123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625 |
- /* crypto/md32_common.h */
- /* ====================================================================
- * Copyright (c) 1999-2002 The OpenSSL Project. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- * software must display the following acknowledgment:
- * "This product includes software developed by the OpenSSL Project
- * for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- * endorse or promote products derived from this software without
- * prior written permission. For written permission, please contact
- * licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- * nor may "OpenSSL" appear in their names without prior written
- * permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- * acknowledgment:
- * "This product includes software developed by the OpenSSL Project
- * for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com). This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
- /*
- * This is a generic 32 bit "collector" for message digest algorithms.
- * Whenever needed it collects input character stream into chunks of
- * 32 bit values and invokes a block function that performs actual hash
- * calculations.
- *
- * Porting guide.
- *
- * Obligatory macros:
- *
- * DATA_ORDER_IS_BIG_ENDIAN or DATA_ORDER_IS_LITTLE_ENDIAN
- * this macro defines byte order of input stream.
- * HASH_CBLOCK
- * size of a unit chunk HASH_BLOCK operates on.
- * HASH_LONG
- * has to be at lest 32 bit wide, if it's wider, then
- * HASH_LONG_LOG2 *has to* be defined along
- * HASH_CTX
- * context structure that at least contains following
- * members:
- * typedef struct {
- * ...
- * HASH_LONG Nl,Nh;
- * HASH_LONG data[HASH_LBLOCK];
- * unsigned int num;
- * ...
- * } HASH_CTX;
- * HASH_UPDATE
- * name of "Update" function, implemented here.
- * HASH_TRANSFORM
- * name of "Transform" function, implemented here.
- * HASH_FINAL
- * name of "Final" function, implemented here.
- * HASH_BLOCK_HOST_ORDER
- * name of "block" function treating *aligned* input message
- * in host byte order, implemented externally.
- * HASH_BLOCK_DATA_ORDER
- * name of "block" function treating *unaligned* input message
- * in original (data) byte order, implemented externally (it
- * actually is optional if data and host are of the same
- * "endianess").
- * HASH_MAKE_STRING
- * macro convering context variables to an ASCII hash string.
- *
- * Optional macros:
- *
- * B_ENDIAN or L_ENDIAN
- * defines host byte-order.
- * HASH_LONG_LOG2
- * defaults to 2 if not states otherwise.
- * HASH_LBLOCK
- * assumed to be HASH_CBLOCK/4 if not stated otherwise.
- * HASH_BLOCK_DATA_ORDER_ALIGNED
- * alternative "block" function capable of treating
- * aligned input message in original (data) order,
- * implemented externally.
- *
- * MD5 example:
- *
- * #define DATA_ORDER_IS_LITTLE_ENDIAN
- *
- * #define HASH_LONG MD5_LONG
- * #define HASH_LONG_LOG2 MD5_LONG_LOG2
- * #define HASH_CTX MD5_CTX
- * #define HASH_CBLOCK MD5_CBLOCK
- * #define HASH_LBLOCK MD5_LBLOCK
- * #define HASH_UPDATE MD5_Update
- * #define HASH_TRANSFORM MD5_Transform
- * #define HASH_FINAL MD5_Final
- * #define HASH_BLOCK_HOST_ORDER md5_block_host_order
- * #define HASH_BLOCK_DATA_ORDER md5_block_data_order
- *
- * <appro@fy.chalmers.se>
- */
- #if !defined(DATA_ORDER_IS_BIG_ENDIAN) && !defined(DATA_ORDER_IS_LITTLE_ENDIAN)
- #error "DATA_ORDER must be defined!"
- #endif
- #ifndef HASH_CBLOCK
- #error "HASH_CBLOCK must be defined!"
- #endif
- #ifndef HASH_LONG
- #error "HASH_LONG must be defined!"
- #endif
- #ifndef HASH_CTX
- #error "HASH_CTX must be defined!"
- #endif
- #ifndef HASH_UPDATE
- #error "HASH_UPDATE must be defined!"
- #endif
- #ifndef HASH_TRANSFORM
- #error "HASH_TRANSFORM must be defined!"
- #endif
- #ifndef HASH_FINAL
- #error "HASH_FINAL must be defined!"
- #endif
- #ifndef HASH_BLOCK_HOST_ORDER
- #error "HASH_BLOCK_HOST_ORDER must be defined!"
- #endif
- #if 0
- /*
- * Moved below as it's required only if HASH_BLOCK_DATA_ORDER_ALIGNED
- * isn't defined.
- */
- #ifndef HASH_BLOCK_DATA_ORDER
- #error "HASH_BLOCK_DATA_ORDER must be defined!"
