$! $! CRYPTO-LIB.COM $! Written By: Robert Byer $! Vice-President $! A-Com Computing, Inc. $! byer@mail.all-net.net $! $! Changes by Richard Levitte $! $! This command files compiles and creates the "[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB" $! library for OpenSSL. The "xxx" denotes the machine architecture of AXP $! or VAX. $! $! It was re-written so it would try to determine what "C" compiler to use $! or you can specify which "C" compiler to use. $! $! Specify the following as P1 to build just that part or ALL to just $! build everything. $! $! LIBRARY To just compile the [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library. $! APPS To just compile the [.xxx.EXE.CRYPTO]*.EXE $! ALL To do both LIBRARY and APPS $! $! Specify DEBUG or NODEBUG as P2 to compile with or without debugger $! information. $! $! Specify which compiler at P3 to try to compile under. $! $! VAXC For VAX C. $! DECC For DEC C. $! GNUC For GNU C. $! $! If you don't speficy a compiler, it will try to determine which $! "C" compiler to use. $! $! P4, if defined, sets a TCP/IP library to use, through one of the following $! keywords: $! $! UCX for UCX $! TCPIP for TCPIP (post UCX) $! SOCKETSHR for SOCKETSHR+NETLIB $! $! P5, if defined, sets a compiler thread NOT needed on OpenVMS 7.1 (and up) $! $! P6, if defined, sets a choice of crypto methods to compile. $! WARNING: this should only be done to recompile some part of an already $! fully compiled library. $! $! $! Define A TCP/IP Library That We Will Need To Link To. $! (That Is, If We Need To Link To One.) $! $ TCPIP_LIB = "" $! $! Check Which Architecture We Are Using. $! $ IF (F$GETSYI("CPU").GE.128) $ THEN $! $! The Architecture Is AXP $! $ ARCH := AXP $! $! Else... $! $ ELSE $! $! The Architecture Is VAX. $! $ ARCH := VAX $! $! End The Architecture Check. $! $ ENDIF $! $! Define The Different Encryption Types. $! $ ENCRYPT_TYPES = "Basic,"+ - "OBJECTS,"+ - "MD2,MD4,MD5,SHA,MDC2,HMAC,RIPEMD,WHRLPOOL,"+ - "DES,AES,RC2,RC4,RC5,IDEA,BF,CAST,"+ - "BN,EC,RSA,DSA,ECDSA,DH,ECDH,DSO,ENGINE,"+ - "BUFFER,BIO,STACK,LHASH,RAND,ERR,"+ - "EVP,EVP_2,EVP_3,ASN1,ASN1_2,PEM,X509,X509V3,"+ - "CONF,TXT_DB,PKCS7,PKCS12,COMP,OCSP,UI,KRB5,"+ - "STORE,PQUEUE,TS" $! $! Check To Make Sure We Have Valid Command Line Parameters. $! $ GOSUB CHECK_OPTIONS $! $! Initialise logical names and such $! $ GOSUB INITIALISE $! $! Tell The User What Kind of Machine We Run On. $! $ WRITE SYS$OUTPUT "Compiling On A ",ARCH," Machine." $! $! Define The OBJ Directory. $! $ OBJ_DIR := SYS$DISK:[-.'ARCH'.OBJ.CRYPTO] $! $! Check To See If The Architecture Specific OBJ Directory Exists. $! $ IF (F$PARSE(OBJ_DIR).EQS."") $ THEN $! $! It Dosen't Exist, So Create It. $! $ CREATE/DIR 'OBJ_DIR' $! $! End The Architecture Specific OBJ Directory Check. $! $ ENDIF $! $! Define The EXE Directory. $! $ EXE_DIR := SYS$DISK:[-.'ARCH'.EXE.CRYPTO] $! $! Check To See If The Architecture Specific Directory Exists. $! $ IF (F$PARSE(EXE_DIR).EQS."") $ THEN $! $! It Dosen't Exist, So Create It. $! $ CREATE/DIRECTORY 'EXE_DIR' $! $! End The Architecture Specific Directory Check. $! $ ENDIF $! $! Define The Library Name. $! $ LIB_NAME := 'EXE_DIR'LIBCRYPTO.OLB $! $! Define The CRYPTO-LIB We Are To Use. $! $ CRYPTO_LIB := 'EXE_DIR'LIBCRYPTO.OLB $! $! Check To See If We Already Have A "[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB" Library... $! $ IF (F$SEARCH(LIB_NAME).EQS."") $ THEN $! $! Guess Not, Create The Library. $! $ LIBRARY/CREATE/OBJECT 'LIB_NAME' $! $! End The Library Check. $! $ ENDIF $! $! Build our options file for the application $! $ GOSUB CHECK_OPT_FILE $! $! Define The Different Encryption "library" Strings. $! $ APPS_DES = "DES/DES,CBC3_ENC" $ APPS_PKCS7 = "ENC/ENC;DEC/DEC;SIGN/SIGN;VERIFY/VERIFY,EXAMPLE" $ $ LIB_ = "cryptlib,mem,mem_clr,mem_dbg,cversion,ex_data,cpt_err,ebcdic,uid,o_time,o_str,o_dir" $ LIB_MD2 = "md2_dgst,md2_one" $ LIB_MD4 = "md4_dgst,md4_one" $ LIB_MD5 = "md5_dgst,md5_one" $ LIB_SHA = "sha_dgst,sha1dgst,sha_one,sha1_one,sha256,sha512" $ LIB_MDC2 = "mdc2dgst,mdc2_one" $ LIB_HMAC = "hmac" $ LIB_RIPEMD = "rmd_dgst,rmd_one" $ LIB_WHRLPOOL = "wp_dgst,wp_block" $ LIB_DES = "set_key,ecb_enc,cbc_enc,"+ - "ecb3_enc,cfb64enc,cfb64ede,cfb_enc,ofb64ede,"+ - "enc_read,enc_writ,ofb64enc,"+ - "ofb_enc,str2key,pcbc_enc,qud_cksm,rand_key,"+ - "des_enc,fcrypt_b,"+ - "fcrypt,xcbc_enc,rpc_enc,cbc_cksm,"+ - "ede_cbcm_enc,des_old,des_old2,read2pwd" $ LIB_RC2 = "rc2_ecb,rc2_skey,rc2_cbc,rc2cfb64,rc2ofb64" $ LIB_RC4 = "rc4_skey,rc4_enc" $ LIB_RC5 = "rc5_skey,rc5_ecb,rc5_enc,rc5cfb64,rc5ofb64" $ LIB_IDEA = "i_cbc,i_cfb64,i_ofb64,i_ecb,i_skey" $ LIB_BF = "bf_skey,bf_ecb,bf_enc,bf_cfb64,bf_ofb64" $ LIB_CAST = "c_skey,c_ecb,c_enc,c_cfb64,c_ofb64" $ LIB_BN_ASM = "[.asm]vms.mar,vms-helper" $ IF F$TRNLNM("OPENSSL_NO_ASM").OR.ARCH.EQS."AXP" THEN LIB_BN_ASM = "bn_asm" $ LIB_BN = "bn_add,bn_div,bn_exp,bn_lib,bn_ctx,bn_mul,bn_mod,"+ - "bn_print,bn_rand,bn_shift,bn_word,bn_blind,"+ - "bn_kron,bn_sqrt,bn_gcd,bn_prime,bn_err,bn_sqr,"+LIB_BN_ASM+","+ - "bn_recp,bn_mont,bn_mpi,bn_exp2,bn_gf2m,bn_nist,"+ - "bn_depr,bn_const" $ LIB_EC = "ec_lib,ecp_smpl,ecp_mont,ecp_nist,ec_cvt,ec_mult,"+ - "ec_err,ec_curve,ec_check,ec_print,ec_asn1,ec_key,"+ - "ec2_smpl,ec2_mult,ec_ameth,ec_pmeth,eck_prn" $ LIB_RSA = "rsa_eay,rsa_gen,rsa_lib,rsa_sign,rsa_saos,rsa_err,"+ - "rsa_pk1,rsa_ssl,rsa_none,rsa_oaep,rsa_chk,rsa_null,"+ - "rsa_pss,rsa_x931,rsa_asn1,rsa_depr,rsa_ameth,rsa_prn,"+ - "rsa_pmeth" $ LIB_DSA = "dsa_gen,dsa_key,dsa_lib,dsa_asn1,dsa_vrf,dsa_sign,"+ - "dsa_err,dsa_ossl,dsa_depr,dsa_ameth,dsa_pmeth,dsa_prn" $ LIB_ECDSA = "ecs_lib,ecs_asn1,ecs_ossl,ecs_sign,ecs_vrf,ecs_err" $ LIB_DH = "dh_asn1,dh_gen,dh_key,dh_lib,dh_check,dh_err,dh_depr,"+ - "dh_ameth,dh_pmeth,dh_prn" $ LIB_ECDH = "ech_lib,ech_ossl,ech_key,ech_err" $ LIB_DSO = "dso_dl,dso_dlfcn,dso_err,dso_lib,dso_null,"+ - "dso_openssl,dso_win32,dso_vms,dso_beos" $ LIB_ENGINE = "eng_err,eng_lib,eng_list,eng_init,eng_ctrl,"+ - "eng_table,eng_pkey,eng_fat,eng_all,"+ - "tb_rsa,tb_dsa,tb_ecdsa,tb_dh,tb_ecdh,tb_rand,tb_store,"+ - "tb_cipher,tb_digest,"+ - "eng_openssl,eng_dyn,eng_cnf,eng_cryptodev,eng_padlock" $ LIB_AES = "aes_core,aes_misc,aes_ecb,aes_cbc,aes_cfb,aes_ofb,aes_ctr" $ LIB_BUFFER = "buffer,buf_err" $ LIB_BIO = "bio_lib,bio_cb,bio_err,"+ - "bss_mem,bss_null,bss_fd,"+ - "bss_file,bss_sock,bss_conn,"+ - "bf_null,bf_buff,b_print,b_dump,"+ - "b_sock,bss_acpt,bf_nbio,bss_rtcp,bss_bio,bss_log,"+ - "bss_dgram,"+ - "bf_lbuf" $ LIB_STACK = "stack" $ LIB_LHASH = "lhash,lh_stats" $ LIB_RAND = "md_rand,randfile,rand_lib,rand_err,rand_egd,"+ - "rand_vms" $ LIB_ERR = "err,err_all,err_prn" $ LIB_OBJECTS = "o_names,obj_dat,obj_lib,obj_err,obj_xref" $ LIB_EVP = "encode,digest,evp_enc,evp_key,evp_acnf,"+ - "e_des,e_bf,e_idea,e_des3,"+ - "e_rc4,e_aes,names,"+ - "e_xcbc_d,e_rc2,e_cast,e_rc5" $ LIB_EVP_2 = "m_null,m_md2,m_md4,m_md5,m_sha,m_sha1,m_wp," + - "m_dss,m_dss1,m_mdc2,m_ripemd,m_ecdsa,"+ - "p_open,p_seal,p_sign,p_verify,p_lib,p_enc,p_dec,"+ - "bio_md,bio_b64,bio_enc,evp_err,e_null,"+ - "c_all,c_allc,c_alld,evp_lib,bio_ok,"+- "evp_pkey,evp_pbe,p5_crpt,p5_crpt2" $ LIB_EVP_3 = "e_old,pmeth_lib,pmeth_fn,pmeth_gn" $ LIB_ASN1 = "a_object,a_bitstr,a_utctm,a_gentm,a_time,a_int,a_octet,"+ - "a_print,a_type,a_set,a_dup,a_d2i_fp,a_i2d_fp,"+ - "a_enum,a_utf8,a_sign,a_digest,a_verify,a_mbstr,a_strex,"+ - "x_algor,x_val,x_pubkey,x_sig,x_req,x_attrib,x_bignum,"+ - "x_long,x_name,x_x509,x_x509a,x_crl,x_info,x_spki,nsseq,"+ - "x_nx509,d2i_pu,d2i_pr,i2d_pu,i2d_pr" $ LIB_ASN1_2 = "t_req,t_x509,t_x509a,t_crl,t_pkey,t_spki,t_bitst,"+ - "tasn_new,tasn_fre,tasn_enc,tasn_dec,tasn_utl,tasn_typ,"+ - "tasn_prn,ameth_lib,"+ - "f_int,f_string,n_pkey,"+ - "f_enum,x_pkey,a_bool,x_exten,"+ - "asn1_gen,asn1_par,asn1_lib,asn1_err,a_bytes,a_strnid,"+ - "evp_asn1,asn_pack,p5_pbe,p5_pbev2,p8_pkey,asn_moid" $ LIB_PEM = "pem_sign,pem_seal,pem_info,pem_lib,pem_all,pem_err,"+ - "pem_x509,pem_xaux,pem_oth,pem_pk8,pem_pkey,pvkfmt" $ LIB_X509 = "x509_def,x509_d2,x509_r2x,x509_cmp,"+ - "x509_obj,x509_req,x509spki,x509_vfy,"+ - "x509_set,x509cset,x509rset,x509_err,"+ - "x509name,x509_v3,x509_ext,x509_att,"+ - "x509type,x509_lu,x_all,x509_txt,"+ - "x509_trs,by_file,by_dir,x509_vpm" $ LIB_X509V3 = "v3_bcons,v3_bitst,v3_conf,v3_extku,v3_ia5,v3_lib,"+ - "v3_prn,v3_utl,v3err,v3_genn,v3_alt,v3_skey,v3_akey,v3_pku,"+ - "v3_int,v3_enum,v3_sxnet,v3_cpols,v3_crld,v3_purp,v3_info,"+ - "v3_ocsp,v3_akeya,v3_pmaps,v3_pcons,v3_ncons,v3_pcia,v3_pci,"+ - "pcy_cache,pcy_node,pcy_data,pcy_map,pcy_tree,pcy_lib" $ LIB_CONF = "conf_err,conf_lib,conf_api,conf_def,conf_mod,conf_mall,conf_sap" $ LIB_TXT_DB = "txt_db" $ LIB_PKCS7 = "pk7_asn1,pk7_lib,pkcs7err,pk7_doit,pk7_smime,pk7_attr,"+ - "pk7_mime" $ LIB_PKCS12 = "p12_add,p12_asn,p12_attr,p12_crpt,p12_crt,p12_decr,"+ - "p12_init,p12_key,p12_kiss,p12_mutl,"+ - "p12_utl,p12_npas,pk12err,p12_p8d,p12_p8e" $ LIB_COMP = "comp_lib,comp_err,"+ - "c_rle,c_zlib" $ LIB_OCSP = "ocsp_asn,ocsp_ext,ocsp_ht,ocsp_lib,ocsp_cl,"+ - "ocsp_srv,ocsp_prn,ocsp_vfy,ocsp_err" $ LIB_UI_COMPAT = ",ui_compat" $ LIB_UI = "ui_err,ui_lib,ui_openssl,ui_util"+LIB_UI_COMPAT $ LIB_KRB5 = "krb5_asn" $ LIB_STORE = "str_err,str_lib,str_meth,str_mem" $ LIB_PQUEUE = "pqueue" $ LIB_TS = "ts_err,ts_req_utils,ts_req_print,ts_rsp_utils,ts_rsp_print,"+ - "ts_rsp_sign,ts_rsp_verify,ts_verify_ctx,ts_lib,ts_conf,"+ - "ts_asn1" $! $! Setup exceptional compilations $! $ ! Add definitions for no threads on OpenVMS 7.1 and higher $ COMPILEWITH_CC3 = ",bss_rtcp," $ ! Disable the DOLLARID warning $ COMPILEWITH_CC4 = ",a_utctm,bss_log,o_time,o_dir" $ ! Disable disjoint optimization $ COMPILEWITH_CC5 = ",md2_dgst,md4_dgst,md5_dgst,mdc2dgst," + - "sha_dgst,sha1dgst,rmd_dgst,bf_enc," $ ! Disable the MIXLINKAGE warning $ COMPILEWITH_CC6 = ",enc_read,set_key," $! $! Figure Out What Other Modules We Are To Build. $! $ BUILD_SET: $! $! Define A Module Counter. $! $ MODULE_COUNTER = 0 $! $! Top Of The Loop. $! $ MODULE_NEXT: $! $! Extract The Module Name From The Encryption List. $! $ MODULE_NAME = F$ELEMENT(MODULE_COUNTER,",",ENCRYPT_TYPES) $ IF MODULE_NAME.EQS."Basic" THEN MODULE_NAME = "" $ MODULE_NAME1 = MODULE_NAME $! $! Check To See If We Are At The End Of The Module List. $! $ IF (MODULE_NAME.EQS.",") $ THEN $! $! We Are At The End Of The Module List, Go To MODULE_DONE. $! $ GOTO MODULE_DONE $! $! End The Module List Check. $! $ ENDIF $! $! Increment The Moudle Counter. $! $ MODULE_COUNTER = MODULE_COUNTER + 1 $! $! Create The Library and Apps Module Names. $! $ LIB_MODULE = "LIB_" + MODULE_NAME $ APPS_MODULE = "APPS_" + MODULE_NAME $ IF (MODULE_NAME.EQS."ASN1_2") $ THEN $ MODULE_NAME = "ASN1" $ ENDIF $ IF (MODULE_NAME.EQS."EVP_2".OR.MODULE_NAME.EQS."EVP_3") $ THEN $ MODULE_NAME = "EVP" $ ENDIF $! $! Set state (can be LIB and APPS) $! $ STATE = "LIB" $ IF BUILDALL .EQS. "APPS" THEN STATE = "APPS" $! $! Check if the library module name actually is defined $! $ IF F$TYPE('LIB_MODULE') .EQS. "" $ THEN $ WRITE SYS$ERROR "" $ WRITE SYS$ERROR "The module ",MODULE_NAME," does not exist. Continuing..." $ WRITE SYS$ERROR "" $ GOTO MODULE_NEXT $ ENDIF $! $! Top Of The Module Loop. $! $ MODULE_AGAIN: $! $! Tell The User What Module We Are Building. $! $ IF (MODULE_NAME1.NES."") $ THEN $ IF STATE .EQS. "LIB" $ THEN $ WRITE SYS$OUTPUT "Compiling The ",MODULE_NAME1," Library Files. (",BUILDALL,",",STATE,")" $ ELSE IF F$TYPE('APPS_MODULE') .NES. "" $ THEN $ WRITE SYS$OUTPUT "Compiling The ",MODULE_NAME1," Applications. (",BUILDALL,",",STATE,")" $ ENDIF $ ENDIF $ ENDIF $! $! Define A File