286228632864286528662867286828692870287128722873287428752876287728782879288028812882288328842885288628872888288928902891289228932894289528962897289828992900290129022903290429052906290729082909291029112912291329142915291629172918291929202921292229232924292529262927292829292930293129322933293429352936293729382939294029412942294329442945294629472948294929502951295229532954295529562957295829592960296129622963296429652966296729682969297029712972297329742975297629772978297929802981298229832984298529862987298829892990299129922993299429952996299729982999300030013002300330043005300630073008300930103011301230133014301530163017301830193020302130223023302430253026302730283029303030313032303330343035303630373038303930403041304230433044304530463047304830493050305130523053305430553056305730583059306030613062306330643065306630673068306930703071307230733074307530763077307830793080308130823083308430853086308730883089309030913092309330943095309630973098309931003101310231033104310531063107310831093110311131123113311431153116311731183119312031213122312331243125312631273128312931303131313231333134313531363137313831393140314131423143314431453146314731483149315031513152315331543155315631573158315931603161316231633164316531663167316831693170317131723173317431753176317731783179318031813182318331843185318631873188318931903191319231933194319531963197319831993200320132023203320432053206320732083209321032113212321332143215321632173218321932203221322232233224322532263227322832293230323132323233323432353236323732383239324032413242324332443245324632473248324932503251325232533254325532563257325832593260326132623263326432653266326732683269327032713272327332743275327632773278327932803281328232833284328532863287328832893290329132923293329432953296329732983299330033013302330333043305330633073308330933103311331233133314331533163317331833193320332133223323332433253326332733283329333033313332333333343335333633373338333933403341334233433344334533463347334833493350335133523353335433553356335733583359336033613362336333643365336633673368336933703371337233733374337533763377337833793380338133823383338433853386338733883389339033913392339333943395339633973398339934003401340234033404340534063407340834093410341134123413341434153416341734183419342034213422342334243425342634273428342934303431343234333434343534363437343834393440344134423443344434453446344734483449345034513452345334543455345634573458345934603461346234633464346534663467346834693470347134723473347434753476347734783479348034813482348334843485348634873488348934903491349234933494349534963497349834993500350135023503350435053506350735083509351035113512351335143515351635173518351935203521352235233524352535263527352835293530353135323533353435353536353735383539354035413542354335443545354635473548354935503551355235533554355535563557355835593560356135623563356435653566356735683569357035713572357335743575357635773578357935803581358235833584358535863587358835893590359135923593359435953596359735983599360036013602360336043605360636073608360936103611361236133614361536163617361836193620362136223623362436253626362736283629363036313632363336343635363636373638363936403641364236433644364536463647364836493650365136523653365436553656365736583659366036613662366336643665366636673668366936703671367236733674367536763677367836793680368136823683368436853686368736883689369036913692369336943695369636973698369937003701370237033704370537063707370837093710371137123713371437153716371737183719372037213722372337243725372637273728372937303731373237333734373537363737373837393740374137423743374437453746374737483749375037513752375337543755375637573758375937603761376237633764376537663767376837693770377137723773377437753776377737783779378037813782378337843785378637873788378937903791379237933794379537963797379837993800380138023803380438053806380738083809381038113812381338143815381638173818381938203821382238233824382538263827382838293830383138323833383438353836383738383839384038413842384338443845384638473848384938503851385238533854385538563857385838593860386138623863386438653866386738683869387038713872387338743875387638773878387938803881388238833884388538863887388838893890389138923893389438953896389738983899390039013902390339043905390639073908390939103911391239133914391539163917391839193920392139223923392439253926392739283929393039313932393339343935393639373938393939403941394239433944394539463947394839493950395139523953395439553956395739583959396039613962396339643965396639673968396939703971397239733974397539763977397839793980398139823983398439853986398739883989399039913992399339943995399639973998399940004001400240034004400540064007400840094010401140124013401440154016401740184019402040214022402340244025402640274028402940304031403240334034403540364037403840394040404140424043404440454046404740484049405040514052405340544055405640574058405940604061406240634064406540664067406840694070407140724073407440754076407740784079408040814082408340844085408640874088408940904091409240934094409540964097409840994100410141024103410441054106410741084109411041114112411341144115411641174118411941204121412241234124412541264127412841294130413141324133413441354136413741384139414041414142414341444145414641474148414941504151415241534154415541564157415841594160416141624163416441654166416741684169417041714172417341744175417641774178417941804181418241834184418541864187418841894190419141924193419441954196419741984199420042014202420342044205420642074208420942104211421242134214421542164217421842194220422142224223422442254226422742284229423042314232423342344235423642374238423942404241424242434244424542464247424842494250425142524253425442554256425742584259426042614262426342644265426642674268426942704271427242734274427542764277427842794280428142824283428442854286428742884289429042914292429342944295429642974298429943004301430243034304430543064307430843094310431143124313431443154316431743184319432043214322432343244325432643274328432943304331433243334334433543364337433843394340434143424343434443454346434743484349435043514352435343544355435643574358435943604361436243634364436543664367436843694370437143724373437443754376437743784379438043814382438343844385438643874388438943904391439243934394439543964397439843994400440144024403440444054406440744084409441044114412441344144415441644174418441944204421442244234424442544264427442844294430443144324433443444354436443744384439444044414442444344444445444644474448444944504451445244534454445544564457445844594460446144624463446444654466446744684469447044714472447344744475447644774478447944804481448244834484448544864487448844894490449144924493449444954496449744984499450045014502450345044505450645074508450945104511451245134514451545164517451845194520452145224523452445254526452745284529453045314532453345344535453645374538453945404541454245434544454545464547454845494550455145524553455445554556455745584559456045614562456345644565456645674568456945704571457245734574457545764577457845794580458145824583458445854586458745884589459045914592459345944595459645974598459946004601460246034604460546064607460846094610461146124613461446154616461746184619462046214622462346244625462646274628462946304631463246334634463546364637463846394640464146424643464446454646464746484649465046514652465346544655465646574658465946604661466246634664466546664667466846694670467146724673467446754676467746784679468046814682468346844685468646874688468946904691469246934694469546964697469846994700470147024703470447054706470747084709471047114712471347144715471647174718471947204721472247234724472547264727472847294730473147324733473447354736473747384739474047414742474347444745474647474748474947504751475247534754475547564757475847594760476147624763476447654766476747684769477047714772477347744775477647774778477947804781478247834784478547864787478847894790479147924793479447954796479747984799480048014802480348044805480648074808480948104811481248134814481548164817481848194820482148224823482448254826482748284829483048314832483348344835483648374838483948404841484248434844484548464847484848494850485148524853485448554856485748584859486048614862486348644865486648674868486948704871487248734874487548764877487848794880488148824883488448854886488748884889489048914892489348944895489648974898489949004901490249034904490549064907490849094910491149124913491449154916491749184919492049214922492349244925492649274928492949304931493249334934493549364937493849394940494149424943494449454946494749484949495049514952495349544955495649574958495949604961496249634964496549664967496849694970497149724973497449754976497749784979498049814982498349844985498649874988498949904991499249934994499549964997499849995000500150025003500450055006500750085009501050115012501350145015501650175018501950205021502250235024502550265027502850295030503150325033503450355036503750385039504050415042504350445045504650475048504950505051505250535054505550565057505850595060506150625063506450655066506750685069507050715072507350745075507650775078507950805081508250835084508550865087508850895090509150925093509450955096509750985099510051015102510351045105510651075108510951105111511251135114511551165117511851195120512151225123512451255126512751285129513051315132513351345135513651375138513951405141514251435144514551465147514851495150515151525153515451555156515751585159516051615162516351645165516651675168516951705171517251735174517551765177517851795180518151825183518451855186518751885189519051915192519351945195519651975198519952005201520252035204520552065207520852095210521152125213521452155216521752185219522052215222522352245225522652275228522952305231523252335234523552365237523852395240524152425243524452455246524752485249525052515252525352545255525652575258525952605261526252635264526552665267526852695270527152725273527452755276527752785279528052815282528352845285528652875288528952905291529252935294529552965297529852995300530153025303530453055306530753085309531053115312531353145315531653175318531953205321532253235324532553265327532853295330533153325333533453355336533753385339534053415342534353445345534653475348534953505351535253535354535553565357535853595360536153625363536453655366536753685369537053715372537353745375537653775378537953805381538253835384538553865387538853895390539153925393539453955396539753985399540054015402540354045405540654075408540954105411541254135414541554165417541854195420542154225423542454255426542754285429543054315432543354345435543654375438543954405441544254435444544554465447544854495450545154525453545454555456545754585459546054615462546354645465546654675468546954705471547254735474547554765477547854795480548154825483548454855486548754885489549054915492549354945495549654975498549955005501550255035504550555065507550855095510551155125513551455155516551755185519552055215522552355245525552655275528552955305531553255335534553555365537553855395540554155425543554455455546554755485549555055515552555355545555555655575558555955605561556255635564556555665567556855695570557155725573557455755576557755785579558055815582558355845585558655875588558955905591559255935594559555965597559855995600560156025603560456055606560756085609561056115612561356145615561656175618561956205621562256235624562556265627562856295630563156325633563456355636563756385639564056415642564356445645564656475648564956505651565256535654565556565657565856595660566156625663566456655666566756685669567056715672567356745675567656775678567956805681568256835684568556865687568856895690569156925693569456955696569756985699570057015702570357045705570657075708570957105711571257135714571557165717571857195720572157225723572457255726572757285729573057315732573357345735573657375738573957405741574257435744574557465747574857495750575157525753575457555756575757585759576057615762576357645765576657675768576957705771577257735774577557765777577857795780578157825783578457855786578757885789579057915792579357945795579657975798579958005801580258035804580558065807580858095810581158125813581458155816581758185819582058215822582358245825582658275828582958305831583258335834583558365837583858395840584158425843584458455846584758485849585058515852585358545855585658575858585958605861586258635864586558665867586858695870587158725873587458755876587758785879588058815882588358845885588658875888588958905891589258935894589558965897589858995900590159025903590459055906590759085909591059115912591359145915591659175918591959205921592259235924592559265927592859295930593159325933593459355936593759385939594059415942594359445945594659475948594959505951595259535954595559565957595859595960596159625963596459655966596759685969597059715972597359745975597659775978597959805981598259835984598559865987598859895990599159925993599459955996599759985999600060016002600360046005600660076008600960106011601260136014601560166017601860196020602160226023602460256026602760286029603060316032603360346035603660376038603960406041604260436044604560466047604860496050605160526053605460556056605760586059606060616062606360646065606660676068606960706071607260736074607560766077607860796080608160826083608460856086608760886089609060916092609360946095609660976098609961006101610261036104610561066107610861096110611161126113611461156116611761186119612061216122612361246125612661276128612961306131613261336134613561366137613861396140614161426143614461456146614761486149615061516152615361546155615661576158615961606161616261636164616561666167616861696170617161726173617461756176617761786179618061816182618361846185618661876188618961906191619261936194619561966197619861996200620162026203620462056206620762086209621062116212621362146215621662176218621962206221622262236224622562266227622862296230623162326233623462356236623762386239624062416242624362446245624662476248624962506251625262536254625562566257625862596260626162626263626462656266626762686269627062716272627362746275627662776278627962806281628262836284628562866287628862896290629162926293629462956296629762986299630063016302630363046305630663076308630963106311631263136314631563166317631863196320632163226323632463256326632763286329633063316332633363346335633663376338633963406341634263436344634563466347634863496350635163526353635463556356635763586359636063616362636363646365636663676368636963706371637263736374637563766377637863796380638163826383638463856386638763886389639063916392639363946395639663976398639964006401640264036404640564066407640864096410641164126413641464156416641764186419642064216422642364246425642664276428642964306431643264336434643564366437643864396440644164426443644464456446644764486449645064516452645364546455645664576458645964606461646264636464646564666467646864696470647164726473647464756476647764786479648064816482648364846485648664876488648964906491649264936494649564966497649864996500650165026503650465056506650765086509651065116512651365146515651665176518651965206521652265236524652565266527652865296530653165326533653465356536653765386539654065416542654365446545654665476548654965506551655265536554655565566557655865596560656165626563656465656566656765686569657065716572657365746575657665776578657965806581658265836584658565866587658865896590659165926593659465956596659765986599660066016602660366046605660666076608660966106611661266136614661566166617661866196620662166226623662466256626662766286629663066316632663366346635663666376638663966406641664266436644664566466647664866496650665166526653665466556656665766586659666066616662666366646665666666676668666966706671667266736674667566766677667866796680668166826683668466856686668766886689669066916692669366946695669666976698669967006701670267036704670567066707670867096710671167126713671467156716671767186719672067216722672367246725672667276728672967306731673267336734673567366737673867396740674167426743674467456746674767486749675067516752675367546755675667576758675967606761676267636764676567666767676867696770677167726773677467756776677767786779678067816782678367846785678667876788678967906791679267936794679567966797679867996800680168026803680468056806680768086809681068116812681368146815681668176818681968206821682268236824682568266827682868296830683168326833683468356836683768386839684068416842684368446845684668476848684968506851685268536854685568566857685868596860686168626863686468656866686768686869687068716872687368746875687668776878687968806881688268836884688568866887688868896890689168926893689468956896689768986899690069016902690369046905690669076908690969106911691269136914691569166917691869196920692169226923692469256926692769286929693069316932693369346935693669376938693969406941694269436944694569466947694869496950695169526953695469556956695769586959696069616962696369646965696669676968696969706971697269736974697569766977697869796980698169826983698469856986698769886989699069916992699369946995699669976998699970007001700270037004700570067007700870097010701170127013701470157016701770187019702070217022702370247025702670277028702970307031703270337034703570367037703870397040704170427043704470457046704770487049705070517052705370547055705670577058705970607061706270637064706570667067706870697070707170727073707470757076707770787079708070817082708370847085708670877088708970907091709270937094709570967097709870997100710171027103710471057106710771087109711071117112711371147115711671177118711971207121712271237124712571267127712871297130713171327133713471357136713771387139714071417142714371447145714671477148714971507151715271537154715571567157715871597160716171627163716471657166716771687169717071717172717371747175717671777178717971807181718271837184718571867187718871897190719171927193719471957196719771987199720072017202720372047205720672077208720972107211721272137214721572167217721872197220722172227223722472257226722772287229723072317232723372347235723672377238723972407241724272437244724572467247724872497250725172527253725472557256725772587259726072617262726372647265726672677268726972707271727272737274727572767277727872797280728172827283728472857286728772887289729072917292729372947295729672977298729973007301730273037304730573067307730873097310731173127313731473157316731773187319732073217322732373247325732673277328732973307331733273337334733573367337733873397340734173427343734473457346734773487349735073517352 |
- #ifndef __LINUX_NL80211_H
- #define __LINUX_NL80211_H
- /*
- * 802.11 netlink interface public header
- *
- * Copyright 2006-2010 Johannes Berg <johannes@sipsolutions.net>
- * Copyright 2008 Michael Wu <flamingice@sourmilk.net>
- * Copyright 2008 Luis Carlos Cobo <luisca@cozybit.com>
- * Copyright 2008 Michael Buesch <m@bues.ch>
- * Copyright 2008, 2009 Luis R. Rodriguez <lrodriguez@atheros.com>
- * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com>
- * Copyright 2008 Colin McCabe <colin@cozybit.com>
- * Copyright 2015-2017 Intel Deutschland GmbH
- * Copyright (C) 2018-2021 Intel Corporation
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
- /*
- * This header file defines the userspace API to the wireless stack. Please
- * be careful not to break things - i.e. don't move anything around or so
- * unless you can demonstrate that it breaks neither API nor ABI.
- *
- * Additions to the API should be accompanied by actual implementations in
- * an upstream driver, so that example implementations exist in case there
- * are ever concerns about the precise semantics of the API or changes are
- * needed, and to ensure that code for dead (no longer implemented) API
- * can actually be identified and removed.
- * Nonetheless, semantics should also be documented carefully in this file.
- */
- #include <linux/types.h>
- #define NL80211_GENL_NAME "nl80211"
- #define NL80211_MULTICAST_GROUP_CONFIG "config"
- #define NL80211_MULTICAST_GROUP_SCAN "scan"
- #define NL80211_MULTICAST_GROUP_REG "regulatory"
- #define NL80211_MULTICAST_GROUP_MLME "mlme"
- #define NL80211_MULTICAST_GROUP_VENDOR "vendor"
- #define NL80211_MULTICAST_GROUP_NAN "nan"
- #define NL80211_MULTICAST_GROUP_TESTMODE "testmode"
- #define NL80211_EDMG_BW_CONFIG_MIN 4
- #define NL80211_EDMG_BW_CONFIG_MAX 15
- #define NL80211_EDMG_CHANNELS_MIN 1
- #define NL80211_EDMG_CHANNELS_MAX 0x3c /* 0b00111100 */
- /**
- * DOC: Station handling
- *
- * Stations are added per interface, but a special case exists with VLAN
- * interfaces. When a station is bound to an AP interface, it may be moved
- * into a VLAN identified by a VLAN interface index (%NL80211_ATTR_STA_VLAN).
- * The station is still assumed to belong to the AP interface it was added
- * to.
- *
- * Station handling varies per interface type and depending on the driver's
- * capabilities.
- *
- * For drivers supporting TDLS with external setup (WIPHY_FLAG_SUPPORTS_TDLS
- * and WIPHY_FLAG_TDLS_EXTERNAL_SETUP), the station lifetime is as follows:
- * - a setup station entry is added, not yet authorized, without any rate
- * or capability information, this just exists to avoid race conditions
- * - when the TDLS setup is done, a single NL80211_CMD_SET_STATION is valid
- * to add rate and capability information to the station and at the same
- * time mark it authorized.
- * - %NL80211_TDLS_ENABLE_LINK is then used
- * - after this, the only valid operation is to remove it by tearing down
- * the TDLS link (%NL80211_TDLS_DISABLE_LINK)
- *
- * TODO: need more info for other interface types
- */
- /**
- * DOC: Frame transmission/registration support
- *
- * Frame transmission and registration support exists to allow userspace
- * management entities such as wpa_supplicant react to management frames
- * that are not being handled by the kernel. This includes, for example,
- * certain classes of action frames that cannot be handled in the kernel
- * for various reasons.
- *
- * Frame registration is done on a per-interface basis and registrations
- * cannot be removed other than by closing the socket. It is possible to
- * specify a registration filter to register, for example, only for a
- * certain type of action frame. In particular with action frames, those
- * that userspace registers for will not be returned as unhandled by the
- * driver, so that the registered application has to take responsibility
- * for doing that.
- *
- * The type of frame that can be registered for is also dependent on the
- * driver and interface type. The frame types are advertised in wiphy
- * attributes so applications know what to expect.
- *
- * NOTE: When an interface changes type while registrations are active,
- * these registrations are ignored until the interface type is
- * changed again. This means that changing the interface type can
- * lead to a situation that couldn't otherwise be produced, but
- * any such registrations will be dormant in the sense that they
- * will not be serviced, i.e. they will not receive any frames.
- *
- * Frame transmission allows userspace to send for example the required
- * responses to action frames. It is subject to some sanity checking,
- * but many frames can be transmitted. When a frame was transmitted, its
- * status is indicated to the sending socket.
- *
- * For more technical details, see the corresponding command descriptions
- * below.
- */
- /**
- * DOC: Virtual interface / concurrency capabilities
- *
- * Some devices are able to operate with virtual MACs, they can have
- * more than one virtual interface. The capability handling for this
- * is a bit complex though, as there may be a number of restrictions
- * on the types of concurrency that are supported.
- *
- * To start with, each device supports the interface types listed in
- * the %NL80211_ATTR_SUPPORTED_IFTYPES attribute, but by listing the
- * types there no concurrency is implied.
- *
- * Once concurrency is desired, more attributes must be observed:
- * To start with, since some interface types are purely managed in
- * software, like the AP-VLAN type in mac80211 for example, there's
- * an additional list of these, they can be added at any time and
- * are only restricted by some semantic restrictions (e.g. AP-VLAN
- * cannot be added without a corresponding AP interface). This list
- * is exported in the %NL80211_ATTR_SOFTWARE_IFTYPES attribute.
- *
- * Further, the list of supported combinations is exported. This is
- * in the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute. Basically,
- * it exports a list of "groups", and at any point in time the
- * interfaces that are currently active must fall into any one of
- * the advertised groups. Within each group, there are restrictions
- * on the number of interfaces of different types that are supported
- * and also the number of different channels, along with potentially
- * some other restrictions. See &enum nl80211_if_combination_attrs.
- *
- * All together, these attributes define the concurrency of virtual
- * interfaces that a given device supports.
- */
- /**
- * DOC: packet coalesce support
- *
- * In most cases, host that receives IPv4 and IPv6 multicast/broadcast
- * packets does not do anything with these packets. Therefore the
- * reception of these unwanted packets causes unnecessary processing
- * and power consumption.
- *
- * Packet coalesce feature helps to reduce number of received interrupts
- * to host by buffering these packets in firmware/hardware for some
- * predefined time. Received interrupt will be generated when one of the
- * following events occur.
- * a) Expiration of hardware timer whose expiration time is set to maximum
- * coalescing delay of matching coalesce rule.
- * b) Coalescing buffer in hardware reaches it's limit.
- * c) Packet doesn't match any of the configured coalesce rules.
- *
- * User needs to configure following parameters for creating a coalesce
- * rule.
- * a) Maximum coalescing delay
- * b) List of packet patterns which needs to be matched
- * c) Condition for coalescence. pattern 'match' or 'no match'
- * Multiple such rules can be created.
- */
- /**
- * DOC: WPA/WPA2 EAPOL handshake offload
- *
- * By setting @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK flag drivers
- * can indicate they support offloading EAPOL handshakes for WPA/WPA2
- * preshared key authentication in station mode. In %NL80211_CMD_CONNECT
- * the preshared key should be specified using %NL80211_ATTR_PMK. Drivers
- * supporting this offload may reject the %NL80211_CMD_CONNECT when no
- * preshared key material is provided, for example when that driver does
- * not support setting the temporal keys through %NL80211_CMD_NEW_KEY.
- *
- * Similarly @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X flag can be
- * set by drivers indicating offload support of the PTK/GTK EAPOL
- * handshakes during 802.1X authentication in station mode. In order to
- * use the offload the %NL80211_CMD_CONNECT should have
- * %NL80211_ATTR_WANT_1X_4WAY_HS attribute flag. Drivers supporting this
- * offload may reject the %NL80211_CMD_CONNECT when the attribute flag is
- * not present.
- *
- * By setting @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_AP_PSK flag drivers
- * can indicate they support offloading EAPOL handshakes for WPA/WPA2
- * preshared key authentication in AP mode. In %NL80211_CMD_START_AP
- * the preshared key should be specified using %NL80211_ATTR_PMK. Drivers
- * supporting this offload may reject the %NL80211_CMD_START_AP when no
- * preshared key material is provided, for example when that driver does
- * not support setting the temporal keys through %NL80211_CMD_NEW_KEY.
- *
- * For 802.1X the PMK or PMK-R0 are set by providing %NL80211_ATTR_PMK
- * using %NL80211_CMD_SET_PMK. For offloaded FT support also
- * %NL80211_ATTR_PMKR0_NAME must be provided.
- */
- /**
- * DOC: FILS shared key authentication offload
- *
- * FILS shared key authentication offload can be advertized by drivers by
- * setting @NL80211_EXT_FEATURE_FILS_SK_OFFLOAD flag. The drivers that support
- * FILS shared key authentication offload should be able to construct the
- * authentication and association frames for FILS shared key authentication and
- * eventually do a key derivation as per IEEE 802.11ai. The below additional
- * parameters should be given to driver in %NL80211_CMD_CONNECT and/or in
- * %NL80211_CMD_UPDATE_CONNECT_PARAMS.
- * %NL80211_ATTR_FILS_ERP_USERNAME - used to construct keyname_nai
- * %NL80211_ATTR_FILS_ERP_REALM - used to construct keyname_nai
- * %NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM - used to construct erp message
- * %NL80211_ATTR_FILS_ERP_RRK - used to generate the rIK and rMSK
- * rIK should be used to generate an authentication tag on the ERP message and
- * rMSK should be used to derive a PMKSA.
- * rIK, rMSK should be generated and keyname_nai, sequence number should be used
- * as specified in IETF RFC 6696.
- *
- * When FILS shared key authentication is completed, driver needs to provide the
- * below additional parameters to userspace, which can be either after setting
- * up a connection or after roaming.
- * %NL80211_ATTR_FILS_KEK - used for key renewal
- * %NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM - used in further EAP-RP exchanges
- * %NL80211_ATTR_PMKID - used to identify the PMKSA used/generated
- * %Nl80211_ATTR_PMK - used to update PMKSA cache in userspace
- * The PMKSA can be maintained in userspace persistently so that it can be used
- * later after reboots or wifi turn off/on also.
- *
- * %NL80211_ATTR_FILS_CACHE_ID is the cache identifier advertized by a FILS
- * capable AP supporting PMK caching. It specifies the scope within which the
- * PMKSAs are cached in an ESS. %NL80211_CMD_SET_PMKSA and
- * %NL80211_CMD_DEL_PMKSA are enhanced to allow support for PMKSA caching based
- * on FILS cache identifier. Additionally %NL80211_ATTR_PMK is used with
- * %NL80211_SET_PMKSA to specify the PMK corresponding to a PMKSA for driver to
- * use in a FILS shared key connection with PMKSA caching.
- */
- /**
- * DOC: SAE authentication offload
- *
- * By setting @NL80211_EXT_FEATURE_SAE_OFFLOAD flag drivers can indicate they
- * support offloading SAE authentication for WPA3-Personal networks in station
- * mode. Similarly @NL80211_EXT_FEATURE_SAE_OFFLOAD_AP flag can be set by
- * drivers indicating the offload support in AP mode.
- *
- * The password for SAE should be specified using %NL80211_ATTR_SAE_PASSWORD in
- * %NL80211_CMD_CONNECT and %NL80211_CMD_START_AP for station and AP mode
- * respectively.
- */
- /**
- * DOC: VLAN offload support for setting group keys and binding STAs to VLANs
- *
- * By setting @NL80211_EXT_FEATURE_VLAN_OFFLOAD flag drivers can indicate they
- * support offloading VLAN functionality in a manner where the driver exposes a
- * single netdev that uses VLAN tagged frames and separate VLAN-specific netdevs
- * can then be added using RTM_NEWLINK/IFLA_VLAN_ID similarly to the Ethernet
- * case. Frames received from stations that are not assigned to any VLAN are
- * delivered on the main netdev and frames to such stations can be sent through
- * that main netdev.
- *
- * %NL80211_CMD_NEW_KEY (for group keys), %NL80211_CMD_NEW_STATION, and
- * %NL80211_CMD_SET_STATION will optionally specify vlan_id using
- * %NL80211_ATTR_VLAN_ID.
- */
- /**
- * DOC: TID configuration
- *
- * TID config support can be checked in the %NL80211_ATTR_TID_CONFIG
- * attribute given in wiphy capabilities.
- *
- * The necessary configuration parameters are mentioned in
- * &enum nl80211_tid_config_attr and it will be passed to the
- * %NL80211_CMD_SET_TID_CONFIG command in %NL80211_ATTR_TID_CONFIG.
- *
- * If the configuration needs to be applied for specific peer then the MAC
- * address of the peer needs to be passed in %NL80211_ATTR_MAC, otherwise the
- * configuration will be applied for all the connected peers in the vif except
- * any peers that have peer specific configuration for the TID by default; if
- * the %NL80211_TID_CONFIG_ATTR_OVERRIDE flag is set, peer specific values
- * will be overwritten.
- *
- * All this configuration is valid only for STA's current connection
- * i.e. the configuration will be reset to default when the STA connects back
- * after disconnection/roaming, and this configuration will be cleared when
- * the interface goes down.
- */
- /**
- * enum nl80211_commands - supported nl80211 commands
- *
- * @NL80211_CMD_UNSPEC: unspecified command to catch errors
- *
- * @NL80211_CMD_GET_WIPHY: request information about a wiphy or dump request
- * to get a list of all present wiphys.
- * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or
- * %NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME,
- * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ,
- * %NL80211_ATTR_WIPHY_FREQ_OFFSET (and the attributes determining the
- * channel width; this is used for setting monitor mode channel),
- * %NL80211_ATTR_WIPHY_RETRY_SHORT, %NL80211_ATTR_WIPHY_RETRY_LONG,
- * %NL80211_ATTR_WIPHY_FRAG_THRESHOLD, and/or
- * %NL80211_ATTR_WIPHY_RTS_THRESHOLD. However, for setting the channel,
- * see %NL80211_CMD_SET_CHANNEL instead, the support here is for backward
- * compatibility only.
- * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request
- * or rename notification. Has attributes %NL80211_ATTR_WIPHY and
- * %NL80211_ATTR_WIPHY_NAME.
- * @NL80211_CMD_DEL_WIPHY: Wiphy deleted. Has attributes
- * %NL80211_ATTR_WIPHY and %NL80211_ATTR_WIPHY_NAME.
- *
- * @NL80211_CMD_GET_INTERFACE: Request an interface's configuration;
- * either a dump request for all interfaces or a specific get with a
- * single %NL80211_ATTR_IFINDEX is supported.
- * @NL80211_CMD_SET_INTERFACE: Set type of a virtual interface, requires
- * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_IFTYPE.
- * @NL80211_CMD_NEW_INTERFACE: Newly created virtual interface or response
- * to %NL80211_CMD_GET_INTERFACE. Has %NL80211_ATTR_IFINDEX,
- * %NL80211_ATTR_WIPHY and %NL80211_ATTR_IFTYPE attributes. Can also
- * be sent from userspace to request creation of a new virtual interface,
- * then requires attributes %NL80211_ATTR_WIPHY, %NL80211_ATTR_IFTYPE and
- * %NL80211_ATTR_IFNAME.
- * @NL80211_CMD_DEL_INTERFACE: Virtual interface was deleted, has attributes
- * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_WIPHY. Can also be sent from
- * userspace to request deletion of a virtual interface, then requires
- * attribute %NL80211_ATTR_IFINDEX.
- *
- * @NL80211_CMD_GET_KEY: Get sequence counter information for a key specified
- * by %NL80211_ATTR_KEY_IDX and/or %NL80211_ATTR_MAC.
- * @NL80211_CMD_SET_KEY: Set key attributes %NL80211_ATTR_KEY_DEFAULT,
- * %NL80211_ATTR_KEY_DEFAULT_MGMT, or %NL80211_ATTR_KEY_THRESHOLD.
- * @NL80211_CMD_NEW_KEY: add a key with given %NL80211_ATTR_KEY_DATA,
- * %NL80211_ATTR_KEY_IDX, %NL80211_ATTR_MAC, %NL80211_ATTR_KEY_CIPHER,
- * and %NL80211_ATTR_KEY_SEQ attributes.
- * @NL80211_CMD_DEL_KEY: delete a key identified by %NL80211_ATTR_KEY_IDX
- * or %NL80211_ATTR_MAC.
- *
- * @NL80211_CMD_GET_BEACON: (not used)
- * @NL80211_CMD_SET_BEACON: change the beacon on an access point interface
- * using the %NL80211_ATTR_BEACON_HEAD and %NL80211_ATTR_BEACON_TAIL
- * attributes. For drivers that generate the beacon and probe responses
- * internally, the following attributes must be provided: %NL80211_ATTR_IE,
- * %NL80211_ATTR_IE_PROBE_RESP and %NL80211_ATTR_IE_ASSOC_RESP.
- * @NL80211_CMD_START_AP: Start AP operation on an AP interface, parameters
- * are like for %NL80211_CMD_SET_BEACON, and additionally parameters that
- * do not change are used, these include %NL80211_ATTR_BEACON_INTERVAL,
- * %NL80211_ATTR_DTIM_PERIOD, %NL80211_ATTR_SSID,
- * %NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHERS_PAIRWISE,
- * %NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS,
- * %NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY,
- * %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_INACTIVITY_TIMEOUT,
- * %NL80211_ATTR_ACL_POLICY and %NL80211_ATTR_MAC_ADDRS.
- * The channel to use can be set on the interface or be given using the
- * %NL80211_ATTR_WIPHY_FREQ and %NL80211_ATTR_WIPHY_FREQ_OFFSET, and the
- * attributes determining channel width.
- * @NL80211_CMD_NEW_BEACON: old alias for %NL80211_CMD_START_AP
- * @NL80211_CMD_STOP_AP: Stop AP operation on the given interface
- * @NL80211_CMD_DEL_BEACON: old alias for %NL80211_CMD_STOP_AP
- *
- * @NL80211_CMD_GET_STATION: Get station attributes for station identified by
- * %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX.
- * @NL80211_CMD_SET_STATION: Set station attributes for station identified by
- * %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX.
- * @NL80211_CMD_NEW_STATION: Add a station with given attributes to the
- * interface identified by %NL80211_ATTR_IFINDEX.
- * @NL80211_CMD_DEL_STATION: Remove a station identified by %NL80211_ATTR_MAC
- * or, if no MAC address given, all stations, on the interface identified
- * by %NL80211_ATTR_IFINDEX. %NL80211_ATTR_MGMT_SUBTYPE and
- * %NL80211_ATTR_REASON_CODE can optionally be used to specify which type
- * of disconnection indication should be sent to the station
- * (Deauthentication or Disassociation frame and reason code for that
- * frame).
- *
- * @NL80211_CMD_GET_MPATH: Get mesh path attributes for mesh path to
- * destination %NL80211_ATTR_MAC on the interface identified by
- * %NL80211_ATTR_IFINDEX.
- * @NL80211_CMD_SET_MPATH: Set mesh path attributes for mesh path to
- * destination %NL80211_ATTR_MAC on the interface identified by
- * %NL80211_ATTR_IFINDEX.
- * @NL80211_CMD_NEW_MPATH: Create a new mesh path for the destination given by
- * %NL80211_ATTR_MAC via %NL80211_ATTR_MPATH_NEXT_HOP.
- * @NL80211_CMD_DEL_MPATH: Delete a mesh path to the destination given by
- * %NL80211_ATTR_MAC.
- * @NL80211_CMD_NEW_PATH: Add a mesh path with given attributes to the
- * interface identified by %NL80211_ATTR_IFINDEX.
- * @NL80211_CMD_DEL_PATH: Remove a mesh path identified by %NL80211_ATTR_MAC
- * or, if no MAC address given, all mesh paths, on the interface identified
- * by %NL80211_ATTR_IFINDEX.
- * @NL80211_CMD_SET_BSS: Set BSS attributes for BSS identified by
- * %NL80211_ATTR_IFINDEX.
- *
- * @NL80211_CMD_GET_REG: ask the wireless core to send us its currently set
- * regulatory domain. If %NL80211_ATTR_WIPHY is specified and the device
- * has a private regulatory domain, it will be returned. Otherwise, the
- * global regdomain will be returned.
- * A device will have a private regulatory domain if it uses the
- * regulatory_hint() API. Even when a private regdomain is used the channel
- * information will still be mended according to further hints from
- * the regulatory core to help with compliance. A dump version of this API
- * is now available which will returns the global regdomain as well as
- * all private regdomains of present wiphys (for those that have it).
- * If a wiphy is self-managed (%NL80211_ATTR_WIPHY_SELF_MANAGED_REG), then
- * its private regdomain is the only valid one for it. The regulatory
- * core is not used to help with compliance in this case.
- * @NL80211_CMD_SET_REG: Set current regulatory domain. CRDA sends this command
- * after being queried by the kernel. CRDA replies by sending a regulatory
- * domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our
- * current alpha2 if it found a match. It also provides
- * NL80211_ATTR_REG_RULE_FLAGS, and a set of regulatory rules. Each
- * regulatory rule is a nested set of attributes given by
- * %NL80211_ATTR_REG_RULE_FREQ_[START|END] and
- * %NL80211_ATTR_FREQ_RANGE_MAX_BW with an attached power rule given by
- * %NL80211_ATTR_REG_RULE_POWER_MAX_ANT_GAIN and
- * %NL80211_ATTR_REG_RULE_POWER_MAX_EIRP.
- * @NL80211_CMD_REQ_SET_REG: ask the wireless core to set the regulatory domain
- * to the specified ISO/IEC 3166-1 alpha2 country code. The core will
- * store this as a valid request and then query userspace for it.
- *
- * @NL80211_CMD_GET_MESH_CONFIG: Get mesh networking properties for the
- * interface identified by %NL80211_ATTR_IFINDEX
- *
- * @NL80211_CMD_SET_MESH_CONFIG: Set mesh networking properties for the
- * interface identified by %NL80211_ATTR_IFINDEX
- *
- * @NL80211_CMD_SET_MGMT_EXTRA_IE: Set extra IEs for management frames. The
- * interface is identified with %NL80211_ATTR_IFINDEX and the management
- * frame subtype with %NL80211_ATTR_MGMT_SUBTYPE. The extra IE data to be
- * added to the end of the specified management frame is specified with
- * %NL80211_ATTR_IE. If the command succeeds, the requested data will be
- * added to all specified management frames generated by
- * kernel/firmware/driver.
- * Note: This command has been removed and it is only reserved at this
- * point to avoid re-using existing command number. The functionality this
- * command was planned for has been provided with cleaner design with the
- * option to specify additional IEs in NL80211_CMD_TRIGGER_SCAN,
- * NL80211_CMD_AUTHENTICATE, NL80211_CMD_ASSOCIATE,
- * NL80211_CMD_DEAUTHENTICATE, and NL80211_CMD_DISASSOCIATE.
- *
- * @NL80211_CMD_GET_SCAN: get scan results
- * @NL80211_CMD_TRIGGER_SCAN: trigger a new scan with the given parameters
- * %NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the
- * probe requests at CCK rate or not. %NL80211_ATTR_BSSID can be used to
- * specify a BSSID to scan for; if not included, the wildcard BSSID will
- * be used.
- * @NL80211_CMD_NEW_SCAN_RESULTS: scan notification (as a reply to
- * NL80211_CMD_GET_SCAN and on the "scan" multicast group)
- * @NL80211_CMD_SCAN_ABORTED: scan was aborted, for unspecified reasons,
- * partial scan results may be available
- *
- * @NL80211_CMD_START_SCHED_SCAN: start a scheduled scan at certain
- * intervals and certain number of cycles, as specified by
- * %NL80211_ATTR_SCHED_SCAN_PLANS. If %NL80211_ATTR_SCHED_SCAN_PLANS is
- * not specified and only %NL80211_ATTR_SCHED_SCAN_INTERVAL is specified,
- * scheduled scan will run in an infinite loop with the specified interval.
- * These attributes are mutually exculsive,
- * i.e. NL80211_ATTR_SCHED_SCAN_INTERVAL must not be passed if
- * NL80211_ATTR_SCHED_SCAN_PLANS is defined.
- * If for some reason scheduled scan is aborted by the driver, all scan
- * plans are canceled (including scan plans that did not start yet).
- * Like with normal scans, if SSIDs (%NL80211_ATTR_SCAN_SSIDS)
- * are passed, they are used in the probe requests. For
- * broadcast, a broadcast SSID must be passed (ie. an empty
- * string). If no SSID is passed, no probe requests are sent and
- * a passive scan is performed. %NL80211_ATTR_SCAN_FREQUENCIES,
- * if passed, define which channels should be scanned; if not
- * passed, all channels allowed for the current regulatory domain
- * are used. Extra IEs can also be passed from the userspace by
- * using the %NL80211_ATTR_IE attribute. The first cycle of the
- * scheduled scan can be delayed by %NL80211_ATTR_SCHED_SCAN_DELAY
- * is supplied. If the device supports multiple concurrent scheduled
- * scans, it will allow such when the caller provides the flag attribute
- * %NL80211_ATTR_SCHED_SCAN_MULTI to indicate user-space support for it.
- * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT if
- * scheduled scan is not running. The caller may assume that as soon
- * as the call returns, it is safe to start a new scheduled scan again.
- * @NL80211_CMD_SCHED_SCAN_RESULTS: indicates that there are scheduled scan
- * results available.
- * @NL80211_CMD_SCHED_SCAN_STOPPED: indicates that the scheduled scan has
- * stopped. The driver may issue this event at any time during a
- * scheduled scan. One reason for stopping the scan is if the hardware
- * does not support starting an association or a normal scan while running
- * a scheduled scan. This event is also sent when the
- * %NL80211_CMD_STOP_SCHED_SCAN command is received or when the interface
- * is brought down while a scheduled scan was running.
- *
- * @NL80211_CMD_GET_SURVEY: get survey resuls, e.g. channel occupation
- * or noise level
- * @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to
- * NL80211_CMD_GET_SURVEY and on the "scan" multicast group)
- *
- * @NL80211_CMD_SET_PMKSA: Add a PMKSA cache entry using %NL80211_ATTR_MAC
- * (for the BSSID), %NL80211_ATTR_PMKID, and optionally %NL80211_ATTR_PMK
- * (PMK is used for PTKSA derivation in case of FILS shared key offload) or
- * using %NL80211_ATTR_SSID, %NL80211_ATTR_FILS_CACHE_ID,
- * %NL80211_ATTR_PMKID, and %NL80211_ATTR_PMK in case of FILS
- * authentication where %NL80211_ATTR_FILS_CACHE_ID is the identifier
- * advertized by a FILS capable AP identifying the scope of PMKSA in an
- * ESS.
- * @NL80211_CMD_DEL_PMKSA: Delete a PMKSA cache entry, using %NL80211_ATTR_MAC
- * (for the BSSID) and %NL80211_ATTR_PMKID or using %NL80211_ATTR_SSID,
- * %NL80211_ATTR_FILS_CACHE_ID, and %NL80211_ATTR_PMKID in case of FILS
- * authentication.
- * @NL80211_CMD_FLUSH_PMKSA: Flush all PMKSA cache entries.
- *
- * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain
- * has been changed and provides details of the request information
- * that caused the change such as who initiated the regulatory request
- * (%NL80211_ATTR_REG_INITIATOR), the wiphy_idx
- * (%NL80211_ATTR_REG_ALPHA2) on which the request was made from if
- * the initiator was %NL80211_REGDOM_SET_BY_COUNTRY_IE or
- * %NL80211_REGDOM_SET_BY_DRIVER, the type of regulatory domain
- * set (%NL80211_ATTR_REG_TYPE), if the type of regulatory domain is
- * %NL80211_REG_TYPE_COUNTRY the alpha2 to which we have moved on
- * to (%NL80211_ATTR_REG_ALPHA2).
- * @NL80211_CMD_REG_BEACON_HINT: indicates to userspace that an AP beacon
- * has been found while world roaming thus enabling active scan or
- * any mode of operation that initiates TX (beacons) on a channel
- * where we would not have been able to do either before. As an example
- * if you are world roaming (regulatory domain set to world or if your
- * driver is using a custom world roaming regulatory domain) and while
- * doing a passive scan on the 5 GHz band you find an AP there (if not
- * on a DFS channel) you will now be able to actively scan for that AP
- * or use AP mode on your card on that same channel. Note that this will
- * never be used for channels 1-11 on the 2 GHz band as they are always
- * enabled world wide. This beacon hint is only sent if your device had
- * either disabled active scanning or beaconing on a channel. We send to
- * userspace the wiphy on which we removed a restriction from
- * (%NL80211_ATTR_WIPHY) and the channel on which this occurred
- * before (%NL80211_ATTR_FREQ_BEFORE) and after (%NL80211_ATTR_FREQ_AFTER)
- * the beacon hint was processed.
- *
- * @NL80211_CMD_AUTHENTICATE: authentication request and notification.
- * This command is used both as a command (request to authenticate) and
- * as an event on the "mlme" multicast group indicating completion of the
- * authentication process.
- * When used as a command, %NL80211_ATTR_IFINDEX is used to identify the
- * interface. %NL80211_ATTR_MAC is used to specify PeerSTAAddress (and
- * BSSID in case of station mode). %NL80211_ATTR_SSID is used to specify
- * the SSID (mainly for association, but is included in authentication
- * request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ +
- * %NL80211_ATTR_WIPHY_FREQ_OFFSET is used to specify the frequence of the
- * channel in MHz. %NL80211_ATTR_AUTH_TYPE is used to specify the
- * authentication type. %NL80211_ATTR_IE is used to define IEs
- * (VendorSpecificInfo, but also including RSN IE and FT IEs) to be added
- * to the frame.
- * When used as an event, this reports reception of an Authentication
- * frame in station and IBSS modes when the local MLME processed the
- * frame, i.e., it was for the local STA and was received in correct
- * state. This is similar to MLME-AUTHENTICATE.confirm primitive in the
- * MLME SAP interface (kernel providing MLME, userspace SME). The
- * included %NL80211_ATTR_FRAME attribute contains the management frame
- * (including both the header and frame body, but not FCS). This event is
- * also used to indicate if the authentication attempt timed out. In that
- * case the %NL80211_ATTR_FRAME attribute is replaced with a
- * %NL80211_ATTR_TIMED_OUT flag (and %NL80211_ATTR_MAC to indicate which
- * pending authentication timed out).
- * @NL80211_CMD_ASSOCIATE: association request and notification; like
- * NL80211_CMD_AUTHENTICATE but for Association and Reassociation
- * (similar to MLME-ASSOCIATE.request, MLME-REASSOCIATE.request,
- * MLME-ASSOCIATE.confirm or MLME-REASSOCIATE.confirm primitives). The
- * %NL80211_ATTR_PREV_BSSID attribute is used to specify whether the
- * request is for the initial association to an ESS (that attribute not
- * included) or for reassociation within the ESS (that attribute is
- * included).
- * @NL80211_CMD_DEAUTHENTICATE: deauthentication request and notification; like
- * NL80211_CMD_AUTHENTICATE but for Deauthentication frames (similar to
- * MLME-DEAUTHENTICATION.request and MLME-DEAUTHENTICATE.indication
- * primitives).
- * @NL80211_CMD_DISASSOCIATE: disassociation request and notification; like
- * NL80211_CMD_AUTHENTICATE but for Disassociation frames (similar to
- * MLME-DISASSOCIATE.request and MLME-DISASSOCIATE.indication primitives).
- *
- * @NL80211_CMD_MICHAEL_MIC_FAILURE: notification of a locally detected Michael
- * MIC (part of TKIP) failure; sent on the "mlme" multicast group; the
- * event includes %NL80211_ATTR_MAC to describe the source MAC address of
- * the frame with invalid MIC, %NL80211_ATTR_KEY_TYPE to show the key
- * type, %NL80211_ATTR_KEY_IDX to indicate the key identifier, and
- * %NL80211_ATTR_KEY_SEQ to indicate the TSC value of the frame; this
- * event matches with MLME-MICHAELMICFAILURE.indication() primitive
- *
- * @NL80211_CMD_JOIN_IBSS: Join a new IBSS -- given at least an SSID and a
- * FREQ attribute (for the initial frequency if no peer can be found)
- * and optionally a MAC (as BSSID) and FREQ_FIXED attribute if those
- * should be fixed rather than automatically determined. Can only be
- * executed on a network interface that is UP, and fixed BSSID/FREQ
- * may be rejected. Another optional parameter is the beacon interval,
- * given in the %NL80211_ATTR_BEACON_INTERVAL attribute, which if not
- * given defaults to 100 TU (102.4ms).
- * @NL80211_CMD_LEAVE_IBSS: Leave the IBSS -- no special arguments, the IBSS is
- * determined by the network interface.
- *
- * @NL80211_CMD_TESTMODE: testmode command, takes a wiphy (or ifindex) attribute
- * to identify the device, and the TESTDATA blob attribute to pass through
- * to the driver.
- *
- * @NL80211_CMD_CONNECT: connection request and notification; this command
- * requests to connect to a specified network but without separating
- * auth and assoc steps. For this, you need to specify the SSID in a
- * %NL80211_ATTR_SSID attribute, and can optionally specify the association
- * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE,
- * %NL80211_ATTR_USE_MFP, %NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ,
- * %NL80211_ATTR_WIPHY_FREQ_OFFSET, %NL80211_ATTR_CONTROL_PORT,
- * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE,
- * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT,
- * %NL80211_ATTR_CONTROL_PORT_OVER_NL80211, %NL80211_ATTR_MAC_HINT, and
- * %NL80211_ATTR_WIPHY_FREQ_HINT.
- * If included, %NL80211_ATTR_MAC and %NL80211_ATTR_WIPHY_FREQ are
- * restrictions on BSS selection, i.e., they effectively prevent roaming
- * within the ESS. %NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT
- * can be included to provide a recommendation of the initial BSS while
- * allowing the driver to roam to other BSSes within the ESS and also to
- * ignore this recommendation if the indicated BSS is not ideal. Only one
- * set of BSSID,frequency parameters is used (i.e., either the enforcing
- * %NL80211_ATTR_MAC,%NL80211_ATTR_WIPHY_FREQ or the less strict
- * %NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT).
- * Driver shall not modify the IEs specified through %NL80211_ATTR_IE if
- * %NL80211_ATTR_MAC is included. However, if %NL80211_ATTR_MAC_HINT is
- * included, these IEs through %NL80211_ATTR_IE are specified by the user
- * space based on the best possible BSS selected. Thus, if the driver ends
- * up selecting a different BSS, it can modify these IEs accordingly (e.g.
- * userspace asks the driver to perform PMKSA caching with BSS1 and the
- * driver ends up selecting BSS2 with different PMKSA cache entry; RSNIE
- * has to get updated with the apt PMKID).
- * %NL80211_ATTR_PREV_BSSID can be used to request a reassociation within
- * the ESS in case the device is already associated and an association with
- * a different BSS is desired.
- * Background scan period can optionally be
- * specified in %NL80211_ATTR_BG_SCAN_PERIOD,
- * if not specified default background scan configuration
- * in driver is used and if period value is 0, bg scan will be disabled.
- * This attribute is ignored if driver does not support roam scan.
- * It is also sent as an event, with the BSSID and response IEs when the
- * connection is established or failed to be established. This can be
- * determined by the %NL80211_ATTR_STATUS_CODE attribute (0 = success,
- * non-zero = failure). If %NL80211_ATTR_TIMED_OUT is included in the
- * event, the connection attempt failed due to not being able to initiate
- * authentication/association or not receiving a response from the AP.
