2
0

minetest.conf.example 100 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586878889909192939495969798991001011021031041051061071081091101111121131141151161171181191201211221231241251261271281291301311321331341351361371381391401411421431441451461471481491501511521531541551561571581591601611621631641651661671681691701711721731741751761771781791801811821831841851861871881891901911921931941951961971981992002012022032042052062072082092102112122132142152162172182192202212222232242252262272282292302312322332342352362372382392402412422432442452462472482492502512522532542552562572582592602612622632642652662672682692702712722732742752762772782792802812822832842852862872882892902912922932942952962972982993003013023033043053063073083093103113123133143153163173183193203213223233243253263273283293303313323333343353363373383393403413423433443453463473483493503513523533543553563573583593603613623633643653663673683693703713723733743753763773783793803813823833843853863873883893903913923933943953963973983994004014024034044054064074084094104114124134144154164174184194204214224234244254264274284294304314324334344354364374384394404414424434444454464474484494504514524534544554564574584594604614624634644654664674684694704714724734744754764774784794804814824834844854864874884894904914924934944954964974984995005015025035045055065075085095105115125135145155165175185195205215225235245255265275285295305315325335345355365375385395405415425435445455465475485495505515525535545555565575585595605615625635645655665675685695705715725735745755765775785795805815825835845855865875885895905915925935945955965975985996006016026036046056066076086096106116126136146156166176186196206216226236246256266276286296306316326336346356366376386396406416426436446456466476486496506516526536546556566576586596606616626636646656666676686696706716726736746756766776786796806816826836846856866876886896906916926936946956966976986997007017027037047057067077087097107117127137147157167177187197207217227237247257267277287297307317327337347357367377387397407417427437447457467477487497507517527537547557567577587597607617627637647657667677687697707717727737747757767777787797807817827837847857867877887897907917927937947957967977987998008018028038048058068078088098108118128138148158168178188198208218228238248258268278288298308318328338348358368378388398408418428438448458468478488498508518528538548558568578588598608618628638648658668678688698708718728738748758768778788798808818828838848858868878888898908918928938948958968978988999009019029039049059069079089099109119129139149159169179189199209219229239249259269279289299309319329339349359369379389399409419429439449459469479489499509519529539549559569579589599609619629639649659669679689699709719729739749759769779789799809819829839849859869879889899909919929939949959969979989991000100110021003100410051006100710081009101010111012101310141015101610171018101910201021102210231024102510261027102810291030103110321033103410351036103710381039104010411042104310441045104610471048104910501051105210531054105510561057105810591060106110621063106410651066106710681069107010711072107310741075107610771078107910801081108210831084108510861087108810891090109110921093109410951096109710981099110011011102110311041105110611071108110911101111111211131114111511161117111811191120112111221123112411251126112711281129113011311132113311341135113611371138113911401141114211431144114511461147114811491150115111521153115411551156115711581159116011611162116311641165116611671168116911701171117211731174117511761177117811791180118111821183118411851186118711881189119011911192119311941195119611971198119912001201120212031204120512061207120812091210121112121213121412151216121712181219122012211222122312241225122612271228122912301231123212331234123512361237123812391240124112421243124412451246124712481249125012511252125312541255125612571258125912601261126212631264126512661267126812691270127112721273127412751276127712781279128012811282128312841285128612871288128912901291129212931294129512961297129812991300130113021303130413051306130713081309131013111312131313141315131613171318131913201321132213231324132513261327132813291330133113321333133413351336133713381339134013411342134313441345134613471348134913501351135213531354135513561357135813591360136113621363136413651366136713681369137013711372137313741375137613771378137913801381138213831384138513861387138813891390139113921393139413951396139713981399140014011402140314041405140614071408140914101411141214131414141514161417141814191420142114221423142414251426142714281429143014311432143314341435143614371438143914401441144214431444144514461447144814491450145114521453145414551456145714581459146014611462146314641465146614671468146914701471147214731474147514761477147814791480148114821483148414851486148714881489149014911492149314941495149614971498149915001501150215031504150515061507150815091510151115121513151415151516151715181519152015211522152315241525152615271528152915301531153215331534153515361537153815391540154115421543154415451546154715481549155015511552155315541555155615571558155915601561156215631564156515661567156815691570157115721573157415751576157715781579158015811582158315841585158615871588158915901591159215931594159515961597159815991600160116021603160416051606160716081609161016111612161316141615161616171618161916201621162216231624162516261627162816291630163116321633163416351636163716381639164016411642164316441645164616471648164916501651165216531654165516561657165816591660166116621663166416651666166716681669167016711672167316741675167616771678167916801681168216831684168516861687168816891690169116921693169416951696169716981699170017011702170317041705170617071708170917101711171217131714171517161717171817191720172117221723172417251726172717281729173017311732173317341735173617371738173917401741174217431744174517461747174817491750175117521753175417551756175717581759176017611762176317641765176617671768176917701771177217731774177517761777177817791780178117821783178417851786178717881789179017911792179317941795179617971798179918001801180218031804180518061807180818091810181118121813181418151816181718181819182018211822182318241825182618271828182918301831183218331834183518361837183818391840184118421843184418451846184718481849185018511852185318541855185618571858185918601861186218631864186518661867186818691870187118721873187418751876187718781879188018811882188318841885188618871888188918901891189218931894189518961897189818991900190119021903190419051906190719081909191019111912191319141915191619171918191919201921192219231924192519261927192819291930193119321933193419351936193719381939194019411942194319441945194619471948194919501951195219531954195519561957195819591960196119621963196419651966196719681969197019711972197319741975197619771978197919801981198219831984198519861987198819891990199119921993199419951996199719981999200020012002200320042005200620072008200920102011201220132014201520162017201820192020202120222023202420252026202720282029203020312032203320342035203620372038203920402041204220432044204520462047204820492050205120522053205420552056205720582059206020612062206320642065206620672068206920702071207220732074207520762077207820792080208120822083208420852086208720882089209020912092209320942095209620972098209921002101210221032104210521062107210821092110211121122113211421152116211721182119212021212122212321242125212621272128212921302131213221332134213521362137213821392140214121422143214421452146214721482149215021512152215321542155215621572158215921602161216221632164216521662167216821692170217121722173217421752176217721782179218021812182218321842185218621872188218921902191219221932194219521962197219821992200220122022203220422052206220722082209221022112212221322142215221622172218221922202221222222232224222522262227222822292230223122322233223422352236223722382239224022412242224322442245224622472248224922502251225222532254225522562257225822592260226122622263226422652266226722682269227022712272227322742275227622772278227922802281228222832284228522862287228822892290229122922293229422952296229722982299230023012302230323042305230623072308230923102311231223132314231523162317231823192320232123222323232423252326232723282329233023312332233323342335233623372338233923402341234223432344234523462347234823492350235123522353235423552356235723582359236023612362236323642365236623672368236923702371237223732374237523762377237823792380238123822383238423852386238723882389239023912392239323942395239623972398239924002401240224032404240524062407240824092410241124122413241424152416241724182419242024212422242324242425242624272428242924302431243224332434243524362437243824392440244124422443244424452446244724482449245024512452245324542455245624572458245924602461246224632464246524662467246824692470247124722473247424752476247724782479248024812482248324842485248624872488248924902491249224932494249524962497249824992500250125022503250425052506250725082509251025112512251325142515251625172518251925202521252225232524252525262527252825292530253125322533253425352536253725382539254025412542254325442545254625472548254925502551255225532554255525562557255825592560256125622563256425652566256725682569257025712572257325742575257625772578257925802581258225832584258525862587258825892590259125922593259425952596259725982599260026012602260326042605260626072608260926102611261226132614261526162617261826192620262126222623262426252626262726282629263026312632263326342635263626372638263926402641264226432644264526462647264826492650265126522653265426552656265726582659266026612662266326642665266626672668266926702671267226732674267526762677267826792680268126822683268426852686268726882689269026912692269326942695269626972698269927002701270227032704270527062707270827092710271127122713271427152716271727182719272027212722272327242725272627272728272927302731273227332734273527362737273827392740274127422743274427452746274727482749275027512752275327542755275627572758275927602761276227632764276527662767276827692770277127722773277427752776277727782779278027812782278327842785278627872788278927902791279227932794279527962797279827992800280128022803280428052806280728082809281028112812281328142815281628172818281928202821282228232824282528262827282828292830283128322833283428352836283728382839284028412842284328442845284628472848284928502851285228532854285528562857285828592860286128622863286428652866286728682869287028712872287328742875287628772878287928802881288228832884288528862887288828892890289128922893289428952896289728982899290029012902290329042905290629072908290929102911291229132914291529162917291829192920292129222923292429252926292729282929293029312932293329342935293629372938293929402941294229432944294529462947294829492950295129522953295429552956295729582959296029612962296329642965296629672968296929702971297229732974297529762977297829792980298129822983298429852986298729882989299029912992299329942995299629972998299930003001300230033004300530063007300830093010301130123013301430153016301730183019302030213022302330243025302630273028302930303031303230333034303530363037303830393040304130423043304430453046304730483049305030513052305330543055305630573058305930603061306230633064306530663067306830693070307130723073307430753076307730783079308030813082308330843085308630873088308930903091309230933094309530963097309830993100310131023103310431053106310731083109311031113112311331143115311631173118311931203121312231233124312531263127312831293130313131323133313431353136313731383139314031413142314331443145314631473148314931503151315231533154315531563157315831593160316131623163316431653166316731683169317031713172317331743175317631773178317931803181318231833184318531863187318831893190319131923193319431953196319731983199320032013202320332043205320632073208320932103211321232133214321532163217321832193220322132223223322432253226322732283229323032313232323332343235323632373238323932403241324232433244324532463247324832493250325132523253325432553256325732583259326032613262326332643265326632673268326932703271327232733274327532763277327832793280328132823283328432853286328732883289329032913292329332943295329632973298329933003301330233033304330533063307330833093310331133123313331433153316331733183319332033213322332333243325332633273328332933303331333233333334333533363337333833393340334133423343334433453346334733483349335033513352335333543355335633573358335933603361336233633364336533663367336833693370337133723373337433753376337733783379338033813382338333843385338633873388338933903391339233933394339533963397
  1. # This file contains a list of all available settings and their default value for minetest.conf
  2. # By default, all the settings are commented and not functional.
  3. # Uncomment settings by removing the preceding #.
  4. # minetest.conf is read by default from:
  5. # ../minetest.conf
  6. # ../../minetest.conf
  7. # Any other path can be chosen by passing the path as a parameter
  8. # to the program, eg. "minetest.exe --config ../minetest.conf.example".
  9. # Further documentation:
  10. # http://wiki.minetest.net/
  11. #
  12. # Controls
  13. #
  14. # If enabled, you can place blocks at the position (feet + eye level) where you stand.
  15. # This is helpful when working with nodeboxes in small areas.
  16. # type: bool
  17. # enable_build_where_you_stand = false
  18. # Player is able to fly without being affected by gravity.
  19. # This requires the "fly" privilege on the server.
  20. # type: bool
  21. # free_move = false
  22. # If enabled, makes move directions relative to the player's pitch when flying or swimming.
  23. # type: bool
  24. # pitch_move = false
  25. # Fast movement (via the "special" key).
  26. # This requires the "fast" privilege on the server.
  27. # type: bool
  28. # fast_move = false
  29. # If enabled together with fly mode, player is able to fly through solid nodes.
  30. # This requires the "noclip" privilege on the server.
  31. # type: bool
  32. # noclip = false
  33. # Smooths camera when looking around. Also called look or mouse smoothing.
  34. # Useful for recording videos.
  35. # type: bool
  36. # cinematic = false
  37. # Smooths rotation of camera. 0 to disable.
  38. # type: float min: 0 max: 0.99
  39. # camera_smoothing = 0.0
  40. # Smooths rotation of camera in cinematic mode. 0 to disable.
  41. # type: float min: 0 max: 0.99
  42. # cinematic_camera_smoothing = 0.7
  43. # Invert vertical mouse movement.
  44. # type: bool
  45. # invert_mouse = false
  46. # Mouse sensitivity multiplier.
  47. # type: float
  48. # mouse_sensitivity = 0.2
  49. # If enabled, "special" key instead of "sneak" key is used for climbing down and
  50. # descending.
  51. # type: bool
  52. # aux1_descends = false
  53. # Double-tapping the jump key toggles fly mode.
  54. # type: bool
  55. # doubletap_jump = false
  56. # If disabled, "special" key is used to fly fast if both fly and fast mode are
  57. # enabled.
  58. # type: bool
  59. # always_fly_fast = true
  60. # The time in seconds it takes between repeated node placements when holding
  61. # the place button.
  62. # type: float min: 0.001
  63. # repeat_place_time = 0.25
  64. # Automatically jump up single-node obstacles.
  65. # type: bool
  66. # autojump = false
  67. # Prevent digging and placing from repeating when holding the mouse buttons.
  68. # Enable this when you dig or place too often by accident.
  69. # type: bool
  70. # safe_dig_and_place = false
  71. # Enable random user input (only used for testing).
  72. # type: bool
  73. # random_input = false
  74. # Continuous forward movement, toggled by autoforward key.
  75. # Press the autoforward key again or the backwards movement to disable.
  76. # type: bool
  77. # continuous_forward = false
  78. # The length in pixels it takes for touch screen interaction to start.
  79. # type: int min: 0 max: 100
  80. # touchscreen_threshold = 20
  81. # (Android) Fixes the position of virtual joystick.
  82. # If disabled, virtual joystick will center to first-touch's position.
  83. # type: bool
  84. # fixed_virtual_joystick = false
  85. # (Android) Use virtual joystick to trigger "aux" button.
  86. # If enabled, virtual joystick will also tap "aux" button when out of main circle.
  87. # type: bool
  88. # virtual_joystick_triggers_aux = false
  89. # Enable joysticks
  90. # type: bool
  91. # enable_joysticks = false
  92. # The identifier of the joystick to use
  93. # type: int
  94. # joystick_id = 0
  95. # The type of joystick
  96. # type: enum values: auto, generic, xbox
  97. # joystick_type = auto
  98. # The time in seconds it takes between repeated events
  99. # when holding down a joystick button combination.
  100. # type: float min: 0.001
  101. # repeat_joystick_button_time = 0.17
  102. # The deadzone of the joystick
  103. # type: int
  104. # joystick_deadzone = 2048
  105. # The sensitivity of the joystick axes for moving the
  106. # ingame view frustum around.
  107. # type: float
  108. # joystick_frustum_sensitivity = 170
  109. # Key for moving the player forward.
  110. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  111. # type: key
  112. # keymap_forward = KEY_KEY_W
  113. # Key for moving the player backward.
  114. # Will also disable autoforward, when active.
  115. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  116. # type: key
  117. # keymap_backward = KEY_KEY_S
  118. # Key for moving the player left.
  119. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  120. # type: key
  121. # keymap_left = KEY_KEY_A
  122. # Key for moving the player right.
  123. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  124. # type: key
  125. # keymap_right = KEY_KEY_D
  126. # Key for jumping.
  127. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  128. # type: key
  129. # keymap_jump = KEY_SPACE
  130. # Key for sneaking.
  131. # Also used for climbing down and descending in water if aux1_descends is disabled.
  132. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  133. # type: key
  134. # keymap_sneak = KEY_LSHIFT
  135. # Key for digging.
  136. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  137. # type: key
  138. # keymap_dig = KEY_LBUTTON
  139. # Key for placing.
  140. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  141. # type: key
  142. # keymap_place = KEY_RBUTTON
  143. # Key for opening the inventory.
  144. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  145. # type: key
  146. # keymap_inventory = KEY_KEY_I
  147. # Key for moving fast in fast mode.
  148. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  149. # type: key
  150. # keymap_special1 = KEY_KEY_E
  151. # Key for opening the chat window.
