1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586878889909192939495969798991001011021031041051061071081091101111121131141151161171181191201211221231241251261271281291301311321331341351361371381391401411421431441451461471481491501511521531541551561571581591601611621631641651661671681691701711721731741751761771781791801811821831841851861871881891901911921931941951961971981992002012022032042052062072082092102112122132142152162172182192202212222232242252262272282292302312322332342352362372382392402412422432442452462472482492502512522532542552562572582592602612622632642652662672682692702712722732742752762772782792802812822832842852862872882892902912922932942952962972982993003013023033043053063073083093103113123133143153163173183193203213223233243253263273283293303313323333343353363373383393403413423433443453463473483493503513523533543553563573583593603613623633643653663673683693703713723733743753763773783793803813823833843853863873883893903913923933943953963973983994004014024034044054064074084094104114124134144154164174184194204214224234244254264274284294304314324334344354364374384394404414424434444454464474484494504514524534544554564574584594604614624634644654664674684694704714724734744754764774784794804814824834844854864874884894904914924934944954964974984995005015025035045055065075085095105115125135145155165175185195205215225235245255265275285295305315325335345355365375385395405415425435445455465475485495505515525535545555565575585595605615625635645655665675685695705715725735745755765775785795805815825835845855865875885895905915925935945955965975985996006016026036046056066076086096106116126136146156166176186196206216226236246256266276286296306316326336346356366376386396406416426436446456466476486496506516526536546556566576586596606616626636646656666676686696706716726736746756766776786796806816826836846856866876886896906916926936946956966976986997007017027037047057067077087097107117127137147157167177187197207217227237247257267277287297307317327337347357367377387397407417427437447457467477487497507517527537547557567577587597607617627637647657667677687697707717727737747757767777787797807817827837847857867877887897907917927937947957967977987998008018028038048058068078088098108118128138148158168178188198208218228238248258268278288298308318328338348358368378388398408418428438448458468478488498508518528538548558568578588598608618628638648658668678688698708718728738748758768778788798808818828838848858868878888898908918928938948958968978988999009019029039049059069079089099109119129139149159169179189199209219229239249259269279289299309319329339349359369379389399409419429439449459469479489499509519529539549559569579589599609619629639649659669679689699709719729739749759769779789799809819829839849859869879889899909919929939949959969979989991000100110021003100410051006100710081009101010111012101310141015101610171018101910201021102210231024102510261027102810291030103110321033103410351036103710381039104010411042104310441045104610471048104910501051105210531054105510561057105810591060106110621063106410651066106710681069107010711072107310741075107610771078107910801081108210831084108510861087108810891090109110921093109410951096109710981099110011011102110311041105110611071108110911101111111211131114111511161117111811191120112111221123112411251126112711281129113011311132113311341135113611371138113911401141114211431144114511461147114811491150115111521153115411551156115711581159116011611162116311641165116611671168116911701171117211731174117511761177117811791180118111821183118411851186118711881189119011911192119311941195119611971198119912001201120212031204120512061207120812091210121112121213121412151216121712181219122012211222122312241225122612271228122912301231123212331234123512361237123812391240124112421243124412451246124712481249125012511252125312541255125612571258125912601261126212631264126512661267126812691270127112721273127412751276127712781279128012811282128312841285128612871288128912901291129212931294129512961297129812991300130113021303130413051306130713081309131013111312131313141315131613171318131913201321132213231324132513261327132813291330133113321333133413351336133713381339134013411342134313441345134613471348134913501351135213531354135513561357135813591360136113621363136413651366136713681369137013711372137313741375137613771378137913801381138213831384138513861387138813891390139113921393139413951396139713981399140014011402140314041405140614071408140914101411141214131414141514161417141814191420142114221423142414251426142714281429143014311432143314341435143614371438143914401441144214431444144514461447144814491450145114521453145414551456145714581459146014611462146314641465146614671468146914701471147214731474147514761477147814791480148114821483148414851486148714881489149014911492149314941495149614971498149915001501150215031504150515061507150815091510151115121513151415151516151715181519152015211522152315241525152615271528152915301531153215331534153515361537153815391540154115421543154415451546154715481549155015511552155315541555155615571558155915601561156215631564156515661567156815691570157115721573157415751576157715781579158015811582158315841585158615871588158915901591159215931594159515961597159815991600160116021603160416051606160716081609161016111612161316141615161616171618161916201621162216231624162516261627162816291630163116321633163416351636163716381639164016411642164316441645164616471648164916501651165216531654165516561657165816591660166116621663166416651666166716681669167016711672167316741675167616771678167916801681168216831684168516861687168816891690169116921693169416951696169716981699170017011702170317041705170617071708170917101711171217131714171517161717171817191720172117221723172417251726172717281729173017311732173317341735173617371738173917401741174217431744174517461747174817491750175117521753175417551756175717581759176017611762176317641765176617671768176917701771177217731774177517761777177817791780178117821783178417851786178717881789179017911792179317941795179617971798179918001801180218031804180518061807180818091810181118121813181418151816181718181819182018211822182318241825182618271828182918301831183218331834183518361837183818391840184118421843184418451846184718481849185018511852185318541855185618571858185918601861186218631864186518661867186818691870187118721873187418751876187718781879188018811882188318841885188618871888188918901891189218931894189518961897189818991900190119021903190419051906190719081909191019111912191319141915191619171918191919201921192219231924192519261927192819291930193119321933193419351936193719381939194019411942194319441945194619471948194919501951195219531954195519561957195819591960196119621963196419651966196719681969197019711972197319741975197619771978197919801981198219831984198519861987198819891990199119921993199419951996199719981999200020012002200320042005200620072008200920102011201220132014201520162017201820192020202120222023202420252026202720282029203020312032203320342035203620372038203920402041204220432044204520462047204820492050205120522053205420552056205720582059206020612062206320642065206620672068206920702071207220732074207520762077207820792080208120822083208420852086208720882089209020912092209320942095209620972098209921002101210221032104210521062107210821092110211121122113211421152116211721182119212021212122212321242125212621272128212921302131213221332134213521362137213821392140214121422143214421452146214721482149215021512152215321542155215621572158215921602161216221632164216521662167216821692170217121722173217421752176217721782179218021812182218321842185218621872188218921902191219221932194219521962197219821992200220122022203220422052206220722082209221022112212221322142215221622172218221922202221222222232224222522262227222822292230223122322233223422352236223722382239224022412242224322442245224622472248224922502251225222532254225522562257225822592260226122622263226422652266226722682269227022712272227322742275227622772278227922802281228222832284228522862287228822892290229122922293229422952296229722982299230023012302230323042305230623072308230923102311231223132314231523162317231823192320232123222323232423252326232723282329233023312332233323342335233623372338233923402341234223432344234523462347234823492350235123522353235423552356235723582359236023612362236323642365236623672368236923702371237223732374237523762377237823792380238123822383238423852386238723882389239023912392239323942395239623972398239924002401240224032404240524062407240824092410241124122413241424152416241724182419242024212422242324242425242624272428242924302431243224332434243524362437243824392440244124422443244424452446244724482449245024512452245324542455245624572458245924602461246224632464246524662467246824692470247124722473247424752476247724782479248024812482248324842485248624872488248924902491249224932494249524962497249824992500250125022503250425052506250725082509251025112512251325142515251625172518251925202521252225232524252525262527252825292530253125322533253425352536253725382539254025412542254325442545254625472548254925502551255225532554255525562557255825592560256125622563256425652566256725682569257025712572257325742575257625772578257925802581258225832584258525862587258825892590259125922593259425952596259725982599260026012602260326042605260626072608260926102611261226132614261526162617261826192620262126222623262426252626262726282629263026312632263326342635263626372638263926402641264226432644264526462647264826492650265126522653265426552656265726582659266026612662266326642665266626672668266926702671267226732674267526762677267826792680268126822683268426852686268726882689269026912692269326942695269626972698269927002701270227032704270527062707270827092710271127122713271427152716271727182719272027212722272327242725272627272728272927302731273227332734273527362737273827392740274127422743274427452746274727482749275027512752275327542755275627572758275927602761276227632764276527662767276827692770277127722773277427752776277727782779278027812782278327842785278627872788278927902791279227932794279527962797279827992800280128022803280428052806280728082809281028112812281328142815281628172818281928202821282228232824282528262827282828292830283128322833283428352836283728382839284028412842284328442845284628472848284928502851285228532854285528562857285828592860286128622863286428652866286728682869287028712872287328742875287628772878287928802881288228832884288528862887288828892890289128922893289428952896289728982899290029012902290329042905290629072908290929102911291229132914291529162917291829192920292129222923292429252926292729282929293029312932293329342935293629372938293929402941294229432944294529462947294829492950295129522953295429552956295729582959296029612962296329642965296629672968296929702971297229732974297529762977297829792980298129822983298429852986298729882989299029912992299329942995299629972998299930003001300230033004300530063007300830093010301130123013301430153016301730183019302030213022302330243025302630273028302930303031303230333034303530363037303830393040304130423043304430453046304730483049305030513052305330543055305630573058305930603061306230633064306530663067306830693070307130723073307430753076307730783079308030813082308330843085308630873088308930903091309230933094309530963097309830993100310131023103310431053106310731083109311031113112311331143115311631173118311931203121312231233124312531263127312831293130313131323133313431353136313731383139314031413142314331443145314631473148314931503151315231533154315531563157315831593160316131623163316431653166316731683169317031713172317331743175317631773178317931803181318231833184318531863187318831893190319131923193319431953196319731983199320032013202320332043205320632073208320932103211321232133214321532163217321832193220322132223223322432253226322732283229323032313232323332343235323632373238323932403241324232433244324532463247324832493250325132523253325432553256325732583259326032613262326332643265326632673268326932703271327232733274327532763277327832793280328132823283328432853286328732883289329032913292329332943295329632973298329933003301330233033304330533063307330833093310331133123313331433153316331733183319332033213322332333243325332633273328332933303331333233333334333533363337333833393340334133423343334433453346334733483349335033513352335333543355335633573358335933603361336233633364336533663367336833693370337133723373337433753376337733783379338033813382338333843385338633873388338933903391339233933394339533963397339833993400340134023403340434053406340734083409341034113412341334143415341634173418341934203421342234233424342534263427342834293430343134323433343434353436343734383439344034413442344334443445344634473448344934503451345234533454345534563457345834593460346134623463346434653466346734683469347034713472347334743475347634773478347934803481348234833484348534863487348834893490349134923493349434953496349734983499350035013502350335043505350635073508350935103511351235133514351535163517351835193520352135223523352435253526352735283529353035313532353335343535353635373538353935403541354235433544354535463547354835493550355135523553355435553556355735583559356035613562356335643565356635673568356935703571357235733574357535763577357835793580358135823583358435853586358735883589359035913592359335943595359635973598359936003601360236033604360536063607360836093610361136123613361436153616361736183619362036213622362336243625362636273628362936303631363236333634363536363637363836393640364136423643364436453646364736483649365036513652365336543655365636573658365936603661366236633664366536663667366836693670367136723673367436753676367736783679368036813682368336843685368636873688368936903691369236933694369536963697369836993700370137023703370437053706370737083709371037113712371337143715371637173718371937203721372237233724372537263727372837293730373137323733373437353736373737383739374037413742374337443745374637473748374937503751375237533754375537563757375837593760376137623763376437653766376737683769377037713772377337743775377637773778377937803781378237833784378537863787378837893790379137923793379437953796379737983799380038013802380338043805380638073808380938103811381238133814381538163817381838193820382138223823382438253826382738283829383038313832383338343835383638373838383938403841384238433844384538463847384838493850385138523853385438553856385738583859386038613862386338643865386638673868386938703871387238733874387538763877387838793880388138823883388438853886388738883889389038913892389338943895389638973898389939003901390239033904390539063907390839093910391139123913391439153916391739183919392039213922392339243925392639273928392939303931393239333934393539363937393839393940394139423943394439453946394739483949395039513952395339543955395639573958395939603961396239633964396539663967396839693970397139723973397439753976397739783979398039813982398339843985398639873988398939903991399239933994399539963997399839994000400140024003400440054006400740084009401040114012401340144015401640174018401940204021402240234024402540264027402840294030403140324033403440354036403740384039404040414042404340444045404640474048404940504051405240534054405540564057405840594060406140624063406440654066406740684069407040714072407340744075407640774078407940804081408240834084408540864087408840894090409140924093409440954096409740984099410041014102410341044105410641074108410941104111411241134114411541164117411841194120412141224123412441254126412741284129413041314132413341344135413641374138413941404141414241434144414541464147414841494150415141524153415441554156415741584159416041614162416341644165416641674168416941704171417241734174417541764177417841794180418141824183418441854186418741884189419041914192419341944195419641974198419942004201420242034204420542064207420842094210421142124213421442154216421742184219422042214222422342244225422642274228422942304231423242334234423542364237423842394240424142424243424442454246424742484249425042514252425342544255425642574258425942604261426242634264426542664267426842694270427142724273427442754276427742784279428042814282428342844285428642874288428942904291429242934294429542964297429842994300430143024303430443054306430743084309431043114312431343144315431643174318431943204321432243234324432543264327432843294330433143324333433443354336433743384339434043414342434343444345434643474348434943504351435243534354435543564357435843594360436143624363436443654366436743684369437043714372437343744375437643774378437943804381438243834384438543864387438843894390439143924393439443954396439743984399440044014402440344044405440644074408440944104411441244134414441544164417441844194420442144224423442444254426442744284429443044314432443344344435443644374438443944404441444244434444444544464447444844494450445144524453445444554456445744584459446044614462446344644465446644674468446944704471447244734474447544764477447844794480448144824483448444854486448744884489449044914492449344944495449644974498449945004501450245034504450545064507450845094510451145124513451445154516451745184519452045214522452345244525452645274528452945304531453245334534453545364537453845394540454145424543454445454546454745484549455045514552455345544555455645574558455945604561456245634564456545664567456845694570457145724573457445754576457745784579458045814582458345844585458645874588458945904591459245934594459545964597459845994600460146024603460446054606460746084609461046114612461346144615461646174618461946204621462246234624462546264627462846294630463146324633463446354636463746384639464046414642464346444645464646474648464946504651465246534654465546564657465846594660466146624663466446654666466746684669467046714672467346744675467646774678467946804681468246834684468546864687468846894690469146924693469446954696469746984699470047014702470347044705470647074708470947104711471247134714471547164717471847194720472147224723472447254726472747284729473047314732473347344735473647374738473947404741474247434744474547464747474847494750475147524753475447554756475747584759476047614762476347644765476647674768476947704771477247734774477547764777477847794780478147824783478447854786478747884789479047914792479347944795479647974798479948004801480248034804480548064807480848094810481148124813481448154816481748184819482048214822482348244825482648274828482948304831483248334834483548364837483848394840484148424843484448454846484748484849485048514852485348544855485648574858485948604861486248634864486548664867486848694870487148724873487448754876487748784879488048814882488348844885488648874888488948904891489248934894489548964897489848994900490149024903490449054906490749084909491049114912491349144915491649174918491949204921492249234924492549264927492849294930493149324933493449354936493749384939494049414942494349444945494649474948494949504951495249534954495549564957495849594960496149624963496449654966496749684969497049714972497349744975497649774978497949804981498249834984498549864987498849894990499149924993499449954996499749984999500050015002500350045005500650075008500950105011501250135014501550165017501850195020502150225023502450255026502750285029503050315032503350345035503650375038503950405041504250435044504550465047504850495050505150525053505450555056505750585059506050615062506350645065506650675068506950705071507250735074507550765077507850795080508150825083508450855086508750885089509050915092509350945095509650975098509951005101510251035104510551065107510851095110511151125113511451155116511751185119512051215122512351245125512651275128512951305131513251335134513551365137513851395140514151425143514451455146514751485149515051515152515351545155515651575158515951605161516251635164516551665167516851695170517151725173517451755176517751785179518051815182518351845185518651875188518951905191519251935194519551965197519851995200520152025203520452055206520752085209521052115212521352145215521652175218521952205221522252235224522552265227522852295230523152325233523452355236523752385239524052415242524352445245524652475248524952505251525252535254525552565257525852595260526152625263526452655266526752685269527052715272527352745275527652775278527952805281528252835284528552865287528852895290529152925293529452955296529752985299530053015302530353045305530653075308530953105311531253135314531553165317531853195320532153225323532453255326532753285329533053315332533353345335533653375338533953405341534253435344534553465347534853495350535153525353535453555356535753585359536053615362536353645365536653675368536953705371537253735374537553765377537853795380538153825383538453855386538753885389539053915392539353945395539653975398539954005401540254035404540554065407540854095410541154125413541454155416541754185419542054215422542354245425542654275428542954305431543254335434543554365437543854395440544154425443544454455446544754485449545054515452545354545455545654575458545954605461546254635464546554665467546854695470547154725473547454755476547754785479548054815482548354845485548654875488548954905491549254935494549554965497549854995500550155025503550455055506550755085509551055115512551355145515551655175518551955205521552255235524552555265527552855295530553155325533553455355536553755385539554055415542554355445545554655475548554955505551555255535554555555565557555855595560556155625563556455655566556755685569557055715572557355745575557655775578557955805581558255835584558555865587558855895590559155925593559455955596559755985599560056015602560356045605560656075608560956105611561256135614561556165617561856195620562156225623562456255626562756285629563056315632563356345635563656375638563956405641564256435644564556465647564856495650565156525653565456555656565756585659566056615662566356645665566656675668566956705671567256735674567556765677567856795680568156825683568456855686568756885689569056915692569356945695569656975698569957005701570257035704570557065707570857095710571157125713571457155716571757185719572057215722572357245725572657275728572957305731573257335734573557365737573857395740574157425743574457455746574757485749575057515752575357545755575657575758575957605761576257635764576557665767576857695770577157725773577457755776577757785779578057815782578357845785578657875788578957905791579257935794579557965797579857995800580158025803580458055806580758085809581058115812581358145815581658175818581958205821582258235824582558265827582858295830583158325833583458355836583758385839584058415842584358445845584658475848584958505851585258535854585558565857585858595860586158625863586458655866586758685869587058715872587358745875587658775878587958805881588258835884588558865887588858895890589158925893589458955896589758985899590059015902590359045905590659075908590959105911591259135914591559165917591859195920592159225923592459255926592759285929593059315932593359345935593659375938593959405941594259435944594559465947594859495950595159525953595459555956595759585959596059615962596359645965596659675968596959705971597259735974597559765977597859795980598159825983598459855986598759885989599059915992599359945995599659975998599960006001600260036004600560066007600860096010601160126013601460156016601760186019602060216022602360246025602660276028602960306031603260336034603560366037603860396040604160426043604460456046604760486049605060516052605360546055605660576058605960606061606260636064606560666067606860696070607160726073607460756076607760786079608060816082608360846085608660876088608960906091609260936094609560966097609860996100610161026103610461056106610761086109611061116112611361146115611661176118611961206121612261236124612561266127612861296130613161326133613461356136613761386139614061416142614361446145614661476148614961506151615261536154615561566157615861596160616161626163616461656166616761686169617061716172617361746175617661776178617961806181618261836184618561866187618861896190619161926193619461956196619761986199620062016202620362046205620662076208620962106211621262136214621562166217621862196220622162226223622462256226622762286229623062316232623362346235623662376238623962406241624262436244624562466247624862496250625162526253625462556256625762586259626062616262626362646265626662676268626962706271627262736274627562766277627862796280628162826283628462856286628762886289629062916292629362946295629662976298629963006301630263036304630563066307630863096310631163126313631463156316631763186319632063216322632363246325632663276328632963306331633263336334633563366337633863396340634163426343634463456346634763486349635063516352635363546355635663576358635963606361636263636364636563666367636863696370637163726373637463756376637763786379638063816382638363846385638663876388638963906391639263936394639563966397639863996400640164026403640464056406640764086409641064116412641364146415641664176418641964206421642264236424642564266427642864296430643164326433643464356436643764386439644064416442644364446445644664476448644964506451645264536454645564566457645864596460646164626463646464656466646764686469647064716472647364746475647664776478647964806481648264836484648564866487648864896490649164926493649464956496649764986499650065016502650365046505650665076508650965106511651265136514651565166517651865196520652165226523652465256526652765286529653065316532653365346535653665376538653965406541654265436544654565466547654865496550655165526553655465556556655765586559656065616562656365646565656665676568656965706571657265736574657565766577657865796580658165826583658465856586658765886589659065916592659365946595659665976598659966006601660266036604660566066607660866096610661166126613661466156616661766186619662066216622662366246625662666276628662966306631663266336634663566366637663866396640664166426643664466456646664766486649665066516652665366546655665666576658665966606661666266636664666566666667666866696670667166726673667466756676667766786679668066816682668366846685668666876688668966906691669266936694669566966697669866996700670167026703670467056706670767086709671067116712671367146715671667176718671967206721672267236724672567266727672867296730673167326733673467356736673767386739674067416742674367446745674667476748674967506751675267536754675567566757675867596760676167626763676467656766676767686769677067716772677367746775677667776778677967806781678267836784678567866787678867896790679167926793679467956796679767986799680068016802680368046805680668076808680968106811681268136814681568166817681868196820682168226823682468256826682768286829683068316832683368346835683668376838683968406841684268436844684568466847684868496850685168526853685468556856685768586859686068616862686368646865686668676868686968706871687268736874687568766877687868796880688168826883688468856886688768886889689068916892689368946895689668976898689969006901690269036904690569066907690869096910691169126913691469156916691769186919692069216922692369246925692669276928692969306931693269336934693569366937693869396940694169426943694469456946694769486949695069516952695369546955695669576958695969606961696269636964696569666967696869696970697169726973697469756976697769786979698069816982698369846985698669876988698969906991699269936994699569966997699869997000700170027003700470057006700770087009701070117012701370147015701670177018701970207021702270237024702570267027702870297030703170327033703470357036703770387039704070417042704370447045704670477048704970507051705270537054705570567057705870597060706170627063706470657066706770687069707070717072707370747075707670777078707970807081708270837084708570867087708870897090709170927093709470957096709770987099710071017102710371047105710671077108710971107111711271137114711571167117711871197120712171227123712471257126712771287129713071317132713371347135713671377138713971407141714271437144714571467147714871497150715171527153715471557156715771587159716071617162716371647165716671677168716971707171717271737174717571767177717871797180718171827183718471857186718771887189719071917192719371947195719671977198719972007201720272037204720572067207720872097210721172127213721472157216721772187219722072217222722372247225722672277228722972307231723272337234723572367237723872397240724172427243724472457246724772487249725072517252725372547255725672577258725972607261726272637264726572667267726872697270727172727273727472757276727772787279728072817282728372847285728672877288728972907291729272937294729572967297729872997300730173027303730473057306730773087309731073117312731373147315731673177318731973207321732273237324732573267327732873297330733173327333733473357336733773387339734073417342734373447345734673477348734973507351735273537354735573567357735873597360736173627363736473657366736773687369737073717372737373747375737673777378737973807381738273837384738573867387738873897390739173927393739473957396739773987399740074017402740374047405740674077408740974107411741274137414741574167417741874197420742174227423742474257426742774287429743074317432743374347435743674377438743974407441744274437444744574467447744874497450745174527453745474557456745774587459746074617462746374647465746674677468746974707471747274737474747574767477747874797480748174827483748474857486748774887489749074917492749374947495749674977498749975007501750275037504750575067507750875097510751175127513751475157516751775187519752075217522752375247525752675277528752975307531753275337534753575367537753875397540754175427543754475457546754775487549755075517552755375547555755675577558755975607561756275637564756575667567756875697570757175727573757475757576757775787579758075817582758375847585758675877588758975907591759275937594759575967597759875997600760176027603760476057606760776087609761076117612761376147615761676177618761976207621762276237624762576267627762876297630763176327633763476357636763776387639764076417642764376447645764676477648764976507651765276537654765576567657765876597660766176627663766476657666766776687669767076717672767376747675767676777678767976807681768276837684768576867687768876897690769176927693769476957696769776987699770077017702770377047705770677077708770977107711771277137714771577167717771877197720772177227723772477257726772777287729773077317732773377347735773677377738773977407741774277437744774577467747774877497750775177527753775477557756775777587759776077617762776377647765776677677768776977707771777277737774777577767777777877797780778177827783778477857786778777887789779077917792779377947795779677977798779978007801780278037804780578067807780878097810781178127813781478157816781778187819782078217822782378247825782678277828782978307831783278337834783578367837783878397840784178427843784478457846784778487849785078517852785378547855785678577858785978607861786278637864786578667867786878697870787178727873787478757876787778787879788078817882788378847885788678877888788978907891789278937894789578967897789878997900790179027903790479057906790779087909791079117912791379147915791679177918791979207921792279237924792579267927792879297930793179327933793479357936793779387939794079417942794379447945794679477948794979507951795279537954795579567957795879597960796179627963796479657966796779687969797079717972797379747975797679777978797979807981798279837984798579867987798879897990799179927993799479957996799779987999800080018002800380048005800680078008800980108011801280138014801580168017801880198020802180228023802480258026802780288029803080318032803380348035803680378038803980408041804280438044804580468047 |
- OpenSSL CHANGES
- _______________
- Changes between 0.9.8f and 0.9.8g [19 Oct 2007]
- *) Fix various bugs:
- + Binary incompatibility of ssl_ctx_st structure
- + DTLS interoperation with non-compliant servers
- + Don't call get_session_cb() without proposed session
- + Fix ia64 assembler code
- [Andy Polyakov, Steve Henson]
- Changes between 0.9.8e and 0.9.8f [11 Oct 2007]
- *) DTLS Handshake overhaul. There were longstanding issues with
- OpenSSL DTLS implementation, which were making it impossible for
- RFC 4347 compliant client to communicate with OpenSSL server.
- Unfortunately just fixing these incompatibilities would "cut off"
- pre-0.9.8f clients. To allow for hassle free upgrade post-0.9.8e
- server keeps tolerating non RFC compliant syntax. The opposite is
- not true, 0.9.8f client can not communicate with earlier server.
- This update even addresses CVE-2007-4995.
- [Andy Polyakov]
- *) Changes to avoid need for function casts in OpenSSL: some compilers
- (gcc 4.2 and later) reject their use.
- [Kurt Roeckx <kurt@roeckx.be>, Peter Hartley <pdh@utter.chaos.org.uk>,
- Steve Henson]
-
- *) Add RFC4507 support to OpenSSL. This includes the corrections in
- RFC4507bis. The encrypted ticket format is an encrypted encoded
- SSL_SESSION structure, that way new session features are automatically
- supported.
- If a client application caches session in an SSL_SESSION structure
- support is transparent because tickets are now stored in the encoded
- SSL_SESSION.
-
- The SSL_CTX structure automatically generates keys for ticket
- protection in servers so again support should be possible
- with no application modification.
- If a client or server wishes to disable RFC4507 support then the option
- SSL_OP_NO_TICKET can be set.
- Add a TLS extension debugging callback to allow the contents of any client
- or server extensions to be examined.
- This work was sponsored by Google.
- [Steve Henson]
- *) Add initial support for TLS extensions, specifically for the server_name
- extension so far. The SSL_SESSION, SSL_CTX, and SSL data structures now
- have new members for a host name. The SSL data structure has an
- additional member SSL_CTX *initial_ctx so that new sessions can be
- stored in that context to allow for session resumption, even after the
- SSL has been switched to a new SSL_CTX in reaction to a client's
- server_name extension.
- New functions (subject to change):
- SSL_get_servername()
- SSL_get_servername_type()
- SSL_set_SSL_CTX()
- New CTRL codes and macros (subject to change):
- SSL_CTRL_SET_TLSEXT_SERVERNAME_CB
- - SSL_CTX_set_tlsext_servername_callback()
- SSL_CTRL_SET_TLSEXT_SERVERNAME_ARG
- - SSL_CTX_set_tlsext_servername_arg()
- SSL_CTRL_SET_TLSEXT_HOSTNAME - SSL_set_tlsext_host_name()
- openssl s_client has a new '-servername ...' option.
- openssl s_server has new options '-servername_host ...', '-cert2 ...',
- '-key2 ...', '-servername_fatal' (subject to change). This allows
- testing the HostName extension for a specific single host name ('-cert'
- and '-key' remain fallbacks for handshakes without HostName
- negotiation). If the unrecogninzed_name alert has to be sent, this by
- default is a warning; it becomes fatal with the '-servername_fatal'
- option.