- * Non-zero %NL80211_ATTR_STATUS_CODE value is indicated in that case as
- * well to remain backwards compatible.
- * @NL80211_CMD_ROAM: Notification indicating the card/driver roamed by itself.
- * When a security association was established on an 802.1X network using
- * fast transition, this event should be followed by an
- * %NL80211_CMD_PORT_AUTHORIZED event.
- * Following a %NL80211_CMD_ROAM event userspace can issue
- * %NL80211_CMD_GET_SCAN in order to obtain the scan information for the
- * new BSS the card/driver roamed to.
- * @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify
- * userspace that a connection was dropped by the AP or due to other
- * reasons, for this the %NL80211_ATTR_DISCONNECTED_BY_AP and
- * %NL80211_ATTR_REASON_CODE attributes are used.
- *
- * @NL80211_CMD_SET_WIPHY_NETNS: Set a wiphy's netns. Note that all devices
- * associated with this wiphy must be down and will follow.
- *
- * @NL80211_CMD_REMAIN_ON_CHANNEL: Request to remain awake on the specified
- * channel for the specified amount of time. This can be used to do
- * off-channel operations like transmit a Public Action frame and wait for
- * a response while being associated to an AP on another channel.
- * %NL80211_ATTR_IFINDEX is used to specify which interface (and thus
- * radio) is used. %NL80211_ATTR_WIPHY_FREQ is used to specify the
- * frequency for the operation.
- * %NL80211_ATTR_DURATION is used to specify the duration in milliseconds
- * to remain on the channel. This command is also used as an event to
- * notify when the requested duration starts (it may take a while for the
- * driver to schedule this time due to other concurrent needs for the
- * radio).
- * When called, this operation returns a cookie (%NL80211_ATTR_COOKIE)
- * that will be included with any events pertaining to this request;
- * the cookie is also used to cancel the request.
- * @NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL: This command can be used to cancel a
- * pending remain-on-channel duration if the desired operation has been
- * completed prior to expiration of the originally requested duration.
- * %NL80211_ATTR_WIPHY or %NL80211_ATTR_IFINDEX is used to specify the
- * radio. The %NL80211_ATTR_COOKIE attribute must be given as well to
- * uniquely identify the request.
- * This command is also used as an event to notify when a requested
- * remain-on-channel duration has expired.
- *
- * @NL80211_CMD_SET_TX_BITRATE_MASK: Set the mask of rates to be used in TX
- * rate selection. %NL80211_ATTR_IFINDEX is used to specify the interface
- * and @NL80211_ATTR_TX_RATES the set of allowed rates.
- *
- * @NL80211_CMD_REGISTER_FRAME: Register for receiving certain mgmt frames
- * (via @NL80211_CMD_FRAME) for processing in userspace. This command
- * requires an interface index, a frame type attribute (optional for
- * backward compatibility reasons, if not given assumes action frames)
- * and a match attribute containing the first few bytes of the frame
- * that should match, e.g. a single byte for only a category match or
- * four bytes for vendor frames including the OUI. The registration
- * cannot be dropped, but is removed automatically when the netlink
- * socket is closed. Multiple registrations can be made.
- * The %NL80211_ATTR_RECEIVE_MULTICAST flag attribute can be given if
- * %NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS is available, in which
- * case the registration can also be modified to include/exclude the
- * flag, rather than requiring unregistration to change it.
- * @NL80211_CMD_REGISTER_ACTION: Alias for @NL80211_CMD_REGISTER_FRAME for
- * backward compatibility
- * @NL80211_CMD_FRAME: Management frame TX request and RX notification. This
- * command is used both as a request to transmit a management frame and
- * as an event indicating reception of a frame that was not processed in
- * kernel code, but is for us (i.e., which may need to be processed in a
- * user space application). %NL80211_ATTR_FRAME is used to specify the
- * frame contents (including header). %NL80211_ATTR_WIPHY_FREQ is used
- * to indicate on which channel the frame is to be transmitted or was
- * received. If this channel is not the current channel (remain-on-channel
- * or the operational channel) the device will switch to the given channel
- * and transmit the frame, optionally waiting for a response for the time
- * specified using %NL80211_ATTR_DURATION. When called, this operation
- * returns a cookie (%NL80211_ATTR_COOKIE) that will be included with the
- * TX status event pertaining to the TX request.
- * %NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the
- * management frames at CCK rate or not in 2GHz band.
- * %NL80211_ATTR_CSA_C_OFFSETS_TX is an array of offsets to CSA
- * counters which will be updated to the current value. This attribute
- * is used during CSA period.
- * @NL80211_CMD_FRAME_WAIT_CANCEL: When an off-channel TX was requested, this
- * command may be used with the corresponding cookie to cancel the wait
- * time if it is known that it is no longer necessary. This command is
- * also sent as an event whenever the driver has completed the off-channel
- * wait time.
- * @NL80211_CMD_ACTION: Alias for @NL80211_CMD_FRAME for backward compatibility.
- * @NL80211_CMD_FRAME_TX_STATUS: Report TX status of a management frame
- * transmitted with %NL80211_CMD_FRAME. %NL80211_ATTR_COOKIE identifies
- * the TX command and %NL80211_ATTR_FRAME includes the contents of the
- * frame. %NL80211_ATTR_ACK flag is included if the recipient acknowledged
- * the frame.
- * @NL80211_CMD_ACTION_TX_STATUS: Alias for @NL80211_CMD_FRAME_TX_STATUS for
- * backward compatibility.
- *
- * @NL80211_CMD_SET_POWER_SAVE: Set powersave, using %NL80211_ATTR_PS_STATE
- * @NL80211_CMD_GET_POWER_SAVE: Get powersave status in %NL80211_ATTR_PS_STATE
- *
- * @NL80211_CMD_SET_CQM: Connection quality monitor configuration. This command
- * is used to configure connection quality monitoring notification trigger
- * levels.
- * @NL80211_CMD_NOTIFY_CQM: Connection quality monitor notification. This
- * command is used as an event to indicate the that a trigger level was
- * reached.
- * @NL80211_CMD_SET_CHANNEL: Set the channel (using %NL80211_ATTR_WIPHY_FREQ
- * and the attributes determining channel width) the given interface
- * (identifed by %NL80211_ATTR_IFINDEX) shall operate on.
- * In case multiple channels are supported by the device, the mechanism
- * with which it switches channels is implementation-defined.
- * When a monitor interface is given, it can only switch channel while
- * no other interfaces are operating to avoid disturbing the operation
- * of any other interfaces, and other interfaces will again take
- * precedence when they are used.
- *
- * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface
- * (no longer supported).
- *
- * @NL80211_CMD_SET_MULTICAST_TO_UNICAST: Configure if this AP should perform
- * multicast to unicast conversion. When enabled, all multicast packets
- * with ethertype ARP, IPv4 or IPv6 (possibly within an 802.1Q header)
- * will be sent out to each station once with the destination (multicast)
- * MAC address replaced by the station's MAC address. Note that this may
- * break certain expectations of the receiver, e.g. the ability to drop
- * unicast IP packets encapsulated in multicast L2 frames, or the ability
- * to not send destination unreachable messages in such cases.
- * This can only be toggled per BSS. Configure this on an interface of
- * type %NL80211_IFTYPE_AP. It applies to all its VLAN interfaces
- * (%NL80211_IFTYPE_AP_VLAN), except for those in 4addr (WDS) mode.
- * If %NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED is not present with this
- * command, the feature is disabled.
- *
- * @NL80211_CMD_JOIN_MESH: Join a mesh. The mesh ID must be given, and initial
- * mesh config parameters may be given.
- * @NL80211_CMD_LEAVE_MESH: Leave the mesh network -- no special arguments, the
- * network is determined by the network interface.
- *
- * @NL80211_CMD_UNPROT_DEAUTHENTICATE: Unprotected deauthentication frame
- * notification. This event is used to indicate that an unprotected
- * deauthentication frame was dropped when MFP is in use.
- * @NL80211_CMD_UNPROT_DISASSOCIATE: Unprotected disassociation frame
- * notification. This event is used to indicate that an unprotected
- * disassociation frame was dropped when MFP is in use.
- *
- * @NL80211_CMD_NEW_PEER_CANDIDATE: Notification on the reception of a
- * beacon or probe response from a compatible mesh peer. This is only
- * sent while no station information (sta_info) exists for the new peer
- * candidate and when @NL80211_MESH_SETUP_USERSPACE_AUTH,
- * @NL80211_MESH_SETUP_USERSPACE_AMPE, or
- * @NL80211_MESH_SETUP_USERSPACE_MPM is set. On reception of this
- * notification, userspace may decide to create a new station
- * (@NL80211_CMD_NEW_STATION). To stop this notification from
- * reoccurring, the userspace authentication daemon may want to create the
- * new station with the AUTHENTICATED flag unset and maybe change it later
- * depending on the authentication result.
- *
- * @NL80211_CMD_GET_WOWLAN: get Wake-on-Wireless-LAN (WoWLAN) settings.
- * @NL80211_CMD_SET_WOWLAN: set Wake-on-Wireless-LAN (WoWLAN) settings.
- * Since wireless is more complex than wired ethernet, it supports
- * various triggers. These triggers can be configured through this
- * command with the %NL80211_ATTR_WOWLAN_TRIGGERS attribute. For
- * more background information, see
- * https://wireless.wiki.kernel.org/en/users/Documentation/WoWLAN.
- * The @NL80211_CMD_SET_WOWLAN command can also be used as a notification
- * from the driver reporting the wakeup reason. In this case, the
- * @NL80211_ATTR_WOWLAN_TRIGGERS attribute will contain the reason
- * for the wakeup, if it was caused by wireless. If it is not present
- * in the wakeup notification, the wireless device didn't cause the
- * wakeup but reports that it was woken up.
- *
- * @NL80211_CMD_SET_REKEY_OFFLOAD: This command is used give the driver
- * the necessary information for supporting GTK rekey offload. This
- * feature is typically used during WoWLAN. The configuration data
- * is contained in %NL80211_ATTR_REKEY_DATA (which is nested and
- * contains the data in sub-attributes). After rekeying happened,
- * this command may also be sent by the driver as an MLME event to
- * inform userspace of the new replay counter.
- *
- * @NL80211_CMD_PMKSA_CANDIDATE: This is used as an event to inform userspace
- * of PMKSA caching dandidates.
- *
- * @NL80211_CMD_TDLS_OPER: Perform a high-level TDLS command (e.g. link setup).
- * In addition, this can be used as an event to request userspace to take
- * actions on TDLS links (set up a new link or tear down an existing one).
- * In such events, %NL80211_ATTR_TDLS_OPERATION indicates the requested
- * operation, %NL80211_ATTR_MAC contains the peer MAC address, and
- * %NL80211_ATTR_REASON_CODE the reason code to be used (only with
- * %NL80211_TDLS_TEARDOWN).
- * @NL80211_CMD_TDLS_MGMT: Send a TDLS management frame. The
- * %NL80211_ATTR_TDLS_ACTION attribute determines the type of frame to be
- * sent. Public Action codes (802.11-2012 8.1.5.1) will be sent as
- * 802.11 management frames, while TDLS action codes (802.11-2012
- * 8.5.13.1) will be encapsulated and sent as data frames. The currently
- * supported Public Action code is %WLAN_PUB_ACTION_TDLS_DISCOVER_RES
- * and the currently supported TDLS actions codes are given in
- * &enum ieee80211_tdls_actioncode.
- *
- * @NL80211_CMD_UNEXPECTED_FRAME: Used by an application controlling an AP
- * (or GO) interface (i.e. hostapd) to ask for unexpected frames to
- * implement sending deauth to stations that send unexpected class 3
- * frames. Also used as the event sent by the kernel when such a frame
- * is received.
- * For the event, the %NL80211_ATTR_MAC attribute carries the TA and
- * other attributes like the interface index are present.
- * If used as the command it must have an interface index and you can
- * only unsubscribe from the event by closing the socket. Subscription
- * is also for %NL80211_CMD_UNEXPECTED_4ADDR_FRAME events.
- *
- * @NL80211_CMD_UNEXPECTED_4ADDR_FRAME: Sent as an event indicating that the
- * associated station identified by %NL80211_ATTR_MAC sent a 4addr frame
- * and wasn't already in a 4-addr VLAN. The event will be sent similarly
- * to the %NL80211_CMD_UNEXPECTED_FRAME event, to the same listener.
- *
- * @NL80211_CMD_PROBE_CLIENT: Probe an associated station on an AP interface
- * by sending a null data frame to it and reporting when the frame is
- * acknowleged. This is used to allow timing out inactive clients. Uses
- * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_MAC. The command returns a
- * direct reply with an %NL80211_ATTR_COOKIE that is later used to match
- * up the event with the request. The event includes the same data and
- * has %NL80211_ATTR_ACK set if the frame was ACKed.
- *
- * @NL80211_CMD_REGISTER_BEACONS: Register this socket to receive beacons from
- * other BSSes when any interfaces are in AP mode. This helps implement
- * OLBC handling in hostapd. Beacons are reported in %NL80211_CMD_FRAME
- * messages. Note that per PHY only one application may register.
- *
- * @NL80211_CMD_SET_NOACK_MAP: sets a bitmap for the individual TIDs whether
- * No Acknowledgement Policy should be applied.
- *
- * @NL80211_CMD_CH_SWITCH_NOTIFY: An AP or GO may decide to switch channels
- * independently of the userspace SME, send this event indicating
- * %NL80211_ATTR_IFINDEX is now on %NL80211_ATTR_WIPHY_FREQ and the
- * attributes determining channel width. This indication may also be
- * sent when a remotely-initiated switch (e.g., when a STA receives a CSA
- * from the remote AP) is completed;
- *
- * @NL80211_CMD_CH_SWITCH_STARTED_NOTIFY: Notify that a channel switch
- * has been started on an interface, regardless of the initiator
- * (ie. whether it was requested from a remote device or
- * initiated on our own). It indicates that
- * %NL80211_ATTR_IFINDEX will be on %NL80211_ATTR_WIPHY_FREQ
- * after %NL80211_ATTR_CH_SWITCH_COUNT TBTT's. The userspace may
- * decide to react to this indication by requesting other
- * interfaces to change channel as well.
- *
- * @NL80211_CMD_START_P2P_DEVICE: Start the given P2P Device, identified by
- * its %NL80211_ATTR_WDEV identifier. It must have been created with
- * %NL80211_CMD_NEW_INTERFACE previously. After it has been started, the
- * P2P Device can be used for P2P operations, e.g. remain-on-channel and
- * public action frame TX.
- * @NL80211_CMD_STOP_P2P_DEVICE: Stop the given P2P Device, identified by
- * its %NL80211_ATTR_WDEV identifier.
- *
- * @NL80211_CMD_CONN_FAILED: connection request to an AP failed; used to
- * notify userspace that AP has rejected the connection request from a
- * station, due to particular reason. %NL80211_ATTR_CONN_FAILED_REASON
- * is used for this.
- *
- * @NL80211_CMD_SET_MCAST_RATE: Change the rate used to send multicast frames
- * for IBSS or MESH vif.
- *
- * @NL80211_CMD_SET_MAC_ACL: sets ACL for MAC address based access control.
- * This is to be used with the drivers advertising the support of MAC
- * address based access control. List of MAC addresses is passed in
- * %NL80211_ATTR_MAC_ADDRS and ACL policy is passed in
- * %NL80211_ATTR_ACL_POLICY. Driver will enable ACL with this list, if it
- * is not already done. The new list will replace any existing list. Driver
- * will clear its ACL when the list of MAC addresses passed is empty. This
- * command is used in AP/P2P GO mode. Driver has to make sure to clear its
- * ACL list during %NL80211_CMD_STOP_AP.
- *
- * @NL80211_CMD_RADAR_DETECT: Start a Channel availability check (CAC). Once
- * a radar is detected or the channel availability scan (CAC) has finished
- * or was aborted, or a radar was detected, usermode will be notified with
- * this event. This command is also used to notify userspace about radars
- * while operating on this channel.
- * %NL80211_ATTR_RADAR_EVENT is used to inform about the type of the
- * event.
- *
- * @NL80211_CMD_GET_PROTOCOL_FEATURES: Get global nl80211 protocol features,
- * i.e. features for the nl80211 protocol rather than device features.
- * Returns the features in the %NL80211_ATTR_PROTOCOL_FEATURES bitmap.
- *
- * @NL80211_CMD_UPDATE_FT_IES: Pass down the most up-to-date Fast Transition
- * Information Element to the WLAN driver
- *
- * @NL80211_CMD_FT_EVENT: Send a Fast transition event from the WLAN driver
- * to the supplicant. This will carry the target AP's MAC address along
- * with the relevant Information Elements. This event is used to report
- * received FT IEs (MDIE, FTIE, RSN IE, TIE, RICIE).
- *
- * @NL80211_CMD_CRIT_PROTOCOL_START: Indicates user-space will start running
- * a critical protocol that needs more reliability in the connection to
- * complete.
- *
- * @NL80211_CMD_CRIT_PROTOCOL_STOP: Indicates the connection reliability can
- * return back to normal.
- *
- * @NL80211_CMD_GET_COALESCE: Get currently supported coalesce rules.
- * @NL80211_CMD_SET_COALESCE: Configure coalesce rules or clear existing rules.
- *
- * @NL80211_CMD_CHANNEL_SWITCH: Perform a channel switch by announcing the
- * new channel information (Channel Switch Announcement - CSA)
- * in the beacon for some time (as defined in the
- * %NL80211_ATTR_CH_SWITCH_COUNT parameter) and then change to the
- * new channel. Userspace provides the new channel information (using
- * %NL80211_ATTR_WIPHY_FREQ and the attributes determining channel
- * width). %NL80211_ATTR_CH_SWITCH_BLOCK_TX may be supplied to inform
- * other station that transmission must be blocked until the channel
- * switch is complete.
- *
- * @NL80211_CMD_VENDOR: Vendor-specified command/event. The command is specified
- * by the %NL80211_ATTR_VENDOR_ID attribute and a sub-command in
- * %NL80211_ATTR_VENDOR_SUBCMD. Parameter(s) can be transported in
- * %NL80211_ATTR_VENDOR_DATA.
- * For feature advertisement, the %NL80211_ATTR_VENDOR_DATA attribute is
- * used in the wiphy data as a nested attribute containing descriptions
- * (&struct nl80211_vendor_cmd_info) of the supported vendor commands.
- * This may also be sent as an event with the same attributes.
- *
- * @NL80211_CMD_SET_QOS_MAP: Set Interworking QoS mapping for IP DSCP values.
- * The QoS mapping information is included in %NL80211_ATTR_QOS_MAP. If
- * that attribute is not included, QoS mapping is disabled. Since this
- * QoS mapping is relevant for IP packets, it is only valid during an
- * association. This is cleared on disassociation and AP restart.
- *
- * @NL80211_CMD_ADD_TX_TS: Ask the kernel to add a traffic stream for the given
- * %NL80211_ATTR_TSID and %NL80211_ATTR_MAC with %NL80211_ATTR_USER_PRIO
- * and %NL80211_ATTR_ADMITTED_TIME parameters.
- * Note that the action frame handshake with the AP shall be handled by
- * userspace via the normal management RX/TX framework, this only sets
- * up the TX TS in the driver/device.
- * If the admitted time attribute is not added then the request just checks
- * if a subsequent setup could be successful, the intent is to use this to
- * avoid setting up a session with the AP when local restrictions would
- * make that impossible. However, the subsequent "real" setup may still
- * fail even if the check was successful.
- * @NL80211_CMD_DEL_TX_TS: Remove an existing TS with the %NL80211_ATTR_TSID
- * and %NL80211_ATTR_MAC parameters. It isn't necessary to call this
- * before removing a station entry entirely, or before disassociating
- * or similar, cleanup will happen in the driver/device in this case.
- *
- * @NL80211_CMD_GET_MPP: Get mesh path attributes for mesh proxy path to
- * destination %NL80211_ATTR_MAC on the interface identified by
- * %NL80211_ATTR_IFINDEX.
- *
- * @NL80211_CMD_JOIN_OCB: Join the OCB network. The center frequency and
- * bandwidth of a channel must be given.
- * @NL80211_CMD_LEAVE_OCB: Leave the OCB network -- no special arguments, the
- * network is determined by the network interface.
- *
- * @NL80211_CMD_TDLS_CHANNEL_SWITCH: Start channel-switching with a TDLS peer,
- * identified by the %NL80211_ATTR_MAC parameter. A target channel is
- * provided via %NL80211_ATTR_WIPHY_FREQ and other attributes determining
- * channel width/type. The target operating class is given via
- * %NL80211_ATTR_OPER_CLASS.
- * The driver is responsible for continually initiating channel-switching
- * operations and returning to the base channel for communication with the
- * AP.
- * @NL80211_CMD_TDLS_CANCEL_CHANNEL_SWITCH: Stop channel-switching with a TDLS
- * peer given by %NL80211_ATTR_MAC. Both peers must be on the base channel
- * when this command completes.
- *
- * @NL80211_CMD_WIPHY_REG_CHANGE: Similar to %NL80211_CMD_REG_CHANGE, but used
- * as an event to indicate changes for devices with wiphy-specific regdom
- * management.
- *
- * @NL80211_CMD_ABORT_SCAN: Stop an ongoing scan. Returns -ENOENT if a scan is
- * not running. The driver indicates the status of the scan through
- * cfg80211_scan_done().
- *
- * @NL80211_CMD_START_NAN: Start NAN operation, identified by its
- * %NL80211_ATTR_WDEV interface. This interface must have been
- * previously created with %NL80211_CMD_NEW_INTERFACE. After it
- * has been started, the NAN interface will create or join a
- * cluster. This command must have a valid
- * %NL80211_ATTR_NAN_MASTER_PREF attribute and optional
- * %NL80211_ATTR_BANDS attributes. If %NL80211_ATTR_BANDS is
- * omitted or set to 0, it means don't-care and the device will
- * decide what to use. After this command NAN functions can be
- * added.
- * @NL80211_CMD_STOP_NAN: Stop the NAN operation, identified by
- * its %NL80211_ATTR_WDEV interface.
- * @NL80211_CMD_ADD_NAN_FUNCTION: Add a NAN function. The function is defined
- * with %NL80211_ATTR_NAN_FUNC nested attribute. When called, this
- * operation returns the strictly positive and unique instance id
- * (%NL80211_ATTR_NAN_FUNC_INST_ID) and a cookie (%NL80211_ATTR_COOKIE)
- * of the function upon success.
- * Since instance ID's can be re-used, this cookie is the right
- * way to identify the function. This will avoid races when a termination
- * event is handled by the user space after it has already added a new
- * function that got the same instance id from the kernel as the one
- * which just terminated.
- * This cookie may be used in NAN events even before the command
- * returns, so userspace shouldn't process NAN events until it processes
- * the response to this command.
- * Look at %NL80211_ATTR_SOCKET_OWNER as well.
- * @NL80211_CMD_DEL_NAN_FUNCTION: Delete a NAN function by cookie.
- * This command is also used as a notification sent when a NAN function is
- * terminated. This will contain a %NL80211_ATTR_NAN_FUNC_INST_ID
- * and %NL80211_ATTR_COOKIE attributes.
- * @NL80211_CMD_CHANGE_NAN_CONFIG: Change current NAN
- * configuration. NAN must be operational (%NL80211_CMD_START_NAN
- * was executed). It must contain at least one of the following
- * attributes: %NL80211_ATTR_NAN_MASTER_PREF,
- * %NL80211_ATTR_BANDS. If %NL80211_ATTR_BANDS is omitted, the
- * current configuration is not changed. If it is present but
- * set to zero, the configuration is changed to don't-care
- * (i.e. the device can decide what to do).
- * @NL80211_CMD_NAN_FUNC_MATCH: Notification sent when a match is reported.
- * This will contain a %NL80211_ATTR_NAN_MATCH nested attribute and
- * %NL80211_ATTR_COOKIE.
- *
- * @NL80211_CMD_UPDATE_CONNECT_PARAMS: Update one or more connect parameters
- * for subsequent roaming cases if the driver or firmware uses internal
- * BSS selection. This command can be issued only while connected and it
- * does not result in a change for the current association. Currently,
- * only the %NL80211_ATTR_IE data is used and updated with this command.
- *
- * @NL80211_CMD_SET_PMK: For offloaded 4-Way handshake, set the PMK or PMK-R0
- * for the given authenticator address (specified with %NL80211_ATTR_MAC).
- * When %NL80211_ATTR_PMKR0_NAME is set, %NL80211_ATTR_PMK specifies the
- * PMK-R0, otherwise it specifies the PMK.
- * @NL80211_CMD_DEL_PMK: For offloaded 4-Way handshake, delete the previously
- * configured PMK for the authenticator address identified by
- * %NL80211_ATTR_MAC.
- * @NL80211_CMD_PORT_AUTHORIZED: An event that indicates an 802.1X FT roam was
- * completed successfully. Drivers that support 4 way handshake offload
- * should send this event after indicating 802.1X FT assocation with
- * %NL80211_CMD_ROAM. If the 4 way handshake failed %NL80211_CMD_DISCONNECT
- * should be indicated instead.
- * @NL80211_CMD_CONTROL_PORT_FRAME: Control Port (e.g. PAE) frame TX request
- * and RX notification. This command is used both as a request to transmit
- * a control port frame and as a notification that a control port frame
- * has been received. %NL80211_ATTR_FRAME is used to specify the
- * frame contents. The frame is the raw EAPoL data, without ethernet or
- * 802.11 headers.
- * When used as an event indication %NL80211_ATTR_CONTROL_PORT_ETHERTYPE,
- * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT and %NL80211_ATTR_MAC are added
- * indicating the protocol type of the received frame; whether the frame
- * was received unencrypted and the MAC address of the peer respectively.
- *
- * @NL80211_CMD_RELOAD_REGDB: Request that the regdb firmware file is reloaded.
- *
- * @NL80211_CMD_EXTERNAL_AUTH: This interface is exclusively defined for host
- * drivers that do not define separate commands for authentication and
- * association, but rely on user space for the authentication to happen.
- * This interface acts both as the event request (driver to user space)
- * to trigger the authentication and command response (userspace to
- * driver) to indicate the authentication status.
- *
- * User space uses the %NL80211_CMD_CONNECT command to the host driver to
- * trigger a connection. The host driver selects a BSS and further uses
- * this interface to offload only the authentication part to the user
- * space. Authentication frames are passed between the driver and user
- * space through the %NL80211_CMD_FRAME interface. Host driver proceeds
- * further with the association after getting successful authentication
- * status. User space indicates the authentication status through
- * %NL80211_ATTR_STATUS_CODE attribute in %NL80211_CMD_EXTERNAL_AUTH
- * command interface.
- *
- * Host driver reports this status on an authentication failure to the
- * user space through the connect result as the user space would have
- * initiated the connection through the connect request.
- *
- * @NL80211_CMD_STA_OPMODE_CHANGED: An event that notify station's
- * ht opmode or vht opmode changes using any of %NL80211_ATTR_SMPS_MODE,
- * %NL80211_ATTR_CHANNEL_WIDTH,%NL80211_ATTR_NSS attributes with its
- * address(specified in %NL80211_ATTR_MAC).
- *
- * @NL80211_CMD_GET_FTM_RESPONDER_STATS: Retrieve FTM responder statistics, in
- * the %NL80211_ATTR_FTM_RESPONDER_STATS attribute.
- *
- * @NL80211_CMD_PEER_MEASUREMENT_START: start a (set of) peer measurement(s)
- * with the given parameters, which are encapsulated in the nested
- * %NL80211_ATTR_PEER_MEASUREMENTS attribute. Optionally, MAC address
- * randomization may be enabled and configured by specifying the
- * %NL80211_ATTR_MAC and %NL80211_ATTR_MAC_MASK attributes.
- * If a timeout is requested, use the %NL80211_ATTR_TIMEOUT attribute.
- * A u64 cookie for further %NL80211_ATTR_COOKIE use is returned in
- * the netlink extended ack message.
- *
- * To cancel a measurement, close the socket that requested it.
- *
- * Measurement results are reported to the socket that requested the
- * measurement using @NL80211_CMD_PEER_MEASUREMENT_RESULT when they
- * become available, so applications must ensure a large enough socket
- * buffer size.
- *
- * Depending on driver support it may or may not be possible to start
- * multiple concurrent measurements.
- * @NL80211_CMD_PEER_MEASUREMENT_RESULT: This command number is used for the
- * result notification from the driver to the requesting socket.
- * @NL80211_CMD_PEER_MEASUREMENT_COMPLETE: Notification only, indicating that
- * the measurement completed, using the measurement cookie
- * (%NL80211_ATTR_COOKIE).
- *
- * @NL80211_CMD_NOTIFY_RADAR: Notify the kernel that a radar signal was
- * detected and reported by a neighboring device on the channel
- * indicated by %NL80211_ATTR_WIPHY_FREQ and other attributes
- * determining the width and type.
- *
- * @NL80211_CMD_UPDATE_OWE_INFO: This interface allows the host driver to
- * offload OWE processing to user space. This intends to support
- * OWE AKM by the host drivers that implement SME but rely
- * on the user space for the cryptographic/DH IE processing in AP mode.
- *
- * @NL80211_CMD_PROBE_MESH_LINK: The requirement for mesh link metric
- * refreshing, is that from one mesh point we be able to send some data
- * frames to other mesh points which are not currently selected as a
- * primary traffic path, but which are only 1 hop away. The absence of
- * the primary path to the chosen node makes it necessary to apply some
- * form of marking on a chosen packet stream so that the packets can be
- * properly steered to the selected node for testing, and not by the
- * regular mesh path lookup. Further, the packets must be of type data
- * so that the rate control (often embedded in firmware) is used for
- * rate selection.
- *
- * Here attribute %NL80211_ATTR_MAC is used to specify connected mesh
- * peer MAC address and %NL80211_ATTR_FRAME is used to specify the frame
- * content. The frame is ethernet data.
- *
- * @NL80211_CMD_SET_TID_CONFIG: Data frame TID specific configuration
- * is passed using %NL80211_ATTR_TID_CONFIG attribute.
- *
- * @NL80211_CMD_UNPROT_BEACON: Unprotected or incorrectly protected Beacon
- * frame. This event is used to indicate that a received Beacon frame was
- * dropped because it did not include a valid MME MIC while beacon
- * protection was enabled (BIGTK configured in station mode).
- *
- * @NL80211_CMD_CONTROL_PORT_FRAME_TX_STATUS: Report TX status of a control
- * port frame transmitted with %NL80211_CMD_CONTROL_PORT_FRAME.
- * %NL80211_ATTR_COOKIE identifies the TX command and %NL80211_ATTR_FRAME
- * includes the contents of the frame. %NL80211_ATTR_ACK flag is included
- * if the recipient acknowledged the frame.
- *
- * @NL80211_CMD_SET_SAR_SPECS: SAR power limitation configuration is
- * passed using %NL80211_ATTR_SAR_SPEC. %NL80211_ATTR_WIPHY is used to
- * specify the wiphy index to be applied to.
- *
- * @NL80211_CMD_OBSS_COLOR_COLLISION: This notification is sent out whenever
- * mac80211/drv detects a bss color collision.
- *
- * @NL80211_CMD_COLOR_CHANGE_REQUEST: This command is used to indicate that
- * userspace wants to change the BSS color.
- *
- * @NL80211_CMD_COLOR_CHANGE_STARTED: Notify userland, that a color change has
- * started
- *
- * @NL80211_CMD_COLOR_CHANGE_ABORTED: Notify userland, that the color change has
- * been aborted
- *
- * @NL80211_CMD_COLOR_CHANGE_COMPLETED: Notify userland that the color change
- * has completed
- *
- * @NL80211_CMD_MAX: highest used command number
- * @__NL80211_CMD_AFTER_LAST: internal use
- */
- enum nl80211_commands {
- /* don't change the order or add anything between, this is ABI! */
- NL80211_CMD_UNSPEC,
- NL80211_CMD_GET_WIPHY, /* can dump */
- NL80211_CMD_SET_WIPHY,
- NL80211_CMD_NEW_WIPHY,
- NL80211_CMD_DEL_WIPHY,
- NL80211_CMD_GET_INTERFACE, /* can dump */
- NL80211_CMD_SET_INTERFACE,
- NL80211_CMD_NEW_INTERFACE,
- NL80211_CMD_DEL_INTERFACE,
- NL80211_CMD_GET_KEY,
- NL80211_CMD_SET_KEY,
- NL80211_CMD_NEW_KEY,
- NL80211_CMD_DEL_KEY,
- NL80211_CMD_GET_BEACON,
- NL80211_CMD_SET_BEACON,
- NL80211_CMD_START_AP,
- NL80211_CMD_NEW_BEACON = NL80211_CMD_START_AP,
- NL80211_CMD_STOP_AP,
- NL80211_CMD_DEL_BEACON = NL80211_CMD_STOP_AP,
- NL80211_CMD_GET_STATION,
- NL80211_CMD_SET_STATION,
- NL80211_CMD_NEW_STATION,
- NL80211_CMD_DEL_STATION,
- NL80211_CMD_GET_MPATH,
- NL80211_CMD_SET_MPATH,
- NL80211_CMD_NEW_MPATH,
- NL80211_CMD_DEL_MPATH,
- NL80211_CMD_SET_BSS,
- NL80211_CMD_SET_REG,
- NL80211_CMD_REQ_SET_REG,
- NL80211_CMD_GET_MESH_CONFIG,
- NL80211_CMD_SET_MESH_CONFIG,
- NL80211_CMD_SET_MGMT_EXTRA_IE /* reserved; not used */,
- NL80211_CMD_GET_REG,
- NL80211_CMD_GET_SCAN,
- NL80211_CMD_TRIGGER_SCAN,
- NL80211_CMD_NEW_SCAN_RESULTS,
- NL80211_CMD_SCAN_ABORTED,
- NL80211_CMD_REG_CHANGE,
- NL80211_CMD_AUTHENTICATE,
- NL80211_CMD_ASSOCIATE,
- NL80211_CMD_DEAUTHENTICATE,
- NL80211_CMD_DISASSOCIATE,
- NL80211_CMD_MICHAEL_MIC_FAILURE,
- NL80211_CMD_REG_BEACON_HINT,
- NL80211_CMD_JOIN_IBSS,
- NL80211_CMD_LEAVE_IBSS,
- NL80211_CMD_TESTMODE,
- NL80211_CMD_CONNECT,
- NL80211_CMD_ROAM,
- NL80211_CMD_DISCONNECT,
- NL80211_CMD_SET_WIPHY_NETNS,
- NL80211_CMD_GET_SURVEY,
- NL80211_CMD_NEW_SURVEY_RESULTS,
- NL80211_CMD_SET_PMKSA,
- NL80211_CMD_DEL_PMKSA,
- NL80211_CMD_FLUSH_PMKSA,
- NL80211_CMD_REMAIN_ON_CHANNEL,
- NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL,
- NL80211_CMD_SET_TX_BITRATE_MASK,
- NL80211_CMD_REGISTER_FRAME,
- NL80211_CMD_REGISTER_ACTION = NL80211_CMD_REGISTER_FRAME,
- NL80211_CMD_FRAME,
- NL80211_CMD_ACTION = NL80211_CMD_FRAME,
- NL80211_CMD_FRAME_TX_STATUS,
- NL80211_CMD_ACTION_TX_STATUS = NL80211_CMD_FRAME_TX_STATUS,
- NL80211_CMD_SET_POWER_SAVE,
- NL80211_CMD_GET_POWER_SAVE,
- NL80211_CMD_SET_CQM,
- NL80211_CMD_NOTIFY_CQM,
- NL80211_CMD_SET_CHANNEL,
- NL80211_CMD_SET_WDS_PEER,
- NL80211_CMD_FRAME_WAIT_CANCEL,
- NL80211_CMD_JOIN_MESH,
- NL80211_CMD_LEAVE_MESH,
- NL80211_CMD_UNPROT_DEAUTHENTICATE,
- NL80211_CMD_UNPROT_DISASSOCIATE,
- NL80211_CMD_NEW_PEER_CANDIDATE,
- NL80211_CMD_GET_WOWLAN,
- NL80211_CMD_SET_WOWLAN,
- NL80211_CMD_START_SCHED_SCAN,
- NL80211_CMD_STOP_SCHED_SCAN,
- NL80211_CMD_SCHED_SCAN_RESULTS,
- NL80211_CMD_SCHED_SCAN_STOPPED,
- NL80211_CMD_SET_REKEY_OFFLOAD,
- NL80211_CMD_PMKSA_CANDIDATE,
- NL80211_CMD_TDLS_OPER,
- NL80211_CMD_TDLS_MGMT,
- NL80211_CMD_UNEXPECTED_FRAME,
- NL80211_CMD_PROBE_CLIENT,
- NL80211_CMD_REGISTER_BEACONS,
- NL80211_CMD_UNEXPECTED_4ADDR_FRAME,
- NL80211_CMD_SET_NOACK_MAP,
- NL80211_CMD_CH_SWITCH_NOTIFY,
- NL80211_CMD_START_P2P_DEVICE,
- NL80211_CMD_STOP_P2P_DEVICE,
- NL80211_CMD_CONN_FAILED,
- NL80211_CMD_SET_MCAST_RATE,
- NL80211_CMD_SET_MAC_ACL,
- NL80211_CMD_RADAR_DETECT,
- NL80211_CMD_GET_PROTOCOL_FEATURES,
- NL80211_CMD_UPDATE_FT_IES,
- NL80211_CMD_FT_EVENT,
- NL80211_CMD_CRIT_PROTOCOL_START,
- NL80211_CMD_CRIT_PROTOCOL_STOP,
- NL80211_CMD_GET_COALESCE,
- NL80211_CMD_SET_COALESCE,
- NL80211_CMD_CHANNEL_SWITCH,
- NL80211_CMD_VENDOR,
- NL80211_CMD_SET_QOS_MAP,
- NL80211_CMD_ADD_TX_TS,
- NL80211_CMD_DEL_TX_TS,
- NL80211_CMD_GET_MPP,
- NL80211_CMD_JOIN_OCB,
- NL80211_CMD_LEAVE_OCB,
- NL80211_CMD_CH_SWITCH_STARTED_NOTIFY,
- NL80211_CMD_TDLS_CHANNEL_SWITCH,
- NL80211_CMD_TDLS_CANCEL_CHANNEL_SWITCH,
- NL80211_CMD_WIPHY_REG_CHANGE,
- NL80211_CMD_ABORT_SCAN,
- NL80211_CMD_START_NAN,
- NL80211_CMD_STOP_NAN,
- NL80211_CMD_ADD_NAN_FUNCTION,
- NL80211_CMD_DEL_NAN_FUNCTION,
- NL80211_CMD_CHANGE_NAN_CONFIG,
- NL80211_CMD_NAN_MATCH,
- NL80211_CMD_SET_MULTICAST_TO_UNICAST,
- NL80211_CMD_UPDATE_CONNECT_PARAMS,
- NL80211_CMD_SET_PMK,
- NL80211_CMD_DEL_PMK,
- NL80211_CMD_PORT_AUTHORIZED,
- NL80211_CMD_RELOAD_REGDB,
- NL80211_CMD_EXTERNAL_AUTH,
- NL80211_CMD_STA_OPMODE_CHANGED,
- NL80211_CMD_CONTROL_PORT_FRAME,
- NL80211_CMD_GET_FTM_RESPONDER_STATS,
- NL80211_CMD_PEER_MEASUREMENT_START,
- NL80211_CMD_PEER_MEASUREMENT_RESULT,
- NL80211_CMD_PEER_MEASUREMENT_COMPLETE,
- NL80211_CMD_NOTIFY_RADAR,
- NL80211_CMD_UPDATE_OWE_INFO,
- NL80211_CMD_PROBE_MESH_LINK,
- NL80211_CMD_SET_TID_CONFIG,
- NL80211_CMD_UNPROT_BEACON,
- NL80211_CMD_CONTROL_PORT_FRAME_TX_STATUS,
- NL80211_CMD_SET_SAR_SPECS,
- NL80211_CMD_OBSS_COLOR_COLLISION,
- NL80211_CMD_COLOR_CHANGE_REQUEST,
- NL80211_CMD_COLOR_CHANGE_STARTED,
- NL80211_CMD_COLOR_CHANGE_ABORTED,
- NL80211_CMD_COLOR_CHANGE_COMPLETED,
- /* add new commands above here */
- /* used to define NL80211_CMD_MAX below */
- __NL80211_CMD_AFTER_LAST,
- NL80211_CMD_MAX = __NL80211_CMD_AFTER_LAST - 1
- };
- /*
- * Allow user space programs to use #ifdef on new commands by defining them
- * here
- */
- #define NL80211_CMD_SET_BSS NL80211_CMD_SET_BSS
- #define NL80211_CMD_SET_MGMT_EXTRA_IE NL80211_CMD_SET_MGMT_EXTRA_IE
- #define NL80211_CMD_REG_CHANGE NL80211_CMD_REG_CHANGE
- #define NL80211_CMD_AUTHENTICATE NL80211_CMD_AUTHENTICATE
- #define NL80211_CMD_ASSOCIATE NL80211_CMD_ASSOCIATE
- #define NL80211_CMD_DEAUTHENTICATE NL80211_CMD_DEAUTHENTICATE
- #define NL80211_CMD_DISASSOCIATE NL80211_CMD_DISASSOCIATE
- #define NL80211_CMD_REG_BEACON_HINT NL80211_CMD_REG_BEACON_HINT
- #define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS
- /* source-level API compatibility */
- #define NL80211_CMD_GET_MESH_PARAMS NL80211_CMD_GET_MESH_CONFIG
- #define NL80211_CMD_SET_MESH_PARAMS NL80211_CMD_SET_MESH_CONFIG
- #define NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE NL80211_MESH_SETUP_IE
- /**
- * enum nl80211_attrs - nl80211 netlink attributes
- *
- * @NL80211_ATTR_UNSPEC: unspecified attribute to catch errors
- *
- * @NL80211_ATTR_WIPHY: index of wiphy to operate on, cf.
- * /sys/class/ieee80211/<phyname>/index
- * @NL80211_ATTR_WIPHY_NAME: wiphy name (used for renaming)
- * @NL80211_ATTR_WIPHY_TXQ_PARAMS: a nested array of TX queue parameters
- * @NL80211_ATTR_WIPHY_FREQ: frequency of the selected channel in MHz,
- * defines the channel together with the (deprecated)
- * %NL80211_ATTR_WIPHY_CHANNEL_TYPE attribute or the attributes
- * %NL80211_ATTR_CHANNEL_WIDTH and if needed %NL80211_ATTR_CENTER_FREQ1
- * and %NL80211_ATTR_CENTER_FREQ2
- * @NL80211_ATTR_CHANNEL_WIDTH: u32 attribute containing one of the values
- * of &enum nl80211_chan_width, describing the channel width. See the
- * documentation of the enum for more information.
- * @NL80211_ATTR_CENTER_FREQ1: Center frequency of the first part of the
- * channel, used for anything but 20 MHz bandwidth. In S1G this is the
- * operating channel center frequency.
- * @NL80211_ATTR_CENTER_FREQ2: Center frequency of the second part of the
- * channel, used only for 80+80 MHz bandwidth
- * @NL80211_ATTR_WIPHY_CHANNEL_TYPE: included with NL80211_ATTR_WIPHY_FREQ
- * if HT20 or HT40 are to be used (i.e., HT disabled if not included):
- * NL80211_CHAN_NO_HT = HT not allowed (i.e., same as not including
- * this attribute)
- * NL80211_CHAN_HT20 = HT20 only
- * NL80211_CHAN_HT40MINUS = secondary channel is below the primary channel
- * NL80211_CHAN_HT40PLUS = secondary channel is above the primary channel
- * This attribute is now deprecated.
- * @NL80211_ATTR_WIPHY_RETRY_SHORT: TX retry limit for frames whose length is
- * less than or equal to the RTS threshold; allowed range: 1..255;
- * dot11ShortRetryLimit; u8
- * @NL80211_ATTR_WIPHY_RETRY_LONG: TX retry limit for frames whose length is
- * greater than the RTS threshold; allowed range: 1..255;
- * dot11ShortLongLimit; u8
- * @NL80211_ATTR_WIPHY_FRAG_THRESHOLD: fragmentation threshold, i.e., maximum
- * length in octets for frames; allowed range: 256..8000, disable
- * fragmentation with (u32)-1; dot11FragmentationThreshold; u32
- * @NL80211_ATTR_WIPHY_RTS_THRESHOLD: RTS threshold (TX frames with length
- * larger than or equal to this use RTS/CTS handshake); allowed range:
- * 0..65536, disable with (u32)-1; dot11RTSThreshold; u32
- * @NL80211_ATTR_WIPHY_COVERAGE_CLASS: Coverage Class as defined by IEEE 802.11
- * section 7.3.2.9; dot11CoverageClass; u8
- *
- * @NL80211_ATTR_IFINDEX: network interface index of the device to operate on
- * @NL80211_ATTR_IFNAME: network interface name
- * @NL80211_ATTR_IFTYPE: type of virtual interface, see &enum nl80211_iftype
- *
- * @NL80211_ATTR_WDEV: wireless device identifier, used for pseudo-devices
- * that don't have a netdev (u64)
- *
- * @NL80211_ATTR_MAC: MAC address (various uses)
- *
- * @NL80211_ATTR_KEY_DATA: (temporal) key data; for TKIP this consists of
- * 16 bytes encryption key followed by 8 bytes each for TX and RX MIC
- * keys
- * @NL80211_ATTR_KEY_IDX: key ID (u8, 0-3)
- * @NL80211_ATTR_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11
- * section 7.3.2.25.1, e.g. 0x000FAC04)
- * @NL80211_ATTR_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and
- * CCMP keys, each six bytes in little endian
- * @NL80211_ATTR_KEY_DEFAULT: Flag attribute indicating the key is default key
- * @NL80211_ATTR_KEY_DEFAULT_MGMT: Flag attribute indicating the key is the
- * default management key
- * @NL80211_ATTR_CIPHER_SUITES_PAIRWISE: For crypto settings for connect or
- * other commands, indicates which pairwise cipher suites are used
- * @NL80211_ATTR_CIPHER_SUITE_GROUP: For crypto settings for connect or
- * other commands, indicates which group cipher suite is used
- *
- * @NL80211_ATTR_BEACON_INTERVAL: beacon interval in TU
- * @NL80211_ATTR_DTIM_PERIOD: DTIM period for beaconing
- * @NL80211_ATTR_BEACON_HEAD: portion of the beacon before the TIM IE
- * @NL80211_ATTR_BEACON_TAIL: portion of the beacon after the TIM IE
- *
- * @NL80211_ATTR_STA_AID: Association ID for the station (u16)
- * @NL80211_ATTR_STA_FLAGS: flags, nested element with NLA_FLAG attributes of
- * &enum nl80211_sta_flags (deprecated, use %NL80211_ATTR_STA_FLAGS2)
- * @NL80211_ATTR_STA_LISTEN_INTERVAL: listen interval as defined by
- * IEEE 802.11 7.3.1.6 (u16).
- * @NL80211_ATTR_STA_SUPPORTED_RATES: supported rates, array of supported
- * rates as defined by IEEE 802.11 7.3.2.2 but without the length
- * restriction (at most %NL80211_MAX_SUPP_RATES).
- * @NL80211_ATTR_STA_VLAN: interface index of VLAN interface to move station
- * to, or the AP interface the station was originally added to.
- * @NL80211_ATTR_STA_INFO: information about a station, part of station info
- * given for %NL80211_CMD_GET_STATION, nested attribute containing
- * info as possible, see &enum nl80211_sta_info.
- *
- * @NL80211_ATTR_WIPHY_BANDS: Information about an operating bands,
- * consisting of a nested array.
- *
- * @NL80211_ATTR_MESH_ID: mesh id (1-32 bytes).
- * @NL80211_ATTR_STA_PLINK_ACTION: action to perform on the mesh peer link
- * (see &enum nl80211_plink_action).
- * @NL80211_ATTR_MPATH_NEXT_HOP: MAC address of the next hop for a mesh path.
- * @NL80211_ATTR_MPATH_INFO: information about a mesh_path, part of mesh path
- * info given for %NL80211_CMD_GET_MPATH, nested attribute described at
- * &enum nl80211_mpath_info.
- *
- * @NL80211_ATTR_MNTR_FLAGS: flags, nested element with NLA_FLAG attributes of
- * &enum nl80211_mntr_flags.
- *
- * @NL80211_ATTR_REG_ALPHA2: an ISO-3166-alpha2 country code for which the
- * current regulatory domain should be set to or is already set to.
- * For example, 'CR', for Costa Rica. This attribute is used by the kernel
- * to query the CRDA to retrieve one regulatory domain. This attribute can
- * also be used by userspace to query the kernel for the currently set
- * regulatory domain. We chose an alpha2 as that is also used by the
- * IEEE-802.11 country information element to identify a country.
- * Users can also simply ask the wireless core to set regulatory domain
- * to a specific alpha2.
- * @NL80211_ATTR_REG_RULES: a nested array of regulatory domain regulatory
- * rules.
- *
- * @NL80211_ATTR_BSS_CTS_PROT: whether CTS protection is enabled (u8, 0 or 1)
- * @NL80211_ATTR_BSS_SHORT_PREAMBLE: whether short preamble is enabled
- * (u8, 0 or 1)
- * @NL80211_ATTR_BSS_SHORT_SLOT_TIME: whether short slot time enabled
- * (u8, 0 or 1)
- * @NL80211_ATTR_BSS_BASIC_RATES: basic rates, array of basic
- * rates in format defined by IEEE 802.11 7.3.2.2 but without the length
- * restriction (at most %NL80211_MAX_SUPP_RATES).
- *
- * @NL80211_ATTR_HT_CAPABILITY: HT Capability information element (from
- * association request when used with NL80211_CMD_NEW_STATION)
- *
- * @NL80211_ATTR_SUPPORTED_IFTYPES: nested attribute containing all
- * supported interface types, each a flag attribute with the number
- * of the interface mode.