  152. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  153. # type: key
  154. # keymap_chat = KEY_KEY_T
  155. # Key for opening the chat window to type commands.
  156. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  157. # type: key
  158. # keymap_cmd = /
  159. # Key for opening the chat window to type local commands.
  160. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  161. # type: key
  162. # keymap_cmd_local = .
  163. # Key for toggling unlimited view range.
  164. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  165. # type: key
  166. # keymap_rangeselect = KEY_KEY_R
  167. # Key for toggling flying.
  168. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  169. # type: key
  170. # keymap_freemove = KEY_KEY_K
  171. # Key for toggling pitch move mode.
  172. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  173. # type: key
  174. # keymap_pitchmove = KEY_KEY_P
  175. # Key for toggling fast mode.
  176. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  177. # type: key
  178. # keymap_fastmove = KEY_KEY_J
  179. # Key for toggling noclip mode.
  180. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  181. # type: key
  182. # keymap_noclip = KEY_KEY_H
  183. # Key for selecting the next item in the hotbar.
  184. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  185. # type: key
  186. # keymap_hotbar_next = KEY_KEY_N
  187. # Key for selecting the previous item in the hotbar.
  188. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  189. # type: key
  190. # keymap_hotbar_previous = KEY_KEY_B
  191. # Key for muting the game.
  192. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  193. # type: key
  194. # keymap_mute = KEY_KEY_M
  195. # Key for increasing the volume.
  196. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  197. # type: key
  198. # keymap_increase_volume =
  199. # Key for decreasing the volume.
  200. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  201. # type: key
  202. # keymap_decrease_volume =
  203. # Key for toggling autoforward.
  204. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  205. # type: key
  206. # keymap_autoforward =
  207. # Key for toggling cinematic mode.
  208. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  209. # type: key
  210. # keymap_cinematic =
  211. # Key for toggling display of minimap.
  212. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  213. # type: key
  214. # keymap_minimap = KEY_KEY_V
  215. # Key for taking screenshots.
  216. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  217. # type: key
  218. # keymap_screenshot = KEY_F12
  219. # Key for dropping the currently selected item.
  220. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  221. # type: key
  222. # keymap_drop = KEY_KEY_Q
  223. # Key to use view zoom when possible.
  224. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  225. # type: key
  226. # keymap_zoom = KEY_KEY_Z
  227. # Key for selecting the first hotbar slot.
  228. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  229. # type: key
  230. # keymap_slot1 = KEY_KEY_1
  231. # Key for selecting the second hotbar slot.
  232. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  233. # type: key
  234. # keymap_slot2 = KEY_KEY_2
  235. # Key for selecting the third hotbar slot.
  236. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  237. # type: key
  238. # keymap_slot3 = KEY_KEY_3
  239. # Key for selecting the fourth hotbar slot.
  240. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  241. # type: key
  242. # keymap_slot4 = KEY_KEY_4
  243. # Key for selecting the fifth hotbar slot.
  244. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  245. # type: key
  246. # keymap_slot5 = KEY_KEY_5
  247. # Key for selecting the sixth hotbar slot.
  248. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  249. # type: key
  250. # keymap_slot6 = KEY_KEY_6
  251. # Key for selecting the seventh hotbar slot.
  252. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  253. # type: key
  254. # keymap_slot7 = KEY_KEY_7
  255. # Key for selecting the eighth hotbar slot.
  256. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  257. # type: key
  258. # keymap_slot8 = KEY_KEY_8
  259. # Key for selecting the ninth hotbar slot.
  260. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  261. # type: key
  262. # keymap_slot9 = KEY_KEY_9
  263. # Key for selecting the tenth hotbar slot.
  264. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  265. # type: key
  266. # keymap_slot10 = KEY_KEY_0
  267. # Key for selecting the 11th hotbar slot.
  268. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  269. # type: key
  270. # keymap_slot11 =
  271. # Key for selecting the 12th hotbar slot.
  272. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  273. # type: key
  274. # keymap_slot12 =
  275. # Key for selecting the 13th hotbar slot.
  276. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  277. # type: key
  278. # keymap_slot13 =
  279. # Key for selecting the 14th hotbar slot.
  280. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  281. # type: key
  282. # keymap_slot14 =
  283. # Key for selecting the 15th hotbar slot.
  284. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  285. # type: key
  286. # keymap_slot15 =
  287. # Key for selecting the 16th hotbar slot.
  288. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  289. # type: key
  290. # keymap_slot16 =
  291. # Key for selecting the 17th hotbar slot.
  292. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  293. # type: key
  294. # keymap_slot17 =
  295. # Key for selecting the 18th hotbar slot.
  296. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  297. # type: key
  298. # keymap_slot18 =
  299. # Key for selecting the 19th hotbar slot.
  300. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  301. # type: key
  302. # keymap_slot19 =
  303. # Key for selecting the 20th hotbar slot.
  304. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  305. # type: key
  306. # keymap_slot20 =
  307. # Key for selecting the 21st hotbar slot.
  308. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  309. # type: key
  310. # keymap_slot21 =
  311. # Key for selecting the 22nd hotbar slot.
  312. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  313. # type: key
  314. # keymap_slot22 =
  315. # Key for selecting the 23rd hotbar slot.
  316. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  317. # type: key
  318. # keymap_slot23 =
  319. # Key for selecting the 24th hotbar slot.
  320. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  321. # type: key
  322. # keymap_slot24 =
  323. # Key for selecting the 25th hotbar slot.
  324. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  325. # type: key
  326. # keymap_slot25 =
  327. # Key for selecting the 26th hotbar slot.
  328. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  329. # type: key
  330. # keymap_slot26 =
  331. # Key for selecting the 27th hotbar slot.
  332. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  333. # type: key
  334. # keymap_slot27 =
  335. # Key for selecting the 28th hotbar slot.
  336. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  337. # type: key
  338. # keymap_slot28 =
  339. # Key for selecting the 29th hotbar slot.
  340. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  341. # type: key
  342. # keymap_slot29 =
  343. # Key for selecting the 30th hotbar slot.
  344. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  345. # type: key
  346. # keymap_slot30 =
  347. # Key for selecting the 31st hotbar slot.
  348. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  349. # type: key
  350. # keymap_slot31 =
  351. # Key for selecting the 32nd hotbar slot.
  352. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  353. # type: key
  354. # keymap_slot32 =
  355. # Key for toggling the display of the HUD.
  356. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  357. # type: key
  358. # keymap_toggle_hud = KEY_F1
  359. # Key for toggling the display of chat.
  360. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  361. # type: key
  362. # keymap_toggle_chat = KEY_F2
  363. # Key for toggling the display of the large chat console.
  364. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  365. # type: key
  366. # keymap_console = KEY_F10
  367. # Key for toggling the display of fog.
  368. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  369. # type: key
  370. # keymap_toggle_force_fog_off = KEY_F3
  371. # Key for toggling the camera update. Only used for development
  372. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  373. # type: key
  374. # keymap_toggle_update_camera =
  375. # Key for toggling the display of debug info.
  376. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  377. # type: key
  378. # keymap_toggle_debug = KEY_F5
  379. # Key for toggling the display of the profiler. Used for development.
  380. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  381. # type: key
  382. # keymap_toggle_profiler = KEY_F6
  383. # Key for switching between first- and third-person camera.
  384. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  385. # type: key
  386. # keymap_camera_mode = KEY_KEY_C
  387. # Key for increasing the viewing range.
  388. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  389. # type: key
  390. # keymap_increase_viewing_range_min = +
  391. # Key for decreasing the viewing range.
  392. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
  393. # type: key
  394. # keymap_decrease_viewing_range_min = -
  395. #
  396. # Graphics
  397. #
  398. ## In-Game
  399. ### Basic
  400. # Enable vertex buffer objects.
  401. # This should greatly improve graphics performance.
  402. # type: bool
  403. # enable_vbo = true
  404. # Whether to fog out the end of the visible area.
  405. # type: bool
  406. # enable_fog = true
  407. # Leaves style:
  408. # - Fancy: all faces visible
  409. # - Simple: only outer faces, if defined special_tiles are used
  410. # - Opaque: disable transparency
  411. # type: enum values: fancy, simple, opaque
  412. # leaves_style = fancy
  413. # Connects glass if supported by node.
  414. # type: bool
  415. # connected_glass = false
  416. # Enable smooth lighting with simple ambient occlusion.
  417. # Disable for speed or for different looks.
  418. # type: bool
  419. # smooth_lighting = true
  420. # Clouds are a client side effect.
  421. # type: bool
  422. # enable_clouds = true
  423. # Use 3D cloud look instead of flat.
  424. # type: bool
  425. # enable_3d_clouds = true
  426. # Method used to highlight selected object.
  427. # type: enum values: box, halo, none
  428. # node_highlighting = box
  429. # Adds particles when digging a node.
  430. # type: bool
  431. # enable_particles = true
  432. ### Filtering
  433. # Use mip mapping to scale textures. May slightly increase performance,
  434. # especially when using a high resolution texture pack.
  435. # Gamma correct downscaling is not supported.
  436. # type: bool
  437. # mip_map = false
  438. # Use anisotropic filtering when viewing at textures from an angle.
  439. # type: bool
  440. # anisotropic_filter = false
  441. # Use bilinear filtering when scaling textures.
  442. # type: bool
  443. # bilinear_filter = false
  444. # Use trilinear filtering when scaling textures.
  445. # type: bool
  446. # trilinear_filter = false
  447. # Filtered textures can blend RGB values with fully-transparent neighbors,
  448. # which PNG optimizers usually discard, sometimes resulting in a dark or
  449. # light edge to transparent textures. Apply this filter to clean that up
  450. # at texture load time.
  451. # type: bool
  452. # texture_clean_transparent = false
  453. # When using bilinear/trilinear/anisotropic filters, low-resolution textures
  454. # can be blurred, so automatically upscale them with nearest-neighbor
  455. # interpolation to preserve crisp pixels. This sets the minimum texture size
  456. # for the upscaled textures; higher values look sharper, but require more
  457. # memory. Powers of 2 are recommended. Setting this higher than 1 may not
  458. # have a visible effect unless bilinear/trilinear/anisotropic filtering is
  459. # enabled.
  460. # This is also used as the base node texture size for world-aligned
  461. # texture autoscaling.
  462. # type: int
  463. # texture_min_size = 64
  464. # Use multi-sample antialiasing (MSAA) to smooth out block edges.
  465. # This algorithm smooths out the 3D viewport while keeping the image sharp,
  466. # but it doesn't affect the insides of textures
  467. # (which is especially noticeable with transparent textures).
  468. # Visible spaces appear between nodes when shaders are disabled.
  469. # If set to 0, MSAA is disabled.
  470. # A restart is required after changing this option.
  471. # type: enum values: 0, 1, 2, 4, 8, 16
  472. # fsaa = 0
  473. # Undersampling is similar to using a lower screen resolution, but it applies
  474. # to the game world only, keeping the GUI intact.
  475. # It should give a significant performance boost at the cost of less detailed image.
  476. # Higher values result in a less detailed image.
  477. # type: int min: 1 max: 8
  478. # undersampling = 1
  479. ### Shaders
  480. # Shaders allow advanced visual effects and may increase performance on some video
  481. # cards.
  482. # This only works with the OpenGL video backend.
  483. # type: bool
  484. # enable_shaders = true
  485. # Path to shader directory. If no path is defined, default location will be used.
  486. # type: path
  487. # shader_path =
  488. #### Tone Mapping
  489. # Enables Hable's 'Uncharted 2' filmic tone mapping.
  490. # Simulates the tone curve of photographic film and how this approximates the
  491. # appearance of high dynamic range images. Mid-range contrast is slightly
  492. # enhanced, highlights and shadows are gradually compressed.
  493. # type: bool
  494. # tone_mapping = false
  495. #### Waving Nodes
  496. # Set to true to enable waving liquids (like water).
  497. # Requires shaders to be enabled.
  498. # type: bool
  499. # enable_waving_water = false
  500. # The maximum height of the surface of waving liquids.
  501. # 4.0 = Wave height is two nodes.
  502. # 0.0 = Wave doesn't move at all.
  503. # Default is 1.0 (1/2 node).
  504. # Requires waving liquids to be enabled.
  505. # type: float min: 0 max: 4
  506. # water_wave_height = 1.0
  507. # Length of liquid waves.
  508. # Requires waving liquids to be enabled.
  509. # type: float min: 0.1
  510. # water_wave_length = 20.0
  511. # How fast liquid waves will move. Higher = faster.
  512. # If negative, liquid waves will move backwards.
  513. # Requires waving liquids to be enabled.
  514. # type: float
  515. # water_wave_speed = 5.0
  516. # Set to true to enable waving leaves.
  517. # Requires shaders to be enabled.
  518. # type: bool
  519. # enable_waving_leaves = false
  520. # Set to true to enable waving plants.
  521. # Requires shaders to be enabled.
  522. # type: bool
  523. # enable_waving_plants = false
  524. ### Advanced
  525. # Arm inertia, gives a more realistic movement of
  526. # the arm when the camera moves.
  527. # type: bool
  528. # arm_inertia = true
  529. # If FPS would go higher than this, limit it by sleeping
  530. # to not waste CPU power for no benefit.
  531. # type: int min: 1
  532. # fps_max = 60
  533. # Maximum FPS when the window is not focused, or when the game is paused.
  534. # type: int min: 1
  535. # fps_max_unfocused = 20
  536. # Open the pause menu when the window's focus is lost. Does not pause if a formspec is
  537. # open.
  538. # type: bool
  539. # pause_on_lost_focus = false
  540. # View distance in nodes.
  541. # type: int min: 20 max: 4000
  542. # viewing_range = 190
  543. # Camera 'near clipping plane' distance in nodes, between 0 and 0.25
  544. # Only works on GLES platforms. Most users will not need to change this.
  545. # Increasing can reduce artifacting on weaker GPUs.
  546. # 0.1 = Default, 0.25 = Good value for weaker tablets.
  547. # type: float min: 0 max: 0.25
  548. # near_plane = 0.1
  549. # Width component of the initial window size.
  550. # type: int min: 1
  551. # screen_w = 1024
  552. # Height component of the initial window size.
  553. # type: int min: 1
  554. # screen_h = 600
  555. # Save window size automatically when modified.
  556. # type: bool
  557. # autosave_screensize = true
  558. # Fullscreen mode.
  559. # type: bool
  560. # fullscreen = false
  561. # Bits per pixel (aka color depth) in fullscreen mode.
  562. # type: int
  563. # fullscreen_bpp = 24
  564. # Vertical screen synchronization.
  565. # type: bool
  566. # vsync = false
  567. # Field of view in degrees.
  568. # type: int min: 45 max: 160
  569. # fov = 72
  570. # Alters the light curve by applying 'gamma correction' to it.
  571. # Higher values make middle and lower light levels brighter.
  572. # Value '1.0' leaves the light curve unaltered.
  573. # This only has significant effect on daylight and artificial
  574. # light, it has very little effect on natural night light.
  575. # type: float min: 0.33 max: 3
  576. # display_gamma = 1.0
  577. # Gradient of light curve at minimum light level.
  578. # Controls the contrast of the lowest light levels.
  579. # type: float min: 0 max: 3
  580. # lighting_alpha = 0.0
  581. # Gradient of light curve at maximum light level.
  582. # Controls the contrast of the highest light levels.
  583. # type: float min: 0 max: 3
  584. # lighting_beta = 1.5
  585. # Strength of light curve boost.
  586. # The 3 'boost' parameters define a range of the light
  587. # curve that is boosted in brightness.
  588. # type: float min: 0 max: 0.4
  589. # lighting_boost = 0.2
  590. # Center of light curve boost range.
  591. # Where 0.0 is minimum light level, 1.0 is maximum light level.
