luci/applications/luci-app-meshwizard/po/zh-cn/meshwizard.po

#
# Yangfl <mmyangfl@gmail.com>, 2018.
#
msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2012-09-24 18:01+0200\n"
"PO-Revision-Date: 2018-08-07 19:18+0800\n"
"Last-Translator: Yangfl <mmyangfl@gmail.com>\n"
"Language-Team:  <debian-l10n-chinese@lists.debian.org>\n"
"Language: zh_CN\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"
"X-Generator: Gtranslator 2.91.7\n"

#: applications/luci-app-meshwizard/luasrc/model/cbi/freifunk/meshwizard.lua:191
msgid "Activate or deactivate IPv6 config globally."
msgstr "启用或停用全局 IPv6 设置"

#: applications/luci-app-meshwizard/luasrc/model/cbi/freifunk/meshwizard.lua:112
msgid "Channel"
msgstr "信道"

#: applications/luci-app-meshwizard/luasrc/model/cbi/freifunk/meshwizard.lua:181
msgid "Check this to protect your LAN from other nodes or clients"
msgstr "选择此项，隔离其他节点或客户端的攻击来保护您的局域网"

#: applications/luci-app-meshwizard/luasrc/model/cbi/freifunk/meshwizard.lua:176
msgid "Cleanup config"
msgstr "清空配置"

#: applications/luci-app-meshwizard/luasrc/model/cbi/freifunk/meshwizard.lua:24
msgid "Configure this interface"
msgstr "配置当前界面"

#: applications/luci-app-meshwizard/luasrc/model/cbi/freifunk/meshwizard.lua:67
msgid "DHCP IP range"
msgstr "DHCP IP 范围"

#: applications/luci-app-meshwizard/luasrc/model/cbi/freifunk/meshwizard.lua:54
msgid "DHCP will automatically assign ip addresses to clients"
msgstr "DHCP 将自动给客户端分配 IP 地址"

#: applications/luci-app-meshwizard/luasrc/model/cbi/freifunk/meshwizard.lua:53
msgid "Enable DHCP"
msgstr "启动 DHCP"

#: applications/luci-app-meshwizard/luasrc/model/cbi/freifunk/meshwizard.lua:60
msgid "Enable RA"
msgstr "启用 RA"

#: applications/luci-app-meshwizard/luasrc/model/cbi/freifunk/meshwizard.lua:190
msgid "Enabled"
msgstr "启用"

#: applications/luci-app-meshwizard/luasrc/model/cbi/freifunk/meshwizard.lua:173
msgid "General Settings"
msgstr "常规设置"

#: applications/luci-app-meshwizard/luasrc/model/cbi/freifunk/meshwizard.lua:189
msgid "IPv6 Settings"
msgstr "IPv6 设置"

#: applications/luci-app-meshwizard/luasrc/model/cbi/freifunk/meshwizard.lua:177
msgid ""
"If this is selected then config is cleaned before setting new config options."
msgstr "如果选中此项，在设置新选项之前，配置将被清空。"

#: applications/luci-app-meshwizard/luasrc/model/cbi/freifunk/meshwizard.lua:18
msgid "Interfaces"
msgstr "界面"

#: applications/luci-app-meshwizard/luasrc/model/cbi/freifunk/meshwizard.lua:29
msgid "Mesh IP address"
msgstr "Mesh IP 地址"

#: applications/luci-app-meshwizard/luasrc/model/cbi/freifunk/meshwizard.lua:45
msgid "Mesh IPv6 address"
msgstr "Mesh IPv6 地址"

#: applications/luci-app-meshwizard/luasrc/controller/meshwizard.lua:7
msgid "Mesh Wizard"
msgstr "Mesh 向导"

#: applications/luci-app-meshwizard/luasrc/model/cbi/freifunk/meshwizard.lua:25
msgid ""
"Note: this will set up this interface for mesh operation, i.e. add it to "
"zone 'freifunk' and enable olsr."
msgstr ""
"注意：这将为 mesh 操作建立一个接口，如：添加到“freifunk”区域并启用 olsr"