- *
- * @NL80211_ATTR_MGMT_SUBTYPE: Management frame subtype for
- * %NL80211_CMD_SET_MGMT_EXTRA_IE.
- *
- * @NL80211_ATTR_IE: Information element(s) data (used, e.g., with
- * %NL80211_CMD_SET_MGMT_EXTRA_IE).
- *
- * @NL80211_ATTR_MAX_NUM_SCAN_SSIDS: number of SSIDs you can scan with
- * a single scan request, a wiphy attribute.
- * @NL80211_ATTR_MAX_NUM_SCHED_SCAN_SSIDS: number of SSIDs you can
- * scan with a single scheduled scan request, a wiphy attribute.
- * @NL80211_ATTR_MAX_SCAN_IE_LEN: maximum length of information elements
- * that can be added to a scan request
- * @NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN: maximum length of information
- * elements that can be added to a scheduled scan request
- * @NL80211_ATTR_MAX_MATCH_SETS: maximum number of sets that can be
- * used with @NL80211_ATTR_SCHED_SCAN_MATCH, a wiphy attribute.
- *
- * @NL80211_ATTR_SCAN_FREQUENCIES: nested attribute with frequencies (in MHz)
- * @NL80211_ATTR_SCAN_SSIDS: nested attribute with SSIDs, leave out for passive
- * scanning and include a zero-length SSID (wildcard) for wildcard scan
- * @NL80211_ATTR_BSS: scan result BSS
- *
- * @NL80211_ATTR_REG_INITIATOR: indicates who requested the regulatory domain
- * currently in effect. This could be any of the %NL80211_REGDOM_SET_BY_*
- * @NL80211_ATTR_REG_TYPE: indicates the type of the regulatory domain currently
- * set. This can be one of the nl80211_reg_type (%NL80211_REGDOM_TYPE_*)
- *
- * @NL80211_ATTR_SUPPORTED_COMMANDS: wiphy attribute that specifies
- * an array of command numbers (i.e. a mapping index to command number)
- * that the driver for the given wiphy supports.
- *
- * @NL80211_ATTR_FRAME: frame data (binary attribute), including frame header
- * and body, but not FCS; used, e.g., with NL80211_CMD_AUTHENTICATE and
- * NL80211_CMD_ASSOCIATE events
- * @NL80211_ATTR_SSID: SSID (binary attribute, 0..32 octets)
- * @NL80211_ATTR_AUTH_TYPE: AuthenticationType, see &enum nl80211_auth_type,
- * represented as a u32
- * @NL80211_ATTR_REASON_CODE: ReasonCode for %NL80211_CMD_DEAUTHENTICATE and
- * %NL80211_CMD_DISASSOCIATE, u16
- *
- * @NL80211_ATTR_KEY_TYPE: Key Type, see &enum nl80211_key_type, represented as
- * a u32
- *
- * @NL80211_ATTR_FREQ_BEFORE: A channel which has suffered a regulatory change
- * due to considerations from a beacon hint. This attribute reflects
- * the state of the channel _before_ the beacon hint processing. This
- * attributes consists of a nested attribute containing
- * NL80211_FREQUENCY_ATTR_*
- * @NL80211_ATTR_FREQ_AFTER: A channel which has suffered a regulatory change
- * due to considerations from a beacon hint. This attribute reflects
- * the state of the channel _after_ the beacon hint processing. This
- * attributes consists of a nested attribute containing
- * NL80211_FREQUENCY_ATTR_*
- *
- * @NL80211_ATTR_CIPHER_SUITES: a set of u32 values indicating the supported
- * cipher suites
- *
- * @NL80211_ATTR_FREQ_FIXED: a flag indicating the IBSS should not try to look
- * for other networks on different channels
- *
- * @NL80211_ATTR_TIMED_OUT: a flag indicating than an operation timed out; this
- * is used, e.g., with %NL80211_CMD_AUTHENTICATE event
- *
- * @NL80211_ATTR_USE_MFP: Whether management frame protection (IEEE 802.11w) is
- * used for the association (&enum nl80211_mfp, represented as a u32);
- * this attribute can be used with %NL80211_CMD_ASSOCIATE and
- * %NL80211_CMD_CONNECT requests. %NL80211_MFP_OPTIONAL is not allowed for
- * %NL80211_CMD_ASSOCIATE since user space SME is expected and hence, it
- * must have decided whether to use management frame protection or not.
- * Setting %NL80211_MFP_OPTIONAL with a %NL80211_CMD_CONNECT request will
- * let the driver (or the firmware) decide whether to use MFP or not.
- *
- * @NL80211_ATTR_STA_FLAGS2: Attribute containing a
- * &struct nl80211_sta_flag_update.
- *
- * @NL80211_ATTR_CONTROL_PORT: A flag indicating whether user space controls
- * IEEE 802.1X port, i.e., sets/clears %NL80211_STA_FLAG_AUTHORIZED, in
- * station mode. If the flag is included in %NL80211_CMD_ASSOCIATE
- * request, the driver will assume that the port is unauthorized until
- * authorized by user space. Otherwise, port is marked authorized by
- * default in station mode.
- * @NL80211_ATTR_CONTROL_PORT_ETHERTYPE: A 16-bit value indicating the
- * ethertype that will be used for key negotiation. It can be
- * specified with the associate and connect commands. If it is not
- * specified, the value defaults to 0x888E (PAE, 802.1X). This
- * attribute is also used as a flag in the wiphy information to
- * indicate that protocols other than PAE are supported.
- * @NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT: When included along with
- * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, indicates that the custom
- * ethertype frames used for key negotiation must not be encrypted.
- * @NL80211_ATTR_CONTROL_PORT_OVER_NL80211: A flag indicating whether control
- * port frames (e.g. of type given in %NL80211_ATTR_CONTROL_PORT_ETHERTYPE)
- * will be sent directly to the network interface or sent via the NL80211
- * socket. If this attribute is missing, then legacy behavior of sending
- * control port frames directly to the network interface is used. If the
- * flag is included, then control port frames are sent over NL80211 instead
- * using %CMD_CONTROL_PORT_FRAME. If control port routing over NL80211 is
- * to be used then userspace must also use the %NL80211_ATTR_SOCKET_OWNER
- * flag. When used with %NL80211_ATTR_CONTROL_PORT_NO_PREAUTH, pre-auth
- * frames are not forwared over the control port.
- *
- * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver.
- * We recommend using nested, driver-specific attributes within this.
- *
- * @NL80211_ATTR_DISCONNECTED_BY_AP: A flag indicating that the DISCONNECT
- * event was due to the AP disconnecting the station, and not due to
- * a local disconnect request.
- * @NL80211_ATTR_STATUS_CODE: StatusCode for the %NL80211_CMD_CONNECT
- * event (u16)
- * @NL80211_ATTR_PRIVACY: Flag attribute, used with connect(), indicating
- * that protected APs should be used. This is also used with NEW_BEACON to
- * indicate that the BSS is to use protection.
- *
- * @NL80211_ATTR_CIPHERS_PAIRWISE: Used with CONNECT, ASSOCIATE, and NEW_BEACON
- * to indicate which unicast key ciphers will be used with the connection
- * (an array of u32).
- * @NL80211_ATTR_CIPHER_GROUP: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
- * indicate which group key cipher will be used with the connection (a
- * u32).
- * @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
- * indicate which WPA version(s) the AP we want to associate with is using
- * (a u32 with flags from &enum nl80211_wpa_versions).
- * @NL80211_ATTR_AKM_SUITES: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
- * indicate which key management algorithm(s) to use (an array of u32).
- * This attribute is also sent in response to @NL80211_CMD_GET_WIPHY,
- * indicating the supported AKM suites, intended for specific drivers which
- * implement SME and have constraints on which AKMs are supported and also
- * the cases where an AKM support is offloaded to the driver/firmware.
- * If there is no such notification from the driver, user space should
- * assume the driver supports all the AKM suites.
- *
- * @NL80211_ATTR_REQ_IE: (Re)association request information elements as
- * sent out by the card, for ROAM and successful CONNECT events.
- * @NL80211_ATTR_RESP_IE: (Re)association response information elements as
- * sent by peer, for ROAM and successful CONNECT events.
- *
- * @NL80211_ATTR_PREV_BSSID: previous BSSID, to be used in ASSOCIATE and CONNECT
- * commands to specify a request to reassociate within an ESS, i.e., to use
- * Reassociate Request frame (with the value of this attribute in the
- * Current AP address field) instead of Association Request frame which is
- * used for the initial association to an ESS.
- *
- * @NL80211_ATTR_KEY: key information in a nested attribute with
- * %NL80211_KEY_* sub-attributes
- * @NL80211_ATTR_KEYS: array of keys for static WEP keys for connect()
- * and join_ibss(), key information is in a nested attribute each
- * with %NL80211_KEY_* sub-attributes
- *
- * @NL80211_ATTR_PID: Process ID of a network namespace.
- *
- * @NL80211_ATTR_GENERATION: Used to indicate consistent snapshots for
- * dumps. This number increases whenever the object list being
- * dumped changes, and as such userspace can verify that it has
- * obtained a complete and consistent snapshot by verifying that
- * all dump messages contain the same generation number. If it
- * changed then the list changed and the dump should be repeated
- * completely from scratch.
- *
- * @NL80211_ATTR_4ADDR: Use 4-address frames on a virtual interface
- *
- * @NL80211_ATTR_SURVEY_INFO: survey information about a channel, part of
- * the survey response for %NL80211_CMD_GET_SURVEY, nested attribute
- * containing info as possible, see &enum survey_info.
- *
- * @NL80211_ATTR_PMKID: PMK material for PMKSA caching.
- * @NL80211_ATTR_MAX_NUM_PMKIDS: maximum number of PMKIDs a firmware can
- * cache, a wiphy attribute.
- *
- * @NL80211_ATTR_DURATION: Duration of an operation in milliseconds, u32.
- * @NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION: Device attribute that
- * specifies the maximum duration that can be requested with the
- * remain-on-channel operation, in milliseconds, u32.
- *
- * @NL80211_ATTR_COOKIE: Generic 64-bit cookie to identify objects.
- *
- * @NL80211_ATTR_TX_RATES: Nested set of attributes
- * (enum nl80211_tx_rate_attributes) describing TX rates per band. The
- * enum nl80211_band value is used as the index (nla_type() of the nested
- * data. If a band is not included, it will be configured to allow all
- * rates based on negotiated supported rates information. This attribute
- * is used with %NL80211_CMD_SET_TX_BITRATE_MASK and with starting AP,
- * and joining mesh networks (not IBSS yet). In the later case, it must
- * specify just a single bitrate, which is to be used for the beacon.
- * The driver must also specify support for this with the extended
- * features NL80211_EXT_FEATURE_BEACON_RATE_LEGACY,
- * NL80211_EXT_FEATURE_BEACON_RATE_HT,
- * NL80211_EXT_FEATURE_BEACON_RATE_VHT and
- * NL80211_EXT_FEATURE_BEACON_RATE_HE.
- *
- * @NL80211_ATTR_FRAME_MATCH: A binary attribute which typically must contain
- * at least one byte, currently used with @NL80211_CMD_REGISTER_FRAME.
- * @NL80211_ATTR_FRAME_TYPE: A u16 indicating the frame type/subtype for the
- * @NL80211_CMD_REGISTER_FRAME command.
- * @NL80211_ATTR_TX_FRAME_TYPES: wiphy capability attribute, which is a
- * nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing
- * information about which frame types can be transmitted with
- * %NL80211_CMD_FRAME.
- * @NL80211_ATTR_RX_FRAME_TYPES: wiphy capability attribute, which is a
- * nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing
- * information about which frame types can be registered for RX.
- *
- * @NL80211_ATTR_ACK: Flag attribute indicating that the frame was
- * acknowledged by the recipient.
- *
- * @NL80211_ATTR_PS_STATE: powersave state, using &enum nl80211_ps_state values.
- *
- * @NL80211_ATTR_CQM: connection quality monitor configuration in a
- * nested attribute with %NL80211_ATTR_CQM_* sub-attributes.
- *
- * @NL80211_ATTR_LOCAL_STATE_CHANGE: Flag attribute to indicate that a command
- * is requesting a local authentication/association state change without
- * invoking actual management frame exchange. This can be used with
- * NL80211_CMD_AUTHENTICATE, NL80211_CMD_DEAUTHENTICATE,
- * NL80211_CMD_DISASSOCIATE.
- *
- * @NL80211_ATTR_AP_ISOLATE: (AP mode) Do not forward traffic between stations
- * connected to this BSS.
- *
- * @NL80211_ATTR_WIPHY_TX_POWER_SETTING: Transmit power setting type. See
- * &enum nl80211_tx_power_setting for possible values.
- * @NL80211_ATTR_WIPHY_TX_POWER_LEVEL: Transmit power level in signed mBm units.
- * This is used in association with @NL80211_ATTR_WIPHY_TX_POWER_SETTING
- * for non-automatic settings.
- *
- * @NL80211_ATTR_SUPPORT_IBSS_RSN: The device supports IBSS RSN, which mostly
- * means support for per-station GTKs.
- *
- * @NL80211_ATTR_WIPHY_ANTENNA_TX: Bitmap of allowed antennas for transmitting.
- * This can be used to mask out antennas which are not attached or should
- * not be used for transmitting. If an antenna is not selected in this
- * bitmap the hardware is not allowed to transmit on this antenna.
- *
- * Each bit represents one antenna, starting with antenna 1 at the first
- * bit. Depending on which antennas are selected in the bitmap, 802.11n
- * drivers can derive which chainmasks to use (if all antennas belonging to
- * a particular chain are disabled this chain should be disabled) and if
- * a chain has diversity antennas wether diversity should be used or not.
- * HT capabilities (STBC, TX Beamforming, Antenna selection) can be
- * derived from the available chains after applying the antenna mask.
- * Non-802.11n drivers can derive wether to use diversity or not.
- * Drivers may reject configurations or RX/TX mask combinations they cannot
- * support by returning -EINVAL.
- *
- * @NL80211_ATTR_WIPHY_ANTENNA_RX: Bitmap of allowed antennas for receiving.
- * This can be used to mask out antennas which are not attached or should
- * not be used for receiving. If an antenna is not selected in this bitmap
- * the hardware should not be configured to receive on this antenna.
- * For a more detailed description see @NL80211_ATTR_WIPHY_ANTENNA_TX.
- *
- * @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX: Bitmap of antennas which are available
- * for configuration as TX antennas via the above parameters.
- *
- * @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX: Bitmap of antennas which are available
- * for configuration as RX antennas via the above parameters.
- *
- * @NL80211_ATTR_MCAST_RATE: Multicast tx rate (in 100 kbps) for IBSS
- *
- * @NL80211_ATTR_OFFCHANNEL_TX_OK: For management frame TX, the frame may be
- * transmitted on another channel when the channel given doesn't match
- * the current channel. If the current channel doesn't match and this
- * flag isn't set, the frame will be rejected. This is also used as an
- * nl80211 capability flag.
- *
- * @NL80211_ATTR_BSS_HT_OPMODE: HT operation mode (u16)
- *
- * @NL80211_ATTR_KEY_DEFAULT_TYPES: A nested attribute containing flags
- * attributes, specifying what a key should be set as default as.
- * See &enum nl80211_key_default_types.
- *
- * @NL80211_ATTR_MESH_SETUP: Optional mesh setup parameters. These cannot be
- * changed once the mesh is active.
- * @NL80211_ATTR_MESH_CONFIG: Mesh configuration parameters, a nested attribute
- * containing attributes from &enum nl80211_meshconf_params.
- * @NL80211_ATTR_SUPPORT_MESH_AUTH: Currently, this means the underlying driver
- * allows auth frames in a mesh to be passed to userspace for processing via
- * the @NL80211_MESH_SETUP_USERSPACE_AUTH flag.
- * @NL80211_ATTR_STA_PLINK_STATE: The state of a mesh peer link as defined in
- * &enum nl80211_plink_state. Used when userspace is driving the peer link
- * management state machine. @NL80211_MESH_SETUP_USERSPACE_AMPE or
- * @NL80211_MESH_SETUP_USERSPACE_MPM must be enabled.
- *
- * @NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED: indicates, as part of the wiphy
- * capabilities, the supported WoWLAN triggers
- * @NL80211_ATTR_WOWLAN_TRIGGERS: used by %NL80211_CMD_SET_WOWLAN to
- * indicate which WoW triggers should be enabled. This is also
- * used by %NL80211_CMD_GET_WOWLAN to get the currently enabled WoWLAN
- * triggers.
- *
- * @NL80211_ATTR_SCHED_SCAN_INTERVAL: Interval between scheduled scan
- * cycles, in msecs.
- *
- * @NL80211_ATTR_SCHED_SCAN_MATCH: Nested attribute with one or more
- * sets of attributes to match during scheduled scans. Only BSSs
- * that match any of the sets will be reported. These are
- * pass-thru filter rules.
- * For a match to succeed, the BSS must match all attributes of a
- * set. Since not every hardware supports matching all types of
- * attributes, there is no guarantee that the reported BSSs are
- * fully complying with the match sets and userspace needs to be
- * able to ignore them by itself.
- * Thus, the implementation is somewhat hardware-dependent, but
- * this is only an optimization and the userspace application
- * needs to handle all the non-filtered results anyway.
- * If the match attributes don't make sense when combined with
- * the values passed in @NL80211_ATTR_SCAN_SSIDS (eg. if an SSID
- * is included in the probe request, but the match attributes
- * will never let it go through), -EINVAL may be returned.
- * If omitted, no filtering is done.
- *
- * @NL80211_ATTR_INTERFACE_COMBINATIONS: Nested attribute listing the supported
- * interface combinations. In each nested item, it contains attributes
- * defined in &enum nl80211_if_combination_attrs.
- * @NL80211_ATTR_SOFTWARE_IFTYPES: Nested attribute (just like
- * %NL80211_ATTR_SUPPORTED_IFTYPES) containing the interface types that
- * are managed in software: interfaces of these types aren't subject to
- * any restrictions in their number or combinations.
- *
- * @NL80211_ATTR_REKEY_DATA: nested attribute containing the information
- * necessary for GTK rekeying in the device, see &enum nl80211_rekey_data.
- *
- * @NL80211_ATTR_SCAN_SUPP_RATES: rates per to be advertised as supported in scan,
- * nested array attribute containing an entry for each band, with the entry
- * being a list of supported rates as defined by IEEE 802.11 7.3.2.2 but
- * without the length restriction (at most %NL80211_MAX_SUPP_RATES).
- *
- * @NL80211_ATTR_HIDDEN_SSID: indicates whether SSID is to be hidden from Beacon
- * and Probe Response (when response to wildcard Probe Request); see
- * &enum nl80211_hidden_ssid, represented as a u32
- *
- * @NL80211_ATTR_IE_PROBE_RESP: Information element(s) for Probe Response frame.
- * This is used with %NL80211_CMD_NEW_BEACON and %NL80211_CMD_SET_BEACON to
- * provide extra IEs (e.g., WPS/P2P IE) into Probe Response frames when the
- * driver (or firmware) replies to Probe Request frames.
- * @NL80211_ATTR_IE_ASSOC_RESP: Information element(s) for (Re)Association
- * Response frames. This is used with %NL80211_CMD_NEW_BEACON and
- * %NL80211_CMD_SET_BEACON to provide extra IEs (e.g., WPS/P2P IE) into
- * (Re)Association Response frames when the driver (or firmware) replies to
- * (Re)Association Request frames.
- *
- * @NL80211_ATTR_STA_WME: Nested attribute containing the wme configuration
- * of the station, see &enum nl80211_sta_wme_attr.
- * @NL80211_ATTR_SUPPORT_AP_UAPSD: the device supports uapsd when working
- * as AP.
- *
- * @NL80211_ATTR_ROAM_SUPPORT: Indicates whether the firmware is capable of
- * roaming to another AP in the same ESS if the signal lever is low.
- *
- * @NL80211_ATTR_PMKSA_CANDIDATE: Nested attribute containing the PMKSA caching
- * candidate information, see &enum nl80211_pmksa_candidate_attr.
- *
- * @NL80211_ATTR_TX_NO_CCK_RATE: Indicates whether to use CCK rate or not
- * for management frames transmission. In order to avoid p2p probe/action
- * frames are being transmitted at CCK rate in 2GHz band, the user space
- * applications use this attribute.
- * This attribute is used with %NL80211_CMD_TRIGGER_SCAN and
- * %NL80211_CMD_FRAME commands.
- *
- * @NL80211_ATTR_TDLS_ACTION: Low level TDLS action code (e.g. link setup
- * request, link setup confirm, link teardown, etc.). Values are
- * described in the TDLS (802.11z) specification.
- * @NL80211_ATTR_TDLS_DIALOG_TOKEN: Non-zero token for uniquely identifying a
- * TDLS conversation between two devices.
- * @NL80211_ATTR_TDLS_OPERATION: High level TDLS operation; see
- * &enum nl80211_tdls_operation, represented as a u8.
- * @NL80211_ATTR_TDLS_SUPPORT: A flag indicating the device can operate
- * as a TDLS peer sta.
- * @NL80211_ATTR_TDLS_EXTERNAL_SETUP: The TDLS discovery/setup and teardown
- * procedures should be performed by sending TDLS packets via
- * %NL80211_CMD_TDLS_MGMT. Otherwise %NL80211_CMD_TDLS_OPER should be
- * used for asking the driver to perform a TDLS operation.
- *
- * @NL80211_ATTR_DEVICE_AP_SME: This u32 attribute may be listed for devices
- * that have AP support to indicate that they have the AP SME integrated
- * with support for the features listed in this attribute, see
- * &enum nl80211_ap_sme_features.
- *
- * @NL80211_ATTR_DONT_WAIT_FOR_ACK: Used with %NL80211_CMD_FRAME, this tells
- * the driver to not wait for an acknowledgement. Note that due to this,
- * it will also not give a status callback nor return a cookie. This is
- * mostly useful for probe responses to save airtime.
- *
- * @NL80211_ATTR_FEATURE_FLAGS: This u32 attribute contains flags from
- * &enum nl80211_feature_flags and is advertised in wiphy information.
- * @NL80211_ATTR_PROBE_RESP_OFFLOAD: Indicates that the HW responds to probe
- * requests while operating in AP-mode.
- * This attribute holds a bitmap of the supported protocols for
- * offloading (see &enum nl80211_probe_resp_offload_support_attr).
- *
- * @NL80211_ATTR_PROBE_RESP: Probe Response template data. Contains the entire
- * probe-response frame. The DA field in the 802.11 header is zero-ed out,
- * to be filled by the FW.
- * @NL80211_ATTR_DISABLE_HT: Force HT capable interfaces to disable
- * this feature during association. This is a flag attribute.
- * Currently only supported in mac80211 drivers.
- * @NL80211_ATTR_DISABLE_VHT: Force VHT capable interfaces to disable
- * this feature during association. This is a flag attribute.
- * Currently only supported in mac80211 drivers.
- * @NL80211_ATTR_DISABLE_HE: Force HE capable interfaces to disable
- * this feature during association. This is a flag attribute.
- * Currently only supported in mac80211 drivers.
- * @NL80211_ATTR_HT_CAPABILITY_MASK: Specify which bits of the
- * ATTR_HT_CAPABILITY to which attention should be paid.
- * Currently, only mac80211 NICs support this feature.
- * The values that may be configured are:
- * MCS rates, MAX-AMSDU, HT-20-40 and HT_CAP_SGI_40
- * AMPDU density and AMPDU factor.
- * All values are treated as suggestions and may be ignored
- * by the driver as required. The actual values may be seen in
- * the station debugfs ht_caps file.
- *
- * @NL80211_ATTR_DFS_REGION: region for regulatory rules which this country
- * abides to when initiating radiation on DFS channels. A country maps
- * to one DFS region.
- *
- * @NL80211_ATTR_NOACK_MAP: This u16 bitmap contains the No Ack Policy of
- * up to 16 TIDs.
- *
- * @NL80211_ATTR_INACTIVITY_TIMEOUT: timeout value in seconds, this can be
- * used by the drivers which has MLME in firmware and does not have support
- * to report per station tx/rx activity to free up the station entry from
- * the list. This needs to be used when the driver advertises the
- * capability to timeout the stations.
- *
- * @NL80211_ATTR_RX_SIGNAL_DBM: signal strength in dBm (as a 32-bit int);
- * this attribute is (depending on the driver capabilities) added to
- * received frames indicated with %NL80211_CMD_FRAME.
- *
- * @NL80211_ATTR_BG_SCAN_PERIOD: Background scan period in seconds
- * or 0 to disable background scan.
- *
- * @NL80211_ATTR_USER_REG_HINT_TYPE: type of regulatory hint passed from
- * userspace. If unset it is assumed the hint comes directly from
- * a user. If set code could specify exactly what type of source
- * was used to provide the hint. For the different types of
- * allowed user regulatory hints see nl80211_user_reg_hint_type.
- *
- * @NL80211_ATTR_CONN_FAILED_REASON: The reason for which AP has rejected
- * the connection request from a station. nl80211_connect_failed_reason
- * enum has different reasons of connection failure.
- *
- * @NL80211_ATTR_AUTH_DATA: Fields and elements in Authentication frames.
- * This contains the authentication frame body (non-IE and IE data),
- * excluding the Authentication algorithm number, i.e., starting at the
- * Authentication transaction sequence number field. It is used with
- * authentication algorithms that need special fields to be added into
- * the frames (SAE and FILS). Currently, only the SAE cases use the
- * initial two fields (Authentication transaction sequence number and
- * Status code). However, those fields are included in the attribute data
- * for all authentication algorithms to keep the attribute definition
- * consistent.
- *
- * @NL80211_ATTR_VHT_CAPABILITY: VHT Capability information element (from
- * association request when used with NL80211_CMD_NEW_STATION)
- *
- * @NL80211_ATTR_SCAN_FLAGS: scan request control flags (u32)
- *
- * @NL80211_ATTR_P2P_CTWINDOW: P2P GO Client Traffic Window (u8), used with
- * the START_AP and SET_BSS commands
- * @NL80211_ATTR_P2P_OPPPS: P2P GO opportunistic PS (u8), used with the
- * START_AP and SET_BSS commands. This can have the values 0 or 1;
- * if not given in START_AP 0 is assumed, if not given in SET_BSS
- * no change is made.
- *
- * @NL80211_ATTR_LOCAL_MESH_POWER_MODE: local mesh STA link-specific power mode
- * defined in &enum nl80211_mesh_power_mode.
- *
- * @NL80211_ATTR_ACL_POLICY: ACL policy, see &enum nl80211_acl_policy,
- * carried in a u32 attribute
- *
- * @NL80211_ATTR_MAC_ADDRS: Array of nested MAC addresses, used for
- * MAC ACL.
- *
- * @NL80211_ATTR_MAC_ACL_MAX: u32 attribute to advertise the maximum
- * number of MAC addresses that a device can support for MAC
- * ACL.
- *
- * @NL80211_ATTR_RADAR_EVENT: Type of radar event for notification to userspace,
- * contains a value of enum nl80211_radar_event (u32).
- *
- * @NL80211_ATTR_EXT_CAPA: 802.11 extended capabilities that the kernel driver
- * has and handles. The format is the same as the IE contents. See
- * 802.11-2012 8.4.2.29 for more information.
- * @NL80211_ATTR_EXT_CAPA_MASK: Extended capabilities that the kernel driver
- * has set in the %NL80211_ATTR_EXT_CAPA value, for multibit fields.
- *
- * @NL80211_ATTR_STA_CAPABILITY: Station capabilities (u16) are advertised to
- * the driver, e.g., to enable TDLS power save (PU-APSD).
- *
- * @NL80211_ATTR_STA_EXT_CAPABILITY: Station extended capabilities are
- * advertised to the driver, e.g., to enable TDLS off channel operations
- * and PU-APSD.
- *
- * @NL80211_ATTR_PROTOCOL_FEATURES: global nl80211 feature flags, see
- * &enum nl80211_protocol_features, the attribute is a u32.
- *
- * @NL80211_ATTR_SPLIT_WIPHY_DUMP: flag attribute, userspace supports
- * receiving the data for a single wiphy split across multiple
- * messages, given with wiphy dump message
- *
- * @NL80211_ATTR_MDID: Mobility Domain Identifier
- *
- * @NL80211_ATTR_IE_RIC: Resource Information Container Information
- * Element
- *
- * @NL80211_ATTR_CRIT_PROT_ID: critical protocol identifier requiring increased
- * reliability, see &enum nl80211_crit_proto_id (u16).
- * @NL80211_ATTR_MAX_CRIT_PROT_DURATION: duration in milliseconds in which
- * the connection should have increased reliability (u16).
- *
- * @NL80211_ATTR_PEER_AID: Association ID for the peer TDLS station (u16).
- * This is similar to @NL80211_ATTR_STA_AID but with a difference of being
- * allowed to be used with the first @NL80211_CMD_SET_STATION command to
- * update a TDLS peer STA entry.
- *
- * @NL80211_ATTR_COALESCE_RULE: Coalesce rule information.
- *
- * @NL80211_ATTR_CH_SWITCH_COUNT: u32 attribute specifying the number of TBTT's
- * until the channel switch event.
- * @NL80211_ATTR_CH_SWITCH_BLOCK_TX: flag attribute specifying that transmission
- * must be blocked on the current channel (before the channel switch
- * operation). Also included in the channel switch started event if quiet
- * was requested by the AP.
- * @NL80211_ATTR_CSA_IES: Nested set of attributes containing the IE information
- * for the time while performing a channel switch.
- * @NL80211_ATTR_CNTDWN_OFFS_BEACON: An array of offsets (u16) to the channel
- * switch or color change counters in the beacons tail (%NL80211_ATTR_BEACON_TAIL).
- * @NL80211_ATTR_CNTDWN_OFFS_PRESP: An array of offsets (u16) to the channel
- * switch or color change counters in the probe response (%NL80211_ATTR_PROBE_RESP).
- *
- * @NL80211_ATTR_RXMGMT_FLAGS: flags for nl80211_send_mgmt(), u32.
- * As specified in the &enum nl80211_rxmgmt_flags.
- *
- * @NL80211_ATTR_STA_SUPPORTED_CHANNELS: array of supported channels.
- *
- * @NL80211_ATTR_STA_SUPPORTED_OPER_CLASSES: array of supported
- * operating classes.
- *
- * @NL80211_ATTR_HANDLE_DFS: A flag indicating whether user space
- * controls DFS operation in IBSS mode. If the flag is included in
- * %NL80211_CMD_JOIN_IBSS request, the driver will allow use of DFS
- * channels and reports radar events to userspace. Userspace is required
- * to react to radar events, e.g. initiate a channel switch or leave the
- * IBSS network.
- *
- * @NL80211_ATTR_SUPPORT_5_MHZ: A flag indicating that the device supports
- * 5 MHz channel bandwidth.
- * @NL80211_ATTR_SUPPORT_10_MHZ: A flag indicating that the device supports
- * 10 MHz channel bandwidth.
- *
- * @NL80211_ATTR_OPMODE_NOTIF: Operating mode field from Operating Mode
- * Notification Element based on association request when used with
- * %NL80211_CMD_NEW_STATION or %NL80211_CMD_SET_STATION (only when
- * %NL80211_FEATURE_FULL_AP_CLIENT_STATE is supported, or with TDLS);
- * u8 attribute.
- *
- * @NL80211_ATTR_VENDOR_ID: The vendor ID, either a 24-bit OUI or, if
- * %NL80211_VENDOR_ID_IS_LINUX is set, a special Linux ID (not used yet)
- * @NL80211_ATTR_VENDOR_SUBCMD: vendor sub-command
- * @NL80211_ATTR_VENDOR_DATA: data for the vendor command, if any; this
- * attribute is also used for vendor command feature advertisement
- * @NL80211_ATTR_VENDOR_EVENTS: used for event list advertising in the wiphy
- * info, containing a nested array of possible events
- *
- * @NL80211_ATTR_QOS_MAP: IP DSCP mapping for Interworking QoS mapping. This
- * data is in the format defined for the payload of the QoS Map Set element
- * in IEEE Std 802.11-2012, 8.4.2.97.
- *
- * @NL80211_ATTR_MAC_HINT: MAC address recommendation as initial BSS
- * @NL80211_ATTR_WIPHY_FREQ_HINT: frequency of the recommended initial BSS
- *
- * @NL80211_ATTR_MAX_AP_ASSOC_STA: Device attribute that indicates how many
- * associated stations are supported in AP mode (including P2P GO); u32.
- * Since drivers may not have a fixed limit on the maximum number (e.g.,
- * other concurrent operations may affect this), drivers are allowed to
- * advertise values that cannot always be met. In such cases, an attempt
- * to add a new station entry with @NL80211_CMD_NEW_STATION may fail.
- *
- * @NL80211_ATTR_CSA_C_OFFSETS_TX: An array of csa counter offsets (u16) which
- * should be updated when the frame is transmitted.
- * @NL80211_ATTR_MAX_CSA_COUNTERS: U8 attribute used to advertise the maximum
- * supported number of csa counters.
- *
- * @NL80211_ATTR_TDLS_PEER_CAPABILITY: flags for TDLS peer capabilities, u32.
- * As specified in the &enum nl80211_tdls_peer_capability.
- *
- * @NL80211_ATTR_SOCKET_OWNER: Flag attribute, if set during interface
- * creation then the new interface will be owned by the netlink socket
- * that created it and will be destroyed when the socket is closed.
- * If set during scheduled scan start then the new scan req will be
- * owned by the netlink socket that created it and the scheduled scan will
- * be stopped when the socket is closed.
- * If set during configuration of regulatory indoor operation then the
- * regulatory indoor configuration would be owned by the netlink socket
- * that configured the indoor setting, and the indoor operation would be
- * cleared when the socket is closed.
- * If set during NAN interface creation, the interface will be destroyed
- * if the socket is closed just like any other interface. Moreover, NAN
- * notifications will be sent in unicast to that socket. Without this
- * attribute, the notifications will be sent to the %NL80211_MCGRP_NAN
- * multicast group.
- * If set during %NL80211_CMD_ASSOCIATE or %NL80211_CMD_CONNECT the
- * station will deauthenticate when the socket is closed.
- * If set during %NL80211_CMD_JOIN_IBSS the IBSS will be automatically
- * torn down when the socket is closed.
- * If set during %NL80211_CMD_JOIN_MESH the mesh setup will be
- * automatically torn down when the socket is closed.
- * If set during %NL80211_CMD_START_AP the AP will be automatically
- * disabled when the socket is closed.
- *
- * @NL80211_ATTR_TDLS_INITIATOR: flag attribute indicating the current end is
- * the TDLS link initiator.
- *
- * @NL80211_ATTR_USE_RRM: flag for indicating whether the current connection
- * shall support Radio Resource Measurements (11k). This attribute can be
- * used with %NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests.
- * User space applications are expected to use this flag only if the
- * underlying device supports these minimal RRM features:
- * %NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES,
- * %NL80211_FEATURE_QUIET,
- * Or, if global RRM is supported, see:
- * %NL80211_EXT_FEATURE_RRM
- * If this flag is used, driver must add the Power Capabilities IE to the
- * association request. In addition, it must also set the RRM capability
- * flag in the association request's Capability Info field.
- *
- * @NL80211_ATTR_WIPHY_DYN_ACK: flag attribute used to enable ACK timeout
- * estimation algorithm (dynack). In order to activate dynack
- * %NL80211_FEATURE_ACKTO_ESTIMATION feature flag must be set by lower
- * drivers to indicate dynack capability. Dynack is automatically disabled
- * setting valid value for coverage class.
- *
- * @NL80211_ATTR_TSID: a TSID value (u8 attribute)
- * @NL80211_ATTR_USER_PRIO: user priority value (u8 attribute)
- * @NL80211_ATTR_ADMITTED_TIME: admitted time in units of 32 microseconds
- * (per second) (u16 attribute)
- *
- * @NL80211_ATTR_SMPS_MODE: SMPS mode to use (ap mode). see
- * &enum nl80211_smps_mode.
- *
- * @NL80211_ATTR_OPER_CLASS: operating class
- *
- * @NL80211_ATTR_MAC_MASK: MAC address mask
- *
- * @NL80211_ATTR_WIPHY_SELF_MANAGED_REG: flag attribute indicating this device
- * is self-managing its regulatory information and any regulatory domain
- * obtained from it is coming from the device's wiphy and not the global
- * cfg80211 regdomain.
- *
- * @NL80211_ATTR_EXT_FEATURES: extended feature flags contained in a byte
- * array. The feature flags are identified by their bit index (see &enum
- * nl80211_ext_feature_index). The bit index is ordered starting at the
- * least-significant bit of the first byte in the array, ie. bit index 0
- * is located at bit 0 of byte 0. bit index 25 would be located at bit 1
- * of byte 3 (u8 array).
- *
- * @NL80211_ATTR_SURVEY_RADIO_STATS: Request overall radio statistics to be
- * returned along with other survey data. If set, @NL80211_CMD_GET_SURVEY
- * may return a survey entry without a channel indicating global radio
- * statistics (only some values are valid and make sense.)
- * For devices that don't return such an entry even then, the information
- * should be contained in the result as the sum of the respective counters
- * over all channels.
- *
- * @NL80211_ATTR_SCHED_SCAN_DELAY: delay before the first cycle of a
- * scheduled scan is started. Or the delay before a WoWLAN
- * net-detect scan is started, counting from the moment the
- * system is suspended. This value is a u32, in seconds.
- * @NL80211_ATTR_REG_INDOOR: flag attribute, if set indicates that the device
- * is operating in an indoor environment.
- *
- * @NL80211_ATTR_MAX_NUM_SCHED_SCAN_PLANS: maximum number of scan plans for
- * scheduled scan supported by the device (u32), a wiphy attribute.
- * @NL80211_ATTR_MAX_SCAN_PLAN_INTERVAL: maximum interval (in seconds) for
- * a scan plan (u32), a wiphy attribute.
- * @NL80211_ATTR_MAX_SCAN_PLAN_ITERATIONS: maximum number of iterations in
- * a scan plan (u32), a wiphy attribute.
- * @NL80211_ATTR_SCHED_SCAN_PLANS: a list of scan plans for scheduled scan.
- * Each scan plan defines the number of scan iterations and the interval
- * between scans. The last scan plan will always run infinitely,
- * thus it must not specify the number of iterations, only the interval
- * between scans. The scan plans are executed sequentially.
- * Each scan plan is a nested attribute of &enum nl80211_sched_scan_plan.
- * @NL80211_ATTR_PBSS: flag attribute. If set it means operate
- * in a PBSS. Specified in %NL80211_CMD_CONNECT to request
- * connecting to a PCP, and in %NL80211_CMD_START_AP to start
- * a PCP instead of AP. Relevant for DMG networks only.
- * @NL80211_ATTR_BSS_SELECT: nested attribute for driver supporting the
- * BSS selection feature. When used with %NL80211_CMD_GET_WIPHY it contains
- * attributes according &enum nl80211_bss_select_attr to indicate what
- * BSS selection behaviours are supported. When used with %NL80211_CMD_CONNECT
- * it contains the behaviour-specific attribute containing the parameters for
- * BSS selection to be done by driver and/or firmware.
- *
- * @NL80211_ATTR_STA_SUPPORT_P2P_PS: whether P2P PS mechanism supported
- * or not. u8, one of the values of &enum nl80211_sta_p2p_ps_status
- *
- * @NL80211_ATTR_PAD: attribute used for padding for 64-bit alignment
- *
- * @NL80211_ATTR_IFTYPE_EXT_CAPA: Nested attribute of the following attributes:
- * %NL80211_ATTR_IFTYPE, %NL80211_ATTR_EXT_CAPA,
- * %NL80211_ATTR_EXT_CAPA_MASK, to specify the extended capabilities per
- * interface type.
- *
- * @NL80211_ATTR_MU_MIMO_GROUP_DATA: array of 24 bytes that defines a MU-MIMO
- * groupID for monitor mode.
- * The first 8 bytes are a mask that defines the membership in each
- * group (there are 64 groups, group 0 and 63 are reserved),
- * each bit represents a group and set to 1 for being a member in
- * that group and 0 for not being a member.
- * The remaining 16 bytes define the position in each group: 2 bits for
- * each group.
- * (smaller group numbers represented on most significant bits and bigger
- * group numbers on least significant bits.)
- * This attribute is used only if all interfaces are in monitor mode.
- * Set this attribute in order to monitor packets using the given MU-MIMO
- * groupID data.
- * to turn off that feature set all the bits of the groupID to zero.
- * @NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR: mac address for the sniffer to follow
- * when using MU-MIMO air sniffer.
- * to turn that feature off set an invalid mac address
- * (e.g. FF:FF:FF:FF:FF:FF)
- *
- * @NL80211_ATTR_SCAN_START_TIME_TSF: The time at which the scan was actually
- * started (u64). The time is the TSF of the BSS the interface that
- * requested the scan is connected to (if available, otherwise this
- * attribute must not be included).
- * @NL80211_ATTR_SCAN_START_TIME_TSF_BSSID: The BSS according to which
- * %NL80211_ATTR_SCAN_START_TIME_TSF is set.
- * @NL80211_ATTR_MEASUREMENT_DURATION: measurement duration in TUs (u16). If
- * %NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY is not set, this is the
- * maximum measurement duration allowed. This attribute is used with
- * measurement requests. It can also be used with %NL80211_CMD_TRIGGER_SCAN
- * if the scan is used for beacon report radio measurement.
- * @NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY: flag attribute that indicates
- * that the duration specified with %NL80211_ATTR_MEASUREMENT_DURATION is
- * mandatory. If this flag is not set, the duration is the maximum duration
- * and the actual measurement duration may be shorter.
- *
- * @NL80211_ATTR_MESH_PEER_AID: Association ID for the mesh peer (u16). This is
- * used to pull the stored data for mesh peer in power save state.
- *
- * @NL80211_ATTR_NAN_MASTER_PREF: the master preference to be used by
- * %NL80211_CMD_START_NAN and optionally with
- * %NL80211_CMD_CHANGE_NAN_CONFIG. Its type is u8 and it can't be 0.
- * Also, values 1 and 255 are reserved for certification purposes and
- * should not be used during a normal device operation.
- * @NL80211_ATTR_BANDS: operating bands configuration. This is a u32
- * bitmask of BIT(NL80211_BAND_*) as described in %enum
- * nl80211_band. For instance, for NL80211_BAND_2GHZ, bit 0
- * would be set. This attribute is used with
- * %NL80211_CMD_START_NAN and %NL80211_CMD_CHANGE_NAN_CONFIG, and
- * it is optional. If no bands are set, it means don't-care and
- * the device will decide what to use.
- * @NL80211_ATTR_NAN_FUNC: a function that can be added to NAN. See
- * &enum nl80211_nan_func_attributes for description of this nested
- * attribute.
- * @NL80211_ATTR_NAN_MATCH: used to report a match. This is a nested attribute.
- * See &enum nl80211_nan_match_attributes.
- * @NL80211_ATTR_FILS_KEK: KEK for FILS (Re)Association Request/Response frame
- * protection.
- * @NL80211_ATTR_FILS_NONCES: Nonces (part of AAD) for FILS (Re)Association
- * Request/Response frame protection. This attribute contains the 16 octet
- * STA Nonce followed by 16 octets of AP Nonce.
- *
- * @NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED: Indicates whether or not multicast
- * packets should be send out as unicast to all stations (flag attribute).
- *
- * @NL80211_ATTR_BSSID: The BSSID of the AP. Note that %NL80211_ATTR_MAC is also
- * used in various commands/events for specifying the BSSID.
- *
- * @NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI: Relative RSSI threshold by which
- * other BSSs has to be better or slightly worse than the current
- * connected BSS so that they get reported to user space.
- * This will give an opportunity to userspace to consider connecting to
- * other matching BSSs which have better or slightly worse RSSI than
- * the current connected BSS by using an offloaded operation to avoid
- * unnecessary wakeups.
- *
- * @NL80211_ATTR_SCHED_SCAN_RSSI_ADJUST: When present the RSSI level for BSSs in
- * the specified band is to be adjusted before doing
- * %NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI based comparison to figure out
- * better BSSs. The attribute value is a packed structure
- * value as specified by &struct nl80211_bss_select_rssi_adjust.
- *
- * @NL80211_ATTR_TIMEOUT_REASON: The reason for which an operation timed out.
- * u32 attribute with an &enum nl80211_timeout_reason value. This is used,
- * e.g., with %NL80211_CMD_CONNECT event.
- *
- * @NL80211_ATTR_FILS_ERP_USERNAME: EAP Re-authentication Protocol (ERP)
- * username part of NAI used to refer keys rRK and rIK. This is used with
- * %NL80211_CMD_CONNECT.
- *
- * @NL80211_ATTR_FILS_ERP_REALM: EAP Re-authentication Protocol (ERP) realm part
- * of NAI specifying the domain name of the ER server. This is used with
- * %NL80211_CMD_CONNECT.
- *
- * @NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM: Unsigned 16-bit ERP next sequence number
- * to use in ERP messages. This is used in generating the FILS wrapped data
- * for FILS authentication and is used with %NL80211_CMD_CONNECT.
- *
- * @NL80211_ATTR_FILS_ERP_RRK: ERP re-authentication Root Key (rRK) for the
- * NAI specified by %NL80211_ATTR_FILS_ERP_USERNAME and
- * %NL80211_ATTR_FILS_ERP_REALM. This is used for generating rIK and rMSK
- * from successful FILS authentication and is used with
- * %NL80211_CMD_CONNECT.
- *
- * @NL80211_ATTR_FILS_CACHE_ID: A 2-octet identifier advertized by a FILS AP
- * identifying the scope of PMKSAs. This is used with
- * @NL80211_CMD_SET_PMKSA and @NL80211_CMD_DEL_PMKSA.
- *
- * @NL80211_ATTR_PMK: attribute for passing PMK key material. Used with
- * %NL80211_CMD_SET_PMKSA for the PMKSA identified by %NL80211_ATTR_PMKID.
- * For %NL80211_CMD_CONNECT and %NL80211_CMD_START_AP it is used to provide
- * PSK for offloading 4-way handshake for WPA/WPA2-PSK networks. For 802.1X
- * authentication it is used with %NL80211_CMD_SET_PMK. For offloaded FT
- * support this attribute specifies the PMK-R0 if NL80211_ATTR_PMKR0_NAME
- * is included as well.
- *
- * @NL80211_ATTR_SCHED_SCAN_MULTI: flag attribute which user-space shall use to
- * indicate that it supports multiple active scheduled scan requests.
- * @NL80211_ATTR_SCHED_SCAN_MAX_REQS: indicates maximum number of scheduled
- * scan request that may be active for the device (u32).
- *
- * @NL80211_ATTR_WANT_1X_4WAY_HS: flag attribute which user-space can include
- * in %NL80211_CMD_CONNECT to indicate that for 802.1X authentication it
- * wants to use the supported offload of the 4-way handshake.
- * @NL80211_ATTR_PMKR0_NAME: PMK-R0 Name for offloaded FT.
- * @NL80211_ATTR_PORT_AUTHORIZED: (reserved)
- *
- * @NL80211_ATTR_EXTERNAL_AUTH_ACTION: Identify the requested external
- * authentication operation (u32 attribute with an
- * &enum nl80211_external_auth_action value). This is used with the
- * %NL80211_CMD_EXTERNAL_AUTH request event.
- * @NL80211_ATTR_EXTERNAL_AUTH_SUPPORT: Flag attribute indicating that the user
- * space supports external authentication. This attribute shall be used
- * with %NL80211_CMD_CONNECT and %NL80211_CMD_START_AP request. The driver
- * may offload authentication processing to user space if this capability
- * is indicated in the respective requests from the user space.
- *
- * @NL80211_ATTR_NSS: Station's New/updated RX_NSS value notified using this
- * u8 attribute. This is used with %NL80211_CMD_STA_OPMODE_CHANGED.
- *
- * @NL80211_ATTR_TXQ_STATS: TXQ statistics (nested attribute, see &enum
- * nl80211_txq_stats)
- * @NL80211_ATTR_TXQ_LIMIT: Total packet limit for the TXQ queues for this phy.
- * The smaller of this and the memory limit is enforced.
- * @NL80211_ATTR_TXQ_MEMORY_LIMIT: Total memory limit (in bytes) for the
- * TXQ queues for this phy. The smaller of this and the packet limit is
- * enforced.
- * @NL80211_ATTR_TXQ_QUANTUM: TXQ scheduler quantum (bytes). Number of bytes
- * a flow is assigned on each round of the DRR scheduler.
- * @NL80211_ATTR_HE_CAPABILITY: HE Capability information element (from
- * association request when used with NL80211_CMD_NEW_STATION). Can be set
- * only if %NL80211_STA_FLAG_WME is set.
- *
- * @NL80211_ATTR_FTM_RESPONDER: nested attribute which user-space can include
- * in %NL80211_CMD_START_AP or %NL80211_CMD_SET_BEACON for fine timing
- * measurement (FTM) responder functionality and containing parameters as
- * possible, see &enum nl80211_ftm_responder_attr
- *
- * @NL80211_ATTR_FTM_RESPONDER_STATS: Nested attribute with FTM responder
- * statistics, see &enum nl80211_ftm_responder_stats.
- *
- * @NL80211_ATTR_TIMEOUT: Timeout for the given operation in milliseconds (u32),
- * if the attribute is not given no timeout is requested. Note that 0 is an
- * invalid value.
- *
- * @NL80211_ATTR_PEER_MEASUREMENTS: peer measurements request (and result)
- * data, uses nested attributes specified in
- * &enum nl80211_peer_measurement_attrs.
- * This is also used for capability advertisement in the wiphy information,
- * with the appropriate sub-attributes.
- *
- * @NL80211_ATTR_AIRTIME_WEIGHT: Station's weight when scheduled by the airtime
- * scheduler.
