rsautl.c 9.5 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333
  1. /* rsautl.c */
  2. /* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
  3. * project 2000.
  4. */
  5. /* ====================================================================
  6. * Copyright (c) 2000 The OpenSSL Project. All rights reserved.
  7. *
  8. * Redistribution and use in source and binary forms, with or without
  9. * modification, are permitted provided that the following conditions
  10. * are met:
  11. *
  12. * 1. Redistributions of source code must retain the above copyright
  13. * notice, this list of conditions and the following disclaimer.
  14. *
  15. * 2. Redistributions in binary form must reproduce the above copyright
  16. * notice, this list of conditions and the following disclaimer in
  17. * the documentation and/or other materials provided with the
  18. * distribution.
  19. *
  20. * 3. All advertising materials mentioning features or use of this
  21. * software must display the following acknowledgment:
  22. * "This product includes software developed by the OpenSSL Project
  23. * for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
  24. *
  25. * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
  26. * endorse or promote products derived from this software without
  27. * prior written permission. For written permission, please contact
  28. * licensing@OpenSSL.org.
  29. *
  30. * 5. Products derived from this software may not be called "OpenSSL"
  31. * nor may "OpenSSL" appear in their names without prior written
  32. * permission of the OpenSSL Project.
  33. *
  34. * 6. Redistributions of any form whatsoever must retain the following
  35. * acknowledgment:
  36. * "This product includes software developed by the OpenSSL Project
  37. * for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
  38. *
  39. * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
  40. * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  41. * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
  42. * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR
  43. * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
  44. * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  45. * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
  46. * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  47. * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  48. * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  49. * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
  50. * OF THE POSSIBILITY OF SUCH DAMAGE.
  51. * ====================================================================
  52. *
  53. * This product includes cryptographic software written by Eric Young
  54. * (eay@cryptsoft.com). This product includes software written by Tim
  55. * Hudson (tjh@cryptsoft.com).
  56. *
  57. */
  58. #include <openssl/opensslconf.h>
  59. #ifndef OPENSSL_NO_RSA
  60. #include "apps.h"
  61. #include <string.h>
  62. #include <openssl/err.h>
  63. #include <openssl/pem.h>
  64. #include <openssl/rsa.h>
  65. #define RSA_SIGN 1
  66. #define RSA_VERIFY 2
  67. #define RSA_ENCRYPT 3
  68. #define RSA_DECRYPT 4
  69. #define KEY_PRIVKEY 1
  70. #define KEY_PUBKEY 2
  71. #define KEY_CERT 3
  72. static void usage(void);
  73. #undef PROG
  74. #define PROG rsautl_main
  75. int MAIN(int argc, char **);
  76. int MAIN(int argc, char **argv)
  77. {
  78. ENGINE *e = NULL;
  79. BIO *in = NULL, *out = NULL;
  80. char *infile = NULL, *outfile = NULL;
  81. #ifndef OPENSSL_NO_ENGINE
  82. char *engine = NULL;
  83. #endif
  84. char *keyfile = NULL;
