Remove email addresses from source code.

Names were not removed.
Some comments were updated.
Replace Andy's address with openssl.org

Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/4516)

Configurations/10-main.conf

@@ -208,7 +208,7 @@ sub vms_info {
         # gcc shared build with Sun C. Given that gcc generates faster
         # code [thanks to inline assembler], I would actually recommend
         # to consider using gcc shared build even with vendor compiler:-)
-        #					<appro@fy.chalmers.se>
+        #                        -- <appro@openssl.org>
         inherit_from     => [ "solaris-common", asm("x86_64_asm") ],
         cc               => "gcc",
         cflags           => add_before(picker(default => "-m64 -Wall -DL_ENDIAN",
@@ -416,7 +416,6 @@ sub vms_info {
 #   targets; b) performance-critical 32-bit assembly modules implement
 #   even PA-RISC 2.0-specific code paths, which are chosen at run-time,
 #   thus adequate performance is provided even with PA-RISC 1.1 build.
-#					<appro@fy.chalmers.se>
     "hpux-parisc-gcc" => {
         inherit_from     => [ "BASE_unix" ],
         cc               => "gcc",
@@ -456,9 +455,6 @@ sub vms_info {
     },
 
     # More attempts at unified 10.X and 11.X targets for HP C compiler.
-    #
-    # Chris Ruemmler <ruemmler@cup.hp.com>
-    # Kevin Steves <ks@hp.se>
     "hpux-parisc-cc" => {
         inherit_from     => [ "BASE_unix" ],
         cc               => "cc",
@@ -516,8 +512,6 @@ sub vms_info {
         shared_extension => ".so.\$(SHLIB_VERSION_NUMBER)",
         multilib         => "/hpux32",
     },
-    # Frank Geurts <frank.geurts@nl.abnamro.com> has patiently assisted
-    # with debugging of the following config.
     "hpux64-ia64-cc" => {
         inherit_from     => [ "BASE_unix", asm("ia64_asm") ],
         cc               => "cc",
@@ -826,8 +820,6 @@ sub vms_info {
     },
 
     #### SPARC Linux setups
-    # Ray Miller <ray.miller@computing-services.oxford.ac.uk> has
-    # patiently assisted with debugging of following two configs.
     "linux-sparcv8" => {
         inherit_from     => [ "linux-generic32", asm("sparcv8_asm") ],
         cflags           => add("-mcpu=v8 -DB_ENDIAN -DBN_DIV2W"),
@@ -1101,8 +1093,7 @@ sub vms_info {
 # and './Configure unixware-7 -Kpentium_pro' or whatever appropriate.
 # Note that not all targets include assembler support. Mostly because of
 # lack of motivation to support out-of-date platforms with out-of-date
-# compiler drivers and assemblers. Tim Rice <tim@multitalents.net> has
-# patiently assisted to debug most of it.
+# compiler drivers and assemblers.
 #
 # UnixWare 2.0x fails destest with -O.
     "unixware-2.0" => {
@@ -1149,7 +1140,7 @@ sub vms_info {
         shared_cflag     => "-fPIC",
         shared_extension => ".so.\$(SHLIB_VERSION_NUMBER)",
     },
-# SCO 5 - Ben Laurie <ben@algroup.co.uk> says the -O breaks the SCO cc.
+# SCO 5 - Ben Laurie says the -O breaks the SCO cc.
     "sco5-cc" => {
         inherit_from     => [ "BASE_unix", asm("x86_elf_asm") ],
         cc               => "cc",

apps/asn1pars.c

@@ -7,11 +7,6 @@
  * https://www.openssl.org/source/license.html
  */
 
-/*
- * A nice addition from Dr Stephen Henson <steve@openssl.org> to add the
- * -strparse option which parses nested binary structures
- */
-
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>

apps/ca.c

@@ -6,9 +6,6 @@
  * in the file LICENSE in the source distribution or at
  * https://www.openssl.org/source/license.html
  */
-
-/* The PPKI stuff has been donated by Jeff Barber <jeffb@issl.atl.hp.com> */
-
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>

apps/enc.c

@@ -450,7 +450,7 @@ int enc_main(int argc, char **argv)
             }
             /*
              * zero the complete buffer or the string passed from the command
-             * line bug picked up by Larry J. Hughes Jr. <hughes@indiana.edu>
+             * line.
              */
             if (str == strbuf)
                 OPENSSL_cleanse(str, SIZE);

crypto/aes/aes_core.c

@@ -14,9 +14,9 @@
  *
  * Optimised ANSI C code for the Rijndael cipher (now AES)
  *
- * @author Vincent Rijmen <vincent.rijmen@esat.kuleuven.ac.be>
- * @author Antoon Bosselaers <antoon.bosselaers@esat.kuleuven.ac.be>
- * @author Paulo Barreto <paulo.barreto@terra.com.br>
+ * @author Vincent Rijmen
+ * @author Antoon Bosselaers
+ * @author Paulo Barreto
  *
  * This code is hereby placed in the public domain.
  *

crypto/aes/aes_x86core.c

@@ -22,9 +22,9 @@
  *
  * Optimised ANSI C code for the Rijndael cipher (now AES)
  *
- * @author Vincent Rijmen <vincent.rijmen@esat.kuleuven.ac.be>
- * @author Antoon Bosselaers <antoon.bosselaers@esat.kuleuven.ac.be>
- * @author Paulo Barreto <paulo.barreto@terra.com.br>
+ * @author Vincent Rijmen
+ * @author Antoon Bosselaers
+ * @author Paulo Barreto
  *
  * This code is hereby placed in the public domain.
  *

crypto/aes/asm/aes-586.pl

@@ -8,7 +8,7 @@
 
 #
 # ====================================================================
-# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
 # project. The module is, however, dual licensed under OpenSSL and
 # CRYPTOGAMS licenses depending on where you obtain it. For further
 # details see http://www.openssl.org/~appro/cryptogams/.
@@ -39,7 +39,7 @@
 # for scaling too, I [try to] avoid the latter by favoring off-by-2
 # shifts and masking the result with 0xFF<<2 instead of "boring" 0xFF.
 #
-# As was shown by Dean Gaudet <dean@arctic.org>, the above note turned
+# As was shown by Dean Gaudet, the above note turned out to be
 # void. Performance improvement with off-by-2 shifts was observed on
 # intermediate implementation, which was spilling yet another register
 # to stack... Final offset*4 code below runs just a tad faster on P4,

crypto/aes/asm/aes-ia64.S

@@ -6,7 +6,7 @@
 // https://www.openssl.org/source/license.html
 //
 // ====================================================================
-// Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+// Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
 // project. Rights for redistribution and usage in source and binary
 // forms are granted according to the OpenSSL license.
 // ====================================================================
@@ -33,7 +33,7 @@
 // 64 bytes line size and L2 - 128 bytes...
 