- *
- * @NL80211_ATTR_STA_TX_POWER_SETTING: Transmit power setting type (u8) for
- * station associated with the AP. See &enum nl80211_tx_power_setting for
- * possible values.
- * @NL80211_ATTR_STA_TX_POWER: Transmit power level (s16) in dBm units. This
- * allows to set Tx power for a station. If this attribute is not included,
- * the default per-interface tx power setting will be overriding. Driver
- * should be picking up the lowest tx power, either tx power per-interface
- * or per-station.
- *
- * @NL80211_ATTR_SAE_PASSWORD: attribute for passing SAE password material. It
- * is used with %NL80211_CMD_CONNECT to provide password for offloading
- * SAE authentication for WPA3-Personal networks.
- *
- * @NL80211_ATTR_TWT_RESPONDER: Enable target wait time responder support.
- *
- * @NL80211_ATTR_HE_OBSS_PD: nested attribute for OBSS Packet Detection
- * functionality.
- *
- * @NL80211_ATTR_WIPHY_EDMG_CHANNELS: bitmap that indicates the 2.16 GHz
- * channel(s) that are allowed to be used for EDMG transmissions.
- * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251. (u8 attribute)
- * @NL80211_ATTR_WIPHY_EDMG_BW_CONFIG: Channel BW Configuration subfield encodes
- * the allowed channel bandwidth configurations. (u8 attribute)
- * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251, Table 13.
- *
- * @NL80211_ATTR_VLAN_ID: VLAN ID (1..4094) for the station and VLAN group key
- * (u16).
- *
- * @NL80211_ATTR_HE_BSS_COLOR: nested attribute for BSS Color Settings.
- *
- * @NL80211_ATTR_IFTYPE_AKM_SUITES: nested array attribute, with each entry
- * using attributes from &enum nl80211_iftype_akm_attributes. This
- * attribute is sent in a response to %NL80211_CMD_GET_WIPHY indicating
- * supported AKM suites capability per interface. AKMs advertised in
- * %NL80211_ATTR_AKM_SUITES are default capabilities if AKM suites not
- * advertised for a specific interface type.
- *
- * @NL80211_ATTR_TID_CONFIG: TID specific configuration in a
- * nested attribute with &enum nl80211_tid_config_attr sub-attributes;
- * on output (in wiphy attributes) it contains only the feature sub-
- * attributes.
- *
- * @NL80211_ATTR_CONTROL_PORT_NO_PREAUTH: disable preauth frame rx on control
- * port in order to forward/receive them as ordinary data frames.
- *
- * @NL80211_ATTR_PMK_LIFETIME: Maximum lifetime for PMKSA in seconds (u32,
- * dot11RSNAConfigPMKReauthThreshold; 0 is not a valid value).
- * An optional parameter configured through %NL80211_CMD_SET_PMKSA.
- * Drivers that trigger roaming need to know the lifetime of the
- * configured PMKSA for triggering the full vs. PMKSA caching based
- * authentication. This timeout helps authentication methods like SAE,
- * where PMK gets updated only by going through a full (new SAE)
- * authentication instead of getting updated during an association for EAP
- * authentication. No new full authentication within the PMK expiry shall
- * result in a disassociation at the end of the lifetime.
- *
- * @NL80211_ATTR_PMK_REAUTH_THRESHOLD: Reauthentication threshold time, in
- * terms of percentage of %NL80211_ATTR_PMK_LIFETIME
- * (u8, dot11RSNAConfigPMKReauthThreshold, 1..100). This is an optional
- * parameter configured through %NL80211_CMD_SET_PMKSA. Requests the
- * driver to trigger a full authentication roam (without PMKSA caching)
- * after the reauthentication threshold time, but before the PMK lifetime
- * has expired.
- *
- * Authentication methods like SAE need to be able to generate a new PMKSA
- * entry without having to force a disconnection after the PMK timeout. If
- * no roaming occurs between the reauth threshold and PMK expiration,
- * disassociation is still forced.
- * @NL80211_ATTR_RECEIVE_MULTICAST: multicast flag for the
- * %NL80211_CMD_REGISTER_FRAME command, see the description there.
- * @NL80211_ATTR_WIPHY_FREQ_OFFSET: offset of the associated
- * %NL80211_ATTR_WIPHY_FREQ in positive KHz. Only valid when supplied with
- * an %NL80211_ATTR_WIPHY_FREQ_OFFSET.
- * @NL80211_ATTR_CENTER_FREQ1_OFFSET: Center frequency offset in KHz for the
- * first channel segment specified in %NL80211_ATTR_CENTER_FREQ1.
- * @NL80211_ATTR_SCAN_FREQ_KHZ: nested attribute with KHz frequencies
- *
- * @NL80211_ATTR_HE_6GHZ_CAPABILITY: HE 6 GHz Band Capability element (from
- * association request when used with NL80211_CMD_NEW_STATION).
- *
- * @NL80211_ATTR_FILS_DISCOVERY: Optional parameter to configure FILS
- * discovery. It is a nested attribute, see
- * &enum nl80211_fils_discovery_attributes.
- *
- * @NL80211_ATTR_UNSOL_BCAST_PROBE_RESP: Optional parameter to configure
- * unsolicited broadcast probe response. It is a nested attribute, see
- * &enum nl80211_unsol_bcast_probe_resp_attributes.
- *
- * @NL80211_ATTR_S1G_CAPABILITY: S1G Capability information element (from
- * association request when used with NL80211_CMD_NEW_STATION)
- * @NL80211_ATTR_S1G_CAPABILITY_MASK: S1G Capability Information element
- * override mask. Used with NL80211_ATTR_S1G_CAPABILITY in
- * NL80211_CMD_ASSOCIATE or NL80211_CMD_CONNECT.
- *
- * @NL80211_ATTR_SAE_PWE: Indicates the mechanism(s) allowed for SAE PWE
- * derivation in WPA3-Personal networks which are using SAE authentication.
- * This is a u8 attribute that encapsulates one of the values from
- * &enum nl80211_sae_pwe_mechanism.
- *
- * @NL80211_ATTR_SAR_SPEC: SAR power limitation specification when
- * used with %NL80211_CMD_SET_SAR_SPECS. The message contains fields
- * of %nl80211_sar_attrs which specifies the sar type and related
- * sar specs. Sar specs contains array of %nl80211_sar_specs_attrs.
- *
- * @NL80211_ATTR_RECONNECT_REQUESTED: flag attribute, used with deauth and
- * disassoc events to indicate that an immediate reconnect to the AP
- * is desired.
- *
- * @NL80211_ATTR_OBSS_COLOR_BITMAP: bitmap of the u64 BSS colors for the
- * %NL80211_CMD_OBSS_COLOR_COLLISION event.
- *
- * @NL80211_ATTR_COLOR_CHANGE_COUNT: u8 attribute specifying the number of TBTT's
- * until the color switch event.
- * @NL80211_ATTR_COLOR_CHANGE_COLOR: u8 attribute specifying the color that we are
- * switching to
- * @NL80211_ATTR_COLOR_CHANGE_ELEMS: Nested set of attributes containing the IE
- * information for the time while performing a color switch.
- *
- * @NUM_NL80211_ATTR: total number of nl80211_attrs available
- * @NL80211_ATTR_MAX: highest attribute number currently defined
- * @__NL80211_ATTR_AFTER_LAST: internal use
- */
- enum nl80211_attrs {
- /* don't change the order or add anything between, this is ABI! */
- NL80211_ATTR_UNSPEC,
- NL80211_ATTR_WIPHY,
- NL80211_ATTR_WIPHY_NAME,
- NL80211_ATTR_IFINDEX,
- NL80211_ATTR_IFNAME,
- NL80211_ATTR_IFTYPE,
- NL80211_ATTR_MAC,
- NL80211_ATTR_KEY_DATA,
- NL80211_ATTR_KEY_IDX,
- NL80211_ATTR_KEY_CIPHER,
- NL80211_ATTR_KEY_SEQ,
- NL80211_ATTR_KEY_DEFAULT,
- NL80211_ATTR_BEACON_INTERVAL,
- NL80211_ATTR_DTIM_PERIOD,
- NL80211_ATTR_BEACON_HEAD,
- NL80211_ATTR_BEACON_TAIL,
- NL80211_ATTR_STA_AID,
- NL80211_ATTR_STA_FLAGS,
- NL80211_ATTR_STA_LISTEN_INTERVAL,
- NL80211_ATTR_STA_SUPPORTED_RATES,
- NL80211_ATTR_STA_VLAN,
- NL80211_ATTR_STA_INFO,
- NL80211_ATTR_WIPHY_BANDS,
- NL80211_ATTR_MNTR_FLAGS,
- NL80211_ATTR_MESH_ID,
- NL80211_ATTR_STA_PLINK_ACTION,
- NL80211_ATTR_MPATH_NEXT_HOP,
- NL80211_ATTR_MPATH_INFO,
- NL80211_ATTR_BSS_CTS_PROT,
- NL80211_ATTR_BSS_SHORT_PREAMBLE,
- NL80211_ATTR_BSS_SHORT_SLOT_TIME,
- NL80211_ATTR_HT_CAPABILITY,
- NL80211_ATTR_SUPPORTED_IFTYPES,
- NL80211_ATTR_REG_ALPHA2,
- NL80211_ATTR_REG_RULES,
- NL80211_ATTR_MESH_CONFIG,
- NL80211_ATTR_BSS_BASIC_RATES,
- NL80211_ATTR_WIPHY_TXQ_PARAMS,
- NL80211_ATTR_WIPHY_FREQ,
- NL80211_ATTR_WIPHY_CHANNEL_TYPE,
- NL80211_ATTR_KEY_DEFAULT_MGMT,
- NL80211_ATTR_MGMT_SUBTYPE,
- NL80211_ATTR_IE,
- NL80211_ATTR_MAX_NUM_SCAN_SSIDS,
- NL80211_ATTR_SCAN_FREQUENCIES,
- NL80211_ATTR_SCAN_SSIDS,
- NL80211_ATTR_GENERATION, /* replaces old SCAN_GENERATION */
- NL80211_ATTR_BSS,
- NL80211_ATTR_REG_INITIATOR,
- NL80211_ATTR_REG_TYPE,
- NL80211_ATTR_SUPPORTED_COMMANDS,
- NL80211_ATTR_FRAME,
- NL80211_ATTR_SSID,
- NL80211_ATTR_AUTH_TYPE,
- NL80211_ATTR_REASON_CODE,
- NL80211_ATTR_KEY_TYPE,
- NL80211_ATTR_MAX_SCAN_IE_LEN,
- NL80211_ATTR_CIPHER_SUITES,
- NL80211_ATTR_FREQ_BEFORE,
- NL80211_ATTR_FREQ_AFTER,
- NL80211_ATTR_FREQ_FIXED,
- NL80211_ATTR_WIPHY_RETRY_SHORT,
- NL80211_ATTR_WIPHY_RETRY_LONG,
- NL80211_ATTR_WIPHY_FRAG_THRESHOLD,
- NL80211_ATTR_WIPHY_RTS_THRESHOLD,
- NL80211_ATTR_TIMED_OUT,
- NL80211_ATTR_USE_MFP,
- NL80211_ATTR_STA_FLAGS2,
- NL80211_ATTR_CONTROL_PORT,
- NL80211_ATTR_TESTDATA,
- NL80211_ATTR_PRIVACY,
- NL80211_ATTR_DISCONNECTED_BY_AP,
- NL80211_ATTR_STATUS_CODE,
- NL80211_ATTR_CIPHER_SUITES_PAIRWISE,
- NL80211_ATTR_CIPHER_SUITE_GROUP,
- NL80211_ATTR_WPA_VERSIONS,
- NL80211_ATTR_AKM_SUITES,
- NL80211_ATTR_REQ_IE,
- NL80211_ATTR_RESP_IE,
- NL80211_ATTR_PREV_BSSID,
- NL80211_ATTR_KEY,
- NL80211_ATTR_KEYS,
- NL80211_ATTR_PID,
- NL80211_ATTR_4ADDR,
- NL80211_ATTR_SURVEY_INFO,
- NL80211_ATTR_PMKID,
- NL80211_ATTR_MAX_NUM_PMKIDS,
- NL80211_ATTR_DURATION,
- NL80211_ATTR_COOKIE,
- NL80211_ATTR_WIPHY_COVERAGE_CLASS,
- NL80211_ATTR_TX_RATES,
- NL80211_ATTR_FRAME_MATCH,
- NL80211_ATTR_ACK,
- NL80211_ATTR_PS_STATE,
- NL80211_ATTR_CQM,
- NL80211_ATTR_LOCAL_STATE_CHANGE,
- NL80211_ATTR_AP_ISOLATE,
- NL80211_ATTR_WIPHY_TX_POWER_SETTING,
- NL80211_ATTR_WIPHY_TX_POWER_LEVEL,
- NL80211_ATTR_TX_FRAME_TYPES,
- NL80211_ATTR_RX_FRAME_TYPES,
- NL80211_ATTR_FRAME_TYPE,
- NL80211_ATTR_CONTROL_PORT_ETHERTYPE,
- NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT,
- NL80211_ATTR_SUPPORT_IBSS_RSN,
- NL80211_ATTR_WIPHY_ANTENNA_TX,
- NL80211_ATTR_WIPHY_ANTENNA_RX,
- NL80211_ATTR_MCAST_RATE,
- NL80211_ATTR_OFFCHANNEL_TX_OK,
- NL80211_ATTR_BSS_HT_OPMODE,
- NL80211_ATTR_KEY_DEFAULT_TYPES,
- NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION,
- NL80211_ATTR_MESH_SETUP,
- NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX,
- NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX,
- NL80211_ATTR_SUPPORT_MESH_AUTH,
- NL80211_ATTR_STA_PLINK_STATE,
- NL80211_ATTR_WOWLAN_TRIGGERS,
- NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED,
- NL80211_ATTR_SCHED_SCAN_INTERVAL,
- NL80211_ATTR_INTERFACE_COMBINATIONS,
- NL80211_ATTR_SOFTWARE_IFTYPES,
- NL80211_ATTR_REKEY_DATA,
- NL80211_ATTR_MAX_NUM_SCHED_SCAN_SSIDS,
- NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN,
- NL80211_ATTR_SCAN_SUPP_RATES,
- NL80211_ATTR_HIDDEN_SSID,
- NL80211_ATTR_IE_PROBE_RESP,
- NL80211_ATTR_IE_ASSOC_RESP,
- NL80211_ATTR_STA_WME,
- NL80211_ATTR_SUPPORT_AP_UAPSD,
- NL80211_ATTR_ROAM_SUPPORT,
- NL80211_ATTR_SCHED_SCAN_MATCH,
- NL80211_ATTR_MAX_MATCH_SETS,
- NL80211_ATTR_PMKSA_CANDIDATE,
- NL80211_ATTR_TX_NO_CCK_RATE,
- NL80211_ATTR_TDLS_ACTION,
- NL80211_ATTR_TDLS_DIALOG_TOKEN,
- NL80211_ATTR_TDLS_OPERATION,
- NL80211_ATTR_TDLS_SUPPORT,
- NL80211_ATTR_TDLS_EXTERNAL_SETUP,
- NL80211_ATTR_DEVICE_AP_SME,
- NL80211_ATTR_DONT_WAIT_FOR_ACK,
- NL80211_ATTR_FEATURE_FLAGS,
- NL80211_ATTR_PROBE_RESP_OFFLOAD,
- NL80211_ATTR_PROBE_RESP,
- NL80211_ATTR_DFS_REGION,
- NL80211_ATTR_DISABLE_HT,
- NL80211_ATTR_HT_CAPABILITY_MASK,
- NL80211_ATTR_NOACK_MAP,
- NL80211_ATTR_INACTIVITY_TIMEOUT,
- NL80211_ATTR_RX_SIGNAL_DBM,
- NL80211_ATTR_BG_SCAN_PERIOD,
- NL80211_ATTR_WDEV,
- NL80211_ATTR_USER_REG_HINT_TYPE,
- NL80211_ATTR_CONN_FAILED_REASON,
- NL80211_ATTR_AUTH_DATA,
- NL80211_ATTR_VHT_CAPABILITY,
- NL80211_ATTR_SCAN_FLAGS,
- NL80211_ATTR_CHANNEL_WIDTH,
- NL80211_ATTR_CENTER_FREQ1,
- NL80211_ATTR_CENTER_FREQ2,
- NL80211_ATTR_P2P_CTWINDOW,
- NL80211_ATTR_P2P_OPPPS,
- NL80211_ATTR_LOCAL_MESH_POWER_MODE,
- NL80211_ATTR_ACL_POLICY,
- NL80211_ATTR_MAC_ADDRS,
- NL80211_ATTR_MAC_ACL_MAX,
- NL80211_ATTR_RADAR_EVENT,
- NL80211_ATTR_EXT_CAPA,
- NL80211_ATTR_EXT_CAPA_MASK,
- NL80211_ATTR_STA_CAPABILITY,
- NL80211_ATTR_STA_EXT_CAPABILITY,
- NL80211_ATTR_PROTOCOL_FEATURES,
- NL80211_ATTR_SPLIT_WIPHY_DUMP,
- NL80211_ATTR_DISABLE_VHT,
- NL80211_ATTR_VHT_CAPABILITY_MASK,
- NL80211_ATTR_MDID,
- NL80211_ATTR_IE_RIC,
- NL80211_ATTR_CRIT_PROT_ID,
- NL80211_ATTR_MAX_CRIT_PROT_DURATION,
- NL80211_ATTR_PEER_AID,
- NL80211_ATTR_COALESCE_RULE,
- NL80211_ATTR_CH_SWITCH_COUNT,
- NL80211_ATTR_CH_SWITCH_BLOCK_TX,
- NL80211_ATTR_CSA_IES,
- NL80211_ATTR_CNTDWN_OFFS_BEACON,
- NL80211_ATTR_CNTDWN_OFFS_PRESP,
- NL80211_ATTR_RXMGMT_FLAGS,
- NL80211_ATTR_STA_SUPPORTED_CHANNELS,
- NL80211_ATTR_STA_SUPPORTED_OPER_CLASSES,
- NL80211_ATTR_HANDLE_DFS,
- NL80211_ATTR_SUPPORT_5_MHZ,
- NL80211_ATTR_SUPPORT_10_MHZ,
- NL80211_ATTR_OPMODE_NOTIF,
- NL80211_ATTR_VENDOR_ID,
- NL80211_ATTR_VENDOR_SUBCMD,
- NL80211_ATTR_VENDOR_DATA,
- NL80211_ATTR_VENDOR_EVENTS,
- NL80211_ATTR_QOS_MAP,
- NL80211_ATTR_MAC_HINT,
- NL80211_ATTR_WIPHY_FREQ_HINT,
- NL80211_ATTR_MAX_AP_ASSOC_STA,
- NL80211_ATTR_TDLS_PEER_CAPABILITY,
- NL80211_ATTR_SOCKET_OWNER,
- NL80211_ATTR_CSA_C_OFFSETS_TX,
- NL80211_ATTR_MAX_CSA_COUNTERS,
- NL80211_ATTR_TDLS_INITIATOR,
- NL80211_ATTR_USE_RRM,
- NL80211_ATTR_WIPHY_DYN_ACK,
- NL80211_ATTR_TSID,
- NL80211_ATTR_USER_PRIO,
- NL80211_ATTR_ADMITTED_TIME,
- NL80211_ATTR_SMPS_MODE,
- NL80211_ATTR_OPER_CLASS,
- NL80211_ATTR_MAC_MASK,
- NL80211_ATTR_WIPHY_SELF_MANAGED_REG,
- NL80211_ATTR_EXT_FEATURES,
- NL80211_ATTR_SURVEY_RADIO_STATS,
- NL80211_ATTR_NETNS_FD,
- NL80211_ATTR_SCHED_SCAN_DELAY,
- NL80211_ATTR_REG_INDOOR,
- NL80211_ATTR_MAX_NUM_SCHED_SCAN_PLANS,
- NL80211_ATTR_MAX_SCAN_PLAN_INTERVAL,
- NL80211_ATTR_MAX_SCAN_PLAN_ITERATIONS,
- NL80211_ATTR_SCHED_SCAN_PLANS,
- NL80211_ATTR_PBSS,
- NL80211_ATTR_BSS_SELECT,
- NL80211_ATTR_STA_SUPPORT_P2P_PS,
- NL80211_ATTR_PAD,
- NL80211_ATTR_IFTYPE_EXT_CAPA,
- NL80211_ATTR_MU_MIMO_GROUP_DATA,
- NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR,
- NL80211_ATTR_SCAN_START_TIME_TSF,
- NL80211_ATTR_SCAN_START_TIME_TSF_BSSID,
- NL80211_ATTR_MEASUREMENT_DURATION,
- NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY,
- NL80211_ATTR_MESH_PEER_AID,
- NL80211_ATTR_NAN_MASTER_PREF,
- NL80211_ATTR_BANDS,
- NL80211_ATTR_NAN_FUNC,
- NL80211_ATTR_NAN_MATCH,
- NL80211_ATTR_FILS_KEK,
- NL80211_ATTR_FILS_NONCES,
- NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED,
- NL80211_ATTR_BSSID,
- NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI,
- NL80211_ATTR_SCHED_SCAN_RSSI_ADJUST,
- NL80211_ATTR_TIMEOUT_REASON,
- NL80211_ATTR_FILS_ERP_USERNAME,
- NL80211_ATTR_FILS_ERP_REALM,
- NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM,
- NL80211_ATTR_FILS_ERP_RRK,
- NL80211_ATTR_FILS_CACHE_ID,
- NL80211_ATTR_PMK,
- NL80211_ATTR_SCHED_SCAN_MULTI,
- NL80211_ATTR_SCHED_SCAN_MAX_REQS,
- NL80211_ATTR_WANT_1X_4WAY_HS,
- NL80211_ATTR_PMKR0_NAME,
- NL80211_ATTR_PORT_AUTHORIZED,
- NL80211_ATTR_EXTERNAL_AUTH_ACTION,
- NL80211_ATTR_EXTERNAL_AUTH_SUPPORT,
- NL80211_ATTR_NSS,
- NL80211_ATTR_ACK_SIGNAL,
- NL80211_ATTR_CONTROL_PORT_OVER_NL80211,
- NL80211_ATTR_TXQ_STATS,
- NL80211_ATTR_TXQ_LIMIT,
- NL80211_ATTR_TXQ_MEMORY_LIMIT,
- NL80211_ATTR_TXQ_QUANTUM,
- NL80211_ATTR_HE_CAPABILITY,
- NL80211_ATTR_FTM_RESPONDER,
- NL80211_ATTR_FTM_RESPONDER_STATS,
- NL80211_ATTR_TIMEOUT,
- NL80211_ATTR_PEER_MEASUREMENTS,
- NL80211_ATTR_AIRTIME_WEIGHT,
- NL80211_ATTR_STA_TX_POWER_SETTING,
- NL80211_ATTR_STA_TX_POWER,
- NL80211_ATTR_SAE_PASSWORD,
- NL80211_ATTR_TWT_RESPONDER,
- NL80211_ATTR_HE_OBSS_PD,
- NL80211_ATTR_WIPHY_EDMG_CHANNELS,
- NL80211_ATTR_WIPHY_EDMG_BW_CONFIG,
- NL80211_ATTR_VLAN_ID,
- NL80211_ATTR_HE_BSS_COLOR,
- NL80211_ATTR_IFTYPE_AKM_SUITES,
- NL80211_ATTR_TID_CONFIG,
- NL80211_ATTR_CONTROL_PORT_NO_PREAUTH,
- NL80211_ATTR_PMK_LIFETIME,
- NL80211_ATTR_PMK_REAUTH_THRESHOLD,
- NL80211_ATTR_RECEIVE_MULTICAST,
- NL80211_ATTR_WIPHY_FREQ_OFFSET,
- NL80211_ATTR_CENTER_FREQ1_OFFSET,
- NL80211_ATTR_SCAN_FREQ_KHZ,
- NL80211_ATTR_HE_6GHZ_CAPABILITY,
- NL80211_ATTR_FILS_DISCOVERY,
- NL80211_ATTR_UNSOL_BCAST_PROBE_RESP,
- NL80211_ATTR_S1G_CAPABILITY,
- NL80211_ATTR_S1G_CAPABILITY_MASK,
- NL80211_ATTR_SAE_PWE,
- NL80211_ATTR_RECONNECT_REQUESTED,
- NL80211_ATTR_SAR_SPEC,
- NL80211_ATTR_DISABLE_HE,
- NL80211_ATTR_OBSS_COLOR_BITMAP,
- NL80211_ATTR_COLOR_CHANGE_COUNT,
- NL80211_ATTR_COLOR_CHANGE_COLOR,
- NL80211_ATTR_COLOR_CHANGE_ELEMS,
- /* add attributes here, update the policy in nl80211.c */
- __NL80211_ATTR_AFTER_LAST,
- NUM_NL80211_ATTR = __NL80211_ATTR_AFTER_LAST,
- NL80211_ATTR_MAX = __NL80211_ATTR_AFTER_LAST - 1
- };
- /* source-level API compatibility */
- #define NL80211_ATTR_SCAN_GENERATION NL80211_ATTR_GENERATION
- #define NL80211_ATTR_MESH_PARAMS NL80211_ATTR_MESH_CONFIG
- #define NL80211_ATTR_IFACE_SOCKET_OWNER NL80211_ATTR_SOCKET_OWNER
- #define NL80211_ATTR_SAE_DATA NL80211_ATTR_AUTH_DATA
- #define NL80211_ATTR_CSA_C_OFF_BEACON NL80211_ATTR_CNTDWN_OFFS_BEACON
- #define NL80211_ATTR_CSA_C_OFF_PRESP NL80211_ATTR_CNTDWN_OFFS_PRESP
- /*
- * Allow user space programs to use #ifdef on new attributes by defining them
- * here
- */
- #define NL80211_CMD_CONNECT NL80211_CMD_CONNECT
- #define NL80211_ATTR_HT_CAPABILITY NL80211_ATTR_HT_CAPABILITY
- #define NL80211_ATTR_BSS_BASIC_RATES NL80211_ATTR_BSS_BASIC_RATES
- #define NL80211_ATTR_WIPHY_TXQ_PARAMS NL80211_ATTR_WIPHY_TXQ_PARAMS
- #define NL80211_ATTR_WIPHY_FREQ NL80211_ATTR_WIPHY_FREQ
- #define NL80211_ATTR_WIPHY_CHANNEL_TYPE NL80211_ATTR_WIPHY_CHANNEL_TYPE
- #define NL80211_ATTR_MGMT_SUBTYPE NL80211_ATTR_MGMT_SUBTYPE
- #define NL80211_ATTR_IE NL80211_ATTR_IE
- #define NL80211_ATTR_REG_INITIATOR NL80211_ATTR_REG_INITIATOR
- #define NL80211_ATTR_REG_TYPE NL80211_ATTR_REG_TYPE
- #define NL80211_ATTR_FRAME NL80211_ATTR_FRAME
- #define NL80211_ATTR_SSID NL80211_ATTR_SSID
- #define NL80211_ATTR_AUTH_TYPE NL80211_ATTR_AUTH_TYPE
- #define NL80211_ATTR_REASON_CODE NL80211_ATTR_REASON_CODE
- #define NL80211_ATTR_CIPHER_SUITES_PAIRWISE NL80211_ATTR_CIPHER_SUITES_PAIRWISE
- #define NL80211_ATTR_CIPHER_SUITE_GROUP NL80211_ATTR_CIPHER_SUITE_GROUP
- #define NL80211_ATTR_WPA_VERSIONS NL80211_ATTR_WPA_VERSIONS
- #define NL80211_ATTR_AKM_SUITES NL80211_ATTR_AKM_SUITES
- #define NL80211_ATTR_KEY NL80211_ATTR_KEY
- #define NL80211_ATTR_KEYS NL80211_ATTR_KEYS
- #define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS
- #define NL80211_WIPHY_NAME_MAXLEN 64
- #define NL80211_MAX_SUPP_RATES 32
- #define NL80211_MAX_SUPP_HT_RATES 77
- #define NL80211_MAX_SUPP_REG_RULES 128
- #define NL80211_TKIP_DATA_OFFSET_ENCR_KEY 0
- #define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 16
- #define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24
- #define NL80211_HT_CAPABILITY_LEN 26
- #define NL80211_VHT_CAPABILITY_LEN 12
- #define NL80211_HE_MIN_CAPABILITY_LEN 16
- #define NL80211_HE_MAX_CAPABILITY_LEN 54
- #define NL80211_MAX_NR_CIPHER_SUITES 5
- #define NL80211_MAX_NR_AKM_SUITES 2
- #define NL80211_MIN_REMAIN_ON_CHANNEL_TIME 10
- /* default RSSI threshold for scan results if none specified. */
- #define NL80211_SCAN_RSSI_THOLD_OFF -300
- #define NL80211_CQM_TXE_MAX_INTVL 1800
- /**
- * enum nl80211_iftype - (virtual) interface types
- *
- * @NL80211_IFTYPE_UNSPECIFIED: unspecified type, driver decides
- * @NL80211_IFTYPE_ADHOC: independent BSS member
- * @NL80211_IFTYPE_STATION: managed BSS member
- * @NL80211_IFTYPE_AP: access point
- * @NL80211_IFTYPE_AP_VLAN: VLAN interface for access points; VLAN interfaces
- * are a bit special in that they must always be tied to a pre-existing
- * AP type interface.
- * @NL80211_IFTYPE_WDS: wireless distribution interface
- * @NL80211_IFTYPE_MONITOR: monitor interface receiving all frames
- * @NL80211_IFTYPE_MESH_POINT: mesh point
- * @NL80211_IFTYPE_P2P_CLIENT: P2P client
- * @NL80211_IFTYPE_P2P_GO: P2P group owner
- * @NL80211_IFTYPE_P2P_DEVICE: P2P device interface type, this is not a netdev
- * and therefore can't be created in the normal ways, use the
- * %NL80211_CMD_START_P2P_DEVICE and %NL80211_CMD_STOP_P2P_DEVICE
- * commands to create and destroy one
- * @NL80211_IF_TYPE_OCB: Outside Context of a BSS
- * This mode corresponds to the MIB variable dot11OCBActivated=true
- * @NL80211_IFTYPE_NAN: NAN device interface type (not a netdev)
- * @NL80211_IFTYPE_MAX: highest interface type number currently defined
- * @NUM_NL80211_IFTYPES: number of defined interface types
- *
- * These values are used with the %NL80211_ATTR_IFTYPE
- * to set the type of an interface.
- *
- */
- enum nl80211_iftype {
- NL80211_IFTYPE_UNSPECIFIED,
- NL80211_IFTYPE_ADHOC,
- NL80211_IFTYPE_STATION,
- NL80211_IFTYPE_AP,
- NL80211_IFTYPE_AP_VLAN,
- NL80211_IFTYPE_WDS,
- NL80211_IFTYPE_MONITOR,
- NL80211_IFTYPE_MESH_POINT,
- NL80211_IFTYPE_P2P_CLIENT,
- NL80211_IFTYPE_P2P_GO,
- NL80211_IFTYPE_P2P_DEVICE,
- NL80211_IFTYPE_OCB,
- NL80211_IFTYPE_NAN,
- /* keep last */
- NUM_NL80211_IFTYPES,
- NL80211_IFTYPE_MAX = NUM_NL80211_IFTYPES - 1
- };
- /**
- * enum nl80211_sta_flags - station flags
- *
- * Station flags. When a station is added to an AP interface, it is
- * assumed to be already associated (and hence authenticated.)
- *
- * @__NL80211_STA_FLAG_INVALID: attribute number 0 is reserved
- * @NL80211_STA_FLAG_AUTHORIZED: station is authorized (802.1X)
- * @NL80211_STA_FLAG_SHORT_PREAMBLE: station is capable of receiving frames
- * with short barker preamble
- * @NL80211_STA_FLAG_WME: station is WME/QoS capable
- * @NL80211_STA_FLAG_MFP: station uses management frame protection
- * @NL80211_STA_FLAG_AUTHENTICATED: station is authenticated
- * @NL80211_STA_FLAG_TDLS_PEER: station is a TDLS peer -- this flag should
- * only be used in managed mode (even in the flags mask). Note that the
- * flag can't be changed, it is only valid while adding a station, and
- * attempts to change it will silently be ignored (rather than rejected
- * as errors.)
- * @NL80211_STA_FLAG_ASSOCIATED: station is associated; used with drivers
- * that support %NL80211_FEATURE_FULL_AP_CLIENT_STATE to transition a
- * previously added station into associated state
- * @NL80211_STA_FLAG_MAX: highest station flag number currently defined
- * @__NL80211_STA_FLAG_AFTER_LAST: internal use
- */
- enum nl80211_sta_flags {
- __NL80211_STA_FLAG_INVALID,
- NL80211_STA_FLAG_AUTHORIZED,
- NL80211_STA_FLAG_SHORT_PREAMBLE,
- NL80211_STA_FLAG_WME,
- NL80211_STA_FLAG_MFP,
- NL80211_STA_FLAG_AUTHENTICATED,
- NL80211_STA_FLAG_TDLS_PEER,
- NL80211_STA_FLAG_ASSOCIATED,
- /* keep last */
- __NL80211_STA_FLAG_AFTER_LAST,
- NL80211_STA_FLAG_MAX = __NL80211_STA_FLAG_AFTER_LAST - 1
- };
- /**
- * enum nl80211_sta_p2p_ps_status - station support of P2P PS
- *
- * @NL80211_P2P_PS_UNSUPPORTED: station doesn't support P2P PS mechanism
- * @@NL80211_P2P_PS_SUPPORTED: station supports P2P PS mechanism
- * @NUM_NL80211_P2P_PS_STATUS: number of values
- */
- enum nl80211_sta_p2p_ps_status {
- NL80211_P2P_PS_UNSUPPORTED = 0,
- NL80211_P2P_PS_SUPPORTED,
- NUM_NL80211_P2P_PS_STATUS,
- };
- #define NL80211_STA_FLAG_MAX_OLD_API NL80211_STA_FLAG_TDLS_PEER
- /**
- * struct nl80211_sta_flag_update - station flags mask/set
- * @mask: mask of station flags to set
- * @set: which values to set them to
- *
- * Both mask and set contain bits as per &enum nl80211_sta_flags.
- */
- struct nl80211_sta_flag_update {
- __u32 mask;
- __u32 set;
- } __attribute__((packed));
- /**
- * enum nl80211_he_gi - HE guard interval
- * @NL80211_RATE_INFO_HE_GI_0_8: 0.8 usec
- * @NL80211_RATE_INFO_HE_GI_1_6: 1.6 usec
- * @NL80211_RATE_INFO_HE_GI_3_2: 3.2 usec
- */
- enum nl80211_he_gi {
- NL80211_RATE_INFO_HE_GI_0_8,
- NL80211_RATE_INFO_HE_GI_1_6,
- NL80211_RATE_INFO_HE_GI_3_2,
- };
- /**
- * enum nl80211_he_ltf - HE long training field
- * @NL80211_RATE_INFO_HE_1xLTF: 3.2 usec
- * @NL80211_RATE_INFO_HE_2xLTF: 6.4 usec
- * @NL80211_RATE_INFO_HE_4xLTF: 12.8 usec
- */
- enum nl80211_he_ltf {
- NL80211_RATE_INFO_HE_1XLTF,
- NL80211_RATE_INFO_HE_2XLTF,
- NL80211_RATE_INFO_HE_4XLTF,
- };
- /**
- * enum nl80211_he_ru_alloc - HE RU allocation values
- * @NL80211_RATE_INFO_HE_RU_ALLOC_26: 26-tone RU allocation
- * @NL80211_RATE_INFO_HE_RU_ALLOC_52: 52-tone RU allocation
- * @NL80211_RATE_INFO_HE_RU_ALLOC_106: 106-tone RU allocation
- * @NL80211_RATE_INFO_HE_RU_ALLOC_242: 242-tone RU allocation
- * @NL80211_RATE_INFO_HE_RU_ALLOC_484: 484-tone RU allocation
- * @NL80211_RATE_INFO_HE_RU_ALLOC_996: 996-tone RU allocation
- * @NL80211_RATE_INFO_HE_RU_ALLOC_2x996: 2x996-tone RU allocation
- */
- enum nl80211_he_ru_alloc {
- NL80211_RATE_INFO_HE_RU_ALLOC_26,
- NL80211_RATE_INFO_HE_RU_ALLOC_52,
- NL80211_RATE_INFO_HE_RU_ALLOC_106,
- NL80211_RATE_INFO_HE_RU_ALLOC_242,
- NL80211_RATE_INFO_HE_RU_ALLOC_484,
- NL80211_RATE_INFO_HE_RU_ALLOC_996,
- NL80211_RATE_INFO_HE_RU_ALLOC_2x996,
- };
- /**
- * enum nl80211_rate_info - bitrate information
- *
- * These attribute types are used with %NL80211_STA_INFO_TXRATE
- * when getting information about the bitrate of a station.
- * There are 2 attributes for bitrate, a legacy one that represents
- * a 16-bit value, and new one that represents a 32-bit value.
- * If the rate value fits into 16 bit, both attributes are reported
- * with the same value. If the rate is too high to fit into 16 bits
- * (>6.5535Gbps) only 32-bit attribute is included.
- * User space tools encouraged to use the 32-bit attribute and fall
- * back to the 16-bit one for compatibility with older kernels.
- *
- * @__NL80211_RATE_INFO_INVALID: attribute number 0 is reserved
- * @NL80211_RATE_INFO_BITRATE: total bitrate (u16, 100kbit/s)
- * @NL80211_RATE_INFO_MCS: mcs index for 802.11n (u8)
- * @NL80211_RATE_INFO_40_MHZ_WIDTH: 40 MHz dualchannel bitrate
- * @NL80211_RATE_INFO_SHORT_GI: 400ns guard interval
- * @NL80211_RATE_INFO_BITRATE32: total bitrate (u32, 100kbit/s)
- * @NL80211_RATE_INFO_MAX: highest rate_info number currently defined
- * @NL80211_RATE_INFO_VHT_MCS: MCS index for VHT (u8)
- * @NL80211_RATE_INFO_VHT_NSS: number of streams in VHT (u8)
- * @NL80211_RATE_INFO_80_MHZ_WIDTH: 80 MHz VHT rate
- * @NL80211_RATE_INFO_80P80_MHZ_WIDTH: unused - 80+80 is treated the
- * same as 160 for purposes of the bitrates
- * @NL80211_RATE_INFO_160_MHZ_WIDTH: 160 MHz VHT rate
- * @NL80211_RATE_INFO_10_MHZ_WIDTH: 10 MHz width - note that this is
- * a legacy rate and will be reported as the actual bitrate, i.e.
- * half the base (20 MHz) rate
- * @NL80211_RATE_INFO_5_MHZ_WIDTH: 5 MHz width - note that this is
- * a legacy rate and will be reported as the actual bitrate, i.e.
- * a quarter of the base (20 MHz) rate
- * @NL80211_RATE_INFO_HE_MCS: HE MCS index (u8, 0-11)
- * @NL80211_RATE_INFO_HE_NSS: HE NSS value (u8, 1-8)
- * @NL80211_RATE_INFO_HE_GI: HE guard interval identifier
- * (u8, see &enum nl80211_he_gi)
- * @NL80211_RATE_INFO_HE_DCM: HE DCM value (u8, 0/1)
- * @NL80211_RATE_INFO_RU_ALLOC: HE RU allocation, if not present then
- * non-OFDMA was used (u8, see &enum nl80211_he_ru_alloc)
- * @__NL80211_RATE_INFO_AFTER_LAST: internal use
- */
- enum nl80211_rate_info {
- __NL80211_RATE_INFO_INVALID,
- NL80211_RATE_INFO_BITRATE,
- NL80211_RATE_INFO_MCS,
- NL80211_RATE_INFO_40_MHZ_WIDTH,
- NL80211_RATE_INFO_SHORT_GI,
- NL80211_RATE_INFO_BITRATE32,
- NL80211_RATE_INFO_VHT_MCS,
- NL80211_RATE_INFO_VHT_NSS,
- NL80211_RATE_INFO_80_MHZ_WIDTH,
- NL80211_RATE_INFO_80P80_MHZ_WIDTH,
- NL80211_RATE_INFO_160_MHZ_WIDTH,
- NL80211_RATE_INFO_10_MHZ_WIDTH,
- NL80211_RATE_INFO_5_MHZ_WIDTH,
- NL80211_RATE_INFO_HE_MCS,
- NL80211_RATE_INFO_HE_NSS,
- NL80211_RATE_INFO_HE_GI,
- NL80211_RATE_INFO_HE_DCM,
- NL80211_RATE_INFO_HE_RU_ALLOC,
- /* keep last */
- __NL80211_RATE_INFO_AFTER_LAST,
- NL80211_RATE_INFO_MAX = __NL80211_RATE_INFO_AFTER_LAST - 1
- };
- /**
- * enum nl80211_sta_bss_param - BSS information collected by STA
- *
- * These attribute types are used with %NL80211_STA_INFO_BSS_PARAM
- * when getting information about the bitrate of a station.
- *
- * @__NL80211_STA_BSS_PARAM_INVALID: attribute number 0 is reserved
- * @NL80211_STA_BSS_PARAM_CTS_PROT: whether CTS protection is enabled (flag)
- * @NL80211_STA_BSS_PARAM_SHORT_PREAMBLE: whether short preamble is enabled
- * (flag)
- * @NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME: whether short slot time is enabled
- * (flag)
- * @NL80211_STA_BSS_PARAM_DTIM_PERIOD: DTIM period for beaconing (u8)
- * @NL80211_STA_BSS_PARAM_BEACON_INTERVAL: Beacon interval (u16)
- * @NL80211_STA_BSS_PARAM_MAX: highest sta_bss_param number currently defined
- * @__NL80211_STA_BSS_PARAM_AFTER_LAST: internal use
- */
- enum nl80211_sta_bss_param {
- __NL80211_STA_BSS_PARAM_INVALID,
- NL80211_STA_BSS_PARAM_CTS_PROT,
- NL80211_STA_BSS_PARAM_SHORT_PREAMBLE,
- NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME,
- NL80211_STA_BSS_PARAM_DTIM_PERIOD,
- NL80211_STA_BSS_PARAM_BEACON_INTERVAL,
- /* keep last */
- __NL80211_STA_BSS_PARAM_AFTER_LAST,
- NL80211_STA_BSS_PARAM_MAX = __NL80211_STA_BSS_PARAM_AFTER_LAST - 1
- };
- /**
- * enum nl80211_sta_info - station information
- *
- * These attribute types are used with %NL80211_ATTR_STA_INFO
- * when getting information about a station.
- *
- * @__NL80211_STA_INFO_INVALID: attribute number 0 is reserved
- * @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs)
- * @NL80211_STA_INFO_RX_BYTES: total received bytes (MPDU length)
- * (u32, from this station)
- * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (MPDU length)
- * (u32, to this station)
- * @NL80211_STA_INFO_RX_BYTES64: total received bytes (MPDU length)
- * (u64, from this station)
- * @NL80211_STA_INFO_TX_BYTES64: total transmitted bytes (MPDU length)
- * (u64, to this station)
- * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm)
- * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute
- * containing info as possible, see &enum nl80211_rate_info
- * @NL80211_STA_INFO_RX_PACKETS: total received packet (MSDUs and MMPDUs)
- * (u32, from this station)
- * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (MSDUs and MMPDUs)
- * (u32, to this station)
- * @NL80211_STA_INFO_TX_RETRIES: total retries (MPDUs) (u32, to this station)
- * @NL80211_STA_INFO_TX_FAILED: total failed packets (MPDUs)
- * (u32, to this station)
- * @NL80211_STA_INFO_SIGNAL_AVG: signal strength average (u8, dBm)
- * @NL80211_STA_INFO_LLID: the station's mesh LLID
- * @NL80211_STA_INFO_PLID: the station's mesh PLID
- * @NL80211_STA_INFO_PLINK_STATE: peer link state for the station
- * (see %enum nl80211_plink_state)
- * @NL80211_STA_INFO_RX_BITRATE: last unicast data frame rx rate, nested
- * attribute, like NL80211_STA_INFO_TX_BITRATE.
- * @NL80211_STA_INFO_BSS_PARAM: current station's view of BSS, nested attribute
- * containing info as possible, see &enum nl80211_sta_bss_param
- * @NL80211_STA_INFO_CONNECTED_TIME: time since the station is last connected
- * @NL80211_STA_INFO_STA_FLAGS: Contains a struct nl80211_sta_flag_update.
- * @NL80211_STA_INFO_BEACON_LOSS: count of times beacon loss was detected (u32)
- * @NL80211_STA_INFO_T_OFFSET: timing offset with respect to this STA (s64)
- * @NL80211_STA_INFO_LOCAL_PM: local mesh STA link-specific power mode
- * @NL80211_STA_INFO_PEER_PM: peer mesh STA link-specific power mode
- * @NL80211_STA_INFO_NONPEER_PM: neighbor mesh STA power save mode towards
- * non-peer STA
- * @NL80211_STA_INFO_CHAIN_SIGNAL: per-chain signal strength of last PPDU
- * Contains a nested array of signal strength attributes (u8, dBm)
- * @NL80211_STA_INFO_CHAIN_SIGNAL_AVG: per-chain signal strength average
- * Same format as NL80211_STA_INFO_CHAIN_SIGNAL.
- * @NL80211_STA_EXPECTED_THROUGHPUT: expected throughput considering also the
- * 802.11 header (u32, kbps)
- * @NL80211_STA_INFO_RX_DROP_MISC: RX packets dropped for unspecified reasons
- * (u64)
- * @NL80211_STA_INFO_BEACON_RX: number of beacons received from this peer (u64)
- * @NL80211_STA_INFO_BEACON_SIGNAL_AVG: signal strength average
- * for beacons only (u8, dBm)
- * @NL80211_STA_INFO_TID_STATS: per-TID statistics (see &enum nl80211_tid_stats)
- * This is a nested attribute where each the inner attribute number is the
- * TID+1 and the special TID 16 (i.e. value 17) is used for non-QoS frames;
- * each one of those is again nested with &enum nl80211_tid_stats
- * attributes carrying the actual values.
- * @NL80211_STA_INFO_RX_DURATION: aggregate PPDU duration for all frames
- * received from the station (u64, usec)
- * @NL80211_STA_INFO_PAD: attribute used for padding for 64-bit alignment
- * @NL80211_STA_INFO_ACK_SIGNAL: signal strength of the last ACK frame(u8, dBm)
- * @NL80211_STA_INFO_ACK_SIGNAL_AVG: avg signal strength of ACK frames (s8, dBm)
- * @NL80211_STA_INFO_RX_MPDUS: total number of received packets (MPDUs)
- * (u32, from this station)
- * @NL80211_STA_INFO_FCS_ERROR_COUNT: total number of packets (MPDUs) received
- * with an FCS error (u32, from this station). This count may not include
- * some packets with an FCS error due to TA corruption. Hence this counter
- * might not be fully accurate.