  592. # type: float min: 0 max: 1
  593. # lighting_boost_center = 0.5
  594. # Spread of light curve boost range.
  595. # Controls the width of the range to be boosted.
  596. # Standard deviation of the light curve boost Gaussian.
  597. # type: float min: 0 max: 0.4
  598. # lighting_boost_spread = 0.2
  599. # Path to texture directory. All textures are first searched from here.
  600. # type: path
  601. # texture_path =
  602. # The rendering back-end for Irrlicht.
  603. # A restart is required after changing this.
  604. # Note: On Android, stick with OGLES1 if unsure! App may fail to start otherwise.
  605. # On other platforms, OpenGL is recommended.
  606. # Shaders are supported by OpenGL (desktop only) and OGLES2 (experimental)
  607. # type: enum values: null, software, burningsvideo, direct3d8, direct3d9, opengl, ogles1, ogles2
  608. # video_driver = opengl
  609. # Radius of cloud area stated in number of 64 node cloud squares.
  610. # Values larger than 26 will start to produce sharp cutoffs at cloud area corners.
  611. # type: int
  612. # cloud_radius = 12
  613. # Enable view bobbing and amount of view bobbing.
  614. # For example: 0 for no view bobbing; 1.0 for normal; 2.0 for double.
  615. # type: float
  616. # view_bobbing_amount = 1.0
  617. # Multiplier for fall bobbing.
  618. # For example: 0 for no view bobbing; 1.0 for normal; 2.0 for double.
  619. # type: float
  620. # fall_bobbing_amount = 0.03
  621. # 3D support.
  622. # Currently supported:
  623. # - none: no 3d output.
  624. # - anaglyph: cyan/magenta color 3d.
  625. # - interlaced: odd/even line based polarisation screen support.
  626. # - topbottom: split screen top/bottom.
  627. # - sidebyside: split screen side by side.
  628. # - crossview: Cross-eyed 3d
  629. # - pageflip: quadbuffer based 3d.
  630. # Note that the interlaced mode requires shaders to be enabled.
  631. # type: enum values: none, anaglyph, interlaced, topbottom, sidebyside, crossview, pageflip
  632. # 3d_mode = none
  633. # Strength of 3D mode parallax.
  634. # type: float
  635. # 3d_paralax_strength = 0.025
  636. # In-game chat console height, between 0.1 (10%) and 1.0 (100%).
  637. # type: float min: 0.1 max: 1
  638. # console_height = 0.6
  639. # In-game chat console background color (R,G,B).
  640. # type: string
  641. # console_color = (0,0,0)
  642. # In-game chat console background alpha (opaqueness, between 0 and 255).
  643. # type: int min: 0 max: 255
  644. # console_alpha = 200
  645. # Formspec full-screen background opacity (between 0 and 255).
  646. # type: int min: 0 max: 255
  647. # formspec_fullscreen_bg_opacity = 140
  648. # Formspec full-screen background color (R,G,B).
  649. # type: string
  650. # formspec_fullscreen_bg_color = (0,0,0)
  651. # Formspec default background opacity (between 0 and 255).
  652. # type: int min: 0 max: 255
  653. # formspec_default_bg_opacity = 140
  654. # Formspec default background color (R,G,B).
  655. # type: string
  656. # formspec_default_bg_color = (0,0,0)
  657. # Selection box border color (R,G,B).
  658. # type: string
  659. # selectionbox_color = (0,0,0)
  660. # Width of the selection box lines around nodes.
  661. # type: int min: 1 max: 5
  662. # selectionbox_width = 2
  663. # Crosshair color (R,G,B).
  664. # Also controls the object crosshair color
  665. # type: string
  666. # crosshair_color = (255,255,255)
  667. # Crosshair alpha (opaqueness, between 0 and 255).
  668. # Also controls the object crosshair color
  669. # type: int min: 0 max: 255
  670. # crosshair_alpha = 255
  671. # Maximum number of recent chat messages to show
  672. # type: int min: 2 max: 20
  673. # recent_chat_messages = 6
  674. # Whether node texture animations should be desynchronized per mapblock.
  675. # type: bool
  676. # desynchronize_mapblock_texture_animation = true
  677. # Maximum proportion of current window to be used for hotbar.
  678. # Useful if there's something to be displayed right or left of hotbar.
  679. # type: float
  680. # hud_hotbar_max_width = 1.0
  681. # Modifies the size of the hudbar elements.
  682. # type: float
  683. # hud_scaling = 1.0
  684. # Enables caching of facedir rotated meshes.
  685. # type: bool
  686. # enable_mesh_cache = false
  687. # Delay between mesh updates on the client in ms. Increasing this will slow
  688. # down the rate of mesh updates, thus reducing jitter on slower clients.
  689. # type: int min: 0 max: 50
  690. # mesh_generation_interval = 0
  691. # Size of the MapBlock cache of the mesh generator. Increasing this will
  692. # increase the cache hit %, reducing the data being copied from the main
  693. # thread, thus reducing jitter.
  694. # type: int min: 0 max: 1000
  695. # meshgen_block_cache_size = 20
  696. # Enables minimap.
  697. # type: bool
  698. # enable_minimap = true
  699. # Shape of the minimap. Enabled = round, disabled = square.
  700. # type: bool
  701. # minimap_shape_round = true
  702. # True = 256
  703. # False = 128
  704. # Usable to make minimap smoother on slower machines.
  705. # type: bool
  706. # minimap_double_scan_height = true
  707. # Make fog and sky colors depend on daytime (dawn/sunset) and view direction.
  708. # type: bool
  709. # directional_colored_fog = true
  710. # The strength (darkness) of node ambient-occlusion shading.
  711. # Lower is darker, Higher is lighter. The valid range of values for this
  712. # setting is 0.25 to 4.0 inclusive. If the value is out of range it will be
  713. # set to the nearest valid value.
  714. # type: float min: 0.25 max: 4
  715. # ambient_occlusion_gamma = 2.2
  716. # Enables animation of inventory items.
  717. # type: bool
  718. # inventory_items_animations = false
  719. # Fraction of the visible distance at which fog starts to be rendered
  720. # type: float min: 0 max: 0.99
  721. # fog_start = 0.4
  722. # Makes all liquids opaque
  723. # type: bool
  724. # opaque_water = false
  725. # Textures on a node may be aligned either to the node or to the world.
  726. # The former mode suits better things like machines, furniture, etc., while
  727. # the latter makes stairs and microblocks fit surroundings better.
  728. # However, as this possibility is new, thus may not be used by older servers,
  729. # this option allows enforcing it for certain node types. Note though that
  730. # that is considered EXPERIMENTAL and may not work properly.
  731. # type: enum values: disable, enable, force_solid, force_nodebox
  732. # world_aligned_mode = enable
  733. # World-aligned textures may be scaled to span several nodes. However,
  734. # the server may not send the scale you want, especially if you use
  735. # a specially-designed texture pack; with this option, the client tries
  736. # to determine the scale automatically basing on the texture size.
  737. # See also texture_min_size.
  738. # Warning: This option is EXPERIMENTAL!
  739. # type: enum values: disable, enable, force
  740. # autoscale_mode = disable
  741. # Show entity selection boxes
  742. # A restart is required after changing this.
  743. # type: bool
  744. # show_entity_selectionbox = false
  745. ## Menus
  746. # Use a cloud animation for the main menu background.
  747. # type: bool
  748. # menu_clouds = true
  749. # Scale GUI by a user specified value.
  750. # Use a nearest-neighbor-anti-alias filter to scale the GUI.
  751. # This will smooth over some of the rough edges, and blend
  752. # pixels when scaling down, at the cost of blurring some
  753. # edge pixels when images are scaled by non-integer sizes.
  754. # type: float min: 0.001
  755. # gui_scaling = 1.0
  756. # When gui_scaling_filter is true, all GUI images need to be
  757. # filtered in software, but some images are generated directly
  758. # to hardware (e.g. render-to-texture for nodes in inventory).
  759. # type: bool
  760. # gui_scaling_filter = false
  761. # When gui_scaling_filter_txr2img is true, copy those images
  762. # from hardware to software for scaling. When false, fall back
  763. # to the old scaling method, for video drivers that don't
  764. # properly support downloading textures back from hardware.
  765. # type: bool
  766. # gui_scaling_filter_txr2img = true
  767. # Delay showing tooltips, stated in milliseconds.
  768. # type: int
  769. # tooltip_show_delay = 400
  770. # Append item name to tooltip.
  771. # type: bool
  772. # tooltip_append_itemname = false
  773. # Whether FreeType fonts are used, requires FreeType support to be compiled in.
  774. # If disabled, bitmap and XML vectors fonts are used instead.
  775. # type: bool
  776. # freetype = true
  777. # type: bool
  778. # font_bold = false
  779. # type: bool
  780. # font_italic = false
  781. # Shadow offset (in pixels) of the default font. If 0, then shadow will not be drawn.
  782. # type: int
  783. # font_shadow = 1
  784. # Opaqueness (alpha) of the shadow behind the default font, between 0 and 255.
  785. # type: int min: 0 max: 255
  786. # font_shadow_alpha = 127
  787. # Font size of the default font in point (pt).
  788. # type: int min: 1
  789. # font_size = 16
  790. # Path to the default font.
  791. # If “freetype” setting is enabled: Must be a TrueType font.
  792. # If “freetype” setting is disabled: Must be a bitmap or XML vectors font.
  793. # The fallback font will be used if the font cannot be loaded.
  794. # type: filepath
  795. # font_path = fonts/Arimo-Regular.ttf
  796. # type: filepath
  797. # font_path_bold = fonts/Arimo-Bold.ttf
  798. # type: filepath
  799. # font_path_italic = fonts/Arimo-Italic.ttf
  800. # type: filepath
  801. # font_path_bolditalic = fonts/Arimo-BoldItalic.ttf
  802. # Font size of the monospace font in point (pt).
  803. # type: int min: 1
  804. # mono_font_size = 15
  805. # Path to the monospace font.
  806. # If “freetype” setting is enabled: Must be a TrueType font.
  807. # If “freetype” setting is disabled: Must be a bitmap or XML vectors font.
  808. # This font is used for e.g. the console and profiler screen.
  809. # type: filepath
  810. # mono_font_path = fonts/Cousine-Regular.ttf
  811. # type: filepath
  812. # mono_font_path_bold = fonts/Cousine-Bold.ttf
  813. # type: filepath
  814. # mono_font_path_italic = fonts/Cousine-Italic.ttf
  815. # type: filepath
  816. # mono_font_path_bolditalic = fonts/Cousine-BoldItalic.ttf
  817. # Font size of the fallback font in point (pt).
  818. # type: int min: 1
  819. # fallback_font_size = 15
  820. # Shadow offset (in pixels) of the fallback font. If 0, then shadow will not be drawn.
  821. # type: int
  822. # fallback_font_shadow = 1
  823. # Opaqueness (alpha) of the shadow behind the fallback font, between 0 and 255.
  824. # type: int min: 0 max: 255
  825. # fallback_font_shadow_alpha = 128
  826. # Path of the fallback font.
  827. # If “freetype” setting is enabled: Must be a TrueType font.
  828. # If “freetype” setting is disabled: Must be a bitmap or XML vectors font.
  829. # This font will be used for certain languages or if the default font is unavailable.
  830. # type: filepath
  831. # fallback_font_path = fonts/DroidSansFallbackFull.ttf
  832. # Font size of the recent chat text and chat prompt in point (pt).
  833. # Value 0 will use the default font size.
  834. # type: int
  835. # chat_font_size = 0
  836. # Path to save screenshots at. Can be an absolute or relative path.
  837. # The folder will be created if it doesn't already exist.
  838. # type: path
  839. # screenshot_path = screenshots
  840. # Format of screenshots.
  841. # type: enum values: png, jpg, bmp, pcx, ppm, tga
  842. # screenshot_format = png
  843. # Screenshot quality. Only used for JPEG format.
  844. # 1 means worst quality; 100 means best quality.
  845. # Use 0 for default quality.
  846. # type: int min: 0 max: 100
  847. # screenshot_quality = 0
  848. ## Advanced
  849. # Adjust dpi configuration to your screen (non X11/Android only) e.g. for 4k screens.
  850. # type: int min: 1
  851. # screen_dpi = 72
  852. # Windows systems only: Start Minetest with the command line window in the background.
  853. # Contains the same information as the file debug.txt (default name).
  854. # type: bool
  855. # enable_console = false
  856. #
  857. # Sound
  858. #
  859. # Enables the sound system.
  860. # If disabled, this completely disables all sounds everywhere and the in-game
  861. # sound controls will be non-functional.
  862. # Changing this setting requires a restart.
  863. # type: bool
  864. # enable_sound = true
  865. # Volume of all sounds.
  866. # Requires the sound system to be enabled.
  867. # type: float min: 0 max: 1
  868. # sound_volume = 0.7
  869. # Whether to mute sounds. You can unmute sounds at any time, unless the
  870. # sound system is disabled (enable_sound=false).
  871. # In-game, you can toggle the mute state with the mute key or by using the
  872. # pause menu.
  873. # type: bool
  874. # mute_sound = false
  875. #
  876. # Client
  877. #
  878. ## Network
  879. # Address to connect to.
  880. # Leave this blank to start a local server.
  881. # Note that the address field in the main menu overrides this setting.
  882. # type: string
  883. # address =
  884. # Port to connect to (UDP).
  885. # Note that the port field in the main menu overrides this setting.
  886. # type: int min: 1 max: 65535
  887. # remote_port = 30000
  888. # Prometheus listener address.
  889. # If minetest is compiled with ENABLE_PROMETHEUS option enabled,
  890. # enable metrics listener for Prometheus on that address.
  891. # Metrics can be fetch on http://127.0.0.1:30000/metrics
  892. # type: string
  893. # prometheus_listener_address = 127.0.0.1:30000
  894. # Save the map received by the client on disk.
  895. # type: bool
  896. # enable_local_map_saving = false
  897. # Enable usage of remote media server (if provided by server).
  898. # Remote servers offer a significantly faster way to download media (e.g. textures)
  899. # when connecting to the server.
  900. # type: bool
  901. # enable_remote_media_server = true
  902. # Enable Lua modding support on client.
  903. # This support is experimental and API can change.
  904. # type: bool
  905. # enable_client_modding = false
  906. # URL to the server list displayed in the Multiplayer Tab.
  907. # type: string
  908. # serverlist_url = servers.minetest.net
  909. # File in client/serverlist/ that contains your favorite servers displayed in the
  910. # Multiplayer Tab.
  911. # type: string
  912. # serverlist_file = favoriteservers.json
  913. # Maximum size of the out chat queue.
  914. # 0 to disable queueing and -1 to make the queue size unlimited.
  915. # type: int
  916. # max_out_chat_queue_size = 20
  917. # Enable register confirmation when connecting to server.
  918. # If disabled, new account will be registered automatically.
  919. # type: bool
  920. # enable_register_confirmation = true
  921. ## Advanced
  922. # Timeout for client to remove unused map data from memory.
  923. # type: int
  924. # client_unload_unused_data_timeout = 600
  925. # Maximum number of mapblocks for client to be kept in memory.
  926. # Set to -1 for unlimited amount.
  927. # type: int
  928. # client_mapblock_limit = 7500
  929. # Whether to show the client debug info (has the same effect as hitting F5).
  930. # type: bool
  931. # show_debug = false
  932. #
  933. # Server / Singleplayer
  934. #
  935. # Name of the server, to be displayed when players join and in the serverlist.
  936. # type: string
  937. # server_name = Minetest server
  938. # Description of server, to be displayed when players join and in the serverlist.
  939. # type: string
  940. # server_description = mine here
  941. # Domain name of server, to be displayed in the serverlist.
  942. # type: string
  943. # server_address = game.minetest.net
  944. # Homepage of server, to be displayed in the serverlist.