  85. char rsa_mode = RSA_VERIFY, key_type = KEY_PRIVKEY;
  86. int keyform = FORMAT_PEM;
  87. char need_priv = 0, badarg = 0, rev = 0;
  88. char hexdump = 0, asn1parse = 0;
  89. X509 *x;
  90. EVP_PKEY *pkey = NULL;
  91. RSA *rsa = NULL;
  92. unsigned char *rsa_in = NULL, *rsa_out = NULL, pad;
  93. char *passargin = NULL, *passin = NULL;
  94. int rsa_inlen, rsa_outlen = 0;
  95. int keysize;
  96. int ret = 1;
  97. argc--;
  98. argv++;
  99. if(!bio_err) bio_err = BIO_new_fp(stderr, BIO_NOCLOSE);
  100. if (!load_config(bio_err, NULL))
  101. goto end;
  102. ERR_load_crypto_strings();
  103. OpenSSL_add_all_algorithms();
  104. pad = RSA_PKCS1_PADDING;
  105. while(argc >= 1)
  106. {
  107. if (!strcmp(*argv,"-in")) {
  108. if (--argc < 1) badarg = 1;
  109. infile= *(++argv);
  110. } else if (!strcmp(*argv,"-out")) {
  111. if (--argc < 1) badarg = 1;
  112. outfile= *(++argv);
  113. } else if(!strcmp(*argv, "-inkey")) {
  114. if (--argc < 1) badarg = 1;
  115. keyfile = *(++argv);
  116. } else if (!strcmp(*argv,"-passin")) {
  117. if (--argc < 1) badarg = 1;
  118. passargin= *(++argv);
  119. } else if (strcmp(*argv,"-keyform") == 0) {
  120. if (--argc < 1) badarg = 1;
  121. keyform=str2fmt(*(++argv));
  122. #ifndef OPENSSL_NO_ENGINE
  123. } else if(!strcmp(*argv, "-engine")) {
  124. if (--argc < 1) badarg = 1;
  125. engine = *(++argv);
  126. #endif
  127. } else if(!strcmp(*argv, "-pubin")) {
  128. key_type = KEY_PUBKEY;
  129. } else if(!strcmp(*argv, "-certin")) {
  130. key_type = KEY_CERT;
  131. }
  132. else if(!strcmp(*argv, "-asn1parse")) asn1parse = 1;
  133. else if(!strcmp(*argv, "-hexdump")) hexdump = 1;
  134. else if(!strcmp(*argv, "-raw")) pad = RSA_NO_PADDING;
  135. else if(!strcmp(*argv, "-oaep")) pad = RSA_PKCS1_OAEP_PADDING;
  136. else if(!strcmp(*argv, "-ssl")) pad = RSA_SSLV23_PADDING;
  137. else if(!strcmp(*argv, "-pkcs")) pad = RSA_PKCS1_PADDING;
  138. else if(!strcmp(*argv, "-x931")) pad = RSA_X931_PADDING;
  139. else if(!strcmp(*argv, "-sign")) {
  140. rsa_mode = RSA_SIGN;
  141. need_priv = 1;
  142. } else if(!strcmp(*argv, "-verify")) rsa_mode = RSA_VERIFY;
  143. else if(!strcmp(*argv, "-rev")) rev = 1;
  144. else if(!strcmp(*argv, "-encrypt")) rsa_mode = RSA_ENCRYPT;
  145. else if(!strcmp(*argv, "-decrypt")) {
  146. rsa_mode = RSA_DECRYPT;
  147. need_priv = 1;
  148. } else badarg = 1;
  149. if(badarg) {
  150. usage();
  151. goto end;
  152. }
  153. argc--;
  154. argv++;
  155. }
  156. if(need_priv && (key_type != KEY_PRIVKEY)) {
  157. BIO_printf(bio_err, "A private key is needed for this operation\n");
  158. goto end;
  159. }
  160. #ifndef OPENSSL_NO_ENGINE
  161. e = setup_engine(bio_err, engine, 0);
  162. #endif
  163. if(!app_passwd(bio_err, passargin, NULL, &passin, NULL)) {
  164. BIO_printf(bio_err, "Error getting password\n");
  165. goto end;
  166. }
  167. /* FIXME: seed PRNG only if needed */
  168. app_RAND_load_file(NULL, bio_err, 0);
  169. switch(key_type) {
  170. case KEY_PRIVKEY:
  171. pkey = load_key(bio_err, keyfile, keyform, 0,
  172. passin, e, "Private Key");
  173. break;
  174. case KEY_PUBKEY:
  175. pkey = load_pubkey(bio_err, keyfile, keyform, 0,
  176. NULL, e, "Public Key");
  177. break;
  178. case KEY_CERT:
  179. x = load_cert(bio_err, keyfile, keyform,
  180. NULL, e, "Certificate");
  181. if(x) {
  182. pkey = X509_get_pubkey(x);
  183. X509_free(x);
  184. }
  185. break;
  186. }
  187. if(!pkey) {
  188. return 1;
  189. }
  190. rsa = EVP_PKEY_get1_RSA(pkey);
  191. EVP_PKEY_free(pkey);
  192. if(!rsa) {
  193. BIO_printf(bio_err, "Error getting RSA key\n");