Counter And Set It To "0". $! $ FILE_COUNTER = 0 $ APPLICATION = "" $ APPLICATION_COUNTER = 0 $! $! Top Of The File Loop. $! $ NEXT_FILE: $! $! Look in the LIB_MODULE is we're in state LIB $! $ IF STATE .EQS. "LIB" $ THEN $! $! O.K, Extract The File Name From The File List. $! $ FILE_NAME = F$ELEMENT(FILE_COUNTER,",",'LIB_MODULE') $! $! else $! $ ELSE $ FILE_NAME = "," $! $ IF F$TYPE('APPS_MODULE') .NES. "" $ THEN $! $! Extract The File Name From The File List. $! This part is a bit more complicated. $! $ IF APPLICATION .EQS. "" $ THEN $ APPLICATION = F$ELEMENT(APPLICATION_COUNTER,";",'APPS_MODULE') $ APPLICATION_COUNTER = APPLICATION_COUNTER + 1 $ APPLICATION_OBJECTS = F$ELEMENT(1,"/",APPLICATION) $ APPLICATION = F$ELEMENT(0,"/",APPLICATION) $ FILE_COUNTER = 0 $ ENDIF $ $! WRITE SYS$OUTPUT "DEBUG: SHOW SYMBOL APPLICATION*" $! SHOW SYMBOL APPLICATION* $! $ IF APPLICATION .NES. ";" $ THEN $ FILE_NAME = F$ELEMENT(FILE_COUNTER,",",APPLICATION_OBJECTS) $ IF FILE_NAME .EQS. "," $ THEN $ APPLICATION = "" $ GOTO NEXT_FILE $ ENDIF $ ENDIF $ ENDIF $ ENDIF $! $! Check To See If We Are At The End Of The File List. $! $ IF (FILE_NAME.EQS.",") $ THEN $! $! We Are At The End Of The File List, Change State Or Goto FILE_DONE. $! $ IF STATE .EQS. "LIB" .AND. BUILDALL .NES. "LIBRARY" $ THEN $ STATE = "APPS" $ GOTO MODULE_AGAIN $ ELSE $ GOTO FILE_DONE $ ENDIF $! $! End The File List Check. $! $ ENDIF $! $! Increment The Counter. $! $ FILE_COUNTER = FILE_COUNTER + 1 $! $! Create The Source File Name. $! $ TMP_FILE_NAME = F$ELEMENT(1,"]",FILE_NAME) $ IF TMP_FILE_NAME .EQS. "]" THEN TMP_FILE_NAME = FILE_NAME $ IF F$ELEMENT(0,".",TMP_FILE_NAME) .EQS. TMP_FILE_NAME THEN - FILE_NAME = FILE_NAME + ".c" $ IF (MODULE_NAME.NES."") $ THEN $ SOURCE_FILE = "SYS$DISK:[." + MODULE_NAME+ "]" + FILE_NAME $ ELSE $ SOURCE_FILE = "SYS$DISK:[]" + FILE_NAME $ ENDIF $ SOURCE_FILE = SOURCE_FILE - "][" $! $! Create The Object File Name. $! $ OBJECT_FILE = OBJ_DIR + F$PARSE(FILE_NAME,,,"NAME","SYNTAX_ONLY") + ".OBJ" $ ON WARNING THEN GOTO NEXT_FILE $! $! Check To See If The File We Want To Compile Is Actually There. $! $ IF (F$SEARCH(SOURCE_FILE).EQS."") $ THEN $! $! Tell The User That The File Doesn't Exist. $! $ WRITE SYS$OUTPUT "" $ WRITE SYS$OUTPUT "The File ",SOURCE_FILE," Doesn't Exist." $ WRITE SYS$OUTPUT "" $! $! Exit The Build. $! $ GOTO EXIT $! $! End The File Exist Check. $! $ ENDIF $! $! Tell The User We Are Compiling The File. $! $ IF (MODULE_NAME.EQS."") $ THEN $ WRITE SYS$OUTPUT "Compiling The ",FILE_NAME," File. (",BUILDALL,",",STATE,")" $ ENDIF $ IF (MODULE_NAME.NES."") $ THEN $ WRITE SYS$OUTPUT " ",FILE_NAME,"" $ ENDIF $! $! Compile The File. $! $ ON ERROR THEN GOTO NEXT_FILE $ FILE_NAME0 = F$ELEMENT(0,".",FILE_NAME) $ IF FILE_NAME - ".mar" .NES. FILE_NAME $ THEN $ MACRO/OBJECT='OBJECT_FILE' 'SOURCE_FILE' $ ELSE $ IF COMPILEWITH_CC3 - FILE_NAME0 .NES. COMPILEWITH_CC3 $ THEN $ CC3/OBJECT='OBJECT_FILE' 'SOURCE_FILE' $ ELSE $ IF COMPILEWITH_CC4 - FILE_NAME0 .NES. COMPILEWITH_CC4 $ THEN $ CC4/OBJECT='OBJECT_FILE' 'SOURCE_FILE' $ ELSE $ IF COMPILEWITH_CC5 - FILE_NAME0 .NES. COMPILEWITH_CC5 $ THEN $ CC5/OBJECT='OBJECT_FILE' 'SOURCE_FILE' $ ELSE $ IF COMPILEWITH_CC6 - FILE_NAME0 .NES. COMPILEWITH_CC6 $ THEN $ CC6/OBJECT='OBJECT_FILE' 'SOURCE_FILE' $ ELSE $ CC/OBJECT='OBJECT_FILE' 'SOURCE_FILE' $ ENDIF $ ENDIF $ ENDIF $ ENDIF $ ENDIF $ IF STATE .EQS. "LIB" $ THEN $! $! Add It To The Library. $! $ LIBRARY/REPLACE 'LIB_NAME' 'OBJECT_FILE' $! $! Time To Clean Up The Object File. $! $ DELETE 'OBJECT_FILE';* $ ENDIF $! $! Go Back And Do It Again. $! $ GOTO NEXT_FILE $! $! All Done With This Library Part. $! $ FILE_DONE: $! $! Time To Build Some Applications $! $ IF F$TYPE('APPS_MODULE') .NES. "" .AND. BUILDALL .NES. "LIBRARY" $ THEN $ APPLICATION_COUNTER = 0 $ NEXT_APPLICATION: $ APPLICATION = F$ELEMENT(APPLICATION_COUNTER,";",'APPS_MODULE') $ IF APPLICATION .EQS. ";" THEN GOTO APPLICATION_DONE $ $ APPLICATION_COUNTER = APPLICATION_COUNTER + 1 $ APPLICATION_OBJECTS = F$ELEMENT(1,"/",APPLICATION) $ APPLICATION = F$ELEMENT(0,"/",APPLICATION) $ $! WRITE SYS$OUTPUT "DEBUG: SHOW SYMBOL APPLICATION*" $! SHOW SYMBOL APPLICATION* $! $! Tell the user what happens $! $ WRITE SYS$OUTPUT " ",APPLICATION,".exe" $! $! Link The Program. $! $ ON ERROR THEN GOTO NEXT_APPLICATION $! $! Check To See If We Are To Link With A Specific TCP/IP Library. $! $ IF (TCPIP_LIB.NES."") $ THEN $! $! Link With A TCP/IP Library. $! $ LINK/'DEBUGGER'/'TRACEBACK'/EXE='EXE_DIR''APPLICATION'.EXE - 'OBJ_DIR''APPLICATION_OBJECTS', - 'CRYPTO_LIB'/LIBRARY, - 'TCPIP_LIB','OPT_FILE'/OPTION $! $! Else... $! $ ELSE $! $! Don't Link With A TCP/IP Library. $! $ LINK/'DEBUGGER'/'TRACEBACK'/EXE='EXE_DIR''APPLICATION'.EXE - 'OBJ_DIR''APPLICATION_OBJECTS',- 'CRYPTO_LIB'/LIBRARY, - 'OPT_FILE'/OPTION $! $! End The TCP/IP Library Check. $! $ ENDIF $ GOTO NEXT_APPLICATION $ APPLICATION_DONE: $ ENDIF $! $! Go Back And Get The Next Module. $! $ GOTO MODULE_NEXT $! $! All Done With This Module. $! $ MODULE_DONE: $! $! Tell The User That We Are All Done. $! $ WRITE SYS$OUTPUT "All Done..." $ EXIT: $ GOSUB CLEANUP $ EXIT $! $! Check For The Link Option FIle. $! $ CHECK_OPT_FILE: $! $! Check To See If We Need To Make A VAX C Option File. $! $ IF (COMPILER.EQS."VAXC") $ THEN $! $! Check To See If We Already Have A VAX C Linker Option File. $! $ IF (F$SEARCH(OPT_FILE).EQS."") $ THEN $! $! We Need A VAX C Linker Option File. $! $ CREATE 'OPT_FILE' $DECK ! ! Default System Options File To Link Agianst ! The Sharable VAX C Runtime Library. ! SYS$SHARE:VAXCRTL.EXE/SHARE $EOD $! $! End The Option File Check. $! $ ENDIF $! $! End The VAXC Check. $! $ ENDIF $! $! Check To See If We Need A GNU C Option File. $! $ IF (COMPILER.EQS."GNUC") $ THEN $! $! Check To See If We Already Have A GNU C Linker Option File. $! $ IF (F$SEARCH(OPT_FILE).EQS."") $ THEN $! $! We Need A GNU C Linker Option File. $! $ CREATE 'OPT_FILE' $DECK ! ! Default System Options File To Link Agianst ! The Sharable C Runtime Library. ! GNU_CC:[000000]GCCLIB/LIBRARY SYS$SHARE:VAXCRTL/SHARE $EOD $! $! End The Option File Check. $! $ ENDIF $! $! End The GNU C Check. $! $ ENDIF $! $! Check To See If We Need A DEC C Option File. $! $ IF (COMPILER.EQS."DECC") $ THEN $! $! Check To See If We Already Have A DEC C Linker Option File. $! $ IF (F$SEARCH(OPT_FILE).EQS."") $ THEN $! $! Figure Out If We Need An AXP Or A VAX Linker Option File. $! $ IF ARCH .EQS. "VAX" $ THEN $! $! We Need A DEC C Linker Option File For VAX. $! $ CREATE 'OPT_FILE' $DECK ! ! Default System Options File To Link Agianst ! The Sharable DEC C Runtime Library. ! SYS$SHARE:DECC$SHR.EXE/SHARE $EOD $! $! Else... $! $ ELSE $! $! Create The AXP Linker Option File. $! $ CREATE 'OPT_FILE' $DECK ! ! Default System Options File For AXP To Link Agianst ! The Sharable C Runtime Library. ! SYS$SHARE:CMA$OPEN_LIB_SHR/SHARE SYS$SHARE:CMA$OPEN_RTL/SHARE $EOD $! $! End The VAX/AXP DEC C Option File Check. $! $ ENDIF $! $! End The Option File Search. $! $ ENDIF $! $! End The DEC C Check. $! $ ENDIF $! $! Tell The User What Linker Option File We Are Using. $! $ WRITE SYS$OUTPUT "Using Linker Option File ",OPT_FILE,"." $! $! Time To RETURN. $! $ RETURN $! $! Check The User's Options. $! $ CHECK_OPTIONS: $! $! Check To See If P1 Is Blank. $! $ IF (P1.EQS."ALL") $ THEN $! $! P1 Is Blank, So Build Everything. $! $ BUILDALL = "TRUE" $! $! Else... $! $ ELSE $! $! Else, Check To See If P1 Has A Valid Arguement. $! $ IF (P1.EQS."LIBRARY").OR.