- * @NL80211_STA_INFO_CONNECTED_TO_GATE: set to true if STA has a path to a
- * mesh gate (u8, 0 or 1)
- * @NL80211_STA_INFO_TX_DURATION: aggregate PPDU duration for all frames
- * sent to the station (u64, usec)
- * @NL80211_STA_INFO_AIRTIME_WEIGHT: current airtime weight for station (u16)
- * @NL80211_STA_INFO_AIRTIME_LINK_METRIC: airtime link metric for mesh station
- * @NL80211_STA_INFO_ASSOC_AT_BOOTTIME: Timestamp (CLOCK_BOOTTIME, nanoseconds)
- * of STA's association
- * @NL80211_STA_INFO_CONNECTED_TO_AS: set to true if STA has a path to a
- * authentication server (u8, 0 or 1)
- * @__NL80211_STA_INFO_AFTER_LAST: internal
- * @NL80211_STA_INFO_MAX: highest possible station info attribute
- */
- enum nl80211_sta_info {
- __NL80211_STA_INFO_INVALID,
- NL80211_STA_INFO_INACTIVE_TIME,
- NL80211_STA_INFO_RX_BYTES,
- NL80211_STA_INFO_TX_BYTES,
- NL80211_STA_INFO_LLID,
- NL80211_STA_INFO_PLID,
- NL80211_STA_INFO_PLINK_STATE,
- NL80211_STA_INFO_SIGNAL,
- NL80211_STA_INFO_TX_BITRATE,
- NL80211_STA_INFO_RX_PACKETS,
- NL80211_STA_INFO_TX_PACKETS,
- NL80211_STA_INFO_TX_RETRIES,
- NL80211_STA_INFO_TX_FAILED,
- NL80211_STA_INFO_SIGNAL_AVG,
- NL80211_STA_INFO_RX_BITRATE,
- NL80211_STA_INFO_BSS_PARAM,
- NL80211_STA_INFO_CONNECTED_TIME,
- NL80211_STA_INFO_STA_FLAGS,
- NL80211_STA_INFO_BEACON_LOSS,
- NL80211_STA_INFO_T_OFFSET,
- NL80211_STA_INFO_LOCAL_PM,
- NL80211_STA_INFO_PEER_PM,
- NL80211_STA_INFO_NONPEER_PM,
- NL80211_STA_INFO_RX_BYTES64,
- NL80211_STA_INFO_TX_BYTES64,
- NL80211_STA_INFO_CHAIN_SIGNAL,
- NL80211_STA_INFO_CHAIN_SIGNAL_AVG,
- NL80211_STA_INFO_EXPECTED_THROUGHPUT,
- NL80211_STA_INFO_RX_DROP_MISC,
- NL80211_STA_INFO_BEACON_RX,
- NL80211_STA_INFO_BEACON_SIGNAL_AVG,
- NL80211_STA_INFO_TID_STATS,
- NL80211_STA_INFO_RX_DURATION,
- NL80211_STA_INFO_PAD,
- NL80211_STA_INFO_ACK_SIGNAL,
- NL80211_STA_INFO_ACK_SIGNAL_AVG,
- NL80211_STA_INFO_RX_MPDUS,
- NL80211_STA_INFO_FCS_ERROR_COUNT,
- NL80211_STA_INFO_CONNECTED_TO_GATE,
- NL80211_STA_INFO_TX_DURATION,
- NL80211_STA_INFO_AIRTIME_WEIGHT,
- NL80211_STA_INFO_AIRTIME_LINK_METRIC,
- NL80211_STA_INFO_ASSOC_AT_BOOTTIME,
- NL80211_STA_INFO_CONNECTED_TO_AS,
- /* keep last */
- __NL80211_STA_INFO_AFTER_LAST,
- NL80211_STA_INFO_MAX = __NL80211_STA_INFO_AFTER_LAST - 1
- };
- /* we renamed this - stay compatible */
- #define NL80211_STA_INFO_DATA_ACK_SIGNAL_AVG NL80211_STA_INFO_ACK_SIGNAL_AVG
- /**
- * enum nl80211_tid_stats - per TID statistics attributes
- * @__NL80211_TID_STATS_INVALID: attribute number 0 is reserved
- * @NL80211_TID_STATS_RX_MSDU: number of MSDUs received (u64)
- * @NL80211_TID_STATS_TX_MSDU: number of MSDUs transmitted (or
- * attempted to transmit; u64)
- * @NL80211_TID_STATS_TX_MSDU_RETRIES: number of retries for
- * transmitted MSDUs (not counting the first attempt; u64)
- * @NL80211_TID_STATS_TX_MSDU_FAILED: number of failed transmitted
- * MSDUs (u64)
- * @NL80211_TID_STATS_PAD: attribute used for padding for 64-bit alignment
- * @NL80211_TID_STATS_TXQ_STATS: TXQ stats (nested attribute)
- * @NUM_NL80211_TID_STATS: number of attributes here
- * @NL80211_TID_STATS_MAX: highest numbered attribute here
- */
- enum nl80211_tid_stats {
- __NL80211_TID_STATS_INVALID,
- NL80211_TID_STATS_RX_MSDU,
- NL80211_TID_STATS_TX_MSDU,
- NL80211_TID_STATS_TX_MSDU_RETRIES,
- NL80211_TID_STATS_TX_MSDU_FAILED,
- NL80211_TID_STATS_PAD,
- NL80211_TID_STATS_TXQ_STATS,
- /* keep last */
- NUM_NL80211_TID_STATS,
- NL80211_TID_STATS_MAX = NUM_NL80211_TID_STATS - 1
- };
- /**
- * enum nl80211_txq_stats - per TXQ statistics attributes
- * @__NL80211_TXQ_STATS_INVALID: attribute number 0 is reserved
- * @NUM_NL80211_TXQ_STATS: number of attributes here
- * @NL80211_TXQ_STATS_BACKLOG_BYTES: number of bytes currently backlogged
- * @NL80211_TXQ_STATS_BACKLOG_PACKETS: number of packets currently
- * backlogged
- * @NL80211_TXQ_STATS_FLOWS: total number of new flows seen
- * @NL80211_TXQ_STATS_DROPS: total number of packet drops
- * @NL80211_TXQ_STATS_ECN_MARKS: total number of packet ECN marks
- * @NL80211_TXQ_STATS_OVERLIMIT: number of drops due to queue space overflow
- * @NL80211_TXQ_STATS_OVERMEMORY: number of drops due to memory limit overflow
- * (only for per-phy stats)
- * @NL80211_TXQ_STATS_COLLISIONS: number of hash collisions
- * @NL80211_TXQ_STATS_TX_BYTES: total number of bytes dequeued from TXQ
- * @NL80211_TXQ_STATS_TX_PACKETS: total number of packets dequeued from TXQ
- * @NL80211_TXQ_STATS_MAX_FLOWS: number of flow buckets for PHY
- * @NL80211_TXQ_STATS_MAX: highest numbered attribute here
- */
- enum nl80211_txq_stats {
- __NL80211_TXQ_STATS_INVALID,
- NL80211_TXQ_STATS_BACKLOG_BYTES,
- NL80211_TXQ_STATS_BACKLOG_PACKETS,
- NL80211_TXQ_STATS_FLOWS,
- NL80211_TXQ_STATS_DROPS,
- NL80211_TXQ_STATS_ECN_MARKS,
- NL80211_TXQ_STATS_OVERLIMIT,
- NL80211_TXQ_STATS_OVERMEMORY,
- NL80211_TXQ_STATS_COLLISIONS,
- NL80211_TXQ_STATS_TX_BYTES,
- NL80211_TXQ_STATS_TX_PACKETS,
- NL80211_TXQ_STATS_MAX_FLOWS,
- /* keep last */
- NUM_NL80211_TXQ_STATS,
- NL80211_TXQ_STATS_MAX = NUM_NL80211_TXQ_STATS - 1
- };
- /**
- * enum nl80211_mpath_flags - nl80211 mesh path flags
- *
- * @NL80211_MPATH_FLAG_ACTIVE: the mesh path is active
- * @NL80211_MPATH_FLAG_RESOLVING: the mesh path discovery process is running
- * @NL80211_MPATH_FLAG_SN_VALID: the mesh path contains a valid SN
- * @NL80211_MPATH_FLAG_FIXED: the mesh path has been manually set
- * @NL80211_MPATH_FLAG_RESOLVED: the mesh path discovery process succeeded
- */
- enum nl80211_mpath_flags {
- NL80211_MPATH_FLAG_ACTIVE = 1<<0,
- NL80211_MPATH_FLAG_RESOLVING = 1<<1,
- NL80211_MPATH_FLAG_SN_VALID = 1<<2,
- NL80211_MPATH_FLAG_FIXED = 1<<3,
- NL80211_MPATH_FLAG_RESOLVED = 1<<4,
- };
- /**
- * enum nl80211_mpath_info - mesh path information
- *
- * These attribute types are used with %NL80211_ATTR_MPATH_INFO when getting
- * information about a mesh path.
- *
- * @__NL80211_MPATH_INFO_INVALID: attribute number 0 is reserved
- * @NL80211_MPATH_INFO_FRAME_QLEN: number of queued frames for this destination
- * @NL80211_MPATH_INFO_SN: destination sequence number
- * @NL80211_MPATH_INFO_METRIC: metric (cost) of this mesh path
- * @NL80211_MPATH_INFO_EXPTIME: expiration time for the path, in msec from now
- * @NL80211_MPATH_INFO_FLAGS: mesh path flags, enumerated in
- * &enum nl80211_mpath_flags;
- * @NL80211_MPATH_INFO_DISCOVERY_TIMEOUT: total path discovery timeout, in msec
- * @NL80211_MPATH_INFO_DISCOVERY_RETRIES: mesh path discovery retries
- * @NL80211_MPATH_INFO_HOP_COUNT: hop count to destination
- * @NL80211_MPATH_INFO_PATH_CHANGE: total number of path changes to destination
- * @NL80211_MPATH_INFO_MAX: highest mesh path information attribute number
- * currently defined
- * @__NL80211_MPATH_INFO_AFTER_LAST: internal use
- */
- enum nl80211_mpath_info {
- __NL80211_MPATH_INFO_INVALID,
- NL80211_MPATH_INFO_FRAME_QLEN,
- NL80211_MPATH_INFO_SN,
- NL80211_MPATH_INFO_METRIC,
- NL80211_MPATH_INFO_EXPTIME,
- NL80211_MPATH_INFO_FLAGS,
- NL80211_MPATH_INFO_DISCOVERY_TIMEOUT,
- NL80211_MPATH_INFO_DISCOVERY_RETRIES,
- NL80211_MPATH_INFO_HOP_COUNT,
- NL80211_MPATH_INFO_PATH_CHANGE,
- /* keep last */
- __NL80211_MPATH_INFO_AFTER_LAST,
- NL80211_MPATH_INFO_MAX = __NL80211_MPATH_INFO_AFTER_LAST - 1
- };
- /**
- * enum nl80211_band_iftype_attr - Interface type data attributes
- *
- * @__NL80211_BAND_IFTYPE_ATTR_INVALID: attribute number 0 is reserved
- * @NL80211_BAND_IFTYPE_ATTR_IFTYPES: nested attribute containing a flag attribute
- * for each interface type that supports the band data
- * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_MAC: HE MAC capabilities as in HE
- * capabilities IE
- * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_PHY: HE PHY capabilities as in HE
- * capabilities IE
- * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_MCS_SET: HE supported NSS/MCS as in HE
- * capabilities IE
- * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE: HE PPE thresholds information as
- * defined in HE capabilities IE
- * @NL80211_BAND_IFTYPE_ATTR_MAX: highest band HE capability attribute currently
- * defined
- * @NL80211_BAND_IFTYPE_ATTR_HE_6GHZ_CAPA: HE 6GHz band capabilities (__le16),
- * given for all 6 GHz band channels
- * @NL80211_BAND_IFTYPE_ATTR_VENDOR_ELEMS: vendor element capabilities that are
- * advertised on this band/for this iftype (binary)
- * @__NL80211_BAND_IFTYPE_ATTR_AFTER_LAST: internal use
- */
- enum nl80211_band_iftype_attr {
- __NL80211_BAND_IFTYPE_ATTR_INVALID,
- NL80211_BAND_IFTYPE_ATTR_IFTYPES,
- NL80211_BAND_IFTYPE_ATTR_HE_CAP_MAC,
- NL80211_BAND_IFTYPE_ATTR_HE_CAP_PHY,
- NL80211_BAND_IFTYPE_ATTR_HE_CAP_MCS_SET,
- NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE,
- NL80211_BAND_IFTYPE_ATTR_HE_6GHZ_CAPA,
- NL80211_BAND_IFTYPE_ATTR_VENDOR_ELEMS,
- /* keep last */
- __NL80211_BAND_IFTYPE_ATTR_AFTER_LAST,
- NL80211_BAND_IFTYPE_ATTR_MAX = __NL80211_BAND_IFTYPE_ATTR_AFTER_LAST - 1
- };
- /**
- * enum nl80211_band_attr - band attributes
- * @__NL80211_BAND_ATTR_INVALID: attribute number 0 is reserved
- * @NL80211_BAND_ATTR_FREQS: supported frequencies in this band,
- * an array of nested frequency attributes
- * @NL80211_BAND_ATTR_RATES: supported bitrates in this band,
- * an array of nested bitrate attributes
- * @NL80211_BAND_ATTR_HT_MCS_SET: 16-byte attribute containing the MCS set as
- * defined in 802.11n
- * @NL80211_BAND_ATTR_HT_CAPA: HT capabilities, as in the HT information IE
- * @NL80211_BAND_ATTR_HT_AMPDU_FACTOR: A-MPDU factor, as in 11n
- * @NL80211_BAND_ATTR_HT_AMPDU_DENSITY: A-MPDU density, as in 11n
- * @NL80211_BAND_ATTR_VHT_MCS_SET: 32-byte attribute containing the MCS set as
- * defined in 802.11ac
- * @NL80211_BAND_ATTR_VHT_CAPA: VHT capabilities, as in the HT information IE
- * @NL80211_BAND_ATTR_IFTYPE_DATA: nested array attribute, with each entry using
- * attributes from &enum nl80211_band_iftype_attr
- * @NL80211_BAND_ATTR_EDMG_CHANNELS: bitmap that indicates the 2.16 GHz
- * channel(s) that are allowed to be used for EDMG transmissions.
- * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251.
- * @NL80211_BAND_ATTR_EDMG_BW_CONFIG: Channel BW Configuration subfield encodes
- * the allowed channel bandwidth configurations.
- * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251, Table 13.
- * @NL80211_BAND_ATTR_MAX: highest band attribute currently defined
- * @__NL80211_BAND_ATTR_AFTER_LAST: internal use
- */
- enum nl80211_band_attr {
- __NL80211_BAND_ATTR_INVALID,
- NL80211_BAND_ATTR_FREQS,
- NL80211_BAND_ATTR_RATES,
- NL80211_BAND_ATTR_HT_MCS_SET,
- NL80211_BAND_ATTR_HT_CAPA,
- NL80211_BAND_ATTR_HT_AMPDU_FACTOR,
- NL80211_BAND_ATTR_HT_AMPDU_DENSITY,
- NL80211_BAND_ATTR_VHT_MCS_SET,
- NL80211_BAND_ATTR_VHT_CAPA,
- NL80211_BAND_ATTR_IFTYPE_DATA,
- NL80211_BAND_ATTR_EDMG_CHANNELS,
- NL80211_BAND_ATTR_EDMG_BW_CONFIG,
- /* keep last */
- __NL80211_BAND_ATTR_AFTER_LAST,
- NL80211_BAND_ATTR_MAX = __NL80211_BAND_ATTR_AFTER_LAST - 1
- };
- #define NL80211_BAND_ATTR_HT_CAPA NL80211_BAND_ATTR_HT_CAPA
- /**
- * enum nl80211_wmm_rule - regulatory wmm rule
- *
- * @__NL80211_WMMR_INVALID: attribute number 0 is reserved
- * @NL80211_WMMR_CW_MIN: Minimum contention window slot.
- * @NL80211_WMMR_CW_MAX: Maximum contention window slot.
- * @NL80211_WMMR_AIFSN: Arbitration Inter Frame Space.
- * @NL80211_WMMR_TXOP: Maximum allowed tx operation time.
- * @nl80211_WMMR_MAX: highest possible wmm rule.
- * @__NL80211_WMMR_LAST: Internal use.
- */
- enum nl80211_wmm_rule {
- __NL80211_WMMR_INVALID,
- NL80211_WMMR_CW_MIN,
- NL80211_WMMR_CW_MAX,
- NL80211_WMMR_AIFSN,
- NL80211_WMMR_TXOP,
- /* keep last */
- __NL80211_WMMR_LAST,
- NL80211_WMMR_MAX = __NL80211_WMMR_LAST - 1
- };
- /**
- * enum nl80211_frequency_attr - frequency attributes
- * @__NL80211_FREQUENCY_ATTR_INVALID: attribute number 0 is reserved
- * @NL80211_FREQUENCY_ATTR_FREQ: Frequency in MHz
- * @NL80211_FREQUENCY_ATTR_DISABLED: Channel is disabled in current
- * regulatory domain.
- * @NL80211_FREQUENCY_ATTR_NO_IR: no mechanisms that initiate radiation
- * are permitted on this channel, this includes sending probe
- * requests, or modes of operation that require beaconing.
- * @NL80211_FREQUENCY_ATTR_RADAR: Radar detection is mandatory
- * on this channel in current regulatory domain.
- * @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm
- * (100 * dBm).
- * @NL80211_FREQUENCY_ATTR_DFS_STATE: current state for DFS
- * (enum nl80211_dfs_state)
- * @NL80211_FREQUENCY_ATTR_DFS_TIME: time in miliseconds for how long
- * this channel is in this DFS state.
- * @NL80211_FREQUENCY_ATTR_NO_HT40_MINUS: HT40- isn't possible with this
- * channel as the control channel
- * @NL80211_FREQUENCY_ATTR_NO_HT40_PLUS: HT40+ isn't possible with this
- * channel as the control channel
- * @NL80211_FREQUENCY_ATTR_NO_80MHZ: any 80 MHz channel using this channel
- * as the primary or any of the secondary channels isn't possible,
- * this includes 80+80 channels
- * @NL80211_FREQUENCY_ATTR_NO_160MHZ: any 160 MHz (but not 80+80) channel
- * using this channel as the primary or any of the secondary channels
- * isn't possible
- * @NL80211_FREQUENCY_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds.
- * @NL80211_FREQUENCY_ATTR_INDOOR_ONLY: Only indoor use is permitted on this
- * channel. A channel that has the INDOOR_ONLY attribute can only be
- * used when there is a clear assessment that the device is operating in
- * an indoor surroundings, i.e., it is connected to AC power (and not
- * through portable DC inverters) or is under the control of a master
- * that is acting as an AP and is connected to AC power.
- * @NL80211_FREQUENCY_ATTR_IR_CONCURRENT: IR operation is allowed on this
- * channel if it's connected concurrently to a BSS on the same channel on
- * the 2 GHz band or to a channel in the same UNII band (on the 5 GHz
- * band), and IEEE80211_CHAN_RADAR is not set. Instantiating a GO or TDLS
- * off-channel on a channel that has the IR_CONCURRENT attribute set can be
- * done when there is a clear assessment that the device is operating under
- * the guidance of an authorized master, i.e., setting up a GO or TDLS
- * off-channel while the device is also connected to an AP with DFS and
- * radar detection on the UNII band (it is up to user-space, i.e.,
- * wpa_supplicant to perform the required verifications). Using this
- * attribute for IR is disallowed for master interfaces (IBSS, AP).
- * @NL80211_FREQUENCY_ATTR_NO_20MHZ: 20 MHz operation is not allowed
- * on this channel in current regulatory domain.
- * @NL80211_FREQUENCY_ATTR_NO_10MHZ: 10 MHz operation is not allowed
- * on this channel in current regulatory domain.
- * @NL80211_FREQUENCY_ATTR_WMM: this channel has wmm limitations.
- * This is a nested attribute that contains the wmm limitation per AC.
- * (see &enum nl80211_wmm_rule)
- * @NL80211_FREQUENCY_ATTR_NO_HE: HE operation is not allowed on this channel
- * in current regulatory domain.
- * @NL80211_FREQUENCY_ATTR_OFFSET: frequency offset in KHz
- * @NL80211_FREQUENCY_ATTR_1MHZ: 1 MHz operation is allowed
- * on this channel in current regulatory domain.
- * @NL80211_FREQUENCY_ATTR_2MHZ: 2 MHz operation is allowed
- * on this channel in current regulatory domain.
- * @NL80211_FREQUENCY_ATTR_4MHZ: 4 MHz operation is allowed
- * on this channel in current regulatory domain.
- * @NL80211_FREQUENCY_ATTR_8MHZ: 8 MHz operation is allowed
- * on this channel in current regulatory domain.
- * @NL80211_FREQUENCY_ATTR_16MHZ: 16 MHz operation is allowed
- * on this channel in current regulatory domain.
- * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
- * currently defined
- * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
- *
- * See https://apps.fcc.gov/eas/comments/GetPublishedDocument.html?id=327&tn=528122
- * for more information on the FCC description of the relaxations allowed
- * by NL80211_FREQUENCY_ATTR_INDOOR_ONLY and
- * NL80211_FREQUENCY_ATTR_IR_CONCURRENT.
- */
- enum nl80211_frequency_attr {
- __NL80211_FREQUENCY_ATTR_INVALID,
- NL80211_FREQUENCY_ATTR_FREQ,
- NL80211_FREQUENCY_ATTR_DISABLED,
- NL80211_FREQUENCY_ATTR_NO_IR,
- __NL80211_FREQUENCY_ATTR_NO_IBSS,
- NL80211_FREQUENCY_ATTR_RADAR,
- NL80211_FREQUENCY_ATTR_MAX_TX_POWER,
- NL80211_FREQUENCY_ATTR_DFS_STATE,
- NL80211_FREQUENCY_ATTR_DFS_TIME,
- NL80211_FREQUENCY_ATTR_NO_HT40_MINUS,
- NL80211_FREQUENCY_ATTR_NO_HT40_PLUS,
- NL80211_FREQUENCY_ATTR_NO_80MHZ,
- NL80211_FREQUENCY_ATTR_NO_160MHZ,
- NL80211_FREQUENCY_ATTR_DFS_CAC_TIME,
- NL80211_FREQUENCY_ATTR_INDOOR_ONLY,
- NL80211_FREQUENCY_ATTR_IR_CONCURRENT,
- NL80211_FREQUENCY_ATTR_NO_20MHZ,
- NL80211_FREQUENCY_ATTR_NO_10MHZ,
- NL80211_FREQUENCY_ATTR_WMM,
- NL80211_FREQUENCY_ATTR_NO_HE,
- NL80211_FREQUENCY_ATTR_OFFSET,
- NL80211_FREQUENCY_ATTR_1MHZ,
- NL80211_FREQUENCY_ATTR_2MHZ,
- NL80211_FREQUENCY_ATTR_4MHZ,
- NL80211_FREQUENCY_ATTR_8MHZ,
- NL80211_FREQUENCY_ATTR_16MHZ,
- /* keep last */
- __NL80211_FREQUENCY_ATTR_AFTER_LAST,
- NL80211_FREQUENCY_ATTR_MAX = __NL80211_FREQUENCY_ATTR_AFTER_LAST - 1
- };
- #define NL80211_FREQUENCY_ATTR_MAX_TX_POWER NL80211_FREQUENCY_ATTR_MAX_TX_POWER
- #define NL80211_FREQUENCY_ATTR_PASSIVE_SCAN NL80211_FREQUENCY_ATTR_NO_IR
- #define NL80211_FREQUENCY_ATTR_NO_IBSS NL80211_FREQUENCY_ATTR_NO_IR
- #define NL80211_FREQUENCY_ATTR_NO_IR NL80211_FREQUENCY_ATTR_NO_IR
- #define NL80211_FREQUENCY_ATTR_GO_CONCURRENT \
- NL80211_FREQUENCY_ATTR_IR_CONCURRENT
- /**
- * enum nl80211_bitrate_attr - bitrate attributes
- * @__NL80211_BITRATE_ATTR_INVALID: attribute number 0 is reserved
- * @NL80211_BITRATE_ATTR_RATE: Bitrate in units of 100 kbps
- * @NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE: Short preamble supported
- * in 2.4 GHz band.
- * @NL80211_BITRATE_ATTR_MAX: highest bitrate attribute number
- * currently defined
- * @__NL80211_BITRATE_ATTR_AFTER_LAST: internal use
- */
- enum nl80211_bitrate_attr {
- __NL80211_BITRATE_ATTR_INVALID,
- NL80211_BITRATE_ATTR_RATE,
- NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE,
- /* keep last */
- __NL80211_BITRATE_ATTR_AFTER_LAST,
- NL80211_BITRATE_ATTR_MAX = __NL80211_BITRATE_ATTR_AFTER_LAST - 1
- };
- /**
- * enum nl80211_initiator - Indicates the initiator of a reg domain request
- * @NL80211_REGDOM_SET_BY_CORE: Core queried CRDA for a dynamic world
- * regulatory domain.
- * @NL80211_REGDOM_SET_BY_USER: User asked the wireless core to set the
- * regulatory domain.
- * @NL80211_REGDOM_SET_BY_DRIVER: a wireless drivers has hinted to the
- * wireless core it thinks its knows the regulatory domain we should be in.
- * @NL80211_REGDOM_SET_BY_COUNTRY_IE: the wireless core has received an
- * 802.11 country information element with regulatory information it
- * thinks we should consider. cfg80211 only processes the country
- * code from the IE, and relies on the regulatory domain information
- * structure passed by userspace (CRDA) from our wireless-regdb.
- * If a channel is enabled but the country code indicates it should
- * be disabled we disable the channel and re-enable it upon disassociation.
- */
- enum nl80211_reg_initiator {
- NL80211_REGDOM_SET_BY_CORE,
- NL80211_REGDOM_SET_BY_USER,
- NL80211_REGDOM_SET_BY_DRIVER,
- NL80211_REGDOM_SET_BY_COUNTRY_IE,
- };
- /**
- * enum nl80211_reg_type - specifies the type of regulatory domain
- * @NL80211_REGDOM_TYPE_COUNTRY: the regulatory domain set is one that pertains
- * to a specific country. When this is set you can count on the
- * ISO / IEC 3166 alpha2 country code being valid.
- * @NL80211_REGDOM_TYPE_WORLD: the regulatory set domain is the world regulatory
- * domain.
- * @NL80211_REGDOM_TYPE_CUSTOM_WORLD: the regulatory domain set is a custom
- * driver specific world regulatory domain. These do not apply system-wide
- * and are only applicable to the individual devices which have requested
- * them to be applied.
- * @NL80211_REGDOM_TYPE_INTERSECTION: the regulatory domain set is the product
- * of an intersection between two regulatory domains -- the previously
- * set regulatory domain on the system and the last accepted regulatory
- * domain request to be processed.
- */
- enum nl80211_reg_type {
- NL80211_REGDOM_TYPE_COUNTRY,
- NL80211_REGDOM_TYPE_WORLD,
- NL80211_REGDOM_TYPE_CUSTOM_WORLD,
- NL80211_REGDOM_TYPE_INTERSECTION,
- };
- /**
- * enum nl80211_reg_rule_attr - regulatory rule attributes
- * @__NL80211_REG_RULE_ATTR_INVALID: attribute number 0 is reserved
- * @NL80211_ATTR_REG_RULE_FLAGS: a set of flags which specify additional
- * considerations for a given frequency range. These are the
- * &enum nl80211_reg_rule_flags.
- * @NL80211_ATTR_FREQ_RANGE_START: starting frequencry for the regulatory
- * rule in KHz. This is not a center of frequency but an actual regulatory
- * band edge.
- * @NL80211_ATTR_FREQ_RANGE_END: ending frequency for the regulatory rule
- * in KHz. This is not a center a frequency but an actual regulatory
- * band edge.
- * @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this
- * frequency range, in KHz.
- * @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain
- * for a given frequency range. The value is in mBi (100 * dBi).
- * If you don't have one then don't send this.
- * @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for
- * a given frequency range. The value is in mBm (100 * dBm).
- * @NL80211_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds.
- * If not present or 0 default CAC time will be used.
- * @NL80211_REG_RULE_ATTR_MAX: highest regulatory rule attribute number
- * currently defined
- * @__NL80211_REG_RULE_ATTR_AFTER_LAST: internal use
- */
- enum nl80211_reg_rule_attr {
- __NL80211_REG_RULE_ATTR_INVALID,
- NL80211_ATTR_REG_RULE_FLAGS,
- NL80211_ATTR_FREQ_RANGE_START,
- NL80211_ATTR_FREQ_RANGE_END,
- NL80211_ATTR_FREQ_RANGE_MAX_BW,
- NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN,
- NL80211_ATTR_POWER_RULE_MAX_EIRP,
- NL80211_ATTR_DFS_CAC_TIME,
- /* keep last */
- __NL80211_REG_RULE_ATTR_AFTER_LAST,
- NL80211_REG_RULE_ATTR_MAX = __NL80211_REG_RULE_ATTR_AFTER_LAST - 1
- };
- /**
- * enum nl80211_sched_scan_match_attr - scheduled scan match attributes
- * @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved
- * @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching,
- * only report BSS with matching SSID.
- * (This cannot be used together with BSSID.)
- * @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI: RSSI threshold (in dBm) for reporting a
- * BSS in scan results. Filtering is turned off if not specified. Note that
- * if this attribute is in a match set of its own, then it is treated as
- * the default value for all matchsets with an SSID, rather than being a
- * matchset of its own without an RSSI filter. This is due to problems with
- * how this API was implemented in the past. Also, due to the same problem,
- * the only way to create a matchset with only an RSSI filter (with this
- * attribute) is if there's only a single matchset with the RSSI attribute.
- * @NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI: Flag indicating whether
- * %NL80211_SCHED_SCAN_MATCH_ATTR_RSSI to be used as absolute RSSI or
- * relative to current bss's RSSI.
- * @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST: When present the RSSI level for
- * BSS-es in the specified band is to be adjusted before doing
- * RSSI-based BSS selection. The attribute value is a packed structure
- * value as specified by &struct nl80211_bss_select_rssi_adjust.
- * @NL80211_SCHED_SCAN_MATCH_ATTR_BSSID: BSSID to be used for matching
- * (this cannot be used together with SSID).
- * @NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI: Nested attribute that carries the
- * band specific minimum rssi thresholds for the bands defined in
- * enum nl80211_band. The minimum rssi threshold value(s32) specific to a
- * band shall be encapsulated in attribute with type value equals to one
- * of the NL80211_BAND_* defined in enum nl80211_band. For example, the
- * minimum rssi threshold value for 2.4GHZ band shall be encapsulated
- * within an attribute of type NL80211_BAND_2GHZ. And one or more of such
- * attributes will be nested within this attribute.
- * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter
- * attribute number currently defined
- * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use
- */
- enum nl80211_sched_scan_match_attr {
- __NL80211_SCHED_SCAN_MATCH_ATTR_INVALID,
- NL80211_SCHED_SCAN_MATCH_ATTR_SSID,
- NL80211_SCHED_SCAN_MATCH_ATTR_RSSI,
- NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI,
- NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST,
- NL80211_SCHED_SCAN_MATCH_ATTR_BSSID,
- NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI,
- /* keep last */
- __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST,
- NL80211_SCHED_SCAN_MATCH_ATTR_MAX =
- __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST - 1
- };
- /* only for backward compatibility */
- #define NL80211_ATTR_SCHED_SCAN_MATCH_SSID NL80211_SCHED_SCAN_MATCH_ATTR_SSID
- /**
- * enum nl80211_reg_rule_flags - regulatory rule flags
- *
- * @NL80211_RRF_NO_OFDM: OFDM modulation not allowed
- * @NL80211_RRF_NO_CCK: CCK modulation not allowed
- * @NL80211_RRF_NO_INDOOR: indoor operation not allowed
- * @NL80211_RRF_NO_OUTDOOR: outdoor operation not allowed
- * @NL80211_RRF_DFS: DFS support is required to be used
- * @NL80211_RRF_PTP_ONLY: this is only for Point To Point links
- * @NL80211_RRF_PTMP_ONLY: this is only for Point To Multi Point links
- * @NL80211_RRF_NO_IR: no mechanisms that initiate radiation are allowed,
- * this includes probe requests or modes of operation that require
- * beaconing.
- * @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated
- * base on contiguous rules and wider channels will be allowed to cross
- * multiple contiguous/overlapping frequency ranges.
- * @NL80211_RRF_IR_CONCURRENT: See %NL80211_FREQUENCY_ATTR_IR_CONCURRENT
- * @NL80211_RRF_NO_HT40MINUS: channels can't be used in HT40- operation
- * @NL80211_RRF_NO_HT40PLUS: channels can't be used in HT40+ operation
- * @NL80211_RRF_NO_80MHZ: 80MHz operation not allowed
- * @NL80211_RRF_NO_160MHZ: 160MHz operation not allowed
- * @NL80211_RRF_NO_HE: HE operation not allowed
- */
- enum nl80211_reg_rule_flags {
- NL80211_RRF_NO_OFDM = 1<<0,
- NL80211_RRF_NO_CCK = 1<<1,
- NL80211_RRF_NO_INDOOR = 1<<2,
- NL80211_RRF_NO_OUTDOOR = 1<<3,
- NL80211_RRF_DFS = 1<<4,
- NL80211_RRF_PTP_ONLY = 1<<5,
- NL80211_RRF_PTMP_ONLY = 1<<6,
- NL80211_RRF_NO_IR = 1<<7,
- __NL80211_RRF_NO_IBSS = 1<<8,
- NL80211_RRF_AUTO_BW = 1<<11,
- NL80211_RRF_IR_CONCURRENT = 1<<12,
- NL80211_RRF_NO_HT40MINUS = 1<<13,
- NL80211_RRF_NO_HT40PLUS = 1<<14,
- NL80211_RRF_NO_80MHZ = 1<<15,
- NL80211_RRF_NO_160MHZ = 1<<16,
- NL80211_RRF_NO_HE = 1<<17,
- };
- #define NL80211_RRF_PASSIVE_SCAN NL80211_RRF_NO_IR
- #define NL80211_RRF_NO_IBSS NL80211_RRF_NO_IR
- #define NL80211_RRF_NO_IR NL80211_RRF_NO_IR
- #define NL80211_RRF_NO_HT40 (NL80211_RRF_NO_HT40MINUS |\
- NL80211_RRF_NO_HT40PLUS)
- #define NL80211_RRF_GO_CONCURRENT NL80211_RRF_IR_CONCURRENT
- /* For backport compatibility with older userspace */
- #define NL80211_RRF_NO_IR_ALL (NL80211_RRF_NO_IR | __NL80211_RRF_NO_IBSS)
- /**
- * enum nl80211_dfs_regions - regulatory DFS regions
- *
- * @NL80211_DFS_UNSET: Country has no DFS master region specified
- * @NL80211_DFS_FCC: Country follows DFS master rules from FCC
- * @NL80211_DFS_ETSI: Country follows DFS master rules from ETSI
- * @NL80211_DFS_JP: Country follows DFS master rules from JP/MKK/Telec
- */
- enum nl80211_dfs_regions {
- NL80211_DFS_UNSET = 0,
- NL80211_DFS_FCC = 1,
- NL80211_DFS_ETSI = 2,
- NL80211_DFS_JP = 3,
- };
- /**
- * enum nl80211_user_reg_hint_type - type of user regulatory hint
- *
- * @NL80211_USER_REG_HINT_USER: a user sent the hint. This is always
- * assumed if the attribute is not set.
- * @NL80211_USER_REG_HINT_CELL_BASE: the hint comes from a cellular
- * base station. Device drivers that have been tested to work
- * properly to support this type of hint can enable these hints
- * by setting the NL80211_FEATURE_CELL_BASE_REG_HINTS feature
- * capability on the struct wiphy. The wireless core will
- * ignore all cell base station hints until at least one device
- * present has been registered with the wireless core that
- * has listed NL80211_FEATURE_CELL_BASE_REG_HINTS as a
- * supported feature.
- * @NL80211_USER_REG_HINT_INDOOR: a user sent an hint indicating that the
- * platform is operating in an indoor environment.
- */
- enum nl80211_user_reg_hint_type {
- NL80211_USER_REG_HINT_USER = 0,
- NL80211_USER_REG_HINT_CELL_BASE = 1,
- NL80211_USER_REG_HINT_INDOOR = 2,
- };
- /**
- * enum nl80211_survey_info - survey information
- *
- * These attribute types are used with %NL80211_ATTR_SURVEY_INFO
- * when getting information about a survey.
- *
- * @__NL80211_SURVEY_INFO_INVALID: attribute number 0 is reserved
- * @NL80211_SURVEY_INFO_FREQUENCY: center frequency of channel
- * @NL80211_SURVEY_INFO_NOISE: noise level of channel (u8, dBm)
- * @NL80211_SURVEY_INFO_IN_USE: channel is currently being used
- * @NL80211_SURVEY_INFO_TIME: amount of time (in ms) that the radio
- * was turned on (on channel or globally)
- * @NL80211_SURVEY_INFO_TIME_BUSY: amount of the time the primary
- * channel was sensed busy (either due to activity or energy detect)
- * @NL80211_SURVEY_INFO_TIME_EXT_BUSY: amount of time the extension
- * channel was sensed busy
- * @NL80211_SURVEY_INFO_TIME_RX: amount of time the radio spent
- * receiving data (on channel or globally)
- * @NL80211_SURVEY_INFO_TIME_TX: amount of time the radio spent
- * transmitting data (on channel or globally)
- * @NL80211_SURVEY_INFO_TIME_SCAN: time the radio spent for scan
- * (on this channel or globally)
- * @NL80211_SURVEY_INFO_PAD: attribute used for padding for 64-bit alignment
- * @NL80211_SURVEY_INFO_TIME_BSS_RX: amount of time the radio spent
- * receiving frames destined to the local BSS
- * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number
- * currently defined
- * @NL80211_SURVEY_INFO_FREQUENCY_OFFSET: center frequency offset in KHz
- * @__NL80211_SURVEY_INFO_AFTER_LAST: internal use
- */
- enum nl80211_survey_info {
- __NL80211_SURVEY_INFO_INVALID,
- NL80211_SURVEY_INFO_FREQUENCY,
- NL80211_SURVEY_INFO_NOISE,
- NL80211_SURVEY_INFO_IN_USE,
- NL80211_SURVEY_INFO_TIME,
- NL80211_SURVEY_INFO_TIME_BUSY,
- NL80211_SURVEY_INFO_TIME_EXT_BUSY,
- NL80211_SURVEY_INFO_TIME_RX,
- NL80211_SURVEY_INFO_TIME_TX,
- NL80211_SURVEY_INFO_TIME_SCAN,
- NL80211_SURVEY_INFO_PAD,
- NL80211_SURVEY_INFO_TIME_BSS_RX,
- NL80211_SURVEY_INFO_FREQUENCY_OFFSET,
- /* keep last */
- __NL80211_SURVEY_INFO_AFTER_LAST,
- NL80211_SURVEY_INFO_MAX = __NL80211_SURVEY_INFO_AFTER_LAST - 1
- };
- /* keep old names for compatibility */
- #define NL80211_SURVEY_INFO_CHANNEL_TIME NL80211_SURVEY_INFO_TIME
- #define NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY NL80211_SURVEY_INFO_TIME_BUSY
- #define NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY NL80211_SURVEY_INFO_TIME_EXT_BUSY
- #define NL80211_SURVEY_INFO_CHANNEL_TIME_RX NL80211_SURVEY_INFO_TIME_RX
- #define NL80211_SURVEY_INFO_CHANNEL_TIME_TX NL80211_SURVEY_INFO_TIME_TX
- /**
- * enum nl80211_mntr_flags - monitor configuration flags
- *
- * Monitor configuration flags.
- *
- * @__NL80211_MNTR_FLAG_INVALID: reserved
- *
- * @NL80211_MNTR_FLAG_FCSFAIL: pass frames with bad FCS
- * @NL80211_MNTR_FLAG_PLCPFAIL: pass frames with bad PLCP
- * @NL80211_MNTR_FLAG_CONTROL: pass control frames
- * @NL80211_MNTR_FLAG_OTHER_BSS: disable BSSID filtering
- * @NL80211_MNTR_FLAG_COOK_FRAMES: report frames after processing.
- * overrides all other flags.
- * @NL80211_MNTR_FLAG_ACTIVE: use the configured MAC address
- * and ACK incoming unicast packets.
- *
- * @__NL80211_MNTR_FLAG_AFTER_LAST: internal use
- * @NL80211_MNTR_FLAG_MAX: highest possible monitor flag
- */
- enum nl80211_mntr_flags {
- __NL80211_MNTR_FLAG_INVALID,
- NL80211_MNTR_FLAG_FCSFAIL,
- NL80211_MNTR_FLAG_PLCPFAIL,
- NL80211_MNTR_FLAG_CONTROL,
- NL80211_MNTR_FLAG_OTHER_BSS,
- NL80211_MNTR_FLAG_COOK_FRAMES,
- NL80211_MNTR_FLAG_ACTIVE,
- /* keep last */
- __NL80211_MNTR_FLAG_AFTER_LAST,
- NL80211_MNTR_FLAG_MAX = __NL80211_MNTR_FLAG_AFTER_LAST - 1
- };
- /**
- * enum nl80211_mesh_power_mode - mesh power save modes
- *
- * @NL80211_MESH_POWER_UNKNOWN: The mesh power mode of the mesh STA is
- * not known or has not been set yet.
- * @NL80211_MESH_POWER_ACTIVE: Active mesh power mode. The mesh STA is
- * in Awake state all the time.
- * @NL80211_MESH_POWER_LIGHT_SLEEP: Light sleep mode. The mesh STA will
- * alternate between Active and Doze states, but will wake up for
- * neighbor's beacons.
- * @NL80211_MESH_POWER_DEEP_SLEEP: Deep sleep mode. The mesh STA will
- * alternate between Active and Doze states, but may not wake up
- * for neighbor's beacons.
- *
- * @__NL80211_MESH_POWER_AFTER_LAST - internal use
- * @NL80211_MESH_POWER_MAX - highest possible power save level
- */
- enum nl80211_mesh_power_mode {
- NL80211_MESH_POWER_UNKNOWN,
- NL80211_MESH_POWER_ACTIVE,
- NL80211_MESH_POWER_LIGHT_SLEEP,
- NL80211_MESH_POWER_DEEP_SLEEP,
- __NL80211_MESH_POWER_AFTER_LAST,
- NL80211_MESH_POWER_MAX = __NL80211_MESH_POWER_AFTER_LAST - 1
- };
- /**
- * enum nl80211_meshconf_params - mesh configuration parameters
- *
- * Mesh configuration parameters. These can be changed while the mesh is
- * active.
- *
- * @__NL80211_MESHCONF_INVALID: internal use
- *
- * @NL80211_MESHCONF_RETRY_TIMEOUT: specifies the initial retry timeout in
- * millisecond units, used by the Peer Link Open message
- *
- * @NL80211_MESHCONF_CONFIRM_TIMEOUT: specifies the initial confirm timeout, in
- * millisecond units, used by the peer link management to close a peer link
- *
- * @NL80211_MESHCONF_HOLDING_TIMEOUT: specifies the holding timeout, in
- * millisecond units
- *
- * @NL80211_MESHCONF_MAX_PEER_LINKS: maximum number of peer links allowed
- * on this mesh interface
- *
- * @NL80211_MESHCONF_MAX_RETRIES: specifies the maximum number of peer link
- * open retries that can be sent to establish a new peer link instance in a
- * mesh
- *
- * @NL80211_MESHCONF_TTL: specifies the value of TTL field set at a source mesh
- * point.
- *
- * @NL80211_MESHCONF_AUTO_OPEN_PLINKS: whether we should automatically open
- * peer links when we detect compatible mesh peers. Disabled if
- * @NL80211_MESH_SETUP_USERSPACE_MPM or @NL80211_MESH_SETUP_USERSPACE_AMPE are
- * set.
- *
- * @NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES: the number of action frames
- * containing a PREQ that an MP can send to a particular destination (path
- * target)
- *
- * @NL80211_MESHCONF_PATH_REFRESH_TIME: how frequently to refresh mesh paths
- * (in milliseconds)
- *
- * @NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT: minimum length of time to wait
- * until giving up on a path discovery (in milliseconds)
- *
- * @NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT: The time (in TUs) for which mesh
- * points receiving a PREQ shall consider the forwarding information from
- * the root to be valid. (TU = time unit)
- *
- * @NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL: The minimum interval of time (in
- * TUs) during which an MP can send only one action frame containing a PREQ
- * reference element
- *
- * @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs)
- * that it takes for an HWMP information element to propagate across the
- * mesh
- *
- * @NL80211_MESHCONF_HWMP_ROOTMODE: whether root mode is enabled or not
- *
- * @NL80211_MESHCONF_ELEMENT_TTL: specifies the value of TTL field set at a
- * source mesh point for path selection elements.
- *
- * @NL80211_MESHCONF_HWMP_RANN_INTERVAL: The interval of time (in TUs) between
- * root announcements are transmitted.
- *
- * @NL80211_MESHCONF_GATE_ANNOUNCEMENTS: Advertise that this mesh station has
- * access to a broader network beyond the MBSS. This is done via Root
- * Announcement frames.
- *
- * @NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL: The minimum interval of time (in
- * TUs) during which a mesh STA can send only one Action frame containing a
- * PERR element.
- *
- * @NL80211_MESHCONF_FORWARDING: set Mesh STA as forwarding or non-forwarding
- * or forwarding entity (default is TRUE - forwarding entity)
- *
- * @NL80211_MESHCONF_RSSI_THRESHOLD: RSSI threshold in dBm. This specifies the
- * threshold for average signal strength of candidate station to establish
- * a peer link.
- *
- * @NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR: maximum number of neighbors
- * to synchronize to for 11s default synchronization method
- * (see 11C.12.2.2)
- *
- * @NL80211_MESHCONF_HT_OPMODE: set mesh HT protection mode.
- *
- * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute
- *
- * @NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT: The time (in TUs) for
- * which mesh STAs receiving a proactive PREQ shall consider the forwarding
- * information to the root mesh STA to be valid.
- *
- * @NL80211_MESHCONF_HWMP_ROOT_INTERVAL: The interval of time (in TUs) between
- * proactive PREQs are transmitted.
- *
- * @NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL: The minimum interval of time
- * (in TUs) during which a mesh STA can send only one Action frame
- * containing a PREQ element for root path confirmation.
- *
- * @NL80211_MESHCONF_POWER_MODE: Default mesh power mode for new peer links.
- * type &enum nl80211_mesh_power_mode (u32)
- *
- * @NL80211_MESHCONF_AWAKE_WINDOW: awake window duration (in TUs)
- *
- * @NL80211_MESHCONF_PLINK_TIMEOUT: If no tx activity is seen from a STA we've
- * established peering with for longer than this time (in seconds), then
- * remove it from the STA's list of peers. You may set this to 0 to disable
- * the removal of the STA. Default is 30 minutes.
- *
- * @NL80211_MESHCONF_CONNECTED_TO_GATE: If set to true then this mesh STA
- * will advertise that it is connected to a gate in the mesh formation
- * field. If left unset then the mesh formation field will only
- * advertise such if there is an active root mesh path.
- *
- * @NL80211_MESHCONF_NOLEARN: Try to avoid multi-hop path discovery (e.g.
- * PREQ/PREP for HWMP) if the destination is a direct neighbor. Note that
- * this might not be the optimal decision as a multi-hop route might be
- * better. So if using this setting you will likely also want to disable
- * dot11MeshForwarding and use another mesh routing protocol on top.
- *
- * @NL80211_MESHCONF_CONNECTED_TO_AS: If set to true then this mesh STA
- * will advertise that it is connected to a authentication server
- * in the mesh formation field.
- *
- * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
- */
- enum nl80211_meshconf_params {
- __NL80211_MESHCONF_INVALID,
- NL80211_MESHCONF_RETRY_TIMEOUT,
- NL80211_MESHCONF_CONFIRM_TIMEOUT,
- NL80211_MESHCONF_HOLDING_TIMEOUT,
- NL80211_MESHCONF_MAX_PEER_LINKS,
- NL80211_MESHCONF_MAX_RETRIES,
- NL80211_MESHCONF_TTL,
- NL80211_MESHCONF_AUTO_OPEN_PLINKS,
- NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES,
- NL80211_MESHCONF_PATH_REFRESH_TIME,
- NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT,
- NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT,
- NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL,
- NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME,
- NL80211_MESHCONF_HWMP_ROOTMODE,
- NL80211_MESHCONF_ELEMENT_TTL,
- NL80211_MESHCONF_HWMP_RANN_INTERVAL,
- NL80211_MESHCONF_GATE_ANNOUNCEMENTS,
- NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL,
- NL80211_MESHCONF_FORWARDING,
- NL80211_MESHCONF_RSSI_THRESHOLD,
- NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR,
- NL80211_MESHCONF_HT_OPMODE,
- NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT,
- NL80211_MESHCONF_HWMP_ROOT_INTERVAL,
- NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL,
- NL80211_MESHCONF_POWER_MODE,
- NL80211_MESHCONF_AWAKE_WINDOW,
- NL80211_MESHCONF_PLINK_TIMEOUT,
- NL80211_MESHCONF_CONNECTED_TO_GATE,
- NL80211_MESHCONF_NOLEARN,
- NL80211_MESHCONF_CONNECTED_TO_AS,
- /* keep last */
- __NL80211_MESHCONF_ATTR_AFTER_LAST,
- NL80211_MESHCONF_ATTR_MAX = __NL80211_MESHCONF_ATTR_AFTER_LAST - 1
- };
- /**
- * enum nl80211_mesh_setup_params - mesh setup parameters
- *
- * Mesh setup parameters. These are used to start/join a mesh and cannot be
- * changed while the mesh is active.
- *
- * @__NL80211_MESH_SETUP_INVALID: Internal use
- *
- * @NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL: Enable this option to use a
- * vendor specific path selection algorithm or disable it to use the
- * default HWMP.
- *
- * @NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC: Enable this option to use a
- * vendor specific path metric or disable it to use the default Airtime
- * metric.
- *
- * @NL80211_MESH_SETUP_IE: Information elements for this mesh, for instance, a
- * robust security network ie, or a vendor specific information element
- * that vendors will use to identify the path selection methods and
- * metrics in use.
- *
- * @NL80211_MESH_SETUP_USERSPACE_AUTH: Enable this option if an authentication
- * daemon will be authenticating mesh candidates.
- *
- * @NL80211_MESH_SETUP_USERSPACE_AMPE: Enable this option if an authentication
- * daemon will be securing peer link frames. AMPE is a secured version of
- * Mesh Peering Management (MPM) and is implemented with the assistance of
- * a userspace daemon. When this flag is set, the kernel will send peer
- * management frames to a userspace daemon that will implement AMPE
- * functionality (security capabilities selection, key confirmation, and
- * key management). When the flag is unset (default), the kernel can
- * autonomously complete (unsecured) mesh peering without the need of a
- * userspace daemon.
- *
- * @NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC: Enable this option to use a
- * vendor specific synchronization method or disable it to use the default
- * neighbor offset synchronization
- *
- * @NL80211_MESH_SETUP_USERSPACE_MPM: Enable this option if userspace will
- * implement an MPM which handles peer allocation and state.
- *
- * @NL80211_MESH_SETUP_AUTH_PROTOCOL: Inform the kernel of the authentication
- * method (u8, as defined in IEEE 8.4.2.100.6, e.g. 0x1 for SAE).
- * Default is no authentication method required.