- #endif
- #endif
- #ifndef HASH_LBLOCK
- #define HASH_LBLOCK (HASH_CBLOCK/4)
- #endif
- #ifndef HASH_LONG_LOG2
- #define HASH_LONG_LOG2 2
- #endif
- /*
- * Engage compiler specific rotate intrinsic function if available.
- */
- #undef ROTATE
- #ifndef PEDANTIC
- # if defined(_MSC_VER) || defined(__ICC)
- # define ROTATE(a,n) _lrotl(a,n)
- # elif defined(__MWERKS__)
- # if defined(__POWERPC__)
- # define ROTATE(a,n) __rlwinm(a,n,0,31)
- # elif defined(__MC68K__)
- /* Motorola specific tweak. <appro@fy.chalmers.se> */
- # define ROTATE(a,n) ( n<24 ? __rol(a,n) : __ror(a,32-n) )
- # else
- # define ROTATE(a,n) __rol(a,n)
- # endif
- # elif defined(__GNUC__) && __GNUC__>=2 && !defined(OPENSSL_NO_ASM) && !defined(OPENSSL_NO_INLINE_ASM)
- /*
- * Some GNU C inline assembler templates. Note that these are
- * rotates by *constant* number of bits! But that's exactly
- * what we need here...
- * <appro@fy.chalmers.se>
- */
- # if defined(__i386) || defined(__i386__) || defined(__x86_64) || defined(__x86_64__)
- # define ROTATE(a,n) ({ register unsigned int ret; \
- asm ( \
- "roll %1,%0" \
- : "=r"(ret) \
- : "I"(n), "0"(a) \
- : "cc"); \
- ret; \
- })
- # elif defined(__powerpc) || defined(__ppc__) || defined(__powerpc64__)
- # define ROTATE(a,n) ({ register unsigned int ret; \
- asm ( \
- "rlwinm %0,%1,%2,0,31" \
- : "=r"(ret) \
- : "r"(a), "I"(n)); \
- ret; \
- })
- # endif
- # endif
- #endif /* PEDANTIC */
- #if HASH_LONG_LOG2==2 /* Engage only if sizeof(HASH_LONG)== 4 */
- /* A nice byte order reversal from Wei Dai <weidai@eskimo.com> */
- #ifdef ROTATE
- /* 5 instructions with rotate instruction, else 9 */
- #define REVERSE_FETCH32(a,l) ( \
- l=*(const HASH_LONG *)(a), \
- ((ROTATE(l,8)&0x00FF00FF)|(ROTATE((l&0x00FF00FF),24))) \
- )
- #else
- /* 6 instructions with rotate instruction, else 8 */
- #define REVERSE_FETCH32(a,l) ( \
- l=*(const HASH_LONG *)(a), \
- l=(((l>>8)&0x00FF00FF)|((l&0x00FF00FF)<<8)), \
- ROTATE(l,16) \
- )
- /*
- * Originally the middle line started with l=(((l&0xFF00FF00)>>8)|...
- * It's rewritten as above for two reasons:
- * - RISCs aren't good at long constants and have to explicitely
- * compose 'em with several (well, usually 2) instructions in a
- * register before performing the actual operation and (as you
- * already realized:-) having same constant should inspire the
- * compiler to permanently allocate the only register for it;
- * - most modern CPUs have two ALUs, but usually only one has
- * circuitry for shifts:-( this minor tweak inspires compiler
- * to schedule shift instructions in a better way...
- *
- * <appro@fy.chalmers.se>
- */
- #endif
- #endif
- #ifndef ROTATE
- #define ROTATE(a,n) (((a)<<(n))|(((a)&0xffffffff)>>(32-(n))))
- #endif
- /*
- * Make some obvious choices. E.g., HASH_BLOCK_DATA_ORDER_ALIGNED
- * and HASH_BLOCK_HOST_ORDER ought to be the same if input data
- * and host are of the same "endianess". It's possible to mask
- * this with blank #define HASH_BLOCK_DATA_ORDER though...
- *
- * <appro@fy.chalmers.se>
- */
- #if defined(B_ENDIAN)
- # if defined(DATA_ORDER_IS_BIG_ENDIAN)
- # if !defined(HASH_BLOCK_DATA_ORDER_ALIGNED) && HASH_LONG_LOG2==2
- # define HASH_BLOCK_DATA_ORDER_ALIGNED HASH_BLOCK_HOST_ORDER
- # endif
- # endif
- #elif defined(L_ENDIAN)
- # if defined(DATA_ORDER_IS_LITTLE_ENDIAN)
- # if !defined(HASH_BLOCK_DATA_ORDER_ALIGNED) && HASH_LONG_LOG2==2
- # define HASH_BLOCK_DATA_ORDER_ALIGNED HASH_BLOCK_HOST_ORDER
- # endif
- # endif
- #endif
- #if !defined(HASH_BLOCK_DATA_ORDER_ALIGNED)
- #ifndef HASH_BLOCK_DATA_ORDER
- #error "HASH_BLOCK_DATA_ORDER must be defined!"