 .ident	"aes-ia64.S, version 1.2"
-.ident	"IA-64 ISA artwork by Andy Polyakov <appro@fy.chalmers.se>"
+.ident	"IA-64 ISA artwork by Andy Polyakov <appro@openssl.org>"
 .explicit
 .text
 

crypto/aes/asm/aes-parisc.pl

@@ -8,7 +8,7 @@
 
 
 # ====================================================================
-# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
 # project. The module is, however, dual licensed under OpenSSL and
 # CRYPTOGAMS licenses depending on where you obtain it. For further
 # details see http://www.openssl.org/~appro/cryptogams/.

crypto/aes/asm/aes-ppc.pl

@@ -8,7 +8,7 @@
 
 
 # ====================================================================
-# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
 # project. The module is, however, dual licensed under OpenSSL and
 # CRYPTOGAMS licenses depending on where you obtain it. For further
 # details see http://www.openssl.org/~appro/cryptogams/.

crypto/aes/asm/aes-s390x.pl

@@ -8,7 +8,7 @@
 
 
 # ====================================================================
-# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
 # project. The module is, however, dual licensed under OpenSSL and
 # CRYPTOGAMS licenses depending on where you obtain it. For further
 # details see http://www.openssl.org/~appro/cryptogams/.

crypto/aes/asm/aes-sparcv9.pl

@@ -8,7 +8,7 @@
 
 #
 # ====================================================================
-# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
 # project. Rights for redistribution and usage in source and binary
 # forms are granted according to the OpenSSL license.
 # ====================================================================

crypto/aes/asm/aes-x86_64.pl

@@ -8,7 +8,7 @@
 
 #
 # ====================================================================
-# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
 # project. The module is, however, dual licensed under OpenSSL and
 # CRYPTOGAMS licenses depending on where you obtain it. For further
 # details see http://www.openssl.org/~appro/cryptogams/.

crypto/aes/asm/aesni-x86_64.pl

@@ -4294,10 +4294,9 @@ ${PREFIX}_set_decrypt_key:
 .size	${PREFIX}_set_decrypt_key,.-${PREFIX}_set_decrypt_key
 ___
 
-# This is based on submission by
-#
-#	Huang Ying <ying.huang@intel.com>
-#	Vinodh Gopal <vinodh.gopal@intel.com>
+# This is based on submission from Intel by
+#	Huang Ying
+#	Vinodh Gopal
 #	Kahraman Akdemir
 #
 # Aggressively optimized in respect to aeskeygenassist's critical path

crypto/aes/asm/aest4-sparcv9.pl

@@ -8,9 +8,9 @@
 
 
 # ====================================================================
-# Written by David S. Miller <davem@devemloft.net> and Andy Polyakov
-# <appro@openssl.org>. The module is licensed under 2-clause BSD
-# license. October 2012. All rights reserved.
+# Written by David S. Miller and Andy Polyakov.
+# The module is licensed under 2-clause BSD license. October 2012.
+# All rights reserved.
 # ====================================================================
 
 ######################################################################

crypto/aes/asm/bsaes-armv7.pl

@@ -14,8 +14,7 @@
 # details see http://www.openssl.org/~appro/cryptogams/.
 #
 # Specific modes and adaptation for Linux kernel by Ard Biesheuvel
-# <ard.biesheuvel@linaro.org>. Permission to use under GPL terms is
-# granted.
+# of Linaro. Permission to use under GPL terms is granted.
 # ====================================================================
 
 # Bit-sliced AES for ARM NEON
@@ -49,10 +48,7 @@
 #						<appro@openssl.org>
 
 # April-August 2013
-#
-# Add CBC, CTR and XTS subroutines, adapt for kernel use.
-#
-#					<ard.biesheuvel@linaro.org>
+# Add CBC, CTR and XTS subroutines and adapt for kernel use; courtesy of Ard.
 
 $flavour = shift;
 if ($flavour=~/\w[\w\-]*\.\w+$/) { $output=$flavour; undef $flavour; }

crypto/asn1/a_bitstr.c

@@ -141,7 +141,7 @@ ASN1_BIT_STRING *c2i_ASN1_BIT_STRING(ASN1_BIT_STRING **a,
 }
 
 /*
- * These next 2 functions from Goetz Babin-Ebell <babinebell@trustcenter.de>
+ * These next 2 functions from Goetz Babin-Ebell.
  */
 int ASN1_BIT_STRING_set_bit(ASN1_BIT_STRING *a, int n, int value)
 {

crypto/bio/bss_file.c

@@ -7,12 +7,6 @@
  * https://www.openssl.org/source/license.html
  */
 
-/*-
- * 03-Dec-1997  rdenny@dc3.com  Fix bug preventing use of stdin/stdout
- *              with binary data (e.g. asn1parse -inform DER < xxx) under
- *              Windows
- */
-
 #ifndef HEADER_BSS_FILE_C
 # define HEADER_BSS_FILE_C
 
@@ -176,7 +170,7 @@ static int file_write(BIO *b, const char *in, int inl)
             ret = inl;
         /* ret=fwrite(in,1,(int)inl,(FILE *)b->ptr); */
         /*
-         * according to Tim Hudson <tjh@cryptsoft.com>, the commented out
+         * according to Tim Hudson <tjh@openssl.org>, the commented out
          * version above can cause 'inl' write calls under some stupid stdio
          * implementations (VMS)
          */

crypto/bn/asm/alpha-mont.pl

@@ -8,7 +8,7 @@
 
 #
 # ====================================================================
-# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
 # project. The module is, however, dual licensed under OpenSSL and
 # CRYPTOGAMS licenses depending on where you obtain it. For further
 # details see http://www.openssl.org/~appro/cryptogams/.

crypto/bn/asm/ia64-mont.pl

@@ -8,7 +8,7 @@
 
 #
 # ====================================================================
-# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
 # project. The module is, however, dual licensed under OpenSSL and
 # CRYPTOGAMS licenses depending on where you obtain it. For further
 # details see http://www.openssl.org/~appro/cryptogams/.

crypto/bn/asm/ia64.S

@@ -1,7 +1,7 @@
 .explicit
 .text
 .ident	"ia64.S, Version 2.1"
-.ident	"IA-64 ISA artwork by Andy Polyakov <appro@fy.chalmers.se>"
+.ident	"IA-64 ISA artwork by Andy Polyakov <appro@openssl.org>"
 
 // Copyright 2001-2016 The OpenSSL Project Authors. All Rights Reserved.
 //
@@ -12,7 +12,7 @@
 
 //
 // ====================================================================
-// Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+// Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
 // project.
 //
 // Rights for redistribution and usage in source and binary forms are

crypto/bn/asm/mips.pl

@@ -8,7 +8,7 @@
 
 #
 # ====================================================================
-# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
 # project.
 #
 # Rights for redistribution and usage in source and binary forms are
@@ -42,7 +42,7 @@
 # Performance improvement is astonishing! 'apps/openssl speed rsa dsa'
 # goes way over 3 times faster!
 #
-#					<appro@fy.chalmers.se>
+#					<appro@openssl.org>
 
