openssl/include/internal/quic_demux.h

/*
 * Copyright 2022-2024 The OpenSSL Project Authors. All Rights Reserved.
 *
 * Licensed under the Apache License 2.0 (the "License").  You may not use
 * this file except in compliance with the License.  You can obtain a copy
 * in the file LICENSE in the source distribution or at
 * https://www.openssl.org/source/license.html
 */

#ifndef OSSL_QUIC_DEMUX_H
# define OSSL_QUIC_DEMUX_H

# include <openssl/ssl.h>
# include "internal/quic_types.h"
# include "internal/quic_predef.h"
# include "internal/bio_addr.h"
# include "internal/time.h"
# include "internal/list.h"

# ifndef OPENSSL_NO_QUIC

/*
 * QUIC Demuxer
 * ============
 *
 * The QUIC connection demuxer is the entity responsible for receiving datagrams
 * from the network via a datagram BIO. It parses the headers of the first
 * packet in the datagram to determine that packet's DCID and hands off
 * processing of the entire datagram to a single callback function which can
 * decide how to handle and route the datagram, for example by looking up
 * a QRX instance and injecting the URXE into that QRX.
 *
 * A QRX will typically be instantiated per QUIC connection and contains the
 * cryptographic resources needed to decrypt QUIC packets for that connection.
 * However, it is up to the callback function to handle routing, for example by
 * consulting a LCIDM instance. Thus the demuxer has no specific knowledge of
 * any QRX and is not coupled to it. All CID knowledge is also externalised into
 * a LCIDM or other CID state tracking object, without the DEMUX being coupled
 * to any particular DCID resolution mechanism.
 *
 * URX Queue
 * ---------
 *
 * Since the demuxer must handle the initial reception of datagrams from the OS,
 * RX queue management for new, unprocessed datagrams is also handled by the
 * demuxer.
 *
 * The demuxer maintains a queue of Unprocessed RX Entries (URXEs), which store
 * unprocessed (i.e., encrypted, unvalidated) data received from the network.
 * The URXE queue is designed to allow multiple datagrams to be received in a
 * single call to BIO_recvmmsg, where supported.
 *
 * One URXE is used per received datagram. Each datagram may contain multiple
 * packets, however, this is not the demuxer's concern. QUIC prohibits different
 * packets in the same datagram from containing different DCIDs; the demuxer
 * only considers the DCID of the first packet in a datagram when deciding how
 * to route a received datagram, and it is the responsibility of the QRX to
 * enforce this rule. Packets other than the first packet in a datagram are not
 * examined by the demuxer, and the demuxer does not perform validation of
 * packet headers other than to the minimum extent necessary to extract the
 * DCID; further parsing and validation of packet headers is the responsibility
 * of the QRX.
 *
 * Rather than defining an opaque interface, the URXE structure internals
 * are exposed. Since the demuxer is only exposed to other parts of the QUIC
 * implementation internals, this poses no problem, and has a number of
 * advantages:
 *
 *   - Fields in the URXE can be allocated to support requirements in other
 *     components, like the QRX, which would otherwise have to allocate extra
 *     memory corresponding to each URXE.
 *
 *   - Other components, like the QRX, can keep the URXE in queues of its own
 *     when it is not being managed by the demuxer.
 *
 * URX Queue Structure
 * -------------------
 *
 * The URXE queue is maintained as a simple doubly-linked list. URXE entries are
 * moved between different lists in their lifecycle (for example, from a free
 * list to a pending list and vice versa). The buffer into which datagrams are
 * received immediately follows this URXE header structure and is part of the
 * same allocation.
 */

/* Maximum number of packets we allow to exist in one datagram. */
#define QUIC_MAX_PKT_PER_URXE       (sizeof(uint64_t) * 8)

struct quic_urxe_st {
    OSSL_LIST_MEMBER(urxe, QUIC_URXE);