(P1.EQS."APPS") $ THEN $! $! A Valid Arguement. $! $ BUILDALL = P1 $! $! Else... $! $ ELSE $! $! Tell The User We Don't Know What They Want. $! $ WRITE SYS$OUTPUT "" $ WRITE SYS$OUTPUT "The Option ",P1," Is Invalid. The Valid Options Are:" $ WRITE SYS$OUTPUT "" $ WRITE SYS$OUTPUT " ALL : Just Build Everything." $ WRITE SYS$OUTPUT " LIBRARY : To Compile Just The [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library." $ WRITE SYS$OUTPUT " APPS : To Compile Just The [.xxx.EXE.CRYPTO]*.EXE Programs." $ WRITE SYS$OUTPUT "" $ WRITE SYS$OUTPUT " Where 'xxx' Stands For:" $ WRITE SYS$OUTPUT "" $ WRITE SYS$OUTPUT " AXP : Alpha Architecture." $ WRITE SYS$OUTPUT " VAX : VAX Architecture." $ WRITE SYS$OUTPUT "" $! $! Time To EXIT. $! $ EXIT $! $! End The Valid Arguement Check. $! $ ENDIF $! $! End The P1 Check. $! $ ENDIF $! $! Check To See If P2 Is Blank. $! $ IF (P2.EQS."NODEBUG") $ THEN $! $! P2 Is NODEBUG, So Compile Without The Debugger Information. $! $ DEBUGGER = "NODEBUG" $ TRACEBACK = "NOTRACEBACK" $ GCC_OPTIMIZE = "OPTIMIZE" $ CC_OPTIMIZE = "OPTIMIZE" $ MACRO_OPTIMIZE = "OPTIMIZE" $ WRITE SYS$OUTPUT "No Debugger Information Will Be Produced During Compile." $ WRITE SYS$OUTPUT "Compiling With Compiler Optimization." $ ELSE $! $! Check To See If We Are To Compile With Debugger Information. $! $ IF (P2.EQS."DEBUG") $ THEN $! $! Compile With Debugger Information. $! $ DEBUGGER = "DEBUG" $ TRACEBACK = "TRACEBACK" $ GCC_OPTIMIZE = "NOOPTIMIZE" $ CC_OPTIMIZE = "NOOPTIMIZE" $ MACRO_OPTIMIZE = "NOOPTIMIZE" $ WRITE SYS$OUTPUT "Debugger Information Will Be Produced During Compile." $ WRITE SYS$OUTPUT "Compiling Without Compiler Optimization." $ ELSE $! $! They Entered An Invalid Option.. $! $ WRITE SYS$OUTPUT "" $ WRITE SYS$OUTPUT "The Option ",P2," Is Invalid. The Valid Options Are:" $ WRITE SYS$OUTPUT "" $ WRITE SYS$OUTPUT " DEBUG : Compile With The Debugger Information." $ WRITE SYS$OUTPUT " NODEBUG : Compile Without The Debugger Information." $ WRITE SYS$OUTPUT "" $! $! Time To EXIT. $! $ EXIT $! $! End The Valid Arguement Check. $! $ ENDIF $! $! End The P2 Check. $! $ ENDIF $! $! Special Threads For OpenVMS v7.1 Or Later $! $! Written By: Richard Levitte $! richard@levitte.org $! $! $! Check To See If We Have A Option For P5. $! $ IF (P5.EQS."") $ THEN $! $! Get The Version Of VMS We Are Using. $! $ ISSEVEN := $ TMP = F$ELEMENT(0,"-",F$EXTRACT(1,4,F$GETSYI("VERSION"))) $ TMP = F$INTEGER(F$ELEMENT(0,".",TMP)+F$ELEMENT(1,".",TMP)) $! $! Check To See If The VMS Version Is v7.1 Or Later. $! $ IF (TMP.GE.71) $ THEN $! $! We Have OpenVMS v7.1 Or Later, So Use The Special Threads. $! $ ISSEVEN := ,PTHREAD_USE_D4 $! $! End The VMS Version Check. $! $ ENDIF $! $! End The P5 Check. $! $ ENDIF $! $! Check To See If P3 Is Blank. $! $ IF (P3.EQS."") $ THEN $! $! O.K., The User Didn't Specify A Compiler, Let's Try To $! Find Out Which One To Use. $! $! Check To See If We Have GNU C. $! $ IF (F$TRNLNM("GNU_CC").NES."") $ THEN $! $! Looks Like GNUC, Set To Use GNUC. $! $ P3 = "GNUC" $! $! Else... $! $ ELSE $! $! Check To See If We Have VAXC Or DECC. $! $ IF (ARCH.EQS."AXP").OR.(F$TRNLNM("DECC$CC_DEFAULT").NES."") $ THEN $! $! Looks Like DECC, Set To Use DECC. $! $ P3 = "DECC" $! $! Else... $! $ ELSE $! $! Looks Like VAXC, Set To Use VAXC. $! $ P3 = "VAXC" $! $! End The VAXC Compiler Check. $! $ ENDIF $! $! End The DECC & VAXC Compiler Check. $! $ ENDIF $! $! End The Compiler Check. $! $ ENDIF $! $! Check To See If We Have A Option For P4. $! $ IF (P4.EQS."") $ THEN $! $! Find out what socket library we have available $! $ IF F$PARSE("SOCKETSHR:") .NES. "" $ THEN $! $! We have SOCKETSHR, and it is my opinion that it's the best to use. $! $ P4 = "SOCKETSHR" $! $! Tell the user $! $ WRITE SYS$OUTPUT "Using SOCKETSHR for TCP/IP" $! $! Else, let's look for something else $! $ ELSE $! $! Like UCX (the reason to do this before Multinet is that the UCX $! emulation is easier to use...) $! $ IF F$TRNLNM("UCX$IPC_SHR") .NES. "" - .OR. F$PARSE("SYS$SHARE:UCX$IPC_SHR.EXE") .NES. "" - .OR. F$PARSE("SYS$LIBRARY:UCX$IPC.OLB") .NES. "" $ THEN $! $! Last resort: a UCX or UCX-compatible library $! $ P4 = "UCX" $! $! Tell the user $! $ WRITE SYS$OUTPUT "Using UCX or an emulation thereof for TCP/IP" $! $! That was all... $! $ ENDIF $ ENDIF $ ENDIF $! $! Set Up Initial CC Definitions, Possibly With User Ones $! $ CCDEFS = "TCPIP_TYPE_''P4',DSO_VMS" $ IF F$TYPE(USER_CCDEFS) .NES. "" THEN CCDEFS = CCDEFS + "," + USER_CCDEFS $ CCEXTRAFLAGS = "" $ IF F$TYPE(USER_CCFLAGS) .NES. "" THEN CCEXTRAFLAGS = USER_CCFLAGS $ CCDISABLEWARNINGS = "LONGLONGTYPE,LONGLONGSUFX,FOUNDCR" $ IF F$TYPE(USER_CCDISABLEWARNINGS) .NES. "" THEN - CCDISABLEWARNINGS = CCDISABLEWARNINGS + "," + USER_CCDISABLEWARNINGS $! $! Check To See If The User Entered A Valid Paramter. $! $ IF (P3.EQS."VAXC").OR.(P3.EQS."DECC").OR.(P3.EQS."GNUC") $ THEN $! $! Check To See If The User Wanted DECC. $! $ IF (P3.EQS."DECC") $ THEN $! $! Looks Like DECC, Set To Use DECC. $! $ COMPILER = "DECC" $! $! Tell The User We Are Using DECC. $! $ WRITE SYS$OUTPUT "Using DECC 'C' Compiler." $! $! Use DECC... $! $ CC = "CC" $ IF ARCH.EQS."VAX" .AND. F$TRNLNM("DECC$CC_DEFAULT").NES."/DECC" - THEN CC = "CC/DECC" $ CC = CC + "/''CC_OPTIMIZE'/''DEBUGGER'/STANDARD=ANSI89" + - "/NOLIST/PREFIX=ALL" + - "/INCLUDE=(SYS$DISK:[],SYS$DISK:[-],SYS$DISK:[.ENGINE.VENDOR_DEFNS],SYS$DISK:[.EVP],SYS$DISK:[.ASN1])" + - CCEXTRAFLAGS $! $! Define The Linker Options File Name. $! $ OPT_FILE = "SYS$DISK:[]VAX_DECC_OPTIONS.OPT" $! $! End DECC Check. $! $ ENDIF $! $! Check To See If We Are To Use VAXC. $! $ IF (P3.EQS."VAXC") $ THEN $! $! Looks Like VAXC, Set To Use VAXC. $! $ COMPILER = "VAXC" $! $! Tell The User We Are Using VAX C. $! $ WRITE SYS$OUTPUT "Using VAXC 'C' Compiler." $! $! Compile Using VAXC. $! $ CC = "CC" $ IF ARCH.EQS."AXP" $ THEN $ WRITE SYS$OUTPUT "There is no VAX C on Alpha!" $ EXIT $ ENDIF $ IF F$TRNLNM("DECC$CC_DEFAULT").EQS."/DECC" THEN CC = "CC/VAXC" $ CC = CC + "/''CC_OPTIMIZE'/''DEBUGGER'/NOLIST" + - "/INCLUDE=(SYS$DISK:[],SYS$DISK:[-],SYS$DISK:[.ENGINE.VENDOR_DEFNS],SYS$DISK:[.EVP],SYS$DISK:[.ASN1])" + - CCEXTRAFLAGS $ CCDEFS = """VAXC""," + CCDEFS $! $! Define As SYS$COMMON:[SYSLIB] $! $ DEFINE/NOLOG SYS SYS$COMMON:[SYSLIB] $! $! Define The Linker Options File Name. $! $ OPT_FILE = "SYS$DISK:[]VAX_VAXC_OPTIONS.OPT" $! $! End VAXC Check $! $ ENDIF $! $! Check To See If We Are To Use GNU C. $! $ IF (P3.EQS."GNUC") $ THEN $! $! Looks Like GNUC, Set To Use GNUC. $! $ COMPILER = "GNUC" $! $! Tell The User We Are Using GNUC. $! $ WRITE SYS$OUTPUT "Using GNU 'C' Compiler." $! $! Use GNU C... $! $ CC = "GCC/NOCASE_HACK/''GCC_OPTIMIZE'/''DEBUGGER'/NOLIST" + - "/INCLUDE=(SYS$DISK:[],SYS$DISK:[-],SYS$DISK:[.ENGINE.VENDOR_DEFNS],SYS$DISK:[.EVP],SYS$DISK:[.ASN1])" + - CCEXTRAFLAGS $! $! Define The Linker Options File Name. $! $ OPT_FILE = "SYS$DISK:[]VAX_GNUC_OPTIONS.OPT" $! $! End The GNU C Check. $! $ ENDIF $! $! Set up default defines $! $ CCDEFS = """FLAT_INC=1""," + CCDEFS $! $! Finish up the definition of CC. $! $ IF COMPILER .EQS. "DECC" $ THEN $ IF CCDISABLEWARNINGS .EQS. "" $ THEN $ CC4DISABLEWARNINGS = "DOLLARID" $ CC6DISABLEWARNINGS = "MIXLINKAGE" $ ELSE $ CC4DISABLEWARNINGS = CCDISABLEWARNINGS + ",DOLLARID" $ CC6DISABLEWARNINGS = CCDISABLEWARNINGS + ",MIXLINKAGE" $ CCDISABLEWARNINGS = "/WARNING=(DISABLE=(" + CCDISABLEWARNINGS + "))" $ ENDIF $ CC4DISABLEWARNINGS = "/WARNING=(DISABLE=(" + CC4DISABLEWARNINGS + "))" $ CC6DISABLEWARNINGS = "/WARNING=(DISABLE=(" + CC6DISABLEWARNINGS + "))" $ ELSE $ CCDISABLEWARNINGS = "" $ CC4DISABLEWARNINGS = "" $ CC6DISABLEWARNINGS = "" $ ENDIF $ CC3 = CC + "/DEFINE=(" + CCDEFS + ISSEVEN + ")" + CCDISABLEWARNINGS $ CC = CC + "/DEFINE=(" + CCDEFS + ")" + CCDISABLEWARNINGS $ IF ARCH .EQS. "VAX" .AND. COMPILER .EQS. "DECC" .AND. P2 .NES. "DEBUG" $ THEN $ CC5 = CC + "/OPTIMIZE=NODISJOINT" $ ELSE $ CC5 = CC + "/NOOPTIMIZE" $ ENDIF $ CC4 = CC - CCDISABLEWARNINGS + CC4DISABLEWARNINGS $ CC6 = CC - CCDISABLEWARNINGS + CC6DISABLEWARNINGS $! $! Show user the result $! $ WRITE/SYMBOL SYS$OUTPUT "Main C Compiling Command: ",CC $! $! Else The User Entered An Invalid Arguement. $! $ ELSE $! $! Tell The User We Don't Know What They Want. $! $ WRITE SYS$OUTPUT "" $ WRITE SYS$OUTPUT "The Option ",P3," Is Invalid. The Valid Options Are:" $ WRITE SYS$OUTPUT "" $ WRITE SYS$OUTPUT " VAXC : To Compile With VAX C." $ WRITE SYS$OUTPUT " DECC : To Compile With DEC C." $ WRITE SYS$OUTPUT " GNUC : To Compile With GNU C." $ WRITE SYS$OUTPUT "" $! $! Time To EXIT. $! $ EXIT $! $! End The Valid Arguement Check. $! $ ENDIF $! $! Build a MACRO command for the architecture at hand $! $ IF ARCH .EQS. "VAX" THEN MACRO = "MACRO/''DEBUGGER'" $ IF ARCH .EQS. "AXP" THEN MACRO = "MACRO/MIGRATION/''DEBUGGER'/''MACRO_OPTIMIZE'" $! $! Show user the result $! $ WRITE/SYMBOL SYS$OUTPUT "Main MACRO Compiling Command: ",MACRO $! $! Time to check the contents, and to make sure we get the correct library. $! $ IF P4.EQS."SOCKETSHR" .OR. P4.EQS."MULTINET" .OR. P4.EQS."UCX" - .OR. P4.EQS."TCPIP" .OR. P4.EQS."NONE" $ THEN $! $! Check to see if SOCKETSHR was chosen $! $ IF P4.EQS."SOCKETSHR" $ THEN $! $! Set the library to use SOCKETSHR $! $ TCPIP_LIB = "SYS$DISK:[-.VMS]SOCKETSHR_SHR.OPT/OPT" $! $! Done with SOCKETSHR $! $ ENDIF $! $! Check to see if MULTINET was chosen $! $ IF P4.EQS."MULTINET" $ THEN $! $! Set the library to use UCX emulation. $! $ P4 = "UCX" $! $! Done with MULTINET $! $ ENDIF $! $! Check to see if UCX was chosen $! $ IF P4.EQS."UCX" $ THEN $! $! Set the library to use UCX. $! $ TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_DECC.OPT/OPT" $ IF F$TRNLNM("UCX$IPC_SHR") .NES. "" $ THEN $ TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_DECC_LOG.OPT/OPT" $ ELSE $ IF COMPILER .NES. "DECC" .AND. ARCH .EQS. "VAX" THEN - TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_VAXC.OPT/OPT" $ ENDIF $! $! Done with UCX $! $ ENDIF $! $! Check to see if TCPIP was chosen $! $ IF P4.EQS."TCPIP" $ THEN $! $! Set the library to use TCPIP (post UCX). $! $ TCPIP_LIB = "SYS$DISK:[-.VMS]TCPIP_SHR_DECC.OPT/OPT" $! $! Done with TCPIP $! $ ENDIF $! $! Check to see if NONE was chosen $! $ IF P4.EQS."NONE" $ THEN $! $! Do not use a TCPIP library. $! $ TCPIP_LIB = "" $! $! Done with TCPIP $! $ ENDIF $! $! Print info $! $ WRITE SYS$OUTPUT "TCP/IP library spec: ", TCPIP_LIB $! $! Else The User Entered An Invalid Arguement. $! $ ELSE $! $! Tell The User We Don't Know What They Want. $! $ WRITE SYS$OUTPUT "" $ WRITE SYS$OUTPUT "The Option ",P4," Is Invalid. The Valid Options Are:" $ WRITE SYS$OUTPUT "" $ WRITE SYS$OUTPUT " SOCKETSHR : To link with SOCKETSHR TCP/IP library." $ WRITE SYS$OUTPUT " UCX : To link with UCX TCP/IP library." $ WRITE SYS$OUTPUT " TCPIP : To link with TCPIP (post UCX) TCP/IP library." $ WRITE SYS$OUTPUT "" $! $! Time To EXIT. $! $ EXIT $! $! Done with TCP/IP libraries $! $ ENDIF $! $! Check if the user wanted to compile just a subset of all the encryption $! methods. $! $ IF P6 .NES. "" $ THEN $ ENCRYPT_TYPES = P6 $ ENDIF $! $! Time To RETURN... $! $ RETURN $! $ INITIALISE: $! $! Save old value of the logical name OPENSSL $! $ __SAVE_OPENSSL = F$TRNLNM("OPENSSL","LNM$PROCESS_TABLE") $! $! Save directory information $! $ __HERE = F$PARSE(F$PARSE("A.;",F$ENVIRONMENT("PROCEDURE"))-"A.;","[]A.;") - "A.;" $ __HERE = F$EDIT(__HERE,"UPCASE") $ __TOP = __HERE - "CRYPTO]" $ __INCLUDE = __TOP + "INCLUDE.OPENSSL]" $! $! Set up the logical name OPENSSL to point at the include directory $! $ DEFINE OPENSSL/NOLOG '__INCLUDE' $! $! Done $! $ RETURN $! $ CLEANUP: $! $! Restore the logical name OPENSSL if it had a value $! $ IF __SAVE_OPENSSL .EQS. "" $ THEN $ DEASSIGN OPENSSL $ ELSE $ DEFINE/NOLOG OPENSSL '__SAVE_OPENSSL' $ ENDIF $! $! Done $! $ RETURN