- *
- * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number
- *
- * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use
- */
- enum nl80211_mesh_setup_params {
- __NL80211_MESH_SETUP_INVALID,
- NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL,
- NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC,
- NL80211_MESH_SETUP_IE,
- NL80211_MESH_SETUP_USERSPACE_AUTH,
- NL80211_MESH_SETUP_USERSPACE_AMPE,
- NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC,
- NL80211_MESH_SETUP_USERSPACE_MPM,
- NL80211_MESH_SETUP_AUTH_PROTOCOL,
- /* keep last */
- __NL80211_MESH_SETUP_ATTR_AFTER_LAST,
- NL80211_MESH_SETUP_ATTR_MAX = __NL80211_MESH_SETUP_ATTR_AFTER_LAST - 1
- };
- /**
- * enum nl80211_txq_attr - TX queue parameter attributes
- * @__NL80211_TXQ_ATTR_INVALID: Attribute number 0 is reserved
- * @NL80211_TXQ_ATTR_AC: AC identifier (NL80211_AC_*)
- * @NL80211_TXQ_ATTR_TXOP: Maximum burst time in units of 32 usecs, 0 meaning
- * disabled
- * @NL80211_TXQ_ATTR_CWMIN: Minimum contention window [a value of the form
- * 2^n-1 in the range 1..32767]
- * @NL80211_TXQ_ATTR_CWMAX: Maximum contention window [a value of the form
- * 2^n-1 in the range 1..32767]
- * @NL80211_TXQ_ATTR_AIFS: Arbitration interframe space [0..255]
- * @__NL80211_TXQ_ATTR_AFTER_LAST: Internal
- * @NL80211_TXQ_ATTR_MAX: Maximum TXQ attribute number
- */
- enum nl80211_txq_attr {
- __NL80211_TXQ_ATTR_INVALID,
- NL80211_TXQ_ATTR_AC,
- NL80211_TXQ_ATTR_TXOP,
- NL80211_TXQ_ATTR_CWMIN,
- NL80211_TXQ_ATTR_CWMAX,
- NL80211_TXQ_ATTR_AIFS,
- /* keep last */
- __NL80211_TXQ_ATTR_AFTER_LAST,
- NL80211_TXQ_ATTR_MAX = __NL80211_TXQ_ATTR_AFTER_LAST - 1
- };
- enum nl80211_ac {
- NL80211_AC_VO,
- NL80211_AC_VI,
- NL80211_AC_BE,
- NL80211_AC_BK,
- NL80211_NUM_ACS
- };
- /* backward compat */
- #define NL80211_TXQ_ATTR_QUEUE NL80211_TXQ_ATTR_AC
- #define NL80211_TXQ_Q_VO NL80211_AC_VO
- #define NL80211_TXQ_Q_VI NL80211_AC_VI
- #define NL80211_TXQ_Q_BE NL80211_AC_BE
- #define NL80211_TXQ_Q_BK NL80211_AC_BK
- /**
- * enum nl80211_channel_type - channel type
- * @NL80211_CHAN_NO_HT: 20 MHz, non-HT channel
- * @NL80211_CHAN_HT20: 20 MHz HT channel
- * @NL80211_CHAN_HT40MINUS: HT40 channel, secondary channel
- * below the control channel
- * @NL80211_CHAN_HT40PLUS: HT40 channel, secondary channel
- * above the control channel
- */
- enum nl80211_channel_type {
- NL80211_CHAN_NO_HT,
- NL80211_CHAN_HT20,
- NL80211_CHAN_HT40MINUS,
- NL80211_CHAN_HT40PLUS
- };
- /**
- * enum nl80211_key_mode - Key mode
- *
- * @NL80211_KEY_RX_TX: (Default)
- * Key can be used for Rx and Tx immediately
- *
- * The following modes can only be selected for unicast keys and when the
- * driver supports @NL80211_EXT_FEATURE_EXT_KEY_ID:
- *
- * @NL80211_KEY_NO_TX: Only allowed in combination with @NL80211_CMD_NEW_KEY:
- * Unicast key can only be used for Rx, Tx not allowed, yet
- * @NL80211_KEY_SET_TX: Only allowed in combination with @NL80211_CMD_SET_KEY:
- * The unicast key identified by idx and mac is cleared for Tx and becomes
- * the preferred Tx key for the station.
- */
- enum nl80211_key_mode {
- NL80211_KEY_RX_TX,
- NL80211_KEY_NO_TX,
- NL80211_KEY_SET_TX
- };
- /**
- * enum nl80211_chan_width - channel width definitions
- *
- * These values are used with the %NL80211_ATTR_CHANNEL_WIDTH
- * attribute.
- *
- * @NL80211_CHAN_WIDTH_20_NOHT: 20 MHz, non-HT channel
- * @NL80211_CHAN_WIDTH_20: 20 MHz HT channel
- * @NL80211_CHAN_WIDTH_40: 40 MHz channel, the %NL80211_ATTR_CENTER_FREQ1
- * attribute must be provided as well
- * @NL80211_CHAN_WIDTH_80: 80 MHz channel, the %NL80211_ATTR_CENTER_FREQ1
- * attribute must be provided as well
- * @NL80211_CHAN_WIDTH_80P80: 80+80 MHz channel, the %NL80211_ATTR_CENTER_FREQ1
- * and %NL80211_ATTR_CENTER_FREQ2 attributes must be provided as well
- * @NL80211_CHAN_WIDTH_160: 160 MHz channel, the %NL80211_ATTR_CENTER_FREQ1
- * attribute must be provided as well
- * @NL80211_CHAN_WIDTH_5: 5 MHz OFDM channel
- * @NL80211_CHAN_WIDTH_10: 10 MHz OFDM channel
- * @NL80211_CHAN_WIDTH_1: 1 MHz OFDM channel
- * @NL80211_CHAN_WIDTH_2: 2 MHz OFDM channel
- * @NL80211_CHAN_WIDTH_4: 4 MHz OFDM channel
- * @NL80211_CHAN_WIDTH_8: 8 MHz OFDM channel
- * @NL80211_CHAN_WIDTH_16: 16 MHz OFDM channel
- */
- enum nl80211_chan_width {
- NL80211_CHAN_WIDTH_20_NOHT,
- NL80211_CHAN_WIDTH_20,
- NL80211_CHAN_WIDTH_40,
- NL80211_CHAN_WIDTH_80,
- NL80211_CHAN_WIDTH_80P80,
- NL80211_CHAN_WIDTH_160,
- NL80211_CHAN_WIDTH_5,
- NL80211_CHAN_WIDTH_10,
- NL80211_CHAN_WIDTH_1,
- NL80211_CHAN_WIDTH_2,
- NL80211_CHAN_WIDTH_4,
- NL80211_CHAN_WIDTH_8,
- NL80211_CHAN_WIDTH_16,
- };
- /**
- * enum nl80211_bss_scan_width - control channel width for a BSS
- *
- * These values are used with the %NL80211_BSS_CHAN_WIDTH attribute.
- *
- * @NL80211_BSS_CHAN_WIDTH_20: control channel is 20 MHz wide or compatible
- * @NL80211_BSS_CHAN_WIDTH_10: control channel is 10 MHz wide
- * @NL80211_BSS_CHAN_WIDTH_5: control channel is 5 MHz wide
- * @NL80211_BSS_CHAN_WIDTH_1: control channel is 1 MHz wide
- * @NL80211_BSS_CHAN_WIDTH_2: control channel is 2 MHz wide
- */
- enum nl80211_bss_scan_width {
- NL80211_BSS_CHAN_WIDTH_20,
- NL80211_BSS_CHAN_WIDTH_10,
- NL80211_BSS_CHAN_WIDTH_5,
- NL80211_BSS_CHAN_WIDTH_1,
- NL80211_BSS_CHAN_WIDTH_2,
- };
- /**
- * enum nl80211_bss - netlink attributes for a BSS
- *
- * @__NL80211_BSS_INVALID: invalid
- * @NL80211_BSS_BSSID: BSSID of the BSS (6 octets)
- * @NL80211_BSS_FREQUENCY: frequency in MHz (u32)
- * @NL80211_BSS_TSF: TSF of the received probe response/beacon (u64)
- * (if @NL80211_BSS_PRESP_DATA is present then this is known to be
- * from a probe response, otherwise it may be from the same beacon
- * that the NL80211_BSS_BEACON_TSF will be from)
- * @NL80211_BSS_BEACON_INTERVAL: beacon interval of the (I)BSS (u16)
- * @NL80211_BSS_CAPABILITY: capability field (CPU order, u16)
- * @NL80211_BSS_INFORMATION_ELEMENTS: binary attribute containing the
- * raw information elements from the probe response/beacon (bin);
- * if the %NL80211_BSS_BEACON_IES attribute is present and the data is
- * different then the IEs here are from a Probe Response frame; otherwise
- * they are from a Beacon frame.
- * However, if the driver does not indicate the source of the IEs, these
- * IEs may be from either frame subtype.
- * If present, the @NL80211_BSS_PRESP_DATA attribute indicates that the
- * data here is known to be from a probe response, without any heuristics.
- * @NL80211_BSS_SIGNAL_MBM: signal strength of probe response/beacon
- * in mBm (100 * dBm) (s32)
- * @NL80211_BSS_SIGNAL_UNSPEC: signal strength of the probe response/beacon
- * in unspecified units, scaled to 0..100 (u8)
- * @NL80211_BSS_STATUS: status, if this BSS is "used"
- * @NL80211_BSS_SEEN_MS_AGO: age of this BSS entry in ms
- * @NL80211_BSS_BEACON_IES: binary attribute containing the raw information
- * elements from a Beacon frame (bin); not present if no Beacon frame has
- * yet been received
- * @NL80211_BSS_CHAN_WIDTH: channel width of the control channel
- * (u32, enum nl80211_bss_scan_width)
- * @NL80211_BSS_BEACON_TSF: TSF of the last received beacon (u64)
- * (not present if no beacon frame has been received yet)
- * @NL80211_BSS_PRESP_DATA: the data in @NL80211_BSS_INFORMATION_ELEMENTS and
- * @NL80211_BSS_TSF is known to be from a probe response (flag attribute)
- * @NL80211_BSS_LAST_SEEN_BOOTTIME: CLOCK_BOOTTIME timestamp when this entry
- * was last updated by a received frame. The value is expected to be
- * accurate to about 10ms. (u64, nanoseconds)
- * @NL80211_BSS_PAD: attribute used for padding for 64-bit alignment
- * @NL80211_BSS_PARENT_TSF: the time at the start of reception of the first
- * octet of the timestamp field of the last beacon/probe received for
- * this BSS. The time is the TSF of the BSS specified by
- * @NL80211_BSS_PARENT_BSSID. (u64).
- * @NL80211_BSS_PARENT_BSSID: the BSS according to which @NL80211_BSS_PARENT_TSF
- * is set.
- * @NL80211_BSS_CHAIN_SIGNAL: per-chain signal strength of last BSS update.
- * Contains a nested array of signal strength attributes (u8, dBm),
- * using the nesting index as the antenna number.
- * @NL80211_BSS_FREQUENCY_OFFSET: frequency offset in KHz
- * @__NL80211_BSS_AFTER_LAST: internal
- * @NL80211_BSS_MAX: highest BSS attribute
- */
- enum nl80211_bss {
- __NL80211_BSS_INVALID,
- NL80211_BSS_BSSID,
- NL80211_BSS_FREQUENCY,
- NL80211_BSS_TSF,
- NL80211_BSS_BEACON_INTERVAL,
- NL80211_BSS_CAPABILITY,
- NL80211_BSS_INFORMATION_ELEMENTS,
- NL80211_BSS_SIGNAL_MBM,
- NL80211_BSS_SIGNAL_UNSPEC,
- NL80211_BSS_STATUS,
- NL80211_BSS_SEEN_MS_AGO,
- NL80211_BSS_BEACON_IES,
- NL80211_BSS_CHAN_WIDTH,
- NL80211_BSS_BEACON_TSF,
- NL80211_BSS_PRESP_DATA,
- NL80211_BSS_LAST_SEEN_BOOTTIME,
- NL80211_BSS_PAD,
- NL80211_BSS_PARENT_TSF,
- NL80211_BSS_PARENT_BSSID,
- NL80211_BSS_CHAIN_SIGNAL,
- NL80211_BSS_FREQUENCY_OFFSET,
- /* keep last */
- __NL80211_BSS_AFTER_LAST,
- NL80211_BSS_MAX = __NL80211_BSS_AFTER_LAST - 1
- };
- /**
- * enum nl80211_bss_status - BSS "status"
- * @NL80211_BSS_STATUS_AUTHENTICATED: Authenticated with this BSS.
- * Note that this is no longer used since cfg80211 no longer
- * keeps track of whether or not authentication was done with
- * a given BSS.
- * @NL80211_BSS_STATUS_ASSOCIATED: Associated with this BSS.
- * @NL80211_BSS_STATUS_IBSS_JOINED: Joined to this IBSS.
- *
- * The BSS status is a BSS attribute in scan dumps, which
- * indicates the status the interface has wrt. this BSS.
- */
- enum nl80211_bss_status {
- NL80211_BSS_STATUS_AUTHENTICATED,
- NL80211_BSS_STATUS_ASSOCIATED,
- NL80211_BSS_STATUS_IBSS_JOINED,
- };
- /**
- * enum nl80211_auth_type - AuthenticationType
- *
- * @NL80211_AUTHTYPE_OPEN_SYSTEM: Open System authentication
- * @NL80211_AUTHTYPE_SHARED_KEY: Shared Key authentication (WEP only)
- * @NL80211_AUTHTYPE_FT: Fast BSS Transition (IEEE 802.11r)
- * @NL80211_AUTHTYPE_NETWORK_EAP: Network EAP (some Cisco APs and mainly LEAP)
- * @NL80211_AUTHTYPE_SAE: Simultaneous authentication of equals
- * @NL80211_AUTHTYPE_FILS_SK: Fast Initial Link Setup shared key
- * @NL80211_AUTHTYPE_FILS_SK_PFS: Fast Initial Link Setup shared key with PFS
- * @NL80211_AUTHTYPE_FILS_PK: Fast Initial Link Setup public key
- * @__NL80211_AUTHTYPE_NUM: internal
- * @NL80211_AUTHTYPE_MAX: maximum valid auth algorithm
- * @NL80211_AUTHTYPE_AUTOMATIC: determine automatically (if necessary by
- * trying multiple times); this is invalid in netlink -- leave out
- * the attribute for this on CONNECT commands.
- */
- enum nl80211_auth_type {
- NL80211_AUTHTYPE_OPEN_SYSTEM,
- NL80211_AUTHTYPE_SHARED_KEY,
- NL80211_AUTHTYPE_FT,
- NL80211_AUTHTYPE_NETWORK_EAP,
- NL80211_AUTHTYPE_SAE,
- NL80211_AUTHTYPE_FILS_SK,
- NL80211_AUTHTYPE_FILS_SK_PFS,
- NL80211_AUTHTYPE_FILS_PK,
- /* keep last */
- __NL80211_AUTHTYPE_NUM,
- NL80211_AUTHTYPE_MAX = __NL80211_AUTHTYPE_NUM - 1,
- NL80211_AUTHTYPE_AUTOMATIC
- };
- /**
- * enum nl80211_key_type - Key Type
- * @NL80211_KEYTYPE_GROUP: Group (broadcast/multicast) key
- * @NL80211_KEYTYPE_PAIRWISE: Pairwise (unicast/individual) key
- * @NL80211_KEYTYPE_PEERKEY: PeerKey (DLS)
- * @NUM_NL80211_KEYTYPES: number of defined key types
- */
- enum nl80211_key_type {
- NL80211_KEYTYPE_GROUP,
- NL80211_KEYTYPE_PAIRWISE,
- NL80211_KEYTYPE_PEERKEY,
- NUM_NL80211_KEYTYPES
- };
- /**
- * enum nl80211_mfp - Management frame protection state
- * @NL80211_MFP_NO: Management frame protection not used
- * @NL80211_MFP_REQUIRED: Management frame protection required
- * @NL80211_MFP_OPTIONAL: Management frame protection is optional
- */
- enum nl80211_mfp {
- NL80211_MFP_NO,
- NL80211_MFP_REQUIRED,
- NL80211_MFP_OPTIONAL,
- };
- enum nl80211_wpa_versions {
- NL80211_WPA_VERSION_1 = 1 << 0,
- NL80211_WPA_VERSION_2 = 1 << 1,
- NL80211_WPA_VERSION_3 = 1 << 2,
- };
- /**
- * enum nl80211_key_default_types - key default types
- * @__NL80211_KEY_DEFAULT_TYPE_INVALID: invalid
- * @NL80211_KEY_DEFAULT_TYPE_UNICAST: key should be used as default
- * unicast key
- * @NL80211_KEY_DEFAULT_TYPE_MULTICAST: key should be used as default
- * multicast key
- * @NUM_NL80211_KEY_DEFAULT_TYPES: number of default types
- */
- enum nl80211_key_default_types {
- __NL80211_KEY_DEFAULT_TYPE_INVALID,
- NL80211_KEY_DEFAULT_TYPE_UNICAST,
- NL80211_KEY_DEFAULT_TYPE_MULTICAST,
- NUM_NL80211_KEY_DEFAULT_TYPES
- };
- /**
- * enum nl80211_key_attributes - key attributes
- * @__NL80211_KEY_INVALID: invalid
- * @NL80211_KEY_DATA: (temporal) key data; for TKIP this consists of
- * 16 bytes encryption key followed by 8 bytes each for TX and RX MIC
- * keys
- * @NL80211_KEY_IDX: key ID (u8, 0-3)
- * @NL80211_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11
- * section 7.3.2.25.1, e.g. 0x000FAC04)
- * @NL80211_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and
- * CCMP keys, each six bytes in little endian
- * @NL80211_KEY_DEFAULT: flag indicating default key
- * @NL80211_KEY_DEFAULT_MGMT: flag indicating default management key
- * @NL80211_KEY_TYPE: the key type from enum nl80211_key_type, if not
- * specified the default depends on whether a MAC address was
- * given with the command using the key or not (u32)
- * @NL80211_KEY_DEFAULT_TYPES: A nested attribute containing flags
- * attributes, specifying what a key should be set as default as.
- * See &enum nl80211_key_default_types.
- * @NL80211_KEY_MODE: the mode from enum nl80211_key_mode.
- * Defaults to @NL80211_KEY_RX_TX.
- * @NL80211_KEY_DEFAULT_BEACON: flag indicating default Beacon frame key
- *
- * @__NL80211_KEY_AFTER_LAST: internal
- * @NL80211_KEY_MAX: highest key attribute
- */
- enum nl80211_key_attributes {
- __NL80211_KEY_INVALID,
- NL80211_KEY_DATA,
- NL80211_KEY_IDX,
- NL80211_KEY_CIPHER,
- NL80211_KEY_SEQ,
- NL80211_KEY_DEFAULT,
- NL80211_KEY_DEFAULT_MGMT,
- NL80211_KEY_TYPE,
- NL80211_KEY_DEFAULT_TYPES,
- NL80211_KEY_MODE,
- NL80211_KEY_DEFAULT_BEACON,
- /* keep last */
- __NL80211_KEY_AFTER_LAST,
- NL80211_KEY_MAX = __NL80211_KEY_AFTER_LAST - 1
- };
- /**
- * enum nl80211_tx_rate_attributes - TX rate set attributes
- * @__NL80211_TXRATE_INVALID: invalid
- * @NL80211_TXRATE_LEGACY: Legacy (non-MCS) rates allowed for TX rate selection
- * in an array of rates as defined in IEEE 802.11 7.3.2.2 (u8 values with
- * 1 = 500 kbps) but without the IE length restriction (at most
- * %NL80211_MAX_SUPP_RATES in a single array).
- * @NL80211_TXRATE_HT: HT (MCS) rates allowed for TX rate selection
- * in an array of MCS numbers.
- * @NL80211_TXRATE_VHT: VHT rates allowed for TX rate selection,
- * see &struct nl80211_txrate_vht
- * @NL80211_TXRATE_GI: configure GI, see &enum nl80211_txrate_gi
- * @NL80211_TXRATE_HE: HE rates allowed for TX rate selection,
- * see &struct nl80211_txrate_he
- * @NL80211_TXRATE_HE_GI: configure HE GI, 0.8us, 1.6us and 3.2us.
- * @NL80211_TXRATE_HE_LTF: configure HE LTF, 1XLTF, 2XLTF and 4XLTF.
- * @__NL80211_TXRATE_AFTER_LAST: internal
- * @NL80211_TXRATE_MAX: highest TX rate attribute
- */
- enum nl80211_tx_rate_attributes {
- __NL80211_TXRATE_INVALID,
- NL80211_TXRATE_LEGACY,
- NL80211_TXRATE_HT,
- NL80211_TXRATE_VHT,
- NL80211_TXRATE_GI,
- NL80211_TXRATE_HE,
- NL80211_TXRATE_HE_GI,
- NL80211_TXRATE_HE_LTF,
- /* keep last */
- __NL80211_TXRATE_AFTER_LAST,
- NL80211_TXRATE_MAX = __NL80211_TXRATE_AFTER_LAST - 1
- };
- #define NL80211_TXRATE_MCS NL80211_TXRATE_HT
- #define NL80211_VHT_NSS_MAX 8
- /**
- * struct nl80211_txrate_vht - VHT MCS/NSS txrate bitmap
- * @mcs: MCS bitmap table for each NSS (array index 0 for 1 stream, etc.)
- */
- struct nl80211_txrate_vht {
- __u16 mcs[NL80211_VHT_NSS_MAX];
- };
- #define NL80211_HE_NSS_MAX 8
- /**
- * struct nl80211_txrate_he - HE MCS/NSS txrate bitmap
- * @mcs: MCS bitmap table for each NSS (array index 0 for 1 stream, etc.)
- */
- struct nl80211_txrate_he {
- __u16 mcs[NL80211_HE_NSS_MAX];
- };
- enum nl80211_txrate_gi {
- NL80211_TXRATE_DEFAULT_GI,
- NL80211_TXRATE_FORCE_SGI,
- NL80211_TXRATE_FORCE_LGI,
- };
- /**
- * enum nl80211_band - Frequency band
- * @NL80211_BAND_2GHZ: 2.4 GHz ISM band
- * @NL80211_BAND_5GHZ: around 5 GHz band (4.9 - 5.7 GHz)
- * @NL80211_BAND_60GHZ: around 60 GHz band (58.32 - 69.12 GHz)
- * @NL80211_BAND_6GHZ: around 6 GHz band (5.9 - 7.2 GHz)
- * @NL80211_BAND_S1GHZ: around 900MHz, supported by S1G PHYs
- * @NUM_NL80211_BANDS: number of bands, avoid using this in userspace
- * since newer kernel versions may support more bands
- */
- enum nl80211_band {
- NL80211_BAND_2GHZ,
- NL80211_BAND_5GHZ,
- NL80211_BAND_60GHZ,
- NL80211_BAND_6GHZ,
- NL80211_BAND_S1GHZ,
- NUM_NL80211_BANDS,
- };
- /**
- * enum nl80211_ps_state - powersave state
- * @NL80211_PS_DISABLED: powersave is disabled
- * @NL80211_PS_ENABLED: powersave is enabled
- */
- enum nl80211_ps_state {
- NL80211_PS_DISABLED,
- NL80211_PS_ENABLED,
- };
- /**
- * enum nl80211_attr_cqm - connection quality monitor attributes
- * @__NL80211_ATTR_CQM_INVALID: invalid
- * @NL80211_ATTR_CQM_RSSI_THOLD: RSSI threshold in dBm. This value specifies
- * the threshold for the RSSI level at which an event will be sent. Zero
- * to disable. Alternatively, if %NL80211_EXT_FEATURE_CQM_RSSI_LIST is
- * set, multiple values can be supplied as a low-to-high sorted array of
- * threshold values in dBm. Events will be sent when the RSSI value
- * crosses any of the thresholds.
- * @NL80211_ATTR_CQM_RSSI_HYST: RSSI hysteresis in dBm. This value specifies
- * the minimum amount the RSSI level must change after an event before a
- * new event may be issued (to reduce effects of RSSI oscillation).
- * @NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT: RSSI threshold event
- * @NL80211_ATTR_CQM_PKT_LOSS_EVENT: a u32 value indicating that this many
- * consecutive packets were not acknowledged by the peer
- * @NL80211_ATTR_CQM_TXE_RATE: TX error rate in %. Minimum % of TX failures
- * during the given %NL80211_ATTR_CQM_TXE_INTVL before an
- * %NL80211_CMD_NOTIFY_CQM with reported %NL80211_ATTR_CQM_TXE_RATE and
- * %NL80211_ATTR_CQM_TXE_PKTS is generated.
- * @NL80211_ATTR_CQM_TXE_PKTS: number of attempted packets in a given
- * %NL80211_ATTR_CQM_TXE_INTVL before %NL80211_ATTR_CQM_TXE_RATE is
- * checked.
- * @NL80211_ATTR_CQM_TXE_INTVL: interval in seconds. Specifies the periodic
- * interval in which %NL80211_ATTR_CQM_TXE_PKTS and
- * %NL80211_ATTR_CQM_TXE_RATE must be satisfied before generating an
- * %NL80211_CMD_NOTIFY_CQM. Set to 0 to turn off TX error reporting.
- * @NL80211_ATTR_CQM_BEACON_LOSS_EVENT: flag attribute that's set in a beacon
- * loss event
- * @NL80211_ATTR_CQM_RSSI_LEVEL: the RSSI value in dBm that triggered the
- * RSSI threshold event.
- * @__NL80211_ATTR_CQM_AFTER_LAST: internal
- * @NL80211_ATTR_CQM_MAX: highest key attribute
- */
- enum nl80211_attr_cqm {
- __NL80211_ATTR_CQM_INVALID,
- NL80211_ATTR_CQM_RSSI_THOLD,
- NL80211_ATTR_CQM_RSSI_HYST,
- NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT,
- NL80211_ATTR_CQM_PKT_LOSS_EVENT,
- NL80211_ATTR_CQM_TXE_RATE,
- NL80211_ATTR_CQM_TXE_PKTS,
- NL80211_ATTR_CQM_TXE_INTVL,
- NL80211_ATTR_CQM_BEACON_LOSS_EVENT,
- NL80211_ATTR_CQM_RSSI_LEVEL,
- /* keep last */
- __NL80211_ATTR_CQM_AFTER_LAST,
- NL80211_ATTR_CQM_MAX = __NL80211_ATTR_CQM_AFTER_LAST - 1
- };
- /**
- * enum nl80211_cqm_rssi_threshold_event - RSSI threshold event
- * @NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW: The RSSI level is lower than the
- * configured threshold
- * @NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH: The RSSI is higher than the
- * configured threshold
- * @NL80211_CQM_RSSI_BEACON_LOSS_EVENT: (reserved, never sent)
- */
- enum nl80211_cqm_rssi_threshold_event {
- NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW,
- NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH,
- NL80211_CQM_RSSI_BEACON_LOSS_EVENT,
- };
- /**
- * enum nl80211_tx_power_setting - TX power adjustment
- * @NL80211_TX_POWER_AUTOMATIC: automatically determine transmit power
- * @NL80211_TX_POWER_LIMITED: limit TX power by the mBm parameter
- * @NL80211_TX_POWER_FIXED: fix TX power to the mBm parameter
- */
- enum nl80211_tx_power_setting {
- NL80211_TX_POWER_AUTOMATIC,
- NL80211_TX_POWER_LIMITED,
- NL80211_TX_POWER_FIXED,
- };
- /**
- * enum nl80211_tid_config - TID config state
- * @NL80211_TID_CONFIG_ENABLE: Enable config for the TID
- * @NL80211_TID_CONFIG_DISABLE: Disable config for the TID
- */
- enum nl80211_tid_config {
- NL80211_TID_CONFIG_ENABLE,
- NL80211_TID_CONFIG_DISABLE,
- };
- /* enum nl80211_tx_rate_setting - TX rate configuration type
- * @NL80211_TX_RATE_AUTOMATIC: automatically determine TX rate
- * @NL80211_TX_RATE_LIMITED: limit the TX rate by the TX rate parameter
- * @NL80211_TX_RATE_FIXED: fix TX rate to the TX rate parameter
- */
- enum nl80211_tx_rate_setting {
- NL80211_TX_RATE_AUTOMATIC,
- NL80211_TX_RATE_LIMITED,
- NL80211_TX_RATE_FIXED,
- };
- /* enum nl80211_tid_config_attr - TID specific configuration.
- * @NL80211_TID_CONFIG_ATTR_PAD: pad attribute for 64-bit values
- * @NL80211_TID_CONFIG_ATTR_VIF_SUPP: a bitmap (u64) of attributes supported
- * for per-vif configuration; doesn't list the ones that are generic
- * (%NL80211_TID_CONFIG_ATTR_TIDS, %NL80211_TID_CONFIG_ATTR_OVERRIDE).
- * @NL80211_TID_CONFIG_ATTR_PEER_SUPP: same as the previous per-vif one, but
- * per peer instead.
- * @NL80211_TID_CONFIG_ATTR_OVERRIDE: flag attribue, if set indicates
- * that the new configuration overrides all previous peer
- * configurations, otherwise previous peer specific configurations
- * should be left untouched.
- * @NL80211_TID_CONFIG_ATTR_TIDS: a bitmask value of TIDs (bit 0 to 7)
- * Its type is u16.
- * @NL80211_TID_CONFIG_ATTR_NOACK: Configure ack policy for the TID.
- * specified in %NL80211_TID_CONFIG_ATTR_TID. see %enum nl80211_tid_config.
- * Its type is u8.
- * @NL80211_TID_CONFIG_ATTR_RETRY_SHORT: Number of retries used with data frame
- * transmission, user-space sets this configuration in
- * &NL80211_CMD_SET_TID_CONFIG. It is u8 type, min value is 1 and
- * the max value is advertised by the driver in this attribute on
- * output in wiphy capabilities.
- * @NL80211_TID_CONFIG_ATTR_RETRY_LONG: Number of retries used with data frame
- * transmission, user-space sets this configuration in
- * &NL80211_CMD_SET_TID_CONFIG. Its type is u8, min value is 1 and
- * the max value is advertised by the driver in this attribute on
- * output in wiphy capabilities.
- * @NL80211_TID_CONFIG_ATTR_AMPDU_CTRL: Enable/Disable MPDU aggregation
- * for the TIDs specified in %NL80211_TID_CONFIG_ATTR_TIDS.
- * Its type is u8, using the values from &nl80211_tid_config.
- * @NL80211_TID_CONFIG_ATTR_RTSCTS_CTRL: Enable/Disable RTS_CTS for the TIDs
- * specified in %NL80211_TID_CONFIG_ATTR_TIDS. It is u8 type, using
- * the values from &nl80211_tid_config.
- * @NL80211_TID_CONFIG_ATTR_AMSDU_CTRL: Enable/Disable MSDU aggregation
- * for the TIDs specified in %NL80211_TID_CONFIG_ATTR_TIDS.
- * Its type is u8, using the values from &nl80211_tid_config.
- * @NL80211_TID_CONFIG_ATTR_TX_RATE_TYPE: This attribute will be useful
- * to notfiy the driver that what type of txrate should be used
- * for the TIDs specified in %NL80211_TID_CONFIG_ATTR_TIDS. using
- * the values form &nl80211_tx_rate_setting.
- * @NL80211_TID_CONFIG_ATTR_TX_RATE: Data frame TX rate mask should be applied
- * with the parameters passed through %NL80211_ATTR_TX_RATES.
- * configuration is applied to the data frame for the tid to that connected
- * station.
- */
- enum nl80211_tid_config_attr {
- __NL80211_TID_CONFIG_ATTR_INVALID,
- NL80211_TID_CONFIG_ATTR_PAD,
- NL80211_TID_CONFIG_ATTR_VIF_SUPP,
- NL80211_TID_CONFIG_ATTR_PEER_SUPP,
- NL80211_TID_CONFIG_ATTR_OVERRIDE,
- NL80211_TID_CONFIG_ATTR_TIDS,
- NL80211_TID_CONFIG_ATTR_NOACK,
- NL80211_TID_CONFIG_ATTR_RETRY_SHORT,
- NL80211_TID_CONFIG_ATTR_RETRY_LONG,
- NL80211_TID_CONFIG_ATTR_AMPDU_CTRL,
- NL80211_TID_CONFIG_ATTR_RTSCTS_CTRL,
- NL80211_TID_CONFIG_ATTR_AMSDU_CTRL,
- NL80211_TID_CONFIG_ATTR_TX_RATE_TYPE,
- NL80211_TID_CONFIG_ATTR_TX_RATE,
- /* keep last */
- __NL80211_TID_CONFIG_ATTR_AFTER_LAST,
- NL80211_TID_CONFIG_ATTR_MAX = __NL80211_TID_CONFIG_ATTR_AFTER_LAST - 1
- };
- /**
- * enum nl80211_packet_pattern_attr - packet pattern attribute
- * @__NL80211_PKTPAT_INVALID: invalid number for nested attribute
- * @NL80211_PKTPAT_PATTERN: the pattern, values where the mask has
- * a zero bit are ignored
- * @NL80211_PKTPAT_MASK: pattern mask, must be long enough to have
- * a bit for each byte in the pattern. The lowest-order bit corresponds
- * to the first byte of the pattern, but the bytes of the pattern are
- * in a little-endian-like format, i.e. the 9th byte of the pattern
- * corresponds to the lowest-order bit in the second byte of the mask.
- * For example: The match 00:xx:00:00:xx:00:00:00:00:xx:xx:xx (where
- * xx indicates "don't care") would be represented by a pattern of
- * twelve zero bytes, and a mask of "0xed,0x01".
- * Note that the pattern matching is done as though frames were not
- * 802.11 frames but 802.3 frames, i.e. the frame is fully unpacked
- * first (including SNAP header unpacking) and then matched.
- * @NL80211_PKTPAT_OFFSET: packet offset, pattern is matched after
- * these fixed number of bytes of received packet
- * @NUM_NL80211_PKTPAT: number of attributes
- * @MAX_NL80211_PKTPAT: max attribute number
- */
- enum nl80211_packet_pattern_attr {
- __NL80211_PKTPAT_INVALID,
- NL80211_PKTPAT_MASK,
- NL80211_PKTPAT_PATTERN,
- NL80211_PKTPAT_OFFSET,
- NUM_NL80211_PKTPAT,
- MAX_NL80211_PKTPAT = NUM_NL80211_PKTPAT - 1,
- };
- /**
- * struct nl80211_pattern_support - packet pattern support information
- * @max_patterns: maximum number of patterns supported
- * @min_pattern_len: minimum length of each pattern
- * @max_pattern_len: maximum length of each pattern
- * @max_pkt_offset: maximum Rx packet offset
- *
- * This struct is carried in %NL80211_WOWLAN_TRIG_PKT_PATTERN when
- * that is part of %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED or in
- * %NL80211_ATTR_COALESCE_RULE_PKT_PATTERN when that is part of
- * %NL80211_ATTR_COALESCE_RULE in the capability information given
- * by the kernel to userspace.
- */
- struct nl80211_pattern_support {
- __u32 max_patterns;
- __u32 min_pattern_len;
- __u32 max_pattern_len;
- __u32 max_pkt_offset;
- } __attribute__((packed));
- /* only for backward compatibility */
- #define __NL80211_WOWLAN_PKTPAT_INVALID __NL80211_PKTPAT_INVALID
- #define NL80211_WOWLAN_PKTPAT_MASK NL80211_PKTPAT_MASK
- #define NL80211_WOWLAN_PKTPAT_PATTERN NL80211_PKTPAT_PATTERN
- #define NL80211_WOWLAN_PKTPAT_OFFSET NL80211_PKTPAT_OFFSET
- #define NUM_NL80211_WOWLAN_PKTPAT NUM_NL80211_PKTPAT
- #define MAX_NL80211_WOWLAN_PKTPAT MAX_NL80211_PKTPAT
- #define nl80211_wowlan_pattern_support nl80211_pattern_support
- /**
- * enum nl80211_wowlan_triggers - WoWLAN trigger definitions
- * @__NL80211_WOWLAN_TRIG_INVALID: invalid number for nested attributes
- * @NL80211_WOWLAN_TRIG_ANY: wake up on any activity, do not really put
- * the chip into a special state -- works best with chips that have
- * support for low-power operation already (flag)
- * Note that this mode is incompatible with all of the others, if
- * any others are even supported by the device.
- * @NL80211_WOWLAN_TRIG_DISCONNECT: wake up on disconnect, the way disconnect
- * is detected is implementation-specific (flag)
- * @NL80211_WOWLAN_TRIG_MAGIC_PKT: wake up on magic packet (6x 0xff, followed
- * by 16 repetitions of MAC addr, anywhere in payload) (flag)
- * @NL80211_WOWLAN_TRIG_PKT_PATTERN: wake up on the specified packet patterns
- * which are passed in an array of nested attributes, each nested attribute
- * defining a with attributes from &struct nl80211_wowlan_trig_pkt_pattern.
- * Each pattern defines a wakeup packet. Packet offset is associated with
- * each pattern which is used while matching the pattern. The matching is
- * done on the MSDU, i.e. as though the packet was an 802.3 packet, so the
- * pattern matching is done after the packet is converted to the MSDU.
- *
- * In %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, it is a binary attribute
- * carrying a &struct nl80211_pattern_support.
- *
- * When reporting wakeup. it is a u32 attribute containing the 0-based
- * index of the pattern that caused the wakeup, in the patterns passed
- * to the kernel when configuring.
- * @NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED: Not a real trigger, and cannot be
- * used when setting, used only to indicate that GTK rekeying is supported
- * by the device (flag)
- * @NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE: wake up on GTK rekey failure (if
- * done by the device) (flag)
- * @NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST: wake up on EAP Identity Request
- * packet (flag)
- * @NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE: wake up on 4-way handshake (flag)
- * @NL80211_WOWLAN_TRIG_RFKILL_RELEASE: wake up when rfkill is released
- * (on devices that have rfkill in the device) (flag)
- * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211: For wakeup reporting only, contains
- * the 802.11 packet that caused the wakeup, e.g. a deauth frame. The frame
- * may be truncated, the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN
- * attribute contains the original length.
- * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN: Original length of the 802.11
- * packet, may be bigger than the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211
- * attribute if the packet was truncated somewhere.
- * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023: For wakeup reporting only, contains the
- * 802.11 packet that caused the wakeup, e.g. a magic packet. The frame may
- * be truncated, the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN attribute
- * contains the original length.
- * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN: Original length of the 802.3
- * packet, may be bigger than the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023
- * attribute if the packet was truncated somewhere.
- * @NL80211_WOWLAN_TRIG_TCP_CONNECTION: TCP connection wake, see DOC section
- * "TCP connection wakeup" for more details. This is a nested attribute
- * containing the exact information for establishing and keeping alive
- * the TCP connection.
- * @NL80211_WOWLAN_TRIG_TCP_WAKEUP_MATCH: For wakeup reporting only, the
- * wakeup packet was received on the TCP connection
- * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST: For wakeup reporting only, the
- * TCP connection was lost or failed to be established
- * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS: For wakeup reporting only,
- * the TCP connection ran out of tokens to use for data to send to the
- * service
- * @NL80211_WOWLAN_TRIG_NET_DETECT: wake up when a configured network
- * is detected. This is a nested attribute that contains the
- * same attributes used with @NL80211_CMD_START_SCHED_SCAN. It
- * specifies how the scan is performed (e.g. the interval, the
- * channels to scan and the initial delay) as well as the scan
- * results that will trigger a wake (i.e. the matchsets). This
- * attribute is also sent in a response to
- * @NL80211_CMD_GET_WIPHY, indicating the number of match sets
- * supported by the driver (u32).
- * @NL80211_WOWLAN_TRIG_NET_DETECT_RESULTS: nested attribute
- * containing an array with information about what triggered the
- * wake up. If no elements are present in the array, it means
- * that the information is not available. If more than one
- * element is present, it means that more than one match
- * occurred.
- * Each element in the array is a nested attribute that contains
- * one optional %NL80211_ATTR_SSID attribute and one optional
- * %NL80211_ATTR_SCAN_FREQUENCIES attribute. At least one of
- * these attributes must be present. If
- * %NL80211_ATTR_SCAN_FREQUENCIES contains more than one
- * frequency, it means that the match occurred in more than one
- * channel.
- * @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers
- * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number
- *
- * These nested attributes are used to configure the wakeup triggers and
- * to report the wakeup reason(s).
- */
- enum nl80211_wowlan_triggers {
- __NL80211_WOWLAN_TRIG_INVALID,
- NL80211_WOWLAN_TRIG_ANY,
- NL80211_WOWLAN_TRIG_DISCONNECT,
- NL80211_WOWLAN_TRIG_MAGIC_PKT,
- NL80211_WOWLAN_TRIG_PKT_PATTERN,
- NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED,
- NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE,
- NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST,
- NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE,
- NL80211_WOWLAN_TRIG_RFKILL_RELEASE,
- NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211,
- NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN,
- NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023,
- NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN,
- NL80211_WOWLAN_TRIG_TCP_CONNECTION,
- NL80211_WOWLAN_TRIG_WAKEUP_TCP_MATCH,
- NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST,
- NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS,
- NL80211_WOWLAN_TRIG_NET_DETECT,
- NL80211_WOWLAN_TRIG_NET_DETECT_RESULTS,
- /* keep last */
- NUM_NL80211_WOWLAN_TRIG,
- MAX_NL80211_WOWLAN_TRIG = NUM_NL80211_WOWLAN_TRIG - 1
- };
- /**
- * DOC: TCP connection wakeup
- *
- * Some devices can establish a TCP connection in order to be woken up by a
- * packet coming in from outside their network segment, or behind NAT. If
- * configured, the device will establish a TCP connection to the given
- * service, and periodically send data to that service. The first data
- * packet is usually transmitted after SYN/ACK, also ACKing the SYN/ACK.
- * The data packets can optionally include a (little endian) sequence
- * number (in the TCP payload!) that is generated by the device, and, also
- * optionally, a token from a list of tokens. This serves as a keep-alive
- * with the service, and for NATed connections, etc.
- *
- * During this keep-alive period, the server doesn't send any data to the
- * client. When receiving data, it is compared against the wakeup pattern
- * (and mask) and if it matches, the host is woken up. Similarly, if the
- * connection breaks or cannot be established to start with, the host is
- * also woken up.
- *
- * Developer's note: ARP offload is required for this, otherwise TCP
- * response packets might not go through correctly.
- */
- /**
- * struct nl80211_wowlan_tcp_data_seq - WoWLAN TCP data sequence
- * @start: starting value
- * @offset: offset of sequence number in packet
- * @len: length of the sequence value to write, 1 through 4
- *
- * Note: don't confuse with the TCP sequence number(s), this is for the
- * keepalive packet payload. The actual value is written into the packet
- * in little endian.
- */
- struct nl80211_wowlan_tcp_data_seq {
- __u32 start, offset, len;
- };
- /**
- * struct nl80211_wowlan_tcp_data_token - WoWLAN TCP data token config
- * @offset: offset of token in packet
- * @len: length of each token
- * @token_stream: stream of data to be used for the tokens, the length must
- * be a multiple of @len for this to make sense
- */
- struct nl80211_wowlan_tcp_data_token {
- __u32 offset, len;
- __u8 token_stream[];
- };
- /**
- * struct nl80211_wowlan_tcp_data_token_feature - data token features
- * @min_len: minimum token length
- * @max_len: maximum token length
- * @bufsize: total available token buffer size (max size of @token_stream)
- */
- struct nl80211_wowlan_tcp_data_token_feature {
- __u32 min_len, max_len, bufsize;
- };
- /**
- * enum nl80211_wowlan_tcp_attrs - WoWLAN TCP connection parameters
- * @__NL80211_WOWLAN_TCP_INVALID: invalid number for nested attributes
- * @NL80211_WOWLAN_TCP_SRC_IPV4: source IPv4 address (in network byte order)
- * @NL80211_WOWLAN_TCP_DST_IPV4: destination IPv4 address
- * (in network byte order)
- * @NL80211_WOWLAN_TCP_DST_MAC: destination MAC address, this is given because
- * route lookup when configured might be invalid by the time we suspend,
- * and doing a route lookup when suspending is no longer possible as it
- * might require ARP querying.
- * @NL80211_WOWLAN_TCP_SRC_PORT: source port (u16); optional, if not given a
- * socket and port will be allocated
- * @NL80211_WOWLAN_TCP_DST_PORT: destination port (u16)
- * @NL80211_WOWLAN_TCP_DATA_PAYLOAD: data packet payload, at least one byte.
- * For feature advertising, a u32 attribute holding the maximum length
- * of the data payload.
- * @NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ: data packet sequence configuration
- * (if desired), a &struct nl80211_wowlan_tcp_data_seq. For feature
- * advertising it is just a flag
- * @NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN: data packet token configuration,
- * see &struct nl80211_wowlan_tcp_data_token and for advertising see
- * &struct nl80211_wowlan_tcp_data_token_feature.
- * @NL80211_WOWLAN_TCP_DATA_INTERVAL: data interval in seconds, maximum
- * interval in feature advertising (u32)
- * @NL80211_WOWLAN_TCP_WAKE_PAYLOAD: wake packet payload, for advertising a
- * u32 attribute holding the maximum length
- * @NL80211_WOWLAN_TCP_WAKE_MASK: Wake packet payload mask, not used for
- * feature advertising. The mask works like @NL80211_PKTPAT_MASK
- * but on the TCP payload only.
- * @NUM_NL80211_WOWLAN_TCP: number of TCP attributes
- * @MAX_NL80211_WOWLAN_TCP: highest attribute number
- */
- enum nl80211_wowlan_tcp_attrs {
- __NL80211_WOWLAN_TCP_INVALID,
- NL80211_WOWLAN_TCP_SRC_IPV4,
- NL80211_WOWLAN_TCP_DST_IPV4,
- NL80211_WOWLAN_TCP_DST_MAC,
- NL80211_WOWLAN_TCP_SRC_PORT,
- NL80211_WOWLAN_TCP_DST_PORT,
- NL80211_WOWLAN_TCP_DATA_PAYLOAD,
- NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ,
- NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN,
- NL80211_WOWLAN_TCP_DATA_INTERVAL,
- NL80211_WOWLAN_TCP_WAKE_PAYLOAD,
- NL80211_WOWLAN_TCP_WAKE_MASK,
- /* keep last */
- NUM_NL80211_WOWLAN_TCP,
- MAX_NL80211_WOWLAN_TCP = NUM_NL80211_WOWLAN_TCP - 1
- };
- /**
- * struct nl80211_coalesce_rule_support - coalesce rule support information
- * @max_rules: maximum number of rules supported
- * @pat: packet pattern support information
- * @max_delay: maximum supported coalescing delay in msecs
- *
- * This struct is carried in %NL80211_ATTR_COALESCE_RULE in the
- * capability information given by the kernel to userspace.
- */
- struct nl80211_coalesce_rule_support {
- __u32 max_rules;
- struct nl80211_pattern_support pat;
- __u32 max_delay;
- } __attribute__((packed));
- /**
- * enum nl80211_attr_coalesce_rule - coalesce rule attribute
- * @__NL80211_COALESCE_RULE_INVALID: invalid number for nested attribute
- * @NL80211_ATTR_COALESCE_RULE_DELAY: delay in msecs used for packet coalescing
- * @NL80211_ATTR_COALESCE_RULE_CONDITION: condition for packet coalescence,
- * see &enum nl80211_coalesce_condition.
- * @NL80211_ATTR_COALESCE_RULE_PKT_PATTERN: packet offset, pattern is matched
- * after these fixed number of bytes of received packet
- * @NUM_NL80211_ATTR_COALESCE_RULE: number of attributes
- * @NL80211_ATTR_COALESCE_RULE_MAX: max attribute number
- */
- enum nl80211_attr_coalesce_rule {
- __NL80211_COALESCE_RULE_INVALID,
- NL80211_ATTR_COALESCE_RULE_DELAY,
- NL80211_ATTR_COALESCE_RULE_CONDITION,
- NL80211_ATTR_COALESCE_RULE_PKT_PATTERN,
- /* keep last */
- NUM_NL80211_ATTR_COALESCE_RULE,
- NL80211_ATTR_COALESCE_RULE_MAX = NUM_NL80211_ATTR_COALESCE_RULE - 1
- };
- /**
- * enum nl80211_coalesce_condition - coalesce rule conditions
- * @NL80211_COALESCE_CONDITION_MATCH: coalaesce Rx packets when patterns
- * in a rule are matched.
- * @NL80211_COALESCE_CONDITION_NO_MATCH: coalesce Rx packets when patterns
- * in a rule are not matched.
- */
- enum nl80211_coalesce_condition {
- NL80211_COALESCE_CONDITION_MATCH,
- NL80211_COALESCE_CONDITION_NO_MATCH
- };
- /**
- * enum nl80211_iface_limit_attrs - limit attributes
- * @NL80211_IFACE_LIMIT_UNSPEC: (reserved)
- * @NL80211_IFACE_LIMIT_MAX: maximum number of interfaces that
- * can be chosen from this set of interface types (u32)
- * @NL80211_IFACE_LIMIT_TYPES: nested attribute containing a
- * flag attribute for each interface type in this set
- * @NUM_NL80211_IFACE_LIMIT: number of attributes
- * @MAX_NL80211_IFACE_LIMIT: highest attribute number
- */
- enum nl80211_iface_limit_attrs {
- NL80211_IFACE_LIMIT_UNSPEC,
- NL80211_IFACE_LIMIT_MAX,
- NL80211_IFACE_LIMIT_TYPES,
- /* keep last */
- NUM_NL80211_IFACE_LIMIT,
- MAX_NL80211_IFACE_LIMIT = NUM_NL80211_IFACE_LIMIT - 1
- };
- /**
- * enum nl80211_if_combination_attrs -- interface combination attributes
- *
- * @NL80211_IFACE_COMB_UNSPEC: (reserved)
- * @NL80211_IFACE_COMB_LIMITS: Nested attributes containing the limits
- * for given interface types, see &enum nl80211_iface_limit_attrs.
- * @NL80211_IFACE_COMB_MAXNUM: u32 attribute giving the total number of
- * interfaces that can be created in this group. This number doesn't
- * apply to interfaces purely managed in software, which are listed
- * in a separate attribute %NL80211_ATTR_INTERFACES_SOFTWARE.
- * @NL80211_IFACE_COMB_STA_AP_BI_MATCH: flag attribute specifying that
- * beacon intervals within this group must be all the same even for
- * infrastructure and AP/GO combinations, i.e. the GO(s) must adopt
- * the infrastructure network's beacon interval.
- * @NL80211_IFACE_COMB_NUM_CHANNELS: u32 attribute specifying how many
- * different channels may be used within this group.
- * @NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS: u32 attribute containing the bitmap
- * of supported channel widths for radar detection.
- * @NL80211_IFACE_COMB_RADAR_DETECT_REGIONS: u32 attribute containing the bitmap
- * of supported regulatory regions for radar detection.
- * @NL80211_IFACE_COMB_BI_MIN_GCD: u32 attribute specifying the minimum GCD of
- * different beacon intervals supported by all the interface combinations
- * in this group (if not present, all beacon intervals be identical).