  945. # type: string
  946. # server_url = https://minetest.net
  947. # Automatically report to the serverlist.
  948. # type: bool
  949. # server_announce = false
  950. # Announce to this serverlist.
  951. # type: string
  952. # serverlist_url = servers.minetest.net
  953. # Remove color codes from incoming chat messages
  954. # Use this to stop players from being able to use color in their messages
  955. # type: bool
  956. # strip_color_codes = false
  957. ## Network
  958. # Network port to listen (UDP).
  959. # This value will be overridden when starting from the main menu.
  960. # type: int
  961. # port = 30000
  962. # The network interface that the server listens on.
  963. # type: string
  964. # bind_address =
  965. # Enable to disallow old clients from connecting.
  966. # Older clients are compatible in the sense that they will not crash when connecting
  967. # to new servers, but they may not support all new features that you are expecting.
  968. # type: bool
  969. # strict_protocol_version_checking = false
  970. # Specifies URL from which client fetches media instead of using UDP.
  971. # $filename should be accessible from $remote_media$filename via cURL
  972. # (obviously, remote_media should end with a slash).
  973. # Files that are not present will be fetched the usual way.
  974. # type: string
  975. # remote_media =
  976. # Enable/disable running an IPv6 server.
  977. # Ignored if bind_address is set.
  978. # Needs enable_ipv6 to be enabled.
  979. # type: bool
  980. # ipv6_server = false
  981. ### Advanced
  982. # Maximum number of blocks that are simultaneously sent per client.
  983. # The maximum total count is calculated dynamically:
  984. # max_total = ceil((#clients + max_users) * per_client / 4)
  985. # type: int
  986. # max_simultaneous_block_sends_per_client = 40
  987. # To reduce lag, block transfers are slowed down when a player is building something.
  988. # This determines how long they are slowed down after placing or removing a node.
  989. # type: float
  990. # full_block_send_enable_min_time_from_building = 2.0
  991. # Maximum number of packets sent per send step, if you have a slow connection
  992. # try reducing it, but don't reduce it to a number below double of targeted
  993. # client number.
  994. # type: int
  995. # max_packets_per_iteration = 1024
  996. # ZLib compression level to use when sending mapblocks to the client.
  997. # -1 - Zlib's default compression level
  998. # 0 - no compresson, fastest
  999. # 9 - best compression, slowest
  1000. # (levels 1-3 use Zlib's "fast" method, 4-9 use the normal method)
  1001. # type: int min: -1 max: 9
  1002. # map_compression_level_net = -1
  1003. ## Game
  1004. # Default game when creating a new world.
  1005. # This will be overridden when creating a world from the main menu.
  1006. # type: string
  1007. # default_game = minetest
  1008. # Message of the day displayed to players connecting.
  1009. # type: string
  1010. # motd =
  1011. # Maximum number of players that can be connected simultaneously.
  1012. # type: int
  1013. # max_users = 15
  1014. # World directory (everything in the world is stored here).
  1015. # Not needed if starting from the main menu.
  1016. # type: path
  1017. # map-dir =
  1018. # Time in seconds for item entity (dropped items) to live.
  1019. # Setting it to -1 disables the feature.
  1020. # type: int
  1021. # item_entity_ttl = 900
  1022. # Specifies the default stack size of nodes, items and tools.
  1023. # Note that mods or games may explicitly set a stack for certain (or all) items.
  1024. # type: int
  1025. # default_stack_max = 99
  1026. # Enable players getting damage and dying.
  1027. # type: bool
  1028. # enable_damage = false
  1029. # Enable creative mode for new created maps.
  1030. # type: bool
  1031. # creative_mode = false
  1032. # A chosen map seed for a new map, leave empty for random.
  1033. # Will be overridden when creating a new world in the main menu.
  1034. # type: string
  1035. # fixed_map_seed =
  1036. # New users need to input this password.
  1037. # type: string
  1038. # default_password =
  1039. # The privileges that new users automatically get.
  1040. # See /privs in game for a full list on your server and mod configuration.
  1041. # type: string
  1042. # default_privs = interact, shout
  1043. # Privileges that players with basic_privs can grant
  1044. # type: string
  1045. # basic_privs = interact, shout
  1046. # Whether players are shown to clients without any range limit.
  1047. # Deprecated, use the setting player_transfer_distance instead.
  1048. # type: bool
  1049. # unlimited_player_transfer_distance = true
  1050. # Defines the maximal player transfer distance in blocks (0 = unlimited).
  1051. # type: int
  1052. # player_transfer_distance = 0
  1053. # Whether to allow players to damage and kill each other.
  1054. # type: bool
  1055. # enable_pvp = true
  1056. # Enable mod channels support.
  1057. # type: bool
  1058. # enable_mod_channels = false
  1059. # If this is set, players will always (re)spawn at the given position.
  1060. # type: string
  1061. # static_spawnpoint =
  1062. # If enabled, new players cannot join with an empty password.
  1063. # type: bool
  1064. # disallow_empty_password = false
  1065. # If enabled, disable cheat prevention in multiplayer.
  1066. # type: bool
  1067. # disable_anticheat = false
  1068. # If enabled, actions are recorded for rollback.
  1069. # This option is only read when server starts.
  1070. # type: bool
  1071. # enable_rollback_recording = false
  1072. # Format of player chat messages. The following strings are valid placeholders:
  1073. # @name, @message, @timestamp (optional)
  1074. # type: string
  1075. # chat_message_format = <@name> @message
  1076. # A message to be displayed to all clients when the server shuts down.
  1077. # type: string
  1078. # kick_msg_shutdown = Server shutting down.
  1079. # A message to be displayed to all clients when the server crashes.
  1080. # type: string
  1081. # kick_msg_crash = This server has experienced an internal error. You will now be disconnected.
  1082. # Whether to ask clients to reconnect after a (Lua) crash.
  1083. # Set this to true if your server is set up to restart automatically.
  1084. # type: bool
  1085. # ask_reconnect_on_crash = false
  1086. # From how far clients know about objects, stated in mapblocks (16 nodes).
  1087. #
  1088. # Setting this larger than active_block_range will also cause the server
  1089. # to maintain active objects up to this distance in the direction the
  1090. # player is looking. (This can avoid mobs suddenly disappearing from view)
  1091. # type: int
  1092. # active_object_send_range_blocks = 8
  1093. # The radius of the volume of blocks around every player that is subject to the
  1094. # active block stuff, stated in mapblocks (16 nodes).
  1095. # In active blocks objects are loaded and ABMs run.
  1096. # This is also the minimum range in which active objects (mobs) are maintained.
  1097. # This should be configured together with active_object_send_range_blocks.
  1098. # type: int
  1099. # active_block_range = 4
  1100. # From how far blocks are sent to clients, stated in mapblocks (16 nodes).
  1101. # type: int
  1102. # max_block_send_distance = 12
  1103. # Maximum number of forceloaded mapblocks.
  1104. # type: int
  1105. # max_forceloaded_blocks = 16
  1106. # Interval of sending time of day to clients.
  1107. # type: int
  1108. # time_send_interval = 5
  1109. # Controls length of day/night cycle.
  1110. # Examples:
  1111. # 72 = 20min, 360 = 4min, 1 = 24hour, 0 = day/night/whatever stays unchanged.
  1112. # type: int
  1113. # time_speed = 72
  1114. # Time of day when a new world is started, in millihours (0-23999).
  1115. # type: int min: 0 max: 23999
  1116. # world_start_time = 6125
  1117. # Interval of saving important changes in the world, stated in seconds.
  1118. # type: float
  1119. # server_map_save_interval = 5.3
  1120. # Set the maximum character length of a chat message sent by clients.
  1121. # type: int
  1122. # chat_message_max_size = 500
  1123. # Amount of messages a player may send per 10 seconds.
  1124. # type: float
  1125. # chat_message_limit_per_10sec = 10.0
  1126. # Kick players who sent more than X messages per 10 seconds.
  1127. # type: int
  1128. # chat_message_limit_trigger_kick = 50
  1129. ### Physics
  1130. # Horizontal and vertical acceleration on ground or when climbing,
  1131. # in nodes per second per second.
  1132. # type: float
  1133. # movement_acceleration_default = 3
  1134. # Horizontal acceleration in air when jumping or falling,
  1135. # in nodes per second per second.
  1136. # type: float
  1137. # movement_acceleration_air = 2
  1138. # Horizontal and vertical acceleration in fast mode,
  1139. # in nodes per second per second.
  1140. # type: float
  1141. # movement_acceleration_fast = 10
  1142. # Walking and flying speed, in nodes per second.
  1143. # type: float
  1144. # movement_speed_walk = 4
  1145. # Sneaking speed, in nodes per second.
  1146. # type: float
  1147. # movement_speed_crouch = 1.35
  1148. # Walking, flying and climbing speed in fast mode, in nodes per second.
  1149. # type: float
  1150. # movement_speed_fast = 20
  1151. # Vertical climbing speed, in nodes per second.
  1152. # type: float
  1153. # movement_speed_climb = 3
  1154. # Initial vertical speed when jumping, in nodes per second.
  1155. # type: float
  1156. # movement_speed_jump = 6.5
  1157. # Decrease this to increase liquid resistance to movement.
  1158. # type: float
  1159. # movement_liquid_fluidity = 1
  1160. # Maximum liquid resistance. Controls deceleration when entering liquid at
  1161. # high speed.
  1162. # type: float
  1163. # movement_liquid_fluidity_smooth = 0.5
  1164. # Controls sinking speed in liquid.
  1165. # type: float
  1166. # movement_liquid_sink = 10
  1167. # Acceleration of gravity, in nodes per second per second.
  1168. # type: float
  1169. # movement_gravity = 9.81
  1170. ### Advanced
  1171. # Handling for deprecated Lua API calls:
  1172. # - none: Do not log deprecated calls
  1173. # - log: mimic and log backtrace of deprecated call (default).
  1174. # - error: abort on usage of deprecated call (suggested for mod developers).
  1175. # type: enum values: none, log, error
  1176. # deprecated_lua_api_handling = log
  1177. # Number of extra blocks that can be loaded by /clearobjects at once.
  1178. # This is a trade-off between sqlite transaction overhead and
  1179. # memory consumption (4096=100MB, as a rule of thumb).
  1180. # type: int
  1181. # max_clearobjects_extra_loaded_blocks = 4096
  1182. # How much the server will wait before unloading unused mapblocks.
  1183. # Higher value is smoother, but will use more RAM.
  1184. # type: int
  1185. # server_unload_unused_data_timeout = 29
  1186. # Maximum number of statically stored objects in a block.
  1187. # type: int
  1188. # max_objects_per_block = 64
  1189. # See https://www.sqlite.org/pragma.html#pragma_synchronous
  1190. # type: enum values: 0, 1, 2
  1191. # sqlite_synchronous = 2
  1192. # ZLib compression level to use when saving mapblocks to disk.
  1193. # -1 - Zlib's default compression level
  1194. # 0 - no compresson, fastest
  1195. # 9 - best compression, slowest
  1196. # (levels 1-3 use Zlib's "fast" method, 4-9 use the normal method)
  1197. # type: int min: -1 max: 9
  1198. # map_compression_level_disk = 3
  1199. # Length of a server tick and the interval at which objects are generally updated over
  1200. # network.
  1201. # type: float
  1202. # dedicated_server_step = 0.09
  1203. # Length of time between active block management cycles
  1204. # type: float
  1205. # active_block_mgmt_interval = 2.0
  1206. # Length of time between Active Block Modifier (ABM) execution cycles
  1207. # type: float
  1208. # abm_interval = 1.0
  1209. # The time budget allowed for ABMs to execute on each step
  1210. # (as a fraction of the ABM Interval)
  1211. # type: float min: 0.1 max: 0.9
  1212. # abm_time_budget = 0.2
  1213. # Length of time between NodeTimer execution cycles
  1214. # type: float
  1215. # nodetimer_interval = 0.2
  1216. # If enabled, invalid world data won't cause the server to shut down.
  1217. # Only enable this if you know what you are doing.
  1218. # type: bool
  1219. # ignore_world_load_errors = false
  1220. # Max liquids processed per step.
  1221. # type: int
  1222. # liquid_loop_max = 100000
  1223. # The time (in seconds) that the liquids queue may grow beyond processing
  1224. # capacity until an attempt is made to decrease its size by dumping old queue
  1225. # items. A value of 0 disables the functionality.
  1226. # type: int
  1227. # liquid_queue_purge_time = 0
  1228. # Liquid update interval in seconds.
  1229. # type: float
  1230. # liquid_update = 1.0
  1231. # At this distance the server will aggressively optimize which blocks are sent to
  1232. # clients.
  1233. # Small values potentially improve performance a lot, at the expense of visible
  1234. # rendering glitches (some blocks will not be rendered under water and in caves,
  1235. # as well as sometimes on land).
  1236. # Setting this to a value greater than max_block_send_distance disables this
  1237. # optimization.
  1238. # Stated in mapblocks (16 nodes).
  1239. # type: int min: 2
  1240. # block_send_optimize_distance = 4
  1241. # If enabled the server will perform map block occlusion culling based on
  1242. # on the eye position of the player. This can reduce the number of blocks
  1243. # sent to the client 50-80%. The client will not longer receive most invisible
  1244. # so that the utility of noclip mode is reduced.
  1245. # type: bool
  1246. # server_side_occlusion_culling = true
  1247. # Restricts the access of certain client-side functions on servers.
  1248. # Combine the byteflags below to restrict client-side features, or set to 0
  1249. # for no restrictions:
  1250. # LOAD_CLIENT_MODS: 1 (disable loading client-provided mods)
  1251. # CHAT_MESSAGES: 2 (disable send_chat_message call client-side)
  1252. # READ_ITEMDEFS: 4 (disable get_item_def call client-side)
  1253. # READ_NODEDEFS: 8 (disable get_node_def call client-side)
  1254. # LOOKUP_NODES_LIMIT: 16 (limits get_node call client-side to
  1255. # csm_restriction_noderange)
  1256. # READ_PLAYERINFO: 32 (disable get_player_names call client-side)
  1257. # type: int
  1258. # csm_restriction_flags = 62
  1259. # If the CSM restriction for node range is enabled, get_node calls are limited
  1260. # to this distance from the player to the node.
  1261. # type: int
  1262. # csm_restriction_noderange = 0
  1263. ## Security
  1264. # Prevent mods from doing insecure things like running shell commands.
  1265. # type: bool
  1266. # secure.enable_security = true
  1267. # Comma-separated list of trusted mods that are allowed to access insecure
  1268. # functions even when mod security is on (via request_insecure_environment()).
  1269. # type: string
  1270. # secure.trusted_mods =
  1271. # Comma-separated list of mods that are allowed to access HTTP APIs, which
  1272. # allow them to upload and download data to/from the internet.
  1273. # type: string
  1274. # secure.http_mods =
  1275. ## Advanced
  1276. ### Profiling
  1277. # Load the game profiler to collect game profiling data.
  1278. # Provides a /profiler command to access the compiled profile.
  1279. # Useful for mod developers and server operators.
  1280. # type: bool
  1281. # profiler.load = false
  1282. # The default format in which profiles are being saved,
  1283. # when calling `/profiler save [format]` without format.
  1284. # type: enum values: txt, csv, lua, json, json_pretty
  1285. # profiler.default_report_format = txt
  1286. # The file path relative to your worldpath in which profiles will be saved to.
  1287. # type: string
  1288. # profiler.report_path = ""
  1289. #### Instrumentation
  1290. # Instrument the methods of entities on registration.
  1291. # type: bool
  1292. # instrument.entity = true
  1293. # Instrument the action function of Active Block Modifiers on registration.
  1294. # type: bool
  1295. # instrument.abm = true
  1296. # Instrument the action function of Loading Block Modifiers on registration.