- #endif
- #endif
- #if defined(DATA_ORDER_IS_BIG_ENDIAN)
- #ifndef PEDANTIC
- # if defined(__GNUC__) && __GNUC__>=2 && !defined(OPENSSL_NO_ASM) && !defined(OPENSSL_NO_INLINE_ASM)
- # if ((defined(__i386) || defined(__i386__)) && !defined(I386_ONLY)) || \
- (defined(__x86_64) || defined(__x86_64__))
- # if !defined(B_ENDIAN)
- /*
- * This gives ~30-40% performance improvement in SHA-256 compiled
- * with gcc [on P4]. Well, first macro to be frank. We can pull
- * this trick on x86* platforms only, because these CPUs can fetch
- * unaligned data without raising an exception.
- */
- # define HOST_c2l(c,l) ({ unsigned int r=*((const unsigned int *)(c)); \
- asm ("bswapl %0":"=r"(r):"0"(r)); \
- (c)+=4; (l)=r; })
- # define HOST_l2c(l,c) ({ unsigned int r=(l); \
- asm ("bswapl %0":"=r"(r):"0"(r)); \
- *((unsigned int *)(c))=r; (c)+=4; r; })
- # endif
- # endif
- # endif
- #endif
- #ifndef HOST_c2l
- #define HOST_c2l(c,l) (l =(((unsigned long)(*((c)++)))<<24), \
- l|=(((unsigned long)(*((c)++)))<<16), \
- l|=(((unsigned long)(*((c)++)))<< 8), \
- l|=(((unsigned long)(*((c)++))) ), \
- l)
- #endif
- #define HOST_p_c2l(c,l,n) { \
- switch (n) { \
- case 0: l =((unsigned long)(*((c)++)))<<24; \
- case 1: l|=((unsigned long)(*((c)++)))<<16; \
- case 2: l|=((unsigned long)(*((c)++)))<< 8; \
- case 3: l|=((unsigned long)(*((c)++))); \
- } }
- #define HOST_p_c2l_p(c,l,sc,len) { \
- switch (sc) { \
- case 0: l =((unsigned long)(*((c)++)))<<24; \
- if (--len == 0) break; \
- case 1: l|=((unsigned long)(*((c)++)))<<16; \
- if (--len == 0) break; \
- case 2: l|=((unsigned long)(*((c)++)))<< 8; \
- } }
- /* NOTE the pointer is not incremented at the end of this */
- #define HOST_c2l_p(c,l,n) { \
- l=0; (c)+=n; \
- switch (n) { \
- case 3: l =((unsigned long)(*(--(c))))<< 8; \
- case 2: l|=((unsigned long)(*(--(c))))<<16; \
- case 1: l|=((unsigned long)(*(--(c))))<<24; \
- } }
- #ifndef HOST_l2c
- #define HOST_l2c(l,c) (*((c)++)=(unsigned char)(((l)>>24)&0xff), \
- *((c)++)=(unsigned char)(((l)>>16)&0xff), \
- *((c)++)=(unsigned char)(((l)>> 8)&0xff), \
- *((c)++)=(unsigned char)(((l) )&0xff), \
- l)
- #endif
- #elif defined(DATA_ORDER_IS_LITTLE_ENDIAN)
- #if defined(__i386) || defined(__i386__) || defined(__x86_64) || defined(__x86_64__)
- # ifndef B_ENDIAN
- /* See comment in DATA_ORDER_IS_BIG_ENDIAN section. */
- # define HOST_c2l(c,l) ((l)=*((const unsigned int *)(c)), (c)+=4, l)
- # define HOST_l2c(l,c) (*((unsigned int *)(c))=(l), (c)+=4, l)
- # endif
- #endif
- #ifndef HOST_c2l
- #define HOST_c2l(c,l) (l =(((unsigned long)(*((c)++))) ), \
