123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248 |
- /*
- * Copyright 2015-2016 The OpenSSL Project Authors. All Rights Reserved.
- *
- * Licensed under the OpenSSL license (the "License"). You may not use
- * this file except in compliance with the License. You can obtain a copy
- * in the file LICENSE in the source distribution or at
- * https://www.openssl.org/source/license.html
- */
- #include <stddef.h>
- #include <stdio.h>
- #include <string.h>
- #include <openssl/evp.h>
- #include <openssl/err.h>
- #include <internal/numbers.h>
- #ifndef OPENSSL_NO_SCRYPT
- #define R(a,b) (((a) << (b)) | ((a) >> (32 - (b))))
- static void salsa208_word_specification(uint32_t inout[16])
- {
- int i;
- uint32_t x[16];
- memcpy(x, inout, sizeof(x));
- for (i = 8; i > 0; i -= 2) {
- x[4] ^= R(x[0] + x[12], 7);
- x[8] ^= R(x[4] + x[0], 9);
- x[12] ^= R(x[8] + x[4], 13);
- x[0] ^= R(x[12] + x[8], 18);
- x[9] ^= R(x[5] + x[1], 7);
- x[13] ^= R(x[9] + x[5], 9);
- x[1] ^= R(x[13] + x[9], 13);
- x[5] ^= R(x[1] + x[13], 18);
- x[14] ^= R(x[10] + x[6], 7);
- x[2] ^= R(x[14] + x[10], 9);
- x[6] ^= R(x[2] + x[14], 13);
- x[10] ^= R(x[6] + x[2], 18);
- x[3] ^= R(x[15] + x[11], 7);
- x[7] ^= R(x[3] + x[15], 9);
- x[11] ^= R(x[7] + x[3], 13);
- x[15] ^= R(x[11] + x[7], 18);
- x[1] ^= R(x[0] + x[3], 7);
- x[2] ^= R(x[1] + x[0], 9);
- x[3] ^= R(x[2] + x[1], 13);
- x[0] ^= R(x[3] + x[2], 18);
- x[6] ^= R(x[5] + x[4], 7);
- x[7] ^= R(x[6] + x[5], 9);
- x[4] ^= R(x[7] + x[6], 13);
- x[5] ^= R(x[4] + x[7], 18);
- x[11] ^= R(x[10] + x[9], 7);
- x[8] ^= R(x[11] + x[10], 9);
- x[9] ^= R(x[8] + x[11], 13);
- x[10] ^= R(x[9] + x[8], 18);
- x[12] ^= R(x[15] + x[14], 7);
- x[13] ^= R(x[12] + x[15], 9);
- x[14] ^= R(x[13] + x[12], 13);
- x[15] ^= R(x[14] + x[13], 18);
- }
- for (i = 0; i < 16; ++i)
- inout[i] += x[i];
- OPENSSL_cleanse(x, sizeof(x));
- }
- static void scryptBlockMix(uint32_t *B_, uint32_t *B, uint64_t r)
- {
- uint64_t i, j;
- uint32_t X[16], *pB;
- memcpy(X, B + (r * 2 - 1) * 16, sizeof(X));
- pB = B;
- for (i = 0; i < r * 2; i++) {
- for (j = 0; j < 16; j++)
- X[j] ^= *pB++;
- salsa208_word_specification(X);
- memcpy(B_ + (i / 2 + (i & 1) * r) * 16, X, sizeof(X));
- }
- OPENSSL_cleanse(X, sizeof(X));
- }
- static void scryptROMix(unsigned char *B, uint64_t r, uint64_t N,
- uint32_t *X, uint32_t *T, uint32_t *V)
- {
- unsigned char *pB;
- uint32_t *pV;
- uint64_t i, k;
- /* Convert from little endian input */
- for (pV = V, i = 0, pB = B; i < 32 * r; i++, pV++) {
- *pV = *pB++;
- *pV |= *pB++ << 8;
- *pV |= *pB++ << 16;
- *pV |= (uint32_t)*pB++ << 24;
- }
- for (i = 1; i < N; i++, pV += 32 * r)
- scryptBlockMix(pV, pV - 32 * r, r);
- scryptBlockMix(X, V + (N - 1) * 32 * r, r);
- for (i = 0; i < N; i++) {
- uint32_t j;
- j = X[16 * (2 * r - 1)] % N;
- pV = V + 32 * r * j;
- for (k = 0; k < 32 * r; k++)
- T[k] = X[k] ^ *pV++;
- scryptBlockMix(X, T, r);
- }
- /* Convert output to little endian */
- for (i = 0, pB = B; i < 32 * r; i++) {
- uint32_t xtmp = X[i];
- *pB++ = xtmp & 0xff;
- *pB++ = (xtmp >> 8) & 0xff;
- *pB++ = (xtmp >> 16) & 0xff;
- *pB++ = (xtmp >> 24) & 0xff;
- }
- }
- #ifndef SIZE_MAX
- # define SIZE_MAX ((size_t)-1)
- #endif
- /*
- * Maximum power of two that will fit in uint64_t: this should work on
- * most (all?) platforms.