- [Peter Sylvester, Remy Allais, Christophe Renou, Steve Henson]
- *) Add AES and SSE2 assembly language support to VC++ build.
- [Steve Henson]
- *) Mitigate attack on final subtraction in Montgomery reduction.
- [Andy Polyakov]
- *) Fix crypto/ec/ec_mult.c to work properly with scalars of value 0
- (which previously caused an internal error).
- [Bodo Moeller]
- *) Squeeze another 10% out of IGE mode when in != out.
- [Ben Laurie]
- *) AES IGE mode speedup.
- [Dean Gaudet (Google)]
- *) Add the Korean symmetric 128-bit cipher SEED (see
- http://www.kisa.or.kr/kisa/seed/jsp/seed_eng.jsp) and
- add SEED ciphersuites from RFC 4162:
- TLS_RSA_WITH_SEED_CBC_SHA = "SEED-SHA"
- TLS_DHE_DSS_WITH_SEED_CBC_SHA = "DHE-DSS-SEED-SHA"
- TLS_DHE_RSA_WITH_SEED_CBC_SHA = "DHE-RSA-SEED-SHA"
- TLS_DH_anon_WITH_SEED_CBC_SHA = "ADH-SEED-SHA"
- To minimize changes between patchlevels in the OpenSSL 0.9.8
- series, SEED remains excluded from compilation unless OpenSSL
- is configured with 'enable-seed'.
- [KISA, Bodo Moeller]
- *) Mitigate branch prediction attacks, which can be practical if a
- single processor is shared, allowing a spy process to extract
- information. For detailed background information, see
- http://eprint.iacr.org/2007/039 (O. Aciicmez, S. Gueron,
- J.-P. Seifert, "New Branch Prediction Vulnerabilities in OpenSSL
- and Necessary Software Countermeasures"). The core of the change
- are new versions BN_div_no_branch() and
- BN_mod_inverse_no_branch() of BN_div() and BN_mod_inverse(),
- respectively, which are slower, but avoid the security-relevant
- conditional branches. These are automatically called by BN_div()
- and BN_mod_inverse() if the flag BN_FLG_CONSTTIME is set for one
- of the input BIGNUMs. Also, BN_is_bit_set() has been changed to
- remove a conditional branch.
- BN_FLG_CONSTTIME is the new name for the previous
- BN_FLG_EXP_CONSTTIME flag, since it now affects more than just
- modular exponentiation. (Since OpenSSL 0.9.7h, setting this flag
- in the exponent causes BN_mod_exp_mont() to use the alternative
- implementation in BN_mod_exp_mont_consttime().) The old name
- remains as a deprecated alias.
- Similary, RSA_FLAG_NO_EXP_CONSTTIME is replaced by a more general
- RSA_FLAG_NO_CONSTTIME flag since the RSA implementation now uses
- constant-time implementations for more than just exponentiation.
- Here too the old name is kept as a deprecated alias.
- BN_BLINDING_new() will now use BN_dup() for the modulus so that
- the BN_BLINDING structure gets an independent copy of the
- modulus. This means that the previous "BIGNUM *m" argument to
- BN_BLINDING_new() and to BN_BLINDING_create_param() now
- essentially becomes "const BIGNUM *m", although we can't actually
- change this in the header file before 0.9.9. It allows
- RSA_setup_blinding() to use BN_with_flags() on the modulus to
- enable BN_FLG_CONSTTIME.
- [Matthew D Wood (Intel Corp)]
- *) In the SSL/TLS server implementation, be strict about session ID
- context matching (which matters if an application uses a single
- external cache for different purposes). Previously,
- out-of-context reuse was forbidden only if SSL_VERIFY_PEER was
- set. This did ensure strict client verification, but meant that,
- with applications using a single external cache for quite
- different requirements, clients could circumvent ciphersuite
- restrictions for a given session ID context by starting a session
- in a different context.
- [Bodo Moeller]
- *) Include "!eNULL" in SSL_DEFAULT_CIPHER_LIST to make sure that
- a ciphersuite string such as "DEFAULT:RSA" cannot enable
- authentication-only ciphersuites.
- [Bodo Moeller]
- Changes between 0.9.8d and 0.9.8e [23 Feb 2007]
- *) Since AES128 and AES256 (and similarly Camellia128 and
- Camellia256) share a single mask bit in the logic of
- ssl/ssl_ciph.c, the code for masking out disabled ciphers needs a
- kludge to work properly if AES128 is available and AES256 isn't
- (or if Camellia128 is available and Camellia256 isn't).
- [Victor Duchovni]
- *) Fix the BIT STRING encoding generated by crypto/ec/ec_asn1.c
- (within i2d_ECPrivateKey, i2d_ECPKParameters, i2d_ECParameters):
- When a point or a seed is encoded in a BIT STRING, we need to
- prevent the removal of trailing zero bits to get the proper DER
- encoding. (By default, crypto/asn1/a_bitstr.c assumes the case
- of a NamedBitList, for which trailing 0 bits need to be removed.)
- [Bodo Moeller]
- *) Have SSL/TLS server implementation tolerate "mismatched" record
- protocol version while receiving ClientHello even if the
- ClientHello is fragmented. (The server can't insist on the
- particular protocol version it has chosen before the ServerHello
- message has informed the client about his choice.)
- [Bodo Moeller]
- *) Add RFC 3779 support.
- [Rob Austein for ARIN, Ben Laurie]
- *) Load error codes if they are not already present instead of using a
- static variable. This allows them to be cleanly unloaded and reloaded.
- Improve header file function name parsing.
- [Steve Henson]
- *) extend SMTP and IMAP protocol emulation in s_client to use EHLO
- or CAPABILITY handshake as required by RFCs.
- [Goetz Babin-Ebell]
- Changes between 0.9.8c and 0.9.8d [28 Sep 2006]
- *) Introduce limits to prevent malicious keys being able to
- cause a denial of service. (CVE-2006-2940)
- [Steve Henson, Bodo Moeller]
- *) Fix ASN.1 parsing of certain invalid structures that can result
- in a denial of service. (CVE-2006-2937) [Steve Henson]
- *) Fix buffer overflow in SSL_get_shared_ciphers() function.
- (CVE-2006-3738) [Tavis Ormandy and Will Drewry, Google Security Team]
- *) Fix SSL client code which could crash if connecting to a
- malicious SSLv2 server. (CVE-2006-4343)
- [Tavis Ormandy and Will Drewry, Google Security Team]
- *) Since 0.9.8b, ciphersuite strings naming explicit ciphersuites
- match only those. Before that, "AES256-SHA" would be interpreted
- as a pattern and match "AES128-SHA" too (since AES128-SHA got
- the same strength classification in 0.9.7h) as we currently only
- have a single AES bit in the ciphersuite description bitmap.
- That change, however, also applied to ciphersuite strings such as
- "RC4-MD5" that intentionally matched multiple ciphersuites --
- namely, SSL 2.0 ciphersuites in addition to the more common ones
- from SSL 3.0/TLS 1.0.
- So we change the selection algorithm again: Naming an explicit
- ciphersuite selects this one ciphersuite, and any other similar
- ciphersuite (same bitmap) from *other* protocol versions.
- Thus, "RC4-MD5" again will properly select both the SSL 2.0
- ciphersuite and the SSL 3.0/TLS 1.0 ciphersuite.
- Since SSL 2.0 does not have any ciphersuites for which the
- 128/256 bit distinction would be relevant, this works for now.
- The proper fix will be to use different bits for AES128 and
- AES256, which would have avoided the problems from the beginning;
- however, bits are scarce, so we can only do this in a new release
- (not just a patchlevel) when we can change the SSL_CIPHER
- definition to split the single 'unsigned long mask' bitmap into
- multiple values to extend the available space.
- [Bodo Moeller]
- Changes between 0.9.8b and 0.9.8c [05 Sep 2006]
- *) Avoid PKCS #1 v1.5 signature attack discovered by Daniel Bleichenbacher
- (CVE-2006-4339) [Ben Laurie and Google Security Team]
- *) Add AES IGE and biIGE modes.
- [Ben Laurie]
- *) Change the Unix randomness entropy gathering to use poll() when
- possible instead of select(), since the latter has some
- undesirable limitations.
- [Darryl Miles via Richard Levitte and Bodo Moeller]
- *) Disable "ECCdraft" ciphersuites more thoroughly. Now special
- treatment in ssl/ssl_ciph.s makes sure that these ciphersuites
- cannot be implicitly activated as part of, e.g., the "AES" alias.
- However, please upgrade to OpenSSL 0.9.9[-dev] for
- non-experimental use of the ECC ciphersuites to get TLS extension
- support, which is required for curve and point format negotiation
- to avoid potential handshake problems.
- [Bodo Moeller]
- *) Disable rogue ciphersuites:
- - SSLv2 0x08 0x00 0x80 ("RC4-64-MD5")
- - SSLv3/TLSv1 0x00 0x61 ("EXP1024-RC2-CBC-MD5")
- - SSLv3/TLSv1 0x00 0x60 ("EXP1024-RC4-MD5")
- The latter two were purportedly from
- draft-ietf-tls-56-bit-ciphersuites-0[01].txt, but do not really
- appear there.
- Also deactivate the remaining ciphersuites from
- draft-ietf-tls-56-bit-ciphersuites-01.txt. These are just as
- unofficial, and the ID has long expired.
- [Bodo Moeller]
- *) Fix RSA blinding Heisenbug (problems sometimes occured on
- dual-core machines) and other potential thread-safety issues.
- [Bodo Moeller]
- *) Add the symmetric cipher Camellia (128-bit, 192-bit, 256-bit key
- versions), which is now available for royalty-free use
- (see http://info.isl.ntt.co.jp/crypt/eng/info/chiteki.html).
- Also, add Camellia TLS ciphersuites from RFC 4132.
- To minimize changes between patchlevels in the OpenSSL 0.9.8
- series, Camellia remains excluded from compilation unless OpenSSL
- is configured with 'enable-camellia'.
- [NTT]
- *) Disable the padding bug check when compression is in use. The padding
- bug check assumes the first packet is of even length, this is not
- necessarily true if compresssion is enabled and can result in false
- positives causing handshake failure. The actual bug test is ancient
- code so it is hoped that implementations will either have fixed it by
- now or any which still have the bug do not support compression.
- [Steve Henson]
- Changes between 0.9.8a and 0.9.8b [04 May 2006]
- *) When applying a cipher rule check to see if string match is an explicit
- cipher suite and only match that one cipher suite if it is.
- [Steve Henson]
- *) Link in manifests for VC++ if needed.
- [Austin Ziegler <halostatue@gmail.com>]
- *) Update support for ECC-based TLS ciphersuites according to
- draft-ietf-tls-ecc-12.txt with proposed changes (but without
- TLS extensions, which are supported starting with the 0.9.9
- branch, not in the OpenSSL 0.9.8 branch).
- [Douglas Stebila]
- *) New functions EVP_CIPHER_CTX_new() and EVP_CIPHER_CTX_free() to support
- opaque EVP_CIPHER_CTX handling.
- [Steve Henson]
- *) Fixes and enhancements to zlib compression code. We now only use
- "zlib1.dll" and use the default __cdecl calling convention on Win32
- to conform with the standards mentioned here:
- http://www.zlib.net/DLL_FAQ.txt
- Static zlib linking now works on Windows and the new --with-zlib-include
- --with-zlib-lib options to Configure can be used to supply the location
- of the headers and library. Gracefully handle case where zlib library
- can't be loaded.
- [Steve Henson]
- *) Several fixes and enhancements to the OID generation code. The old code
- sometimes allowed invalid OIDs (1.X for X >= 40 for example), couldn't
- handle numbers larger than ULONG_MAX, truncated printing and had a
- non standard OBJ_obj2txt() behaviour.
- [Steve Henson]
- *) Add support for building of engines under engine/ as shared libraries
- under VC++ build system.
- [Steve Henson]
- *) Corrected the numerous bugs in the Win32 path splitter in DSO.
- Hopefully, we will not see any false combination of paths any more.
- [Richard Levitte]
- Changes between 0.9.8 and 0.9.8a [11 Oct 2005]
- *) Remove the functionality of SSL_OP_MSIE_SSLV2_RSA_PADDING
- (part of SSL_OP_ALL). This option used to disable the
- countermeasure against man-in-the-middle protocol-version
- rollback in the SSL 2.0 server implementation, which is a bad
- idea. (CVE-2005-2969)
- [Bodo Moeller; problem pointed out by Yutaka Oiwa (Research Center
- for Information Security, National Institute of Advanced Industrial
- Science and Technology [AIST], Japan)]
- *) Add two function to clear and return the verify parameter flags.
- [Steve Henson]
- *) Keep cipherlists sorted in the source instead of sorting them at
- runtime, thus removing the need for a lock.
- [Nils Larsch]
- *) Avoid some small subgroup attacks in Diffie-Hellman.
- [Nick Mathewson and Ben Laurie]
- *) Add functions for well-known primes.
- [Nick Mathewson]
- *) Extended Windows CE support.
- [Satoshi Nakamura and Andy Polyakov]
- *) Initialize SSL_METHOD structures at compile time instead of during
- runtime, thus removing the need for a lock.
- [Steve Henson]
- *) Make PKCS7_decrypt() work even if no certificate is supplied by
- attempting to decrypt each encrypted key in turn. Add support to
- smime utility.
- [Steve Henson]
- Changes between 0.9.7h and 0.9.8 [05 Jul 2005]
- [NB: OpenSSL 0.9.7i and later 0.9.7 patch levels were released after
- OpenSSL 0.9.8.]
- *) Add libcrypto.pc and libssl.pc for those who feel they need them.
- [Richard Levitte]
- *) Change CA.sh and CA.pl so they don't bundle the CSR and the private
- key into the same file any more.
- [Richard Levitte]
- *) Add initial support for Win64, both IA64 and AMD64/x64 flavors.
- [Andy Polyakov]
- *) Add -utf8 command line and config file option to 'ca'.
- [Stefan <stf@udoma.org]
- *) Removed the macro des_crypt(), as it seems to conflict with some
- libraries. Use DES_crypt().
- [Richard Levitte]
- *) Correct naming of the 'chil' and '4758cca' ENGINEs. This
- involves renaming the source and generated shared-libs for
- both. The engines will accept the corrected or legacy ids
- ('ncipher' and '4758_cca' respectively) when binding. NB,
- this only applies when building 'shared'.
- [Corinna Vinschen <vinschen@redhat.com> and Geoff Thorpe]
- *) Add attribute functions to EVP_PKEY structure. Modify
- PKCS12_create() to recognize a CSP name attribute and
- use it. Make -CSP option work again in pkcs12 utility.
- [Steve Henson]
- *) Add new functionality to the bn blinding code:
- - automatic re-creation of the BN_BLINDING parameters after
- a fixed number of uses (currently 32)
- - add new function for parameter creation
- - introduce flags to control the update behaviour of the
- BN_BLINDING parameters
- - hide BN_BLINDING structure
- Add a second BN_BLINDING slot to the RSA structure to improve
- performance when a single RSA object is shared among several
- threads.
- [Nils Larsch]
- *) Add support for DTLS.
- [Nagendra Modadugu <nagendra@cs.stanford.edu> and Ben Laurie]
- *) Add support for DER encoded private keys (SSL_FILETYPE_ASN1)
- to SSL_CTX_use_PrivateKey_file() and SSL_use_PrivateKey_file()
- [Walter Goulet]
- *) Remove buggy and incompletet DH cert support from
- ssl/ssl_rsa.c and ssl/s3_both.c
- [Nils Larsch]
- *) Use SHA-1 instead of MD5 as the default digest algorithm for
- the apps/openssl applications.
- [Nils Larsch]
- *) Compile clean with "-Wall -Wmissing-prototypes
- -Wstrict-prototypes -Wmissing-declarations -Werror". Currently
- DEBUG_SAFESTACK must also be set.
- [Ben Laurie]
- *) Change ./Configure so that certain algorithms can be disabled by default.
- The new counterpiece to "no-xxx" is "enable-xxx".
- The patented RC5 and MDC2 algorithms will now be disabled unless
- "enable-rc5" and "enable-mdc2", respectively, are specified.
- (IDEA remains enabled despite being patented. This is because IDEA
- is frequently required for interoperability, and there is no license
- fee for non-commercial use. As before, "no-idea" can be used to
- avoid this algorithm.)
- [Bodo Moeller]
- *) Add processing of proxy certificates (see RFC 3820). This work was
- sponsored by KTH (The Royal Institute of Technology in Stockholm) and
- EGEE (Enabling Grids for E-science in Europe).
- [Richard Levitte]
- *) RC4 performance overhaul on modern architectures/implementations, such
- as Intel P4, IA-64 and AMD64.
- [Andy Polyakov]
- *) New utility extract-section.pl. This can be used specify an alternative
- section number in a pod file instead of having to treat each file as
- a separate case in Makefile. This can be done by adding two lines to the
- pod file:
- =for comment openssl_section:XXX
- The blank line is mandatory.
- [Steve Henson]
- *) New arguments -certform, -keyform and -pass for s_client and s_server
- to allow alternative format key and certificate files and passphrase
- sources.
- [Steve Henson]
- *) New structure X509_VERIFY_PARAM which combines current verify parameters,
- update associated structures and add various utility functions.
- Add new policy related verify parameters, include policy checking in
- standard verify code. Enhance 'smime' application with extra parameters
- to support policy checking and print out.
- [Steve Henson]
- *) Add a new engine to support VIA PadLock ACE extensions in the VIA C3
- Nehemiah processors. These extensions support AES encryption in hardware
- as well as RNG (though RNG support is currently disabled).
- [Michal Ludvig <michal@logix.cz>, with help from Andy Polyakov]
- *) Deprecate BN_[get|set]_params() functions (they were ignored internally).
- [Geoff Thorpe]
- *) New FIPS 180-2 algorithms, SHA-224/-256/-384/-512 are implemented.
- [Andy Polyakov and a number of other people]
- *) Improved PowerPC platform support. Most notably BIGNUM assembler
- implementation contributed by IBM.
- [Suresh Chari, Peter Waltenberg, Andy Polyakov]
- *) The new 'RSA_generate_key_ex' function now takes a BIGNUM for the public
- exponent rather than 'unsigned long'. There is a corresponding change to
- the new 'rsa_keygen' element of the RSA_METHOD structure.
- [Jelte Jansen, Geoff Thorpe]
- *) Functionality for creating the initial serial number file is now
- moved from CA.pl to the 'ca' utility with a new option -create_serial.
- (Before OpenSSL 0.9.7e, CA.pl used to initialize the serial
- number file to 1, which is bound to cause problems. To avoid
- the problems while respecting compatibility between different 0.9.7
- patchlevels, 0.9.7e employed 'openssl x509 -next_serial' in
- CA.pl for serial number initialization. With the new release 0.9.8,
- we can fix the problem directly in the 'ca' utility.)
- [Steve Henson]
- *) Reduced header interdepencies by declaring more opaque objects in
- ossl_typ.h. As a consequence, including some headers (eg. engine.h) will
- give fewer recursive includes, which could break lazy source code - so
- this change is covered by the OPENSSL_NO_DEPRECATED symbol. As always,
- developers should define this symbol when building and using openssl to
- ensure they track the recommended behaviour, interfaces, [etc], but
- backwards-compatible behaviour prevails when this isn't defined.
- [Geoff Thorpe]
- *) New function X509_POLICY_NODE_print() which prints out policy nodes.
- [Steve Henson]
- *) Add new EVP function EVP_CIPHER_CTX_rand_key and associated functionality.
- This will generate a random key of the appropriate length based on the
- cipher context. The EVP_CIPHER can provide its own random key generation
- routine to support keys of a specific form. This is used in the des and
- 3des routines to generate a key of the correct parity. Update S/MIME
- code to use new functions and hence generate correct parity DES keys.
- Add EVP_CHECK_DES_KEY #define to return an error if the key is not
- valid (weak or incorrect parity).
- [Steve Henson]
- *) Add a local set of CRLs that can be used by X509_verify_cert() as well
- as looking them up. This is useful when the verified structure may contain
- CRLs, for example PKCS#7 signedData. Modify PKCS7_verify() to use any CRLs
- present unless the new PKCS7_NO_CRL flag is asserted.
- [Steve Henson]
- *) Extend ASN1 oid configuration module. It now additionally accepts the
- syntax:
- shortName = some long name, 1.2.3.4
- [Steve Henson]
- *) Reimplemented the BN_CTX implementation. There is now no more static
- limitation on the number of variables it can handle nor the depth of the
- "stack" handling for BN_CTX_start()/BN_CTX_end() pairs. The stack
- information can now expand as required, and rather than having a single
- static array of bignums, BN_CTX now uses a linked-list of such arrays
- allowing it to expand on demand whilst maintaining the usefulness of
- BN_CTX's "bundling".
- [Geoff Thorpe]
- *) Add a missing BN_CTX parameter to the 'rsa_mod_exp' callback in RSA_METHOD
- to allow all RSA operations to function using a single BN_CTX.
- [Geoff Thorpe]
- *) Preliminary support for certificate policy evaluation and checking. This
- is initially intended to pass the tests outlined in "Conformance Testing
- of Relying Party Client Certificate Path Processing Logic" v1.07.
- [Steve Henson]
- *) bn_dup_expand() has been deprecated, it was introduced in 0.9.7 and
- remained unused and not that useful. A variety of other little bignum
- tweaks and fixes have also been made continuing on from the audit (see
- below).
- [Geoff Thorpe]
- *) Constify all or almost all d2i, c2i, s2i and r2i functions, along with
- associated ASN1, EVP and SSL functions and old ASN1 macros.
- [Richard Levitte]
- *) BN_zero() only needs to set 'top' and 'neg' to zero for correct results,
- and this should never fail. So the return value from the use of
- BN_set_word() (which can fail due to needless expansion) is now deprecated;
- if OPENSSL_NO_DEPRECATED is defined, BN_zero() is a void macro.
- [Geoff Thorpe]
- *) BN_CTX_get() should return zero-valued bignums, providing the same
- initialised value as BN_new().
- [Geoff Thorpe, suggested by Ulf Möller]
- *) Support for inhibitAnyPolicy certificate extension.
- [Steve Henson]
- *) An audit of the BIGNUM code is underway, for which debugging code is
- enabled when BN_DEBUG is defined. This makes stricter enforcements on what
- is considered valid when processing BIGNUMs, and causes execution to
- assert() when a problem is discovered. If BN_DEBUG_RAND is defined,
- further steps are taken to deliberately pollute unused data in BIGNUM
- structures to try and expose faulty code further on. For now, openssl will
- (in its default mode of operation) continue to tolerate the inconsistent
- forms that it has tolerated in the past, but authors and packagers should
- consider trying openssl and their own applications when compiled with
- these debugging symbols defined. It will help highlight potential bugs in
- their own code, and will improve the test coverage for OpenSSL itself. At
- some point, these tighter rules will become openssl's default to improve
- maintainability, though the assert()s and other overheads will remain only
- in debugging configurations. See bn.h for more details.
- [Geoff Thorpe, Nils Larsch, Ulf Möller]
- *) BN_CTX_init() has been deprecated, as BN_CTX is an opaque structure
- that can only be obtained through BN_CTX_new() (which implicitly
- initialises it). The presence of this function only made it possible
- to overwrite an existing structure (and cause memory leaks).
- [Geoff Thorpe]
- *) Because of the callback-based approach for implementing LHASH as a
- template type, lh_insert() adds opaque objects to hash-tables and
- lh_doall() or lh_doall_arg() are typically used with a destructor callback
- to clean up those corresponding objects before destroying the hash table
- (and losing the object pointers). So some over-zealous constifications in
- LHASH have been relaxed so that lh_insert() does not take (nor store) the
- objects as "const" and the lh_doall[_arg] callback wrappers are not
- prototyped to have "const" restrictions on the object pointers they are
- given (and so aren't required to cast them away any more).
- [Geoff Thorpe]
- *) The tmdiff.h API was so ugly and minimal that our own timing utility
- (speed) prefers to use its own implementation. The two implementations
- haven't been consolidated as yet (volunteers?) but the tmdiff API has had
- its object type properly exposed (MS_TM) instead of casting to/from "char
- *". This may still change yet if someone realises MS_TM and "ms_time_***"
- aren't necessarily the greatest nomenclatures - but this is what was used
- internally to the implementation so I've used that for now.
- [Geoff Thorpe]
- *) Ensure that deprecated functions do not get compiled when
- OPENSSL_NO_DEPRECATED is defined. Some "openssl" subcommands and a few of
- the self-tests were still using deprecated key-generation functions so
- these have been updated also.
- [Geoff Thorpe]
- *) Reorganise PKCS#7 code to separate the digest location functionality
- into PKCS7_find_digest(), digest addtion into PKCS7_bio_add_digest().
- New function PKCS7_set_digest() to set the digest type for PKCS#7
- digestedData type. Add additional code to correctly generate the
- digestedData type and add support for this type in PKCS7 initialization
- functions.
- [Steve Henson]
- *) New function PKCS7_set0_type_other() this initializes a PKCS7
- structure of type "other".
- [Steve Henson]
- *) Fix prime generation loop in crypto/bn/bn_prime.pl by making
- sure the loop does correctly stop and breaking ("division by zero")
- modulus operations are not performed. The (pre-generated) prime
- table crypto/bn/bn_prime.h was already correct, but it could not be
- re-generated on some platforms because of the "division by zero"
- situation in the script.
- [Ralf S. Engelschall]
- *) Update support for ECC-based TLS ciphersuites according to
- draft-ietf-tls-ecc-03.txt: the KDF1 key derivation function with
- SHA-1 now is only used for "small" curves (where the
- representation of a field element takes up to 24 bytes); for
- larger curves, the field element resulting from ECDH is directly
- used as premaster secret.
- [Douglas Stebila (Sun Microsystems Laboratories)]
- *) Add code for kP+lQ timings to crypto/ec/ectest.c, and add SEC2
- curve secp160r1 to the tests.
- [Douglas Stebila (Sun Microsystems Laboratories)]
- *) Add the possibility to load symbols globally with DSO.
- [Götz Babin-Ebell <babin-ebell@trustcenter.de> via Richard Levitte]
- *) Add the functions ERR_set_mark() and ERR_pop_to_mark() for better
- control of the error stack.
- [Richard Levitte]
- *) Add support for STORE in ENGINE.
- [Richard Levitte]
- *) Add the STORE type. The intention is to provide a common interface
- to certificate and key stores, be they simple file-based stores, or
- HSM-type store, or LDAP stores, or...
- NOTE: The code is currently UNTESTED and isn't really used anywhere.
- [Richard Levitte]
- *) Add a generic structure called OPENSSL_ITEM. This can be used to
- pass a list of arguments to any function as well as provide a way
- for a function to pass data back to the caller.
- [Richard Levitte]
- *) Add the functions BUF_strndup() and BUF_memdup(). BUF_strndup()
- works like BUF_strdup() but can be used to duplicate a portion of
- a string. The copy gets NUL-terminated. BUF_memdup() duplicates
- a memory area.
- [Richard Levitte]
- *) Add the function sk_find_ex() which works like sk_find(), but will
- return an index to an element even if an exact match couldn't be
- found. The index is guaranteed to point at the element where the
- searched-for key would be inserted to preserve sorting order.
- [Richard Levitte]
- *) Add the function OBJ_bsearch_ex() which works like OBJ_bsearch() but
- takes an extra flags argument for optional functionality. Currently,
- the following flags are defined:
- OBJ_BSEARCH_VALUE_ON_NOMATCH
- This one gets OBJ_bsearch_ex() to return a pointer to the first
- element where the comparing function returns a negative or zero
- number.
- OBJ_BSEARCH_FIRST_VALUE_ON_MATCH
- This one gets OBJ_bsearch_ex() to return a pointer to the first
- element where the comparing function returns zero. This is useful
- if there are more than one element where the comparing function
- returns zero.
- [Richard Levitte]
- *) Make it possible to create self-signed certificates with 'openssl ca'
- in such a way that the self-signed certificate becomes part of the
- CA database and uses the same mechanisms for serial number generation
- as all other certificate signing. The new flag '-selfsign' enables
- this functionality. Adapt CA.sh and CA.pl.in.