 # October 2010
 #

crypto/bn/asm/parisc-mont.pl

@@ -8,7 +8,7 @@
 
 
 # ====================================================================
-# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
 # project. The module is, however, dual licensed under OpenSSL and
 # CRYPTOGAMS licenses depending on where you obtain it. For further
 # details see http://www.openssl.org/~appro/cryptogams/.

crypto/bn/asm/ppc-mont.pl

@@ -8,7 +8,7 @@
 
 
 # ====================================================================
-# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
 # project. The module is, however, dual licensed under OpenSSL and
 # CRYPTOGAMS licenses depending on where you obtain it. For further
 # details see http://www.openssl.org/~appro/cryptogams/.

crypto/bn/asm/ppc.pl

@@ -101,10 +101,7 @@
 #dsa 2048 bits   0.0061s   0.0075s    163.5    132.8
 #
 #        Performance increase of ~60%
-#
-#	If you have comments or suggestions to improve code send
-#	me a note at schari@us.ibm.com
-#
+#        Based on submission from Suresh N. Chari of IBM
 
 $flavour = shift;
 

crypto/bn/asm/s390x-mont.pl

@@ -8,7 +8,7 @@
 
 
 # ====================================================================
-# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
 # project. The module is, however, dual licensed under OpenSSL and
 # CRYPTOGAMS licenses depending on where you obtain it. For further
 # details see http://www.openssl.org/~appro/cryptogams/.

crypto/bn/asm/sparct4-mont.pl

@@ -8,9 +8,9 @@
 
 
 # ====================================================================
-# Written by David S. Miller <davem@devemloft.net> and Andy Polyakov
-# <appro@openssl.org>. The module is licensed under 2-clause BSD
-# license. November 2012. All rights reserved.
+# Written by David S. Miller and Andy Polyakov
+# The module is licensed under 2-clause BSD license.
+# November 2012. All rights reserved.
 # ====================================================================
 
 ######################################################################

crypto/bn/asm/sparcv8.S

@@ -1,5 +1,5 @@
 .ident	"sparcv8.s, Version 1.4"
-.ident	"SPARC v8 ISA artwork by Andy Polyakov <appro@fy.chalmers.se>"
+.ident	"SPARC v8 ISA artwork by Andy Polyakov <appro@openssl.org>"
 
 /*
  * ====================================================================

crypto/bn/asm/sparcv8plus.S

@@ -1,5 +1,5 @@
 .ident	"sparcv8plus.s, Version 1.4"
-.ident	"SPARC v9 ISA artwork by Andy Polyakov <appro@fy.chalmers.se>"
+.ident	"SPARC v9 ISA artwork by Andy Polyakov <appro@openssl.org>"
 
 /*
  * ====================================================================

crypto/bn/asm/sparcv9-mont.pl

@@ -8,7 +8,7 @@
 
 
 # ====================================================================
-# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
 # project. The module is, however, dual licensed under OpenSSL and
 # CRYPTOGAMS licenses depending on where you obtain it. For further
 # details see http://www.openssl.org/~appro/cryptogams/.

crypto/bn/asm/sparcv9a-mont.pl

@@ -8,7 +8,7 @@
 
 
 # ====================================================================
-# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
 # project. The module is, however, dual licensed under OpenSSL and
 # CRYPTOGAMS licenses depending on where you obtain it. For further
 # details see http://www.openssl.org/~appro/cryptogams/.

crypto/bn/asm/via-mont.pl

@@ -8,7 +8,7 @@
 
 #
 # ====================================================================
-# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
 # project. The module is, however, dual licensed under OpenSSL and
 # CRYPTOGAMS licenses depending on where you obtain it. For further
 # details see http://www.openssl.org/~appro/cryptogams/.

crypto/bn/asm/x86-mont.pl

@@ -8,7 +8,7 @@
 
 
 # ====================================================================
-# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
 # project. The module is, however, dual licensed under OpenSSL and
 # CRYPTOGAMS licenses depending on where you obtain it. For further
 # details see http://www.openssl.org/~appro/cryptogams/.

crypto/bn/asm/x86_64-gcc.c

@@ -14,7 +14,7 @@
 /*-
  * x86_64 BIGNUM accelerator version 0.1, December 2002.
  *
- * Implemented by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+ * Implemented by Andy Polyakov <appro@openssl.org> for the OpenSSL
  * project.
  *
  * Rights for redistribution and usage in source and binary forms are

crypto/bn/bn_div.c

@@ -97,8 +97,6 @@ int BN_div(BIGNUM *dv, BIGNUM *rem, const BIGNUM *m, const BIGNUM *d,
     *   understand why...);
     * - divl doesn't only calculate quotient, but also leaves
     *   remainder in %edx which we can definitely use here:-)
-    *
-    *                                   <appro@fy.chalmers.se>
     */
 #    undef bn_div_words
 #    define bn_div_words(n0,n1,d0)                \
@@ -113,7 +111,6 @@ int BN_div(BIGNUM *dv, BIGNUM *rem, const BIGNUM *m, const BIGNUM *d,
 #   elif defined(__x86_64) && defined(SIXTY_FOUR_BIT_LONG)
    /*
     * Same story here, but it's 128-bit by 64-bit division. Wow!
-    *                                   <appro@fy.chalmers.se>
     */
 #    undef bn_div_words
 #    define bn_div_words(n0,n1,d0)                \

crypto/bn/bn_lcl.h

@@ -349,29 +349,22 @@ struct bn_gencb_st {
 # if !defined(OPENSSL_NO_ASM) && !defined(OPENSSL_NO_INLINE_ASM) && !defined(PEDANTIC)
 /*
  * BN_UMULT_HIGH section.
- *
- * No, I'm not trying to overwhelm you when stating that the
- * product of N-bit numbers is 2*N bits wide:-) No, I don't expect
- * you to be impressed when I say that if the compiler doesn't
- * support 2*N integer type, then you have to replace every N*N
- * multiplication with 4 (N/2)*(N/2) accompanied by some shifts
- * and additions which unavoidably results in severe performance
- * penalties. Of course provided that the hardware is capable of
- * producing 2*N result... That's when you normally start
- * considering assembler implementation. However! It should be
- * pointed out that some CPUs (most notably Alpha, PowerPC and
- * upcoming IA-64 family:-) provide *separate* instruction
- * calculating the upper half of the product placing the result
- * into a general purpose register. Now *if* the compiler supports
- * inline assembler, then it's not impossible to implement the
- * "bignum" routines (and have the compiler optimize 'em)
- * exhibiting "native" performance in C. That's what BN_UMULT_HIGH
- * macro is about:-)
- *
- *                                      <appro@fy.chalmers.se>
+ * If the compiler doesn't support 2*N integer type, then you have to
+ * replace every N*N multiplication with 4 (N/2)*(N/2) accompanied by some
+ * shifts and additions which unavoidably results in severe performance
+ * penalties. Of course provided that the hardware is capable of producing
+ * 2*N result... That's when you normally start considering assembler
+ * implementation. However! It should be pointed out that some CPUs (e.g.,
+ * PowerPC, Alpha, and IA-64) provide *separate* instruction calculating
+ * the upper half of the product placing the result into a general
+ * purpose register. Now *if* the compiler supports inline assembler,
+ * then it's not impossible to implement the "bignum" routines (and have
+ * the compiler optimize 'em) exhibiting "native" performance in C. That's
+ * what BN_UMULT_HIGH macro is about:-) Note that more recent compilers do
+ * support 2*64 integer type, which is also used here.
  */
 #  if defined(__SIZEOF_INT128__) && __SIZEOF_INT128__==16 && \
-      (defined(SIXRY_FOUR_BIT) || defined(SIXTY_FOUR_BIT_LONG))
+      (defined(SIXTY_FOUR_BIT) || defined(SIXTY_FOUR_BIT_LONG))
 #   define BN_UMULT_HIGH(a,b)          (((__uint128_t)(a)*(b))>>64)
 #   define BN_UMULT_LOHI(low,high,a,b) ({       \
         __uint128_t ret=(__uint128_t)(a)*(b);   \