  1297. # type: bool
  1298. # instrument.lbm = true
  1299. # Instrument chatcommands on registration.
  1300. # type: bool
  1301. # instrument.chatcommand = true
  1302. # Instrument global callback functions on registration.
  1303. # (anything you pass to a minetest.register_*() function)
  1304. # type: bool
  1305. # instrument.global_callback = true
  1306. ##### Advanced
  1307. # Instrument builtin.
  1308. # This is usually only needed by core/builtin contributors
  1309. # type: bool
  1310. # instrument.builtin = false
  1311. # Have the profiler instrument itself:
  1312. # * Instrument an empty function.
  1313. # This estimates the overhead, that instrumentation is adding (+1 function call).
  1314. # * Instrument the sampler being used to update the statistics.
  1315. # type: bool
  1316. # instrument.profiler = false
  1317. #
  1318. # Client and Server
  1319. #
  1320. # Name of the player.
  1321. # When running a server, clients connecting with this name are admins.
  1322. # When starting from the main menu, this is overridden.
  1323. # type: string
  1324. # name =
  1325. # Set the language. Leave empty to use the system language.
  1326. # A restart is required after changing this.
  1327. # type: enum values: , ar, ca, cs, da, de, dv, el, en, eo, es, et, eu, fil, fr, hu, id, it, ja, ja_KS, jbo, kk, kn, lo, lt, ms, my, nb, nl, nn, pl, pt, pt_BR, ro, ru, sl, sr_Cyrl, sv, sw, th, tr, uk, vi
  1328. # language =
  1329. # Level of logging to be written to debug.txt:
  1330. # - <nothing> (no logging)
  1331. # - none (messages with no level)
  1332. # - error
  1333. # - warning
  1334. # - action
  1335. # - info
  1336. # - verbose
  1337. # type: enum values: , none, error, warning, action, info, verbose
  1338. # debug_log_level = action
  1339. # If the file size of debug.txt exceeds the number of megabytes specified in
  1340. # this setting when it is opened, the file is moved to debug.txt.1,
  1341. # deleting an older debug.txt.1 if it exists.
  1342. # debug.txt is only moved if this setting is positive.
  1343. # type: int
  1344. # debug_log_size_max = 50
  1345. # Minimal level of logging to be written to chat.
  1346. # type: enum values: , none, error, warning, action, info, verbose
  1347. # chat_log_level = error
  1348. # Enable IPv6 support (for both client and server).
  1349. # Required for IPv6 connections to work at all.
  1350. # type: bool
  1351. # enable_ipv6 = true
  1352. ## Advanced
  1353. # Default timeout for cURL, stated in milliseconds.
  1354. # Only has an effect if compiled with cURL.
  1355. # type: int
  1356. # curl_timeout = 5000
  1357. # Limits number of parallel HTTP requests. Affects:
  1358. # - Media fetch if server uses remote_media setting.
  1359. # - Serverlist download and server announcement.
  1360. # - Downloads performed by main menu (e.g. mod manager).
  1361. # Only has an effect if compiled with cURL.
  1362. # type: int
  1363. # curl_parallel_limit = 8
  1364. # Maximum time in ms a file download (e.g. a mod download) may take.
  1365. # type: int
  1366. # curl_file_download_timeout = 300000
  1367. # Makes DirectX work with LuaJIT. Disable if it causes troubles.
  1368. # type: bool
  1369. # high_precision_fpu = true
  1370. # Replaces the default main menu with a custom one.
  1371. # type: string
  1372. # main_menu_script =
  1373. # Print the engine's profiling data in regular intervals (in seconds).
  1374. # 0 = disable. Useful for developers.
  1375. # type: int
  1376. # profiler_print_interval = 0
  1377. #
  1378. # Mapgen
  1379. #
  1380. # Name of map generator to be used when creating a new world.
  1381. # Creating a world in the main menu will override this.
  1382. # Current mapgens in a highly unstable state:
  1383. # - The optional floatlands of v7 (disabled by default).
  1384. # type: enum values: v7, valleys, carpathian, v5, flat, fractal, singlenode, v6
  1385. # mg_name = v7
  1386. # Water surface level of the world.
  1387. # type: int
  1388. # water_level = 1
  1389. # From how far blocks are generated for clients, stated in mapblocks (16 nodes).
  1390. # type: int
  1391. # max_block_generate_distance = 10
  1392. # Limit of map generation, in nodes, in all 6 directions from (0, 0, 0).
  1393. # Only mapchunks completely within the mapgen limit are generated.
  1394. # Value is stored per-world.
  1395. # type: int min: 0 max: 31000
  1396. # mapgen_limit = 31000
  1397. # Global map generation attributes.
  1398. # In Mapgen v6 the 'decorations' flag controls all decorations except trees
  1399. # and junglegrass, in all other mapgens this flag controls all decorations.
  1400. # type: flags possible values: caves, dungeons, light, decorations, biomes, ores, nocaves, nodungeons, nolight, nodecorations, nobiomes, noores
  1401. # mg_flags = caves,dungeons,light,decorations,biomes,ores
  1402. ## Biome API temperature and humidity noise parameters
  1403. # Temperature variation for biomes.
  1404. # type: noise_params_2d
  1405. # mg_biome_np_heat = {
  1406. # offset = 50,
  1407. # scale = 50,
  1408. # spread = (1000, 1000, 1000),
  1409. # seed = 5349,
  1410. # octaves = 3,
  1411. # persistence = 0.5,
  1412. # lacunarity = 2.0,
  1413. # flags = eased
  1414. # }
  1415. # Small-scale temperature variation for blending biomes on borders.
  1416. # type: noise_params_2d
  1417. # mg_biome_np_heat_blend = {
  1418. # offset = 0,
  1419. # scale = 1.5,
  1420. # spread = (8, 8, 8),
  1421. # seed = 13,
  1422. # octaves = 2,
  1423. # persistence = 1.0,
  1424. # lacunarity = 2.0,
  1425. # flags = eased
  1426. # }
  1427. # Humidity variation for biomes.
  1428. # type: noise_params_2d
  1429. # mg_biome_np_humidity = {
  1430. # offset = 50,
  1431. # scale = 50,
  1432. # spread = (1000, 1000, 1000),
  1433. # seed = 842,
  1434. # octaves = 3,
  1435. # persistence = 0.5,
  1436. # lacunarity = 2.0,
  1437. # flags = eased
  1438. # }
  1439. # Small-scale humidity variation for blending biomes on borders.
  1440. # type: noise_params_2d
  1441. # mg_biome_np_humidity_blend = {
  1442. # offset = 0,
  1443. # scale = 1.5,
  1444. # spread = (8, 8, 8),
  1445. # seed = 90003,
  1446. # octaves = 2,
  1447. # persistence = 1.0,
  1448. # lacunarity = 2.0,
  1449. # flags = eased
  1450. # }
  1451. ## Mapgen V5
  1452. # Map generation attributes specific to Mapgen v5.
  1453. # type: flags possible values: caverns, nocaverns
  1454. # mgv5_spflags = caverns
  1455. # Controls width of tunnels, a smaller value creates wider tunnels.
  1456. # Value >= 10.0 completely disables generation of tunnels and avoids the
  1457. # intensive noise calculations.
  1458. # type: float
  1459. # mgv5_cave_width = 0.09
  1460. # Y of upper limit of large caves.
  1461. # type: int
  1462. # mgv5_large_cave_depth = -256
  1463. # Minimum limit of random number of small caves per mapchunk.
  1464. # type: int min: 0 max: 256
  1465. # mgv5_small_cave_num_min = 0
  1466. # Maximum limit of random number of small caves per mapchunk.
  1467. # type: int min: 0 max: 256
  1468. # mgv5_small_cave_num_max = 0
  1469. # Minimum limit of random number of large caves per mapchunk.
  1470. # type: int min: 0 max: 64
  1471. # mgv5_large_cave_num_min = 0
  1472. # Maximum limit of random number of large caves per mapchunk.
  1473. # type: int min: 0 max: 64
  1474. # mgv5_large_cave_num_max = 2
  1475. # Proportion of large caves that contain liquid.
  1476. # type: float min: 0 max: 1
  1477. # mgv5_large_cave_flooded = 0.5
  1478. # Y-level of cavern upper limit.
  1479. # type: int
  1480. # mgv5_cavern_limit = -256
  1481. # Y-distance over which caverns expand to full size.
  1482. # type: int
  1483. # mgv5_cavern_taper = 256
  1484. # Defines full size of caverns, smaller values create larger caverns.
  1485. # type: float
  1486. # mgv5_cavern_threshold = 0.7
  1487. # Lower Y limit of dungeons.
  1488. # type: int
  1489. # mgv5_dungeon_ymin = -31000
  1490. # Upper Y limit of dungeons.
  1491. # type: int
  1492. # mgv5_dungeon_ymax = 31000
  1493. ### Noises
  1494. # Variation of biome filler depth.
  1495. # type: noise_params_2d
  1496. # mgv5_np_filler_depth = {
  1497. # offset = 0,
  1498. # scale = 1,
  1499. # spread = (150, 150, 150),
  1500. # seed = 261,
  1501. # octaves = 4,
  1502. # persistence = 0.7,
  1503. # lacunarity = 2.0,
  1504. # flags = eased
  1505. # }
  1506. # Variation of terrain vertical scale.
  1507. # When noise is < -0.55 terrain is near-flat.
  1508. # type: noise_params_2d
  1509. # mgv5_np_factor = {
  1510. # offset = 0,
  1511. # scale = 1,
  1512. # spread = (250, 250, 250),
  1513. # seed = 920381,
  1514. # octaves = 3,
  1515. # persistence = 0.45,
  1516. # lacunarity = 2.0,
  1517. # flags = eased
  1518. # }
  1519. # Y-level of average terrain surface.
  1520. # type: noise_params_2d
  1521. # mgv5_np_height = {
  1522. # offset = 0,
  1523. # scale = 10,
  1524. # spread = (250, 250, 250),
  1525. # seed = 84174,
  1526. # octaves = 4,
  1527. # persistence = 0.5,
  1528. # lacunarity = 2.0,
  1529. # flags = eased
  1530. # }
  1531. # First of two 3D noises that together define tunnels.
  1532. # type: noise_params_3d
  1533. # mgv5_np_cave1 = {
  1534. # offset = 0,
  1535. # scale = 12,
  1536. # spread = (61, 61, 61),
  1537. # seed = 52534,
  1538. # octaves = 3,
  1539. # persistence = 0.5,
  1540. # lacunarity = 2.0,
  1541. # flags =
  1542. # }
  1543. # Second of two 3D noises that together define tunnels.
  1544. # type: noise_params_3d
  1545. # mgv5_np_cave2 = {
  1546. # offset = 0,
  1547. # scale = 12,
  1548. # spread = (67, 67, 67),
  1549. # seed = 10325,
  1550. # octaves = 3,
  1551. # persistence = 0.5,
  1552. # lacunarity = 2.0,
  1553. # flags =
  1554. # }
  1555. # 3D noise defining giant caverns.
  1556. # type: noise_params_3d
  1557. # mgv5_np_cavern = {
  1558. # offset = 0,
  1559. # scale = 1,
  1560. # spread = (384, 128, 384),
  1561. # seed = 723,
  1562. # octaves = 5,
  1563. # persistence = 0.63,
  1564. # lacunarity = 2.0,
  1565. # flags =
  1566. # }
  1567. # 3D noise defining terrain.
  1568. # type: noise_params_3d
  1569. # mgv5_np_ground = {
  1570. # offset = 0,
  1571. # scale = 40,
  1572. # spread = (80, 80, 80),
  1573. # seed = 983240,
  1574. # octaves = 4,
  1575. # persistence = 0.55,
  1576. # lacunarity = 2.0,
  1577. # flags = eased
  1578. # }
  1579. # 3D noise that determines number of dungeons per mapchunk.
  1580. # type: noise_params_3d
  1581. # mgv5_np_dungeons = {
  1582. # offset = 0.9,
  1583. # scale = 0.5,
  1584. # spread = (500, 500, 500),
  1585. # seed = 0,
  1586. # octaves = 2,
  1587. # persistence = 0.8,
  1588. # lacunarity = 2.0,
  1589. # flags =
  1590. # }
  1591. ## Mapgen V6
  1592. # Map generation attributes specific to Mapgen v6.
  1593. # The 'snowbiomes' flag enables the new 5 biome system.
  1594. # When the 'snowbiomes' flag is enabled jungles are automatically enabled and
  1595. # the 'jungles' flag is ignored.
  1596. # type: flags possible values: jungles, biomeblend, mudflow, snowbiomes, flat, trees, nojungles, nobiomeblend, nomudflow, nosnowbiomes, noflat, notrees
  1597. # mgv6_spflags = jungles,biomeblend,mudflow,snowbiomes,noflat,trees
  1598. # Deserts occur when np_biome exceeds this value.
  1599. # When the 'snowbiomes' flag is enabled, this is ignored.
  1600. # type: float
  1601. # mgv6_freq_desert = 0.45
  1602. # Sandy beaches occur when np_beach exceeds this value.
  1603. # type: float
  1604. # mgv6_freq_beach = 0.15
  1605. # Lower Y limit of dungeons.
  1606. # type: int
  1607. # mgv6_dungeon_ymin = -31000
  1608. # Upper Y limit of dungeons.
  1609. # type: int
  1610. # mgv6_dungeon_ymax = 31000
  1611. ### Noises
  1612. # Y-level of lower terrain and seabed.
  1613. # type: noise_params_2d
  1614. # mgv6_np_terrain_base = {
  1615. # offset = -4,
  1616. # scale = 20,
  1617. # spread = (250, 250, 250),
  1618. # seed = 82341,
  1619. # octaves = 5,
  1620. # persistence = 0.6,
  1621. # lacunarity = 2.0,
  1622. # flags = eased
  1623. # }
  1624. # Y-level of higher terrain that creates cliffs.
  1625. # type: noise_params_2d
  1626. # mgv6_np_terrain_higher = {
  1627. # offset = 20,
  1628. # scale = 16,
  1629. # spread = (500, 500, 500),
  1630. # seed = 85039,
  1631. # octaves = 5,
  1632. # persistence = 0.6,
  1633. # lacunarity = 2.0,
  1634. # flags = eased
  1635. # }
  1636. # Varies steepness of cliffs.
  1637. # type: noise_params_2d
  1638. # mgv6_np_steepness = {
  1639. # offset = 0.85,
  1640. # scale = 0.5,
  1641. # spread = (125, 125, 125),
  1642. # seed = -932,
  1643. # octaves = 5,
  1644. # persistence = 0.7,
  1645. # lacunarity = 2.0,
  1646. # flags = eased
  1647. # }
  1648. # Defines distribution of higher terrain.
  1649. # type: noise_params_2d
  1650. # mgv6_np_height_select = {
  1651. # offset = 0.5,
  1652. # scale = 1,
  1653. # spread = (250, 250, 250),
  1654. # seed = 4213,
  1655. # octaves = 5,
  1656. # persistence = 0.69,
  1657. # lacunarity = 2.0,
  1658. # flags = eased
  1659. # }
  1660. # Varies depth of biome surface nodes.
  1661. # type: noise_params_2d
  1662. # mgv6_np_mud = {
  1663. # offset = 4,
  1664. # scale = 2,
  1665. # spread = (200, 200, 200),
  1666. # seed = 91013,
  1667. # octaves = 3,
  1668. # persistence = 0.55,
  1669. # lacunarity = 2.0,
  1670. # flags = eased
  1671. # }
  1672. # Defines areas with sandy beaches.
  1673. # type: noise_params_2d
  1674. # mgv6_np_beach = {
  1675. # offset = 0,
  1676. # scale = 1,
  1677. # spread = (250, 250, 250),
  1678. # seed = 59420,
  1679. # octaves = 3,
  1680. # persistence = 0.50,
  1681. # lacunarity = 2.0,
  1682. # flags = eased
  1683. # }
  1684. # Temperature variation for biomes.