- [Richard Levitte]
- *) Add functionality to check the public key of a certificate request
- against a given private. This is useful to check that a certificate
- request can be signed by that key (self-signing).
- [Richard Levitte]
- *) Make it possible to have multiple active certificates with the same
- subject in the CA index file. This is done only if the keyword
- 'unique_subject' is set to 'no' in the main CA section (default
- if 'CA_default') of the configuration file. The value is saved
- with the database itself in a separate index attribute file,
- named like the index file with '.attr' appended to the name.
- [Richard Levitte]
- *) Generate muti valued AVAs using '+' notation in config files for
- req and dirName.
- [Steve Henson]
- *) Support for nameConstraints certificate extension.
- [Steve Henson]
- *) Support for policyConstraints certificate extension.
- [Steve Henson]
- *) Support for policyMappings certificate extension.
- [Steve Henson]
- *) Make sure the default DSA_METHOD implementation only uses its
- dsa_mod_exp() and/or bn_mod_exp() handlers if they are non-NULL,
- and change its own handlers to be NULL so as to remove unnecessary
- indirection. This lets alternative implementations fallback to the
- default implementation more easily.
- [Geoff Thorpe]
- *) Support for directoryName in GeneralName related extensions
- in config files.
- [Steve Henson]
- *) Make it possible to link applications using Makefile.shared.
- Make that possible even when linking against static libraries!
- [Richard Levitte]
- *) Support for single pass processing for S/MIME signing. This now
- means that S/MIME signing can be done from a pipe, in addition
- cleartext signing (multipart/signed type) is effectively streaming
- and the signed data does not need to be all held in memory.
- This is done with a new flag PKCS7_STREAM. When this flag is set
- PKCS7_sign() only initializes the PKCS7 structure and the actual signing
- is done after the data is output (and digests calculated) in
- SMIME_write_PKCS7().
- [Steve Henson]
- *) Add full support for -rpath/-R, both in shared libraries and
- applications, at least on the platforms where it's known how
- to do it.
- [Richard Levitte]
- *) In crypto/ec/ec_mult.c, implement fast point multiplication with
- precomputation, based on wNAF splitting: EC_GROUP_precompute_mult()
- will now compute a table of multiples of the generator that
- makes subsequent invocations of EC_POINTs_mul() or EC_POINT_mul()
- faster (notably in the case of a single point multiplication,
- scalar * generator).
- [Nils Larsch, Bodo Moeller]
- *) IPv6 support for certificate extensions. The various extensions
- which use the IP:a.b.c.d can now take IPv6 addresses using the
- formats of RFC1884 2.2 . IPv6 addresses are now also displayed
- correctly.
- [Steve Henson]
- *) Added an ENGINE that implements RSA by performing private key
- exponentiations with the GMP library. The conversions to and from
- GMP's mpz_t format aren't optimised nor are any montgomery forms
- cached, and on x86 it appears OpenSSL's own performance has caught up.
- However there are likely to be other architectures where GMP could
- provide a boost. This ENGINE is not built in by default, but it can be
- specified at Configure time and should be accompanied by the necessary
- linker additions, eg;
- ./config -DOPENSSL_USE_GMP -lgmp
- [Geoff Thorpe]
- *) "openssl engine" will not display ENGINE/DSO load failure errors when
- testing availability of engines with "-t" - the old behaviour is
- produced by increasing the feature's verbosity with "-tt".
- [Geoff Thorpe]
- *) ECDSA routines: under certain error conditions uninitialized BN objects
- could be freed. Solution: make sure initialization is performed early
- enough. (Reported and fix supplied by Nils Larsch <nla@trustcenter.de>
- via PR#459)
- [Lutz Jaenicke]
- *) Key-generation can now be implemented in RSA_METHOD, DSA_METHOD
- and DH_METHOD (eg. by ENGINE implementations) to override the normal
- software implementations. For DSA and DH, parameter generation can
- also be overriden by providing the appropriate method callbacks.
- [Geoff Thorpe]
- *) Change the "progress" mechanism used in key-generation and
- primality testing to functions that take a new BN_GENCB pointer in
- place of callback/argument pairs. The new API functions have "_ex"
- postfixes and the older functions are reimplemented as wrappers for
- the new ones. The OPENSSL_NO_DEPRECATED symbol can be used to hide
- declarations of the old functions to help (graceful) attempts to
- migrate to the new functions. Also, the new key-generation API
- functions operate on a caller-supplied key-structure and return
- success/failure rather than returning a key or NULL - this is to
- help make "keygen" another member function of RSA_METHOD etc.
- Example for using the new callback interface:
- int (*my_callback)(int a, int b, BN_GENCB *cb) = ...;
- void *my_arg = ...;
- BN_GENCB my_cb;
- BN_GENCB_set(&my_cb, my_callback, my_arg);
- return BN_is_prime_ex(some_bignum, BN_prime_checks, NULL, &cb);
- /* For the meaning of a, b in calls to my_callback(), see the
- * documentation of the function that calls the callback.
- * cb will point to my_cb; my_arg can be retrieved as cb->arg.
- * my_callback should return 1 if it wants BN_is_prime_ex()
- * to continue, or 0 to stop.
- */
- [Geoff Thorpe]
- *) Change the ZLIB compression method to be stateful, and make it
- available to TLS with the number defined in
- draft-ietf-tls-compression-04.txt.
- [Richard Levitte]
- *) Add the ASN.1 structures and functions for CertificatePair, which
- is defined as follows (according to X.509_4thEditionDraftV6.pdf):
- CertificatePair ::= SEQUENCE {
- forward [0] Certificate OPTIONAL,
- reverse [1] Certificate OPTIONAL,
- -- at least one of the pair shall be present -- }
- Also implement the PEM functions to read and write certificate
- pairs, and defined the PEM tag as "CERTIFICATE PAIR".
- This needed to be defined, mostly for the sake of the LDAP
- attribute crossCertificatePair, but may prove useful elsewhere as
- well.
- [Richard Levitte]
- *) Make it possible to inhibit symlinking of shared libraries in
- Makefile.shared, for Cygwin's sake.
- [Richard Levitte]
- *) Extend the BIGNUM API by creating a function
- void BN_set_negative(BIGNUM *a, int neg);
- and a macro that behave like
- int BN_is_negative(const BIGNUM *a);
- to avoid the need to access 'a->neg' directly in applications.
- [Nils Larsch]
- *) Implement fast modular reduction for pseudo-Mersenne primes
- used in NIST curves (crypto/bn/bn_nist.c, crypto/ec/ecp_nist.c).
- EC_GROUP_new_curve_GFp() will now automatically use this
- if applicable.
- [Nils Larsch <nla@trustcenter.de>]
- *) Add new lock type (CRYPTO_LOCK_BN).
- [Bodo Moeller]
- *) Change the ENGINE framework to automatically load engines
- dynamically from specific directories unless they could be
- found to already be built in or loaded. Move all the
- current engines except for the cryptodev one to a new
- directory engines/.
- The engines in engines/ are built as shared libraries if
- the "shared" options was given to ./Configure or ./config.
- Otherwise, they are inserted in libcrypto.a.
- /usr/local/ssl/engines is the default directory for dynamic
- engines, but that can be overriden at configure time through
- the usual use of --prefix and/or --openssldir, and at run
- time with the environment variable OPENSSL_ENGINES.
- [Geoff Thorpe and Richard Levitte]
- *) Add Makefile.shared, a helper makefile to build shared
- libraries. Addapt Makefile.org.
- [Richard Levitte]
- *) Add version info to Win32 DLLs.
- [Peter 'Luna' Runestig" <peter@runestig.com>]
- *) Add new 'medium level' PKCS#12 API. Certificates and keys
- can be added using this API to created arbitrary PKCS#12
- files while avoiding the low level API.
- New options to PKCS12_create(), key or cert can be NULL and
- will then be omitted from the output file. The encryption
- algorithm NIDs can be set to -1 for no encryption, the mac
- iteration count can be set to 0 to omit the mac.
- Enhance pkcs12 utility by making the -nokeys and -nocerts
- options work when creating a PKCS#12 file. New option -nomac
- to omit the mac, NONE can be set for an encryption algorithm.
- New code is modified to use the enhanced PKCS12_create()
- instead of the low level API.
- [Steve Henson]
- *) Extend ASN1 encoder to support indefinite length constructed
- encoding. This can output sequences tags and octet strings in
- this form. Modify pk7_asn1.c to support indefinite length
- encoding. This is experimental and needs additional code to
- be useful, such as an ASN1 bio and some enhanced streaming
- PKCS#7 code.
- Extend template encode functionality so that tagging is passed
- down to the template encoder.
- [Steve Henson]
- *) Let 'openssl req' fail if an argument to '-newkey' is not
- recognized instead of using RSA as a default.
- [Bodo Moeller]
- *) Add support for ECC-based ciphersuites from draft-ietf-tls-ecc-01.txt.
- As these are not official, they are not included in "ALL";
- the "ECCdraft" ciphersuite group alias can be used to select them.
- [Vipul Gupta and Sumit Gupta (Sun Microsystems Laboratories)]
- *) Add ECDH engine support.
- [Nils Gura and Douglas Stebila (Sun Microsystems Laboratories)]
- *) Add ECDH in new directory crypto/ecdh/.
- [Douglas Stebila (Sun Microsystems Laboratories)]
- *) Let BN_rand_range() abort with an error after 100 iterations
- without success (which indicates a broken PRNG).
- [Bodo Moeller]
- *) Change BN_mod_sqrt() so that it verifies that the input value
- is really the square of the return value. (Previously,
- BN_mod_sqrt would show GIGO behaviour.)
- [Bodo Moeller]
- *) Add named elliptic curves over binary fields from X9.62, SECG,
- and WAP/WTLS; add OIDs that were still missing.
- [Sheueling Chang Shantz and Douglas Stebila
- (Sun Microsystems Laboratories)]
- *) Extend the EC library for elliptic curves over binary fields
- (new files ec2_smpl.c, ec2_smpt.c, ec2_mult.c in crypto/ec/).
- New EC_METHOD:
- EC_GF2m_simple_method
- New API functions:
- EC_GROUP_new_curve_GF2m
- EC_GROUP_set_curve_GF2m
- EC_GROUP_get_curve_GF2m
- EC_POINT_set_affine_coordinates_GF2m
- EC_POINT_get_affine_coordinates_GF2m
- EC_POINT_set_compressed_coordinates_GF2m
- Point compression for binary fields is disabled by default for
- patent reasons (compile with OPENSSL_EC_BIN_PT_COMP defined to
- enable it).
- As binary polynomials are represented as BIGNUMs, various members
- of the EC_GROUP and EC_POINT data structures can be shared
- between the implementations for prime fields and binary fields;
- the above ..._GF2m functions (except for EX_GROUP_new_curve_GF2m)
- are essentially identical to their ..._GFp counterparts.
- (For simplicity, the '..._GFp' prefix has been dropped from
- various internal method names.)
- An internal 'field_div' method (similar to 'field_mul' and
- 'field_sqr') has been added; this is used only for binary fields.
- [Sheueling Chang Shantz and Douglas Stebila
- (Sun Microsystems Laboratories)]
- *) Optionally dispatch EC_POINT_mul(), EC_POINT_precompute_mult()
- through methods ('mul', 'precompute_mult').
- The generic implementations (now internally called 'ec_wNAF_mul'
- and 'ec_wNAF_precomputed_mult') remain the default if these
- methods are undefined.
- [Sheueling Chang Shantz and Douglas Stebila
- (Sun Microsystems Laboratories)]
- *) New function EC_GROUP_get_degree, which is defined through
- EC_METHOD. For curves over prime fields, this returns the bit
- length of the modulus.
- [Sheueling Chang Shantz and Douglas Stebila
- (Sun Microsystems Laboratories)]
- *) New functions EC_GROUP_dup, EC_POINT_dup.
- (These simply call ..._new and ..._copy).
- [Sheueling Chang Shantz and Douglas Stebila
- (Sun Microsystems Laboratories)]
- *) Add binary polynomial arithmetic software in crypto/bn/bn_gf2m.c.
- Polynomials are represented as BIGNUMs (where the sign bit is not
- used) in the following functions [macros]:
- BN_GF2m_add
- BN_GF2m_sub [= BN_GF2m_add]
- BN_GF2m_mod [wrapper for BN_GF2m_mod_arr]
- BN_GF2m_mod_mul [wrapper for BN_GF2m_mod_mul_arr]
- BN_GF2m_mod_sqr [wrapper for BN_GF2m_mod_sqr_arr]
- BN_GF2m_mod_inv
- BN_GF2m_mod_exp [wrapper for BN_GF2m_mod_exp_arr]
- BN_GF2m_mod_sqrt [wrapper for BN_GF2m_mod_sqrt_arr]
- BN_GF2m_mod_solve_quad [wrapper for BN_GF2m_mod_solve_quad_arr]
- BN_GF2m_cmp [= BN_ucmp]
- (Note that only the 'mod' functions are actually for fields GF(2^m).
- BN_GF2m_add() is misnomer, but this is for the sake of consistency.)
- For some functions, an the irreducible polynomial defining a
- field can be given as an 'unsigned int[]' with strictly
- decreasing elements giving the indices of those bits that are set;
- i.e., p[] represents the polynomial
- f(t) = t^p[0] + t^p[1] + ... + t^p[k]
- where
- p[0] > p[1] > ... > p[k] = 0.
- This applies to the following functions:
- BN_GF2m_mod_arr
- BN_GF2m_mod_mul_arr
- BN_GF2m_mod_sqr_arr
- BN_GF2m_mod_inv_arr [wrapper for BN_GF2m_mod_inv]
- BN_GF2m_mod_div_arr [wrapper for BN_GF2m_mod_div]
- BN_GF2m_mod_exp_arr
- BN_GF2m_mod_sqrt_arr
- BN_GF2m_mod_solve_quad_arr
- BN_GF2m_poly2arr
- BN_GF2m_arr2poly
- Conversion can be performed by the following functions:
- BN_GF2m_poly2arr
- BN_GF2m_arr2poly
- bntest.c has additional tests for binary polynomial arithmetic.
- Two implementations for BN_GF2m_mod_div() are available.
- The default algorithm simply uses BN_GF2m_mod_inv() and
- BN_GF2m_mod_mul(). The alternative algorithm is compiled in only
- if OPENSSL_SUN_GF2M_DIV is defined (patent pending; read the
- copyright notice in crypto/bn/bn_gf2m.c before enabling it).
- [Sheueling Chang Shantz and Douglas Stebila
- (Sun Microsystems Laboratories)]
- *) Add new error code 'ERR_R_DISABLED' that can be used when some
- functionality is disabled at compile-time.
- [Douglas Stebila <douglas.stebila@sun.com>]
- *) Change default behaviour of 'openssl asn1parse' so that more
- information is visible when viewing, e.g., a certificate:
- Modify asn1_parse2 (crypto/asn1/asn1_par.c) so that in non-'dump'
- mode the content of non-printable OCTET STRINGs is output in a
- style similar to INTEGERs, but with '[HEX DUMP]' prepended to
- avoid the appearance of a printable string.
- [Nils Larsch <nla@trustcenter.de>]
- *) Add 'asn1_flag' and 'asn1_form' member to EC_GROUP with access
- functions
- EC_GROUP_set_asn1_flag()
- EC_GROUP_get_asn1_flag()
- EC_GROUP_set_point_conversion_form()
- EC_GROUP_get_point_conversion_form()
- These control ASN1 encoding details:
- - Curves (i.e., groups) are encoded explicitly unless asn1_flag
- has been set to OPENSSL_EC_NAMED_CURVE.
- - Points are encoded in uncompressed form by default; options for
- asn1_for are as for point2oct, namely
- POINT_CONVERSION_COMPRESSED
- POINT_CONVERSION_UNCOMPRESSED
- POINT_CONVERSION_HYBRID
- Also add 'seed' and 'seed_len' members to EC_GROUP with access
- functions
- EC_GROUP_set_seed()
- EC_GROUP_get0_seed()
- EC_GROUP_get_seed_len()
- This is used only for ASN1 purposes (so far).
- [Nils Larsch <nla@trustcenter.de>]
- *) Add 'field_type' member to EC_METHOD, which holds the NID
- of the appropriate field type OID. The new function
- EC_METHOD_get_field_type() returns this value.
- [Nils Larsch <nla@trustcenter.de>]
- *) Add functions
- EC_POINT_point2bn()
- EC_POINT_bn2point()
- EC_POINT_point2hex()
- EC_POINT_hex2point()
- providing useful interfaces to EC_POINT_point2oct() and
- EC_POINT_oct2point().
- [Nils Larsch <nla@trustcenter.de>]
- *) Change internals of the EC library so that the functions
- EC_GROUP_set_generator()
- EC_GROUP_get_generator()
- EC_GROUP_get_order()
- EC_GROUP_get_cofactor()
- are implemented directly in crypto/ec/ec_lib.c and not dispatched
- to methods, which would lead to unnecessary code duplication when
- adding different types of curves.
- [Nils Larsch <nla@trustcenter.de> with input by Bodo Moeller]
- *) Implement compute_wNAF (crypto/ec/ec_mult.c) without BIGNUM
- arithmetic, and such that modified wNAFs are generated
- (which avoid length expansion in many cases).
- [Bodo Moeller]
- *) Add a function EC_GROUP_check_discriminant() (defined via
- EC_METHOD) that verifies that the curve discriminant is non-zero.
- Add a function EC_GROUP_check() that makes some sanity tests
- on a EC_GROUP, its generator and order. This includes
- EC_GROUP_check_discriminant().
- [Nils Larsch <nla@trustcenter.de>]
- *) Add ECDSA in new directory crypto/ecdsa/.
- Add applications 'openssl ecparam' and 'openssl ecdsa'
- (these are based on 'openssl dsaparam' and 'openssl dsa').
- ECDSA support is also included in various other files across the
- library. Most notably,
- - 'openssl req' now has a '-newkey ecdsa:file' option;
- - EVP_PKCS82PKEY (crypto/evp/evp_pkey.c) now can handle ECDSA;
- - X509_PUBKEY_get (crypto/asn1/x_pubkey.c) and
- d2i_PublicKey (crypto/asn1/d2i_pu.c) have been modified to make
- them suitable for ECDSA where domain parameters must be
- extracted before the specific public key;
- - ECDSA engine support has been added.
- [Nils Larsch <nla@trustcenter.de>]
- *) Include some named elliptic curves, and add OIDs from X9.62,
- SECG, and WAP/WTLS. Each curve can be obtained from the new
- function
- EC_GROUP_new_by_curve_name(),
- and the list of available named curves can be obtained with
- EC_get_builtin_curves().
- Also add a 'curve_name' member to EC_GROUP objects, which can be
- accessed via
- EC_GROUP_set_curve_name()
- EC_GROUP_get_curve_name()
- [Nils Larsch <larsch@trustcenter.de, Bodo Moeller]
-
- *) Remove a few calls to bn_wexpand() in BN_sqr() (the one in there
- was actually never needed) and in BN_mul(). The removal in BN_mul()
- required a small change in bn_mul_part_recursive() and the addition
- of the functions bn_cmp_part_words(), bn_sub_part_words() and
- bn_add_part_words(), which do the same thing as bn_cmp_words(),
- bn_sub_words() and bn_add_words() except they take arrays with
- differing sizes.
- [Richard Levitte]
- Changes between 0.9.7m and 0.9.7n [xx XXX xxxx]
- *) In the SSL/TLS server implementation, be strict about session ID
- context matching (which matters if an application uses a single
- external cache for different purposes). Previously,
- out-of-context reuse was forbidden only if SSL_VERIFY_PEER was
- set. This did ensure strict client verification, but meant that,
- with applications using a single external cache for quite
- different requirements, clients could circumvent ciphersuite
- restrictions for a given session ID context by starting a session
- in a different context.
- [Bodo Moeller]
- Changes between 0.9.7l and 0.9.7m [23 Feb 2007]
- *) Cleanse PEM buffers before freeing them since they may contain
- sensitive data.
- [Benjamin Bennett <ben@psc.edu>]
- *) Include "!eNULL" in SSL_DEFAULT_CIPHER_LIST to make sure that
- a ciphersuite string such as "DEFAULT:RSA" cannot enable
- authentication-only ciphersuites.
- [Bodo Moeller]
- *) Since AES128 and AES256 share a single mask bit in the logic of
- ssl/ssl_ciph.c, the code for masking out disabled ciphers needs a
- kludge to work properly if AES128 is available and AES256 isn't.
- [Victor Duchovni]
- *) Expand security boundary to match 1.1.1 module.
- [Steve Henson]
- *) Remove redundant features: hash file source, editing of test vectors
- modify fipsld to use external fips_premain.c signature.
- [Steve Henson]
- *) New perl script mkfipsscr.pl to create shell scripts or batch files to
- run algorithm test programs.
- [Steve Henson]
- *) Make algorithm test programs more tolerant of whitespace.
- [Steve Henson]
- *) Have SSL/TLS server implementation tolerate "mismatched" record
- protocol version while receiving ClientHello even if the
- ClientHello is fragmented. (The server can't insist on the
- particular protocol version it has chosen before the ServerHello
- message has informed the client about his choice.)
- [Bodo Moeller]
- *) Load error codes if they are not already present instead of using a
- static variable. This allows them to be cleanly unloaded and reloaded.
- [Steve Henson]
- Changes between 0.9.7k and 0.9.7l [28 Sep 2006]
- *) Introduce limits to prevent malicious keys being able to
- cause a denial of service. (CVE-2006-2940)
- [Steve Henson, Bodo Moeller]
- *) Fix ASN.1 parsing of certain invalid structures that can result
- in a denial of service. (CVE-2006-2937) [Steve Henson]
- *) Fix buffer overflow in SSL_get_shared_ciphers() function.
- (CVE-2006-3738) [Tavis Ormandy and Will Drewry, Google Security Team]
- *) Fix SSL client code which could crash if connecting to a
- malicious SSLv2 server. (CVE-2006-4343)
- [Tavis Ormandy and Will Drewry, Google Security Team]
- *) Change ciphersuite string processing so that an explicit
- ciphersuite selects this one ciphersuite (so that "AES256-SHA"
- will no longer include "AES128-SHA"), and any other similar
- ciphersuite (same bitmap) from *other* protocol versions (so that
- "RC4-MD5" will still include both the SSL 2.0 ciphersuite and the
- SSL 3.0/TLS 1.0 ciphersuite). This is a backport combining
- changes from 0.9.8b and 0.9.8d.
- [Bodo Moeller]
- Changes between 0.9.7j and 0.9.7k [05 Sep 2006]
- *) Avoid PKCS #1 v1.5 signature attack discovered by Daniel Bleichenbacher
- (CVE-2006-4339) [Ben Laurie and Google Security Team]
- *) Change the Unix randomness entropy gathering to use poll() when
- possible instead of select(), since the latter has some
- undesirable limitations.
- [Darryl Miles via Richard Levitte and Bodo Moeller]
- *) Disable rogue ciphersuites:
- - SSLv2 0x08 0x00 0x80 ("RC4-64-MD5")
- - SSLv3/TLSv1 0x00 0x61 ("EXP1024-RC2-CBC-MD5")
- - SSLv3/TLSv1 0x00 0x60 ("EXP1024-RC4-MD5")
- The latter two were purportedly from
- draft-ietf-tls-56-bit-ciphersuites-0[01].txt, but do not really
- appear there.
- Also deactive the remaining ciphersuites from
- draft-ietf-tls-56-bit-ciphersuites-01.txt. These are just as
- unofficial, and the ID has long expired.
- [Bodo Moeller]
- *) Fix RSA blinding Heisenbug (problems sometimes occured on
- dual-core machines) and other potential thread-safety issues.
- [Bodo Moeller]
- Changes between 0.9.7i and 0.9.7j [04 May 2006]
- *) Adapt fipsld and the build system to link against the validated FIPS
- module in FIPS mode.
- [Steve Henson]
- *) Fixes for VC++ 2005 build under Windows.
- [Steve Henson]
- *) Add new Windows build target VC-32-GMAKE for VC++. This uses GNU make
- from a Windows bash shell such as MSYS. It is autodetected from the
- "config" script when run from a VC++ environment. Modify standard VC++
- build to use fipscanister.o from the GNU make build.
- [Steve Henson]
- Changes between 0.9.7h and 0.9.7i [14 Oct 2005]
- *) Wrapped the definition of EVP_MAX_MD_SIZE in a #ifdef OPENSSL_FIPS.
- The value now differs depending on if you build for FIPS or not.
- BEWARE! A program linked with a shared FIPSed libcrypto can't be
- safely run with a non-FIPSed libcrypto, as it may crash because of
- the difference induced by this change.
- [Andy Polyakov]
- Changes between 0.9.7g and 0.9.7h [11 Oct 2005]
- *) Remove the functionality of SSL_OP_MSIE_SSLV2_RSA_PADDING
- (part of SSL_OP_ALL). This option used to disable the
- countermeasure against man-in-the-middle protocol-version
- rollback in the SSL 2.0 server implementation, which is a bad
- idea. (CVE-2005-2969)
- [Bodo Moeller; problem pointed out by Yutaka Oiwa (Research Center
- for Information Security, National Institute of Advanced Industrial
- Science and Technology [AIST], Japan)]
- *) Minimal support for X9.31 signatures and PSS padding modes. This is
- mainly for FIPS compliance and not fully integrated at this stage.
- [Steve Henson]
- *) For DSA signing, unless DSA_FLAG_NO_EXP_CONSTTIME is set, perform
- the exponentiation using a fixed-length exponent. (Otherwise,
- the information leaked through timing could expose the secret key
- after many signatures; cf. Bleichenbacher's attack on DSA with
- biased k.)
- [Bodo Moeller]
- *) Make a new fixed-window mod_exp implementation the default for
- RSA, DSA, and DH private-key operations so that the sequence of
- squares and multiplies and the memory access pattern are
- independent of the particular secret key. This will mitigate
- cache-timing and potential related attacks.
- BN_mod_exp_mont_consttime() is the new exponentiation implementation,
- and this is automatically used by BN_mod_exp_mont() if the new flag
- BN_FLG_EXP_CONSTTIME is set for the exponent. RSA, DSA, and DH
- will use this BN flag for private exponents unless the flag
- RSA_FLAG_NO_EXP_CONSTTIME, DSA_FLAG_NO_EXP_CONSTTIME, or
- DH_FLAG_NO_EXP_CONSTTIME, respectively, is set.
- [Matthew D Wood (Intel Corp), with some changes by Bodo Moeller]
- *) Change the client implementation for SSLv23_method() and
- SSLv23_client_method() so that is uses the SSL 3.0/TLS 1.0
- Client Hello message format if the SSL_OP_NO_SSLv2 option is set.
- (Previously, the SSL 2.0 backwards compatible Client Hello
- message format would be used even with SSL_OP_NO_SSLv2.)
- [Bodo Moeller]
- *) Add support for smime-type MIME parameter in S/MIME messages which some
- clients need.
- [Steve Henson]
- *) New function BN_MONT_CTX_set_locked() to set montgomery parameters in
- a threadsafe manner. Modify rsa code to use new function and add calls
- to dsa and dh code (which had race conditions before).
- [Steve Henson]
- *) Include the fixed error library code in the C error file definitions
- instead of fixing them up at runtime. This keeps the error code
- structures constant.
- [Steve Henson]
- Changes between 0.9.7f and 0.9.7g [11 Apr 2005]
- [NB: OpenSSL 0.9.7h and later 0.9.7 patch levels were released after
- OpenSSL 0.9.8.]
- *) Fixes for newer kerberos headers. NB: the casts are needed because
- the 'length' field is signed on one version and unsigned on another
- with no (?) obvious way to tell the difference, without these VC++
- complains. Also the "definition" of FAR (blank) is no longer included
- nor is the error ENOMEM. KRB5_PRIVATE has to be set to 1 to pick up
- some needed definitions.
- [Steve Henson]
- *) Undo Cygwin change.
- [Ulf Möller]
- *) Added support for proxy certificates according to RFC 3820.
- Because they may be a security thread to unaware applications,
- they must be explicitely allowed in run-time. See
- docs/HOWTO/proxy_certificates.txt for further information.