crypto/camellia/asm/cmllt4-sparcv9.pl

@@ -8,8 +8,8 @@
 
 
 # ====================================================================
-# Written by David S. Miller <davem@devemloft.net> and Andy Polyakov
-# <appro@openssl.org>. The module is licensed under 2-clause BSD
+# Written by David S. Miller and Andy Polyakov.
+# The module is licensed under 2-clause BSD
 # license. October 2012. All rights reserved.
 # ====================================================================
 

crypto/des/asm/crypt586.pl

@@ -7,7 +7,7 @@
 # https://www.openssl.org/source/license.html
 
 # The inner loop instruction sequence and the IP/FP modifications are from
-# Svend Olaf Mikkelsen <svolaf@inet.uni-c.dk>
+# Svend Olaf Mikkelsen
 
 $0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
 push(@INC,"${dir}","${dir}../../perlasm");

crypto/des/asm/des-586.pl

@@ -7,7 +7,7 @@
 # https://www.openssl.org/source/license.html
 
 # The inner loop instruction sequence and the IP/FP modifications are from
-# Svend Olaf Mikkelsen <svolaf@inet.uni-c.dk>
+# Svend Olaf Mikkelsen.
 
 $0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
 push(@INC,"${dir}","${dir}../../perlasm");

crypto/des/asm/dest4-sparcv9.pl

@@ -8,8 +8,8 @@
 
 
 # ====================================================================
-# Written by David S. Miller <davem@devemloft.net> and Andy Polyakov
-# <appro@openssl.org>. The module is licensed under 2-clause BSD
+# Written by David S. Miller and Andy Polyakov.
+# The module is licensed under 2-clause BSD
 # license. March 2013. All rights reserved.
 # ====================================================================
 

crypto/des/cbc_cksm.c

@@ -33,7 +33,6 @@ DES_LONG DES_cbc_cksum(const unsigned char *in, DES_cblock *output,
         tin1 ^= tout1;
         tin[1] = tin1;
         DES_encrypt1((DES_LONG *)tin, schedule, DES_ENCRYPT);
-        /* fix 15/10/91 eay - thanks to keithr@sco.COM */
         tout0 = tin[0];
         tout1 = tin[1];
     }

crypto/des/des_enc.c

@@ -24,8 +24,7 @@ void DES_encrypt1(DES_LONG *data, DES_key_schedule *ks, int enc)
      * Things have been modified so that the initial rotate is done outside
      * the loop.  This required the DES_SPtrans values in sp.h to be rotated
      * 1 bit to the right. One perl script later and things have a 5% speed
-     * up on a sparc2. Thanks to Richard Outerbridge
-     * <71755.204@CompuServe.COM> for pointing this out.
+     * up on a sparc2. Thanks to Richard Outerbridge for pointing this out.
      */
     /* clear the top bits on machines with 8byte longs */
     /* shift left by 2 */
@@ -95,8 +94,7 @@ void DES_encrypt2(DES_LONG *data, DES_key_schedule *ks, int enc)
      * Things have been modified so that the initial rotate is done outside
      * the loop.  This required the DES_SPtrans values in sp.h to be rotated
      * 1 bit to the right. One perl script later and things have a 5% speed
-     * up on a sparc2. Thanks to Richard Outerbridge
-     * <71755.204@CompuServe.COM> for pointing this out.
+     * up on a sparc2. Thanks to Richard Outerbridge for pointing this out.
      */
     /* clear the top bits on machines with 8byte longs */
     r = ROTATE(r, 29) & 0xffffffffL;

crypto/des/fcrypt.c

@@ -23,7 +23,7 @@
 
 /*
  * Added more values to handle illegal salt values the way normal crypt()
- * implementations do.  The patch was sent by Bjorn Gronvall <bg@sics.se>
+ * implementations do.
  */
 static unsigned const char con_salt[128] = {
     0xD2, 0xD3, 0xD4, 0xD5, 0xD6, 0xD7, 0xD8, 0xD9,

crypto/des/qud_cksm.c

@@ -15,7 +15,6 @@
  */
 #include "des_locl.h"
 
-/* bug fix for dos - 7/6/91 - Larry hughes@logos.ucs.indiana.edu */
 #define Q_B0(a) (((DES_LONG)(a)))
 #define Q_B1(a) (((DES_LONG)(a))<<8)
 #define Q_B2(a) (((DES_LONG)(a))<<16)

crypto/des/set_key.c

@@ -18,10 +18,9 @@
 #include <openssl/crypto.h>
 #include "des_locl.h"
 
+/* defaults to false */
 OPENSSL_IMPLEMENT_GLOBAL(int, DES_check_key, 0)
-                                                    /*
-                                                     * defaults to false
-                                                     */
+
 static const unsigned char odd_parity[256] = {
     1, 1, 2, 2, 4, 4, 7, 7, 8, 8, 11, 11, 13, 13, 14, 14,
     16, 16, 19, 19, 21, 21, 22, 22, 25, 25, 26, 26, 28, 28, 31, 31,
@@ -77,8 +76,6 @@ int DES_check_key_parity(const_DES_cblock *key)
  * %T Security for Computer Networks
  * %I John Wiley & Sons
  * %D 1984
- * Many thanks to smb@ulysses.att.com (Steven Bellovin) for the reference
- * (and actual cblock values).
  */
 #define NUM_WEAK_KEY    16
 static const DES_cblock weak_keys[NUM_WEAK_KEY] = {
@@ -107,12 +104,6 @@ int DES_is_weak_key(const_DES_cblock *key)
     int i;
 
     for (i = 0; i < NUM_WEAK_KEY; i++)
-        /*
-         * Added == 0 to comparison, I obviously don't run this section very
-         * often :-(, thanks to engineering@MorningStar.Com for the fix eay
-         * 93/06/29 Another problem, I was comparing only the first 4 bytes,
-         * 97/03/18
-         */
         if (memcmp(weak_keys[i], key, sizeof(DES_cblock)) == 0)
             return 1;
     return (0);
@@ -329,8 +320,8 @@ void DES_set_key_unchecked(const_DES_cblock *key, DES_key_schedule *schedule)
     c2l(in, d);
 