    /*
     * The URXE data starts after this structure so we don't need a pointer.
     * data_len stores the current length (i.e., the length of the received
     * datagram) and alloc_len stores the allocation length. The URXE will be
     * reallocated if we need a larger allocation than is available, though this
     * should not be common as we will have a good idea of worst-case MTUs up
     * front.
     */
    size_t          data_len, alloc_len;

    /*
     * Bitfields per packet. processed indicates the packet has been processed
     * and must not be processed again, hpr_removed indicates header protection
     * has already been removed. Used by QRX only; not used by the demuxer.
     */
    uint64_t        processed, hpr_removed;

    /*
     * This monotonically increases with each datagram received. It is used for
     * diagnostic purposes only.
     */
    uint64_t        datagram_id;

    /*
     * Address of peer we received the datagram from, and the local interface
     * address we received it on. If local address support is not enabled, local
     * is zeroed.
     */
    BIO_ADDR        peer, local;

    /*
     * Time at which datagram was received (or ossl_time_zero()) if a now
     * function was not provided).
     */
    OSSL_TIME       time;

    /*
     * Used by the QRX to mark whether a datagram has been deferred. Used by the
     * QRX only; not used by the demuxer.
     */
    char            deferred;

    /*
     * Used by the DEMUX to track if a URXE has been handed out. Used primarily
     * for debugging purposes.
     */
    char            demux_state;
};

/* Accessors for URXE buffer. */
static ossl_unused ossl_inline unsigned char *
ossl_quic_urxe_data(const QUIC_URXE *e)
{
    return (unsigned char *)&e[1];
}

static ossl_unused ossl_inline unsigned char *
ossl_quic_urxe_data_end(const QUIC_URXE *e)
{
    return ossl_quic_urxe_data(e) + e->data_len;
}

/* List structure tracking a queue of URXEs. */
DEFINE_LIST_OF(urxe, QUIC_URXE);
typedef OSSL_LIST(urxe) QUIC_URXE_LIST;

/*
 * List management helpers. These are used by the demuxer but can also be used
 * by users of the demuxer to manage URXEs.
 */
void ossl_quic_urxe_remove(QUIC_URXE_LIST *l, QUIC_URXE *e);
void ossl_quic_urxe_insert_head(QUIC_URXE_LIST *l, QUIC_URXE *e);
void ossl_quic_urxe_insert_tail(QUIC_URXE_LIST *l, QUIC_URXE *e);

/*
 * Called when a datagram is received for a given connection ID.
 *
 * e is a URXE containing the datagram payload. It is permissible for the callee
 * to mutate this buffer; once the demuxer calls this callback, it will never
 * read the buffer again.
 *
 * If a DCID was identified for the datagram, dcid is non-NULL; otherwise
 * it is NULL.
 *
 * The callee must arrange for ossl_quic_demux_release_urxe or
 * ossl_quic_demux_reinject_urxe to be called on the URXE at some point in the
 * future (this need not be before the callback returns).
 *
 * At the time the callback is made, the URXE will not be in any queue,
 * therefore the callee can use the prev and next fields as it wishes.
 */
typedef void (ossl_quic_demux_cb_fn)(QUIC_URXE *e, void *arg,
                                     const QUIC_CONN_ID *dcid);

/*
 * Creates a new demuxer. The given BIO is used to receive datagrams from the
 * network using BIO_recvmmsg. short_conn_id_len is the length of destination
 * connection IDs used in RX'd packets; it must have the same value for all
 * connections used on a socket. default_urxe_alloc_len is the buffer size to
 * receive datagrams into; it should be a value large enough to contain any
 * received datagram according to local MTUs, etc.
 *
 * now is an optional function used to determine the time a datagram was
 * received. now_arg is an opaque argument passed to the function. If now is
 * NULL, ossl_time_zero() is used as the datagram reception time.
 */
QUIC_DEMUX *ossl_quic_demux_new(BIO *net_bio,
                                size_t short_conn_id_len,
                                OSSL_TIME (*now)(void *arg),
                                void *now_arg);