- [Richard Levitte]
- Changes between 0.9.7e and 0.9.7f [22 Mar 2005]
- *) Use (SSL_RANDOM_VALUE - 4) bytes of pseudo random data when generating
- server and client random values. Previously
- (SSL_RANDOM_VALUE - sizeof(time_t)) would be used which would result in
- less random data when sizeof(time_t) > 4 (some 64 bit platforms).
- This change has negligible security impact because:
- 1. Server and client random values still have 24 bytes of pseudo random
- data.
- 2. Server and client random values are sent in the clear in the initial
- handshake.
- 3. The master secret is derived using the premaster secret (48 bytes in
- size for static RSA ciphersuites) as well as client server and random
- values.
- The OpenSSL team would like to thank the UK NISCC for bringing this issue
- to our attention.
- [Stephen Henson, reported by UK NISCC]
- *) Use Windows randomness collection on Cygwin.
- [Ulf Möller]
- *) Fix hang in EGD/PRNGD query when communication socket is closed
- prematurely by EGD/PRNGD.
- [Darren Tucker <dtucker@zip.com.au> via Lutz Jänicke, resolves #1014]
- *) Prompt for pass phrases when appropriate for PKCS12 input format.
- [Steve Henson]
- *) Back-port of selected performance improvements from development
- branch, as well as improved support for PowerPC platforms.
- [Andy Polyakov]
- *) Add lots of checks for memory allocation failure, error codes to indicate
- failure and freeing up memory if a failure occurs.
- [Nauticus Networks SSL Team <openssl@nauticusnet.com>, Steve Henson]
- *) Add new -passin argument to dgst.
- [Steve Henson]
- *) Perform some character comparisons of different types in X509_NAME_cmp:
- this is needed for some certificates that reencode DNs into UTF8Strings
- (in violation of RFC3280) and can't or wont issue name rollover
- certificates.
- [Steve Henson]
- *) Make an explicit check during certificate validation to see that
- the CA setting in each certificate on the chain is correct. As a
- side effect always do the following basic checks on extensions,
- not just when there's an associated purpose to the check:
- - if there is an unhandled critical extension (unless the user
- has chosen to ignore this fault)
- - if the path length has been exceeded (if one is set at all)
- - that certain extensions fit the associated purpose (if one has
- been given)
- [Richard Levitte]
- Changes between 0.9.7d and 0.9.7e [25 Oct 2004]
- *) Avoid a race condition when CRLs are checked in a multi threaded
- environment. This would happen due to the reordering of the revoked
- entries during signature checking and serial number lookup. Now the
- encoding is cached and the serial number sort performed under a lock.
- Add new STACK function sk_is_sorted().
- [Steve Henson]
- *) Add Delta CRL to the extension code.
- [Steve Henson]
- *) Various fixes to s3_pkt.c so alerts are sent properly.
- [David Holmes <d.holmes@f5.com>]
- *) Reduce the chances of duplicate issuer name and serial numbers (in
- violation of RFC3280) using the OpenSSL certificate creation utilities.
- This is done by creating a random 64 bit value for the initial serial
- number when a serial number file is created or when a self signed
- certificate is created using 'openssl req -x509'. The initial serial
- number file is created using 'openssl x509 -next_serial' in CA.pl
- rather than being initialized to 1.
- [Steve Henson]
- Changes between 0.9.7c and 0.9.7d [17 Mar 2004]
- *) Fix null-pointer assignment in do_change_cipher_spec() revealed
- by using the Codenomicon TLS Test Tool (CVE-2004-0079)
- [Joe Orton, Steve Henson]
- *) Fix flaw in SSL/TLS handshaking when using Kerberos ciphersuites
- (CVE-2004-0112)
- [Joe Orton, Steve Henson]
- *) Make it possible to have multiple active certificates with the same
- subject in the CA index file. This is done only if the keyword
- 'unique_subject' is set to 'no' in the main CA section (default
- if 'CA_default') of the configuration file. The value is saved
- with the database itself in a separate index attribute file,
- named like the index file with '.attr' appended to the name.
- [Richard Levitte]
- *) X509 verify fixes. Disable broken certificate workarounds when
- X509_V_FLAGS_X509_STRICT is set. Check CRL issuer has cRLSign set if
- keyUsage extension present. Don't accept CRLs with unhandled critical
- extensions: since verify currently doesn't process CRL extensions this
- rejects a CRL with *any* critical extensions. Add new verify error codes
- for these cases.
- [Steve Henson]
- *) When creating an OCSP nonce use an OCTET STRING inside the extnValue.
- A clarification of RFC2560 will require the use of OCTET STRINGs and
- some implementations cannot handle the current raw format. Since OpenSSL
- copies and compares OCSP nonces as opaque blobs without any attempt at
- parsing them this should not create any compatibility issues.
- [Steve Henson]
- *) New md flag EVP_MD_CTX_FLAG_REUSE this allows md_data to be reused when
- calling EVP_MD_CTX_copy_ex() to avoid calling OPENSSL_malloc(). Without
- this HMAC (and other) operations are several times slower than OpenSSL
- < 0.9.7.
- [Steve Henson]
- *) Print out GeneralizedTime and UTCTime in ASN1_STRING_print_ex().
- [Peter Sylvester <Peter.Sylvester@EdelWeb.fr>]
- *) Use the correct content when signing type "other".
- [Steve Henson]
- Changes between 0.9.7b and 0.9.7c [30 Sep 2003]
- *) Fix various bugs revealed by running the NISCC test suite:
- Stop out of bounds reads in the ASN1 code when presented with
- invalid tags (CVE-2003-0543 and CVE-2003-0544).
-
- Free up ASN1_TYPE correctly if ANY type is invalid (CVE-2003-0545).
- If verify callback ignores invalid public key errors don't try to check
- certificate signature with the NULL public key.
- [Steve Henson]
- *) New -ignore_err option in ocsp application to stop the server
- exiting on the first error in a request.
- [Steve Henson]
- *) In ssl3_accept() (ssl/s3_srvr.c) only accept a client certificate
- if the server requested one: as stated in TLS 1.0 and SSL 3.0
- specifications.
- [Steve Henson]
- *) In ssl3_get_client_hello() (ssl/s3_srvr.c), tolerate additional
- extra data after the compression methods not only for TLS 1.0
- but also for SSL 3.0 (as required by the specification).
- [Bodo Moeller; problem pointed out by Matthias Loepfe]
- *) Change X509_certificate_type() to mark the key as exported/exportable
- when it's 512 *bits* long, not 512 bytes.
- [Richard Levitte]
- *) Change AES_cbc_encrypt() so it outputs exact multiple of
- blocks during encryption.
- [Richard Levitte]
- *) Various fixes to base64 BIO and non blocking I/O. On write
- flushes were not handled properly if the BIO retried. On read
- data was not being buffered properly and had various logic bugs.
- This also affects blocking I/O when the data being decoded is a
- certain size.
- [Steve Henson]
- *) Various S/MIME bugfixes and compatibility changes:
- output correct application/pkcs7 MIME type if
- PKCS7_NOOLDMIMETYPE is set. Tolerate some broken signatures.
- Output CR+LF for EOL if PKCS7_CRLFEOL is set (this makes opening
- of files as .eml work). Correctly handle very long lines in MIME
- parser.
- [Steve Henson]
- Changes between 0.9.7a and 0.9.7b [10 Apr 2003]
- *) Countermeasure against the Klima-Pokorny-Rosa extension of
- Bleichbacher's attack on PKCS #1 v1.5 padding: treat
- a protocol version number mismatch like a decryption error
- in ssl3_get_client_key_exchange (ssl/s3_srvr.c).
- [Bodo Moeller]
- *) Turn on RSA blinding by default in the default implementation
- to avoid a timing attack. Applications that don't want it can call
- RSA_blinding_off() or use the new flag RSA_FLAG_NO_BLINDING.
- They would be ill-advised to do so in most cases.
- [Ben Laurie, Steve Henson, Geoff Thorpe, Bodo Moeller]
- *) Change RSA blinding code so that it works when the PRNG is not
- seeded (in this case, the secret RSA exponent is abused as
- an unpredictable seed -- if it is not unpredictable, there
- is no point in blinding anyway). Make RSA blinding thread-safe
- by remembering the creator's thread ID in rsa->blinding and
- having all other threads use local one-time blinding factors
- (this requires more computation than sharing rsa->blinding, but
- avoids excessive locking; and if an RSA object is not shared
- between threads, blinding will still be very fast).
- [Bodo Moeller]
- *) Fixed a typo bug that would cause ENGINE_set_default() to set an
- ENGINE as defaults for all supported algorithms irrespective of
- the 'flags' parameter. 'flags' is now honoured, so applications
- should make sure they are passing it correctly.
- [Geoff Thorpe]
- *) Target "mingw" now allows native Windows code to be generated in
- the Cygwin environment as well as with the MinGW compiler.
- [Ulf Moeller]
- Changes between 0.9.7 and 0.9.7a [19 Feb 2003]
- *) In ssl3_get_record (ssl/s3_pkt.c), minimize information leaked
- via timing by performing a MAC computation even if incorrrect
- block cipher padding has been found. This is a countermeasure
- against active attacks where the attacker has to distinguish
- between bad padding and a MAC verification error. (CVE-2003-0078)
- [Bodo Moeller; problem pointed out by Brice Canvel (EPFL),
- Alain Hiltgen (UBS), Serge Vaudenay (EPFL), and
- Martin Vuagnoux (EPFL, Ilion)]
- *) Make the no-err option work as intended. The intention with no-err
- is not to have the whole error stack handling routines removed from
- libcrypto, it's only intended to remove all the function name and
- reason texts, thereby removing some of the footprint that may not
- be interesting if those errors aren't displayed anyway.
- NOTE: it's still possible for any application or module to have it's
- own set of error texts inserted. The routines are there, just not
- used by default when no-err is given.
- [Richard Levitte]
- *) Add support for FreeBSD on IA64.
- [dirk.meyer@dinoex.sub.org via Richard Levitte, resolves #454]
- *) Adjust DES_cbc_cksum() so it returns the same value as the MIT
- Kerberos function mit_des_cbc_cksum(). Before this change,
- the value returned by DES_cbc_cksum() was like the one from
- mit_des_cbc_cksum(), except the bytes were swapped.
- [Kevin Greaney <Kevin.Greaney@hp.com> and Richard Levitte]
- *) Allow an application to disable the automatic SSL chain building.
- Before this a rather primitive chain build was always performed in
- ssl3_output_cert_chain(): an application had no way to send the
- correct chain if the automatic operation produced an incorrect result.
- Now the chain builder is disabled if either:
- 1. Extra certificates are added via SSL_CTX_add_extra_chain_cert().
- 2. The mode flag SSL_MODE_NO_AUTO_CHAIN is set.
- The reasoning behind this is that an application would not want the
- auto chain building to take place if extra chain certificates are
- present and it might also want a means of sending no additional
- certificates (for example the chain has two certificates and the
- root is omitted).
- [Steve Henson]
- *) Add the possibility to build without the ENGINE framework.
- [Steven Reddie <smr@essemer.com.au> via Richard Levitte]
- *) Under Win32 gmtime() can return NULL: check return value in
- OPENSSL_gmtime(). Add error code for case where gmtime() fails.
- [Steve Henson]
- *) DSA routines: under certain error conditions uninitialized BN objects
- could be freed. Solution: make sure initialization is performed early
- enough. (Reported and fix supplied by Ivan D Nestlerode <nestler@MIT.EDU>,
- Nils Larsch <nla@trustcenter.de> via PR#459)
- [Lutz Jaenicke]
- *) Another fix for SSLv2 session ID handling: the session ID was incorrectly
- checked on reconnect on the client side, therefore session resumption
- could still fail with a "ssl session id is different" error. This
- behaviour is masked when SSL_OP_ALL is used due to
- SSL_OP_MICROSOFT_SESS_ID_BUG being set.
- Behaviour observed by Crispin Flowerday <crispin@flowerday.cx> as
- followup to PR #377.
- [Lutz Jaenicke]
- *) IA-32 assembler support enhancements: unified ELF targets, support
- for SCO/Caldera platforms, fix for Cygwin shared build.
- [Andy Polyakov]
- *) Add support for FreeBSD on sparc64. As a consequence, support for
- FreeBSD on non-x86 processors is separate from x86 processors on
- the config script, much like the NetBSD support.
- [Richard Levitte & Kris Kennaway <kris@obsecurity.org>]
- Changes between 0.9.6h and 0.9.7 [31 Dec 2002]
- [NB: OpenSSL 0.9.6i and later 0.9.6 patch levels were released after
- OpenSSL 0.9.7.]
- *) Fix session ID handling in SSLv2 client code: the SERVER FINISHED
- code (06) was taken as the first octet of the session ID and the last
- octet was ignored consequently. As a result SSLv2 client side session
- caching could not have worked due to the session ID mismatch between
- client and server.
- Behaviour observed by Crispin Flowerday <crispin@flowerday.cx> as
- PR #377.
- [Lutz Jaenicke]
- *) Change the declaration of needed Kerberos libraries to use EX_LIBS
- instead of the special (and badly supported) LIBKRB5. LIBKRB5 is
- removed entirely.
- [Richard Levitte]
- *) The hw_ncipher.c engine requires dynamic locks. Unfortunately, it
- seems that in spite of existing for more than a year, many application
- author have done nothing to provide the necessary callbacks, which
- means that this particular engine will not work properly anywhere.
- This is a very unfortunate situation which forces us, in the name
- of usability, to give the hw_ncipher.c a static lock, which is part
- of libcrypto.
- NOTE: This is for the 0.9.7 series ONLY. This hack will never
- appear in 0.9.8 or later. We EXPECT application authors to have
- dealt properly with this when 0.9.8 is released (unless we actually
- make such changes in the libcrypto locking code that changes will
- have to be made anyway).
- [Richard Levitte]
- *) In asn1_d2i_read_bio() repeatedly call BIO_read() until all content
- octets have been read, EOF or an error occurs. Without this change
- some truncated ASN1 structures will not produce an error.
- [Steve Henson]
- *) Disable Heimdal support, since it hasn't been fully implemented.
- Still give the possibility to force the use of Heimdal, but with
- warnings and a request that patches get sent to openssl-dev.
- [Richard Levitte]
- *) Add the VC-CE target, introduce the WINCE sysname, and add
- INSTALL.WCE and appropriate conditionals to make it build.
- [Steven Reddie <smr@essemer.com.au> via Richard Levitte]
- *) Change the DLL names for Cygwin to cygcrypto-x.y.z.dll and
- cygssl-x.y.z.dll, where x, y and z are the major, minor and
- edit numbers of the version.
- [Corinna Vinschen <vinschen@redhat.com> and Richard Levitte]
- *) Introduce safe string copy and catenation functions
- (BUF_strlcpy() and BUF_strlcat()).
- [Ben Laurie (CHATS) and Richard Levitte]
- *) Avoid using fixed-size buffers for one-line DNs.
- [Ben Laurie (CHATS)]
- *) Add BUF_MEM_grow_clean() to avoid information leakage when
- resizing buffers containing secrets, and use where appropriate.
- [Ben Laurie (CHATS)]
- *) Avoid using fixed size buffers for configuration file location.
- [Ben Laurie (CHATS)]
- *) Avoid filename truncation for various CA files.
- [Ben Laurie (CHATS)]
- *) Use sizeof in preference to magic numbers.
- [Ben Laurie (CHATS)]
- *) Avoid filename truncation in cert requests.
- [Ben Laurie (CHATS)]
- *) Add assertions to check for (supposedly impossible) buffer
- overflows.
- [Ben Laurie (CHATS)]
- *) Don't cache truncated DNS entries in the local cache (this could
- potentially lead to a spoofing attack).
- [Ben Laurie (CHATS)]
- *) Fix various buffers to be large enough for hex/decimal
- representations in a platform independent manner.
- [Ben Laurie (CHATS)]
- *) Add CRYPTO_realloc_clean() to avoid information leakage when
- resizing buffers containing secrets, and use where appropriate.
- [Ben Laurie (CHATS)]
- *) Add BIO_indent() to avoid much slightly worrying code to do
- indents.
- [Ben Laurie (CHATS)]
- *) Convert sprintf()/BIO_puts() to BIO_printf().
- [Ben Laurie (CHATS)]
- *) buffer_gets() could terminate with the buffer only half
- full. Fixed.
- [Ben Laurie (CHATS)]
- *) Add assertions to prevent user-supplied crypto functions from
- overflowing internal buffers by having large block sizes, etc.
- [Ben Laurie (CHATS)]
- *) New OPENSSL_assert() macro (similar to assert(), but enabled
- unconditionally).
- [Ben Laurie (CHATS)]
- *) Eliminate unused copy of key in RC4.
- [Ben Laurie (CHATS)]
- *) Eliminate unused and incorrectly sized buffers for IV in pem.h.
- [Ben Laurie (CHATS)]
- *) Fix off-by-one error in EGD path.
- [Ben Laurie (CHATS)]
- *) If RANDFILE path is too long, ignore instead of truncating.
- [Ben Laurie (CHATS)]
- *) Eliminate unused and incorrectly sized X.509 structure
- CBCParameter.
- [Ben Laurie (CHATS)]
- *) Eliminate unused and dangerous function knumber().
- [Ben Laurie (CHATS)]
- *) Eliminate unused and dangerous structure, KSSL_ERR.
- [Ben Laurie (CHATS)]
- *) Protect against overlong session ID context length in an encoded
- session object. Since these are local, this does not appear to be
- exploitable.
- [Ben Laurie (CHATS)]
- *) Change from security patch (see 0.9.6e below) that did not affect
- the 0.9.6 release series:
- Remote buffer overflow in SSL3 protocol - an attacker could
- supply an oversized master key in Kerberos-enabled versions.
- (CVE-2002-0657)
- [Ben Laurie (CHATS)]
- *) Change the SSL kerb5 codes to match RFC 2712.
- [Richard Levitte]
- *) Make -nameopt work fully for req and add -reqopt switch.
- [Michael Bell <michael.bell@rz.hu-berlin.de>, Steve Henson]
- *) The "block size" for block ciphers in CFB and OFB mode should be 1.
- [Steve Henson, reported by Yngve Nysaeter Pettersen <yngve@opera.com>]
- *) Make sure tests can be performed even if the corresponding algorithms
- have been removed entirely. This was also the last step to make
- OpenSSL compilable with DJGPP under all reasonable conditions.
- [Richard Levitte, Doug Kaufman <dkaufman@rahul.net>]
- *) Add cipher selection rules COMPLEMENTOFALL and COMPLEMENTOFDEFAULT
- to allow version independent disabling of normally unselected ciphers,
- which may be activated as a side-effect of selecting a single cipher.
- (E.g., cipher list string "RSA" enables ciphersuites that are left
- out of "ALL" because they do not provide symmetric encryption.
- "RSA:!COMPLEMEMENTOFALL" avoids these unsafe ciphersuites.)
- [Lutz Jaenicke, Bodo Moeller]
- *) Add appropriate support for separate platform-dependent build
- directories. The recommended way to make a platform-dependent
- build directory is the following (tested on Linux), maybe with
- some local tweaks:
- # Place yourself outside of the OpenSSL source tree. In
- # this example, the environment variable OPENSSL_SOURCE
- # is assumed to contain the absolute OpenSSL source directory.
- mkdir -p objtree/"`uname -s`-`uname -r`-`uname -m`"
- cd objtree/"`uname -s`-`uname -r`-`uname -m`"
- (cd $OPENSSL_SOURCE; find . -type f) | while read F; do
- mkdir -p `dirname $F`
- ln -s $OPENSSL_SOURCE/$F $F
- done
- To be absolutely sure not to disturb the source tree, a "make clean"
- is a good thing. If it isn't successfull, don't worry about it,
- it probably means the source directory is very clean.
- [Richard Levitte]
- *) Make sure any ENGINE control commands make local copies of string
- pointers passed to them whenever necessary. Otherwise it is possible
- the caller may have overwritten (or deallocated) the original string
- data when a later ENGINE operation tries to use the stored values.
- [Götz Babin-Ebell <babinebell@trustcenter.de>]
- *) Improve diagnostics in file reading and command-line digests.
- [Ben Laurie aided and abetted by Solar Designer <solar@openwall.com>]
- *) Add AES modes CFB and OFB to the object database. Correct an
- error in AES-CFB decryption.
- [Richard Levitte]
- *) Remove most calls to EVP_CIPHER_CTX_cleanup() in evp_enc.c, this
- allows existing EVP_CIPHER_CTX structures to be reused after
- calling EVP_*Final(). This behaviour is used by encryption
- BIOs and some applications. This has the side effect that
- applications must explicitly clean up cipher contexts with
- EVP_CIPHER_CTX_cleanup() or they will leak memory.
- [Steve Henson]
- *) Check the values of dna and dnb in bn_mul_recursive before calling
- bn_mul_comba (a non zero value means the a or b arrays do not contain
- n2 elements) and fallback to bn_mul_normal if either is not zero.
- [Steve Henson]
- *) Fix escaping of non-ASCII characters when using the -subj option
- of the "openssl req" command line tool. (Robert Joop <joop@fokus.gmd.de>)
- [Lutz Jaenicke]
- *) Make object definitions compliant to LDAP (RFC2256): SN is the short
- form for "surname", serialNumber has no short form.
- Use "mail" as the short name for "rfc822Mailbox" according to RFC2798;
- therefore remove "mail" short name for "internet 7".
- The OID for unique identifiers in X509 certificates is
- x500UniqueIdentifier, not uniqueIdentifier.
- Some more OID additions. (Michael Bell <michael.bell@rz.hu-berlin.de>)
- [Lutz Jaenicke]
- *) Add an "init" command to the ENGINE config module and auto initialize
- ENGINEs. Without any "init" command the ENGINE will be initialized
- after all ctrl commands have been executed on it. If init=1 the
- ENGINE is initailized at that point (ctrls before that point are run
- on the uninitialized ENGINE and after on the initialized one). If
- init=0 then the ENGINE will not be iniatialized at all.
- [Steve Henson]
- *) Fix the 'app_verify_callback' interface so that the user-defined
- argument is actually passed to the callback: In the
- SSL_CTX_set_cert_verify_callback() prototype, the callback
- declaration has been changed from
- int (*cb)()
- into
- int (*cb)(X509_STORE_CTX *,void *);
- in ssl_verify_cert_chain (ssl/ssl_cert.c), the call
- i=s->ctx->app_verify_callback(&ctx)
- has been changed into
- i=s->ctx->app_verify_callback(&ctx, s->ctx->app_verify_arg).
- To update applications using SSL_CTX_set_cert_verify_callback(),
- a dummy argument can be added to their callback functions.
- [D. K. Smetters <smetters@parc.xerox.com>]
- *) Added the '4758cca' ENGINE to support IBM 4758 cards.
- [Maurice Gittens <maurice@gittens.nl>, touchups by Geoff Thorpe]
- *) Add and OPENSSL_LOAD_CONF define which will cause
- OpenSSL_add_all_algorithms() to load the openssl.cnf config file.
- This allows older applications to transparently support certain
- OpenSSL features: such as crypto acceleration and dynamic ENGINE loading.
- Two new functions OPENSSL_add_all_algorithms_noconf() which will never
- load the config file and OPENSSL_add_all_algorithms_conf() which will
- always load it have also been added.
- [Steve Henson]
- *) Add the OFB, CFB and CTR (all with 128 bit feedback) to AES.
- Adjust NIDs and EVP layer.
- [Stephen Sprunk <stephen@sprunk.org> and Richard Levitte]
- *) Config modules support in openssl utility.
- Most commands now load modules from the config file,
- though in a few (such as version) this isn't done
- because it couldn't be used for anything.
- In the case of ca and req the config file used is
- the same as the utility itself: that is the -config
- command line option can be used to specify an
- alternative file.
- [Steve Henson]
- *) Move default behaviour from OPENSSL_config(). If appname is NULL
- use "openssl_conf" if filename is NULL use default openssl config file.
- [Steve Henson]
- *) Add an argument to OPENSSL_config() to allow the use of an alternative
- config section name. Add a new flag to tolerate a missing config file
- and move code to CONF_modules_load_file().
- [Steve Henson]
- *) Support for crypto accelerator cards from Accelerated Encryption
- Processing, www.aep.ie. (Use engine 'aep')
- The support was copied from 0.9.6c [engine] and adapted/corrected
- to work with the new engine framework.
- [AEP Inc. and Richard Levitte]
- *) Support for SureWare crypto accelerator cards from Baltimore
- Technologies. (Use engine 'sureware')
- The support was copied from 0.9.6c [engine] and adapted
- to work with the new engine framework.
- [Richard Levitte]
- *) Have the CHIL engine fork-safe (as defined by nCipher) and actually
- make the newer ENGINE framework commands for the CHIL engine work.
- [Toomas Kiisk <vix@cyber.ee> and Richard Levitte]
- *) Make it possible to produce shared libraries on ReliantUNIX.
- [Robert Dahlem <Robert.Dahlem@ffm2.siemens.de> via Richard Levitte]
- *) Add the configuration target debug-linux-ppro.
- Make 'openssl rsa' use the general key loading routines
- implemented in apps.c, and make those routines able to
- handle the key format FORMAT_NETSCAPE and the variant
- FORMAT_IISSGC.
- [Toomas Kiisk <vix@cyber.ee> via Richard Levitte]
- *) Fix a crashbug and a logic bug in hwcrhk_load_pubkey().
- [Toomas Kiisk <vix@cyber.ee> via Richard Levitte]
- *) Add -keyform to rsautl, and document -engine.
- [Richard Levitte, inspired by Toomas Kiisk <vix@cyber.ee>]
- *) Change BIO_new_file (crypto/bio/bss_file.c) to use new
- BIO_R_NO_SUCH_FILE error code rather than the generic
- ERR_R_SYS_LIB error code if fopen() fails with ENOENT.
- [Ben Laurie]
- *) Add new functions
- ERR_peek_last_error
- ERR_peek_last_error_line
- ERR_peek_last_error_line_data.
- These are similar to
- ERR_peek_error
- ERR_peek_error_line
- ERR_peek_error_line_data,
- but report on the latest error recorded rather than the first one
- still in the error queue.
- [Ben Laurie, Bodo Moeller]
-
- *) default_algorithms option in ENGINE config module. This allows things
- like:
- default_algorithms = ALL
- default_algorithms = RSA, DSA, RAND, CIPHERS, DIGESTS
- [Steve Henson]
- *) Prelminary ENGINE config module.
- [Steve Henson]
- *) New experimental application configuration code.
- [Steve Henson]
- *) Change the AES code to follow the same name structure as all other
- symmetric ciphers, and behave the same way. Move everything to
- the directory crypto/aes, thereby obsoleting crypto/rijndael.
- [Stephen Sprunk <stephen@sprunk.org> and Richard Levitte]
- *) SECURITY: remove unsafe setjmp/signal interaction from ui_openssl.c.
- [Ben Laurie and Theo de Raadt]
- *) Add option to output public keys in req command.
- [Massimiliano Pala madwolf@openca.org]
- *) Use wNAFs in EC_POINTs_mul() for improved efficiency
- (up to about 10% better than before for P-192 and P-224).
- [Bodo Moeller]
- *) New functions/macros
- SSL_CTX_set_msg_callback(ctx, cb)
- SSL_CTX_set_msg_callback_arg(ctx, arg)
- SSL_set_msg_callback(ssl, cb)
- SSL_set_msg_callback_arg(ssl, arg)
- to request calling a callback function
- void cb(int write_p, int version, int content_type,
- const void *buf, size_t len, SSL *ssl, void *arg)
- whenever a protocol message has been completely received
- (write_p == 0) or sent (write_p == 1). Here 'version' is the
- protocol version according to which the SSL library interprets
- the current protocol message (SSL2_VERSION, SSL3_VERSION, or
- TLS1_VERSION). 'content_type' is 0 in the case of SSL 2.0, or
- the content type as defined in the SSL 3.0/TLS 1.0 protocol
- specification (change_cipher_spec(20), alert(21), handshake(22)).
- 'buf' and 'len' point to the actual message, 'ssl' to the
- SSL object, and 'arg' is the application-defined value set by
- SSL[_CTX]_set_msg_callback_arg().
- 'openssl s_client' and 'openssl s_server' have new '-msg' options
- to enable a callback that displays all protocol messages.
- [Bodo Moeller]
- *) Change the shared library support so shared libraries are built as
- soon as the corresponding static library is finished, and thereby get
- openssl and the test programs linked against the shared library.
