2
0

connection-id-cache.md 9.7 KB

QUIC Connection ID Cache

The connection ID cache is responsible for managing connection IDs, both local and remote.

Remote Connection IDs

For remote connection IDs, we need to be able to:

  • add new IDs per connection;
  • pick a non-retired ID associated from those available for a connection and
  • select a connection ID by sequence number and retire that and all older IDs.

The cache will be implemented as a double ended queue as part of the QUIC_CONNECTION object. The queue will be sorted by sequence number and must maintain a count of the number of connection IDs present. There is no requirement to maintain a global mapping since remote IDs are only used when sending packets, not receiving them.

In MVP, a many-to-1 matching of Connection IDs per Connection object is required. Refer third paragraph in 5.1.

When picking a non-retired connection ID for MVP, the youngest available will be chosen.

Local Connection IDs

For local connection IDs, we need to be able to:

  • generate a new connection ID and associate it with a connection;
  • query if a connection ID is present;
  • for a server, map a connection ID to a QUIC_CONNECTION;
  • drop all connection IDs associated with a QUIC_CONNECTION;
  • select a connection ID by sequence number and retire that and all older IDs and
  • select a connection ID by sequence number and drop that and all older IDs.

All connection IDs issued by our stack must be the same length because short form packets include the connection ID but no length byte. Random connection IDs of this length will be allocated. Note that no additional information will be contained in the connection ID.

There will be one global set of local connection IDs, QUIC_ROUTE_TABLE, which is shared by all connections over all SSL_CTX objects. This is used to dispatch incoming datagrams to their correct destination and will be implemented as a dictionary.

Notes

  • For MVP, it would be sufficient to only use a zero length connection ID.
  • For MVP, a connection ID to QUIC_CONNECTION mapping need not be implemented.
  • Post MVP, funnelling all received packets through a single socket is likely to be bottleneck. An alternative would be receiving from pairs.
  • For MVP, the local connection ID cache need only have one element. I.e. there is no requirement to implement any form of lookup.
  • Routes

    A pair of connection IDs identify a route between the two ends of the communication. This contains the connection IDs of both ends of the connection and the common sequence number. We need to be able to:

    • select a connection ID by sequence number and retire that and all older IDs and
    • select a connection ID by sequence number and drop that and all older IDs.

    It is likely that operations on local and remote connection IDs can be subsumed by the route functionality.

    ID Retirement

    Connection IDs are retired by either a NEW_CONNECTION_ID or a RETIRE_CONNECTION_ID frame and this is acknowledged by a RETIRE_CONNECTION_ID or a NEW_CONNECTION_ID frame respectively.

    When a retirement frame is received, we can immediately remove the IDs covered from our cache and then send back an acknowledgement of the retirement.

    If we want to retire a frame, we send a retirement frame and mark the IDs covered in our cache as retired. This means that we cannot send using any of these IDs but can still receive using them. Once our peer acknowledges the retirement, we can remove the IDs.

    It is possible to receive out of order packets after receiving a retirement notification. It's unclear what to do with these, however dropping them seems reasonable. The alternative would be to maintain the route in a deletable state until all packets in flight at the time of retirement have been acked.

    API

    QUIC connection IDs are defined in #18949 but some extra functions are available:

    /* QUIC connection ID representation. */
    #define QUIC_MAX_CONN_ID_LEN   20
    
    typedef struct quic_conn_id_st {
        unsigned char id_len;
        unsigned char id[QUIC_MAX_CONN_ID_LEN];
    #if 0
        /* likely required later, although this might not be the ideal location */
        unsigned char reset_token[16];  /* stateless reset token is per conn ID */
    #endif
    } QUIC_CONN_ID;
    
    static ossl_unused ossl_inline int ossl_quic_conn_id_eq(const QUIC_CONN_ID *a,
                                                            const QUIC_CONN_ID *b);
    
    /* New functions */
    int ossl_quic_conn_id_set(QUIC_CONN_ID *cid, unsigned char *id,
                              unsigned int id_len);
    
    int ossl_quic_conn_id_generate(QUIC_CONN_ID *cid);
    

    Remote Connection ID APIs

    typedef struct quic_remote_conn_id_cache_st QUIC_REMOTE_CONN_ID_CACHE;
    
    /*
     * Allocate and free a remote connection ID cache
     */
    QUIC_REMOTE_CONN_ID_CACHE *ossl_quic_remote_conn_id_cache_new(
            size_t id_limit   /* [active_connection_id_limit] */
        );
    void ossl_quic_remote_conn_id_cache_free(QUIC_REMOTE_CONN_ID_CACHE *cache);
    
    /*
     * Add a remote connection ID to the cache
     */
    int ossl_quic_remote_conn_id_cache_add(QUIC_REMOTE_CONN_ID_CACHE *cache,
                                           const QUIC_CONNECTION *conn,
                                           const unsigned char *conn_id,
                                           size_t conn_id_len,
                                           uint64_t seq_no);
    