- l|=(((unsigned long)(*((c)++)))<< 8), \
- l|=(((unsigned long)(*((c)++)))<<16), \
- l|=(((unsigned long)(*((c)++)))<<24), \
- l)
- #endif
- #define HOST_p_c2l(c,l,n) { \
- switch (n) { \
- case 0: l =((unsigned long)(*((c)++))); \
- case 1: l|=((unsigned long)(*((c)++)))<< 8; \
- case 2: l|=((unsigned long)(*((c)++)))<<16; \
- case 3: l|=((unsigned long)(*((c)++)))<<24; \
- } }
- #define HOST_p_c2l_p(c,l,sc,len) { \
- switch (sc) { \
- case 0: l =((unsigned long)(*((c)++))); \
- if (--len == 0) break; \
- case 1: l|=((unsigned long)(*((c)++)))<< 8; \
- if (--len == 0) break; \
- case 2: l|=((unsigned long)(*((c)++)))<<16; \
- } }
- /* NOTE the pointer is not incremented at the end of this */
- #define HOST_c2l_p(c,l,n) { \
- l=0; (c)+=n; \
- switch (n) { \
- case 3: l =((unsigned long)(*(--(c))))<<16; \
- case 2: l|=((unsigned long)(*(--(c))))<< 8; \
- case 1: l|=((unsigned long)(*(--(c)))); \
- } }
- #ifndef HOST_l2c
- #define HOST_l2c(l,c) (*((c)++)=(unsigned char)(((l) )&0xff), \
- *((c)++)=(unsigned char)(((l)>> 8)&0xff), \
- *((c)++)=(unsigned char)(((l)>>16)&0xff), \
- *((c)++)=(unsigned char)(((l)>>24)&0xff), \
- l)
- #endif
- #endif
- /*
- * Time for some action:-)
- */
- int HASH_UPDATE (HASH_CTX *c, const void *data_, size_t len)
- {
- const unsigned char *data=data_;
- register HASH_LONG * p;
- register HASH_LONG l;
- size_t sw,sc,ew,ec;
- if (len==0) return 1;
- l=(c->Nl+(((HASH_LONG)len)<<3))&0xffffffffUL;
- /* 95-05-24 eay Fixed a bug with the overflow handling, thanks to
- * Wei Dai <weidai@eskimo.com> for pointing it out. */
- if (l < c->Nl) /* overflow */
- c->Nh++;
- c->Nh+=(len>>29); /* might cause compiler warning on 16-bit */
- c->Nl=l;
- if (c->num != 0)
- {
- p=c->data;
- sw=c->num>>2;
- sc=c->num&0x03;
- if ((c->num+len) >= HASH_CBLOCK)
- {
- l=p[sw]; HOST_p_c2l(data,l,sc); p[sw++]=l;
- for (; sw<HASH_LBLOCK; sw++)
- {
- HOST_c2l(data,l); p[sw]=l;
- }
- HASH_BLOCK_HOST_ORDER (c,p,1);
- len-=(HASH_CBLOCK-c->num);
- c->num=0;
- /* drop through and do the rest */
- }
- else
- {
- c->num+=(unsigned int)len;
- if ((sc+len) < 4) /* ugly, add char's to a word */
- {
- l=p[sw]; HOST_p_c2l_p(data,l,sc,len); p[sw]=l;
- }
- else
- {
- ew=(c->num>>2);
- ec=(c->num&0x03);
- if (sc)
- l=p[sw];
- HOST_p_c2l(data,l,sc);
- p[sw++]=l;
- for (; sw < ew; sw++)
- {
- HOST_c2l(data,l); p[sw]=l;
- }
- if (ec)
- {
- HOST_c2l_p(data,l,ec); p[sw]=l;
- }
- }
- return 1;
- }
- }
- sw=len/HASH_CBLOCK;
- if (sw > 0)
- {
- #if defined(HASH_BLOCK_DATA_ORDER_ALIGNED)
- /*
- * Note that HASH_BLOCK_DATA_ORDER_ALIGNED gets defined
- * only if sizeof(HASH_LONG)==4.
