=pod =head1 NAME provider-base - The basic OpenSSL library E-E provider functions =head1 SYNOPSIS #include /* * None of these are actual functions, but are displayed like this for * the function signatures for functions that are offered as function * pointers in OSSL_DISPATCH arrays. */ /* Functions offered by libcrypto to the providers */ const OSSL_ITEM *core_gettable_params(const OSSL_CORE_HANDLE *handle); int core_get_params(const OSSL_CORE_HANDLE *handle, OSSL_PARAM params[]); typedef void (*OSSL_thread_stop_handler_fn)(void *arg); int core_thread_start(const OSSL_CORE_HANDLE *handle, OSSL_thread_stop_handler_fn handfn, void *arg); OPENSSL_CORE_CTX *core_get_libctx(const OSSL_CORE_HANDLE *handle); void core_new_error(const OSSL_CORE_HANDLE *handle); void core_set_error_debug(const OSSL_CORE_HANDLE *handle, const char *file, int line, const char *func); void core_vset_error(const OSSL_CORE_HANDLE *handle, uint32_t reason, const char *fmt, va_list args); /* * Some OpenSSL functionality is directly offered to providers via * dispatch */ void *CRYPTO_malloc(size_t num, const char *file, int line); void *CRYPTO_zalloc(size_t num, const char *file, int line); void *CRYPTO_memdup(const void *str, size_t siz, const char *file, int line); char *CRYPTO_strdup(const char *str, const char *file, int line); char *CRYPTO_strndup(const char *str, size_t s, const char *file, int line); void CRYPTO_free(void *ptr, const char *file, int line); void CRYPTO_clear_free(void *ptr, size_t num, const char *file, int line); void *CRYPTO_realloc(void *addr, size_t num, const char *file, int line); void *CRYPTO_clear_realloc(void *addr, size_t old_num, size_t num, const char *file, int line); void *CRYPTO_secure_malloc(size_t num, const char *file, int line); void *CRYPTO_secure_zalloc(size_t num, const char *file, int line); void CRYPTO_secure_free(void *ptr, const char *file, int line); void CRYPTO_secure_clear_free(void *ptr, size_t num, const char *file, int line); int CRYPTO_secure_allocated(const void *ptr); void OPENSSL_cleanse(void *ptr, size_t len); unsigned char *OPENSSL_hexstr2buf(const char *str, long *buflen); OSSL_CORE_BIO *BIO_new_file(const char *filename, const char *mode); OSSL_CORE_BIO *BIO_new_membuf(const void *buf, int len); int BIO_read_ex(OSSL_CORE_BIO *bio, void *data, size_t data_len, size_t *bytes_read); int BIO_write_ex(OSSL_CORE_BIO *bio, const void *data, size_t data_len, size_t *written); int BIO_up_ref(OSSL_CORE_BIO *bio); int BIO_free(OSSL_CORE_BIO *bio); int BIO_vprintf(OSSL_CORE_BIO *bio, const char *format, va_list args); int BIO_vsnprintf(char *buf, size_t n, const char *fmt, va_list args); void OSSL_SELF_TEST_set_callback(OSSL_LIB_CTX *libctx, OSSL_CALLBACK *cb, void *cbarg); size_t get_entropy(const OSSL_CORE_HANDLE *handle, unsigned char **pout, int entropy, size_t min_len, size_t max_len); void cleanup_entropy(const OSSL_CORE_HANDLE *handle, unsigned char *buf, size_t len); size_t get_nonce(const OSSL_CORE_HANDLE *handle, unsigned char **pout, size_t min_len, size_t max_len, const void *salt, size_t salt_len); void cleanup_nonce(const OSSL_CORE_HANDLE *handle, unsigned char *buf, size_t len); /* Functions for querying the providers in the application library context */ int provider_register_child_cb(const OSSL_CORE_HANDLE *handle, int (*create_cb)(const OSSL_CORE_HANDLE *provider, void *cbdata), int (*remove_cb)(const OSSL_CORE_HANDLE *provider, void *cbdata), int (*global_props_cb)(const char *props, void *cbdata), void *cbdata); void provider_deregister_child_cb(const OSSL_CORE_HANDLE *handle); const char *provider_name(const OSSL_CORE_HANDLE *prov); void *provider_get0_provider_ctx(const OSSL_CORE_HANDLE *prov); const OSSL_DISPATCH *provider_get0_dispatch(const OSSL_CORE_HANDLE *prov); int provider_up_ref(const OSSL_CORE_HANDLE *prov, int activate); int provider_free(const OSSL_CORE_HANDLE *prov, int deactivate); /* Functions offered by the provider to libcrypto */ void provider_teardown(void *provctx); const OSSL_ITEM *provider_gettable_params(void *provctx); int provider_get_params(void *provctx, OSSL_PARAM params[]); const OSSL_ALGORITHM *provider_query_operation(void *provctx, int operation_id, const int *no_store); void provider_unquery_operation(void *provctx, int operation_id, const