- * @NUM_NL80211_IFACE_COMB: number of attributes
- * @MAX_NL80211_IFACE_COMB: highest attribute number
- *
- * Examples:
- * limits = [ #{STA} <= 1, #{AP} <= 1 ], matching BI, channels = 1, max = 2
- * => allows an AP and a STA that must match BIs
- *
- * numbers = [ #{AP, P2P-GO} <= 8 ], BI min gcd, channels = 1, max = 8,
- * => allows 8 of AP/GO that can have BI gcd >= min gcd
- *
- * numbers = [ #{STA} <= 2 ], channels = 2, max = 2
- * => allows two STAs on different channels
- *
- * numbers = [ #{STA} <= 1, #{P2P-client,P2P-GO} <= 3 ], max = 4
- * => allows a STA plus three P2P interfaces
- *
- * The list of these four possibilities could completely be contained
- * within the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute to indicate
- * that any of these groups must match.
- *
- * "Combinations" of just a single interface will not be listed here,
- * a single interface of any valid interface type is assumed to always
- * be possible by itself. This means that implicitly, for each valid
- * interface type, the following group always exists:
- * numbers = [ #{<type>} <= 1 ], channels = 1, max = 1
- */
- enum nl80211_if_combination_attrs {
- NL80211_IFACE_COMB_UNSPEC,
- NL80211_IFACE_COMB_LIMITS,
- NL80211_IFACE_COMB_MAXNUM,
- NL80211_IFACE_COMB_STA_AP_BI_MATCH,
- NL80211_IFACE_COMB_NUM_CHANNELS,
- NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS,
- NL80211_IFACE_COMB_RADAR_DETECT_REGIONS,
- NL80211_IFACE_COMB_BI_MIN_GCD,
- /* keep last */
- NUM_NL80211_IFACE_COMB,
- MAX_NL80211_IFACE_COMB = NUM_NL80211_IFACE_COMB - 1
- };
- /**
- * enum nl80211_plink_state - state of a mesh peer link finite state machine
- *
- * @NL80211_PLINK_LISTEN: initial state, considered the implicit
- * state of non existent mesh peer links
- * @NL80211_PLINK_OPN_SNT: mesh plink open frame has been sent to
- * this mesh peer
- * @NL80211_PLINK_OPN_RCVD: mesh plink open frame has been received
- * from this mesh peer
- * @NL80211_PLINK_CNF_RCVD: mesh plink confirm frame has been
- * received from this mesh peer
- * @NL80211_PLINK_ESTAB: mesh peer link is established
- * @NL80211_PLINK_HOLDING: mesh peer link is being closed or cancelled
- * @NL80211_PLINK_BLOCKED: all frames transmitted from this mesh
- * plink are discarded
- * @NUM_NL80211_PLINK_STATES: number of peer link states
- * @MAX_NL80211_PLINK_STATES: highest numerical value of plink states
- */
- enum nl80211_plink_state {
- NL80211_PLINK_LISTEN,
- NL80211_PLINK_OPN_SNT,
- NL80211_PLINK_OPN_RCVD,
- NL80211_PLINK_CNF_RCVD,
- NL80211_PLINK_ESTAB,
- NL80211_PLINK_HOLDING,
- NL80211_PLINK_BLOCKED,
- /* keep last */
- NUM_NL80211_PLINK_STATES,
- MAX_NL80211_PLINK_STATES = NUM_NL80211_PLINK_STATES - 1
- };
- /**
- * enum nl80211_plink_action - actions to perform in mesh peers
- *
- * @NL80211_PLINK_ACTION_NO_ACTION: perform no action
- * @NL80211_PLINK_ACTION_OPEN: start mesh peer link establishment
- * @NL80211_PLINK_ACTION_BLOCK: block traffic from this mesh peer
- * @NUM_NL80211_PLINK_ACTIONS: number of possible actions
- */
- enum plink_actions {
- NL80211_PLINK_ACTION_NO_ACTION,
- NL80211_PLINK_ACTION_OPEN,
- NL80211_PLINK_ACTION_BLOCK,
- NUM_NL80211_PLINK_ACTIONS,
- };
- #define NL80211_KCK_LEN 16
- #define NL80211_KEK_LEN 16
- #define NL80211_KCK_EXT_LEN 24
- #define NL80211_KEK_EXT_LEN 32
- #define NL80211_REPLAY_CTR_LEN 8
- /**
- * enum nl80211_rekey_data - attributes for GTK rekey offload
- * @__NL80211_REKEY_DATA_INVALID: invalid number for nested attributes
- * @NL80211_REKEY_DATA_KEK: key encryption key (binary)
- * @NL80211_REKEY_DATA_KCK: key confirmation key (binary)
- * @NL80211_REKEY_DATA_REPLAY_CTR: replay counter (binary)
- * @NL80211_REKEY_DATA_AKM: AKM data (OUI, suite type)
- * @NUM_NL80211_REKEY_DATA: number of rekey attributes (internal)
- * @MAX_NL80211_REKEY_DATA: highest rekey attribute (internal)
- */
- enum nl80211_rekey_data {
- __NL80211_REKEY_DATA_INVALID,
- NL80211_REKEY_DATA_KEK,
- NL80211_REKEY_DATA_KCK,
- NL80211_REKEY_DATA_REPLAY_CTR,
- NL80211_REKEY_DATA_AKM,
- /* keep last */
- NUM_NL80211_REKEY_DATA,
- MAX_NL80211_REKEY_DATA = NUM_NL80211_REKEY_DATA - 1
- };
- /**
- * enum nl80211_hidden_ssid - values for %NL80211_ATTR_HIDDEN_SSID
- * @NL80211_HIDDEN_SSID_NOT_IN_USE: do not hide SSID (i.e., broadcast it in
- * Beacon frames)
- * @NL80211_HIDDEN_SSID_ZERO_LEN: hide SSID by using zero-length SSID element
- * in Beacon frames
- * @NL80211_HIDDEN_SSID_ZERO_CONTENTS: hide SSID by using correct length of SSID
- * element in Beacon frames but zero out each byte in the SSID
- */
- enum nl80211_hidden_ssid {
- NL80211_HIDDEN_SSID_NOT_IN_USE,
- NL80211_HIDDEN_SSID_ZERO_LEN,
- NL80211_HIDDEN_SSID_ZERO_CONTENTS
- };
- /**
- * enum nl80211_sta_wme_attr - station WME attributes
- * @__NL80211_STA_WME_INVALID: invalid number for nested attribute
- * @NL80211_STA_WME_UAPSD_QUEUES: bitmap of uapsd queues. the format
- * is the same as the AC bitmap in the QoS info field.
- * @NL80211_STA_WME_MAX_SP: max service period. the format is the same
- * as the MAX_SP field in the QoS info field (but already shifted down).
- * @__NL80211_STA_WME_AFTER_LAST: internal
- * @NL80211_STA_WME_MAX: highest station WME attribute
- */
- enum nl80211_sta_wme_attr {
- __NL80211_STA_WME_INVALID,
- NL80211_STA_WME_UAPSD_QUEUES,
- NL80211_STA_WME_MAX_SP,
- /* keep last */
- __NL80211_STA_WME_AFTER_LAST,
- NL80211_STA_WME_MAX = __NL80211_STA_WME_AFTER_LAST - 1
- };
- /**
- * enum nl80211_pmksa_candidate_attr - attributes for PMKSA caching candidates
- * @__NL80211_PMKSA_CANDIDATE_INVALID: invalid number for nested attributes
- * @NL80211_PMKSA_CANDIDATE_INDEX: candidate index (u32; the smaller, the higher
- * priority)
- * @NL80211_PMKSA_CANDIDATE_BSSID: candidate BSSID (6 octets)
- * @NL80211_PMKSA_CANDIDATE_PREAUTH: RSN pre-authentication supported (flag)
- * @NUM_NL80211_PMKSA_CANDIDATE: number of PMKSA caching candidate attributes
- * (internal)
- * @MAX_NL80211_PMKSA_CANDIDATE: highest PMKSA caching candidate attribute
- * (internal)
- */
- enum nl80211_pmksa_candidate_attr {
- __NL80211_PMKSA_CANDIDATE_INVALID,
- NL80211_PMKSA_CANDIDATE_INDEX,
- NL80211_PMKSA_CANDIDATE_BSSID,
- NL80211_PMKSA_CANDIDATE_PREAUTH,
- /* keep last */
- NUM_NL80211_PMKSA_CANDIDATE,
- MAX_NL80211_PMKSA_CANDIDATE = NUM_NL80211_PMKSA_CANDIDATE - 1
- };
- /**
- * enum nl80211_tdls_operation - values for %NL80211_ATTR_TDLS_OPERATION
- * @NL80211_TDLS_DISCOVERY_REQ: Send a TDLS discovery request
- * @NL80211_TDLS_SETUP: Setup TDLS link
- * @NL80211_TDLS_TEARDOWN: Teardown a TDLS link which is already established
- * @NL80211_TDLS_ENABLE_LINK: Enable TDLS link
- * @NL80211_TDLS_DISABLE_LINK: Disable TDLS link
- */
- enum nl80211_tdls_operation {
- NL80211_TDLS_DISCOVERY_REQ,
- NL80211_TDLS_SETUP,
- NL80211_TDLS_TEARDOWN,
- NL80211_TDLS_ENABLE_LINK,
- NL80211_TDLS_DISABLE_LINK,
- };
- /*
- * enum nl80211_ap_sme_features - device-integrated AP features
- * Reserved for future use, no bits are defined in
- * NL80211_ATTR_DEVICE_AP_SME yet.
- enum nl80211_ap_sme_features {
- };
- */
- /**
- * enum nl80211_feature_flags - device/driver features
- * @NL80211_FEATURE_SK_TX_STATUS: This driver supports reflecting back
- * TX status to the socket error queue when requested with the
- * socket option.
- * @NL80211_FEATURE_HT_IBSS: This driver supports IBSS with HT datarates.
- * @NL80211_FEATURE_INACTIVITY_TIMER: This driver takes care of freeing up
- * the connected inactive stations in AP mode.
- * @NL80211_FEATURE_CELL_BASE_REG_HINTS: This driver has been tested
- * to work properly to suppport receiving regulatory hints from
- * cellular base stations.
- * @NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL: (no longer available, only
- * here to reserve the value for API/ABI compatibility)
- * @NL80211_FEATURE_SAE: This driver supports simultaneous authentication of
- * equals (SAE) with user space SME (NL80211_CMD_AUTHENTICATE) in station
- * mode
- * @NL80211_FEATURE_LOW_PRIORITY_SCAN: This driver supports low priority scan
- * @NL80211_FEATURE_SCAN_FLUSH: Scan flush is supported
- * @NL80211_FEATURE_AP_SCAN: Support scanning using an AP vif
- * @NL80211_FEATURE_VIF_TXPOWER: The driver supports per-vif TX power setting
- * @NL80211_FEATURE_NEED_OBSS_SCAN: The driver expects userspace to perform
- * OBSS scans and generate 20/40 BSS coex reports. This flag is used only
- * for drivers implementing the CONNECT API, for AUTH/ASSOC it is implied.
- * @NL80211_FEATURE_P2P_GO_CTWIN: P2P GO implementation supports CT Window
- * setting
- * @NL80211_FEATURE_P2P_GO_OPPPS: P2P GO implementation supports opportunistic
- * powersave
- * @NL80211_FEATURE_FULL_AP_CLIENT_STATE: The driver supports full state
- * transitions for AP clients. Without this flag (and if the driver
- * doesn't have the AP SME in the device) the driver supports adding
- * stations only when they're associated and adds them in associated
- * state (to later be transitioned into authorized), with this flag
- * they should be added before even sending the authentication reply
- * and then transitioned into authenticated, associated and authorized
- * states using station flags.
- * Note that even for drivers that support this, the default is to add
- * stations in authenticated/associated state, so to add unauthenticated
- * stations the authenticated/associated bits have to be set in the mask.
- * @NL80211_FEATURE_ADVERTISE_CHAN_LIMITS: cfg80211 advertises channel limits
- * (HT40, VHT 80/160 MHz) if this flag is set
- * @NL80211_FEATURE_USERSPACE_MPM: This driver supports a userspace Mesh
- * Peering Management entity which may be implemented by registering for
- * beacons or NL80211_CMD_NEW_PEER_CANDIDATE events. The mesh beacon is
- * still generated by the driver.
- * @NL80211_FEATURE_ACTIVE_MONITOR: This driver supports an active monitor
- * interface. An active monitor interface behaves like a normal monitor
- * interface, but gets added to the driver. It ensures that incoming
- * unicast packets directed at the configured interface address get ACKed.
- * @NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE: This driver supports dynamic
- * channel bandwidth change (e.g., HT 20 <-> 40 MHz channel) during the
- * lifetime of a BSS.
- * @NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES: This device adds a DS Parameter
- * Set IE to probe requests.
- * @NL80211_FEATURE_WFA_TPC_IE_IN_PROBES: This device adds a WFA TPC Report IE
- * to probe requests.
- * @NL80211_FEATURE_QUIET: This device, in client mode, supports Quiet Period
- * requests sent to it by an AP.
- * @NL80211_FEATURE_TX_POWER_INSERTION: This device is capable of inserting the
- * current tx power value into the TPC Report IE in the spectrum
- * management TPC Report action frame, and in the Radio Measurement Link
- * Measurement Report action frame.
- * @NL80211_FEATURE_ACKTO_ESTIMATION: This driver supports dynamic ACK timeout
- * estimation (dynack). %NL80211_ATTR_WIPHY_DYN_ACK flag attribute is used
- * to enable dynack.
- * @NL80211_FEATURE_STATIC_SMPS: Device supports static spatial
- * multiplexing powersave, ie. can turn off all but one chain
- * even on HT connections that should be using more chains.
- * @NL80211_FEATURE_DYNAMIC_SMPS: Device supports dynamic spatial
- * multiplexing powersave, ie. can turn off all but one chain
- * and then wake the rest up as required after, for example,
- * rts/cts handshake.
- * @NL80211_FEATURE_SUPPORTS_WMM_ADMISSION: the device supports setting up WMM
- * TSPEC sessions (TID aka TSID 0-7) with the %NL80211_CMD_ADD_TX_TS
- * command. Standard IEEE 802.11 TSPEC setup is not yet supported, it
- * needs to be able to handle Block-Ack agreements and other things.
- * @NL80211_FEATURE_MAC_ON_CREATE: Device supports configuring
- * the vif's MAC address upon creation.
- * See 'macaddr' field in the vif_params (cfg80211.h).
- * @NL80211_FEATURE_TDLS_CHANNEL_SWITCH: Driver supports channel switching when
- * operating as a TDLS peer.
- * @NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR: This device/driver supports using a
- * random MAC address during scan (if the device is unassociated); the
- * %NL80211_SCAN_FLAG_RANDOM_ADDR flag may be set for scans and the MAC
- * address mask/value will be used.
- * @NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR: This device/driver supports
- * using a random MAC address for every scan iteration during scheduled
- * scan (while not associated), the %NL80211_SCAN_FLAG_RANDOM_ADDR may
- * be set for scheduled scan and the MAC address mask/value will be used.
- * @NL80211_FEATURE_ND_RANDOM_MAC_ADDR: This device/driver supports using a
- * random MAC address for every scan iteration during "net detect", i.e.
- * scan in unassociated WoWLAN, the %NL80211_SCAN_FLAG_RANDOM_ADDR may
- * be set for scheduled scan and the MAC address mask/value will be used.
- */
- enum nl80211_feature_flags {
- NL80211_FEATURE_SK_TX_STATUS = 1 << 0,
- NL80211_FEATURE_HT_IBSS = 1 << 1,
- NL80211_FEATURE_INACTIVITY_TIMER = 1 << 2,
- NL80211_FEATURE_CELL_BASE_REG_HINTS = 1 << 3,
- NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL = 1 << 4,
- NL80211_FEATURE_SAE = 1 << 5,
- NL80211_FEATURE_LOW_PRIORITY_SCAN = 1 << 6,
- NL80211_FEATURE_SCAN_FLUSH = 1 << 7,
- NL80211_FEATURE_AP_SCAN = 1 << 8,
- NL80211_FEATURE_VIF_TXPOWER = 1 << 9,
- NL80211_FEATURE_NEED_OBSS_SCAN = 1 << 10,
- NL80211_FEATURE_P2P_GO_CTWIN = 1 << 11,
- NL80211_FEATURE_P2P_GO_OPPPS = 1 << 12,
- /* bit 13 is reserved */
- NL80211_FEATURE_ADVERTISE_CHAN_LIMITS = 1 << 14,
- NL80211_FEATURE_FULL_AP_CLIENT_STATE = 1 << 15,
- NL80211_FEATURE_USERSPACE_MPM = 1 << 16,
- NL80211_FEATURE_ACTIVE_MONITOR = 1 << 17,
- NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE = 1 << 18,
- NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES = 1 << 19,
- NL80211_FEATURE_WFA_TPC_IE_IN_PROBES = 1 << 20,
- NL80211_FEATURE_QUIET = 1 << 21,
- NL80211_FEATURE_TX_POWER_INSERTION = 1 << 22,
- NL80211_FEATURE_ACKTO_ESTIMATION = 1 << 23,
- NL80211_FEATURE_STATIC_SMPS = 1 << 24,
- NL80211_FEATURE_DYNAMIC_SMPS = 1 << 25,
- NL80211_FEATURE_SUPPORTS_WMM_ADMISSION = 1 << 26,
- NL80211_FEATURE_MAC_ON_CREATE = 1 << 27,
- NL80211_FEATURE_TDLS_CHANNEL_SWITCH = 1 << 28,
- NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR = 1 << 29,
- NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR = 1 << 30,
- NL80211_FEATURE_ND_RANDOM_MAC_ADDR = 1U << 31,
- };
- /**
- * enum nl80211_ext_feature_index - bit index of extended features.
- * @NL80211_EXT_FEATURE_VHT_IBSS: This driver supports IBSS with VHT datarates.
- * @NL80211_EXT_FEATURE_RRM: This driver supports RRM. When featured, user can
- * request to use RRM (see %NL80211_ATTR_USE_RRM) with
- * %NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests, which will set
- * the ASSOC_REQ_USE_RRM flag in the association request even if
- * NL80211_FEATURE_QUIET is not advertized.
- * @NL80211_EXT_FEATURE_MU_MIMO_AIR_SNIFFER: This device supports MU-MIMO air
- * sniffer which means that it can be configured to hear packets from
- * certain groups which can be configured by the
- * %NL80211_ATTR_MU_MIMO_GROUP_DATA attribute,
- * or can be configured to follow a station by configuring the
- * %NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR attribute.
- * @NL80211_EXT_FEATURE_SCAN_START_TIME: This driver includes the actual
- * time the scan started in scan results event. The time is the TSF of
- * the BSS that the interface that requested the scan is connected to
- * (if available).
- * @NL80211_EXT_FEATURE_BSS_PARENT_TSF: Per BSS, this driver reports the
- * time the last beacon/probe was received. The time is the TSF of the
- * BSS that the interface that requested the scan is connected to
- * (if available).
- * @NL80211_EXT_FEATURE_SET_SCAN_DWELL: This driver supports configuration of
- * channel dwell time.
- * @NL80211_EXT_FEATURE_BEACON_RATE_LEGACY: Driver supports beacon rate
- * configuration (AP/mesh), supporting a legacy (non HT/VHT) rate.
- * @NL80211_EXT_FEATURE_BEACON_RATE_HT: Driver supports beacon rate
- * configuration (AP/mesh) with HT rates.
- * @NL80211_EXT_FEATURE_BEACON_RATE_VHT: Driver supports beacon rate
- * configuration (AP/mesh) with VHT rates.
- * @NL80211_EXT_FEATURE_FILS_STA: This driver supports Fast Initial Link Setup
- * with user space SME (NL80211_CMD_AUTHENTICATE) in station mode.
- * @NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA: This driver supports randomized TA
- * in @NL80211_CMD_FRAME while not associated.
- * @NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA_CONNECTED: This driver supports
- * randomized TA in @NL80211_CMD_FRAME while associated.
- * @NL80211_EXT_FEATURE_SCHED_SCAN_RELATIVE_RSSI: The driver supports sched_scan
- * for reporting BSSs with better RSSI than the current connected BSS
- * (%NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI).
- * @NL80211_EXT_FEATURE_CQM_RSSI_LIST: With this driver the
- * %NL80211_ATTR_CQM_RSSI_THOLD attribute accepts a list of zero or more
- * RSSI threshold values to monitor rather than exactly one threshold.
- * @NL80211_EXT_FEATURE_FILS_SK_OFFLOAD: Driver SME supports FILS shared key
- * authentication with %NL80211_CMD_CONNECT.
- * @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK: Device wants to do 4-way
- * handshake with PSK in station mode (PSK is passed as part of the connect
- * and associate commands), doing it in the host might not be supported.
- * @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X: Device wants to do doing 4-way
- * handshake with 802.1X in station mode (will pass EAP frames to the host
- * and accept the set_pmk/del_pmk commands), doing it in the host might not
- * be supported.
- * @NL80211_EXT_FEATURE_FILS_MAX_CHANNEL_TIME: Driver is capable of overriding
- * the max channel attribute in the FILS request params IE with the
- * actual dwell time.
- * @NL80211_EXT_FEATURE_ACCEPT_BCAST_PROBE_RESP: Driver accepts broadcast probe
- * response
- * @NL80211_EXT_FEATURE_OCE_PROBE_REQ_HIGH_TX_RATE: Driver supports sending
- * the first probe request in each channel at rate of at least 5.5Mbps.
- * @NL80211_EXT_FEATURE_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION: Driver supports
- * probe request tx deferral and suppression
- * @NL80211_EXT_FEATURE_MFP_OPTIONAL: Driver supports the %NL80211_MFP_OPTIONAL
- * value in %NL80211_ATTR_USE_MFP.
- * @NL80211_EXT_FEATURE_LOW_SPAN_SCAN: Driver supports low span scan.
- * @NL80211_EXT_FEATURE_LOW_POWER_SCAN: Driver supports low power scan.
- * @NL80211_EXT_FEATURE_HIGH_ACCURACY_SCAN: Driver supports high accuracy scan.
- * @NL80211_EXT_FEATURE_DFS_OFFLOAD: HW/driver will offload DFS actions.
- * Device or driver will do all DFS-related actions by itself,
- * informing user-space about CAC progress, radar detection event,
- * channel change triggered by radar detection event.
- * No need to start CAC from user-space, no need to react to
- * "radar detected" event.
- * @NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211: Driver supports sending and
- * receiving control port frames over nl80211 instead of the netdevice.
- * @NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT: This driver/device supports
- * (average) ACK signal strength reporting.
- * @NL80211_EXT_FEATURE_TXQS: Driver supports FQ-CoDel-enabled intermediate
- * TXQs.
- * @NL80211_EXT_FEATURE_SCAN_RANDOM_SN: Driver/device supports randomizing the
- * SN in probe request frames if requested by %NL80211_SCAN_FLAG_RANDOM_SN.
- * @NL80211_EXT_FEATURE_SCAN_MIN_PREQ_CONTENT: Driver/device can omit all data
- * except for supported rates from the probe request content if requested
- * by the %NL80211_SCAN_FLAG_MIN_PREQ_CONTENT flag.
- * @NL80211_EXT_FEATURE_ENABLE_FTM_RESPONDER: Driver supports enabling fine
- * timing measurement responder role.
- *
- * @NL80211_EXT_FEATURE_CAN_REPLACE_PTK0: Driver/device confirm that they are
- * able to rekey an in-use key correctly. Userspace must not rekey PTK keys
- * if this flag is not set. Ignoring this can leak clear text packets and/or
- * freeze the connection.
- * @NL80211_EXT_FEATURE_EXT_KEY_ID: Driver supports "Extended Key ID for
- * Individually Addressed Frames" from IEEE802.11-2016.
- *
- * @NL80211_EXT_FEATURE_AIRTIME_FAIRNESS: Driver supports getting airtime
- * fairness for transmitted packets and has enabled airtime fairness
- * scheduling.
- *
- * @NL80211_EXT_FEATURE_AP_PMKSA_CACHING: Driver/device supports PMKSA caching
- * (set/del PMKSA operations) in AP mode.
- *
- * @NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD: Driver supports
- * filtering of sched scan results using band specific RSSI thresholds.
- *
- * @NL80211_EXT_FEATURE_STA_TX_PWR: This driver supports controlling tx power
- * to a station.
- *
- * @NL80211_EXT_FEATURE_SAE_OFFLOAD: Device wants to do SAE authentication in
- * station mode (SAE password is passed as part of the connect command).
- *
- * @NL80211_EXT_FEATURE_VLAN_OFFLOAD: The driver supports a single netdev
- * with VLAN tagged frames and separate VLAN-specific netdevs added using
- * vconfig similarly to the Ethernet case.
- *
- * @NL80211_EXT_FEATURE_AQL: The driver supports the Airtime Queue Limit (AQL)
- * feature, which prevents bufferbloat by using the expected transmission
- * time to limit the amount of data buffered in the hardware.
- *
- * @NL80211_EXT_FEATURE_BEACON_PROTECTION: The driver supports Beacon protection
- * and can receive key configuration for BIGTK using key indexes 6 and 7.
- * @NL80211_EXT_FEATURE_BEACON_PROTECTION_CLIENT: The driver supports Beacon
- * protection as a client only and cannot transmit protected beacons.
- *
- * @NL80211_EXT_FEATURE_CONTROL_PORT_NO_PREAUTH: The driver can disable the
- * forwarding of preauth frames over the control port. They are then
- * handled as ordinary data frames.
- *
- * @NL80211_EXT_FEATURE_PROTECTED_TWT: Driver supports protected TWT frames
- *
- * @NL80211_EXT_FEATURE_DEL_IBSS_STA: The driver supports removing stations
- * in IBSS mode, essentially by dropping their state.
- *
- * @NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS: management frame registrations
- * are possible for multicast frames and those will be reported properly.
- *
- * @NL80211_EXT_FEATURE_SCAN_FREQ_KHZ: This driver supports receiving and
- * reporting scan request with %NL80211_ATTR_SCAN_FREQ_KHZ. In order to
- * report %NL80211_ATTR_SCAN_FREQ_KHZ, %NL80211_SCAN_FLAG_FREQ_KHZ must be
- * included in the scan request.
- *
- * @NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_TX_STATUS: The driver
- * can report tx status for control port over nl80211 tx operations.
- *
- * @NL80211_EXT_FEATURE_OPERATING_CHANNEL_VALIDATION: Driver supports Operating
- * Channel Validation (OCV) when using driver's SME for RSNA handshakes.
- *
- * @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_AP_PSK: Device wants to do 4-way
- * handshake with PSK in AP mode (PSK is passed as part of the start AP
- * command).
- *
- * @NL80211_EXT_FEATURE_SAE_OFFLOAD_AP: Device wants to do SAE authentication
- * in AP mode (SAE password is passed as part of the start AP command).
- *
- * @NL80211_EXT_FEATURE_FILS_DISCOVERY: Driver/device supports FILS discovery
- * frames transmission
- *
- * @NL80211_EXT_FEATURE_UNSOL_BCAST_PROBE_RESP: Driver/device supports
- * unsolicited broadcast probe response transmission
- *
- * @NL80211_EXT_FEATURE_BEACON_RATE_HE: Driver supports beacon rate
- * configuration (AP/mesh) with HE rates.
- *
- * @NL80211_EXT_FEATURE_SECURE_LTF: Device supports secure LTF measurement
- * exchange protocol.
- *
- * @NL80211_EXT_FEATURE_SECURE_RTT: Device supports secure RTT measurement
- * exchange protocol.
- *
- * @NL80211_EXT_FEATURE_PROT_RANGE_NEGO_AND_MEASURE: Device supports management
- * frame protection for all management frames exchanged during the
- * negotiation and range measurement procedure.
- *
- * @NL80211_EXT_FEATURE_BSS_COLOR: The driver supports BSS color collision
- * detection and change announcemnts.
- *
- * @NUM_NL80211_EXT_FEATURES: number of extended features.
- * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
- */
- enum nl80211_ext_feature_index {
- NL80211_EXT_FEATURE_VHT_IBSS,
- NL80211_EXT_FEATURE_RRM,
- NL80211_EXT_FEATURE_MU_MIMO_AIR_SNIFFER,
- NL80211_EXT_FEATURE_SCAN_START_TIME,
- NL80211_EXT_FEATURE_BSS_PARENT_TSF,
- NL80211_EXT_FEATURE_SET_SCAN_DWELL,
- NL80211_EXT_FEATURE_BEACON_RATE_LEGACY,
- NL80211_EXT_FEATURE_BEACON_RATE_HT,
- NL80211_EXT_FEATURE_BEACON_RATE_VHT,
- NL80211_EXT_FEATURE_FILS_STA,
- NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA,
- NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA_CONNECTED,
- NL80211_EXT_FEATURE_SCHED_SCAN_RELATIVE_RSSI,
- NL80211_EXT_FEATURE_CQM_RSSI_LIST,
- NL80211_EXT_FEATURE_FILS_SK_OFFLOAD,
- NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK,
- NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X,
- NL80211_EXT_FEATURE_FILS_MAX_CHANNEL_TIME,
- NL80211_EXT_FEATURE_ACCEPT_BCAST_PROBE_RESP,
- NL80211_EXT_FEATURE_OCE_PROBE_REQ_HIGH_TX_RATE,
- NL80211_EXT_FEATURE_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION,
- NL80211_EXT_FEATURE_MFP_OPTIONAL,
- NL80211_EXT_FEATURE_LOW_SPAN_SCAN,
- NL80211_EXT_FEATURE_LOW_POWER_SCAN,
- NL80211_EXT_FEATURE_HIGH_ACCURACY_SCAN,
- NL80211_EXT_FEATURE_DFS_OFFLOAD,
- NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211,
- NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT,
- /* we renamed this - stay compatible */
- NL80211_EXT_FEATURE_DATA_ACK_SIGNAL_SUPPORT = NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT,
- NL80211_EXT_FEATURE_TXQS,
- NL80211_EXT_FEATURE_SCAN_RANDOM_SN,
- NL80211_EXT_FEATURE_SCAN_MIN_PREQ_CONTENT,
- NL80211_EXT_FEATURE_CAN_REPLACE_PTK0,
- NL80211_EXT_FEATURE_ENABLE_FTM_RESPONDER,
- NL80211_EXT_FEATURE_AIRTIME_FAIRNESS,
- NL80211_EXT_FEATURE_AP_PMKSA_CACHING,
- NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD,
- NL80211_EXT_FEATURE_EXT_KEY_ID,
- NL80211_EXT_FEATURE_STA_TX_PWR,
- NL80211_EXT_FEATURE_SAE_OFFLOAD,
- NL80211_EXT_FEATURE_VLAN_OFFLOAD,
- NL80211_EXT_FEATURE_AQL,
- NL80211_EXT_FEATURE_BEACON_PROTECTION,
- NL80211_EXT_FEATURE_CONTROL_PORT_NO_PREAUTH,
- NL80211_EXT_FEATURE_PROTECTED_TWT,
- NL80211_EXT_FEATURE_DEL_IBSS_STA,
- NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS,
- NL80211_EXT_FEATURE_BEACON_PROTECTION_CLIENT,
- NL80211_EXT_FEATURE_SCAN_FREQ_KHZ,
- NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_TX_STATUS,
- NL80211_EXT_FEATURE_OPERATING_CHANNEL_VALIDATION,
- NL80211_EXT_FEATURE_4WAY_HANDSHAKE_AP_PSK,
- NL80211_EXT_FEATURE_SAE_OFFLOAD_AP,
- NL80211_EXT_FEATURE_FILS_DISCOVERY,
- NL80211_EXT_FEATURE_UNSOL_BCAST_PROBE_RESP,
- NL80211_EXT_FEATURE_BEACON_RATE_HE,
- NL80211_EXT_FEATURE_SECURE_LTF,
- NL80211_EXT_FEATURE_SECURE_RTT,
- NL80211_EXT_FEATURE_PROT_RANGE_NEGO_AND_MEASURE,
- NL80211_EXT_FEATURE_BSS_COLOR,
- /* add new features before the definition below */
- NUM_NL80211_EXT_FEATURES,
- MAX_NL80211_EXT_FEATURES = NUM_NL80211_EXT_FEATURES - 1
- };
- /**
- * enum nl80211_probe_resp_offload_support_attr - optional supported
- * protocols for probe-response offloading by the driver/FW.
- * To be used with the %NL80211_ATTR_PROBE_RESP_OFFLOAD attribute.
- * Each enum value represents a bit in the bitmap of supported
- * protocols. Typically a subset of probe-requests belonging to a
- * supported protocol will be excluded from offload and uploaded
- * to the host.
- *
- * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS: Support for WPS ver. 1
- * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2: Support for WPS ver. 2
- * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P: Support for P2P
- * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U: Support for 802.11u
- */
- enum nl80211_probe_resp_offload_support_attr {
- NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS = 1<<0,
- NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2 = 1<<1,
- NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P = 1<<2,
- NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U = 1<<3,
- };
- /**
- * enum nl80211_connect_failed_reason - connection request failed reasons
- * @NL80211_CONN_FAIL_MAX_CLIENTS: Maximum number of clients that can be
- * handled by the AP is reached.
- * @NL80211_CONN_FAIL_BLOCKED_CLIENT: Connection request is rejected due to ACL.
- */
- enum nl80211_connect_failed_reason {
- NL80211_CONN_FAIL_MAX_CLIENTS,
- NL80211_CONN_FAIL_BLOCKED_CLIENT,
- };
- /**
- * enum nl80211_timeout_reason - timeout reasons
- *
- * @NL80211_TIMEOUT_UNSPECIFIED: Timeout reason unspecified.
- * @NL80211_TIMEOUT_SCAN: Scan (AP discovery) timed out.
- * @NL80211_TIMEOUT_AUTH: Authentication timed out.
- * @NL80211_TIMEOUT_ASSOC: Association timed out.
- */
- enum nl80211_timeout_reason {
- NL80211_TIMEOUT_UNSPECIFIED,
- NL80211_TIMEOUT_SCAN,
- NL80211_TIMEOUT_AUTH,
- NL80211_TIMEOUT_ASSOC,
- };
- /**
- * enum nl80211_scan_flags - scan request control flags
- *
- * Scan request control flags are used to control the handling
- * of NL80211_CMD_TRIGGER_SCAN and NL80211_CMD_START_SCHED_SCAN
- * requests.
- *
- * NL80211_SCAN_FLAG_LOW_SPAN, NL80211_SCAN_FLAG_LOW_POWER, and
- * NL80211_SCAN_FLAG_HIGH_ACCURACY flags are exclusive of each other, i.e., only
- * one of them can be used in the request.
- *
- * @NL80211_SCAN_FLAG_LOW_PRIORITY: scan request has low priority
- * @NL80211_SCAN_FLAG_FLUSH: flush cache before scanning
- * @NL80211_SCAN_FLAG_AP: force a scan even if the interface is configured
- * as AP and the beaconing has already been configured. This attribute is
- * dangerous because will destroy stations performance as a lot of frames
- * will be lost while scanning off-channel, therefore it must be used only
- * when really needed
- * @NL80211_SCAN_FLAG_RANDOM_ADDR: use a random MAC address for this scan (or
- * for scheduled scan: a different one for every scan iteration). When the
- * flag is set, depending on device capabilities the @NL80211_ATTR_MAC and
- * @NL80211_ATTR_MAC_MASK attributes may also be given in which case only
- * the masked bits will be preserved from the MAC address and the remainder
- * randomised. If the attributes are not given full randomisation (46 bits,
- * locally administered 1, multicast 0) is assumed.
- * This flag must not be requested when the feature isn't supported, check
- * the nl80211 feature flags for the device.
- * @NL80211_SCAN_FLAG_FILS_MAX_CHANNEL_TIME: fill the dwell time in the FILS
- * request parameters IE in the probe request
- * @NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP: accept broadcast probe responses
- * @NL80211_SCAN_FLAG_OCE_PROBE_REQ_HIGH_TX_RATE: send probe request frames at
- * rate of at least 5.5M. In case non OCE AP is discovered in the channel,
- * only the first probe req in the channel will be sent in high rate.
- * @NL80211_SCAN_FLAG_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION: allow probe request
- * tx deferral (dot11FILSProbeDelay shall be set to 15ms)
- * and suppression (if it has received a broadcast Probe Response frame,
- * Beacon frame or FILS Discovery frame from an AP that the STA considers
- * a suitable candidate for (re-)association - suitable in terms of
- * SSID and/or RSSI.
- * @NL80211_SCAN_FLAG_LOW_SPAN: Span corresponds to the total time taken to
- * accomplish the scan. Thus, this flag intends the driver to perform the
- * scan request with lesser span/duration. It is specific to the driver
- * implementations on how this is accomplished. Scan accuracy may get
- * impacted with this flag.
- * @NL80211_SCAN_FLAG_LOW_POWER: This flag intends the scan attempts to consume
- * optimal possible power. Drivers can resort to their specific means to
- * optimize the power. Scan accuracy may get impacted with this flag.
- * @NL80211_SCAN_FLAG_HIGH_ACCURACY: Accuracy here intends to the extent of scan
- * results obtained. Thus HIGH_ACCURACY scan flag aims to get maximum
- * possible scan results. This flag hints the driver to use the best
- * possible scan configuration to improve the accuracy in scanning.
- * Latency and power use may get impacted with this flag.
- * @NL80211_SCAN_FLAG_RANDOM_SN: randomize the sequence number in probe
- * request frames from this scan to avoid correlation/tracking being
- * possible.
- * @NL80211_SCAN_FLAG_MIN_PREQ_CONTENT: minimize probe request content to
- * only have supported rates and no additional capabilities (unless
- * added by userspace explicitly.)
- * @NL80211_SCAN_FLAG_FREQ_KHZ: report scan results with
- * %NL80211_ATTR_SCAN_FREQ_KHZ. This also means
- * %NL80211_ATTR_SCAN_FREQUENCIES will not be included.
- * @NL80211_SCAN_FLAG_COLOCATED_6GHZ: scan for colocated APs reported by
- * 2.4/5 GHz APs
- */
- enum nl80211_scan_flags {
- NL80211_SCAN_FLAG_LOW_PRIORITY = 1<<0,
- NL80211_SCAN_FLAG_FLUSH = 1<<1,
- NL80211_SCAN_FLAG_AP = 1<<2,
- NL80211_SCAN_FLAG_RANDOM_ADDR = 1<<3,
- NL80211_SCAN_FLAG_FILS_MAX_CHANNEL_TIME = 1<<4,
- NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP = 1<<5,
- NL80211_SCAN_FLAG_OCE_PROBE_REQ_HIGH_TX_RATE = 1<<6,
- NL80211_SCAN_FLAG_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION = 1<<7,
- NL80211_SCAN_FLAG_LOW_SPAN = 1<<8,
- NL80211_SCAN_FLAG_LOW_POWER = 1<<9,
- NL80211_SCAN_FLAG_HIGH_ACCURACY = 1<<10,
- NL80211_SCAN_FLAG_RANDOM_SN = 1<<11,
- NL80211_SCAN_FLAG_MIN_PREQ_CONTENT = 1<<12,
- NL80211_SCAN_FLAG_FREQ_KHZ = 1<<13,
- NL80211_SCAN_FLAG_COLOCATED_6GHZ = 1<<14,
- };
- /**
- * enum nl80211_acl_policy - access control policy
- *
- * Access control policy is applied on a MAC list set by
- * %NL80211_CMD_START_AP and %NL80211_CMD_SET_MAC_ACL, to
- * be used with %NL80211_ATTR_ACL_POLICY.
- *
- * @NL80211_ACL_POLICY_ACCEPT_UNLESS_LISTED: Deny stations which are
- * listed in ACL, i.e. allow all the stations which are not listed
- * in ACL to authenticate.
- * @NL80211_ACL_POLICY_DENY_UNLESS_LISTED: Allow the stations which are listed
- * in ACL, i.e. deny all the stations which are not listed in ACL.
- */
- enum nl80211_acl_policy {
- NL80211_ACL_POLICY_ACCEPT_UNLESS_LISTED,
- NL80211_ACL_POLICY_DENY_UNLESS_LISTED,
- };
- /**
- * enum nl80211_smps_mode - SMPS mode
- *
- * Requested SMPS mode (for AP mode)
- *
- * @NL80211_SMPS_OFF: SMPS off (use all antennas).
- * @NL80211_SMPS_STATIC: static SMPS (use a single antenna)
- * @NL80211_SMPS_DYNAMIC: dynamic smps (start with a single antenna and
- * turn on other antennas after CTS/RTS).
- */
- enum nl80211_smps_mode {
- NL80211_SMPS_OFF,
- NL80211_SMPS_STATIC,
- NL80211_SMPS_DYNAMIC,
- __NL80211_SMPS_AFTER_LAST,
- NL80211_SMPS_MAX = __NL80211_SMPS_AFTER_LAST - 1
- };
- /**
- * enum nl80211_radar_event - type of radar event for DFS operation
- *
- * Type of event to be used with NL80211_ATTR_RADAR_EVENT to inform userspace
- * about detected radars or success of the channel available check (CAC)
- *
- * @NL80211_RADAR_DETECTED: A radar pattern has been detected. The channel is
- * now unusable.
- * @NL80211_RADAR_CAC_FINISHED: Channel Availability Check has been finished,
- * the channel is now available.
- * @NL80211_RADAR_CAC_ABORTED: Channel Availability Check has been aborted, no
- * change to the channel status.
- * @NL80211_RADAR_NOP_FINISHED: The Non-Occupancy Period for this channel is
- * over, channel becomes usable.
- * @NL80211_RADAR_PRE_CAC_EXPIRED: Channel Availability Check done on this
- * non-operating channel is expired and no longer valid. New CAC must
- * be done on this channel before starting the operation. This is not
- * applicable for ETSI dfs domain where pre-CAC is valid for ever.
- * @NL80211_RADAR_CAC_STARTED: Channel Availability Check has been started,
- * should be generated by HW if NL80211_EXT_FEATURE_DFS_OFFLOAD is enabled.
- */
- enum nl80211_radar_event {
- NL80211_RADAR_DETECTED,
- NL80211_RADAR_CAC_FINISHED,
- NL80211_RADAR_CAC_ABORTED,
- NL80211_RADAR_NOP_FINISHED,
- NL80211_RADAR_PRE_CAC_EXPIRED,
- NL80211_RADAR_CAC_STARTED,
- };
- /**
- * enum nl80211_dfs_state - DFS states for channels
- *
- * Channel states used by the DFS code.
- *
- * @NL80211_DFS_USABLE: The channel can be used, but channel availability
- * check (CAC) must be performed before using it for AP or IBSS.
- * @NL80211_DFS_UNAVAILABLE: A radar has been detected on this channel, it
- * is therefore marked as not available.
- * @NL80211_DFS_AVAILABLE: The channel has been CAC checked and is available.
- */
- enum nl80211_dfs_state {
- NL80211_DFS_USABLE,
- NL80211_DFS_UNAVAILABLE,
- NL80211_DFS_AVAILABLE,
- };
- /**
- * enum nl80211_protocol_features - nl80211 protocol features
- * @NL80211_PROTOCOL_FEATURE_SPLIT_WIPHY_DUMP: nl80211 supports splitting
- * wiphy dumps (if requested by the application with the attribute
- * %NL80211_ATTR_SPLIT_WIPHY_DUMP. Also supported is filtering the
- * wiphy dump by %NL80211_ATTR_WIPHY, %NL80211_ATTR_IFINDEX or
- * %NL80211_ATTR_WDEV.
- */
- enum nl80211_protocol_features {
- NL80211_PROTOCOL_FEATURE_SPLIT_WIPHY_DUMP = 1 << 0,
- };
- /**
- * enum nl80211_crit_proto_id - nl80211 critical protocol identifiers
- *
- * @NL80211_CRIT_PROTO_UNSPEC: protocol unspecified.
- * @NL80211_CRIT_PROTO_DHCP: BOOTP or DHCPv6 protocol.
- * @NL80211_CRIT_PROTO_EAPOL: EAPOL protocol.
- * @NL80211_CRIT_PROTO_APIPA: APIPA protocol.
- * @NUM_NL80211_CRIT_PROTO: must be kept last.
- */
- enum nl80211_crit_proto_id {
- NL80211_CRIT_PROTO_UNSPEC,
- NL80211_CRIT_PROTO_DHCP,
- NL80211_CRIT_PROTO_EAPOL,
- NL80211_CRIT_PROTO_APIPA,
- /* add other protocols before this one */
- NUM_NL80211_CRIT_PROTO
- };
- /* maximum duration for critical protocol measures */
- #define NL80211_CRIT_PROTO_MAX_DURATION 5000 /* msec */
- /**
- * enum nl80211_rxmgmt_flags - flags for received management frame.
- *
- * Used by cfg80211_rx_mgmt()
- *
- * @NL80211_RXMGMT_FLAG_ANSWERED: frame was answered by device/driver.
- * @NL80211_RXMGMT_FLAG_EXTERNAL_AUTH: Host driver intends to offload
- * the authentication. Exclusively defined for host drivers that
- * advertises the SME functionality but would like the userspace
- * to handle certain authentication algorithms (e.g. SAE).
- */
- enum nl80211_rxmgmt_flags {
- NL80211_RXMGMT_FLAG_ANSWERED = 1 << 0,
- NL80211_RXMGMT_FLAG_EXTERNAL_AUTH = 1 << 1,
- };
- /*
- * If this flag is unset, the lower 24 bits are an OUI, if set
- * a Linux nl80211 vendor ID is used (no such IDs are allocated
- * yet, so that's not valid so far)
- */
- #define NL80211_VENDOR_ID_IS_LINUX 0x80000000
- /**
- * struct nl80211_vendor_cmd_info - vendor command data
- * @vendor_id: If the %NL80211_VENDOR_ID_IS_LINUX flag is clear, then the
- * value is a 24-bit OUI; if it is set then a separately allocated ID
- * may be used, but no such IDs are allocated yet. New IDs should be
- * added to this file when needed.
- * @subcmd: sub-command ID for the command
- */
- struct nl80211_vendor_cmd_info {
- __u32 vendor_id;
- __u32 subcmd;
- };
- /**
- * enum nl80211_tdls_peer_capability - TDLS peer flags.
- *
- * Used by tdls_mgmt() to determine which conditional elements need
- * to be added to TDLS Setup frames.
- *
- * @NL80211_TDLS_PEER_HT: TDLS peer is HT capable.
- * @NL80211_TDLS_PEER_VHT: TDLS peer is VHT capable.
- * @NL80211_TDLS_PEER_WMM: TDLS peer is WMM capable.
- * @NL80211_TDLS_PEER_HE: TDLS peer is HE capable.
- */
- enum nl80211_tdls_peer_capability {
- NL80211_TDLS_PEER_HT = 1<<0,
- NL80211_TDLS_PEER_VHT = 1<<1,
- NL80211_TDLS_PEER_WMM = 1<<2,
- NL80211_TDLS_PEER_HE = 1<<3,
- };
- /**
- * enum nl80211_sched_scan_plan - scanning plan for scheduled scan
- * @__NL80211_SCHED_SCAN_PLAN_INVALID: attribute number 0 is reserved
- * @NL80211_SCHED_SCAN_PLAN_INTERVAL: interval between scan iterations. In
- * seconds (u32).
- * @NL80211_SCHED_SCAN_PLAN_ITERATIONS: number of scan iterations in this
- * scan plan (u32). The last scan plan must not specify this attribute
- * because it will run infinitely. A value of zero is invalid as it will
- * make the scan plan meaningless.
- * @NL80211_SCHED_SCAN_PLAN_MAX: highest scheduled scan plan attribute number
- * currently defined
- * @__NL80211_SCHED_SCAN_PLAN_AFTER_LAST: internal use
- */
- enum nl80211_sched_scan_plan {
- __NL80211_SCHED_SCAN_PLAN_INVALID,
- NL80211_SCHED_SCAN_PLAN_INTERVAL,
- NL80211_SCHED_SCAN_PLAN_ITERATIONS,
- /* keep last */
- __NL80211_SCHED_SCAN_PLAN_AFTER_LAST,
- NL80211_SCHED_SCAN_PLAN_MAX =
- __NL80211_SCHED_SCAN_PLAN_AFTER_LAST - 1
- };
- /**
- * struct nl80211_bss_select_rssi_adjust - RSSI adjustment parameters.
- *
- * @band: band of BSS that must match for RSSI value adjustment. The value
- * of this field is according to &enum nl80211_band.
- * @delta: value used to adjust the RSSI value of matching BSS in dB.
- */
- struct nl80211_bss_select_rssi_adjust {
- __u8 band;
- __s8 delta;
- } __attribute__((packed));
- /**
- * enum nl80211_bss_select_attr - attributes for bss selection.
- *
- * @__NL80211_BSS_SELECT_ATTR_INVALID: reserved.
- * @NL80211_BSS_SELECT_ATTR_RSSI: Flag indicating only RSSI-based BSS selection
- * is requested.
- * @NL80211_BSS_SELECT_ATTR_BAND_PREF: attribute indicating BSS
- * selection should be done such that the specified band is preferred.
- * When there are multiple BSS-es in the preferred band, the driver
- * shall use RSSI-based BSS selection as a second step. The value of
- * this attribute is according to &enum nl80211_band (u32).
- * @NL80211_BSS_SELECT_ATTR_RSSI_ADJUST: When present the RSSI level for
- * BSS-es in the specified band is to be adjusted before doing
- * RSSI-based BSS selection. The attribute value is a packed structure
- * value as specified by &struct nl80211_bss_select_rssi_adjust.
- * @NL80211_BSS_SELECT_ATTR_MAX: highest bss select attribute number.
- * @__NL80211_BSS_SELECT_ATTR_AFTER_LAST: internal use.
- *
- * One and only one of these attributes are found within %NL80211_ATTR_BSS_SELECT
- * for %NL80211_CMD_CONNECT. It specifies the required BSS selection behaviour
- * which the driver shall use.