    /*
     * Query a remote connection for a connection ID.
     * Each connection can have multiple connection IDs associated with different
     * routes.  This function returns one of these in a non-specified manner.
     */
    int ossl_quic_remote_conn_id_cache_get0_conn_id(
            const QUIC_REMOTE_CONN_ID_CACHE *cache,
            const QUIC_CONNECTION *conn, QUIC_CONN_ID **cid);
    
    /*
     * Retire remote connection IDs up to and including the one determined by the
     * sequence number.
     */
    int ossl_quic_remote_conn_id_cache_retire(
            QUIC_REMOTE_CONN_ID_CACHE *cache, uint64_t seq_no);
    
    /*
     * Remove remote connection IDs up to and including the one determined by the
     * sequence number.
     */
    int ossl_quic_remote_conn_id_cache_remove(
            QUIC_REMOTE_CONN_ID_CACHE *cache, uint64_t seq_no);
    

    Local Connection ID APIs

    typedef struct quic_local_conn_id_cache_st QUIC_LOCAL_CONN_ID_CACHE;
    
    /*
     * Allocate and free a local connection ID cache
     */
    QUIC_LOCAL_CONN_ID_CACHE *ossl_quic_local_conn_id_cache_new(void);
    void ossl_quic_local_conn_id_cache_free(QUIC_LOCAL_CONN_ID_CACHE *cache);
    
    /*
     * Generate a new random local connection ID and associate it with a connection.
     * For MVP this could just be a zero length ID.
     */
    int ossl_quic_local_conn_id_cache_new_conn_id(QUIC_LOCAL_CONN_ID_CACHE *cache,
                                                  QUIC_CONNECTION *conn,
                                                  QUIC_CONN_ID **cid);
    
    /*
     * Remove a local connection and all associated cached IDs
     */
    int ossl_quic_local_conn_id_cache_remove_conn(QUIC_LOCAL_CONN_ID_CACHE *cache,
                                                  const QUIC_CONNECTION *conn);
    
    /*
     * Lookup a local connection by ID.
     * Returns the connection or NULL if absent.
     */
    QUIC_CONNECTION *ossl_quic_local_conn_id_cache_get0_conn(
            const QUIC_LOCAL_CONN_ID_CACHE *cache,
            const unsigned char *conn_id, size_t conn_id_len);
    
    /*
     * Retire local connection IDs up to and including the one specified by the
     * sequence number.
     */
    int ossl_quic_local_conn_id_cache_retire(
            QUIC_LOCAL_CONN_ID_CACHE *cache, uint64_t from_seq_no);
    
    /*
     * Remove local connection IDs up to and including the one specified by the
     * sequence number.
     */
    int ossl_quic_local_conn_id_cache_remove(
            QUIC_LOCAL_CONN_ID_CACHE *cache, uint64_t from_seq_no);
    

    Routes

    Additional status and source information is also included.

    typedef struct quic_route_st QUIC_ROUTE;
    typedef struct quic_route_table QUIC_ROUTE_TABLE;
    
    struct quic_route_st {
        QUIC_CONNECTION *conn;
        QUIC_CONN_ID     local;
        QUIC_CONN_ID     remote;
        uint64_t         seq_no;        /* Sequence number for both ends */
        unsigned int     retired : 1;   /* Connection ID has been retired */
    #if 0
        /* Later will require */
        BIO_ADDR         remote_address;/* remote source address */
    #endif
    };
    
    QUIC_ROUTE_TABLE *ossl_quic_route_table_new(void);
    void ossl_quic_route_table_free(QUIC_ROUTE_TABLE *routes);
    

    Add route to route table

    int ossl_route_table_add_route(QUIC_ROUTE_TABLE *cache,
                                   QUIC_ROUTE_TABLE *route);
    

    Route query

    /*
     * Query a route table entry by either local or remote ID
     */
    QUIC_ROUTE *ossl_route_table_get0_route_from_local(
            const QUIC_ROUTE_TABLE *cache,
            const unsigned char *conn_id, size_t conn_id_len);
    QUIC_ROUTE *ossl_route_table_get0_route_from_remote(
            const QUIC_ROUTE_TABLE *cache,
            const unsigned char *conn_id, size_t conn_id_len);
    

    Route retirement

    /*
     * Retire by sequence number up to and including the one specified.
     */
    int ossl_quic_route_table_retire(QUIC_ROUTE_TABLE *routes,
                                     QUIC_CONNECTION *conn,
                                     uint64_t seq_no);
    
    /*
     * Delete by sequence number up to and including the one specified.
     */
    int ossl_quic_route_table_remove(QUIC_ROUTE_TABLE *routes,
                                     QUIC_CONNECTION *conn,
                                     uint64_t seq_no);