OSSL_ALGORITHM *algs); const OSSL_ITEM *provider_get_reason_strings(void *provctx); int provider_get_capabilities(void *provctx, const char *capability, OSSL_CALLBACK *cb, void *arg); int provider_self_test(void *provctx); =head1 DESCRIPTION All "functions" mentioned here are passed as function pointers between F and the provider in B arrays, in the call of the provider initialization function. See L for a description of the initialization function. All these "functions" have a corresponding function type definition named B, and a helper function to retrieve the function pointer from a B element named B. For example, the "function" core_gettable_params() has these: typedef OSSL_PARAM * (OSSL_FUNC_core_gettable_params_fn)(const OSSL_CORE_HANDLE *handle); static ossl_inline OSSL_NAME_core_gettable_params_fn OSSL_FUNC_core_gettable_params(const OSSL_DISPATCH *opf); B arrays are indexed by numbers that are provided as macros in L, as follows: For I (the B array passed from F to the provider): core_gettable_params OSSL_FUNC_CORE_GETTABLE_PARAMS core_get_params OSSL_FUNC_CORE_GET_PARAMS core_thread_start OSSL_FUNC_CORE_THREAD_START core_get_libctx OSSL_FUNC_CORE_GET_LIBCTX core_new_error OSSL_FUNC_CORE_NEW_ERROR core_set_error_debug OSSL_FUNC_CORE_SET_ERROR_DEBUG core_vset_error OSSL_FUNC_CORE_VSET_ERROR CRYPTO_malloc OSSL_FUNC_CRYPTO_MALLOC CRYPTO_zalloc OSSL_FUNC_CRYPTO_ZALLOC CRYPTO_memdup OSSL_FUNC_CRYPTO_MEMDUP CRYPTO_strdup OSSL_FUNC_CRYPTO_STRDUP CRYPTO_strndup OSSL_FUNC_CRYPTO_STRNDUP CRYPTO_free OSSL_FUNC_CRYPTO_FREE CRYPTO_clear_free OSSL_FUNC_CRYPTO_CLEAR_FREE CRYPTO_realloc OSSL_FUNC_CRYPTO_REALLOC CRYPTO_clear_realloc OSSL_FUNC_CRYPTO_CLEAR_REALLOC CRYPTO_secure_malloc OSSL_FUNC_CRYPTO_SECURE_MALLOC CRYPTO_secure_zalloc OSSL_FUNC_CRYPTO_SECURE_ZALLOC CRYPTO_secure_free OSSL_FUNC_CRYPTO_SECURE_FREE CRYPTO_secure_clear_free OSSL_FUNC_CRYPTO_SECURE_CLEAR_FREE CRYPTO_secure_allocated OSSL_FUNC_CRYPTO_SECURE_ALLOCATED BIO_new_file OSSL_FUNC_BIO_NEW_FILE BIO_new_mem_buf OSSL_FUNC_BIO_NEW_MEMBUF BIO_read_ex OSSL_FUNC_BIO_READ_EX BIO_up_ref OSSL_FUNC_BIO_UP_REF BIO_free OSSL_FUNC_BIO_FREE BIO_vprintf OSSL_FUNC_BIO_VPRINTF OPENSSL_cleanse OSSL_FUNC_OPENSSL_CLEANSE OSSL_SELF_TEST_set_callback OSSL_FUNC_SELF_TEST_CB ossl_rand_get_entropy OSSL_FUNC_GET_ENTROPY ossl_rand_cleanup_entropy OSSL_FUNC_CLEANUP_ENTROPY ossl_rand_get_nonce OSSL_FUNC_GET_NONCE ossl_rand_cleanup_nonce OSSL_FUNC_CLEANUP_NONCE For I<*out> (the B array passed from the provider to F): provider_teardown OSSL_FUNC_PROVIDER_TEARDOWN provider_gettable_params OSSL_FUNC_PROVIDER_GETTABLE_PARAMS provider_get_params OSSL_FUNC_PROVIDER_GET_PARAMS provider_query_operation OSSL_FUNC_PROVIDER_QUERY_OPERATION provider_unquery_operation OSSL_FUNC_PROVIDER_UNQUERY_OPERATION provider_get_reason_strings OSSL_FUNC_PROVIDER_GET_REASON_STRINGS provider_get_capabilities OSSL_FUNC_PROVIDER_GET_CAPABILITIES provider_self_test OSSL_FUNC_PROVIDER_SELF_TEST =head2 Core functions core_gettable_params() returns a constant array of descriptor B, for parameters that core_get_params() can handle. core_get_params() retrieves parameters from the core for the given I. See L below for a description of currently known parameters. The core_thread_start() function informs the core that the provider has stated an interest in the current thread. The core will inform the provider when the thread eventually stops. It must be passed the I for this provider, as well as a callback I which will be called when the thread stops. The callback will subsequently be called, with the supplied argument I, from the thread that is stopping and gets passed the provider context as an argument. This may be useful to perform thread specific clean up such as freeing thread local variables. core_get_libctx() retrieves the library context in which the library object for the current provider is stored, accessible through the I. This may sometimes be useful if the provider wishes to store a reference to its context in the same library context. core_new_error(), core_set_error_debug() and core_vset_error() are building blocks for reporting an error back to the core, with reference to the I. =over 4 =item core_new_error() allocates a new thread specific error record. This corresponds to the OpenSSL function L. =item