     /*
-     * do PC1 in 47 simple operations :-) Thanks to John Fletcher
-     * (john_fletcher@lccmail.ocf.llnl.gov) for the inspiration. :-)
+     * do PC1 in 47 simple operations. Thanks to John Fletcher
+     * for the inspiration.
      */
     PERM_OP(d, c, t, 4, 0x0f0f0f0fL);
     HPERM_OP(c, t, -2, 0xcccc0000L);

crypto/dh/dh_gen.c

@@ -43,7 +43,7 @@ int DH_generate_parameters_ex(DH *ret, int prime_len, int generator,
  * for 3, p mod 12 == 5  <<<<< does not work for safe primes.
  * for 5, p mod 10 == 3 or 7
  *
- * Thanks to Phil Karn <karn@qualcomm.com> for the pointers about the
+ * Thanks to Phil Karn for the pointers about the
  * special generators and for answering some of my questions.
  *
  * I've implemented the second simple method :-).

crypto/dsa/dsa_lib.c

@@ -7,8 +7,6 @@
  * https://www.openssl.org/source/license.html
  */
 
-/* Original version from Steven Schoch <schoch@sheba.arc.nasa.gov> */
-
 #include <stdio.h>
 #include "internal/cryptlib.h"
 #include "internal/refcount.h"

crypto/dsa/dsa_ossl.c

@@ -7,8 +7,6 @@
  * https://www.openssl.org/source/license.html
  */
 
-/* Original version from Steven Schoch <schoch@sheba.arc.nasa.gov> */
-
 #include <stdio.h>
 #include "internal/cryptlib.h"
 #include <openssl/bn.h>

crypto/dsa/dsa_sign.c

@@ -7,8 +7,6 @@
  * https://www.openssl.org/source/license.html
  */
 
-/* Original version from Steven Schoch <schoch@sheba.arc.nasa.gov> */
-
 #include "internal/cryptlib.h"
 #include "dsa_locl.h"
 #include <openssl/bn.h>

crypto/dsa/dsa_vrf.c

@@ -7,8 +7,6 @@
  * https://www.openssl.org/source/license.html
  */
 
-/* Original version from Steven Schoch <schoch@sheba.arc.nasa.gov> */
-
 #include "internal/cryptlib.h"
 #include "dsa_locl.h"
 

crypto/ebcdic.c

@@ -14,11 +14,6 @@ NON_EMPTY_TRANSLATION_UNIT
 
 # include <openssl/ebcdic.h>
 
-/*-
- *      Initial Port for  Apache-1.3     by <Martin.Kraemer@Mch.SNI.De>
- *      Adapted for       OpenSSL-0.9.4  by <Martin.Kraemer@Mch.SNI.De>
- */
-
 # ifdef CHARSET_EBCDIC_TEST
 /*
  * Here we're looking to test the EBCDIC code on an ASCII system so we don't do

crypto/ec/ec_curve.c

@@ -2204,7 +2204,7 @@ static const struct {
 #endif
 
 /*
- * These curves were added by Annie Yousar <a.yousar@informatik.hu-berlin.de>
+ * These curves were added by Annie Yousar.
  * For the definition of RFC 5639 curves see
  * http://www.ietf.org/rfc/rfc5639.txt These curves are generated verifiable
  * at random, nevertheless the seed is omitted as parameter because the

crypto/engine/README

@@ -207,5 +207,5 @@ changes have now, as a consequence, been reverted back. This is because the
 hooking of ENGINE is now automatic (and passive, it can interally use a NULL
 ENGINE pointer to simply ignore ENGINE from then on).
 
-Hell, that should be enough for now ... comments welcome: geoff@openssl.org
+Hell, that should be enough for now ... comments welcome.
 

crypto/evp/bio_ok.c

@@ -8,7 +8,7 @@
  */
 
 /*-
-        From: Arne Ansper <arne@cyber.ee>
+        From: Arne Ansper
 
         Why BIO_f_reliable?
 

crypto/evp/p5_crpt2.c

@@ -25,8 +25,7 @@ static void h__dump(const unsigned char *p, int len);
 /*
  * This is an implementation of PKCS#5 v2.0 password based encryption key
  * derivation function PBKDF2. SHA1 version verified against test vectors
- * posted by Peter Gutmann <pgut001@cs.auckland.ac.nz> to the PKCS-TNG
- * <pkcs-tng@rsa.com> mailing list.
+ * posted by Peter Gutmann to the PKCS-TNG mailing list.
  */
 
 int PKCS5_PBKDF2_HMAC(const char *pass, int passlen,

crypto/evp/pmeth_fn.c

@@ -255,7 +255,7 @@ int EVP_PKEY_derive_set_peer(EVP_PKEY_CTX *ctx, EVP_PKEY *peer)
     }
 
     /*
-     * ran@cryptocom.ru: For clarity.  The error is if parameters in peer are
+     * For clarity.  The error is if parameters in peer are
      * present (!missing) but don't match.  EVP_PKEY_cmp_parameters may return
      * 1 (match), 0 (don't match) and -2 (comparison is not defined).  -1
      * (different key types) is impossible here because it is checked earlier.

crypto/idea/idea_lcl.h

@@ -7,11 +7,6 @@
  * https://www.openssl.org/source/license.html
  */
 
-/*
- * The new form of this macro (check if the a*b == 0) was suggested by Colin
- * Plumb <colin@nyx10.cs.du.edu>
- */
-/* Removal of the inner if from from Wei Dai 24/4/96 */
 #define idea_mul(r,a,b,ul) \
 ul=(unsigned long)a*b; \
 if (ul != 0) \
@@ -22,16 +17,6 @@ if (ul != 0) \
 else \
         r=(-(int)a-b+1);        /* assuming a or b is 0 and in range */
 
-/*
- * 7/12/95 - Many thanks to Rhys Weatherley <rweather@us.oracle.com> for
- * pointing out that I was assuming little endian byte order for all
- * quantities what idea actually used bigendian.  No where in the spec does
- * it mention this, it is all in terms of 16 bit numbers and even the example
- * does not use byte streams for the input example :-(. If you byte swap each
- * pair of input, keys and iv, the functions would produce the output as the
- * old version :-(.
- */
-
 /* NOTE - c is not incremented as per n2l */
 #define n2ln(c,l1,l2,n) { \
                         c+=n; \

crypto/include/internal/md32_common.h

@@ -61,8 +61,6 @@
  *      #define HASH_TRANSFORM          MD5_Transform
  *      #define HASH_FINAL              MD5_Final
  *      #define HASH_BLOCK_DATA_ORDER   md5_block_data_order
- *
- *                                      <appro@fy.chalmers.se>
  */
 
