README 6.0 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162
  1. odhcpd - Embedded DHCP/DHCPv6/RA Server & Relay
  2. ** Abstract **
  3. odhcpd is a daemon for serving and relaying IP management protocols to
  4. configure clients and downstream routers. It tries to follow the RFC 6204
  5. requirements for IPv6 home routers.
  6. odhcpd provides server services for DHCP, RA, stateless and stateful DHCPv6,
  7. prefix delegation and can be used to relay RA, DHCPv6 and NDP between routed
  8. (non-bridged) interfaces in case no delegated prefixes are available.
  9. ** Features **
  10. 1. Router Discovery support (solicitations and advertisements) with 2 modes
  11. server: RD server for slave interfaces
  12. a) automatic detection of prefixes, delegated prefix and default routes, MTU
  13. b) automatic reannouncement when changes to prefixes or routes occur
  14. relay: RD relay between master and slave interfaces
  15. a) support for rewriting announced DNS-server addresses in relay mode
  16. 2. DHCPv6-support with 2 modes of operation
  17. server: stateless, stateful and PD-server mode
  18. a) stateless and stateful address assignment
  19. b) prefix delegation support
  20. c) dynamic reconfiguration in case prefixes change
  21. d) hostname detection and hosts-file creation
  22. relay: mostly standards-compliant DHCPv6-relay
  23. a) support for rewriting announced DNS-server addresses
  24. 3. DHCPv4-support
  25. server: stateless and stateful mode
  26. 4. Proxy for Neighbor Discovery messages (solicitations and advertisements)
  27. a) support for auto-learning routes to the local routing table
  28. b) support for marking interfaces "external" not proxying NDP for them
  29. and only serving NDP for DAD and for traffic to the router itself
  30. [Warning: you should provide additional firewall rules for security]
  31. ** Compiling **
  32. odhcpd uses cmake:
  33. * To prepare a Makefile use: "cmake ."
  34. * To build / install use: "make" / "make install" afterwards.
  35. * To build DEB or RPM packages use: "make package" afterwards.
  36. ** Configuration **
  37. odhcpd uses a UCI configuration file in /etc/config/dhcp for configuration
  38. and may also receive information from ubus
  39. Section of type odhcpd
  40. Option Type Default Description
  41. legacy bool 0 Enable DHCPv4 if start but
  42. no dhcpv4 option set
  43. maindhcp bool 0 Use odhcpd as the main DHCPv4
  44. service
  45. leasefile string DHCP/v6 lease/hostfile
  46. leasetrigger string Lease trigger script
  47. loglevel integer 6 Syslog level priority (0-7)
  48. Sections of type dhcp (configure DHCP / DHCPv6 / RA / NDP service)
  49. Option Type Default Description
  50. interface string <name of UCI section> logical OpenWrt interface
  51. ifname string <resolved from logical> physical network interface
  52. networkid string same as ifname compat. alias for ifname
  53. master bool 0 is a master interface
  54. for relaying
  55. ra string disabled Router Advert service
  56. [disabled|server|relay|hybrid]
  57. dhcpv6 string disabled DHCPv6 service
  58. [disabled|server|relay|hybrid]
  59. dhcpv4 string disabled DHCPv4 service
  60. [disabled|server]
  61. ndp string disabled Neighbor Discovery Proxy
  62. [disabled|relay|hybrid]
  63. dynamicdhcp bool 1 Dynamically create leases
  64. for DHCPv4 and DHCPv6
  65. dhcpv4_forcereconf bool 0 Force reconfiguration by sending
  66. force renew message even if the client
  67. did not include the force renew nonce
  68. capability option (RFC6704)
  69. dhcpv6_assignall bool 1 Assign all viable DHCPv6 addresses
  70. in statefull mode; if disabled
  71. only the DHCPv6 address having the
  72. longest preferred lifetime is assigned
  73. dhcpv6_hostidlength integer 12 Host ID length of dynamically created leases,
  74. allowed values: 12 - 64 (bits).
  75. dhcpv6_na bool 1 DHCPv6 stateful addressing hands out IA_NA -
  76. Internet Address - Network Address
  77. dhcpv6_pd bool 1 DHCPv6 stateful addressing hands out IA_PD -
  78. Internet Address - Prefix Delegation
  79. router list <local address> Routers to announce
  80. accepts IPv4 only
  81. dns list <local address> DNS servers to announce
  82. accepts IPv4 and IPv6
  83. dns_service bool 1 Announce the address of interface as DNS service
  84. if the list of dns is empty
  85. domain list <local search domain> Search domains to announce
  86. leasetime string 12h DHCPv4 address leasetime
  87. start integer 100 DHCPv4 pool start
  88. limit integer 150 DHCPv4 pool size
  89. preferred_lifetime string 12h Value for the preferred lifetime
  90. for a prefix
  91. ra_default integer 0 Override default route
  92. 0: default, 1: ignore no public address, 2: ignore all
  93. ra_flags list other-config List of RA flags to be
  94. advertised in RA messages
  95. [managed-config other-config home-agent none]
  96. ra_slaac bool 1 Announce slaac for a prefix
  97. ra_offlink bool 0 Announce prefixes off-link
  98. ra_preference string medium Route(r) preference
  99. [medium|high|low]
  100. ra_maxinterval integer 600 Maximum time allowed between
  101. sending unsolicited RA
  102. ra_mininterval integer 200 Minimum time allowed between
  103. sending unsolicited RA
  104. ra_lifetime integer 1800 Value to be placed in Router
  105. Lifetime field of RA
  106. ra_useleasetime bool 0 Use configured leasetime as
  107. limit for the preferred and
  108. valid lifetime of a prefix
  109. ra_reachabletime integer 0 Reachable Time in milliseconds to be
  110. advertised in RA messages
  111. ra_retranstime integer 0 Retransmit Time in milliseconds to be
  112. advertised in RA messages
  113. ra_hoplimit integer 0 Current hoplimit to be advertised
  114. in RA messages
  115. ra_mtu integer - MTU to be advertised in
  116. RA messages
  117. ra_dns bool 1 Announce DNS configuration in
  118. RA messages (RFC8106)
  119. ndproxy_routing bool 1 Learn routes from NDP
  120. ndproxy_slave bool 0 NDProxy external slave
  121. prefix_filter string ::/0 Only advertise on-link prefixes within
  122. [IPv6 prefix] the provided IPv6 prefix; others are
  123. filtered out.
  124. ntp list <local address> NTP servers to announce
  125. accepts IPv4 and IPv6
  126. Sections of type host (static leases)
  127. Option Type Default Description
  128. ip string IP-Address to lease
  129. mac string MAC-address
  130. duid string DUID in base16
  131. hostid string IPv6 host identifier
  132. name string Hostname
  133. leasetime string DHCPv4/v6 leasetime