core_set_error_debug() sets debugging information in the current thread specific error record. The debugging information includes the name of the file I, the line I and the function name I where the error occurred. This corresponds to the OpenSSL function L. =item core_vset_error() sets the I for the error, along with any addition data. The I is a number defined by the provider and used to index the reason strings table that's returned by provider_get_reason_strings(). The additional data is given as a format string I and a set of arguments I, which are treated in the same manner as with BIO_vsnprintf(). I and I may also be passed to indicate exactly where the error occurred or was reported. This corresponds to the OpenSSL function L. =back CRYPTO_malloc(), CRYPTO_zalloc(), CRYPTO_memdup(), CRYPTO_strdup(), CRYPTO_strndup(), CRYPTO_free(), CRYPTO_clear_free(), CRYPTO_realloc(), CRYPTO_clear_realloc(), CRYPTO_secure_malloc(), CRYPTO_secure_zalloc(), CRYPTO_secure_free(), CRYPTO_secure_clear_free(), CRYPTO_secure_allocated(), BIO_new_file(), BIO_new_mem_buf(), BIO_read_ex(), BIO_write_ex(), BIO_up_ref(), BIO_free(), BIO_vprintf(), BIO_vsnprintf(), OPENSSL_cleanse() and OPENSSL_hexstr2buf() correspond exactly to the public functions with the same name. As a matter of fact, the pointers in the B array are direct pointers to those public functions. Note that the BIO functions take an B type rather than the standard B type. This is to ensure that a provider does not mix BIOs from the core with BIOs used on the provider side (the two are not compatible). OSSL_SELF_TEST_set_callback() is used to set an optional callback that can be passed into a provider. This may be ignored by a provider. get_entropy() retrieves seeding material from the operating system. The seeding material will have at least I bytes of randomness and the output will have at least I and at most I bytes. The buffer address is stored in I<*pout> and the buffer length is returned to the caller. On error, zero is returned. cleanup_entropy() is used to clean up and free the buffer returned by get_entropy(). The entropy pointer returned by get_entropy() is passed in B and its length in B. get_nonce() retrieves a nonce using the passed I parameter of length I and operating system specific information. The I should contain uniquely identifying information and this is included, in an unspecified manner, as part of the output. The output is stored in a buffer which contrains at least I and at most I bytes. The buffer address is stored in I<*pout> and the buffer length returned to the caller. On error, zero is returned. cleanup_nonce() is used to clean up and free the buffer returned by get_nonce(). The nonce pointer returned by get_nonce() is passed in B and its length in B. provider_register_child_cb() registers callbacks for being informed about the loading and unloading of providers in the application's library context. I is this provider's handle and I is this provider's data that will be passed back to the callbacks. It returns 1 on success or 0 otherwise. I is a callback that will be called when a new provider is loaded into the application's library context. It is also called for any providers that are already loaded at the point that this callback is registered. The callback is passed the handle being used for the new provider being loadded and this provider's data in I. It should return 1 on success or 0 on failure. I is a callback that will be called when a new provider is unloaded from the application's library context. It is passed the handle being used for the provider being unloaded and this provider's data in I. It should return 1 on success or 0 on failure. I is a callback that will be called when the global properties from the parent library context are changed. It should return 1 on success or 0 on failure. provider_deregister_child_cb() unregisters callbacks previously registered via provider_register_child_cb(). If provider_register_child_cb() has been called then provider_deregister_child_cb() should be called at or before the point that this provider's teardown function is called. provider_name() returns a string giving the name of the provider identified by I. provider_get0_provider_ctx() returns the provider context that is associated with