 #include <openssl/crypto.h>
@@ -109,7 +107,6 @@
    * Some GNU C inline assembler templates. Note that these are
    * rotates by *constant* number of bits! But that's exactly
    * what we need here...
-   *                                    <appro@fy.chalmers.se>
    */
 #  if defined(__i386) || defined(__i386__) || defined(__x86_64) || defined(__x86_64__)
 #   define ROTATE(a,n)  ({ register unsigned int ret;   \
@@ -257,10 +254,6 @@ int HASH_UPDATE(HASH_CTX *c, const void *data_, size_t len)
         return 1;
 
     l = (c->Nl + (((HASH_LONG) len) << 3)) & 0xffffffffUL;
-    /*
-     * 95-05-24 eay Fixed a bug with the overflow handling, thanks to Wei Dai
-     * <weidai@eskimo.com> for pointing it out.
-     */
     if (l < c->Nl)              /* overflow */
         c->Nh++;
     c->Nh += (HASH_LONG) (len >> 29); /* might cause compiler warning on
@@ -368,7 +361,6 @@ int HASH_FINAL(unsigned char *md, HASH_CTX *c)
  * improvement under SPARC Solaris7/64 and 5% under AlphaLinux.
  * Well, to be honest it should say that this *prevents*
  * performance degradation.
- *                              <appro@fy.chalmers.se>
  */
 # else
 /*
@@ -376,7 +368,6 @@ int HASH_FINAL(unsigned char *md, HASH_CTX *c)
  * generate better code if MD32_REG_T is defined int. The above
  * pre-processor condition reflects the circumstances under which
  * the conclusion was made and is subject to further extension.
- *                              <appro@fy.chalmers.se>
  */
 #  define MD32_REG_T int
 # endif

crypto/md4/md4_locl.h

@@ -39,9 +39,9 @@ void md4_block_data_order(MD4_CTX *c, const void *p, size_t num);
 */
 
 /*
- * As pointed out by Wei Dai <weidai@eskimo.com>, the above can be simplified
- * to the code below.  Wei attributes these optimizations to Peter Gutmann's
- * SHS code, and he attributes it to Rich Schroeppel.
+ * As pointed out by Wei Dai, the above can be simplified to the code
+ * below.  Wei attributes these optimizations to Peter Gutmann's SHS code,
+ * and he attributes it to Rich Schroeppel.
  */
 #define F(b,c,d)        ((((c) ^ (d)) & (b)) ^ (d))
 #define G(b,c,d)        (((b) & (c)) | ((b) & (d)) | ((c) & (d)))

crypto/md5/asm/md5-sparcv9.pl

@@ -13,7 +13,7 @@
 # CRYPTOGAMS licenses depending on where you obtain it. For further
 # details see http://www.openssl.org/~appro/cryptogams/.
 #
-# Hardware SPARC T4 support by David S. Miller <davem@davemloft.net>.
+# Hardware SPARC T4 support by David S. Miller.
 # ====================================================================
 
 # MD5 for SPARCv9, 6.9 cycles per byte on UltraSPARC, >40% faster than

crypto/md5/md5_locl.h

@@ -50,8 +50,8 @@ void md5_block_data_order(MD5_CTX *c, const void *p, size_t num);
 */
 
 /*
- * As pointed out by Wei Dai <weidai@eskimo.com>, the above can be simplified
- * to the code below.  Wei attributes these optimizations to Peter Gutmann's
+ * As pointed out by Wei Dai, the above can be simplified to the code
+ * below.  Wei attributes these optimizations to Peter Gutmann's
  * SHS code, and he attributes it to Rich Schroeppel.
  */
 #define F(b,c,d)        ((((c) ^ (d)) & (b)) ^ (d))

crypto/modes/asm/ghash-x86.pl

@@ -108,9 +108,8 @@
 # optimistic estimate doesn't promise 30% performance improvement,
 # there are currently no plans to increase Naggr.
 #
-# Special thanks to David Woodhouse <dwmw2@infradead.org> for
-# providing access to a Westmere-based system on behalf of Intel
-# Open Source Technology Centre.
+# Special thanks to David Woodhouse for providing access to a
+# Westmere-based system on behalf of Intel Open Source Technology Centre.
 
 # January 2010
 #

crypto/modes/asm/ghash-x86_64.pl

@@ -44,9 +44,8 @@
 # See ghash-x86.pl for background information and details about coding
 # techniques.
 #
-# Special thanks to David Woodhouse <dwmw2@infradead.org> for
-# providing access to a Westmere-based system on behalf of Intel
-# Open Source Technology Centre.
+# Special thanks to David Woodhouse for providing access to a
+# Westmere-based system on behalf of Intel Open Source Technology Centre.
 
 # December 2012
 #

crypto/modes/asm/ghashv8-armx.pl

@@ -17,14 +17,11 @@
 # GHASH for ARMv8 Crypto Extension, 64-bit polynomial multiplication.
 #
 # June 2014
-#
-# Initial version was developed in tight cooperation with Ard
-# Biesheuvel <ard.biesheuvel@linaro.org> from bits-n-pieces from
-# other assembly modules. Just like aesv8-armx.pl this module
-# supports both AArch32 and AArch64 execution modes.
+# Initial version was developed in tight cooperation with Ard Biesheuvel
+# of Linaro from bits-n-pieces from other assembly modules. Just like
+# aesv8-armx.pl this module supports both AArch32 and AArch64 execution modes.
 #
 # July 2014
-#
 # Implement 2x aggregated reduction [see ghash-x86.pl for background
 # information].
 #

crypto/rc2/rc2_ecb.c

@@ -14,7 +14,6 @@
 /*-
  * RC2 as implemented frm a posting from
  * Newsgroups: sci.crypt
- * Sender: pgut01@cs.auckland.ac.nz (Peter Gutmann)
  * Subject: Specification for Ron Rivests Cipher No.2
  * Message-ID: <4fk39f$f70@net.auckland.ac.nz>
  * Date: 11 Feb 1996 06:45:03 GMT

crypto/rc4/asm/rc4-586.pl

@@ -8,7 +8,7 @@
 
 
 # ====================================================================
-# [Re]written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+# [Re]written by Andy Polyakov <appro@openssl.org> for the OpenSSL
 # project. The module is, however, dual licensed under OpenSSL and
 # CRYPTOGAMS licenses depending on where you obtain it. For further
 # details see http://www.openssl.org/~appro/cryptogams/.
@@ -32,8 +32,6 @@
 #	performance on the same Opteron machine.
 # (**)	This number requires compressed key schedule set up by
 #	RC4_set_key [see commentary below for further details].
-#
-#					<appro@fy.chalmers.se>
 
 # May 2011
 #

crypto/rc4/asm/rc4-parisc.pl

@@ -8,7 +8,7 @@
 
 
 # ====================================================================
-# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
 # project. The module is, however, dual licensed under OpenSSL and
 # CRYPTOGAMS licenses depending on where you obtain it. For further
 # details see http://www.openssl.org/~appro/cryptogams/.