#: applications/luci-app-meshwizard/luasrc/model/cbi/freifunk/meshwizard.lua:180
msgid "Protect LAN"
msgstr "保护 LAN 口"

#: applications/luci-app-meshwizard/luasrc/model/cbi/freifunk/meshwizard.lua:184
msgid ""
"Select this to allow others to use your connection to access the internet."
msgstr "选择此项以允许其他人使用您的连接访问互联网。"

#: applications/luci-app-meshwizard/luasrc/model/cbi/freifunk/meshwizard.lua:61
msgid "Send router advertisements on this device."
msgstr "在此设备上发送路由广播。"

#: applications/luci-app-meshwizard/luasrc/model/cbi/freifunk/meshwizard.lua:183
msgid "Share your internet connection"
msgstr "分享您的互联网连接"

#: applications/luci-app-meshwizard/luasrc/model/cbi/freifunk/meshwizard.lua:68
msgid ""
"The IP range from which clients are assigned ip addresses (e.g. "
"10.1.2.1/28). If this is a range inside your mesh network range, then it "
"will be announced as HNA. Any other range will use NAT. If left empty then "
"the defaults from the community profile will be used."
msgstr ""
"给客户端分配的 IP 地址范围（如 10.1.2.1/28）。如果此范围位于您的网状网络范围"
"内，那么它将被通告为 HNA。任何其他范围将使用 NAT。如果留空，则将使用社区个人"
"资料中的默认值。"

#: applications/luci-app-meshwizard/luasrc/model/cbi/freifunk/meshwizard.lua:38
msgid "The given IP address is not inside the mesh network range"
msgstr "给定的 IP 地址不在网状网络范围内"

#: applications/luci-app-meshwizard/luasrc/model/cbi/freifunk/meshwizard.lua:46
msgid ""
"This is a unique IPv6 address in CIDR notation (e.g. 2001:1:2:3::1/64) and "
"has to be registered at your local community."
msgstr ""
"这是唯一 IPv6 地址，以 CIDR 表示（例如 2001:1:2:3::1/64），必须在您的当地社区"
"注册。"

#: applications/luci-app-meshwizard/luasrc/model/cbi/freifunk/meshwizard.lua:30
msgid ""
"This is a unique address in the mesh (e.g. 10.1.1.1) and has to be "
"registered at your local community."
msgstr "这是网状网中的唯一地址（例如 10.1.1.1），必须在您的当地社区注册。"

#: applications/luci-app-meshwizard/luasrc/model/cbi/freifunk/meshwizard.lua:149
msgid "This will setup a new virtual wireless interface in Access Point mode."
msgstr "这将在接入点模式下设置新的虚拟无线接口。"

#: applications/luci-app-meshwizard/luasrc/model/cbi/freifunk/meshwizard.lua:15
msgid ""
"This wizard will assist you in setting up your router for Freifunk or "
"another similar wireless community network."
msgstr "该向导将帮助您为 Freifunk 或其他类似的无线社区网络设置路由器。"

#: applications/luci-app-meshwizard/luasrc/model/cbi/freifunk/meshwizard.lua:148
msgid "Virtual Access Point (VAP)"
msgstr "虚拟接入点（VAP）"

#: applications/luci-app-meshwizard/luasrc/model/cbi/freifunk/meshwizard.lua:15
msgid "Wizard"
msgstr "向导"

#: applications/luci-app-meshwizard/luasrc/model/cbi/freifunk/meshwizard.lua:113
msgid "Your device and neighbouring nodes have to use the same channel."
msgstr "您的设备和相邻节点必须使用相同的信道。"

#: applications/luci-app-meshwizard/luasrc/model/cbi/freifunk/meshwizard.lua:181
msgid "recommended"
msgstr "推荐"