/*
 * Destroy a demuxer. All URXEs must have been released back to the demuxer
 * before calling this. No-op if demux is NULL.
 */
void ossl_quic_demux_free(QUIC_DEMUX *demux);

/*
 * Changes the BIO which the demuxer reads from. This also sets the MTU if the
 * BIO supports querying the MTU.
 */
void ossl_quic_demux_set_bio(QUIC_DEMUX *demux, BIO *net_bio);

/*
 * Changes the MTU in bytes we use to receive datagrams.
 */
int ossl_quic_demux_set_mtu(QUIC_DEMUX *demux, unsigned int mtu);

/*
 * Set the default packet handler. This is used for incoming packets which don't
 * match a registered DCID. This is only needed for servers. If a default packet
 * handler is not set, a packet which doesn't match a registered DCID is
 * silently dropped. A default packet handler may be unset by passing NULL.
 *
 * The handler is responsible for ensuring that ossl_quic_demux_reinject_urxe or
 * ossl_quic_demux_release_urxe is called on the passed packet at some point in
 * the future, which may or may not be before the handler returns.
 */
void ossl_quic_demux_set_default_handler(QUIC_DEMUX *demux,
                                         ossl_quic_demux_cb_fn *cb,
                                         void *cb_arg);

/*
 * Releases a URXE back to the demuxer. No reference must be made to the URXE or
 * its buffer after calling this function. The URXE must not be in any queue;
 * that is, its prev and next pointers must be NULL.
 */
void ossl_quic_demux_release_urxe(QUIC_DEMUX *demux,
                                  QUIC_URXE *e);

/*
 * Reinjects a URXE which was issued to a registered DCID callback or the
 * default packet handler callback back into the pending queue. This is useful
 * when a packet has been handled by the default packet handler callback such
 * that a DCID has now been registered and can be dispatched normally by DCID.
 * Once this has been called, the caller must not touch the URXE anymore and
 * must not also call ossl_quic_demux_release_urxe().
 *
 * The URXE is reinjected at the head of the queue, so it will be reprocessed
 * immediately.
 */
void ossl_quic_demux_reinject_urxe(QUIC_DEMUX *demux,
                                   QUIC_URXE *e);

/*
 * Process any unprocessed RX'd datagrams, by calling registered callbacks by
 * connection ID, reading more datagrams from the BIO if necessary.
 *
 * Returns one of the following values:
 *
 *     QUIC_DEMUX_PUMP_RES_OK
 *         At least one incoming datagram was processed.
 *
 *     QUIC_DEMUX_PUMP_RES_TRANSIENT_FAIL
 *         No more incoming datagrams are currently available.
 *         Call again later.
 *
 *     QUIC_DEMUX_PUMP_RES_PERMANENT_FAIL
 *         Either the network read BIO has failed in a non-transient fashion, or
 *         the QUIC implementation has encountered an internal state, assertion
 *         or allocation error. The caller should tear down the connection
 *         similarly to in the case of a protocol violation.
 *
 */
#define QUIC_DEMUX_PUMP_RES_OK              1
#define QUIC_DEMUX_PUMP_RES_TRANSIENT_FAIL  (-1)
#define QUIC_DEMUX_PUMP_RES_PERMANENT_FAIL  (-2)

int ossl_quic_demux_pump(QUIC_DEMUX *demux);

/*
 * Artificially inject a packet into the demuxer for testing purposes. The
 * buffer must not exceed the URXE size being used by the demuxer.
 *
 * If peer or local are NULL, their respective fields are zeroed in the injected
 * URXE.
 *
 * Returns 1 on success or 0 on failure.
 */
int ossl_quic_demux_inject(QUIC_DEMUX *demux,
                           const unsigned char *buf,
                           size_t buf_len,
                           const BIO_ADDR *peer,
                           const BIO_ADDR *local);

/*
 * Returns 1 if there are any pending URXEs.
 */
int ossl_quic_demux_has_pending(const QUIC_DEMUX *demux);

# endif

#endif