- */
- #define LOG2_UINT64_MAX (sizeof(uint64_t) * 8 - 1)
- /*
- * Maximum value of p * r:
- * p <= ((2^32-1) * hLen) / MFLen =>
- * p <= ((2^32-1) * 32) / (128 * r) =>
- * p * r <= (2^30-1)
- *
- */
- #define SCRYPT_PR_MAX ((1 << 30) - 1)
- /*
- * Maximum permitted memory allow this to be overridden with Configuration
- * option: e.g. -DSCRYPT_MAX_MEM=0 for maximum possible.
- */
- #ifdef SCRYPT_MAX_MEM
- # if SCRYPT_MAX_MEM == 0
- # undef SCRYPT_MAX_MEM
- /*
- * Although we could theoretically allocate SIZE_MAX memory that would leave
- * no memory available for anything else so set limit as half that.
- */
- # define SCRYPT_MAX_MEM (SIZE_MAX/2)
- # endif
- #else
- /* Default memory limit: 32 MB */
- # define SCRYPT_MAX_MEM (1024 * 1024 * 32)
- #endif
- int EVP_PBE_scrypt(const char *pass, size_t passlen,
- const unsigned char *salt, size_t saltlen,
- uint64_t N, uint64_t r, uint64_t p, uint64_t maxmem,
- unsigned char *key, size_t keylen)
- {
- int rv = 0;
- unsigned char *B;
- uint32_t *X, *V, *T;
- uint64_t i, Blen, Vlen;
- size_t allocsize;
- /* Sanity check parameters */
- /* initial check, r,p must be non zero, N >= 2 and a power of 2 */
- if (r == 0 || p == 0 || N < 2 || (N & (N - 1)))
- return 0;
- /* Check p * r < SCRYPT_PR_MAX avoiding overflow */
- if (p > SCRYPT_PR_MAX / r)
- return 0;
- /*
- * Need to check N: if 2^(128 * r / 8) overflows limit this is
- * automatically satisfied since N <= UINT64_MAX.
- */
- if (16 * r <= LOG2_UINT64_MAX) {
- if (N >= (((uint64_t)1) << (16 * r)))
- return 0;
- }
- /* Memory checks: check total allocated buffer size fits in uint64_t */
- /*
- * B size in section 5 step 1.S
- * Note: we know p * 128 * r < UINT64_MAX because we already checked
- * p * r < SCRYPT_PR_MAX
- */
- Blen = p * 128 * r;
- /*
- * Check 32 * r * (N + 2) * sizeof(uint32_t) fits in
- * uint64_t and also size_t (their sizes are unrelated).
- * This is combined size V, X and T (section 4)
- */
- i = UINT64_MAX / (32 * sizeof(uint32_t));
- if (N + 2 > i / r)
- return 0;
- Vlen = 32 * r * (N + 2) * sizeof(uint32_t);
- /* check total allocated size fits in uint64_t */
- if (Blen > UINT64_MAX - Vlen)
- return 0;
- /* check total allocated size fits in size_t */
- if (Blen > SIZE_MAX - Vlen)
- return 0;
- allocsize = (size_t)(Blen + Vlen);
- if (maxmem == 0)
- maxmem = SCRYPT_MAX_MEM;
- if (allocsize > maxmem) {
- EVPerr(EVP_F_EVP_PBE_SCRYPT, EVP_R_MEMORY_LIMIT_EXCEEDED);
- return 0;
- }
- /* If no key return to indicate parameters are OK */
- if (key == NULL)
- return 1;
- B = OPENSSL_malloc(allocsize);
- if (B == NULL)
- return 0;
- X = (uint32_t *)(B + Blen);
- T = X + 32 * r;
- V = T + 32 * r;
- if (PKCS5_PBKDF2_HMAC(pass, passlen, salt, saltlen, 1, EVP_sha256(),
- Blen, B) == 0)
- goto err;
- for (i = 0; i < p; i++)
- scryptROMix(B + 128 * r * i, r, N, X, T, V);
- if (PKCS5_PBKDF2_HMAC(pass, passlen, B, Blen, 1, EVP_sha256(),
- keylen, key) == 0)
- goto err;
- rv = 1;
- err:
- OPENSSL_clear_free(B, allocsize);
- return rv;
- }
- #endif
|