crypto/rc4/asm/rc4-s390x.pl

@@ -8,7 +8,7 @@
 
 #
 # ====================================================================
-# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
 # project. The module is, however, dual licensed under OpenSSL and
 # CRYPTOGAMS licenses depending on where you obtain it. For further
 # details see http://www.openssl.org/~appro/cryptogams/.

crypto/rc4/asm/rc4-x86_64.pl

@@ -8,7 +8,7 @@
 
 #
 # ====================================================================
-# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
 # project. The module is, however, dual licensed under OpenSSL and
 # CRYPTOGAMS licenses depending on where you obtain it. For further
 # details see http://www.openssl.org/~appro/cryptogams/.

crypto/rc4/rc4_enc.c

@@ -13,7 +13,6 @@
 /*-
  * RC4 as implemented from a posting from
  * Newsgroups: sci.crypt
- * From: sterndark@netcom.com (David Sterndark)
  * Subject: RC4 Algorithm revealed.
  * Message-ID: <sternCvKL4B.Hyy@netcom.com>
  * Date: Wed, 14 Sep 1994 06:35:31 GMT

crypto/rc4/rc4_skey.c

@@ -22,7 +22,6 @@ const char *RC4_options(void)
 /*-
  * RC4 as implemented from a posting from
  * Newsgroups: sci.crypt
- * From: sterndark@netcom.com (David Sterndark)
  * Subject: RC4 Algorithm revealed.
  * Message-ID: <sternCvKL4B.Hyy@netcom.com>
  * Date: Wed, 14 Sep 1994 06:35:31 GMT

crypto/ripemd/asm/rmd-586.pl

@@ -339,7 +339,6 @@ sub ripemd160_block
 			  # aligned. The good news are that gcc-2.95
 			  # and later does keep first argument at
 			  # least double-wise aligned.
-			  #			<appro@fy.chalmers.se>
 
 	&set_label("start") unless $normal;
 	&comment("");

crypto/ripemd/rmd_locl.h

@@ -15,7 +15,6 @@
 /*
  * DO EXAMINE COMMENTS IN crypto/md5/md5_locl.h & crypto/md5/md5_dgst.c
  * FOR EXPLANATIONS ON FOLLOWING "CODE."
- *                                      <appro@fy.chalmers.se>
  */
 #ifdef RMD160_ASM
 # if defined(__i386) || defined(__i386__) || defined(_M_IX86)
@@ -46,7 +45,7 @@ void ripemd160_block_data_order(RIPEMD160_CTX *c, const void *p, size_t num);
 #include "internal/md32_common.h"
 
 /*
- * Transformed F2 and F4 are courtesy of Wei Dai <weidai@eskimo.com>
+ * Transformed F2 and F4 are courtesy of Wei Dai
  */
 #define F1(x,y,z)       ((x) ^ (y) ^ (z))
 #define F2(x,y,z)       ((((y) ^ (z)) & (x)) ^ (z))

crypto/sha/asm/sha1-586.pl

@@ -38,7 +38,6 @@
 # improvement on P4 outweights the loss and incorporate this
 # re-tuned code to 0.9.7 and later.
 # ----------------------------------------------------------------
-#					<appro@fy.chalmers.se>
 
 # August 2009.
 #

crypto/sha/asm/sha1-alpha.pl

@@ -8,7 +8,7 @@
 
 
 # ====================================================================
-# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
 # project. The module is, however, dual licensed under OpenSSL and
 # CRYPTOGAMS licenses depending on where you obtain it. For further
 # details see http://www.openssl.org/~appro/cryptogams/.

crypto/sha/asm/sha1-ia64.pl

@@ -8,7 +8,7 @@
 
 #
 # ====================================================================
-# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
 # project. The module is, however, dual licensed under OpenSSL and
 # CRYPTOGAMS licenses depending on where you obtain it. For further
 # details see http://www.openssl.org/~appro/cryptogams/.

crypto/sha/asm/sha1-mips.pl

@@ -8,7 +8,7 @@
 
 
 # ====================================================================
-# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
 # project. The module is, however, dual licensed under OpenSSL and
 # CRYPTOGAMS licenses depending on where you obtain it. For further
 # details see http://www.openssl.org/~appro/cryptogams/.

crypto/sha/asm/sha1-parisc.pl

@@ -8,7 +8,7 @@
 
 
 # ====================================================================
-# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
 # project. The module is, however, dual licensed under OpenSSL and
 # CRYPTOGAMS licenses depending on where you obtain it. For further
 # details see http://www.openssl.org/~appro/cryptogams/.

crypto/sha/asm/sha1-ppc.pl

@@ -8,7 +8,7 @@
 
 
 # ====================================================================
-# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
 # project. The module is, however, dual licensed under OpenSSL and
 # CRYPTOGAMS licenses depending on where you obtain it. For further
 # details see http://www.openssl.org/~appro/cryptogams/.

crypto/sha/asm/sha1-s390x.pl

@@ -8,7 +8,7 @@
 
 
 # ====================================================================
-# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
 # project. The module is, however, dual licensed under OpenSSL and
 # CRYPTOGAMS licenses depending on where you obtain it. For further
 # details see http://www.openssl.org/~appro/cryptogams/.

crypto/sha/asm/sha1-sparcv9.pl

@@ -8,12 +8,12 @@
 
 
 # ====================================================================
-# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
 # project. The module is, however, dual licensed under OpenSSL and
 # CRYPTOGAMS licenses depending on where you obtain it. For further
 # details see http://www.openssl.org/~appro/cryptogams/.
 #
-# Hardware SPARC T4 support by David S. Miller <davem@davemloft.net>.
+# Hardware SPARC T4 support by David S. Miller
 # ====================================================================
 
 # Performance improvement is not really impressive on pre-T1 CPU: +8%

crypto/sha/asm/sha1-sparcv9a.pl

@@ -8,7 +8,7 @@
 
 
 # ====================================================================
-# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
 # project. The module is, however, dual licensed under OpenSSL and
 # CRYPTOGAMS licenses depending on where you obtain it. For further
 # details see http://www.openssl.org/~appro/cryptogams/.

crypto/sha/asm/sha1-thumb.pl

@@ -8,7 +8,7 @@
 
 
 # ====================================================================
-# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
 # project. The module is, however, dual licensed under OpenSSL and
 # CRYPTOGAMS licenses depending on where you obtain it. For further
 # details see http://www.openssl.org/~appro/cryptogams/.

crypto/sha/asm/sha512-parisc.pl

@@ -8,7 +8,7 @@
 
 
 # ====================================================================
-# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
 # project. The module is, however, dual licensed under OpenSSL and
 # CRYPTOGAMS licenses depending on where you obtain it. For further
 # details see http://www.openssl.org/~appro/cryptogams/.

crypto/sha/asm/sha512-s390x.pl

@@ -8,7 +8,7 @@
 
 
 # ====================================================================
-# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
 # project. The module is, however, dual licensed under OpenSSL and
 # CRYPTOGAMS licenses depending on where you obtain it. For further
 # details see http://www.openssl.org/~appro/cryptogams/.