the provider identified by I. provider_get0_dispatch() gets the dispatch table registered by the provider identified by I when it initialised. provider_up_ref() increments the reference count on the provider I. If I is nonzero then the provider is also loaded if it is not already loaded. It returns 1 on success or 0 on failure. provider_free() decrements the reference count on the provider I. If I is nonzero then the provider is also unloaded if it is not already loaded. It returns 1 on success or 0 on failure. =head2 Provider functions provider_teardown() is called when a provider is shut down and removed from the core's provider store. It must free the passed I. provider_gettable_params() should return a constant array of descriptor B, for parameters that provider_get_params() can handle. provider_get_params() should process the B array I, setting the values of the parameters it understands. provider_query_operation() should return a constant B that corresponds to the given I. It should indicate if the core may store a reference to this array by setting I<*no_store> to 0 (core may store a reference) or 1 (core may not store a reference). provider_unquery_operation() informs the provider that the result of a provider_query_operation() is no longer directly required and that the function pointers have been copied. The I should match that passed to provider_query_operation() and I should be its return value. provider_get_reason_strings() should return a constant B array that provides reason strings for reason codes the provider may use when reporting errors using core_put_error(). The provider_get_capabilities() function should call the callback I passing it a set of Bs and the caller supplied argument I. The Bs should provide details about the capability with the name given in the I argument relevant for the provider context I. If a provider supports multiple capabilities with the given name then it may call the callback multiple times (one for each capability). Capabilities can be useful for describing the services that a provider can offer. For further details see the L section below. It should return 1 on success or 0 on error. The provider_self_test() function should perform known answer tests on a subset of the algorithms that it uses, and may also verify the integrity of the provider module. It should return 1 on success or 0 on error. It will return 1 if this function is not used. None of these functions are mandatory, but a provider is fairly useless without at least provider_query_operation(), and provider_gettable_params() is fairly useless if not accompanied by provider_get_params(). =head2 Provider parameters provider_get_params() can return the following provider parameters to the core: =over 4 =item "name" (B) This points to a string that should give a unique name for the provider. =item "version" (B) This points to a string that is a version number associated with this provider. OpenSSL in-built providers use OPENSSL_VERSION_STR, but this may be different for any third party provider. This string is for informational purposes only. =item "buildinfo" (B) This points to a string that is a build information associated with this provider. OpenSSL in-built providers use OPENSSL_FULL_VERSION_STR, but this may be different for any third party provider. =item "status" (B) This returns 0 if the provider has entered an error state, otherwise it returns 1. =back provider_gettable_params() should return the above parameters. =head2 Core parameters core_get_params() can retrieve the following core parameters for each provider: =over 4 =item "openssl-version" (B) This points to the OpenSSL libraries' full version string, i.e. the string expanded from the macro B. =item "provider-name" (B) This points to the OpenSSL libraries' idea of what the calling provider is named. =item "module-filename" (B) This points to a string containing the full filename of the providers module file. =back Additionally, provider specific configuration parameters from the config file are available, in dotted name form. The dotted name form is a concatenation of section names and final config command name separated by periods. For example, let's say we have the following config example: openssl_conf = openssl_init [openssl_init] providers = providers_sect [providers_sect] foo = foo_sect [foo_sect] activate = 1 data1 = 2 data2 = str more = foo_more [foo_more] data3 = foo,bar The provider will have these additional parameters available: =over 4 =item "activate" pointing at the string "1" =item "data1" pointing at the string "2" =item "data2" pointing at the string "str" =item "more.data3" pointing at the string "foo,bar" =back For more information on handling parameters, see L as L. =head1 CAPABILITIES Capabilities describe some of the services that a provider can offer. Applications can query the capabilities to discover those services. =head3 "TLS-GROUP" Capability The "TLS-GROUP" capability can be queried by libssl to discover the list of TLS groups that a provider can support. Each group supported can be used for I (KEX) or I (KEM) during a TLS handshake. TLS clients can advertise the list of TLS groups they support in the supported_groups extension, and TLS servers can select a group from the offered list that they also support. In this way a provider can add to the list of groups that libssl already supports with additional ones. Each TLS group that a provider supports should be described via the callback passed in through the provider_get_capabilities function. Each group should have the following details supplied (all are mandatory, except B): =over 4 =item "tls-group-name" (B) The name of the group as given in the IANA TLS Supported Groups registry L. =item "tls-group-name-internal" (B) The name of the group as known by the provider. This could be the same as the "tls-group-name", but does not have to be. =item "tls-group-id" (B) The TLS group id value as given in the IANA TLS Supported Groups registry. =item "tls-group-alg" (B) The name of a Key Management algorithm that the provider offers and that should be used with this group. Keys created should be able to support I or I (KEM), as implied by the optional B flag. The algorithm must support key and parameter generation as well as the key/parameter generation parameter, B. The group name given via "tls-group-name-internal" above will be passed via B when libssl wishes to generate keys/parameters. =item "tls-group-sec-bits" (B) The number of bits of security offered by keys in this group. The number of bits should be comparable with the ones given in table 2 and 3 of the NIST SP800-57 document. =item "tls-group-is-kem" (B) Boolean flag to describe if the group should be used in I (KEX) mode (0, default) or in I (KEM) mode (1). This parameter is optional: if not specified, KEX mode is assumed as the default mode for the group. In KEX mode, in a typical Diffie-Hellman fashion, both sides execute I then I against the peer public key. To operate in KEX mode, the group implementation must support the provider functions as described in L. In KEM mode, the client executes I and sends its public key, the server executes I using the client's public key and sends back the resulting I, finally the client executes I to retrieve the same I generated by the server's I. To operate in KEM mode, the group implementation must support the provider functions as described in L. Both in KEX and KEM mode, the resulting I is then used according to the protocol specification. =item "tls-min-tls" (B) =item "tls-max-tls" (B) =item "tls-min-dtls" (B) =item "tls-max-dtls" (B) These parameters can be used to describe the minimum and maximum TLS and DTLS versions supported by the group. The values equate to the on-the-wire encoding of the various TLS versions. For example TLSv1.3 is 0x0304 (772 decimal), and TLSv1.2 is 0x0303 (771 decimal). A 0 indicates that there is no defined minimum or maximum. A -1 indicates that the group should not be used in that protocol. =back =head1 EXAMPLES This is an example of a simple provider made available as a dynamically loadable module. It implements the fictitious algorithm C for the fictitious operation C. #include #include #include /* Errors used in this provider */ #define E_MALLOC 1 static const OSSL_ITEM reasons[] = { { E_MALLOC, "memory allocation failure" }. { 0, NULL } /* Termination */ }; /* * To ensure we get the function signature right, forward declare * them using function types provided by openssl/core_dispatch.h */ OSSL_FUNC_bar_newctx_fn foo_newctx; OSSL_FUNC_bar_freectx_fn