  1685. # type: noise_params_2d
  1686. # mgv6_np_biome = {
  1687. # offset = 0,
  1688. # scale = 1,
  1689. # spread = (500, 500, 500),
  1690. # seed = 9130,
  1691. # octaves = 3,
  1692. # persistence = 0.50,
  1693. # lacunarity = 2.0,
  1694. # flags = eased
  1695. # }
  1696. # Variation of number of caves.
  1697. # type: noise_params_2d
  1698. # mgv6_np_cave = {
  1699. # offset = 6,
  1700. # scale = 6,
  1701. # spread = (250, 250, 250),
  1702. # seed = 34329,
  1703. # octaves = 3,
  1704. # persistence = 0.50,
  1705. # lacunarity = 2.0,
  1706. # flags = eased
  1707. # }
  1708. # Humidity variation for biomes.
  1709. # type: noise_params_2d
  1710. # mgv6_np_humidity = {
  1711. # offset = 0.5,
  1712. # scale = 0.5,
  1713. # spread = (500, 500, 500),
  1714. # seed = 72384,
  1715. # octaves = 3,
  1716. # persistence = 0.50,
  1717. # lacunarity = 2.0,
  1718. # flags = eased
  1719. # }
  1720. # Defines tree areas and tree density.
  1721. # type: noise_params_2d
  1722. # mgv6_np_trees = {
  1723. # offset = 0,
  1724. # scale = 1,
  1725. # spread = (125, 125, 125),
  1726. # seed = 2,
  1727. # octaves = 4,
  1728. # persistence = 0.66,
  1729. # lacunarity = 2.0,
  1730. # flags = eased
  1731. # }
  1732. # Defines areas where trees have apples.
  1733. # type: noise_params_2d
  1734. # mgv6_np_apple_trees = {
  1735. # offset = 0,
  1736. # scale = 1,
  1737. # spread = (100, 100, 100),
  1738. # seed = 342902,
  1739. # octaves = 3,
  1740. # persistence = 0.45,
  1741. # lacunarity = 2.0,
  1742. # flags = eased
  1743. # }
  1744. ## Mapgen V7
  1745. # Map generation attributes specific to Mapgen v7.
  1746. # 'ridges': Rivers.
  1747. # 'floatlands': Floating land masses in the atmosphere.
  1748. # 'caverns': Giant caves deep underground.
  1749. # type: flags possible values: mountains, ridges, floatlands, caverns, nomountains, noridges, nofloatlands, nocaverns
  1750. # mgv7_spflags = mountains,ridges,nofloatlands,caverns
  1751. # Y of mountain density gradient zero level. Used to shift mountains vertically.
  1752. # type: int
  1753. # mgv7_mount_zero_level = 0
  1754. # Lower Y limit of floatlands.
  1755. # type: int
  1756. # mgv7_floatland_ymin = 1024
  1757. # Upper Y limit of floatlands.
  1758. # type: int
  1759. # mgv7_floatland_ymax = 4096
  1760. # Y-distance over which floatlands taper from full density to nothing.
  1761. # Tapering starts at this distance from the Y limit.
  1762. # For a solid floatland layer, this controls the height of hills/mountains.
  1763. # Must be less than or equal to half the distance between the Y limits.
  1764. # type: int
  1765. # mgv7_floatland_taper = 256
  1766. # Exponent of the floatland tapering. Alters the tapering behaviour.
  1767. # Value = 1.0 creates a uniform, linear tapering.
  1768. # Values > 1.0 create a smooth tapering suitable for the default separated
  1769. # floatlands.
  1770. # Values < 1.0 (for example 0.25) create a more defined surface level with
  1771. # flatter lowlands, suitable for a solid floatland layer.
  1772. # type: float
  1773. # mgv7_float_taper_exp = 2.0
  1774. # Adjusts the density of the floatland layer.
  1775. # Increase value to increase density. Can be positive or negative.
  1776. # Value = 0.0: 50% of volume is floatland.
  1777. # Value = 2.0 (can be higher depending on 'mgv7_np_floatland', always test
  1778. # to be sure) creates a solid floatland layer.
  1779. # type: float
  1780. # mgv7_floatland_density = -0.6
  1781. # Surface level of optional water placed on a solid floatland layer.
  1782. # Water is disabled by default and will only be placed if this value is set
  1783. # to above 'mgv7_floatland_ymax' - 'mgv7_floatland_taper' (the start of the
  1784. # upper tapering).
  1785. # ***WARNING, POTENTIAL DANGER TO WORLDS AND SERVER PERFORMANCE***:
  1786. # When enabling water placement the floatlands must be configured and tested
  1787. # to be a solid layer by setting 'mgv7_floatland_density' to 2.0 (or other
  1788. # required value depending on 'mgv7_np_floatland'), to avoid
  1789. # server-intensive extreme water flow and to avoid vast flooding of the
  1790. # world surface below.
  1791. # type: int
  1792. # mgv7_floatland_ywater = -31000
  1793. # Controls width of tunnels, a smaller value creates wider tunnels.
  1794. # Value >= 10.0 completely disables generation of tunnels and avoids the
  1795. # intensive noise calculations.
  1796. # type: float
  1797. # mgv7_cave_width = 0.09
  1798. # Y of upper limit of large caves.
  1799. # type: int
  1800. # mgv7_large_cave_depth = -33
  1801. # Minimum limit of random number of small caves per mapchunk.
  1802. # type: int min: 0 max: 256
  1803. # mgv7_small_cave_num_min = 0
  1804. # Maximum limit of random number of small caves per mapchunk.
  1805. # type: int min: 0 max: 256
  1806. # mgv7_small_cave_num_max = 0
  1807. # Minimum limit of random number of large caves per mapchunk.
  1808. # type: int min: 0 max: 64
  1809. # mgv7_large_cave_num_min = 0
  1810. # Maximum limit of random number of large caves per mapchunk.
  1811. # type: int min: 0 max: 64
  1812. # mgv7_large_cave_num_max = 2
  1813. # Proportion of large caves that contain liquid.
  1814. # type: float min: 0 max: 1
  1815. # mgv7_large_cave_flooded = 0.5
  1816. # Y-level of cavern upper limit.
  1817. # type: int
  1818. # mgv7_cavern_limit = -256
  1819. # Y-distance over which caverns expand to full size.
  1820. # type: int
  1821. # mgv7_cavern_taper = 256
  1822. # Defines full size of caverns, smaller values create larger caverns.
  1823. # type: float
  1824. # mgv7_cavern_threshold = 0.7
  1825. # Lower Y limit of dungeons.
  1826. # type: int
  1827. # mgv7_dungeon_ymin = -31000
  1828. # Upper Y limit of dungeons.
  1829. # type: int
  1830. # mgv7_dungeon_ymax = 31000
  1831. ### Noises
  1832. # Y-level of higher terrain that creates cliffs.
  1833. # type: noise_params_2d
  1834. # mgv7_np_terrain_base = {
  1835. # offset = 4,
  1836. # scale = 70,
  1837. # spread = (600, 600, 600),
  1838. # seed = 82341,
  1839. # octaves = 5,
  1840. # persistence = 0.6,
  1841. # lacunarity = 2.0,
  1842. # flags = eased
  1843. # }
  1844. # Y-level of lower terrain and seabed.
  1845. # type: noise_params_2d
  1846. # mgv7_np_terrain_alt = {
  1847. # offset = 4,
  1848. # scale = 25,
  1849. # spread = (600, 600, 600),
  1850. # seed = 5934,
  1851. # octaves = 5,
  1852. # persistence = 0.6,
  1853. # lacunarity = 2.0,
  1854. # flags = eased
  1855. # }
  1856. # Varies roughness of terrain.
  1857. # Defines the 'persistence' value for terrain_base and terrain_alt noises.
  1858. # type: noise_params_2d
  1859. # mgv7_np_terrain_persist = {
  1860. # offset = 0.6,
  1861. # scale = 0.1,
  1862. # spread = (2000, 2000, 2000),
  1863. # seed = 539,
  1864. # octaves = 3,
  1865. # persistence = 0.6,
  1866. # lacunarity = 2.0,
  1867. # flags = eased
  1868. # }
  1869. # Defines distribution of higher terrain and steepness of cliffs.
  1870. # type: noise_params_2d
  1871. # mgv7_np_height_select = {
  1872. # offset = -8,
  1873. # scale = 16,
  1874. # spread = (500, 500, 500),
  1875. # seed = 4213,
  1876. # octaves = 6,
  1877. # persistence = 0.7,
  1878. # lacunarity = 2.0,
  1879. # flags = eased
  1880. # }
  1881. # Variation of biome filler depth.
  1882. # type: noise_params_2d
  1883. # mgv7_np_filler_depth = {
  1884. # offset = 0,
  1885. # scale = 1.2,
  1886. # spread = (150, 150, 150),
  1887. # seed = 261,
  1888. # octaves = 3,
  1889. # persistence = 0.7,
  1890. # lacunarity = 2.0,
  1891. # flags = eased
  1892. # }
  1893. # Variation of maximum mountain height (in nodes).
  1894. # type: noise_params_2d
  1895. # mgv7_np_mount_height = {
  1896. # offset = 256,
  1897. # scale = 112,
  1898. # spread = (1000, 1000, 1000),
  1899. # seed = 72449,
  1900. # octaves = 3,
  1901. # persistence = 0.6,
  1902. # lacunarity = 2.0,
  1903. # flags = eased
  1904. # }
  1905. # Defines large-scale river channel structure.
  1906. # type: noise_params_2d
  1907. # mgv7_np_ridge_uwater = {
  1908. # offset = 0,
  1909. # scale = 1,
  1910. # spread = (1000, 1000, 1000),
  1911. # seed = 85039,
  1912. # octaves = 5,
  1913. # persistence = 0.6,
  1914. # lacunarity = 2.0,
  1915. # flags = eased
  1916. # }
  1917. # 3D noise defining mountain structure and height.
  1918. # Also defines structure of floatland mountain terrain.
  1919. # type: noise_params_3d
  1920. # mgv7_np_mountain = {
  1921. # offset = -0.6,
  1922. # scale = 1,
  1923. # spread = (250, 350, 250),
  1924. # seed = 5333,
  1925. # octaves = 5,
  1926. # persistence = 0.63,
  1927. # lacunarity = 2.0,
  1928. # flags =
  1929. # }
  1930. # 3D noise defining structure of river canyon walls.
  1931. # type: noise_params_3d
  1932. # mgv7_np_ridge = {
  1933. # offset = 0,
  1934. # scale = 1,
  1935. # spread = (100, 100, 100),
  1936. # seed = 6467,
  1937. # octaves = 4,
  1938. # persistence = 0.75,
  1939. # lacunarity = 2.0,
  1940. # flags =
  1941. # }
  1942. # 3D noise defining structure of floatlands.
  1943. # If altered from the default, the noise 'scale' (0.7 by default) may need
  1944. # to be adjusted, as floatland tapering functions best when this noise has
  1945. # a value range of approximately -2.0 to 2.0.
  1946. # type: noise_params_3d
  1947. # mgv7_np_floatland = {
  1948. # offset = 0,
  1949. # scale = 0.7,
  1950. # spread = (384, 96, 384),
  1951. # seed = 1009,
  1952. # octaves = 4,
  1953. # persistence = 0.75,
  1954. # lacunarity = 1.618,
  1955. # flags =
  1956. # }
  1957. # 3D noise defining giant caverns.
  1958. # type: noise_params_3d
  1959. # mgv7_np_cavern = {
  1960. # offset = 0,
  1961. # scale = 1,
  1962. # spread = (384, 128, 384),
  1963. # seed = 723,
  1964. # octaves = 5,
  1965. # persistence = 0.63,
  1966. # lacunarity = 2.0,
  1967. # flags =
  1968. # }
  1969. # First of two 3D noises that together define tunnels.
  1970. # type: noise_params_3d
  1971. # mgv7_np_cave1 = {
  1972. # offset = 0,
  1973. # scale = 12,
  1974. # spread = (61, 61, 61),
  1975. # seed = 52534,
  1976. # octaves = 3,
  1977. # persistence = 0.5,
  1978. # lacunarity = 2.0,
  1979. # flags =
  1980. # }
  1981. # Second of two 3D noises that together define tunnels.
  1982. # type: noise_params_3d
  1983. # mgv7_np_cave2 = {
  1984. # offset = 0,
  1985. # scale = 12,
  1986. # spread = (67, 67, 67),
  1987. # seed = 10325,
  1988. # octaves = 3,
  1989. # persistence = 0.5,
  1990. # lacunarity = 2.0,
  1991. # flags =
  1992. # }
  1993. # 3D noise that determines number of dungeons per mapchunk.
  1994. # type: noise_params_3d
  1995. # mgv7_np_dungeons = {
  1996. # offset = 0.9,
  1997. # scale = 0.5,
  1998. # spread = (500, 500, 500),
  1999. # seed = 0,
  2000. # octaves = 2,
  2001. # persistence = 0.8,
  2002. # lacunarity = 2.0,
  2003. # flags =
  2004. # }
  2005. ## Mapgen Carpathian
  2006. # Map generation attributes specific to Mapgen Carpathian.
  2007. # type: flags possible values: caverns, rivers, nocaverns, norivers
  2008. # mgcarpathian_spflags = caverns,norivers
  2009. # Defines the base ground level.
  2010. # type: float
  2011. # mgcarpathian_base_level = 12.0
  2012. # Defines the width of the river channel.
  2013. # type: float
  2014. # mgcarpathian_river_width = 0.05
  2015. # Defines the depth of the river channel.
  2016. # type: float
  2017. # mgcarpathian_river_depth = 24.0
  2018. # Defines the width of the river valley.
  2019. # type: float
  2020. # mgcarpathian_valley_width = 0.25
  2021. # Controls width of tunnels, a smaller value creates wider tunnels.
  2022. # Value >= 10.0 completely disables generation of tunnels and avoids the
  2023. # intensive noise calculations.
  2024. # type: float
  2025. # mgcarpathian_cave_width = 0.09
  2026. # Y of upper limit of large caves.
  2027. # type: int
  2028. # mgcarpathian_large_cave_depth = -33
  2029. # Minimum limit of random number of small caves per mapchunk.
  2030. # type: int min: 0 max: 256
  2031. # mgcarpathian_small_cave_num_min = 0
  2032. # Maximum limit of random number of small caves per mapchunk.
  2033. # type: int min: 0 max: 256
  2034. # mgcarpathian_small_cave_num_max = 0
  2035. # Minimum limit of random number of large caves per mapchunk.
  2036. # type: int min: 0 max: 64
  2037. # mgcarpathian_large_cave_num_min = 0
  2038. # Maximum limit of random number of large caves per mapchunk.
  2039. # type: int min: 0 max: 64
  2040. # mgcarpathian_large_cave_num_max = 2
  2041. # Proportion of large caves that contain liquid.
  2042. # type: float min: 0 max: 1
  2043. # mgcarpathian_large_cave_flooded = 0.5
  2044. # Y-level of cavern upper limit.
  2045. # type: int
  2046. # mgcarpathian_cavern_limit = -256
  2047. # Y-distance over which caverns expand to full size.
  2048. # type: int
  2049. # mgcarpathian_cavern_taper = 256
  2050. # Defines full size of caverns, smaller values create larger caverns.
  2051. # type: float
  2052. # mgcarpathian_cavern_threshold = 0.7
  2053. # Lower Y limit of dungeons.
  2054. # type: int
  2055. # mgcarpathian_dungeon_ymin = -31000
  2056. # Upper Y limit of dungeons.