- This still only happens when the keyword "shard" has been given to
- the configuration scripts.
- NOTE: shared library support is still an experimental thing, and
- backward binary compatibility is still not guaranteed.
- ["Maciej W. Rozycki" <macro@ds2.pg.gda.pl> and Richard Levitte]
- *) Add support for Subject Information Access extension.
- [Peter Sylvester <Peter.Sylvester@EdelWeb.fr>]
- *) Make BUF_MEM_grow() behaviour more consistent: Initialise to zero
- additional bytes when new memory had to be allocated, not just
- when reusing an existing buffer.
- [Bodo Moeller]
- *) New command line and configuration option 'utf8' for the req command.
- This allows field values to be specified as UTF8 strings.
- [Steve Henson]
- *) Add -multi and -mr options to "openssl speed" - giving multiple parallel
- runs for the former and machine-readable output for the latter.
- [Ben Laurie]
- *) Add '-noemailDN' option to 'openssl ca'. This prevents inclusion
- of the e-mail address in the DN (i.e., it will go into a certificate
- extension only). The new configuration file option 'email_in_dn = no'
- has the same effect.
- [Massimiliano Pala madwolf@openca.org]
- *) Change all functions with names starting with des_ to be starting
- with DES_ instead. Add wrappers that are compatible with libdes,
- but are named _ossl_old_des_*. Finally, add macros that map the
- des_* symbols to the corresponding _ossl_old_des_* if libdes
- compatibility is desired. If OpenSSL 0.9.6c compatibility is
- desired, the des_* symbols will be mapped to DES_*, with one
- exception.
- Since we provide two compatibility mappings, the user needs to
- define the macro OPENSSL_DES_LIBDES_COMPATIBILITY if libdes
- compatibility is desired. The default (i.e., when that macro
- isn't defined) is OpenSSL 0.9.6c compatibility.
- There are also macros that enable and disable the support of old
- des functions altogether. Those are OPENSSL_ENABLE_OLD_DES_SUPPORT
- and OPENSSL_DISABLE_OLD_DES_SUPPORT. If none or both of those
- are defined, the default will apply: to support the old des routines.
- In either case, one must include openssl/des.h to get the correct
- definitions. Do not try to just include openssl/des_old.h, that
- won't work.
- NOTE: This is a major break of an old API into a new one. Software
- authors are encouraged to switch to the DES_ style functions. Some
- time in the future, des_old.h and the libdes compatibility functions
- will be disable (i.e. OPENSSL_DISABLE_OLD_DES_SUPPORT will be the
- default), and then completely removed.
- [Richard Levitte]
- *) Test for certificates which contain unsupported critical extensions.
- If such a certificate is found during a verify operation it is
- rejected by default: this behaviour can be overridden by either
- handling the new error X509_V_ERR_UNHANDLED_CRITICAL_EXTENSION or
- by setting the verify flag X509_V_FLAG_IGNORE_CRITICAL. A new function
- X509_supported_extension() has also been added which returns 1 if a
- particular extension is supported.
- [Steve Henson]
- *) Modify the behaviour of EVP cipher functions in similar way to digests
- to retain compatibility with existing code.
- [Steve Henson]
- *) Modify the behaviour of EVP_DigestInit() and EVP_DigestFinal() to retain
- compatibility with existing code. In particular the 'ctx' parameter does
- not have to be to be initialized before the call to EVP_DigestInit() and
- it is tidied up after a call to EVP_DigestFinal(). New function
- EVP_DigestFinal_ex() which does not tidy up the ctx. Similarly function
- EVP_MD_CTX_copy() changed to not require the destination to be
- initialized valid and new function EVP_MD_CTX_copy_ex() added which
- requires the destination to be valid.
- Modify all the OpenSSL digest calls to use EVP_DigestInit_ex(),
- EVP_DigestFinal_ex() and EVP_MD_CTX_copy_ex().
- [Steve Henson]
- *) Change ssl3_get_message (ssl/s3_both.c) and the functions using it
- so that complete 'Handshake' protocol structures are kept in memory
- instead of overwriting 'msg_type' and 'length' with 'body' data.
- [Bodo Moeller]
- *) Add an implementation of SSL_add_dir_cert_subjects_to_stack for Win32.
- [Massimo Santin via Richard Levitte]
- *) Major restructuring to the underlying ENGINE code. This includes
- reduction of linker bloat, separation of pure "ENGINE" manipulation
- (initialisation, etc) from functionality dealing with implementations
- of specific crypto iterfaces. This change also introduces integrated
- support for symmetric ciphers and digest implementations - so ENGINEs
- can now accelerate these by providing EVP_CIPHER and EVP_MD
- implementations of their own. This is detailed in crypto/engine/README
- as it couldn't be adequately described here. However, there are a few
- API changes worth noting - some RSA, DSA, DH, and RAND functions that
- were changed in the original introduction of ENGINE code have now
- reverted back - the hooking from this code to ENGINE is now a good
- deal more passive and at run-time, operations deal directly with
- RSA_METHODs, DSA_METHODs (etc) as they did before, rather than
- dereferencing through an ENGINE pointer any more. Also, the ENGINE
- functions dealing with BN_MOD_EXP[_CRT] handlers have been removed -
- they were not being used by the framework as there is no concept of a
- BIGNUM_METHOD and they could not be generalised to the new
- 'ENGINE_TABLE' mechanism that underlies the new code. Similarly,
- ENGINE_cpy() has been removed as it cannot be consistently defined in
- the new code.
- [Geoff Thorpe]
- *) Change ASN1_GENERALIZEDTIME_check() to allow fractional seconds.
- [Steve Henson]
- *) Change mkdef.pl to sort symbols that get the same entry number,
- and make sure the automatically generated functions ERR_load_*
- become part of libeay.num as well.
- [Richard Levitte]
- *) New function SSL_renegotiate_pending(). This returns true once
- renegotiation has been requested (either SSL_renegotiate() call
- or HelloRequest/ClientHello receveived from the peer) and becomes
- false once a handshake has been completed.
- (For servers, SSL_renegotiate() followed by SSL_do_handshake()
- sends a HelloRequest, but does not ensure that a handshake takes
- place. SSL_renegotiate_pending() is useful for checking if the
- client has followed the request.)
- [Bodo Moeller]
- *) New SSL option SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION.
- By default, clients may request session resumption even during
- renegotiation (if session ID contexts permit); with this option,
- session resumption is possible only in the first handshake.
- SSL_OP_ALL is now 0x00000FFFL instead of 0x000FFFFFL. This makes
- more bits available for options that should not be part of
- SSL_OP_ALL (such as SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION).
- [Bodo Moeller]
- *) Add some demos for certificate and certificate request creation.
- [Steve Henson]
- *) Make maximum certificate chain size accepted from the peer application
- settable (SSL*_get/set_max_cert_list()), as proposed by
- "Douglas E. Engert" <deengert@anl.gov>.
- [Lutz Jaenicke]
- *) Add support for shared libraries for Unixware-7
- (Boyd Lynn Gerber <gerberb@zenez.com>).
- [Lutz Jaenicke]
- *) Add a "destroy" handler to ENGINEs that allows structural cleanup to
- be done prior to destruction. Use this to unload error strings from
- ENGINEs that load their own error strings. NB: This adds two new API
- functions to "get" and "set" this destroy handler in an ENGINE.
- [Geoff Thorpe]
- *) Alter all existing ENGINE implementations (except "openssl" and
- "openbsd") to dynamically instantiate their own error strings. This
- makes them more flexible to be built both as statically-linked ENGINEs
- and self-contained shared-libraries loadable via the "dynamic" ENGINE.
- Also, add stub code to each that makes building them as self-contained
- shared-libraries easier (see README.ENGINE).
- [Geoff Thorpe]
- *) Add a "dynamic" ENGINE that provides a mechanism for binding ENGINE
- implementations into applications that are completely implemented in
- self-contained shared-libraries. The "dynamic" ENGINE exposes control
- commands that can be used to configure what shared-library to load and
- to control aspects of the way it is handled. Also, made an update to
- the README.ENGINE file that brings its information up-to-date and
- provides some information and instructions on the "dynamic" ENGINE
- (ie. how to use it, how to build "dynamic"-loadable ENGINEs, etc).
- [Geoff Thorpe]
- *) Make it possible to unload ranges of ERR strings with a new
- "ERR_unload_strings" function.
- [Geoff Thorpe]
- *) Add a copy() function to EVP_MD.
- [Ben Laurie]
- *) Make EVP_MD routines take a context pointer instead of just the
- md_data void pointer.
- [Ben Laurie]
- *) Add flags to EVP_MD and EVP_MD_CTX. EVP_MD_FLAG_ONESHOT indicates
- that the digest can only process a single chunk of data
- (typically because it is provided by a piece of
- hardware). EVP_MD_CTX_FLAG_ONESHOT indicates that the application
- is only going to provide a single chunk of data, and hence the
- framework needn't accumulate the data for oneshot drivers.
- [Ben Laurie]
- *) As with "ERR", make it possible to replace the underlying "ex_data"
- functions. This change also alters the storage and management of global
- ex_data state - it's now all inside ex_data.c and all "class" code (eg.
- RSA, BIO, SSL_CTX, etc) no longer stores its own STACKS and per-class
- index counters. The API functions that use this state have been changed
- to take a "class_index" rather than pointers to the class's local STACK
- and counter, and there is now an API function to dynamically create new
- classes. This centralisation allows us to (a) plug a lot of the
- thread-safety problems that existed, and (b) makes it possible to clean
- up all allocated state using "CRYPTO_cleanup_all_ex_data()". W.r.t. (b)
- such data would previously have always leaked in application code and
- workarounds were in place to make the memory debugging turn a blind eye
- to it. Application code that doesn't use this new function will still
- leak as before, but their memory debugging output will announce it now
- rather than letting it slide.
- Besides the addition of CRYPTO_cleanup_all_ex_data(), another API change
- induced by the "ex_data" overhaul is that X509_STORE_CTX_init() now
- has a return value to indicate success or failure.
- [Geoff Thorpe]
- *) Make it possible to replace the underlying "ERR" functions such that the
- global state (2 LHASH tables and 2 locks) is only used by the "default"
- implementation. This change also adds two functions to "get" and "set"
- the implementation prior to it being automatically set the first time
- any other ERR function takes place. Ie. an application can call "get",
- pass the return value to a module it has just loaded, and that module
- can call its own "set" function using that value. This means the
- module's "ERR" operations will use (and modify) the error state in the
- application and not in its own statically linked copy of OpenSSL code.
- [Geoff Thorpe]
- *) Give DH, DSA, and RSA types their own "**_up_ref()" function to increment
- reference counts. This performs normal REF_PRINT/REF_CHECK macros on
- the operation, and provides a more encapsulated way for external code
- (crypto/evp/ and ssl/) to do this. Also changed the evp and ssl code
- to use these functions rather than manually incrementing the counts.
- Also rename "DSO_up()" function to more descriptive "DSO_up_ref()".
- [Geoff Thorpe]
- *) Add EVP test program.
- [Ben Laurie]
- *) Add symmetric cipher support to ENGINE. Expect the API to change!
- [Ben Laurie]
- *) New CRL functions: X509_CRL_set_version(), X509_CRL_set_issuer_name()
- X509_CRL_set_lastUpdate(), X509_CRL_set_nextUpdate(), X509_CRL_sort(),
- X509_REVOKED_set_serialNumber(), and X509_REVOKED_set_revocationDate().
- These allow a CRL to be built without having to access X509_CRL fields
- directly. Modify 'ca' application to use new functions.
- [Steve Henson]
- *) Move SSL_OP_TLS_ROLLBACK_BUG out of the SSL_OP_ALL list of recommended
- bug workarounds. Rollback attack detection is a security feature.
- The problem will only arise on OpenSSL servers when TLSv1 is not
- available (sslv3_server_method() or SSL_OP_NO_TLSv1).
- Software authors not wanting to support TLSv1 will have special reasons
- for their choice and can explicitly enable this option.
- [Bodo Moeller, Lutz Jaenicke]
- *) Rationalise EVP so it can be extended: don't include a union of
- cipher/digest structures, add init/cleanup functions for EVP_MD_CTX
- (similar to those existing for EVP_CIPHER_CTX).
- Usage example:
- EVP_MD_CTX md;
- EVP_MD_CTX_init(&md); /* new function call */
- EVP_DigestInit(&md, EVP_sha1());
- EVP_DigestUpdate(&md, in, len);
- EVP_DigestFinal(&md, out, NULL);
- EVP_MD_CTX_cleanup(&md); /* new function call */
- [Ben Laurie]
- *) Make DES key schedule conform to the usual scheme, as well as
- correcting its structure. This means that calls to DES functions
- now have to pass a pointer to a des_key_schedule instead of a
- plain des_key_schedule (which was actually always a pointer
- anyway): E.g.,
- des_key_schedule ks;
- des_set_key_checked(..., &ks);
- des_ncbc_encrypt(..., &ks, ...);
- (Note that a later change renames 'des_...' into 'DES_...'.)
- [Ben Laurie]
- *) Initial reduction of linker bloat: the use of some functions, such as
- PEM causes large amounts of unused functions to be linked in due to
- poor organisation. For example pem_all.c contains every PEM function
- which has a knock on effect of linking in large amounts of (unused)
- ASN1 code. Grouping together similar functions and splitting unrelated
- functions prevents this.
- [Steve Henson]
- *) Cleanup of EVP macros.
- [Ben Laurie]
- *) Change historical references to {NID,SN,LN}_des_ede and ede3 to add the
- correct _ecb suffix.
- [Ben Laurie]
- *) Add initial OCSP responder support to ocsp application. The
- revocation information is handled using the text based index
- use by the ca application. The responder can either handle
- requests generated internally, supplied in files (for example
- via a CGI script) or using an internal minimal server.
- [Steve Henson]
- *) Add configuration choices to get zlib compression for TLS.
- [Richard Levitte]
- *) Changes to Kerberos SSL for RFC 2712 compliance:
- 1. Implemented real KerberosWrapper, instead of just using
- KRB5 AP_REQ message. [Thanks to Simon Wilkinson <sxw@sxw.org.uk>]
- 2. Implemented optional authenticator field of KerberosWrapper.
- Added openssl-style ASN.1 macros for Kerberos ticket, ap_req,
- and authenticator structs; see crypto/krb5/.
- Generalized Kerberos calls to support multiple Kerberos libraries.
- [Vern Staats <staatsvr@asc.hpc.mil>,
- Jeffrey Altman <jaltman@columbia.edu>
- via Richard Levitte]
- *) Cause 'openssl speed' to use fully hard-coded DSA keys as it
- already does with RSA. testdsa.h now has 'priv_key/pub_key'
- values for each of the key sizes rather than having just
- parameters (and 'speed' generating keys each time).
- [Geoff Thorpe]
- *) Speed up EVP routines.
- Before:
- encrypt
- type 8 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes
- des-cbc 4408.85k 5560.51k 5778.46k 5862.20k 5825.16k
- des-cbc 4389.55k 5571.17k 5792.23k 5846.91k 5832.11k
- des-cbc 4394.32k 5575.92k 5807.44k 5848.37k 5841.30k
- decrypt
- des-cbc 3482.66k 5069.49k 5496.39k 5614.16k 5639.28k
- des-cbc 3480.74k 5068.76k 5510.34k 5609.87k 5635.52k
- des-cbc 3483.72k 5067.62k 5504.60k 5708.01k 5724.80k
- After:
- encrypt
- des-cbc 4660.16k 5650.19k 5807.19k 5827.13k 5783.32k
- decrypt
- des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k
- [Ben Laurie]
- *) Added the OS2-EMX target.
- ["Brian Havard" <brianh@kheldar.apana.org.au> and Richard Levitte]
- *) Rewrite apps to use NCONF routines instead of the old CONF. New functions
- to support NCONF routines in extension code. New function CONF_set_nconf()
- to allow functions which take an NCONF to also handle the old LHASH
- structure: this means that the old CONF compatible routines can be
- retained (in particular wrt extensions) without having to duplicate the
- code. New function X509V3_add_ext_nconf_sk to add extensions to a stack.
- [Steve Henson]
- *) Enhance the general user interface with mechanisms for inner control
- and with possibilities to have yes/no kind of prompts.
- [Richard Levitte]
- *) Change all calls to low level digest routines in the library and
- applications to use EVP. Add missing calls to HMAC_cleanup() and
- don't assume HMAC_CTX can be copied using memcpy().
- [Verdon Walker <VWalker@novell.com>, Steve Henson]
- *) Add the possibility to control engines through control names but with
- arbitrary arguments instead of just a string.
- Change the key loaders to take a UI_METHOD instead of a callback
- function pointer. NOTE: this breaks binary compatibility with earlier
- versions of OpenSSL [engine].
- Adapt the nCipher code for these new conditions and add a card insertion
- callback.
- [Richard Levitte]
- *) Enhance the general user interface with mechanisms to better support
- dialog box interfaces, application-defined prompts, the possibility
- to use defaults (for example default passwords from somewhere else)
- and interrupts/cancellations.
- [Richard Levitte]
- *) Tidy up PKCS#12 attribute handling. Add support for the CSP name
- attribute in PKCS#12 files, add new -CSP option to pkcs12 utility.
- [Steve Henson]
- *) Fix a memory leak in 'sk_dup()' in the case reallocation fails. (Also
- tidy up some unnecessarily weird code in 'sk_new()').
- [Geoff, reported by Diego Tartara <dtartara@novamens.com>]
- *) Change the key loading routines for ENGINEs to use the same kind
- callback (pem_password_cb) as all other routines that need this
- kind of callback.
- [Richard Levitte]
- *) Increase ENTROPY_NEEDED to 32 bytes, as Rijndael can operate with
- 256 bit (=32 byte) keys. Of course seeding with more entropy bytes
- than this minimum value is recommended.
- [Lutz Jaenicke]
- *) New random seeder for OpenVMS, using the system process statistics
- that are easily reachable.
- [Richard Levitte]
- *) Windows apparently can't transparently handle global
- variables defined in DLLs. Initialisations such as:
- const ASN1_ITEM *it = &ASN1_INTEGER_it;
- wont compile. This is used by the any applications that need to
- declare their own ASN1 modules. This was fixed by adding the option
- EXPORT_VAR_AS_FN to all Win32 platforms, although this isn't strictly
- needed for static libraries under Win32.
- [Steve Henson]
- *) New functions X509_PURPOSE_set() and X509_TRUST_set() to handle
- setting of purpose and trust fields. New X509_STORE trust and
- purpose functions and tidy up setting in other SSL functions.
- [Steve Henson]
- *) Add copies of X509_STORE_CTX fields and callbacks to X509_STORE
- structure. These are inherited by X509_STORE_CTX when it is
- initialised. This allows various defaults to be set in the
- X509_STORE structure (such as flags for CRL checking and custom
- purpose or trust settings) for functions which only use X509_STORE_CTX
- internally such as S/MIME.
- Modify X509_STORE_CTX_purpose_inherit() so it only sets purposes and
- trust settings if they are not set in X509_STORE. This allows X509_STORE
- purposes and trust (in S/MIME for example) to override any set by default.
- Add command line options for CRL checking to smime, s_client and s_server
- applications.
- [Steve Henson]
- *) Initial CRL based revocation checking. If the CRL checking flag(s)
- are set then the CRL is looked up in the X509_STORE structure and
- its validity and signature checked, then if the certificate is found
- in the CRL the verify fails with a revoked error.
- Various new CRL related callbacks added to X509_STORE_CTX structure.
- Command line options added to 'verify' application to support this.
- This needs some additional work, such as being able to handle multiple
- CRLs with different times, extension based lookup (rather than just
- by subject name) and ultimately more complete V2 CRL extension
- handling.
- [Steve Henson]
- *) Add a general user interface API (crypto/ui/). This is designed
- to replace things like des_read_password and friends (backward
- compatibility functions using this new API are provided).
- The purpose is to remove prompting functions from the DES code
- section as well as provide for prompting through dialog boxes in
- a window system and the like.
- [Richard Levitte]
- *) Add "ex_data" support to ENGINE so implementations can add state at a
- per-structure level rather than having to store it globally.
- [Geoff]
- *) Make it possible for ENGINE structures to be copied when retrieved by
- ENGINE_by_id() if the ENGINE specifies a new flag: ENGINE_FLAGS_BY_ID_COPY.
- This causes the "original" ENGINE structure to act like a template,
- analogous to the RSA vs. RSA_METHOD type of separation. Because of this
- operational state can be localised to each ENGINE structure, despite the
- fact they all share the same "methods". New ENGINE structures returned in
- this case have no functional references and the return value is the single
- structural reference. This matches the single structural reference returned
- by ENGINE_by_id() normally, when it is incremented on the pre-existing
- ENGINE structure.
- [Geoff]
- *) Fix ASN1 decoder when decoding type ANY and V_ASN1_OTHER: since this
- needs to match any other type at all we need to manually clear the
- tag cache.
- [Steve Henson]
- *) Changes to the "openssl engine" utility to include;
- - verbosity levels ('-v', '-vv', and '-vvv') that provide information
- about an ENGINE's available control commands.
- - executing control commands from command line arguments using the
- '-pre' and '-post' switches. '-post' is only used if '-t' is
- specified and the ENGINE is successfully initialised. The syntax for
- the individual commands are colon-separated, for example;
- openssl engine chil -pre FORK_CHECK:0 -pre SO_PATH:/lib/test.so
- [Geoff]
- *) New dynamic control command support for ENGINEs. ENGINEs can now
- declare their own commands (numbers), names (strings), descriptions,
- and input types for run-time discovery by calling applications. A
- subset of these commands are implicitly classed as "executable"
- depending on their input type, and only these can be invoked through
- the new string-based API function ENGINE_ctrl_cmd_string(). (Eg. this
- can be based on user input, config files, etc). The distinction is
- that "executable" commands cannot return anything other than a boolean
- result and can only support numeric or string input, whereas some
- discoverable commands may only be for direct use through
- ENGINE_ctrl(), eg. supporting the exchange of binary data, function
- pointers, or other custom uses. The "executable" commands are to
- support parameterisations of ENGINE behaviour that can be
- unambiguously defined by ENGINEs and used consistently across any
- OpenSSL-based application. Commands have been added to all the
- existing hardware-supporting ENGINEs, noticeably "SO_PATH" to allow
- control over shared-library paths without source code alterations.
- [Geoff]
- *) Changed all ENGINE implementations to dynamically allocate their
- ENGINEs rather than declaring them statically. Apart from this being
- necessary with the removal of the ENGINE_FLAGS_MALLOCED distinction,
- this also allows the implementations to compile without using the
- internal engine_int.h header.
- [Geoff]
- *) Minor adjustment to "rand" code. RAND_get_rand_method() now returns a
- 'const' value. Any code that should be able to modify a RAND_METHOD
- should already have non-const pointers to it (ie. they should only
- modify their own ones).
- [Geoff]
- *) Made a variety of little tweaks to the ENGINE code.
- - "atalla" and "ubsec" string definitions were moved from header files
- to C code. "nuron" string definitions were placed in variables
- rather than hard-coded - allowing parameterisation of these values
- later on via ctrl() commands.
- - Removed unused "#if 0"'d code.
- - Fixed engine list iteration code so it uses ENGINE_free() to release
- structural references.
- - Constified the RAND_METHOD element of ENGINE structures.
- - Constified various get/set functions as appropriate and added
- missing functions (including a catch-all ENGINE_cpy that duplicates
- all ENGINE values onto a new ENGINE except reference counts/state).
- - Removed NULL parameter checks in get/set functions. Setting a method
- or function to NULL is a way of cancelling out a previously set
- value. Passing a NULL ENGINE parameter is just plain stupid anyway
- and doesn't justify the extra error symbols and code.
- - Deprecate the ENGINE_FLAGS_MALLOCED define and move the area for
- flags from engine_int.h to engine.h.
- - Changed prototypes for ENGINE handler functions (init(), finish(),
- ctrl(), key-load functions, etc) to take an (ENGINE*) parameter.
- [Geoff]
- *) Implement binary inversion algorithm for BN_mod_inverse in addition
- to the algorithm using long division. The binary algorithm can be
- used only if the modulus is odd. On 32-bit systems, it is faster
- only for relatively small moduli (roughly 20-30% for 128-bit moduli,
- roughly 5-15% for 256-bit moduli), so we use it only for moduli
- up to 450 bits. In 64-bit environments, the binary algorithm
- appears to be advantageous for much longer moduli; here we use it
- for moduli up to 2048 bits.
- [Bodo Moeller]
- *) Rewrite CHOICE field setting in ASN1_item_ex_d2i(). The old code
- could not support the combine flag in choice fields.
- [Steve Henson]
- *) Add a 'copy_extensions' option to the 'ca' utility. This copies
- extensions from a certificate request to the certificate.
- [Steve Henson]
- *) Allow multiple 'certopt' and 'nameopt' options to be separated
- by commas. Add 'namopt' and 'certopt' options to the 'ca' config
- file: this allows the display of the certificate about to be
- signed to be customised, to allow certain fields to be included
- or excluded and extension details. The old system didn't display
- multicharacter strings properly, omitted fields not in the policy
- and couldn't display additional details such as extensions.
- [Steve Henson]
- *) Function EC_POINTs_mul for multiple scalar multiplication
- of an arbitrary number of elliptic curve points
- \sum scalars[i]*points[i],
- optionally including the generator defined for the EC_GROUP:
- scalar*generator + \sum scalars[i]*points[i].
- EC_POINT_mul is a simple wrapper function for the typical case
- that the point list has just one item (besides the optional
- generator).
- [Bodo Moeller]
- *) First EC_METHODs for curves over GF(p):
- EC_GFp_simple_method() uses the basic BN_mod_mul and BN_mod_sqr
- operations and provides various method functions that can also
- operate with faster implementations of modular arithmetic.
- EC_GFp_mont_method() reuses most functions that are part of
- EC_GFp_simple_method, but uses Montgomery arithmetic.
- [Bodo Moeller; point addition and point doubling
- implementation directly derived from source code provided by
- Lenka Fibikova <fibikova@exp-math.uni-essen.de>]
- *) Framework for elliptic curves (crypto/ec/ec.h, crypto/ec/ec_lcl.h,
- crypto/ec/ec_lib.c):
- Curves are EC_GROUP objects (with an optional group generator)
- based on EC_METHODs that are built into the library.
- Points are EC_POINT objects based on EC_GROUP objects.
- Most of the framework would be able to handle curves over arbitrary
- finite fields, but as there are no obvious types for fields other
- than GF(p), some functions are limited to that for now.
- [Bodo Moeller]
- *) Add the -HTTP option to s_server. It is similar to -WWW, but requires
- that the file contains a complete HTTP response.
- [Richard Levitte]
- *) Add the ec directory to mkdef.pl and mkfiles.pl. In mkdef.pl
- change the def and num file printf format specifier from "%-40sXXX"
- to "%-39s XXX". The latter will always guarantee a space after the
- field while the former will cause them to run together if the field
- is 40 of more characters long.
- [Steve Henson]
- *) Constify the cipher and digest 'method' functions and structures
- and modify related functions to take constant EVP_MD and EVP_CIPHER
- pointers.
- [Steve Henson]
- *) Hide BN_CTX structure details in bn_lcl.h instead of publishing them
- in <openssl/bn.h>. Also further increase BN_CTX_NUM to 32.
- [Bodo Moeller]
- *) Modify EVP_Digest*() routines so they now return values. Although the
- internal software routines can never fail additional hardware versions
- might.
- [Steve Henson]
- *) Clean up crypto/err/err.h and change some error codes to avoid conflicts:
- Previously ERR_R_FATAL was too small and coincided with ERR_LIB_PKCS7
- (= ERR_R_PKCS7_LIB); it is now 64 instead of 32.
- ASN1 error codes
- ERR_R_NESTED_ASN1_ERROR
- ...
- ERR_R_MISSING_ASN1_EOS
- were 4 .. 9, conflicting with
- ERR_LIB_RSA (= ERR_R_RSA_LIB)
- ...
- ERR_LIB_PEM (= ERR_R_PEM_LIB).
- They are now 58 .. 63 (i.e., just below ERR_R_FATAL).
- Add new error code 'ERR_R_INTERNAL_ERROR'.