- */
- if ((((size_t)data)%4) == 0)
- {
- /* data is properly aligned so that we can cast it: */
- HASH_BLOCK_DATA_ORDER_ALIGNED (c,(const HASH_LONG *)data,sw);
- sw*=HASH_CBLOCK;
- data+=sw;
- len-=sw;
- }
- else
- #if !defined(HASH_BLOCK_DATA_ORDER)
- while (sw--)
- {
- memcpy (p=c->data,data,HASH_CBLOCK);
- HASH_BLOCK_DATA_ORDER_ALIGNED(c,p,1);
- data+=HASH_CBLOCK;
- len-=HASH_CBLOCK;
- }
- #endif
- #endif
- #if defined(HASH_BLOCK_DATA_ORDER)
- {
- HASH_BLOCK_DATA_ORDER(c,data,sw);
- sw*=HASH_CBLOCK;
- data+=sw;
- len-=sw;
- }
- #endif
- }
- if (len!=0)
- {
- p = c->data;
- c->num = len;
- ew=len>>2; /* words to copy */
- ec=len&0x03;
- for (; ew; ew--,p++)
- {
- HOST_c2l(data,l); *p=l;
- }
- HOST_c2l_p(data,l,ec);
- *p=l;
- }
- return 1;
- }
- void HASH_TRANSFORM (HASH_CTX *c, const unsigned char *data)
- {
- #if defined(HASH_BLOCK_DATA_ORDER_ALIGNED)
- if ((((size_t)data)%4) == 0)
- /* data is properly aligned so that we can cast it: */
- HASH_BLOCK_DATA_ORDER_ALIGNED (c,(const HASH_LONG *)data,1);
- else
- #if !defined(HASH_BLOCK_DATA_ORDER)
- {
- memcpy (c->data,data,HASH_CBLOCK);
- HASH_BLOCK_DATA_ORDER_ALIGNED (c,c->data,1);
- }
- #endif
- #endif
- #if defined(HASH_BLOCK_DATA_ORDER)
- HASH_BLOCK_DATA_ORDER (c,data,1);
- #endif
- }
- int HASH_FINAL (unsigned char *md, HASH_CTX *c)
- {
- register HASH_LONG *p;
- register unsigned long l;
- register int i,j;
- static const unsigned char end[4]={0x80,0x00,0x00,0x00};
- const unsigned char *cp=end;
- /* c->num should definitly have room for at least one more byte. */
- p=c->data;
- i=c->num>>2;
- j=c->num&0x03;
- #if 0
- /* purify often complains about the following line as an
- * Uninitialized Memory Read. While this can be true, the
- * following p_c2l macro will reset l when that case is true.
- * This is because j&0x03 contains the number of 'valid' bytes
- * already in p[i]. If and only if j&0x03 == 0, the UMR will
- * occur but this is also the only time p_c2l will do
- * l= *(cp++) instead of l|= *(cp++)
- * Many thanks to Alex Tang <altitude@cic.net> for pickup this
- * 'potential bug' */
- #ifdef PURIFY
- if (j==0) p[i]=0; /* Yeah, but that's not the way to fix it:-) */
- #endif
- l=p[i];
- #else
- l = (j==0) ? 0 : p[i];
- #endif
- HOST_p_c2l(cp,l,j); p[i++]=l; /* i is the next 'undefined word' */
- if (i>(HASH_LBLOCK-2)) /* save room for Nl and Nh */
- {
- if (i<HASH_LBLOCK) p[i]=0;
- HASH_BLOCK_HOST_ORDER (c,p,1);
- i=0;
- }
- for (; i<(HASH_LBLOCK-2); i++)
- p[i]=0;
- #if defined(DATA_ORDER_IS_BIG_ENDIAN)
- p[HASH_LBLOCK-2]=c->Nh;
- p[HASH_LBLOCK-1]=c->Nl;
- #elif defined(DATA_ORDER_IS_LITTLE_ENDIAN)
- p[HASH_LBLOCK-2]=c->Nl;
- p[HASH_LBLOCK-1]=c->Nh;
- #endif
- HASH_BLOCK_HOST_ORDER (c,p,1);
- #ifndef HASH_MAKE_STRING
- #error "HASH_MAKE_STRING must be defined!"
- #else
- HASH_MAKE_STRING(c,md);
- #endif
- c->num=0;
- /* clear stuff, HASH_BLOCK may be leaving some stuff on the stack
- * but I'm not worried :-)
- OPENSSL_cleanse((void *)c,sizeof(HASH_CTX));
- */
- return 1;
- }
- #ifndef MD32_REG_T
- #define MD32_REG_T long
- /*
- * This comment was originaly written for MD5, which is why it
- * discusses A-D. But it basically applies to all 32-bit digests,
- * which is why it was moved to common header file.
- *
- * In case you wonder why A-D are declared as long and not
- * as MD5_LONG. Doing so results in slight performance
- * boost on LP64 architectures. The catch is we don't
- * really care if 32 MSBs of a 64-bit register get polluted
- * with eventual overflows as we *save* only 32 LSBs in
- * *either* case. Now declaring 'em long excuses the compiler
- * from keeping 32 MSBs zeroed resulting in 13% performance
- * improvement under SPARC Solaris7/64 and 5% under AlphaLinux.
- * Well, to be honest it should say that this *prevents*
- * performance degradation.
- * <appro@fy.chalmers.se>
- * Apparently there're LP64 compilers that generate better
- * code if A-D are declared int. Most notably GCC-x86_64
- * generates better code.
- * <appro@fy.chalmers.se>
- */
- #endif
|