|
@@ -0,0 +1,40 @@
|
|
|
+# Issue template:
|
|
|
+1. Please make sure that the issue subject starts with `<package-name>:`
|
|
|
+2. Issues related to end of life (EOL) releases are not supported or maintained and will be closed
|
|
|
+3. Remove lines from top till here and fill in the following questions
|
|
|
+***
|
|
|
+
|
|
|
+## Steps to reproduce:
|
|
|
+**Example: Replace the following lines and remove this**
|
|
|
+
|
|
|
+1. go to: Network → Interfaces → LAN (an interface with a static address) → DHCP server tab → IPv6 RA settings tab
|
|
|
+2. set RA MTU and RA Hop Limit to arbitrary non-default value
|
|
|
+3. Save & Apply
|
|
|
+4. go to: IPv6 RA settings tab again
|
|
|
+
|
|
|
+## Actual behavior:
|
|
|
+**Example: Replace the following lines and remove this**
|
|
|
+
|
|
|
+1. option ra_mtu '1500' is set correctly in /etc/config/dhcp
|
|
|
+2. In LuCI though, RA MTU and RA Hop Limit are still displaying the default values in light gray font color.
|
|
|
+
|
|
|
+## Expected behavior:
|
|
|
+**Example: Replace the following lines and remove this**
|
|
|
+
|
|
|
+```
|
|
|
+RA MTU and RA Hop Limit are displaying the correct values found in /etc/config/dhcp in black font color.
|
|
|
+```
|
|
|
+
|
|
|
+## Additional Information:
|
|
|
+OpenWrt version information from system `/etc/openwrt_release`
|
|
|
+
|
|
|
+**Example: Replace the following lines and remove this**
|
|
|
+```
|
|
|
+DISTRIB_ID='OpenWrt'
|
|
|
+DISTRIB_RELEASE='21.02.0-rc4'
|
|
|
+DISTRIB_REVISION='r16256-2d5ee43dc6'
|
|
|
+DISTRIB_TARGET='x86/64'
|
|
|
+DISTRIB_ARCH='x86_64'
|
|
|
+DISTRIB_DESCRIPTION='OpenWrt 21.02.0-rc4 r16256-2d5ee43dc6'
|
|
|
+DISTRIB_TAINTS=''
|
|
|
+```
|