- */
- enum nl80211_bss_select_attr {
- __NL80211_BSS_SELECT_ATTR_INVALID,
- NL80211_BSS_SELECT_ATTR_RSSI,
- NL80211_BSS_SELECT_ATTR_BAND_PREF,
- NL80211_BSS_SELECT_ATTR_RSSI_ADJUST,
- /* keep last */
- __NL80211_BSS_SELECT_ATTR_AFTER_LAST,
- NL80211_BSS_SELECT_ATTR_MAX = __NL80211_BSS_SELECT_ATTR_AFTER_LAST - 1
- };
- /**
- * enum nl80211_nan_function_type - NAN function type
- *
- * Defines the function type of a NAN function
- *
- * @NL80211_NAN_FUNC_PUBLISH: function is publish
- * @NL80211_NAN_FUNC_SUBSCRIBE: function is subscribe
- * @NL80211_NAN_FUNC_FOLLOW_UP: function is follow-up
- */
- enum nl80211_nan_function_type {
- NL80211_NAN_FUNC_PUBLISH,
- NL80211_NAN_FUNC_SUBSCRIBE,
- NL80211_NAN_FUNC_FOLLOW_UP,
- /* keep last */
- __NL80211_NAN_FUNC_TYPE_AFTER_LAST,
- NL80211_NAN_FUNC_MAX_TYPE = __NL80211_NAN_FUNC_TYPE_AFTER_LAST - 1,
- };
- /**
- * enum nl80211_nan_publish_type - NAN publish tx type
- *
- * Defines how to send publish Service Discovery Frames
- *
- * @NL80211_NAN_SOLICITED_PUBLISH: publish function is solicited
- * @NL80211_NAN_UNSOLICITED_PUBLISH: publish function is unsolicited
- */
- enum nl80211_nan_publish_type {
- NL80211_NAN_SOLICITED_PUBLISH = 1 << 0,
- NL80211_NAN_UNSOLICITED_PUBLISH = 1 << 1,
- };
- /**
- * enum nl80211_nan_func_term_reason - NAN functions termination reason
- *
- * Defines termination reasons of a NAN function
- *
- * @NL80211_NAN_FUNC_TERM_REASON_USER_REQUEST: requested by user
- * @NL80211_NAN_FUNC_TERM_REASON_TTL_EXPIRED: timeout
- * @NL80211_NAN_FUNC_TERM_REASON_ERROR: errored
- */
- enum nl80211_nan_func_term_reason {
- NL80211_NAN_FUNC_TERM_REASON_USER_REQUEST,
- NL80211_NAN_FUNC_TERM_REASON_TTL_EXPIRED,
- NL80211_NAN_FUNC_TERM_REASON_ERROR,
- };
- #define NL80211_NAN_FUNC_SERVICE_ID_LEN 6
- #define NL80211_NAN_FUNC_SERVICE_SPEC_INFO_MAX_LEN 0xff
- #define NL80211_NAN_FUNC_SRF_MAX_LEN 0xff
- /**
- * enum nl80211_nan_func_attributes - NAN function attributes
- * @__NL80211_NAN_FUNC_INVALID: invalid
- * @NL80211_NAN_FUNC_TYPE: &enum nl80211_nan_function_type (u8).
- * @NL80211_NAN_FUNC_SERVICE_ID: 6 bytes of the service ID hash as
- * specified in NAN spec. This is a binary attribute.
- * @NL80211_NAN_FUNC_PUBLISH_TYPE: relevant if the function's type is
- * publish. Defines the transmission type for the publish Service Discovery
- * Frame, see &enum nl80211_nan_publish_type. Its type is u8.
- * @NL80211_NAN_FUNC_PUBLISH_BCAST: relevant if the function is a solicited
- * publish. Should the solicited publish Service Discovery Frame be sent to
- * the NAN Broadcast address. This is a flag.
- * @NL80211_NAN_FUNC_SUBSCRIBE_ACTIVE: relevant if the function's type is
- * subscribe. Is the subscribe active. This is a flag.
- * @NL80211_NAN_FUNC_FOLLOW_UP_ID: relevant if the function's type is follow up.
- * The instance ID for the follow up Service Discovery Frame. This is u8.
- * @NL80211_NAN_FUNC_FOLLOW_UP_REQ_ID: relevant if the function's type
- * is follow up. This is a u8.
- * The requestor instance ID for the follow up Service Discovery Frame.
- * @NL80211_NAN_FUNC_FOLLOW_UP_DEST: the MAC address of the recipient of the
- * follow up Service Discovery Frame. This is a binary attribute.
- * @NL80211_NAN_FUNC_CLOSE_RANGE: is this function limited for devices in a
- * close range. The range itself (RSSI) is defined by the device.
- * This is a flag.
- * @NL80211_NAN_FUNC_TTL: strictly positive number of DWs this function should
- * stay active. If not present infinite TTL is assumed. This is a u32.
- * @NL80211_NAN_FUNC_SERVICE_INFO: array of bytes describing the service
- * specific info. This is a binary attribute.
- * @NL80211_NAN_FUNC_SRF: Service Receive Filter. This is a nested attribute.
- * See &enum nl80211_nan_srf_attributes.
- * @NL80211_NAN_FUNC_RX_MATCH_FILTER: Receive Matching filter. This is a nested
- * attribute. It is a list of binary values.
- * @NL80211_NAN_FUNC_TX_MATCH_FILTER: Transmit Matching filter. This is a
- * nested attribute. It is a list of binary values.
- * @NL80211_NAN_FUNC_INSTANCE_ID: The instance ID of the function.
- * Its type is u8 and it cannot be 0.
- * @NL80211_NAN_FUNC_TERM_REASON: NAN function termination reason.
- * See &enum nl80211_nan_func_term_reason.
- *
- * @NUM_NL80211_NAN_FUNC_ATTR: internal
- * @NL80211_NAN_FUNC_ATTR_MAX: highest NAN function attribute
- */
- enum nl80211_nan_func_attributes {
- __NL80211_NAN_FUNC_INVALID,
- NL80211_NAN_FUNC_TYPE,
- NL80211_NAN_FUNC_SERVICE_ID,
- NL80211_NAN_FUNC_PUBLISH_TYPE,
- NL80211_NAN_FUNC_PUBLISH_BCAST,
- NL80211_NAN_FUNC_SUBSCRIBE_ACTIVE,
- NL80211_NAN_FUNC_FOLLOW_UP_ID,
- NL80211_NAN_FUNC_FOLLOW_UP_REQ_ID,
- NL80211_NAN_FUNC_FOLLOW_UP_DEST,
- NL80211_NAN_FUNC_CLOSE_RANGE,
- NL80211_NAN_FUNC_TTL,
- NL80211_NAN_FUNC_SERVICE_INFO,
- NL80211_NAN_FUNC_SRF,
- NL80211_NAN_FUNC_RX_MATCH_FILTER,
- NL80211_NAN_FUNC_TX_MATCH_FILTER,
- NL80211_NAN_FUNC_INSTANCE_ID,
- NL80211_NAN_FUNC_TERM_REASON,
- /* keep last */
- NUM_NL80211_NAN_FUNC_ATTR,
- NL80211_NAN_FUNC_ATTR_MAX = NUM_NL80211_NAN_FUNC_ATTR - 1
- };
- /**
- * enum nl80211_nan_srf_attributes - NAN Service Response filter attributes
- * @__NL80211_NAN_SRF_INVALID: invalid
- * @NL80211_NAN_SRF_INCLUDE: present if the include bit of the SRF set.
- * This is a flag.
- * @NL80211_NAN_SRF_BF: Bloom Filter. Present if and only if
- * %NL80211_NAN_SRF_MAC_ADDRS isn't present. This attribute is binary.
- * @NL80211_NAN_SRF_BF_IDX: index of the Bloom Filter. Mandatory if
- * %NL80211_NAN_SRF_BF is present. This is a u8.
- * @NL80211_NAN_SRF_MAC_ADDRS: list of MAC addresses for the SRF. Present if
- * and only if %NL80211_NAN_SRF_BF isn't present. This is a nested
- * attribute. Each nested attribute is a MAC address.
- * @NUM_NL80211_NAN_SRF_ATTR: internal
- * @NL80211_NAN_SRF_ATTR_MAX: highest NAN SRF attribute
- */
- enum nl80211_nan_srf_attributes {
- __NL80211_NAN_SRF_INVALID,
- NL80211_NAN_SRF_INCLUDE,
- NL80211_NAN_SRF_BF,
- NL80211_NAN_SRF_BF_IDX,
- NL80211_NAN_SRF_MAC_ADDRS,
- /* keep last */
- NUM_NL80211_NAN_SRF_ATTR,
- NL80211_NAN_SRF_ATTR_MAX = NUM_NL80211_NAN_SRF_ATTR - 1,
- };
- /**
- * enum nl80211_nan_match_attributes - NAN match attributes
- * @__NL80211_NAN_MATCH_INVALID: invalid
- * @NL80211_NAN_MATCH_FUNC_LOCAL: the local function that had the
- * match. This is a nested attribute.
- * See &enum nl80211_nan_func_attributes.
- * @NL80211_NAN_MATCH_FUNC_PEER: the peer function
- * that caused the match. This is a nested attribute.
- * See &enum nl80211_nan_func_attributes.
- *
- * @NUM_NL80211_NAN_MATCH_ATTR: internal
- * @NL80211_NAN_MATCH_ATTR_MAX: highest NAN match attribute
- */
- enum nl80211_nan_match_attributes {
- __NL80211_NAN_MATCH_INVALID,
- NL80211_NAN_MATCH_FUNC_LOCAL,
- NL80211_NAN_MATCH_FUNC_PEER,
- /* keep last */
- NUM_NL80211_NAN_MATCH_ATTR,
- NL80211_NAN_MATCH_ATTR_MAX = NUM_NL80211_NAN_MATCH_ATTR - 1
- };
- /**
- * nl80211_external_auth_action - Action to perform with external
- * authentication request. Used by NL80211_ATTR_EXTERNAL_AUTH_ACTION.
- * @NL80211_EXTERNAL_AUTH_START: Start the authentication.
- * @NL80211_EXTERNAL_AUTH_ABORT: Abort the ongoing authentication.
- */
- enum nl80211_external_auth_action {
- NL80211_EXTERNAL_AUTH_START,
- NL80211_EXTERNAL_AUTH_ABORT,
- };
- /**
- * enum nl80211_ftm_responder_attributes - fine timing measurement
- * responder attributes
- * @__NL80211_FTM_RESP_ATTR_INVALID: Invalid
- * @NL80211_FTM_RESP_ATTR_ENABLED: FTM responder is enabled
- * @NL80211_FTM_RESP_ATTR_LCI: The content of Measurement Report Element
- * (9.4.2.22 in 802.11-2016) with type 8 - LCI (9.4.2.22.10),
- * i.e. starting with the measurement token
- * @NL80211_FTM_RESP_ATTR_CIVIC: The content of Measurement Report Element
- * (9.4.2.22 in 802.11-2016) with type 11 - Civic (Section 9.4.2.22.13),
- * i.e. starting with the measurement token
- * @__NL80211_FTM_RESP_ATTR_LAST: Internal
- * @NL80211_FTM_RESP_ATTR_MAX: highest FTM responder attribute.
- */
- enum nl80211_ftm_responder_attributes {
- __NL80211_FTM_RESP_ATTR_INVALID,
- NL80211_FTM_RESP_ATTR_ENABLED,
- NL80211_FTM_RESP_ATTR_LCI,
- NL80211_FTM_RESP_ATTR_CIVICLOC,
- /* keep last */
- __NL80211_FTM_RESP_ATTR_LAST,
- NL80211_FTM_RESP_ATTR_MAX = __NL80211_FTM_RESP_ATTR_LAST - 1,
- };
- /*
- * enum nl80211_ftm_responder_stats - FTM responder statistics
- *
- * These attribute types are used with %NL80211_ATTR_FTM_RESPONDER_STATS
- * when getting FTM responder statistics.
- *
- * @__NL80211_FTM_STATS_INVALID: attribute number 0 is reserved
- * @NL80211_FTM_STATS_SUCCESS_NUM: number of FTM sessions in which all frames
- * were ssfully answered (u32)
- * @NL80211_FTM_STATS_PARTIAL_NUM: number of FTM sessions in which part of the
- * frames were successfully answered (u32)
- * @NL80211_FTM_STATS_FAILED_NUM: number of failed FTM sessions (u32)
- * @NL80211_FTM_STATS_ASAP_NUM: number of ASAP sessions (u32)
- * @NL80211_FTM_STATS_NON_ASAP_NUM: number of non-ASAP sessions (u32)
- * @NL80211_FTM_STATS_TOTAL_DURATION_MSEC: total sessions durations - gives an
- * indication of how much time the responder was busy (u64, msec)
- * @NL80211_FTM_STATS_UNKNOWN_TRIGGERS_NUM: number of unknown FTM triggers -
- * triggers from initiators that didn't finish successfully the negotiation
- * phase with the responder (u32)
- * @NL80211_FTM_STATS_RESCHEDULE_REQUESTS_NUM: number of FTM reschedule requests
- * - initiator asks for a new scheduling although it already has scheduled
- * FTM slot (u32)
- * @NL80211_FTM_STATS_OUT_OF_WINDOW_TRIGGERS_NUM: number of FTM triggers out of
- * scheduled window (u32)
- * @NL80211_FTM_STATS_PAD: used for padding, ignore
- * @__NL80211_TXQ_ATTR_AFTER_LAST: Internal
- * @NL80211_FTM_STATS_MAX: highest possible FTM responder stats attribute
- */
- enum nl80211_ftm_responder_stats {
- __NL80211_FTM_STATS_INVALID,
- NL80211_FTM_STATS_SUCCESS_NUM,
- NL80211_FTM_STATS_PARTIAL_NUM,
- NL80211_FTM_STATS_FAILED_NUM,
- NL80211_FTM_STATS_ASAP_NUM,
- NL80211_FTM_STATS_NON_ASAP_NUM,
- NL80211_FTM_STATS_TOTAL_DURATION_MSEC,
- NL80211_FTM_STATS_UNKNOWN_TRIGGERS_NUM,
- NL80211_FTM_STATS_RESCHEDULE_REQUESTS_NUM,
- NL80211_FTM_STATS_OUT_OF_WINDOW_TRIGGERS_NUM,
- NL80211_FTM_STATS_PAD,
- /* keep last */
- __NL80211_FTM_STATS_AFTER_LAST,
- NL80211_FTM_STATS_MAX = __NL80211_FTM_STATS_AFTER_LAST - 1
- };
- /**
- * enum nl80211_preamble - frame preamble types
- * @NL80211_PREAMBLE_LEGACY: legacy (HR/DSSS, OFDM, ERP PHY) preamble
- * @NL80211_PREAMBLE_HT: HT preamble
- * @NL80211_PREAMBLE_VHT: VHT preamble
- * @NL80211_PREAMBLE_DMG: DMG preamble
- * @NL80211_PREAMBLE_HE: HE preamble
- */
- enum nl80211_preamble {
- NL80211_PREAMBLE_LEGACY,
- NL80211_PREAMBLE_HT,
- NL80211_PREAMBLE_VHT,
- NL80211_PREAMBLE_DMG,
- NL80211_PREAMBLE_HE,
- };
- /**
- * enum nl80211_peer_measurement_type - peer measurement types
- * @NL80211_PMSR_TYPE_INVALID: invalid/unused, needed as we use
- * these numbers also for attributes
- *
- * @NL80211_PMSR_TYPE_FTM: flight time measurement
- *
- * @NUM_NL80211_PMSR_TYPES: internal
- * @NL80211_PMSR_TYPE_MAX: highest type number
- */
- enum nl80211_peer_measurement_type {
- NL80211_PMSR_TYPE_INVALID,
- NL80211_PMSR_TYPE_FTM,
- NUM_NL80211_PMSR_TYPES,
- NL80211_PMSR_TYPE_MAX = NUM_NL80211_PMSR_TYPES - 1
- };
- /**
- * enum nl80211_peer_measurement_status - peer measurement status
- * @NL80211_PMSR_STATUS_SUCCESS: measurement completed successfully
- * @NL80211_PMSR_STATUS_REFUSED: measurement was locally refused
- * @NL80211_PMSR_STATUS_TIMEOUT: measurement timed out
- * @NL80211_PMSR_STATUS_FAILURE: measurement failed, a type-dependent
- * reason may be available in the response data
- */
- enum nl80211_peer_measurement_status {
- NL80211_PMSR_STATUS_SUCCESS,
- NL80211_PMSR_STATUS_REFUSED,
- NL80211_PMSR_STATUS_TIMEOUT,
- NL80211_PMSR_STATUS_FAILURE,
- };
- /**
- * enum nl80211_peer_measurement_req - peer measurement request attributes
- * @__NL80211_PMSR_REQ_ATTR_INVALID: invalid
- *
- * @NL80211_PMSR_REQ_ATTR_DATA: This is a nested attribute with measurement
- * type-specific request data inside. The attributes used are from the
- * enums named nl80211_peer_measurement_<type>_req.
- * @NL80211_PMSR_REQ_ATTR_GET_AP_TSF: include AP TSF timestamp, if supported
- * (flag attribute)
- *
- * @NUM_NL80211_PMSR_REQ_ATTRS: internal
- * @NL80211_PMSR_REQ_ATTR_MAX: highest attribute number
- */
- enum nl80211_peer_measurement_req {
- __NL80211_PMSR_REQ_ATTR_INVALID,
- NL80211_PMSR_REQ_ATTR_DATA,
- NL80211_PMSR_REQ_ATTR_GET_AP_TSF,
- /* keep last */
- NUM_NL80211_PMSR_REQ_ATTRS,
- NL80211_PMSR_REQ_ATTR_MAX = NUM_NL80211_PMSR_REQ_ATTRS - 1
- };
- /**
- * enum nl80211_peer_measurement_resp - peer measurement response attributes
- * @__NL80211_PMSR_RESP_ATTR_INVALID: invalid
- *
- * @NL80211_PMSR_RESP_ATTR_DATA: This is a nested attribute with measurement
- * type-specific results inside. The attributes used are from the enums
- * named nl80211_peer_measurement_<type>_resp.
- * @NL80211_PMSR_RESP_ATTR_STATUS: u32 value with the measurement status
- * (using values from &enum nl80211_peer_measurement_status.)
- * @NL80211_PMSR_RESP_ATTR_HOST_TIME: host time (%CLOCK_BOOTTIME) when the
- * result was measured; this value is not expected to be accurate to
- * more than 20ms. (u64, nanoseconds)
- * @NL80211_PMSR_RESP_ATTR_AP_TSF: TSF of the AP that the interface
- * doing the measurement is connected to when the result was measured.
- * This shall be accurately reported if supported and requested
- * (u64, usec)
- * @NL80211_PMSR_RESP_ATTR_FINAL: If results are sent to the host partially
- * (*e.g. with FTM per-burst data) this flag will be cleared on all but
- * the last result; if all results are combined it's set on the single
- * result.
- * @NL80211_PMSR_RESP_ATTR_PAD: padding for 64-bit attributes, ignore
- *
- * @NUM_NL80211_PMSR_RESP_ATTRS: internal
- * @NL80211_PMSR_RESP_ATTR_MAX: highest attribute number
- */
- enum nl80211_peer_measurement_resp {
- __NL80211_PMSR_RESP_ATTR_INVALID,
- NL80211_PMSR_RESP_ATTR_DATA,
- NL80211_PMSR_RESP_ATTR_STATUS,
- NL80211_PMSR_RESP_ATTR_HOST_TIME,
- NL80211_PMSR_RESP_ATTR_AP_TSF,
- NL80211_PMSR_RESP_ATTR_FINAL,
- NL80211_PMSR_RESP_ATTR_PAD,
- /* keep last */
- NUM_NL80211_PMSR_RESP_ATTRS,
- NL80211_PMSR_RESP_ATTR_MAX = NUM_NL80211_PMSR_RESP_ATTRS - 1
- };
- /**
- * enum nl80211_peer_measurement_peer_attrs - peer attributes for measurement
- * @__NL80211_PMSR_PEER_ATTR_INVALID: invalid
- *
- * @NL80211_PMSR_PEER_ATTR_ADDR: peer's MAC address
- * @NL80211_PMSR_PEER_ATTR_CHAN: channel definition, nested, using top-level
- * attributes like %NL80211_ATTR_WIPHY_FREQ etc.
- * @NL80211_PMSR_PEER_ATTR_REQ: This is a nested attribute indexed by
- * measurement type, with attributes from the
- * &enum nl80211_peer_measurement_req inside.
- * @NL80211_PMSR_PEER_ATTR_RESP: This is a nested attribute indexed by
- * measurement type, with attributes from the
- * &enum nl80211_peer_measurement_resp inside.
- *
- * @NUM_NL80211_PMSR_PEER_ATTRS: internal
- * @NL80211_PMSR_PEER_ATTR_MAX: highest attribute number
- */
- enum nl80211_peer_measurement_peer_attrs {
- __NL80211_PMSR_PEER_ATTR_INVALID,
- NL80211_PMSR_PEER_ATTR_ADDR,
- NL80211_PMSR_PEER_ATTR_CHAN,
- NL80211_PMSR_PEER_ATTR_REQ,
- NL80211_PMSR_PEER_ATTR_RESP,
- /* keep last */
- NUM_NL80211_PMSR_PEER_ATTRS,
- NL80211_PMSR_PEER_ATTR_MAX = NUM_NL80211_PMSR_PEER_ATTRS - 1,
- };
- /**
- * enum nl80211_peer_measurement_attrs - peer measurement attributes
- * @__NL80211_PMSR_ATTR_INVALID: invalid
- *
- * @NL80211_PMSR_ATTR_MAX_PEERS: u32 attribute used for capability
- * advertisement only, indicates the maximum number of peers
- * measurements can be done with in a single request
- * @NL80211_PMSR_ATTR_REPORT_AP_TSF: flag attribute in capability
- * indicating that the connected AP's TSF can be reported in
- * measurement results
- * @NL80211_PMSR_ATTR_RANDOMIZE_MAC_ADDR: flag attribute in capability
- * indicating that MAC address randomization is supported.
- * @NL80211_PMSR_ATTR_TYPE_CAPA: capabilities reported by the device,
- * this contains a nesting indexed by measurement type, and
- * type-specific capabilities inside, which are from the enums
- * named nl80211_peer_measurement_<type>_capa.
- * @NL80211_PMSR_ATTR_PEERS: nested attribute, the nesting index is
- * meaningless, just a list of peers to measure with, with the
- * sub-attributes taken from
- * &enum nl80211_peer_measurement_peer_attrs.
- *
- * @NUM_NL80211_PMSR_ATTR: internal
- * @NL80211_PMSR_ATTR_MAX: highest attribute number
- */
- enum nl80211_peer_measurement_attrs {
- __NL80211_PMSR_ATTR_INVALID,
- NL80211_PMSR_ATTR_MAX_PEERS,
- NL80211_PMSR_ATTR_REPORT_AP_TSF,
- NL80211_PMSR_ATTR_RANDOMIZE_MAC_ADDR,
- NL80211_PMSR_ATTR_TYPE_CAPA,
- NL80211_PMSR_ATTR_PEERS,
- /* keep last */
- NUM_NL80211_PMSR_ATTR,
- NL80211_PMSR_ATTR_MAX = NUM_NL80211_PMSR_ATTR - 1
- };
- /**
- * enum nl80211_peer_measurement_ftm_capa - FTM capabilities
- * @__NL80211_PMSR_FTM_CAPA_ATTR_INVALID: invalid
- *
- * @NL80211_PMSR_FTM_CAPA_ATTR_ASAP: flag attribute indicating ASAP mode
- * is supported
- * @NL80211_PMSR_FTM_CAPA_ATTR_NON_ASAP: flag attribute indicating non-ASAP
- * mode is supported
- * @NL80211_PMSR_FTM_CAPA_ATTR_REQ_LCI: flag attribute indicating if LCI
- * data can be requested during the measurement
- * @NL80211_PMSR_FTM_CAPA_ATTR_REQ_CIVICLOC: flag attribute indicating if civic
- * location data can be requested during the measurement
- * @NL80211_PMSR_FTM_CAPA_ATTR_PREAMBLES: u32 bitmap attribute of bits
- * from &enum nl80211_preamble.
- * @NL80211_PMSR_FTM_CAPA_ATTR_BANDWIDTHS: bitmap of values from
- * &enum nl80211_chan_width indicating the supported channel
- * bandwidths for FTM. Note that a higher channel bandwidth may be
- * configured to allow for other measurements types with different
- * bandwidth requirement in the same measurement.
- * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_BURSTS_EXPONENT: u32 attribute indicating
- * the maximum bursts exponent that can be used (if not present anything
- * is valid)
- * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_FTMS_PER_BURST: u32 attribute indicating
- * the maximum FTMs per burst (if not present anything is valid)
- * @NL80211_PMSR_FTM_CAPA_ATTR_TRIGGER_BASED: flag attribute indicating if
- * trigger based ranging measurement is supported
- * @NL80211_PMSR_FTM_CAPA_ATTR_NON_TRIGGER_BASED: flag attribute indicating
- * if non trigger based ranging measurement is supported
- *
- * @NUM_NL80211_PMSR_FTM_CAPA_ATTR: internal
- * @NL80211_PMSR_FTM_CAPA_ATTR_MAX: highest attribute number
- */
- enum nl80211_peer_measurement_ftm_capa {
- __NL80211_PMSR_FTM_CAPA_ATTR_INVALID,
- NL80211_PMSR_FTM_CAPA_ATTR_ASAP,
- NL80211_PMSR_FTM_CAPA_ATTR_NON_ASAP,
- NL80211_PMSR_FTM_CAPA_ATTR_REQ_LCI,
- NL80211_PMSR_FTM_CAPA_ATTR_REQ_CIVICLOC,
- NL80211_PMSR_FTM_CAPA_ATTR_PREAMBLES,
- NL80211_PMSR_FTM_CAPA_ATTR_BANDWIDTHS,
- NL80211_PMSR_FTM_CAPA_ATTR_MAX_BURSTS_EXPONENT,
- NL80211_PMSR_FTM_CAPA_ATTR_MAX_FTMS_PER_BURST,
- NL80211_PMSR_FTM_CAPA_ATTR_TRIGGER_BASED,
- NL80211_PMSR_FTM_CAPA_ATTR_NON_TRIGGER_BASED,
- /* keep last */
- NUM_NL80211_PMSR_FTM_CAPA_ATTR,
- NL80211_PMSR_FTM_CAPA_ATTR_MAX = NUM_NL80211_PMSR_FTM_CAPA_ATTR - 1
- };
- /**
- * enum nl80211_peer_measurement_ftm_req - FTM request attributes
- * @__NL80211_PMSR_FTM_REQ_ATTR_INVALID: invalid
- *
- * @NL80211_PMSR_FTM_REQ_ATTR_ASAP: ASAP mode requested (flag)
- * @NL80211_PMSR_FTM_REQ_ATTR_PREAMBLE: preamble type (see
- * &enum nl80211_preamble), optional for DMG (u32)
- * @NL80211_PMSR_FTM_REQ_ATTR_NUM_BURSTS_EXP: number of bursts exponent as in
- * 802.11-2016 9.4.2.168 "Fine Timing Measurement Parameters element"
- * (u8, 0-15, optional with default 15 i.e. "no preference")
- * @NL80211_PMSR_FTM_REQ_ATTR_BURST_PERIOD: interval between bursts in units
- * of 100ms (u16, optional with default 0)
- * @NL80211_PMSR_FTM_REQ_ATTR_BURST_DURATION: burst duration, as in 802.11-2016
- * Table 9-257 "Burst Duration field encoding" (u8, 0-15, optional with
- * default 15 i.e. "no preference")
- * @NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST: number of successful FTM frames
- * requested per burst
- * (u8, 0-31, optional with default 0 i.e. "no preference")
- * @NL80211_PMSR_FTM_REQ_ATTR_NUM_FTMR_RETRIES: number of FTMR frame retries
- * (u8, default 3)
- * @NL80211_PMSR_FTM_REQ_ATTR_REQUEST_LCI: request LCI data (flag)
- * @NL80211_PMSR_FTM_REQ_ATTR_REQUEST_CIVICLOC: request civic location data
- * (flag)
- * @NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED: request trigger based ranging
- * measurement (flag).
- * This attribute and %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED are
- * mutually exclusive.
- * if neither %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED nor
- * %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set, EDCA based
- * ranging will be used.
- * @NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED: request non trigger based
- * ranging measurement (flag)
- * This attribute and %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED are
- * mutually exclusive.
- * if neither %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED nor
- * %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set, EDCA based
- * ranging will be used.
- * @NL80211_PMSR_FTM_REQ_ATTR_LMR_FEEDBACK: negotiate for LMR feedback. Only
- * valid if either %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED or
- * %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set.
- * @NL80211_PMSR_FTM_REQ_ATTR_BSS_COLOR: optional. The BSS color of the
- * responder. Only valid if %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED
- * or %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED is set.
- *
- * @NUM_NL80211_PMSR_FTM_REQ_ATTR: internal
- * @NL80211_PMSR_FTM_REQ_ATTR_MAX: highest attribute number
- */
- enum nl80211_peer_measurement_ftm_req {
- __NL80211_PMSR_FTM_REQ_ATTR_INVALID,
- NL80211_PMSR_FTM_REQ_ATTR_ASAP,
- NL80211_PMSR_FTM_REQ_ATTR_PREAMBLE,
- NL80211_PMSR_FTM_REQ_ATTR_NUM_BURSTS_EXP,
- NL80211_PMSR_FTM_REQ_ATTR_BURST_PERIOD,
- NL80211_PMSR_FTM_REQ_ATTR_BURST_DURATION,
- NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST,
- NL80211_PMSR_FTM_REQ_ATTR_NUM_FTMR_RETRIES,
- NL80211_PMSR_FTM_REQ_ATTR_REQUEST_LCI,
- NL80211_PMSR_FTM_REQ_ATTR_REQUEST_CIVICLOC,
- NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED,
- NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED,
- NL80211_PMSR_FTM_REQ_ATTR_LMR_FEEDBACK,
- NL80211_PMSR_FTM_REQ_ATTR_BSS_COLOR,
- /* keep last */
- NUM_NL80211_PMSR_FTM_REQ_ATTR,
- NL80211_PMSR_FTM_REQ_ATTR_MAX = NUM_NL80211_PMSR_FTM_REQ_ATTR - 1
- };
- /**
- * enum nl80211_peer_measurement_ftm_failure_reasons - FTM failure reasons
- * @NL80211_PMSR_FTM_FAILURE_UNSPECIFIED: unspecified failure, not used
- * @NL80211_PMSR_FTM_FAILURE_NO_RESPONSE: no response from the FTM responder
- * @NL80211_PMSR_FTM_FAILURE_REJECTED: FTM responder rejected measurement
- * @NL80211_PMSR_FTM_FAILURE_WRONG_CHANNEL: we already know the peer is
- * on a different channel, so can't measure (if we didn't know, we'd
- * try and get no response)
- * @NL80211_PMSR_FTM_FAILURE_PEER_NOT_CAPABLE: peer can't actually do FTM
- * @NL80211_PMSR_FTM_FAILURE_INVALID_TIMESTAMP: invalid T1/T4 timestamps
- * received
- * @NL80211_PMSR_FTM_FAILURE_PEER_BUSY: peer reports busy, you may retry
- * later (see %NL80211_PMSR_FTM_RESP_ATTR_BUSY_RETRY_TIME)
- * @NL80211_PMSR_FTM_FAILURE_BAD_CHANGED_PARAMS: parameters were changed
- * by the peer and are no longer supported
- */
- enum nl80211_peer_measurement_ftm_failure_reasons {
- NL80211_PMSR_FTM_FAILURE_UNSPECIFIED,
- NL80211_PMSR_FTM_FAILURE_NO_RESPONSE,
- NL80211_PMSR_FTM_FAILURE_REJECTED,
- NL80211_PMSR_FTM_FAILURE_WRONG_CHANNEL,
- NL80211_PMSR_FTM_FAILURE_PEER_NOT_CAPABLE,
- NL80211_PMSR_FTM_FAILURE_INVALID_TIMESTAMP,
- NL80211_PMSR_FTM_FAILURE_PEER_BUSY,
- NL80211_PMSR_FTM_FAILURE_BAD_CHANGED_PARAMS,
- };
- /**
- * enum nl80211_peer_measurement_ftm_resp - FTM response attributes
- * @__NL80211_PMSR_FTM_RESP_ATTR_INVALID: invalid
- *
- * @NL80211_PMSR_FTM_RESP_ATTR_FAIL_REASON: FTM-specific failure reason
- * (u32, optional)
- * @NL80211_PMSR_FTM_RESP_ATTR_BURST_INDEX: optional, if bursts are reported
- * as separate results then it will be the burst index 0...(N-1) and
- * the top level will indicate partial results (u32)
- * @NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_ATTEMPTS: number of FTM Request frames
- * transmitted (u32, optional)
- * @NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_SUCCESSES: number of FTM Request frames
- * that were acknowleged (u32, optional)
- * @NL80211_PMSR_FTM_RESP_ATTR_BUSY_RETRY_TIME: retry time received from the
- * busy peer (u32, seconds)
- * @NL80211_PMSR_FTM_RESP_ATTR_NUM_BURSTS_EXP: actual number of bursts exponent
- * used by the responder (similar to request, u8)
- * @NL80211_PMSR_FTM_RESP_ATTR_BURST_DURATION: actual burst duration used by
- * the responder (similar to request, u8)
- * @NL80211_PMSR_FTM_RESP_ATTR_FTMS_PER_BURST: actual FTMs per burst used
- * by the responder (similar to request, u8)
- * @NL80211_PMSR_FTM_RESP_ATTR_RSSI_AVG: average RSSI across all FTM action
- * frames (optional, s32, 1/2 dBm)
- * @NL80211_PMSR_FTM_RESP_ATTR_RSSI_SPREAD: RSSI spread across all FTM action
- * frames (optional, s32, 1/2 dBm)
- * @NL80211_PMSR_FTM_RESP_ATTR_TX_RATE: bitrate we used for the response to the
- * FTM action frame (optional, nested, using &enum nl80211_rate_info
- * attributes)
- * @NL80211_PMSR_FTM_RESP_ATTR_RX_RATE: bitrate the responder used for the FTM
- * action frame (optional, nested, using &enum nl80211_rate_info attrs)
- * @NL80211_PMSR_FTM_RESP_ATTR_RTT_AVG: average RTT (s64, picoseconds, optional
- * but one of RTT/DIST must be present)
- * @NL80211_PMSR_FTM_RESP_ATTR_RTT_VARIANCE: RTT variance (u64, ps^2, note that
- * standard deviation is the square root of variance, optional)
- * @NL80211_PMSR_FTM_RESP_ATTR_RTT_SPREAD: RTT spread (u64, picoseconds,
- * optional)
- * @NL80211_PMSR_FTM_RESP_ATTR_DIST_AVG: average distance (s64, mm, optional
- * but one of RTT/DIST must be present)
- * @NL80211_PMSR_FTM_RESP_ATTR_DIST_VARIANCE: distance variance (u64, mm^2, note
- * that standard deviation is the square root of variance, optional)
- * @NL80211_PMSR_FTM_RESP_ATTR_DIST_SPREAD: distance spread (u64, mm, optional)
- * @NL80211_PMSR_FTM_RESP_ATTR_LCI: LCI data from peer (binary, optional);
- * this is the contents of the Measurement Report Element (802.11-2016
- * 9.4.2.22.1) starting with the Measurement Token, with Measurement
- * Type 8.
- * @NL80211_PMSR_FTM_RESP_ATTR_CIVICLOC: civic location data from peer
- * (binary, optional);
- * this is the contents of the Measurement Report Element (802.11-2016
- * 9.4.2.22.1) starting with the Measurement Token, with Measurement
- * Type 11.
- * @NL80211_PMSR_FTM_RESP_ATTR_PAD: ignore, for u64/s64 padding only
- *
- * @NUM_NL80211_PMSR_FTM_RESP_ATTR: internal
- * @NL80211_PMSR_FTM_RESP_ATTR_MAX: highest attribute number
- */
- enum nl80211_peer_measurement_ftm_resp {
- __NL80211_PMSR_FTM_RESP_ATTR_INVALID,
- NL80211_PMSR_FTM_RESP_ATTR_FAIL_REASON,
- NL80211_PMSR_FTM_RESP_ATTR_BURST_INDEX,
- NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_ATTEMPTS,
- NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_SUCCESSES,
- NL80211_PMSR_FTM_RESP_ATTR_BUSY_RETRY_TIME,
- NL80211_PMSR_FTM_RESP_ATTR_NUM_BURSTS_EXP,
- NL80211_PMSR_FTM_RESP_ATTR_BURST_DURATION,
- NL80211_PMSR_FTM_RESP_ATTR_FTMS_PER_BURST,
- NL80211_PMSR_FTM_RESP_ATTR_RSSI_AVG,
- NL80211_PMSR_FTM_RESP_ATTR_RSSI_SPREAD,
- NL80211_PMSR_FTM_RESP_ATTR_TX_RATE,
- NL80211_PMSR_FTM_RESP_ATTR_RX_RATE,
- NL80211_PMSR_FTM_RESP_ATTR_RTT_AVG,
- NL80211_PMSR_FTM_RESP_ATTR_RTT_VARIANCE,
- NL80211_PMSR_FTM_RESP_ATTR_RTT_SPREAD,
- NL80211_PMSR_FTM_RESP_ATTR_DIST_AVG,
- NL80211_PMSR_FTM_RESP_ATTR_DIST_VARIANCE,
- NL80211_PMSR_FTM_RESP_ATTR_DIST_SPREAD,
- NL80211_PMSR_FTM_RESP_ATTR_LCI,
- NL80211_PMSR_FTM_RESP_ATTR_CIVICLOC,
- NL80211_PMSR_FTM_RESP_ATTR_PAD,
- /* keep last */
- NUM_NL80211_PMSR_FTM_RESP_ATTR,
- NL80211_PMSR_FTM_RESP_ATTR_MAX = NUM_NL80211_PMSR_FTM_RESP_ATTR - 1
- };
- /**
- * enum nl80211_obss_pd_attributes - OBSS packet detection attributes
- * @__NL80211_HE_OBSS_PD_ATTR_INVALID: Invalid
- *
- * @NL80211_HE_OBSS_PD_ATTR_MIN_OFFSET: the OBSS PD minimum tx power offset.
- * @NL80211_HE_OBSS_PD_ATTR_MAX_OFFSET: the OBSS PD maximum tx power offset.
- * @NL80211_HE_OBSS_PD_ATTR_NON_SRG_MAX_OFFSET: the non-SRG OBSS PD maximum
- * tx power offset.
- * @NL80211_HE_OBSS_PD_ATTR_BSS_COLOR_BITMAP: bitmap that indicates the BSS color
- * values used by members of the SRG.
- * @NL80211_HE_OBSS_PD_ATTR_PARTIAL_BSSID_BITMAP: bitmap that indicates the partial
- * BSSID values used by members of the SRG.
- * @NL80211_HE_OBSS_PD_ATTR_SR_CTRL: The SR Control field of SRP element.
- *
- * @__NL80211_HE_OBSS_PD_ATTR_LAST: Internal
- * @NL80211_HE_OBSS_PD_ATTR_MAX: highest OBSS PD attribute.
- */
- enum nl80211_obss_pd_attributes {
- __NL80211_HE_OBSS_PD_ATTR_INVALID,
- NL80211_HE_OBSS_PD_ATTR_MIN_OFFSET,
- NL80211_HE_OBSS_PD_ATTR_MAX_OFFSET,
- NL80211_HE_OBSS_PD_ATTR_NON_SRG_MAX_OFFSET,
- NL80211_HE_OBSS_PD_ATTR_BSS_COLOR_BITMAP,
- NL80211_HE_OBSS_PD_ATTR_PARTIAL_BSSID_BITMAP,
- NL80211_HE_OBSS_PD_ATTR_SR_CTRL,
- /* keep last */
- __NL80211_HE_OBSS_PD_ATTR_LAST,
- NL80211_HE_OBSS_PD_ATTR_MAX = __NL80211_HE_OBSS_PD_ATTR_LAST - 1,
- };
- /**
- * enum nl80211_bss_color_attributes - BSS Color attributes
- * @__NL80211_HE_BSS_COLOR_ATTR_INVALID: Invalid
- *
- * @NL80211_HE_BSS_COLOR_ATTR_COLOR: the current BSS Color.
- * @NL80211_HE_BSS_COLOR_ATTR_DISABLED: is BSS coloring disabled.
- * @NL80211_HE_BSS_COLOR_ATTR_PARTIAL: the AID equation to be used..
- *
- * @__NL80211_HE_BSS_COLOR_ATTR_LAST: Internal
- * @NL80211_HE_BSS_COLOR_ATTR_MAX: highest BSS Color attribute.
- */
- enum nl80211_bss_color_attributes {
- __NL80211_HE_BSS_COLOR_ATTR_INVALID,
- NL80211_HE_BSS_COLOR_ATTR_COLOR,
- NL80211_HE_BSS_COLOR_ATTR_DISABLED,
- NL80211_HE_BSS_COLOR_ATTR_PARTIAL,
- /* keep last */
- __NL80211_HE_BSS_COLOR_ATTR_LAST,
- NL80211_HE_BSS_COLOR_ATTR_MAX = __NL80211_HE_BSS_COLOR_ATTR_LAST - 1,
- };
- /**
- * enum nl80211_iftype_akm_attributes - interface type AKM attributes
- * @__NL80211_IFTYPE_AKM_ATTR_INVALID: Invalid
- *
- * @NL80211_IFTYPE_AKM_ATTR_IFTYPES: nested attribute containing a flag
- * attribute for each interface type that supports AKM suites specified in
- * %NL80211_IFTYPE_AKM_ATTR_SUITES
- * @NL80211_IFTYPE_AKM_ATTR_SUITES: an array of u32. Used to indicate supported
- * AKM suites for the specified interface types.
- *
- * @__NL80211_IFTYPE_AKM_ATTR_LAST: Internal
- * @NL80211_IFTYPE_AKM_ATTR_MAX: highest interface type AKM attribute.
- */
- enum nl80211_iftype_akm_attributes {
- __NL80211_IFTYPE_AKM_ATTR_INVALID,
- NL80211_IFTYPE_AKM_ATTR_IFTYPES,
- NL80211_IFTYPE_AKM_ATTR_SUITES,
- /* keep last */
- __NL80211_IFTYPE_AKM_ATTR_LAST,
- NL80211_IFTYPE_AKM_ATTR_MAX = __NL80211_IFTYPE_AKM_ATTR_LAST - 1,
- };
- /**
- * enum nl80211_fils_discovery_attributes - FILS discovery configuration
- * from IEEE Std 802.11ai-2016, Annex C.3 MIB detail.
- *
- * @__NL80211_FILS_DISCOVERY_ATTR_INVALID: Invalid
- *
- * @NL80211_FILS_DISCOVERY_ATTR_INT_MIN: Minimum packet interval (u32, TU).
- * Allowed range: 0..10000 (TU = Time Unit)
- * @NL80211_FILS_DISCOVERY_ATTR_INT_MAX: Maximum packet interval (u32, TU).
- * Allowed range: 0..10000 (TU = Time Unit)
- * @NL80211_FILS_DISCOVERY_ATTR_TMPL: Template data for FILS discovery action
- * frame including the headers.
- *
- * @__NL80211_FILS_DISCOVERY_ATTR_LAST: Internal
- * @NL80211_FILS_DISCOVERY_ATTR_MAX: highest attribute
- */
- enum nl80211_fils_discovery_attributes {
- __NL80211_FILS_DISCOVERY_ATTR_INVALID,
- NL80211_FILS_DISCOVERY_ATTR_INT_MIN,
- NL80211_FILS_DISCOVERY_ATTR_INT_MAX,
- NL80211_FILS_DISCOVERY_ATTR_TMPL,
- /* keep last */
- __NL80211_FILS_DISCOVERY_ATTR_LAST,
- NL80211_FILS_DISCOVERY_ATTR_MAX = __NL80211_FILS_DISCOVERY_ATTR_LAST - 1
- };
- /*
- * FILS discovery template minimum length with action frame headers and
- * mandatory fields.
- */
- #define NL80211_FILS_DISCOVERY_TMPL_MIN_LEN 42
- /**
- * enum nl80211_unsol_bcast_probe_resp_attributes - Unsolicited broadcast probe
- * response configuration. Applicable only in 6GHz.
- *
- * @__NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INVALID: Invalid
- *
- * @NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INT: Maximum packet interval (u32, TU).
- * Allowed range: 0..20 (TU = Time Unit). IEEE P802.11ax/D6.0
- * 26.17.2.3.2 (AP behavior for fast passive scanning).
- * @NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_TMPL: Unsolicited broadcast probe response
- * frame template (binary).
- *
- * @__NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_LAST: Internal
- * @NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_MAX: highest attribute
- */
- enum nl80211_unsol_bcast_probe_resp_attributes {
- __NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INVALID,
- NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INT,
- NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_TMPL,
- /* keep last */
- __NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_LAST,
- NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_MAX =
- __NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_LAST - 1
- };
- /**
- * enum nl80211_sae_pwe_mechanism - The mechanism(s) allowed for SAE PWE
- * derivation. Applicable only when WPA3-Personal SAE authentication is
- * used.
- *
- * @NL80211_SAE_PWE_UNSPECIFIED: not specified, used internally to indicate that
- * attribute is not present from userspace.
- * @NL80211_SAE_PWE_HUNT_AND_PECK: hunting-and-pecking loop only
- * @NL80211_SAE_PWE_HASH_TO_ELEMENT: hash-to-element only
- * @NL80211_SAE_PWE_BOTH: both hunting-and-pecking loop and hash-to-element
- * can be used.
- */
- enum nl80211_sae_pwe_mechanism {
- NL80211_SAE_PWE_UNSPECIFIED,
- NL80211_SAE_PWE_HUNT_AND_PECK,
- NL80211_SAE_PWE_HASH_TO_ELEMENT,
- NL80211_SAE_PWE_BOTH,
- };
- /**
- * enum nl80211_sar_type - type of SAR specs
- *
- * @NL80211_SAR_TYPE_POWER: power limitation specified in 0.25dBm unit
- *
- */
- enum nl80211_sar_type {
- NL80211_SAR_TYPE_POWER,
- /* add new type here */
- /* Keep last */
- NUM_NL80211_SAR_TYPE,
- };
- /**
- * enum nl80211_sar_attrs - Attributes for SAR spec
- *
- * @NL80211_SAR_ATTR_TYPE: the SAR type as defined in &enum nl80211_sar_type.
- *
- * @NL80211_SAR_ATTR_SPECS: Nested array of SAR power
- * limit specifications. Each specification contains a set
- * of %nl80211_sar_specs_attrs.
- *
- * For SET operation, it contains array of %NL80211_SAR_ATTR_SPECS_POWER
- * and %NL80211_SAR_ATTR_SPECS_RANGE_INDEX.
- *
- * For sar_capa dump, it contains array of
- * %NL80211_SAR_ATTR_SPECS_START_FREQ
- * and %NL80211_SAR_ATTR_SPECS_END_FREQ.
- *
- * @__NL80211_SAR_ATTR_LAST: Internal
- * @NL80211_SAR_ATTR_MAX: highest sar attribute
- *
- * These attributes are used with %NL80211_CMD_SET_SAR_SPEC
- */
- enum nl80211_sar_attrs {
- __NL80211_SAR_ATTR_INVALID,
- NL80211_SAR_ATTR_TYPE,
- NL80211_SAR_ATTR_SPECS,
- __NL80211_SAR_ATTR_LAST,
- NL80211_SAR_ATTR_MAX = __NL80211_SAR_ATTR_LAST - 1,
- };
- /**
- * enum nl80211_sar_specs_attrs - Attributes for SAR power limit specs
- *
- * @NL80211_SAR_ATTR_SPECS_POWER: Required (s32)value to specify the actual
- * power limit value in units of 0.25 dBm if type is
- * NL80211_SAR_TYPE_POWER. (i.e., a value of 44 represents 11 dBm).
- * 0 means userspace doesn't have SAR limitation on this associated range.
- *
- * @NL80211_SAR_ATTR_SPECS_RANGE_INDEX: Required (u32) value to specify the
- * index of exported freq range table and the associated power limitation
- * is applied to this range.
- *
- * Userspace isn't required to set all the ranges advertised by WLAN driver,
- * and userspace can skip some certain ranges. These skipped ranges don't
- * have SAR limitations, and they are same as setting the
- * %NL80211_SAR_ATTR_SPECS_POWER to any unreasonable high value because any
- * value higher than regulatory allowed value just means SAR power
- * limitation is removed, but it's required to set at least one range.
- * It's not allowed to set duplicated range in one SET operation.
- *
- * Every SET operation overwrites previous SET operation.
- *
- * @NL80211_SAR_ATTR_SPECS_START_FREQ: Required (u32) value to specify the start
- * frequency of this range edge when registering SAR capability to wiphy.
- * It's not a channel center frequency. The unit is kHz.
- *
- * @NL80211_SAR_ATTR_SPECS_END_FREQ: Required (u32) value to specify the end
- * frequency of this range edge when registering SAR capability to wiphy.
- * It's not a channel center frequency. The unit is kHz.
- *
- * @__NL80211_SAR_ATTR_SPECS_LAST: Internal
- * @NL80211_SAR_ATTR_SPECS_MAX: highest sar specs attribute
- */
- enum nl80211_sar_specs_attrs {
- __NL80211_SAR_ATTR_SPECS_INVALID,
- NL80211_SAR_ATTR_SPECS_POWER,
- NL80211_SAR_ATTR_SPECS_RANGE_INDEX,
- NL80211_SAR_ATTR_SPECS_START_FREQ,
- NL80211_SAR_ATTR_SPECS_END_FREQ,
- __NL80211_SAR_ATTR_SPECS_LAST,
- NL80211_SAR_ATTR_SPECS_MAX = __NL80211_SAR_ATTR_SPECS_LAST - 1,
- };
- #endif /* __LINUX_NL80211_H */
|