- [Bodo Moeller]
- *) Don't overuse locks in crypto/err/err.c: For data retrieval, CRYPTO_r_lock
- suffices.
- [Bodo Moeller]
- *) New option '-subj arg' for 'openssl req' and 'openssl ca'. This
- sets the subject name for a new request or supersedes the
- subject name in a given request. Formats that can be parsed are
- 'CN=Some Name, OU=myOU, C=IT'
- and
- 'CN=Some Name/OU=myOU/C=IT'.
- Add options '-batch' and '-verbose' to 'openssl req'.
- [Massimiliano Pala <madwolf@hackmasters.net>]
- *) Introduce the possibility to access global variables through
- functions on platform were that's the best way to handle exporting
- global variables in shared libraries. To enable this functionality,
- one must configure with "EXPORT_VAR_AS_FN" or defined the C macro
- "OPENSSL_EXPORT_VAR_AS_FUNCTION" in crypto/opensslconf.h (the latter
- is normally done by Configure or something similar).
- To implement a global variable, use the macro OPENSSL_IMPLEMENT_GLOBAL
- in the source file (foo.c) like this:
- OPENSSL_IMPLEMENT_GLOBAL(int,foo)=1;
- OPENSSL_IMPLEMENT_GLOBAL(double,bar);
- To declare a global variable, use the macros OPENSSL_DECLARE_GLOBAL
- and OPENSSL_GLOBAL_REF in the header file (foo.h) like this:
- OPENSSL_DECLARE_GLOBAL(int,foo);
- #define foo OPENSSL_GLOBAL_REF(foo)
- OPENSSL_DECLARE_GLOBAL(double,bar);
- #define bar OPENSSL_GLOBAL_REF(bar)
- The #defines are very important, and therefore so is including the
- header file everywhere where the defined globals are used.
- The macro OPENSSL_EXPORT_VAR_AS_FUNCTION also affects the definition
- of ASN.1 items, but that structure is a bit different.
- The largest change is in util/mkdef.pl which has been enhanced with
- better and easier to understand logic to choose which symbols should
- go into the Windows .def files as well as a number of fixes and code
- cleanup (among others, algorithm keywords are now sorted
- lexicographically to avoid constant rewrites).
- [Richard Levitte]
- *) In BN_div() keep a copy of the sign of 'num' before writing the
- result to 'rm' because if rm==num the value will be overwritten
- and produce the wrong result if 'num' is negative: this caused
- problems with BN_mod() and BN_nnmod().
- [Steve Henson]
- *) Function OCSP_request_verify(). This checks the signature on an
- OCSP request and verifies the signer certificate. The signer
- certificate is just checked for a generic purpose and OCSP request
- trust settings.
- [Steve Henson]
- *) Add OCSP_check_validity() function to check the validity of OCSP
- responses. OCSP responses are prepared in real time and may only
- be a few seconds old. Simply checking that the current time lies
- between thisUpdate and nextUpdate max reject otherwise valid responses
- caused by either OCSP responder or client clock inaccuracy. Instead
- we allow thisUpdate and nextUpdate to fall within a certain period of
- the current time. The age of the response can also optionally be
- checked. Two new options -validity_period and -status_age added to
- ocsp utility.
- [Steve Henson]
- *) If signature or public key algorithm is unrecognized print out its
- OID rather that just UNKNOWN.
- [Steve Henson]
- *) Change OCSP_cert_to_id() to tolerate a NULL subject certificate and
- OCSP_cert_id_new() a NULL serialNumber. This allows a partial certificate
- ID to be generated from the issuer certificate alone which can then be
- passed to OCSP_id_issuer_cmp().
- [Steve Henson]
- *) New compilation option ASN1_ITEM_FUNCTIONS. This causes the new
- ASN1 modules to export functions returning ASN1_ITEM pointers
- instead of the ASN1_ITEM structures themselves. This adds several
- new macros which allow the underlying ASN1 function/structure to
- be accessed transparently. As a result code should not use ASN1_ITEM
- references directly (such as &X509_it) but instead use the relevant
- macros (such as ASN1_ITEM_rptr(X509)). This option is to allow
- use of the new ASN1 code on platforms where exporting structures
- is problematical (for example in shared libraries) but exporting
- functions returning pointers to structures is not.
- [Steve Henson]
- *) Add support for overriding the generation of SSL/TLS session IDs.
- These callbacks can be registered either in an SSL_CTX or per SSL.
- The purpose of this is to allow applications to control, if they wish,
- the arbitrary values chosen for use as session IDs, particularly as it
- can be useful for session caching in multiple-server environments. A
- command-line switch for testing this (and any client code that wishes
- to use such a feature) has been added to "s_server".
- [Geoff Thorpe, Lutz Jaenicke]
- *) Modify mkdef.pl to recognise and parse preprocessor conditionals
- of the form '#if defined(...) || defined(...) || ...' and
- '#if !defined(...) && !defined(...) && ...'. This also avoids
- the growing number of special cases it was previously handling.
- [Richard Levitte]
- *) Make all configuration macros available for application by making
- sure they are available in opensslconf.h, by giving them names starting
- with "OPENSSL_" to avoid conflicts with other packages and by making
- sure e_os2.h will cover all platform-specific cases together with
- opensslconf.h.
- Additionally, it is now possible to define configuration/platform-
- specific names (called "system identities"). In the C code, these
- are prefixed with "OPENSSL_SYSNAME_". e_os2.h will create another
- macro with the name beginning with "OPENSSL_SYS_", which is determined
- from "OPENSSL_SYSNAME_*" or compiler-specific macros depending on
- what is available.
- [Richard Levitte]
- *) New option -set_serial to 'req' and 'x509' this allows the serial
- number to use to be specified on the command line. Previously self
- signed certificates were hard coded with serial number 0 and the
- CA options of 'x509' had to use a serial number in a file which was
- auto incremented.
- [Steve Henson]
- *) New options to 'ca' utility to support V2 CRL entry extensions.
- Currently CRL reason, invalidity date and hold instruction are
- supported. Add new CRL extensions to V3 code and some new objects.
- [Steve Henson]
- *) New function EVP_CIPHER_CTX_set_padding() this is used to
- disable standard block padding (aka PKCS#5 padding) in the EVP
- API, which was previously mandatory. This means that the data is
- not padded in any way and so the total length much be a multiple
- of the block size, otherwise an error occurs.
- [Steve Henson]
- *) Initial (incomplete) OCSP SSL support.
- [Steve Henson]
- *) New function OCSP_parse_url(). This splits up a URL into its host,
- port and path components: primarily to parse OCSP URLs. New -url
- option to ocsp utility.
- [Steve Henson]
- *) New nonce behavior. The return value of OCSP_check_nonce() now
- reflects the various checks performed. Applications can decide
- whether to tolerate certain situations such as an absent nonce
- in a response when one was present in a request: the ocsp application
- just prints out a warning. New function OCSP_add1_basic_nonce()
- this is to allow responders to include a nonce in a response even if
- the request is nonce-less.
- [Steve Henson]
- *) Disable stdin buffering in load_cert (apps/apps.c) so that no certs are
- skipped when using openssl x509 multiple times on a single input file,
- e.g. "(openssl x509 -out cert1; openssl x509 -out cert2) <certs".
- [Bodo Moeller]
- *) Make ASN1_UTCTIME_set_string() and ASN1_GENERALIZEDTIME_set_string()
- set string type: to handle setting ASN1_TIME structures. Fix ca
- utility to correctly initialize revocation date of CRLs.
- [Steve Henson]
- *) New option SSL_OP_CIPHER_SERVER_PREFERENCE allows the server to override
- the clients preferred ciphersuites and rather use its own preferences.
- Should help to work around M$ SGC (Server Gated Cryptography) bug in
- Internet Explorer by ensuring unchanged hash method during stepup.
- (Also replaces the broken/deactivated SSL_OP_NON_EXPORT_FIRST option.)
- [Lutz Jaenicke]
- *) Make mkdef.pl recognise all DECLARE_ASN1 macros, change rijndael
- to aes and add a new 'exist' option to print out symbols that don't
- appear to exist.
- [Steve Henson]
- *) Additional options to ocsp utility to allow flags to be set and
- additional certificates supplied.
- [Steve Henson]
- *) Add the option -VAfile to 'openssl ocsp', so the user can give the
- OCSP client a number of certificate to only verify the response
- signature against.
- [Richard Levitte]
- *) Update Rijndael code to version 3.0 and change EVP AES ciphers to
- handle the new API. Currently only ECB, CBC modes supported. Add new
- AES OIDs.
- Add TLS AES ciphersuites as described in RFC3268, "Advanced
- Encryption Standard (AES) Ciphersuites for Transport Layer
- Security (TLS)". (In beta versions of OpenSSL 0.9.7, these were
- not enabled by default and were not part of the "ALL" ciphersuite
- alias because they were not yet official; they could be
- explicitly requested by specifying the "AESdraft" ciphersuite
- group alias. In the final release of OpenSSL 0.9.7, the group
- alias is called "AES" and is part of "ALL".)
- [Ben Laurie, Steve Henson, Bodo Moeller]
- *) New function OCSP_copy_nonce() to copy nonce value (if present) from
- request to response.
- [Steve Henson]
- *) Functions for OCSP responders. OCSP_request_onereq_count(),
- OCSP_request_onereq_get0(), OCSP_onereq_get0_id() and OCSP_id_get0_info()
- extract information from a certificate request. OCSP_response_create()
- creates a response and optionally adds a basic response structure.
- OCSP_basic_add1_status() adds a complete single response to a basic
- response and returns the OCSP_SINGLERESP structure just added (to allow
- extensions to be included for example). OCSP_basic_add1_cert() adds a
- certificate to a basic response and OCSP_basic_sign() signs a basic
- response with various flags. New helper functions ASN1_TIME_check()
- (checks validity of ASN1_TIME structure) and ASN1_TIME_to_generalizedtime()
- (converts ASN1_TIME to GeneralizedTime).
- [Steve Henson]
- *) Various new functions. EVP_Digest() combines EVP_Digest{Init,Update,Final}()
- in a single operation. X509_get0_pubkey_bitstr() extracts the public_key
- structure from a certificate. X509_pubkey_digest() digests the public_key
- contents: this is used in various key identifiers.
- [Steve Henson]
- *) Make sk_sort() tolerate a NULL argument.
- [Steve Henson reported by Massimiliano Pala <madwolf@comune.modena.it>]
- *) New OCSP verify flag OCSP_TRUSTOTHER. When set the "other" certificates
- passed by the function are trusted implicitly. If any of them signed the
- response then it is assumed to be valid and is not verified.
- [Steve Henson]
- *) In PKCS7_set_type() initialise content_type in PKCS7_ENC_CONTENT
- to data. This was previously part of the PKCS7 ASN1 code. This
- was causing problems with OpenSSL created PKCS#12 and PKCS#7 structures.
- [Steve Henson, reported by Kenneth R. Robinette
- <support@securenetterm.com>]
- *) Add CRYPTO_push_info() and CRYPTO_pop_info() calls to new ASN1
- routines: without these tracing memory leaks is very painful.
- Fix leaks in PKCS12 and PKCS7 routines.
- [Steve Henson]
- *) Make X509_time_adj() cope with the new behaviour of ASN1_TIME_new().
- Previously it initialised the 'type' argument to V_ASN1_UTCTIME which
- effectively meant GeneralizedTime would never be used. Now it
- is initialised to -1 but X509_time_adj() now has to check the value
- and use ASN1_TIME_set() if the value is not V_ASN1_UTCTIME or
- V_ASN1_GENERALIZEDTIME, without this it always uses GeneralizedTime.
- [Steve Henson, reported by Kenneth R. Robinette
- <support@securenetterm.com>]
- *) Fixes to BN_to_ASN1_INTEGER when bn is zero. This would previously
- result in a zero length in the ASN1_INTEGER structure which was
- not consistent with the structure when d2i_ASN1_INTEGER() was used
- and would cause ASN1_INTEGER_cmp() to fail. Enhance s2i_ASN1_INTEGER()
- to cope with hex and negative integers. Fix bug in i2a_ASN1_INTEGER()
- where it did not print out a minus for negative ASN1_INTEGER.
- [Steve Henson]
- *) Add summary printout to ocsp utility. The various functions which
- convert status values to strings have been renamed to:
- OCSP_response_status_str(), OCSP_cert_status_str() and
- OCSP_crl_reason_str() and are no longer static. New options
- to verify nonce values and to disable verification. OCSP response
- printout format cleaned up.
- [Steve Henson]
- *) Add additional OCSP certificate checks. These are those specified
- in RFC2560. This consists of two separate checks: the CA of the
- certificate being checked must either be the OCSP signer certificate
- or the issuer of the OCSP signer certificate. In the latter case the
- OCSP signer certificate must contain the OCSP signing extended key
- usage. This check is performed by attempting to match the OCSP
- signer or the OCSP signer CA to the issuerNameHash and issuerKeyHash
- in the OCSP_CERTID structures of the response.
- [Steve Henson]
- *) Initial OCSP certificate verification added to OCSP_basic_verify()
- and related routines. This uses the standard OpenSSL certificate
- verify routines to perform initial checks (just CA validity) and
- to obtain the certificate chain. Then additional checks will be
- performed on the chain. Currently the root CA is checked to see
- if it is explicitly trusted for OCSP signing. This is used to set
- a root CA as a global signing root: that is any certificate that
- chains to that CA is an acceptable OCSP signing certificate.
- [Steve Henson]
- *) New '-extfile ...' option to 'openssl ca' for reading X.509v3
- extensions from a separate configuration file.
- As when reading extensions from the main configuration file,
- the '-extensions ...' option may be used for specifying the
- section to use.
- [Massimiliano Pala <madwolf@comune.modena.it>]
- *) New OCSP utility. Allows OCSP requests to be generated or
- read. The request can be sent to a responder and the output
- parsed, outputed or printed in text form. Not complete yet:
- still needs to check the OCSP response validity.
- [Steve Henson]
- *) New subcommands for 'openssl ca':
- 'openssl ca -status <serial>' prints the status of the cert with
- the given serial number (according to the index file).
- 'openssl ca -updatedb' updates the expiry status of certificates
- in the index file.
- [Massimiliano Pala <madwolf@comune.modena.it>]
- *) New '-newreq-nodes' command option to CA.pl. This is like
- '-newreq', but calls 'openssl req' with the '-nodes' option
- so that the resulting key is not encrypted.
- [Damien Miller <djm@mindrot.org>]
- *) New configuration for the GNU Hurd.
- [Jonathan Bartlett <johnnyb@wolfram.com> via Richard Levitte]
- *) Initial code to implement OCSP basic response verify. This
- is currently incomplete. Currently just finds the signer's
- certificate and verifies the signature on the response.
- [Steve Henson]
- *) New SSLeay_version code SSLEAY_DIR to determine the compiled-in
- value of OPENSSLDIR. This is available via the new '-d' option
- to 'openssl version', and is also included in 'openssl version -a'.
- [Bodo Moeller]
- *) Allowing defining memory allocation callbacks that will be given
- file name and line number information in additional arguments
- (a const char* and an int). The basic functionality remains, as
- well as the original possibility to just replace malloc(),
- realloc() and free() by functions that do not know about these
- additional arguments. To register and find out the current
- settings for extended allocation functions, the following
- functions are provided:
- CRYPTO_set_mem_ex_functions
- CRYPTO_set_locked_mem_ex_functions
- CRYPTO_get_mem_ex_functions
- CRYPTO_get_locked_mem_ex_functions
- These work the same way as CRYPTO_set_mem_functions and friends.
- CRYPTO_get_[locked_]mem_functions now writes 0 where such an
- extended allocation function is enabled.
- Similarly, CRYPTO_get_[locked_]mem_ex_functions writes 0 where
- a conventional allocation function is enabled.
- [Richard Levitte, Bodo Moeller]
- *) Finish off removing the remaining LHASH function pointer casts.
- There should no longer be any prototype-casting required when using
- the LHASH abstraction, and any casts that remain are "bugs". See
- the callback types and macros at the head of lhash.h for details
- (and "OBJ_cleanup" in crypto/objects/obj_dat.c as an example).
- [Geoff Thorpe]
- *) Add automatic query of EGD sockets in RAND_poll() for the unix variant.
- If /dev/[u]random devices are not available or do not return enough
- entropy, EGD style sockets (served by EGD or PRNGD) will automatically
- be queried.
- The locations /var/run/egd-pool, /dev/egd-pool, /etc/egd-pool, and
- /etc/entropy will be queried once each in this sequence, quering stops
- when enough entropy was collected without querying more sockets.
- [Lutz Jaenicke]
- *) Change the Unix RAND_poll() variant to be able to poll several
- random devices, as specified by DEVRANDOM, until a sufficient amount
- of data has been collected. We spend at most 10 ms on each file
- (select timeout) and read in non-blocking mode. DEVRANDOM now
- defaults to the list "/dev/urandom", "/dev/random", "/dev/srandom"
- (previously it was just the string "/dev/urandom"), so on typical
- platforms the 10 ms delay will never occur.
- Also separate out the Unix variant to its own file, rand_unix.c.
- For VMS, there's a currently-empty rand_vms.c.
- [Richard Levitte]
- *) Move OCSP client related routines to ocsp_cl.c. These
- provide utility functions which an application needing
- to issue a request to an OCSP responder and analyse the
- response will typically need: as opposed to those which an
- OCSP responder itself would need which will be added later.
- OCSP_request_sign() signs an OCSP request with an API similar
- to PKCS7_sign(). OCSP_response_status() returns status of OCSP
- response. OCSP_response_get1_basic() extracts basic response
- from response. OCSP_resp_find_status(): finds and extracts status
- information from an OCSP_CERTID structure (which will be created
- when the request structure is built). These are built from lower
- level functions which work on OCSP_SINGLERESP structures but
- wont normally be used unless the application wishes to examine
- extensions in the OCSP response for example.
- Replace nonce routines with a pair of functions.
- OCSP_request_add1_nonce() adds a nonce value and optionally
- generates a random value. OCSP_check_nonce() checks the
- validity of the nonce in an OCSP response.
- [Steve Henson]
- *) Change function OCSP_request_add() to OCSP_request_add0_id().
- This doesn't copy the supplied OCSP_CERTID and avoids the
- need to free up the newly created id. Change return type
- to OCSP_ONEREQ to return the internal OCSP_ONEREQ structure.
- This can then be used to add extensions to the request.
- Deleted OCSP_request_new(), since most of its functionality
- is now in OCSP_REQUEST_new() (and the case insensitive name
- clash) apart from the ability to set the request name which
- will be added elsewhere.
- [Steve Henson]
- *) Update OCSP API. Remove obsolete extensions argument from
- various functions. Extensions are now handled using the new
- OCSP extension code. New simple OCSP HTTP function which
- can be used to send requests and parse the response.
- [Steve Henson]
- *) Fix the PKCS#7 (S/MIME) code to work with new ASN1. Two new
- ASN1_ITEM structures help with sign and verify. PKCS7_ATTR_SIGN
- uses the special reorder version of SET OF to sort the attributes
- and reorder them to match the encoded order. This resolves a long
- standing problem: a verify on a PKCS7 structure just after signing
- it used to fail because the attribute order did not match the
- encoded order. PKCS7_ATTR_VERIFY does not reorder the attributes:
- it uses the received order. This is necessary to tolerate some broken
- software that does not order SET OF. This is handled by encoding
- as a SEQUENCE OF but using implicit tagging (with UNIVERSAL class)
- to produce the required SET OF.
- [Steve Henson]
- *) Have mk1mf.pl generate the macros OPENSSL_BUILD_SHLIBCRYPTO and
- OPENSSL_BUILD_SHLIBSSL and use them appropriately in the header
- files to get correct declarations of the ASN.1 item variables.
- [Richard Levitte]
- *) Rewrite of PKCS#12 code to use new ASN1 functionality. Replace many
- PKCS#12 macros with real functions. Fix two unrelated ASN1 bugs:
- asn1_check_tlen() would sometimes attempt to use 'ctx' when it was
- NULL and ASN1_TYPE was not dereferenced properly in asn1_ex_c2i().
- New ASN1 macro: DECLARE_ASN1_ITEM() which just declares the relevant
- ASN1_ITEM and no wrapper functions.
- [Steve Henson]
- *) New functions or ASN1_item_d2i_fp() and ASN1_item_d2i_bio(). These
- replace the old function pointer based I/O routines. Change most of
- the *_d2i_bio() and *_d2i_fp() functions to use these.
- [Steve Henson]
- *) Enhance mkdef.pl to be more accepting about spacing in C preprocessor
- lines, recognice more "algorithms" that can be deselected, and make
- it complain about algorithm deselection that isn't recognised.
- [Richard Levitte]
- *) New ASN1 functions to handle dup, sign, verify, digest, pack and
- unpack operations in terms of ASN1_ITEM. Modify existing wrappers
- to use new functions. Add NO_ASN1_OLD which can be set to remove
- some old style ASN1 functions: this can be used to determine if old
- code will still work when these eventually go away.
- [Steve Henson]
- *) New extension functions for OCSP structures, these follow the
- same conventions as certificates and CRLs.
- [Steve Henson]
- *) New function X509V3_add1_i2d(). This automatically encodes and
- adds an extension. Its behaviour can be customised with various
- flags to append, replace or delete. Various wrappers added for
- certifcates and CRLs.
- [Steve Henson]
- *) Fix to avoid calling the underlying ASN1 print routine when
- an extension cannot be parsed. Correct a typo in the
- OCSP_SERVICELOC extension. Tidy up print OCSP format.
- [Steve Henson]
- *) Make mkdef.pl parse some of the ASN1 macros and add apropriate
- entries for variables.
- [Steve Henson]
- *) Add functionality to apps/openssl.c for detecting locking
- problems: As the program is single-threaded, all we have
- to do is register a locking callback using an array for
- storing which locks are currently held by the program.
- [Bodo Moeller]
- *) Use a lock around the call to CRYPTO_get_ex_new_index() in
- SSL_get_ex_data_X509_STORE_idx(), which is used in
- ssl_verify_cert_chain() and thus can be called at any time
- during TLS/SSL handshakes so that thread-safety is essential.
- Unfortunately, the ex_data design is not at all suited
- for multi-threaded use, so it probably should be abolished.
- [Bodo Moeller]
- *) Added Broadcom "ubsec" ENGINE to OpenSSL.
- [Broadcom, tweaked and integrated by Geoff Thorpe]
- *) Move common extension printing code to new function
- X509V3_print_extensions(). Reorganise OCSP print routines and
- implement some needed OCSP ASN1 functions. Add OCSP extensions.
- [Steve Henson]
- *) New function X509_signature_print() to remove duplication in some
- print routines.
- [Steve Henson]
- *) Add a special meaning when SET OF and SEQUENCE OF flags are both
- set (this was treated exactly the same as SET OF previously). This
- is used to reorder the STACK representing the structure to match the
- encoding. This will be used to get round a problem where a PKCS7
- structure which was signed could not be verified because the STACK
- order did not reflect the encoded order.
- [Steve Henson]
- *) Reimplement the OCSP ASN1 module using the new code.
- [Steve Henson]
- *) Update the X509V3 code to permit the use of an ASN1_ITEM structure
- for its ASN1 operations. The old style function pointers still exist
- for now but they will eventually go away.
- [Steve Henson]
- *) Merge in replacement ASN1 code from the ASN1 branch. This almost
- completely replaces the old ASN1 functionality with a table driven
- encoder and decoder which interprets an ASN1_ITEM structure describing
- the ASN1 module. Compatibility with the existing ASN1 API (i2d,d2i) is
- largely maintained. Almost all of the old asn1_mac.h macro based ASN1
- has also been converted to the new form.
- [Steve Henson]
- *) Change BN_mod_exp_recp so that negative moduli are tolerated
- (the sign is ignored). Similarly, ignore the sign in BN_MONT_CTX_set
- so that BN_mod_exp_mont and BN_mod_exp_mont_word work
- for negative moduli.
- [Bodo Moeller]
- *) Fix BN_uadd and BN_usub: Always return non-negative results instead
- of not touching the result's sign bit.
- [Bodo Moeller]
- *) BN_div bugfix: If the result is 0, the sign (res->neg) must not be
- set.
- [Bodo Moeller]
- *) Changed the LHASH code to use prototypes for callbacks, and created
- macros to declare and implement thin (optionally static) functions
- that provide type-safety and avoid function pointer casting for the
- type-specific callbacks.
- [Geoff Thorpe]
- *) Added Kerberos Cipher Suites to be used with TLS, as written in
- RFC 2712.
- [Veers Staats <staatsvr@asc.hpc.mil>,
- Jeffrey Altman <jaltman@columbia.edu>, via Richard Levitte]
- *) Reformat the FAQ so the different questions and answers can be divided
- in sections depending on the subject.
- [Richard Levitte]
- *) Have the zlib compression code load ZLIB.DLL dynamically under
- Windows.
- [Richard Levitte]
- *) New function BN_mod_sqrt for computing square roots modulo a prime
- (using the probabilistic Tonelli-Shanks algorithm unless
- p == 3 (mod 4) or p == 5 (mod 8), which are cases that can
- be handled deterministically).
- [Lenka Fibikova <fibikova@exp-math.uni-essen.de>, Bodo Moeller]
- *) Make BN_mod_inverse faster by explicitly handling small quotients
- in the Euclid loop. (Speed gain about 20% for small moduli [256 or
- 512 bits], about 30% for larger ones [1024 or 2048 bits].)
- [Bodo Moeller]
- *) New function BN_kronecker.
- [Bodo Moeller]
- *) Fix BN_gcd so that it works on negative inputs; the result is
- positive unless both parameters are zero.
- Previously something reasonably close to an infinite loop was
- possible because numbers could be growing instead of shrinking
- in the implementation of Euclid's algorithm.
- [Bodo Moeller]
- *) Fix BN_is_word() and BN_is_one() macros to take into account the
- sign of the number in question.
- Fix BN_is_word(a,w) to work correctly for w == 0.
- The old BN_is_word(a,w) macro is now called BN_abs_is_word(a,w)
- because its test if the absolute value of 'a' equals 'w'.
- Note that BN_abs_is_word does *not* handle w == 0 reliably;
- it exists mostly for use in the implementations of BN_is_zero(),
- BN_is_one(), and BN_is_word().
- [Bodo Moeller]
- *) New function BN_swap.
- [Bodo Moeller]
- *) Use BN_nnmod instead of BN_mod in crypto/bn/bn_exp.c so that
- the exponentiation functions are more likely to produce reasonable
- results on negative inputs.
- [Bodo Moeller]
- *) Change BN_mod_mul so that the result is always non-negative.
- Previously, it could be negative if one of the factors was negative;
- I don't think anyone really wanted that behaviour.
- [Bodo Moeller]
- *) Move BN_mod_... functions into new file crypto/bn/bn_mod.c
- (except for exponentiation, which stays in crypto/bn/bn_exp.c,
- and BN_mod_mul_reciprocal, which stays in crypto/bn/bn_recp.c)
- and add new functions:
- BN_nnmod
- BN_mod_sqr
- BN_mod_add
- BN_mod_add_quick
- BN_mod_sub
- BN_mod_sub_quick
- BN_mod_lshift1
- BN_mod_lshift1_quick
- BN_mod_lshift
- BN_mod_lshift_quick
- These functions always generate non-negative results.
- BN_nnmod otherwise is like BN_mod (if BN_mod computes a remainder r
- such that |m| < r < 0, BN_nnmod will output rem + |m| instead).
- BN_mod_XXX_quick(r, a, [b,] m) generates the same result as
- BN_mod_XXX(r, a, [b,] m, ctx), but requires that a [and b]
- be reduced modulo m.
- [Lenka Fibikova <fibikova@exp-math.uni-essen.de>, Bodo Moeller]
- #if 0
- The following entry accidentily appeared in the CHANGES file
- distributed with OpenSSL 0.9.7. The modifications described in
- it do *not* apply to OpenSSL 0.9.7.
- *) Remove a few calls to bn_wexpand() in BN_sqr() (the one in there
- was actually never needed) and in BN_mul(). The removal in BN_mul()
- required a small change in bn_mul_part_recursive() and the addition
- of the functions bn_cmp_part_words(), bn_sub_part_words() and
- bn_add_part_words(), which do the same thing as bn_cmp_words(),
- bn_sub_words() and bn_add_words() except they take arrays with
- differing sizes.