  2057. # type: int
  2058. # mgcarpathian_dungeon_ymax = 31000
  2059. ### Noises
  2060. # Variation of biome filler depth.
  2061. # type: noise_params_2d
  2062. # mgcarpathian_np_filler_depth = {
  2063. # offset = 0,
  2064. # scale = 1,
  2065. # spread = (128, 128, 128),
  2066. # seed = 261,
  2067. # octaves = 3,
  2068. # persistence = 0.7,
  2069. # lacunarity = 2.0,
  2070. # flags = eased
  2071. # }
  2072. # First of 4 2D noises that together define hill/mountain range height.
  2073. # type: noise_params_2d
  2074. # mgcarpathian_np_height1 = {
  2075. # offset = 0,
  2076. # scale = 5,
  2077. # spread = (251, 251, 251),
  2078. # seed = 9613,
  2079. # octaves = 5,
  2080. # persistence = 0.5,
  2081. # lacunarity = 2.0,
  2082. # flags = eased
  2083. # }
  2084. # Second of 4 2D noises that together define hill/mountain range height.
  2085. # type: noise_params_2d
  2086. # mgcarpathian_np_height2 = {
  2087. # offset = 0,
  2088. # scale = 5,
  2089. # spread = (383, 383, 383),
  2090. # seed = 1949,
  2091. # octaves = 5,
  2092. # persistence = 0.5,
  2093. # lacunarity = 2.0,
  2094. # flags = eased
  2095. # }
  2096. # Third of 4 2D noises that together define hill/mountain range height.
  2097. # type: noise_params_2d
  2098. # mgcarpathian_np_height3 = {
  2099. # offset = 0,
  2100. # scale = 5,
  2101. # spread = (509, 509, 509),
  2102. # seed = 3211,
  2103. # octaves = 5,
  2104. # persistence = 0.5,
  2105. # lacunarity = 2.0,
  2106. # flags = eased
  2107. # }
  2108. # Fourth of 4 2D noises that together define hill/mountain range height.
  2109. # type: noise_params_2d
  2110. # mgcarpathian_np_height4 = {
  2111. # offset = 0,
  2112. # scale = 5,
  2113. # spread = (631, 631, 631),
  2114. # seed = 1583,
  2115. # octaves = 5,
  2116. # persistence = 0.5,
  2117. # lacunarity = 2.0,
  2118. # flags = eased
  2119. # }
  2120. # 2D noise that controls the size/occurrence of rolling hills.
  2121. # type: noise_params_2d
  2122. # mgcarpathian_np_hills_terrain = {
  2123. # offset = 1,
  2124. # scale = 1,
  2125. # spread = (1301, 1301, 1301),
  2126. # seed = 1692,
  2127. # octaves = 3,
  2128. # persistence = 0.5,
  2129. # lacunarity = 2.0,
  2130. # flags = eased
  2131. # }
  2132. # 2D noise that controls the size/occurrence of ridged mountain ranges.
  2133. # type: noise_params_2d
  2134. # mgcarpathian_np_ridge_terrain = {
  2135. # offset = 1,
  2136. # scale = 1,
  2137. # spread = (1889, 1889, 1889),
  2138. # seed = 3568,
  2139. # octaves = 3,
  2140. # persistence = 0.5,
  2141. # lacunarity = 2.0,
  2142. # flags = eased
  2143. # }
  2144. # 2D noise that controls the size/occurrence of step mountain ranges.
  2145. # type: noise_params_2d
  2146. # mgcarpathian_np_step_terrain = {
  2147. # offset = 1,
  2148. # scale = 1,
  2149. # spread = (1889, 1889, 1889),
  2150. # seed = 4157,
  2151. # octaves = 3,
  2152. # persistence = 0.5,
  2153. # lacunarity = 2.0,
  2154. # flags = eased
  2155. # }
  2156. # 2D noise that controls the shape/size of rolling hills.
  2157. # type: noise_params_2d
  2158. # mgcarpathian_np_hills = {
  2159. # offset = 0,
  2160. # scale = 3,
  2161. # spread = (257, 257, 257),
  2162. # seed = 6604,
  2163. # octaves = 6,
  2164. # persistence = 0.5,
  2165. # lacunarity = 2.0,
  2166. # flags = eased
  2167. # }
  2168. # 2D noise that controls the shape/size of ridged mountains.
  2169. # type: noise_params_2d
  2170. # mgcarpathian_np_ridge_mnt = {
  2171. # offset = 0,
  2172. # scale = 12,
  2173. # spread = (743, 743, 743),
  2174. # seed = 5520,
  2175. # octaves = 6,
  2176. # persistence = 0.7,
  2177. # lacunarity = 2.0,
  2178. # flags = eased
  2179. # }
  2180. # 2D noise that controls the shape/size of step mountains.
  2181. # type: noise_params_2d
  2182. # mgcarpathian_np_step_mnt = {
  2183. # offset = 0,
  2184. # scale = 8,
  2185. # spread = (509, 509, 509),
  2186. # seed = 2590,
  2187. # octaves = 6,
  2188. # persistence = 0.6,
  2189. # lacunarity = 2.0,
  2190. # flags = eased
  2191. # }
  2192. # 2D noise that locates the river valleys and channels.
  2193. # type: noise_params_2d
  2194. # mgcarpathian_np_rivers = {
  2195. # offset = 0,
  2196. # scale = 1,
  2197. # spread = (1000, 1000, 1000),
  2198. # seed = 85039,
  2199. # octaves = 5,
  2200. # persistence = 0.6,
  2201. # lacunarity = 2.0,
  2202. # flags = eased
  2203. # }
  2204. # 3D noise for mountain overhangs, cliffs, etc. Usually small variations.
  2205. # type: noise_params_3d
  2206. # mgcarpathian_np_mnt_var = {
  2207. # offset = 0,
  2208. # scale = 1,
  2209. # spread = (499, 499, 499),
  2210. # seed = 2490,
  2211. # octaves = 5,
  2212. # persistence = 0.55,
  2213. # lacunarity = 2.0,
  2214. # flags =
  2215. # }
  2216. # First of two 3D noises that together define tunnels.
  2217. # type: noise_params_3d
  2218. # mgcarpathian_np_cave1 = {
  2219. # offset = 0,
  2220. # scale = 12,
  2221. # spread = (61, 61, 61),
  2222. # seed = 52534,
  2223. # octaves = 3,
  2224. # persistence = 0.5,
  2225. # lacunarity = 2.0,
  2226. # flags =
  2227. # }
  2228. # Second of two 3D noises that together define tunnels.
  2229. # type: noise_params_3d
  2230. # mgcarpathian_np_cave2 = {
  2231. # offset = 0,
  2232. # scale = 12,
  2233. # spread = (67, 67, 67),
  2234. # seed = 10325,
  2235. # octaves = 3,
  2236. # persistence = 0.5,
  2237. # lacunarity = 2.0,
  2238. # flags =
  2239. # }
  2240. # 3D noise defining giant caverns.
  2241. # type: noise_params_3d
  2242. # mgcarpathian_np_cavern = {
  2243. # offset = 0,
  2244. # scale = 1,
  2245. # spread = (384, 128, 384),
  2246. # seed = 723,
  2247. # octaves = 5,
  2248. # persistence = 0.63,
  2249. # lacunarity = 2.0,
  2250. # flags =
  2251. # }
  2252. # 3D noise that determines number of dungeons per mapchunk.
  2253. # type: noise_params_3d
  2254. # mgcarpathian_np_dungeons = {
  2255. # offset = 0.9,
  2256. # scale = 0.5,
  2257. # spread = (500, 500, 500),
  2258. # seed = 0,
  2259. # octaves = 2,
  2260. # persistence = 0.8,
  2261. # lacunarity = 2.0,
  2262. # flags =
  2263. # }
  2264. ## Mapgen Flat
  2265. # Map generation attributes specific to Mapgen Flat.
  2266. # Occasional lakes and hills can be added to the flat world.
  2267. # type: flags possible values: lakes, hills, caverns, nolakes, nohills, nocaverns
  2268. # mgflat_spflags = nolakes,nohills,nocaverns
  2269. # Y of flat ground.
  2270. # type: int
  2271. # mgflat_ground_level = 8
  2272. # Y of upper limit of large caves.
  2273. # type: int
  2274. # mgflat_large_cave_depth = -33
  2275. # Minimum limit of random number of small caves per mapchunk.
  2276. # type: int min: 0 max: 256
  2277. # mgflat_small_cave_num_min = 0
  2278. # Maximum limit of random number of small caves per mapchunk.
  2279. # type: int min: 0 max: 256
  2280. # mgflat_small_cave_num_max = 0
  2281. # Minimum limit of random number of large caves per mapchunk.
  2282. # type: int min: 0 max: 64
  2283. # mgflat_large_cave_num_min = 0
  2284. # Maximum limit of random number of large caves per mapchunk.
  2285. # type: int min: 0 max: 64
  2286. # mgflat_large_cave_num_max = 2
  2287. # Proportion of large caves that contain liquid.
  2288. # type: float min: 0 max: 1
  2289. # mgflat_large_cave_flooded = 0.5
  2290. # Controls width of tunnels, a smaller value creates wider tunnels.
  2291. # Value >= 10.0 completely disables generation of tunnels and avoids the
  2292. # intensive noise calculations.
  2293. # type: float
  2294. # mgflat_cave_width = 0.09
  2295. # Terrain noise threshold for lakes.
  2296. # Controls proportion of world area covered by lakes.
  2297. # Adjust towards 0.0 for a larger proportion.
  2298. # type: float
  2299. # mgflat_lake_threshold = -0.45
  2300. # Controls steepness/depth of lake depressions.
  2301. # type: float
  2302. # mgflat_lake_steepness = 48.0
  2303. # Terrain noise threshold for hills.
  2304. # Controls proportion of world area covered by hills.
  2305. # Adjust towards 0.0 for a larger proportion.
  2306. # type: float
  2307. # mgflat_hill_threshold = 0.45
  2308. # Controls steepness/height of hills.
  2309. # type: float
  2310. # mgflat_hill_steepness = 64.0
  2311. # Y-level of cavern upper limit.
  2312. # type: int
  2313. # mgflat_cavern_limit = -256
  2314. # Y-distance over which caverns expand to full size.
  2315. # type: int
  2316. # mgflat_cavern_taper = 256
  2317. # Defines full size of caverns, smaller values create larger caverns.
  2318. # type: float
  2319. # mgflat_cavern_threshold = 0.7
  2320. # Lower Y limit of dungeons.
  2321. # type: int
  2322. # mgflat_dungeon_ymin = -31000
  2323. # Upper Y limit of dungeons.
  2324. # type: int
  2325. # mgflat_dungeon_ymax = 31000
  2326. ### Noises
  2327. # Defines location and terrain of optional hills and lakes.
  2328. # type: noise_params_2d
  2329. # mgflat_np_terrain = {
  2330. # offset = 0,
  2331. # scale = 1,
  2332. # spread = (600, 600, 600),
  2333. # seed = 7244,
  2334. # octaves = 5,
  2335. # persistence = 0.6,
  2336. # lacunarity = 2.0,
  2337. # flags = eased
  2338. # }
  2339. # Variation of biome filler depth.
  2340. # type: noise_params_2d
  2341. # mgflat_np_filler_depth = {
  2342. # offset = 0,
  2343. # scale = 1.2,
  2344. # spread = (150, 150, 150),
  2345. # seed = 261,
  2346. # octaves = 3,
  2347. # persistence = 0.7,
  2348. # lacunarity = 2.0,
  2349. # flags = eased
  2350. # }
  2351. # First of two 3D noises that together define tunnels.
  2352. # type: noise_params_3d
  2353. # mgflat_np_cave1 = {
  2354. # offset = 0,
  2355. # scale = 12,
  2356. # spread = (61, 61, 61),
  2357. # seed = 52534,
  2358. # octaves = 3,
  2359. # persistence = 0.5,
  2360. # lacunarity = 2.0,
  2361. # flags =
  2362. # }
  2363. # Second of two 3D noises that together define tunnels.
  2364. # type: noise_params_3d
  2365. # mgflat_np_cave2 = {
  2366. # offset = 0,
  2367. # scale = 12,
  2368. # spread = (67, 67, 67),
  2369. # seed = 10325,
  2370. # octaves = 3,
  2371. # persistence = 0.5,
  2372. # lacunarity = 2.0,
  2373. # flags =
  2374. # }
  2375. # 3D noise defining giant caverns.
  2376. # type: noise_params_3d
  2377. # mgflat_np_cavern = {
  2378. # offset = 0,
  2379. # scale = 1,
  2380. # spread = (384, 128, 384),
  2381. # seed = 723,
  2382. # octaves = 5,
  2383. # persistence = 0.63,
  2384. # lacunarity = 2.0,
  2385. # flags =
  2386. # }
  2387. # 3D noise that determines number of dungeons per mapchunk.
  2388. # type: noise_params_3d
  2389. # mgflat_np_dungeons = {
  2390. # offset = 0.9,
  2391. # scale = 0.5,
  2392. # spread = (500, 500, 500),
  2393. # seed = 0,
  2394. # octaves = 2,
  2395. # persistence = 0.8,
  2396. # lacunarity = 2.0,
  2397. # flags =
  2398. # }
  2399. ## Mapgen Fractal
  2400. # Map generation attributes specific to Mapgen Fractal.
  2401. # 'terrain' enables the generation of non-fractal terrain:
  2402. # ocean, islands and underground.
  2403. # type: flags possible values: terrain, noterrain
  2404. # mgfractal_spflags = terrain
  2405. # Controls width of tunnels, a smaller value creates wider tunnels.
  2406. # Value >= 10.0 completely disables generation of tunnels and avoids the
  2407. # intensive noise calculations.
  2408. # type: float
  2409. # mgfractal_cave_width = 0.09
  2410. # Y of upper limit of large caves.
  2411. # type: int
  2412. # mgfractal_large_cave_depth = -33
  2413. # Minimum limit of random number of small caves per mapchunk.
  2414. # type: int min: 0 max: 256
  2415. # mgfractal_small_cave_num_min = 0
  2416. # Maximum limit of random number of small caves per mapchunk.
  2417. # type: int min: 0 max: 256
  2418. # mgfractal_small_cave_num_max = 0
  2419. # Minimum limit of random number of large caves per mapchunk.
  2420. # type: int min: 0 max: 64
  2421. # mgfractal_large_cave_num_min = 0
  2422. # Maximum limit of random number of large caves per mapchunk.
  2423. # type: int min: 0 max: 64
  2424. # mgfractal_large_cave_num_max = 2
  2425. # Proportion of large caves that contain liquid.
  2426. # type: float min: 0 max: 1
  2427. # mgfractal_large_cave_flooded = 0.5
  2428. # Lower Y limit of dungeons.
  2429. # type: int
  2430. # mgfractal_dungeon_ymin = -31000
  2431. # Upper Y limit of dungeons.
  2432. # type: int
  2433. # mgfractal_dungeon_ymax = 31000
  2434. # Selects one of 18 fractal types.
  2435. # 1 = 4D "Roundy" Mandelbrot set.
  2436. # 2 = 4D "Roundy" Julia set.
  2437. # 3 = 4D "Squarry" Mandelbrot set.
  2438. # 4 = 4D "Squarry" Julia set.
  2439. # 5 = 4D "Mandy Cousin" Mandelbrot set.
  2440. # 6 = 4D "Mandy Cousin" Julia set.
  2441. # 7 = 4D "Variation" Mandelbrot set.
  2442. # 8 = 4D "Variation" Julia set.
  2443. # 9 = 3D "Mandelbrot/Mandelbar" Mandelbrot set.
  2444. # 10 = 3D "Mandelbrot/Mandelbar" Julia set.
  2445. # 11 = 3D "Christmas Tree" Mandelbrot set.
