123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277 |
- /* crypto/rc5/rc5speed.c */
- /* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- *
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to. The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code. The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- *
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- * must display the following acknowledgement:
- * "This product includes cryptographic software written by
- * Eric Young (eay@cryptsoft.com)"
- * The word 'cryptographic' can be left out if the rouines from the library
- * being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from
- * the apps directory (application code) you must include an acknowledgement:
- * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- *
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed. i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
- /* 11-Sep-92 Andrew Daviel Support for Silicon Graphics IRIX added */
- /* 06-Apr-92 Luke Brennan Support for VMS and add extra signal calls */
- #if !defined(OPENSSL_SYS_MSDOS) && (!defined(OPENSSL_SYS_VMS) || defined(__DECC)) && !defined(OPENSSL_SYS_MACOSX)
- #define TIMES
- #endif
- #include <stdio.h>
- #include <openssl/e_os2.h>
- #include OPENSSL_UNISTD_IO
- OPENSSL_DECLARE_EXIT
- #ifndef OPENSSL_SYS_NETWARE
- #include <signal.h>
- #endif
- #ifndef _IRIX
- #include <time.h>
- #endif
- #ifdef TIMES
- #include <sys/types.h>
- #include <sys/times.h>
- #endif
- /* Depending on the VMS version, the tms structure is perhaps defined.
- The __TMS macro will show if it was. If it wasn't defined, we should
- undefine TIMES, since that tells the rest of the program how things
- should be handled. -- Richard Levitte */
- #if defined(OPENSSL_SYS_VMS_DECC) && !defined(__TMS)
- #undef TIMES
- #endif
- #ifndef TIMES
- #include <sys/timeb.h>
- #endif
- #if defined(sun) || defined(__ultrix)
- #define _POSIX_SOURCE
- #include <limits.h>
- #include <sys/param.h>
- #endif
- #include <openssl/rc5.h>
- /* The following if from times(3) man page. It may need to be changed */
- #ifndef HZ
- #ifndef CLK_TCK
- #define HZ 100.0
- #else /* CLK_TCK */
- #define HZ ((double)CLK_TCK)
- #endif
- #endif
- #define BUFSIZE ((long)1024)
- long run=0;
- double Time_F(int s);
- #ifdef SIGALRM
- #if defined(__STDC__) || defined(sgi) || defined(_AIX)
- #define SIGRETTYPE void
- #else
- #define SIGRETTYPE int
- #endif
- SIGRETTYPE sig_done(int sig);
- SIGRETTYPE sig_done(int sig)
- {
- signal(SIGALRM,sig_done);
- run=0;
- #ifdef LINT
- sig=sig;
- #endif
- }
- #endif
- #define START 0
- #define STOP 1
- double Time_F(int s)
- {
- double ret;
- #ifdef TIMES
- static struct tms tstart,tend;
- if (s == START)
- {
- times(&tstart);
- return(0);
- }
- else
- {
- times(&tend);
- ret=((double)(tend.tms_utime-tstart.tms_utime))/HZ;
- return((ret == 0.0)?1e-6:ret);
- }
- #else /* !times() */
- static struct timeb tstart,tend;
- long i;
- if (s == START)
- {
- ftime(&tstart);
- return(0);
- }
- else
- {
- ftime(&tend);
- i=(long)tend.millitm-(long)tstart.millitm;
- ret=((double)(tend.time-tstart.time))+((double)i)/1e3;
- return((ret == 0.0)?1e-6:ret);
- }
- #endif
- }
- int main(int argc, char **argv)
- {
- long count;
- static unsigned char buf[BUFSIZE];
- static unsigned char key[] ={
- 0x12,0x34,0x56,0x78,0x9a,0xbc,0xde,0xf0,
- 0xfe,0xdc,0xba,0x98,0x76,0x54,0x32,0x10,
- };
- RC5_32_KEY sch;
- double a,b,c,d;
- #ifndef SIGALRM
- long ca,cb,cc;
- #endif
- #ifndef TIMES
- printf("To get the most accurate results, try to run this\n");
- printf("program when this computer is idle.\n");
- #endif
- #ifndef SIGALRM
- printf("First we calculate the approximate speed ...\n");
- RC5_32_set_key(&sch,16,key,12);
- count=10;
- do {
- long i;
- unsigned long data[2];
- count*=2;
- Time_F(START);
- for (i=count; i; i--)
- RC5_32_encrypt(data,&sch);
- d=Time_F(STOP);
- } while (d < 3.0);
- ca=count/512;
- cb=count;
- cc=count*8/BUFSIZE+1;
- printf("Doing RC5_32_set_key %ld times\n",ca);
- #define COND(d) (count != (d))
- #define COUNT(d) (d)
- #else
- #define COND(c) (run)
- #define COUNT(d) (count)
- signal(SIGALRM,sig_done);
- printf("Doing RC5_32_set_key for 10 seconds\n");
- alarm(10);
- #endif
- Time_F(START);
- for (count=0,run=1; COND(ca); count+=4)
- {
- RC5_32_set_key(&sch,16,key,12);
- RC5_32_set_key(&sch,16,key,12);
- RC5_32_set_key(&sch,16,key,12);
- RC5_32_set_key(&sch,16,key,12);
- }
- d=Time_F(STOP);
- printf("%ld RC5_32_set_key's in %.2f seconds\n",count,d);
- a=((double)COUNT(ca))/d;
- #ifdef SIGALRM
- printf("Doing RC5_32_encrypt's for 10 seconds\n");
- alarm(10);
- #else
- printf("Doing RC5_32_encrypt %ld times\n",cb);
- #endif
- Time_F(START);
- for (count=0,run=1; COND(cb); count+=4)
- {
- unsigned long data[2];
- RC5_32_encrypt(data,&sch);
- RC5_32_encrypt(data,&sch);
- RC5_32_encrypt(data,&sch);
- RC5_32_encrypt(data,&sch);
- }
- d=Time_F(STOP);
- printf("%ld RC5_32_encrypt's in %.2f second\n",count,d);
- b=((double)COUNT(cb)*8)/d;
- #ifdef SIGALRM
- printf("Doing RC5_32_cbc_encrypt on %ld byte blocks for 10 seconds\n",
- BUFSIZE);
- alarm(10);
- #else
- printf("Doing RC5_32_cbc_encrypt %ld times on %ld byte blocks\n",cc,
- BUFSIZE);
- #endif
- Time_F(START);
- for (count=0,run=1; COND(cc); count++)
- RC5_32_cbc_encrypt(buf,buf,BUFSIZE,&sch,
- &(key[0]),RC5_ENCRYPT);
- d=Time_F(STOP);
- printf("%ld RC5_32_cbc_encrypt's of %ld byte blocks in %.2f second\n",
- count,BUFSIZE,d);
- c=((double)COUNT(cc)*BUFSIZE)/d;
- printf("RC5_32/12/16 set_key per sec = %12.2f (%9.3fuS)\n",a,1.0e6/a);
- printf("RC5_32/12/16 raw ecb bytes per sec = %12.2f (%9.3fuS)\n",b,8.0e6/b);
- printf("RC5_32/12/16 cbc bytes per sec = %12.2f (%9.3fuS)\n",c,8.0e6/c);
- exit(0);
- #if defined(LINT) || defined(OPENSSL_SYS_MSDOS)
- return(0);
- #endif
- }
|