- [Richard Levitte]
- #endif
- *) In 'openssl passwd', verify passwords read from the terminal
- unless the '-salt' option is used (which usually means that
- verification would just waste user's time since the resulting
- hash is going to be compared with some given password hash)
- or the new '-noverify' option is used.
- This is an incompatible change, but it does not affect
- non-interactive use of 'openssl passwd' (passwords on the command
- line, '-stdin' option, '-in ...' option) and thus should not
- cause any problems.
- [Bodo Moeller]
- *) Remove all references to RSAref, since there's no more need for it.
- [Richard Levitte]
- *) Make DSO load along a path given through an environment variable
- (SHLIB_PATH) with shl_load().
- [Richard Levitte]
- *) Constify the ENGINE code as a result of BIGNUM constification.
- Also constify the RSA code and most things related to it. In a
- few places, most notable in the depth of the ASN.1 code, ugly
- casts back to non-const were required (to be solved at a later
- time)
- [Richard Levitte]
- *) Make it so the openssl application has all engines loaded by default.
- [Richard Levitte]
- *) Constify the BIGNUM routines a little more.
- [Richard Levitte]
- *) Add the following functions:
- ENGINE_load_cswift()
- ENGINE_load_chil()
- ENGINE_load_atalla()
- ENGINE_load_nuron()
- ENGINE_load_builtin_engines()
- That way, an application can itself choose if external engines that
- are built-in in OpenSSL shall ever be used or not. The benefit is
- that applications won't have to be linked with libdl or other dso
- libraries unless it's really needed.
- Changed 'openssl engine' to load all engines on demand.
- Changed the engine header files to avoid the duplication of some
- declarations (they differed!).
- [Richard Levitte]
- *) 'openssl engine' can now list capabilities.
- [Richard Levitte]
- *) Better error reporting in 'openssl engine'.
- [Richard Levitte]
- *) Never call load_dh_param(NULL) in s_server.
- [Bodo Moeller]
- *) Add engine application. It can currently list engines by name and
- identity, and test if they are actually available.
- [Richard Levitte]
- *) Improve RPM specification file by forcing symbolic linking and making
- sure the installed documentation is also owned by root.root.
- [Damien Miller <djm@mindrot.org>]
- *) Give the OpenSSL applications more possibilities to make use of
- keys (public as well as private) handled by engines.
- [Richard Levitte]
- *) Add OCSP code that comes from CertCo.
- [Richard Levitte]
- *) Add VMS support for the Rijndael code.
- [Richard Levitte]
- *) Added untested support for Nuron crypto accelerator.
- [Ben Laurie]
- *) Add support for external cryptographic devices. This code was
- previously distributed separately as the "engine" branch.
- [Geoff Thorpe, Richard Levitte]
- *) Rework the filename-translation in the DSO code. It is now possible to
- have far greater control over how a "name" is turned into a filename
- depending on the operating environment and any oddities about the
- different shared library filenames on each system.
- [Geoff Thorpe]
- *) Support threads on FreeBSD-elf in Configure.
- [Richard Levitte]
- *) Fix for SHA1 assembly problem with MASM: it produces
- warnings about corrupt line number information when assembling
- with debugging information. This is caused by the overlapping
- of two sections.
- [Bernd Matthes <mainbug@celocom.de>, Steve Henson]
- *) NCONF changes.
- NCONF_get_number() has no error checking at all. As a replacement,
- NCONF_get_number_e() is defined (_e for "error checking") and is
- promoted strongly. The old NCONF_get_number is kept around for
- binary backward compatibility.
- Make it possible for methods to load from something other than a BIO,
- by providing a function pointer that is given a name instead of a BIO.
- For example, this could be used to load configuration data from an
- LDAP server.
- [Richard Levitte]
- *) Fix for non blocking accept BIOs. Added new I/O special reason
- BIO_RR_ACCEPT to cover this case. Previously use of accept BIOs
- with non blocking I/O was not possible because no retry code was
- implemented. Also added new SSL code SSL_WANT_ACCEPT to cover
- this case.
- [Steve Henson]
- *) Added the beginnings of Rijndael support.
- [Ben Laurie]
- *) Fix for bug in DirectoryString mask setting. Add support for
- X509_NAME_print_ex() in 'req' and X509_print_ex() function
- to allow certificate printing to more controllable, additional
- 'certopt' option to 'x509' to allow new printing options to be
- set.
- [Steve Henson]
- *) Clean old EAY MD5 hack from e_os.h.
- [Richard Levitte]
- Changes between 0.9.6l and 0.9.6m [17 Mar 2004]
- *) Fix null-pointer assignment in do_change_cipher_spec() revealed
- by using the Codenomicon TLS Test Tool (CVE-2004-0079)
- [Joe Orton, Steve Henson]
- Changes between 0.9.6k and 0.9.6l [04 Nov 2003]
- *) Fix additional bug revealed by the NISCC test suite:
- Stop bug triggering large recursion when presented with
- certain ASN.1 tags (CVE-2003-0851)
- [Steve Henson]
- Changes between 0.9.6j and 0.9.6k [30 Sep 2003]
- *) Fix various bugs revealed by running the NISCC test suite:
- Stop out of bounds reads in the ASN1 code when presented with
- invalid tags (CVE-2003-0543 and CVE-2003-0544).
-
- If verify callback ignores invalid public key errors don't try to check
- certificate signature with the NULL public key.
- [Steve Henson]
- *) In ssl3_accept() (ssl/s3_srvr.c) only accept a client certificate
- if the server requested one: as stated in TLS 1.0 and SSL 3.0
- specifications.
- [Steve Henson]
- *) In ssl3_get_client_hello() (ssl/s3_srvr.c), tolerate additional
- extra data after the compression methods not only for TLS 1.0
- but also for SSL 3.0 (as required by the specification).
- [Bodo Moeller; problem pointed out by Matthias Loepfe]
- *) Change X509_certificate_type() to mark the key as exported/exportable
- when it's 512 *bits* long, not 512 bytes.
- [Richard Levitte]
- Changes between 0.9.6i and 0.9.6j [10 Apr 2003]
- *) Countermeasure against the Klima-Pokorny-Rosa extension of
- Bleichbacher's attack on PKCS #1 v1.5 padding: treat
- a protocol version number mismatch like a decryption error
- in ssl3_get_client_key_exchange (ssl/s3_srvr.c).
- [Bodo Moeller]
- *) Turn on RSA blinding by default in the default implementation
- to avoid a timing attack. Applications that don't want it can call
- RSA_blinding_off() or use the new flag RSA_FLAG_NO_BLINDING.
- They would be ill-advised to do so in most cases.
- [Ben Laurie, Steve Henson, Geoff Thorpe, Bodo Moeller]
- *) Change RSA blinding code so that it works when the PRNG is not
- seeded (in this case, the secret RSA exponent is abused as
- an unpredictable seed -- if it is not unpredictable, there
- is no point in blinding anyway). Make RSA blinding thread-safe
- by remembering the creator's thread ID in rsa->blinding and
- having all other threads use local one-time blinding factors
- (this requires more computation than sharing rsa->blinding, but
- avoids excessive locking; and if an RSA object is not shared
- between threads, blinding will still be very fast).
- [Bodo Moeller]
- Changes between 0.9.6h and 0.9.6i [19 Feb 2003]
- *) In ssl3_get_record (ssl/s3_pkt.c), minimize information leaked
- via timing by performing a MAC computation even if incorrrect
- block cipher padding has been found. This is a countermeasure
- against active attacks where the attacker has to distinguish
- between bad padding and a MAC verification error. (CVE-2003-0078)
- [Bodo Moeller; problem pointed out by Brice Canvel (EPFL),
- Alain Hiltgen (UBS), Serge Vaudenay (EPFL), and
- Martin Vuagnoux (EPFL, Ilion)]
- Changes between 0.9.6g and 0.9.6h [5 Dec 2002]
- *) New function OPENSSL_cleanse(), which is used to cleanse a section of
- memory from it's contents. This is done with a counter that will
- place alternating values in each byte. This can be used to solve
- two issues: 1) the removal of calls to memset() by highly optimizing
- compilers, and 2) cleansing with other values than 0, since those can
- be read through on certain media, for example a swap space on disk.
- [Geoff Thorpe]
- *) Bugfix: client side session caching did not work with external caching,
- because the session->cipher setting was not restored when reloading
- from the external cache. This problem was masked, when
- SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG (part of SSL_OP_ALL) was set.
- (Found by Steve Haslam <steve@araqnid.ddts.net>.)
- [Lutz Jaenicke]
- *) Fix client_certificate (ssl/s2_clnt.c): The permissible total
- length of the REQUEST-CERTIFICATE message is 18 .. 34, not 17 .. 33.
- [Zeev Lieber <zeev-l@yahoo.com>]
- *) Undo an undocumented change introduced in 0.9.6e which caused
- repeated calls to OpenSSL_add_all_ciphers() and
- OpenSSL_add_all_digests() to be ignored, even after calling
- EVP_cleanup().
- [Richard Levitte]
- *) Change the default configuration reader to deal with last line not
- being properly terminated.
- [Richard Levitte]
- *) Change X509_NAME_cmp() so it applies the special rules on handling
- DN values that are of type PrintableString, as well as RDNs of type
- emailAddress where the value has the type ia5String.
- [stefank@valicert.com via Richard Levitte]
- *) Add a SSL_SESS_CACHE_NO_INTERNAL_STORE flag to take over half
- the job SSL_SESS_CACHE_NO_INTERNAL_LOOKUP was inconsistently
- doing, define a new flag (SSL_SESS_CACHE_NO_INTERNAL) to be
- the bitwise-OR of the two for use by the majority of applications
- wanting this behaviour, and update the docs. The documented
- behaviour and actual behaviour were inconsistent and had been
- changing anyway, so this is more a bug-fix than a behavioural
- change.
- [Geoff Thorpe, diagnosed by Nadav Har'El]
- *) Don't impose a 16-byte length minimum on session IDs in ssl/s3_clnt.c
- (the SSL 3.0 and TLS 1.0 specifications allow any length up to 32 bytes).
- [Bodo Moeller]
- *) Fix initialization code race conditions in
- SSLv23_method(), SSLv23_client_method(), SSLv23_server_method(),
- SSLv2_method(), SSLv2_client_method(), SSLv2_server_method(),
- SSLv3_method(), SSLv3_client_method(), SSLv3_server_method(),
- TLSv1_method(), TLSv1_client_method(), TLSv1_server_method(),
- ssl2_get_cipher_by_char(),
- ssl3_get_cipher_by_char().
- [Patrick McCormick <patrick@tellme.com>, Bodo Moeller]
- *) Reorder cleanup sequence in SSL_CTX_free(): only remove the ex_data after
- the cached sessions are flushed, as the remove_cb() might use ex_data
- contents. Bug found by Sam Varshavchik <mrsam@courier-mta.com>
- (see [openssl.org #212]).
- [Geoff Thorpe, Lutz Jaenicke]
- *) Fix typo in OBJ_txt2obj which incorrectly passed the content
- length, instead of the encoding length to d2i_ASN1_OBJECT.
- [Steve Henson]
- Changes between 0.9.6f and 0.9.6g [9 Aug 2002]
- *) [In 0.9.6g-engine release:]
- Fix crypto/engine/vendor_defns/cswift.h for WIN32 (use '_stdcall').
- [Lynn Gazis <lgazis@rainbow.com>]
- Changes between 0.9.6e and 0.9.6f [8 Aug 2002]
- *) Fix ASN1 checks. Check for overflow by comparing with LONG_MAX
- and get fix the header length calculation.
- [Florian Weimer <Weimer@CERT.Uni-Stuttgart.DE>,
- Alon Kantor <alonk@checkpoint.com> (and others),
- Steve Henson]
- *) Use proper error handling instead of 'assertions' in buffer
- overflow checks added in 0.9.6e. This prevents DoS (the
- assertions could call abort()).
- [Arne Ansper <arne@ats.cyber.ee>, Bodo Moeller]
- Changes between 0.9.6d and 0.9.6e [30 Jul 2002]
- *) Add various sanity checks to asn1_get_length() to reject
- the ASN1 length bytes if they exceed sizeof(long), will appear
- negative or the content length exceeds the length of the
- supplied buffer.
- [Steve Henson, Adi Stav <stav@mercury.co.il>, James Yonan <jim@ntlp.com>]
- *) Fix cipher selection routines: ciphers without encryption had no flags
- for the cipher strength set and where therefore not handled correctly
- by the selection routines (PR #130).
- [Lutz Jaenicke]
- *) Fix EVP_dsa_sha macro.
- [Nils Larsch]
- *) New option
- SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS
- for disabling the SSL 3.0/TLS 1.0 CBC vulnerability countermeasure
- that was added in OpenSSL 0.9.6d.
- As the countermeasure turned out to be incompatible with some
- broken SSL implementations, the new option is part of SSL_OP_ALL.
- SSL_OP_ALL is usually employed when compatibility with weird SSL
- implementations is desired (e.g. '-bugs' option to 's_client' and
- 's_server'), so the new option is automatically set in many
- applications.
- [Bodo Moeller]
- *) Changes in security patch:
- Changes marked "(CHATS)" were sponsored by the Defense Advanced
- Research Projects Agency (DARPA) and Air Force Research Laboratory,
- Air Force Materiel Command, USAF, under agreement number
- F30602-01-2-0537.
- *) Add various sanity checks to asn1_get_length() to reject
- the ASN1 length bytes if they exceed sizeof(long), will appear
- negative or the content length exceeds the length of the
- supplied buffer. (CVE-2002-0659)
- [Steve Henson, Adi Stav <stav@mercury.co.il>, James Yonan <jim@ntlp.com>]
- *) Assertions for various potential buffer overflows, not known to
- happen in practice.
- [Ben Laurie (CHATS)]
- *) Various temporary buffers to hold ASCII versions of integers were
- too small for 64 bit platforms. (CVE-2002-0655)
- [Matthew Byng-Maddick <mbm@aldigital.co.uk> and Ben Laurie (CHATS)>
- *) Remote buffer overflow in SSL3 protocol - an attacker could
- supply an oversized session ID to a client. (CVE-2002-0656)
- [Ben Laurie (CHATS)]
- *) Remote buffer overflow in SSL2 protocol - an attacker could
- supply an oversized client master key. (CVE-2002-0656)
- [Ben Laurie (CHATS)]
- Changes between 0.9.6c and 0.9.6d [9 May 2002]
- *) Fix crypto/asn1/a_sign.c so that 'parameters' is omitted (not
- encoded as NULL) with id-dsa-with-sha1.
- [Nils Larsch <nla@trustcenter.de>; problem pointed out by Bodo Moeller]
- *) Check various X509_...() return values in apps/req.c.
- [Nils Larsch <nla@trustcenter.de>]
- *) Fix BASE64 decode (EVP_DecodeUpdate) for data with CR/LF ended lines:
- an end-of-file condition would erronously be flagged, when the CRLF
- was just at the end of a processed block. The bug was discovered when
- processing data through a buffering memory BIO handing the data to a
- BASE64-decoding BIO. Bug fund and patch submitted by Pavel Tsekov
- <ptsekov@syntrex.com> and Nedelcho Stanev.
- [Lutz Jaenicke]
- *) Implement a countermeasure against a vulnerability recently found
- in CBC ciphersuites in SSL 3.0/TLS 1.0: Send an empty fragment
- before application data chunks to avoid the use of known IVs
- with data potentially chosen by the attacker.
- [Bodo Moeller]
- *) Fix length checks in ssl3_get_client_hello().
- [Bodo Moeller]
- *) TLS/SSL library bugfix: use s->s3->in_read_app_data differently
- to prevent ssl3_read_internal() from incorrectly assuming that
- ssl3_read_bytes() found application data while handshake
- processing was enabled when in fact s->s3->in_read_app_data was
- merely automatically cleared during the initial handshake.
- [Bodo Moeller; problem pointed out by Arne Ansper <arne@ats.cyber.ee>]
- *) Fix object definitions for Private and Enterprise: they were not
- recognized in their shortname (=lowercase) representation. Extend
- obj_dat.pl to issue an error when using undefined keywords instead
- of silently ignoring the problem (Svenning Sorensen
- <sss@sss.dnsalias.net>).
- [Lutz Jaenicke]
- *) Fix DH_generate_parameters() so that it works for 'non-standard'
- generators, i.e. generators other than 2 and 5. (Previously, the
- code did not properly initialise the 'add' and 'rem' values to
- BN_generate_prime().)
- In the new general case, we do not insist that 'generator' is
- actually a primitive root: This requirement is rather pointless;
- a generator of the order-q subgroup is just as good, if not
- better.
- [Bodo Moeller]
-
- *) Map new X509 verification errors to alerts. Discovered and submitted by
- Tom Wu <tom@arcot.com>.
- [Lutz Jaenicke]
- *) Fix ssl3_pending() (ssl/s3_lib.c) to prevent SSL_pending() from
- returning non-zero before the data has been completely received
- when using non-blocking I/O.
- [Bodo Moeller; problem pointed out by John Hughes]
- *) Some of the ciphers missed the strength entry (SSL_LOW etc).
- [Ben Laurie, Lutz Jaenicke]
- *) Fix bug in SSL_clear(): bad sessions were not removed (found by
- Yoram Zahavi <YoramZ@gilian.com>).
- [Lutz Jaenicke]
- *) Add information about CygWin 1.3 and on, and preserve proper
- configuration for the versions before that.
- [Corinna Vinschen <vinschen@redhat.com> and Richard Levitte]
- *) Make removal from session cache (SSL_CTX_remove_session()) more robust:
- check whether we deal with a copy of a session and do not delete from
- the cache in this case. Problem reported by "Izhar Shoshani Levi"
- <izhar@checkpoint.com>.
- [Lutz Jaenicke]
- *) Do not store session data into the internal session cache, if it
- is never intended to be looked up (SSL_SESS_CACHE_NO_INTERNAL_LOOKUP
- flag is set). Proposed by Aslam <aslam@funk.com>.
- [Lutz Jaenicke]
- *) Have ASN1_BIT_STRING_set_bit() really clear a bit when the requested
- value is 0.
- [Richard Levitte]
- *) [In 0.9.6d-engine release:]
- Fix a crashbug and a logic bug in hwcrhk_load_pubkey().
- [Toomas Kiisk <vix@cyber.ee> via Richard Levitte]
- *) Add the configuration target linux-s390x.
- [Neale Ferguson <Neale.Ferguson@SoftwareAG-USA.com> via Richard Levitte]
- *) The earlier bugfix for the SSL3_ST_SW_HELLO_REQ_C case of
- ssl3_accept (ssl/s3_srvr.c) incorrectly used a local flag
- variable as an indication that a ClientHello message has been
- received. As the flag value will be lost between multiple
- invocations of ssl3_accept when using non-blocking I/O, the
- function may not be aware that a handshake has actually taken
- place, thus preventing a new session from being added to the
- session cache.
- To avoid this problem, we now set s->new_session to 2 instead of
- using a local variable.
- [Lutz Jaenicke, Bodo Moeller]
- *) Bugfix: Return -1 from ssl3_get_server_done (ssl3/s3_clnt.c)
- if the SSL_R_LENGTH_MISMATCH error is detected.
- [Geoff Thorpe, Bodo Moeller]
- *) New 'shared_ldflag' column in Configure platform table.
- [Richard Levitte]
- *) Fix EVP_CIPHER_mode macro.
- ["Dan S. Camper" <dan@bti.net>]
- *) Fix ssl3_read_bytes (ssl/s3_pkt.c): To ignore messages of unknown
- type, we must throw them away by setting rr->length to 0.
- [D P Chang <dpc@qualys.com>]
- Changes between 0.9.6b and 0.9.6c [21 dec 2001]
- *) Fix BN_rand_range bug pointed out by Dominikus Scherkl
- <Dominikus.Scherkl@biodata.com>. (The previous implementation
- worked incorrectly for those cases where range = 10..._2 and
- 3*range is two bits longer than range.)
- [Bodo Moeller]
- *) Only add signing time to PKCS7 structures if it is not already
- present.
- [Steve Henson]
- *) Fix crypto/objects/objects.h: "ld-ce" should be "id-ce",
- OBJ_ld_ce should be OBJ_id_ce.
- Also some ip-pda OIDs in crypto/objects/objects.txt were
- incorrect (cf. RFC 3039).
- [Matt Cooper, Frederic Giudicelli, Bodo Moeller]
- *) Release CRYPTO_LOCK_DYNLOCK when CRYPTO_destroy_dynlockid()
- returns early because it has nothing to do.
- [Andy Schneider <andy.schneider@bjss.co.uk>]
- *) [In 0.9.6c-engine release:]
- Fix mutex callback return values in crypto/engine/hw_ncipher.c.
- [Andy Schneider <andy.schneider@bjss.co.uk>]
- *) [In 0.9.6c-engine release:]
- Add support for Cryptographic Appliance's keyserver technology.
- (Use engine 'keyclient')
- [Cryptographic Appliances and Geoff Thorpe]
- *) Add a configuration entry for OS/390 Unix. The C compiler 'c89'
- is called via tools/c89.sh because arguments have to be
- rearranged (all '-L' options must appear before the first object
- modules).
- [Richard Shapiro <rshapiro@abinitio.com>]
- *) [In 0.9.6c-engine release:]
- Add support for Broadcom crypto accelerator cards, backported
- from 0.9.7.
- [Broadcom, Nalin Dahyabhai <nalin@redhat.com>, Mark Cox]
- *) [In 0.9.6c-engine release:]
- Add support for SureWare crypto accelerator cards from
- Baltimore Technologies. (Use engine 'sureware')
- [Baltimore Technologies and Mark Cox]
- *) [In 0.9.6c-engine release:]
- Add support for crypto accelerator cards from Accelerated
- Encryption Processing, www.aep.ie. (Use engine 'aep')
- [AEP Inc. and Mark Cox]
- *) Add a configuration entry for gcc on UnixWare.
- [Gary Benson <gbenson@redhat.com>]
- *) Change ssl/s2_clnt.c and ssl/s2_srvr.c so that received handshake
- messages are stored in a single piece (fixed-length part and
- variable-length part combined) and fix various bugs found on the way.
- [Bodo Moeller]
- *) Disable caching in BIO_gethostbyname(), directly use gethostbyname()
- instead. BIO_gethostbyname() does not know what timeouts are
- appropriate, so entries would stay in cache even when they have
- become invalid.
- [Bodo Moeller; problem pointed out by Rich Salz <rsalz@zolera.com>
- *) Change ssl23_get_client_hello (ssl/s23_srvr.c) behaviour when
- faced with a pathologically small ClientHello fragment that does
- not contain client_version: Instead of aborting with an error,
- simply choose the highest available protocol version (i.e.,
- TLS 1.0 unless it is disabled). In practice, ClientHello
- messages are never sent like this, but this change gives us
- strictly correct behaviour at least for TLS.
- [Bodo Moeller]
- *) Fix SSL handshake functions and SSL_clear() such that SSL_clear()
- never resets s->method to s->ctx->method when called from within
- one of the SSL handshake functions.
- [Bodo Moeller; problem pointed out by Niko Baric]
- *) In ssl3_get_client_hello (ssl/s3_srvr.c), generate a fatal alert
- (sent using the client's version number) if client_version is
- smaller than the protocol version in use. Also change
- ssl23_get_client_hello (ssl/s23_srvr.c) to select TLS 1.0 if
- the client demanded SSL 3.0 but only TLS 1.0 is enabled; then
- the client will at least see that alert.
- [Bodo Moeller]
- *) Fix ssl3_get_message (ssl/s3_both.c) to handle message fragmentation
- correctly.
- [Bodo Moeller]
- *) Avoid infinite loop in ssl3_get_message (ssl/s3_both.c) if a
- client receives HelloRequest while in a handshake.
- [Bodo Moeller; bug noticed by Andy Schneider <andy.schneider@bjss.co.uk>]
- *) Bugfix in ssl3_accept (ssl/s3_srvr.c): Case SSL3_ST_SW_HELLO_REQ_C
- should end in 'break', not 'goto end' which circuments various
- cleanups done in state SSL_ST_OK. But session related stuff
- must be disabled for SSL_ST_OK in the case that we just sent a
- HelloRequest.
- Also avoid some overhead by not calling ssl_init_wbio_buffer()
- before just sending a HelloRequest.
- [Bodo Moeller, Eric Rescorla <ekr@rtfm.com>]
- *) Fix ssl/s3_enc.c, ssl/t1_enc.c and ssl/s3_pkt.c so that we don't
- reveal whether illegal block cipher padding was found or a MAC
- verification error occured. (Neither SSLerr() codes nor alerts
- are directly visible to potential attackers, but the information
- may leak via logfiles.)
- Similar changes are not required for the SSL 2.0 implementation
- because the number of padding bytes is sent in clear for SSL 2.0,
- and the extra bytes are just ignored. However ssl/s2_pkt.c
- failed to verify that the purported number of padding bytes is in
- the legal range.
- [Bodo Moeller]
- *) Add OpenUNIX-8 support including shared libraries
- (Boyd Lynn Gerber <gerberb@zenez.com>).
- [Lutz Jaenicke]
- *) Improve RSA_padding_check_PKCS1_OAEP() check again to avoid
- 'wristwatch attack' using huge encoding parameters (cf.
- James H. Manger's CRYPTO 2001 paper). Note that the
- RSA_PKCS1_OAEP_PADDING case of RSA_private_decrypt() does not use
- encoding parameters and hence was not vulnerable.
- [Bodo Moeller]
- *) BN_sqr() bug fix.
- [Ulf Möller, reported by Jim Ellis <jim.ellis@cavium.com>]
- *) Rabin-Miller test analyses assume uniformly distributed witnesses,
- so use BN_pseudo_rand_range() instead of using BN_pseudo_rand()
- followed by modular reduction.
- [Bodo Moeller; pointed out by Adam Young <AYoung1@NCSUS.JNJ.COM>]
- *) Add BN_pseudo_rand_range() with obvious functionality: BN_rand_range()
- equivalent based on BN_pseudo_rand() instead of BN_rand().
- [Bodo Moeller]
- *) s3_srvr.c: allow sending of large client certificate lists (> 16 kB).
- This function was broken, as the check for a new client hello message
- to handle SGC did not allow these large messages.
- (Tracked down by "Douglas E. Engert" <deengert@anl.gov>.)
- [Lutz Jaenicke]
- *) Add alert descriptions for TLSv1 to SSL_alert_desc_string[_long]().
- [Lutz Jaenicke]
- *) Fix buggy behaviour of BIO_get_num_renegotiates() and BIO_ctrl()
- for BIO_C_GET_WRITE_BUF_SIZE ("Stephen Hinton" <shinton@netopia.com>).
- [Lutz Jaenicke]
- *) Rework the configuration and shared library support for Tru64 Unix.
- The configuration part makes use of modern compiler features and
- still retains old compiler behavior for those that run older versions
- of the OS. The shared library support part includes a variant that
- uses the RPATH feature, and is available through the special
- configuration target "alpha-cc-rpath", which will never be selected
- automatically.
- [Tim Mooney <mooney@dogbert.cc.ndsu.NoDak.edu> via Richard Levitte]
- *) In ssl3_get_key_exchange (ssl/s3_clnt.c), call ssl3_get_message()
- with the same message size as in ssl3_get_certificate_request().
- Otherwise, if no ServerKeyExchange message occurs, CertificateRequest
- messages might inadvertently be reject as too long.
- [Petr Lampa <lampa@fee.vutbr.cz>]
- *) Enhanced support for IA-64 Unix platforms (well, Linux and HP-UX).
- [Andy Polyakov]
- *) Modified SSL library such that the verify_callback that has been set
- specificly for an SSL object with SSL_set_verify() is actually being
- used. Before the change, a verify_callback set with this function was
- ignored and the verify_callback() set in the SSL_CTX at the time of
- the call was used. New function X509_STORE_CTX_set_verify_cb() introduced
- to allow the necessary settings.
- [Lutz Jaenicke]
- *) Initialize static variable in crypto/dsa/dsa_lib.c and crypto/dh/dh_lib.c
- explicitly to NULL, as at least on Solaris 8 this seems not always to be
- done automatically (in contradiction to the requirements of the C
- standard). This made problems when used from OpenSSH.