foo_freectx; OSSL_FUNC_bar_init_fn foo_init; OSSL_FUNC_bar_update_fn foo_update; OSSL_FUNC_bar_final_fn foo_final; OSSL_FUNC_provider_query_operation_fn p_query; OSSL_FUNC_provider_get_reason_strings_fn p_reasons; OSSL_FUNC_provider_teardown_fn p_teardown; OSSL_provider_init_fn OSSL_provider_init; OSSL_FUNC_core_put_error *c_put_error = NULL; /* Provider context */ struct prov_ctx_st { OSSL_CORE_HANDLE *handle; } /* operation context for the algorithm FOO */ struct foo_ctx_st { struct prov_ctx_st *provctx; int b; }; static void *foo_newctx(void *provctx) { struct foo_ctx_st *fooctx = malloc(sizeof(*fooctx)); if (fooctx != NULL) fooctx->provctx = provctx; else c_put_error(provctx->handle, E_MALLOC, __FILE__, __LINE__); return fooctx; } static void foo_freectx(void *fooctx) { free(fooctx); } static int foo_init(void *vfooctx) { struct foo_ctx_st *fooctx = vfooctx; fooctx->b = 0x33; } static int foo_update(void *vfooctx, unsigned char *in, size_t inl) { struct foo_ctx_st *fooctx = vfooctx; /* did you expect something serious? */ if (inl == 0) return 1; for (; inl-- > 0; in++) *in ^= fooctx->b; return 1; } static int foo_final(void *vfooctx) { struct foo_ctx_st *fooctx = vfooctx; fooctx->b = 0x66; } static const OSSL_DISPATCH foo_fns[] = { { OSSL_FUNC_BAR_NEWCTX, (void (*)(void))foo_newctx }, { OSSL_FUNC_BAR_FREECTX, (void (*)(void))foo_freectx }, { OSSL_FUNC_BAR_INIT, (void (*)(void))foo_init }, { OSSL_FUNC_BAR_UPDATE, (void (*)(void))foo_update }, { OSSL_FUNC_BAR_FINAL, (void (*)(void))foo_final }, { 0, NULL } }; static const OSSL_ALGORITHM bars[] = { { "FOO", "provider=chumbawamba", foo_fns }, { NULL, NULL, NULL } }; static const OSSL_ALGORITHM *p_query(void *provctx, int operation_id, int *no_store) { switch (operation_id) { case OSSL_OP_BAR: return bars; } return NULL; } static const OSSL_ITEM *p_reasons(void *provctx) { return reasons; } static void p_teardown(void *provctx) { free(provctx); } static const OSSL_DISPATCH prov_fns[] = { { OSSL_FUNC_PROVIDER_TEARDOWN, (void (*)(void))p_teardown }, { OSSL_FUNC_PROVIDER_QUERY_OPERATION, (void (*)(void))p_query }, { OSSL_FUNC_PROVIDER_GET_REASON_STRINGS, (void (*)(void))p_reasons }, { 0, NULL } }; int OSSL_provider_init(const OSSL_CORE_HANDLE *handle, const OSSL_DISPATCH *in, const OSSL_DISPATCH **out, void **provctx) { struct prov_ctx_st *pctx = NULL; for (; in->function_id != 0; in++) switch (in->function_id) { case OSSL_FUNC_CORE_PUT_ERROR: c_put_error = OSSL_FUNC_core_put_error(in); break; } *out = prov_fns; if ((pctx = malloc(sizeof(*pctx))) == NULL) { /* * ALEA IACTA EST, if the core retrieves the reason table * regardless, that string will be displayed, otherwise not. */ c_put_error(handle, E_MALLOC, __FILE__, __LINE__); return 0; } pctx->handle = handle; return 1; } This relies on a few things existing in F: #define OSSL_OP_BAR 4711 #define OSSL_FUNC_BAR_NEWCTX 1 typedef void *(OSSL_FUNC_bar_newctx_fn)(void *provctx); static ossl_inline OSSL_FUNC_bar_newctx(const OSSL_DISPATCH *opf) { return (OSSL_FUNC_bar_newctx_fn *)opf->function; } #define OSSL_FUNC_BAR_FREECTX 2 typedef void (OSSL_FUNC_bar_freectx_fn)(void *ctx); static ossl_inline OSSL_FUNC_bar_newctx(const OSSL_DISPATCH *opf) { return (OSSL_FUNC_bar_freectx_fn *)opf->function; } #define OSSL_FUNC_BAR_INIT 3 typedef void *(OSSL_FUNC_bar_init_fn)(void *ctx); static ossl_inline OSSL_FUNC_bar_init(const OSSL_DISPATCH *opf) { return (OSSL_FUNC_bar_init_fn *)opf->function; } #define OSSL_FUNC_BAR_UPDATE 4 typedef void *(OSSL_FUNC_bar_update_fn)(void *ctx, unsigned char *in, size_t inl); static ossl_inline OSSL_FUNC_bar_update(const OSSL_DISPATCH *opf) { return (OSSL_FUNC_bar_update_fn *)opf->function; } #define OSSL_FUNC_BAR_FINAL 5 typedef void *(OSSL_FUNC_bar_final_fn)(void *ctx); static ossl_inline OSSL_FUNC_bar_final(const OSSL_DISPATCH *opf) { return (OSSL_FUNC_bar_final_fn *)opf->function; } =head1 SEE ALSO L =head1 HISTORY The concept of providers and everything surrounding them was introduced in OpenSSL 3.0. =head1 COPYRIGHT Copyright 2019-2021 The OpenSSL Project Authors. All Rights Reserved. Licensed under the Apache License 2.0 (the "License"). You may not use this file except in compliance with the License. You can obtain a copy in the file LICENSE in the source distribution or at L. =cut