  2446. # 12 = 3D "Christmas Tree" Julia set.
  2447. # 13 = 3D "Mandelbulb" Mandelbrot set.
  2448. # 14 = 3D "Mandelbulb" Julia set.
  2449. # 15 = 3D "Cosine Mandelbulb" Mandelbrot set.
  2450. # 16 = 3D "Cosine Mandelbulb" Julia set.
  2451. # 17 = 4D "Mandelbulb" Mandelbrot set.
  2452. # 18 = 4D "Mandelbulb" Julia set.
  2453. # type: int min: 1 max: 18
  2454. # mgfractal_fractal = 1
  2455. # Iterations of the recursive function.
  2456. # Increasing this increases the amount of fine detail, but also
  2457. # increases processing load.
  2458. # At iterations = 20 this mapgen has a similar load to mapgen V7.
  2459. # type: int
  2460. # mgfractal_iterations = 11
  2461. # (X,Y,Z) scale of fractal in nodes.
  2462. # Actual fractal size will be 2 to 3 times larger.
  2463. # These numbers can be made very large, the fractal does
  2464. # not have to fit inside the world.
  2465. # Increase these to 'zoom' into the detail of the fractal.
  2466. # Default is for a vertically-squashed shape suitable for
  2467. # an island, set all 3 numbers equal for the raw shape.
  2468. # type: v3f
  2469. # mgfractal_scale = (4096.0, 1024.0, 4096.0)
  2470. # (X,Y,Z) offset of fractal from world center in units of 'scale'.
  2471. # Can be used to move a desired point to (0, 0) to create a
  2472. # suitable spawn point, or to allow 'zooming in' on a desired
  2473. # point by increasing 'scale'.
  2474. # The default is tuned for a suitable spawn point for Mandelbrot
  2475. # sets with default parameters, it may need altering in other
  2476. # situations.
  2477. # Range roughly -2 to 2. Multiply by 'scale' for offset in nodes.
  2478. # type: v3f
  2479. # mgfractal_offset = (1.79, 0.0, 0.0)
  2480. # W coordinate of the generated 3D slice of a 4D fractal.
  2481. # Determines which 3D slice of the 4D shape is generated.
  2482. # Alters the shape of the fractal.
  2483. # Has no effect on 3D fractals.
  2484. # Range roughly -2 to 2.
  2485. # type: float
  2486. # mgfractal_slice_w = 0.0
  2487. # Julia set only.
  2488. # X component of hypercomplex constant.
  2489. # Alters the shape of the fractal.
  2490. # Range roughly -2 to 2.
  2491. # type: float
  2492. # mgfractal_julia_x = 0.33
  2493. # Julia set only.
  2494. # Y component of hypercomplex constant.
  2495. # Alters the shape of the fractal.
  2496. # Range roughly -2 to 2.
  2497. # type: float
  2498. # mgfractal_julia_y = 0.33
  2499. # Julia set only.
  2500. # Z component of hypercomplex constant.
  2501. # Alters the shape of the fractal.
  2502. # Range roughly -2 to 2.
  2503. # type: float
  2504. # mgfractal_julia_z = 0.33
  2505. # Julia set only.
  2506. # W component of hypercomplex constant.
  2507. # Alters the shape of the fractal.
  2508. # Has no effect on 3D fractals.
  2509. # Range roughly -2 to 2.
  2510. # type: float
  2511. # mgfractal_julia_w = 0.33
  2512. ### Noises
  2513. # Y-level of seabed.
  2514. # type: noise_params_2d
  2515. # mgfractal_np_seabed = {
  2516. # offset = -14,
  2517. # scale = 9,
  2518. # spread = (600, 600, 600),
  2519. # seed = 41900,
  2520. # octaves = 5,
  2521. # persistence = 0.6,
  2522. # lacunarity = 2.0,
  2523. # flags = eased
  2524. # }
  2525. # Variation of biome filler depth.
  2526. # type: noise_params_2d
  2527. # mgfractal_np_filler_depth = {
  2528. # offset = 0,
  2529. # scale = 1.2,
  2530. # spread = (150, 150, 150),
  2531. # seed = 261,
  2532. # octaves = 3,
  2533. # persistence = 0.7,
  2534. # lacunarity = 2.0,
  2535. # flags = eased
  2536. # }
  2537. # First of two 3D noises that together define tunnels.
  2538. # type: noise_params_3d
  2539. # mgfractal_np_cave1 = {
  2540. # offset = 0,
  2541. # scale = 12,
  2542. # spread = (61, 61, 61),
  2543. # seed = 52534,
  2544. # octaves = 3,
  2545. # persistence = 0.5,
  2546. # lacunarity = 2.0,
  2547. # flags =
  2548. # }
  2549. # Second of two 3D noises that together define tunnels.
  2550. # type: noise_params_3d
  2551. # mgfractal_np_cave2 = {
  2552. # offset = 0,
  2553. # scale = 12,
  2554. # spread = (67, 67, 67),
  2555. # seed = 10325,
  2556. # octaves = 3,
  2557. # persistence = 0.5,
  2558. # lacunarity = 2.0,
  2559. # flags =
  2560. # }
  2561. # 3D noise that determines number of dungeons per mapchunk.
  2562. # type: noise_params_3d
  2563. # mgfractal_np_dungeons = {
  2564. # offset = 0.9,
  2565. # scale = 0.5,
  2566. # spread = (500, 500, 500),
  2567. # seed = 0,
  2568. # octaves = 2,
  2569. # persistence = 0.8,
  2570. # lacunarity = 2.0,
  2571. # flags =
  2572. # }
  2573. ## Mapgen Valleys
  2574. # Map generation attributes specific to Mapgen Valleys.
  2575. # 'altitude_chill': Reduces heat with altitude.
  2576. # 'humid_rivers': Increases humidity around rivers.
  2577. # 'vary_river_depth': If enabled, low humidity and high heat causes rivers
  2578. # to become shallower and occasionally dry.
  2579. # 'altitude_dry': Reduces humidity with altitude.
  2580. # type: flags possible values: altitude_chill, humid_rivers, vary_river_depth, altitude_dry, noaltitude_chill, nohumid_rivers, novary_river_depth, noaltitude_dry
  2581. # mgvalleys_spflags = altitude_chill,humid_rivers,vary_river_depth,altitude_dry
  2582. # The vertical distance over which heat drops by 20 if 'altitude_chill' is
  2583. # enabled. Also the vertical distance over which humidity drops by 10 if
  2584. # 'altitude_dry' is enabled.
  2585. # type: int
  2586. # mgvalleys_altitude_chill = 90
  2587. # Depth below which you'll find large caves.
  2588. # type: int
  2589. # mgvalleys_large_cave_depth = -33
  2590. # Minimum limit of random number of small caves per mapchunk.
  2591. # type: int min: 0 max: 256
  2592. # mgvalleys_small_cave_num_min = 0
  2593. # Maximum limit of random number of small caves per mapchunk.
  2594. # type: int min: 0 max: 256
  2595. # mgvalleys_small_cave_num_max = 0
  2596. # Minimum limit of random number of large caves per mapchunk.
  2597. # type: int min: 0 max: 64
  2598. # mgvalleys_large_cave_num_min = 0
  2599. # Maximum limit of random number of large caves per mapchunk.
  2600. # type: int min: 0 max: 64
  2601. # mgvalleys_large_cave_num_max = 2
  2602. # Proportion of large caves that contain liquid.
  2603. # type: float min: 0 max: 1
  2604. # mgvalleys_large_cave_flooded = 0.5
  2605. # Depth below which you'll find giant caverns.
  2606. # type: int
  2607. # mgvalleys_cavern_limit = -256
  2608. # Y-distance over which caverns expand to full size.
  2609. # type: int
  2610. # mgvalleys_cavern_taper = 192
  2611. # Defines full size of caverns, smaller values create larger caverns.
  2612. # type: float
  2613. # mgvalleys_cavern_threshold = 0.6
  2614. # How deep to make rivers.
  2615. # type: int
  2616. # mgvalleys_river_depth = 4
  2617. # How wide to make rivers.
  2618. # type: int
  2619. # mgvalleys_river_size = 5
  2620. # Controls width of tunnels, a smaller value creates wider tunnels.
  2621. # Value >= 10.0 completely disables generation of tunnels and avoids the
  2622. # intensive noise calculations.
  2623. # type: float
  2624. # mgvalleys_cave_width = 0.09
  2625. # Lower Y limit of dungeons.
  2626. # type: int
  2627. # mgvalleys_dungeon_ymin = -31000
  2628. # Upper Y limit of dungeons.
  2629. # type: int
  2630. # mgvalleys_dungeon_ymax = 63
  2631. ### Noises
  2632. # First of two 3D noises that together define tunnels.
  2633. # type: noise_params_3d
  2634. # mgvalleys_np_cave1 = {
  2635. # offset = 0,
  2636. # scale = 12,
  2637. # spread = (61, 61, 61),
  2638. # seed = 52534,
  2639. # octaves = 3,
  2640. # persistence = 0.5,
  2641. # lacunarity = 2.0,
  2642. # flags =
  2643. # }
  2644. # Second of two 3D noises that together define tunnels.
  2645. # type: noise_params_3d
  2646. # mgvalleys_np_cave2 = {
  2647. # offset = 0,
  2648. # scale = 12,
  2649. # spread = (67, 67, 67),
  2650. # seed = 10325,
  2651. # octaves = 3,
  2652. # persistence = 0.5,
  2653. # lacunarity = 2.0,
  2654. # flags =
  2655. # }
  2656. # The depth of dirt or other biome filler node.
  2657. # type: noise_params_2d
  2658. # mgvalleys_np_filler_depth = {
  2659. # offset = 0,
  2660. # scale = 1.2,
  2661. # spread = (256, 256, 256),
  2662. # seed = 1605,
  2663. # octaves = 3,
  2664. # persistence = 0.5,
  2665. # lacunarity = 2.0,
  2666. # flags = eased
  2667. # }
  2668. # 3D noise defining giant caverns.
  2669. # type: noise_params_3d
  2670. # mgvalleys_np_cavern = {
  2671. # offset = 0,
  2672. # scale = 1,
  2673. # spread = (768, 256, 768),
  2674. # seed = 59033,
  2675. # octaves = 6,
  2676. # persistence = 0.63,
  2677. # lacunarity = 2.0,
  2678. # flags =
  2679. # }
  2680. # Defines large-scale river channel structure.
  2681. # type: noise_params_2d
  2682. # mgvalleys_np_rivers = {
  2683. # offset = 0,
  2684. # scale = 1,
  2685. # spread = (256, 256, 256),
  2686. # seed = -6050,
  2687. # octaves = 5,
  2688. # persistence = 0.6,
  2689. # lacunarity = 2.0,
  2690. # flags = eased
  2691. # }
  2692. # Base terrain height.
  2693. # type: noise_params_2d
  2694. # mgvalleys_np_terrain_height = {
  2695. # offset = -10,
  2696. # scale = 50,
  2697. # spread = (1024, 1024, 1024),
  2698. # seed = 5202,
  2699. # octaves = 6,
  2700. # persistence = 0.4,
  2701. # lacunarity = 2.0,
  2702. # flags = eased
  2703. # }
  2704. # Raises terrain to make valleys around the rivers.
  2705. # type: noise_params_2d
  2706. # mgvalleys_np_valley_depth = {
  2707. # offset = 5,
  2708. # scale = 4,
  2709. # spread = (512, 512, 512),
  2710. # seed = -1914,
  2711. # octaves = 1,
  2712. # persistence = 1.0,
  2713. # lacunarity = 2.0,
  2714. # flags = eased
  2715. # }
  2716. # Slope and fill work together to modify the heights.
  2717. # type: noise_params_3d
  2718. # mgvalleys_np_inter_valley_fill = {
  2719. # offset = 0,
  2720. # scale = 1,
  2721. # spread = (256, 512, 256),
  2722. # seed = 1993,
  2723. # octaves = 6,
  2724. # persistence = 0.8,
  2725. # lacunarity = 2.0,
  2726. # flags =
  2727. # }
  2728. # Amplifies the valleys.
  2729. # type: noise_params_2d
  2730. # mgvalleys_np_valley_profile = {
  2731. # offset = 0.6,
  2732. # scale = 0.5,
  2733. # spread = (512, 512, 512),
  2734. # seed = 777,
  2735. # octaves = 1,
  2736. # persistence = 1.0,
  2737. # lacunarity = 2.0,
  2738. # flags = eased
  2739. # }
  2740. # Slope and fill work together to modify the heights.
  2741. # type: noise_params_2d
  2742. # mgvalleys_np_inter_valley_slope = {
  2743. # offset = 0.5,
  2744. # scale = 0.5,
  2745. # spread = (128, 128, 128),
  2746. # seed = 746,
  2747. # octaves = 1,
  2748. # persistence = 1.0,
  2749. # lacunarity = 2.0,
  2750. # flags = eased
  2751. # }
  2752. # 3D noise that determines number of dungeons per mapchunk.
  2753. # type: noise_params_3d
  2754. # mgvalleys_np_dungeons = {
  2755. # offset = 0.9,
  2756. # scale = 0.5,
  2757. # spread = (500, 500, 500),
  2758. # seed = 0,
  2759. # octaves = 2,
  2760. # persistence = 0.8,
  2761. # lacunarity = 2.0,
  2762. # flags =
  2763. # }
  2764. ## Advanced
  2765. # Size of mapchunks generated by mapgen, stated in mapblocks (16 nodes).
  2766. # WARNING!: There is no benefit, and there are several dangers, in
  2767. # increasing this value above 5.
  2768. # Reducing this value increases cave and dungeon density.
  2769. # Altering this value is for special usage, leaving it unchanged is
  2770. # recommended.
  2771. # type: int
  2772. # chunksize = 5
  2773. # Dump the mapgen debug information.
  2774. # type: bool
  2775. # enable_mapgen_debug_info = false
  2776. # Maximum number of blocks that can be queued for loading.
  2777. # type: int
  2778. # emergequeue_limit_total = 1024
  2779. # Maximum number of blocks to be queued that are to be loaded from file.
  2780. # This limit is enforced per player.
  2781. # type: int
  2782. # emergequeue_limit_diskonly = 128
  2783. # Maximum number of blocks to be queued that are to be generated.
  2784. # This limit is enforced per player.
  2785. # type: int
  2786. # emergequeue_limit_generate = 128
  2787. # Number of emerge threads to use.
  2788. # Value 0:
  2789. # - Automatic selection. The number of emerge threads will be
  2790. # - 'number of processors - 2', with a lower limit of 1.
  2791. # Any other value:
  2792. # - Specifies the number of emerge threads, with a lower limit of 1.
  2793. # WARNING: Increasing the number of emerge threads increases engine mapgen
  2794. # speed, but this may harm game performance by interfering with other
  2795. # processes, especially in singleplayer and/or when running Lua code in
  2796. # 'on_generated'. For many users the optimum setting may be '1'.
  2797. # type: int
  2798. # num_emerge_threads = 1
  2799. #
  2800. # Online Content Repository
  2801. #
  2802. # The URL for the content repository
  2803. # type: string
  2804. # contentdb_url = https://content.minetest.net
  2805. # Comma-separated list of flags to hide in the content repository.
  2806. # "nonfree" can be used to hide packages which do not qualify as 'free software',
  2807. # as defined by the Free Software Foundation.
  2808. # You can also specify content ratings.
  2809. # These flags are independent from Minetest versions,
  2810. # so see a full list at https://content.minetest.net/help/content_flags/
  2811. # type: string
  2812. # contentdb_flag_blacklist = nonfree, desktop_default
  2813. # Maximum number of concurrent downloads. Downloads exceeding this limit will be queued.
  2814. # This should be lower than curl_parallel_limit.
  2815. # type: int
  2816. # contentdb_max_concurrent_downloads = 3