crypto/sha/asm/sha512-sparcv9.pl

@@ -8,12 +8,12 @@
 
 
 # ====================================================================
-# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
 # project. The module is, however, dual licensed under OpenSSL and
 # CRYPTOGAMS licenses depending on where you obtain it. For further
 # details see http://www.openssl.org/~appro/cryptogams/.
 #
-# Hardware SPARC T4 support by David S. Miller <davem@davemloft.net>.
+# Hardware SPARC T4 support by David S. Miller
 # ====================================================================
 
 # SHA256 performance improvement over compiler generated code varies

crypto/sha/sha512.c

@@ -41,7 +41,6 @@
  * As this implementation relies on 64-bit integer type, it's totally
  * inappropriate for platforms which don't support it, most notably
  * 16-bit platforms.
- *                                      <appro@fy.chalmers.se>
  */
 #include <stdlib.h>
 #include <string.h>

crypto/sha/sha_locl.h

@@ -67,11 +67,12 @@ int HASH_INIT(SHA_CTX *c)
 #define K_60_79 0xca62c1d6UL
 
 /*
- * As pointed out by Wei Dai <weidai@eskimo.com>, F() below can be simplified
- * to the code in F_00_19.  Wei attributes these optimisations to Peter
- * Gutmann's SHS code, and he attributes it to Rich Schroeppel. #define
- * F(x,y,z) (((x) & (y)) | ((~(x)) & (z))) I've just become aware of another
- * tweak to be made, again from Wei Dai, in F_40_59, (x&a)|(y&a) -> (x|y)&a
+ * As pointed out by Wei Dai, F() below can be simplified to the code in
+ * F_00_19.  Wei attributes these optimisations to Peter Gutmann's SHS code,
+ * and he attributes it to Rich Schroeppel.
+ *      #define F(x,y,z) (((x) & (y)) | ((~(x)) & (z)))
+ * I've just become aware of another tweak to be made, again from Wei Dai,
+ * in F_40_59, (x&a)|(y&a) -> (x|y)&a
  */
 #define F_00_19(b,c,d)  ((((c) ^ (d)) & (b)) ^ (d))
 #define F_20_39(b,c,d)  ((b) ^ (c) ^ (d))
@@ -120,7 +121,6 @@ int HASH_INIT(SHA_CTX *c)
    * "find" this expectation reasonable:-( On order to make such
    * compilers generate better code I replace X[] with a bunch of
    * X0, X1, etc. See the function body below...
-   *                                    <appro@fy.chalmers.se>
    */
 #  define X(i)   XX##i
 # else

crypto/siphash/siphash.c

@@ -12,16 +12,14 @@
    SipHash reference C implementation
 
    Copyright (c) 2012-2016 Jean-Philippe Aumasson
-   <jeanphilippe.aumasson@gmail.com>
-   Copyright (c) 2012-2014 Daniel J. Bernstein <djb@cr.yp.to>
+   Copyright (c) 2012-2014 Daniel J. Bernstein
 
    To the extent possible under law, the author(s) have dedicated all copyright
    and related and neighboring rights to this software to the public domain
    worldwide. This software is distributed without any warranty.
 
    You should have received a copy of the CC0 Public Domain Dedication along
-   with
-   this software. If not, see
+   with this software. If not, see
    <http://creativecommons.org/publicdomain/zero/1.0/>.
  */
 

crypto/ui/ui_openssl.c

@@ -409,8 +409,8 @@ static int open_console(UI *ui)
 #  endif
 #  ifdef EINVAL
             /*
-             * Ariel Glenn ariel@columbia.edu reports that solaris can return
-             * EINVAL instead.  This should be ok
+             * Ariel Glenn reports that solaris can return EINVAL instead.
+             * This should be ok
              */
         if (errno == EINVAL)
             is_a_tty = 0;

crypto/whrlpool/asm/wp-mmx.pl

@@ -8,7 +8,7 @@
 
 #
 # ====================================================================
-# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
 # project. Rights for redistribution and usage in source and binary
 # forms are granted according to the OpenSSL license.
 # ====================================================================

crypto/whrlpool/asm/wp-x86_64.pl

@@ -8,7 +8,7 @@
 
 #
 # ====================================================================
-# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
 # project. Rights for redistribution and usage in source and binary
 # forms are granted according to the OpenSSL license.
 # ====================================================================

crypto/whrlpool/wp_block.c

@@ -10,14 +10,6 @@
 /**
  * The Whirlpool hashing function.
  *
- * <P>
- * <b>References</b>
- *
- * <P>
- * The Whirlpool algorithm was developed by
- * <a href="mailto:pbarreto@scopus.com.br">Paulo S. L. M. Barreto</a> and
- * <a href="mailto:vincent.rijmen@cryptomathic.com">Vincent Rijmen</a>.
- *
  * See
  *      P.S.L.M. Barreto, V. Rijmen,
  *      ``The Whirlpool hashing function,''

crypto/whrlpool/wp_dgst.c

@@ -10,14 +10,6 @@
 /**
  * The Whirlpool hashing function.
  *
- * <P>
- * <b>References</b>
- *
- * <P>
- * The Whirlpool algorithm was developed by
- * <a href="mailto:pbarreto@scopus.com.br">Paulo S. L. M. Barreto</a> and
- * <a href="mailto:vincent.rijmen@cryptomathic.com">Vincent Rijmen</a>.
- *
  * See
  *      P.S.L.M. Barreto, V. Rijmen,
  *      ``The Whirlpool hashing function,''

include/openssl/dsa.h

@@ -7,11 +7,6 @@
  * https://www.openssl.org/source/license.html
  */
 
-/*
- * The DSS routines are based on patches supplied by
- * Steven Schoch <schoch@sheba.arc.nasa.gov>.
- */
-
 #ifndef HEADER_DSA_H
 # define HEADER_DSA_H
 

include/openssl/x509.h

@@ -254,9 +254,8 @@ typedef struct X509_info_st {
 DEFINE_STACK_OF(X509_INFO)
 
 /*
- * The next 2 structures and their 8 routines were sent to me by Pat Richard
- * <patr@x509.com> and are used to manipulate Netscapes spki structures -
- * useful if you are writing a CA web page
+ * The next 2 structures and their 8 routines are used to manipulate Netscape's
+ * spki structures - useful if you are writing a CA web page
  */
 typedef struct Netscape_spkac_st {
     X509_PUBKEY *pubkey;

util/perl/OpenSSL/Test.pm

@@ -1146,7 +1146,7 @@ L<Test::More>, L<Test::Harness>
 
 =head1 AUTHORS
 
-Richard Levitte E<lt>levitte@openssl.orgE<gt> with assitance and
+Richard Levitte E<lt>levitte@openssl.orgE<gt> with assistance and
 inspiration from Andy Polyakov E<lt>appro@openssl.org<gt>.
 
 =cut