  194. ERR_print_errors(bio_err);
  195. goto end;
  196. }
  197. if(infile) {
  198. if(!(in = BIO_new_file(infile, "rb"))) {
  199. BIO_printf(bio_err, "Error Reading Input File\n");
  200. ERR_print_errors(bio_err);
  201. goto end;
  202. }
  203. } else in = BIO_new_fp(stdin, BIO_NOCLOSE);
  204. if(outfile) {
  205. if(!(out = BIO_new_file(outfile, "wb"))) {
  206. BIO_printf(bio_err, "Error Reading Output File\n");
  207. ERR_print_errors(bio_err);
  208. goto end;
  209. }
  210. } else {
  211. out = BIO_new_fp(stdout, BIO_NOCLOSE);
  212. #ifdef OPENSSL_SYS_VMS
  213. {
  214. BIO *tmpbio = BIO_new(BIO_f_linebuffer());
  215. out = BIO_push(tmpbio, out);
  216. }
  217. #endif
  218. }
  219. keysize = RSA_size(rsa);
  220. rsa_in = OPENSSL_malloc(keysize * 2);
  221. rsa_out = OPENSSL_malloc(keysize);
  222. /* Read the input data */
  223. rsa_inlen = BIO_read(in, rsa_in, keysize * 2);
  224. if(rsa_inlen <= 0) {
  225. BIO_printf(bio_err, "Error reading input Data\n");
  226. exit(1);
  227. }
  228. if(rev) {
  229. int i;
  230. unsigned char ctmp;
  231. for(i = 0; i < rsa_inlen/2; i++) {
  232. ctmp = rsa_in[i];
  233. rsa_in[i] = rsa_in[rsa_inlen - 1 - i];
  234. rsa_in[rsa_inlen - 1 - i] = ctmp;
  235. }
  236. }
  237. switch(rsa_mode) {
  238. case RSA_VERIFY:
  239. rsa_outlen = RSA_public_decrypt(rsa_inlen, rsa_in, rsa_out, rsa, pad);
  240. break;
  241. case RSA_SIGN:
  242. rsa_outlen = RSA_private_encrypt(rsa_inlen, rsa_in, rsa_out, rsa, pad);
  243. break;
  244. case RSA_ENCRYPT:
  245. rsa_outlen = RSA_public_encrypt(rsa_inlen, rsa_in, rsa_out, rsa, pad);
  246. break;
  247. case RSA_DECRYPT:
  248. rsa_outlen = RSA_private_decrypt(rsa_inlen, rsa_in, rsa_out, rsa, pad);
  249. break;
  250. }
  251. if(rsa_outlen <= 0) {
  252. BIO_printf(bio_err, "RSA operation error\n");
  253. ERR_print_errors(bio_err);
  254. goto end;
  255. }
  256. ret = 0;
  257. if(asn1parse) {
  258. if(!ASN1_parse_dump(out, rsa_out, rsa_outlen, 1, -1)) {
  259. ERR_print_errors(bio_err);
  260. }
  261. } else if(hexdump) BIO_dump(out, (char *)rsa_out, rsa_outlen);
  262. else BIO_write(out, rsa_out, rsa_outlen);
  263. end:
  264. RSA_free(rsa);
  265. BIO_free(in);
  266. BIO_free_all(out);
  267. if(rsa_in) OPENSSL_free(rsa_in);
  268. if(rsa_out) OPENSSL_free(rsa_out);
  269. if(passin) OPENSSL_free(passin);
  270. return ret;
  271. }
  272. static void usage()
  273. {
  274. BIO_printf(bio_err, "Usage: rsautl [options]\n");
  275. BIO_printf(bio_err, "-in file input file\n");
  276. BIO_printf(bio_err, "-out file output file\n");
  277. BIO_printf(bio_err, "-inkey file input key\n");
  278. BIO_printf(bio_err, "-keyform arg private key format - default PEM\n");
  279. BIO_printf(bio_err, "-pubin input is an RSA public\n");
  280. BIO_printf(bio_err, "-certin input is a certificate carrying an RSA public key\n");
  281. BIO_printf(bio_err, "-ssl use SSL v2 padding\n");
  282. BIO_printf(bio_err, "-raw use no padding\n");
  283. BIO_printf(bio_err, "-pkcs use PKCS#1 v1.5 padding (default)\n");
  284. BIO_printf(bio_err, "-oaep use PKCS#1 OAEP\n");
  285. BIO_printf(bio_err, "-sign sign with private key\n");
  286. BIO_printf(bio_err, "-verify verify with public key\n");
  287. BIO_printf(bio_err, "-encrypt encrypt with public key\n");
  288. BIO_printf(bio_err, "-decrypt decrypt with private key\n");
  289. BIO_printf(bio_err, "-hexdump hex dump output\n");
  290. #ifndef OPENSSL_NO_ENGINE
  291. BIO_printf(bio_err, "-engine e use engine e, possibly a hardware device.\n");
  292. BIO_printf (bio_err, "-passin arg pass phrase source\n");
  293. #endif
  294. }
  295. #endif