- [Lutz Jaenicke]
- *) In OpenSSL 0.9.6a and 0.9.6b, crypto/dh/dh_key.c ignored
- dh->length and always used
- BN_rand_range(priv_key, dh->p).
- BN_rand_range() is not necessary for Diffie-Hellman, and this
- specific range makes Diffie-Hellman unnecessarily inefficient if
- dh->length (recommended exponent length) is much smaller than the
- length of dh->p. We could use BN_rand_range() if the order of
- the subgroup was stored in the DH structure, but we only have
- dh->length.
- So switch back to
- BN_rand(priv_key, l, ...)
- where 'l' is dh->length if this is defined, or BN_num_bits(dh->p)-1
- otherwise.
- [Bodo Moeller]
- *) In
- RSA_eay_public_encrypt
- RSA_eay_private_decrypt
- RSA_eay_private_encrypt (signing)
- RSA_eay_public_decrypt (signature verification)
- (default implementations for RSA_public_encrypt,
- RSA_private_decrypt, RSA_private_encrypt, RSA_public_decrypt),
- always reject numbers >= n.
- [Bodo Moeller]
- *) In crypto/rand/md_rand.c, use a new short-time lock CRYPTO_LOCK_RAND2
- to synchronize access to 'locking_thread'. This is necessary on
- systems where access to 'locking_thread' (an 'unsigned long'
- variable) is not atomic.
- [Bodo Moeller]
- *) In crypto/rand/md_rand.c, set 'locking_thread' to current thread's ID
- *before* setting the 'crypto_lock_rand' flag. The previous code had
- a race condition if 0 is a valid thread ID.
- [Travis Vitek <vitek@roguewave.com>]
- *) Add support for shared libraries under Irix.
- [Albert Chin-A-Young <china@thewrittenword.com>]
- *) Add configuration option to build on Linux on both big-endian and
- little-endian MIPS.
- [Ralf Baechle <ralf@uni-koblenz.de>]
- *) Add the possibility to create shared libraries on HP-UX.
- [Richard Levitte]
- Changes between 0.9.6a and 0.9.6b [9 Jul 2001]
- *) Change ssleay_rand_bytes (crypto/rand/md_rand.c)
- to avoid a SSLeay/OpenSSL PRNG weakness pointed out by
- Markku-Juhani O. Saarinen <markku-juhani.saarinen@nokia.com>:
- PRNG state recovery was possible based on the output of
- one PRNG request appropriately sized to gain knowledge on
- 'md' followed by enough consecutive 1-byte PRNG requests
- to traverse all of 'state'.
- 1. When updating 'md_local' (the current thread's copy of 'md')
- during PRNG output generation, hash all of the previous
- 'md_local' value, not just the half used for PRNG output.
- 2. Make the number of bytes from 'state' included into the hash
- independent from the number of PRNG bytes requested.
- The first measure alone would be sufficient to avoid
- Markku-Juhani's attack. (Actually it had never occurred
- to me that the half of 'md_local' used for chaining was the
- half from which PRNG output bytes were taken -- I had always
- assumed that the secret half would be used.) The second
- measure makes sure that additional data from 'state' is never
- mixed into 'md_local' in small portions; this heuristically
- further strengthens the PRNG.
- [Bodo Moeller]
- *) Fix crypto/bn/asm/mips3.s.
- [Andy Polyakov]
- *) When only the key is given to "enc", the IV is undefined. Print out
- an error message in this case.
- [Lutz Jaenicke]
- *) Handle special case when X509_NAME is empty in X509 printing routines.
- [Steve Henson]
- *) In dsa_do_verify (crypto/dsa/dsa_ossl.c), verify that r and s are
- positive and less than q.
- [Bodo Moeller]
- *) Don't change *pointer in CRYPTO_add_lock() is add_lock_callback is
- used: it isn't thread safe and the add_lock_callback should handle
- that itself.
- [Paul Rose <Paul.Rose@bridge.com>]
- *) Verify that incoming data obeys the block size in
- ssl3_enc (ssl/s3_enc.c) and tls1_enc (ssl/t1_enc.c).
- [Bodo Moeller]
- *) Fix OAEP check.
- [Ulf Möller, Bodo Möller]
- *) The countermeasure against Bleichbacher's attack on PKCS #1 v1.5
- RSA encryption was accidentally removed in s3_srvr.c in OpenSSL 0.9.5
- when fixing the server behaviour for backwards-compatible 'client
- hello' messages. (Note that the attack is impractical against
- SSL 3.0 and TLS 1.0 anyway because length and version checking
- means that the probability of guessing a valid ciphertext is
- around 2^-40; see section 5 in Bleichenbacher's CRYPTO '98
- paper.)
- Before 0.9.5, the countermeasure (hide the error by generating a
- random 'decryption result') did not work properly because
- ERR_clear_error() was missing, meaning that SSL_get_error() would
- detect the supposedly ignored error.
- Both problems are now fixed.
- [Bodo Moeller]
- *) In crypto/bio/bf_buff.c, increase DEFAULT_BUFFER_SIZE to 4096
- (previously it was 1024).
- [Bodo Moeller]
- *) Fix for compatibility mode trust settings: ignore trust settings
- unless some valid trust or reject settings are present.
- [Steve Henson]
- *) Fix for blowfish EVP: its a variable length cipher.
- [Steve Henson]
- *) Fix various bugs related to DSA S/MIME verification. Handle missing
- parameters in DSA public key structures and return an error in the
- DSA routines if parameters are absent.
- [Steve Henson]
- *) In versions up to 0.9.6, RAND_file_name() resorted to file ".rnd"
- in the current directory if neither $RANDFILE nor $HOME was set.
- RAND_file_name() in 0.9.6a returned NULL in this case. This has
- caused some confusion to Windows users who haven't defined $HOME.
- Thus RAND_file_name() is changed again: e_os.h can define a
- DEFAULT_HOME, which will be used if $HOME is not set.
- For Windows, we use "C:"; on other platforms, we still require
- environment variables.
- *) Move 'if (!initialized) RAND_poll()' into regions protected by
- CRYPTO_LOCK_RAND. This is not strictly necessary, but avoids
- having multiple threads call RAND_poll() concurrently.
- [Bodo Moeller]
- *) In crypto/rand/md_rand.c, replace 'add_do_not_lock' flag by a
- combination of a flag and a thread ID variable.
- Otherwise while one thread is in ssleay_rand_bytes (which sets the
- flag), *other* threads can enter ssleay_add_bytes without obeying
- the CRYPTO_LOCK_RAND lock (and may even illegally release the lock
- that they do not hold after the first thread unsets add_do_not_lock).
- [Bodo Moeller]
- *) Change bctest again: '-x' expressions are not available in all
- versions of 'test'.
- [Bodo Moeller]
- Changes between 0.9.6 and 0.9.6a [5 Apr 2001]
- *) Fix a couple of memory leaks in PKCS7_dataDecode()
- [Steve Henson, reported by Heyun Zheng <hzheng@atdsprint.com>]
- *) Change Configure and Makefiles to provide EXE_EXT, which will contain
- the default extension for executables, if any. Also, make the perl
- scripts that use symlink() to test if it really exists and use "cp"
- if it doesn't. All this made OpenSSL compilable and installable in
- CygWin.
- [Richard Levitte]
- *) Fix for asn1_GetSequence() for indefinite length constructed data.
- If SEQUENCE is length is indefinite just set c->slen to the total
- amount of data available.
- [Steve Henson, reported by shige@FreeBSD.org]
- [This change does not apply to 0.9.7.]
- *) Change bctest to avoid here-documents inside command substitution
- (workaround for FreeBSD /bin/sh bug).
- For compatibility with Ultrix, avoid shell functions (introduced
- in the bctest version that searches along $PATH).
- [Bodo Moeller]
- *) Rename 'des_encrypt' to 'des_encrypt1'. This avoids the clashes
- with des_encrypt() defined on some operating systems, like Solaris
- and UnixWare.
- [Richard Levitte]
- *) Check the result of RSA-CRT (see D. Boneh, R. DeMillo, R. Lipton:
- On the Importance of Eliminating Errors in Cryptographic
- Computations, J. Cryptology 14 (2001) 2, 101-119,
- http://theory.stanford.edu/~dabo/papers/faults.ps.gz).
- [Ulf Moeller]
-
- *) MIPS assembler BIGNUM division bug fix.
- [Andy Polyakov]
- *) Disabled incorrect Alpha assembler code.
- [Richard Levitte]
- *) Fix PKCS#7 decode routines so they correctly update the length
- after reading an EOC for the EXPLICIT tag.
- [Steve Henson]
- [This change does not apply to 0.9.7.]
- *) Fix bug in PKCS#12 key generation routines. This was triggered
- if a 3DES key was generated with a 0 initial byte. Include
- PKCS12_BROKEN_KEYGEN compilation option to retain the old
- (but broken) behaviour.
- [Steve Henson]
- *) Enhance bctest to search for a working bc along $PATH and print
- it when found.
- [Tim Rice <tim@multitalents.net> via Richard Levitte]
- *) Fix memory leaks in err.c: free err_data string if necessary;
- don't write to the wrong index in ERR_set_error_data.
- [Bodo Moeller]
- *) Implement ssl23_peek (analogous to ssl23_read), which previously
- did not exist.
- [Bodo Moeller]
- *) Replace rdtsc with _emit statements for VC++ version 5.
- [Jeremy Cooper <jeremy@baymoo.org>]
- *) Make it possible to reuse SSLv2 sessions.
- [Richard Levitte]
- *) In copy_email() check for >= 0 as a return value for
- X509_NAME_get_index_by_NID() since 0 is a valid index.
- [Steve Henson reported by Massimiliano Pala <madwolf@opensca.org>]
- *) Avoid coredump with unsupported or invalid public keys by checking if
- X509_get_pubkey() fails in PKCS7_verify(). Fix memory leak when
- PKCS7_verify() fails with non detached data.
- [Steve Henson]
- *) Don't use getenv in library functions when run as setuid/setgid.
- New function OPENSSL_issetugid().
- [Ulf Moeller]
- *) Avoid false positives in memory leak detection code (crypto/mem_dbg.c)
- due to incorrect handling of multi-threading:
- 1. Fix timing glitch in the MemCheck_off() portion of CRYPTO_mem_ctrl().
- 2. Fix logical glitch in is_MemCheck_on() aka CRYPTO_is_mem_check_on().
- 3. Count how many times MemCheck_off() has been called so that
- nested use can be treated correctly. This also avoids
- inband-signalling in the previous code (which relied on the
- assumption that thread ID 0 is impossible).
- [Bodo Moeller]
- *) Add "-rand" option also to s_client and s_server.
- [Lutz Jaenicke]
- *) Fix CPU detection on Irix 6.x.
- [Kurt Hockenbury <khockenb@stevens-tech.edu> and
- "Bruce W. Forsberg" <bruce.forsberg@baesystems.com>]
- *) Fix X509_NAME bug which produced incorrect encoding if X509_NAME
- was empty.
- [Steve Henson]
- [This change does not apply to 0.9.7.]
- *) Use the cached encoding of an X509_NAME structure rather than
- copying it. This is apparently the reason for the libsafe "errors"
- but the code is actually correct.
- [Steve Henson]
- *) Add new function BN_rand_range(), and fix DSA_sign_setup() to prevent
- Bleichenbacher's DSA attack.
- Extend BN_[pseudo_]rand: As before, top=1 forces the highest two bits
- to be set and top=0 forces the highest bit to be set; top=-1 is new
- and leaves the highest bit random.
- [Ulf Moeller, Bodo Moeller]
- *) In the NCONF_...-based implementations for CONF_... queries
- (crypto/conf/conf_lib.c), if the input LHASH is NULL, avoid using
- a temporary CONF structure with the data component set to NULL
- (which gives segmentation faults in lh_retrieve).
- Instead, use NULL for the CONF pointer in CONF_get_string and
- CONF_get_number (which may use environment variables) and directly
- return NULL from CONF_get_section.
- [Bodo Moeller]
- *) Fix potential buffer overrun for EBCDIC.
- [Ulf Moeller]
- *) Tolerate nonRepudiation as being valid for S/MIME signing and certSign
- keyUsage if basicConstraints absent for a CA.
- [Steve Henson]
- *) Make SMIME_write_PKCS7() write mail header values with a format that
- is more generally accepted (no spaces before the semicolon), since
- some programs can't parse those values properly otherwise. Also make
- sure BIO's that break lines after each write do not create invalid
- headers.
- [Richard Levitte]
- *) Make the CRL encoding routines work with empty SEQUENCE OF. The
- macros previously used would not encode an empty SEQUENCE OF
- and break the signature.
- [Steve Henson]
- [This change does not apply to 0.9.7.]
- *) Zero the premaster secret after deriving the master secret in
- DH ciphersuites.
- [Steve Henson]
- *) Add some EVP_add_digest_alias registrations (as found in
- OpenSSL_add_all_digests()) to SSL_library_init()
- aka OpenSSL_add_ssl_algorithms(). This provides improved
- compatibility with peers using X.509 certificates
- with unconventional AlgorithmIdentifier OIDs.
- [Bodo Moeller]
- *) Fix for Irix with NO_ASM.
- ["Bruce W. Forsberg" <bruce.forsberg@baesystems.com>]
- *) ./config script fixes.
- [Ulf Moeller, Richard Levitte]
- *) Fix 'openssl passwd -1'.
- [Bodo Moeller]
- *) Change PKCS12_key_gen_asc() so it can cope with non null
- terminated strings whose length is passed in the passlen
- parameter, for example from PEM callbacks. This was done
- by adding an extra length parameter to asc2uni().
- [Steve Henson, reported by <oddissey@samsung.co.kr>]
- *) Fix C code generated by 'openssl dsaparam -C': If a BN_bin2bn
- call failed, free the DSA structure.
- [Bodo Moeller]
- *) Fix to uni2asc() to cope with zero length Unicode strings.
- These are present in some PKCS#12 files.
- [Steve Henson]
- *) Increase s2->wbuf allocation by one byte in ssl2_new (ssl/s2_lib.c).
- Otherwise do_ssl_write (ssl/s2_pkt.c) will write beyond buffer limits
- when writing a 32767 byte record.
- [Bodo Moeller; problem reported by Eric Day <eday@concentric.net>]
- *) In RSA_eay_public_{en,ed}crypt and RSA_eay_mod_exp (rsa_eay.c),
- obtain lock CRYPTO_LOCK_RSA before setting rsa->_method_mod_{n,p,q}.
- (RSA objects have a reference count access to which is protected
- by CRYPTO_LOCK_RSA [see rsa_lib.c, s3_srvr.c, ssl_cert.c, ssl_rsa.c],
- so they are meant to be shared between threads.)
- [Bodo Moeller, Geoff Thorpe; original patch submitted by
- "Reddie, Steven" <Steven.Reddie@ca.com>]
- *) Fix a deadlock in CRYPTO_mem_leaks().
- [Bodo Moeller]
- *) Use better test patterns in bntest.
- [Ulf Möller]
- *) rand_win.c fix for Borland C.
- [Ulf Möller]
-
- *) BN_rshift bugfix for n == 0.
- [Bodo Moeller]
- *) Add a 'bctest' script that checks for some known 'bc' bugs
- so that 'make test' does not abort just because 'bc' is broken.
- [Bodo Moeller]
- *) Store verify_result within SSL_SESSION also for client side to
- avoid potential security hole. (Re-used sessions on the client side
- always resulted in verify_result==X509_V_OK, not using the original
- result of the server certificate verification.)
- [Lutz Jaenicke]
- *) Fix ssl3_pending: If the record in s->s3->rrec is not of type
- SSL3_RT_APPLICATION_DATA, return 0.
- Similarly, change ssl2_pending to return 0 if SSL_in_init(s) is true.
- [Bodo Moeller]
- *) Fix SSL_peek:
- Both ssl2_peek and ssl3_peek, which were totally broken in earlier
- releases, have been re-implemented by renaming the previous
- implementations of ssl2_read and ssl3_read to ssl2_read_internal
- and ssl3_read_internal, respectively, and adding 'peek' parameters
- to them. The new ssl[23]_{read,peek} functions are calls to
- ssl[23]_read_internal with the 'peek' flag set appropriately.
- A 'peek' parameter has also been added to ssl3_read_bytes, which
- does the actual work for ssl3_read_internal.
- [Bodo Moeller]
- *) Initialise "ex_data" member of RSA/DSA/DH structures prior to calling
- the method-specific "init()" handler. Also clean up ex_data after
- calling the method-specific "finish()" handler. Previously, this was
- happening the other way round.
- [Geoff Thorpe]
- *) Increase BN_CTX_NUM (the number of BIGNUMs in a BN_CTX) to 16.
- The previous value, 12, was not always sufficient for BN_mod_exp().
- [Bodo Moeller]
- *) Make sure that shared libraries get the internal name engine with
- the full version number and not just 0. This should mark the
- shared libraries as not backward compatible. Of course, this should
- be changed again when we can guarantee backward binary compatibility.
- [Richard Levitte]
- *) Fix typo in get_cert_by_subject() in by_dir.c
- [Jean-Marc Desperrier <jean-marc.desperrier@certplus.com>]
- *) Rework the system to generate shared libraries:
- - Make note of the expected extension for the shared libraries and
- if there is a need for symbolic links from for example libcrypto.so.0
- to libcrypto.so.0.9.7. There is extended info in Configure for
- that.
- - Make as few rebuilds of the shared libraries as possible.
- - Still avoid linking the OpenSSL programs with the shared libraries.
- - When installing, install the shared libraries separately from the
- static ones.
- [Richard Levitte]
- *) Fix SSL_CTX_set_read_ahead macro to actually use its argument.
- Copy SSL_CTX's read_ahead flag to SSL object directly in SSL_new
- and not in SSL_clear because the latter is also used by the
- accept/connect functions; previously, the settings made by
- SSL_set_read_ahead would be lost during the handshake.
- [Bodo Moeller; problems reported by Anders Gertz <gertz@epact.se>]
- *) Correct util/mkdef.pl to be selective about disabled algorithms.
- Previously, it would create entries for disableed algorithms no
- matter what.
- [Richard Levitte]
- *) Added several new manual pages for SSL_* function.
- [Lutz Jaenicke]
- Changes between 0.9.5a and 0.9.6 [24 Sep 2000]
- *) In ssl23_get_client_hello, generate an error message when faced
- with an initial SSL 3.0/TLS record that is too small to contain the
- first two bytes of the ClientHello message, i.e. client_version.
- (Note that this is a pathologic case that probably has never happened
- in real life.) The previous approach was to use the version number
- from the record header as a substitute; but our protocol choice
- should not depend on that one because it is not authenticated
- by the Finished messages.
- [Bodo Moeller]
- *) More robust randomness gathering functions for Windows.
- [Jeffrey Altman <jaltman@columbia.edu>]
- *) For compatibility reasons if the flag X509_V_FLAG_ISSUER_CHECK is
- not set then we don't setup the error code for issuer check errors
- to avoid possibly overwriting other errors which the callback does
- handle. If an application does set the flag then we assume it knows
- what it is doing and can handle the new informational codes
- appropriately.
- [Steve Henson]
- *) Fix for a nasty bug in ASN1_TYPE handling. ASN1_TYPE is used for
- a general "ANY" type, as such it should be able to decode anything
- including tagged types. However it didn't check the class so it would
- wrongly interpret tagged types in the same way as their universal
- counterpart and unknown types were just rejected. Changed so that the
- tagged and unknown types are handled in the same way as a SEQUENCE:
- that is the encoding is stored intact. There is also a new type
- "V_ASN1_OTHER" which is used when the class is not universal, in this
- case we have no idea what the actual type is so we just lump them all
- together.
- [Steve Henson]
- *) On VMS, stdout may very well lead to a file that is written to
- in a record-oriented fashion. That means that every write() will
- write a separate record, which will be read separately by the
- programs trying to read from it. This can be very confusing.
- The solution is to put a BIO filter in the way that will buffer
- text until a linefeed is reached, and then write everything a
- line at a time, so every record written will be an actual line,
- not chunks of lines and not (usually doesn't happen, but I've
- seen it once) several lines in one record. BIO_f_linebuffer() is
- the answer.
- Currently, it's a VMS-only method, because that's where it has
- been tested well enough.
- [Richard Levitte]
- *) Remove 'optimized' squaring variant in BN_mod_mul_montgomery,
- it can return incorrect results.
- (Note: The buggy variant was not enabled in OpenSSL 0.9.5a,
- but it was in 0.9.6-beta[12].)
- [Bodo Moeller]
- *) Disable the check for content being present when verifying detached
- signatures in pk7_smime.c. Some versions of Netscape (wrongly)
- include zero length content when signing messages.
- [Steve Henson]
- *) New BIO_shutdown_wr macro, which invokes the BIO_C_SHUTDOWN_WR
- BIO_ctrl (for BIO pairs).
- [Bodo Möller]
- *) Add DSO method for VMS.
- [Richard Levitte]
- *) Bug fix: Montgomery multiplication could produce results with the
- wrong sign.
- [Ulf Möller]
- *) Add RPM specification openssl.spec and modify it to build three
- packages. The default package contains applications, application
- documentation and run-time libraries. The devel package contains
- include files, static libraries and function documentation. The
- doc package contains the contents of the doc directory. The original
- openssl.spec was provided by Damien Miller <djm@mindrot.org>.
- [Richard Levitte]
-
- *) Add a large number of documentation files for many SSL routines.
- [Lutz Jaenicke <Lutz.Jaenicke@aet.TU-Cottbus.DE>]
- *) Add a configuration entry for Sony News 4.
- [NAKAJI Hiroyuki <nakaji@tutrp.tut.ac.jp>]
- *) Don't set the two most significant bits to one when generating a
- random number < q in the DSA library.
- [Ulf Möller]
- *) New SSL API mode 'SSL_MODE_AUTO_RETRY'. This disables the default
- behaviour that SSL_read may result in SSL_ERROR_WANT_READ (even if
- the underlying transport is blocking) if a handshake took place.
- (The default behaviour is needed by applications such as s_client
- and s_server that use select() to determine when to use SSL_read;
- but for applications that know in advance when to expect data, it
- just makes things more complicated.)
- [Bodo Moeller]
- *) Add RAND_egd_bytes(), which gives control over the number of bytes read
- from EGD.
- [Ben Laurie]
- *) Add a few more EBCDIC conditionals that make `req' and `x509'
- work better on such systems.
- [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
- *) Add two demo programs for PKCS12_parse() and PKCS12_create().
- Update PKCS12_parse() so it copies the friendlyName and the
- keyid to the certificates aux info.
- [Steve Henson]
- *) Fix bug in PKCS7_verify() which caused an infinite loop
- if there was more than one signature.
- [Sven Uszpelkat <su@celocom.de>]
- *) Major change in util/mkdef.pl to include extra information
- about each symbol, as well as presentig variables as well
- as functions. This change means that there's n more need
- to rebuild the .num files when some algorithms are excluded.
- [Richard Levitte]
- *) Allow the verify time to be set by an application,
- rather than always using the current time.
- [Steve Henson]
-
- *) Phase 2 verify code reorganisation. The certificate
- verify code now looks up an issuer certificate by a
- number of criteria: subject name, authority key id
- and key usage. It also verifies self signed certificates
- by the same criteria. The main comparison function is
- X509_check_issued() which performs these checks.
-
- Lot of changes were necessary in order to support this
- without completely rewriting the lookup code.
-
- Authority and subject key identifier are now cached.
-
- The LHASH 'certs' is X509_STORE has now been replaced
- by a STACK_OF(X509_OBJECT). This is mainly because an
- LHASH can't store or retrieve multiple objects with
- the same hash value.
- As a result various functions (which were all internal
- use only) have changed to handle the new X509_STORE
- structure. This will break anything that messed round
- with X509_STORE internally.
-
- The functions X509_STORE_add_cert() now checks for an
- exact match, rather than just subject name.
-
- The X509_STORE API doesn't directly support the retrieval
- of multiple certificates matching a given criteria, however
- this can be worked round by performing a lookup first
- (which will fill the cache with candidate certificates)
- and then examining the cache for matches. This is probably
- the best we can do without throwing out X509_LOOKUP
- entirely (maybe later...).
-
- The X509_VERIFY_CTX structure has been enhanced considerably.
-
- All certificate lookup operations now go via a get_issuer()
- callback. Although this currently uses an X509_STORE it
- can be replaced by custom lookups. This is a simple way
- to bypass the X509_STORE hackery necessary to make this
- work and makes it possible to use more efficient techniques
- in future. A very simple version which uses a simple
- STACK for its trusted certificate store is also provided
- using X509_STORE_CTX_trusted_stack().
-
- The verify_cb() and verify() callbacks now have equivalents
- in the X509_STORE_CTX structure.
-
- X509_STORE_CTX also has a 'flags' field which can be used
- to customise the verify behaviour.
- [Steve Henson]
-
- *) Add new PKCS#7 signing option PKCS7_NOSMIMECAP which
- excludes S/MIME capabilities.
- [Steve Henson]
- *) When a certificate request is read in keep a copy of the
- original encoding of the signed data and use it when outputing
- again. Signatures then use the original encoding rather than
- a decoded, encoded version which may cause problems if the
- request is improperly encoded.
- [Steve Henson]
- *) For consistency with other BIO_puts implementations, call
- buffer_write(b, ...) directly in buffer_puts instead of calling
- BIO_write(b, ...).
- In BIO_puts, increment b->num_write as in BIO_write.
- [Peter.Sylvester@EdelWeb.fr]
- *) Fix BN_mul_word for the case where the word is 0. (We have to use
- BN_zero, we may not return a BIGNUM with an array consisting of
- words set to zero.)
- [Bodo Moeller]
- *) Avoid calling abort() from within the library when problems are
- detected, except if preprocessor symbols have been defined
- (such as REF_CHECK, BN_DEBUG etc.).
- [Bodo Moeller]
- *) New openssl application 'rsautl'. This utility can be
- used for low level RSA operations. DER public key
- BIO/fp routines also added.
- [Steve Henson]
- *) New Configure entry and patches for compiling on QNX 4.
- [Andreas Schneider <andreas@ds3.etech.fh-hamburg.de>]
- *) A demo state-machine implementation was sponsored by
- Nuron (http://www.nuron.com/) and is now available in
- demos/state_machine.
- [Ben Laurie]
- *) New options added to the 'dgst' utility for signature
- generation and verification.
- [Steve Henson]
- *) Unrecognized PKCS#7 content types are now handled via a
- catch all ASN1_TYPE structure. This allows unsupported
- types to be stored as a "blob" and an application can
- encode and decode it manually.
- [Steve Henson]
- *) Fix various signed/unsigned issues to make a_strex.c
- compile under VC++.
- [Oscar Jacobsson <oscar.jacobsson@celocom.com>]
- *) ASN1 fixes. i2d_ASN1_OBJECT was not returning the correct
- length if passed a buffer. ASN1_INTEGER_to_BN failed
- if passed a NULL BN and its argument was negative.
- [Steve Henson, pointed out by Sven Heiberg <sven@tartu.cyber.ee>]
- *) Modification to PKCS#7 encoding routines to output definite
- length encoding. Since currently the whole structures are in
- memory there's not real point in using indefinite length
- constructed encoding. However if OpenSSL is compiled with
- the flag PKCS7_INDEFINITE_ENCODING the old form is used.
- [Steve Henson]
- *) Added BIO_vprintf() and BIO_vsnprintf().
- [Richard Levitte]
- *) Added more prefixes to parse for in the the strings written
- through a logging bio, to cover all the levels that are available
- through syslog. The prefixes are now:
- PANIC, EMERG, EMR => LOG_EMERG
- ALERT, ALR => LOG_ALERT
- CRIT, CRI => LOG_CRIT
- ERROR, ERR => LOG_ERR
- WARNING, WARN, WAR => LOG_WARNING
- NOTICE, NOTE, NOT => LOG_NOTICE
- INFO, INF => LOG_INFO
- DEBUG, DBG => LOG_DEBUG
- and as before, if none of those prefixes are present at the
- beginning of the string, LOG_ERR is chosen.
- On Win32, the LOG_* levels are mapped according to this:
- LOG_EMERG, LOG_ALERT, LOG_CRIT, LOG_ERR => EVENTLOG_ERROR_TYPE
- LOG_WARNING => EVENTLOG_WARNING_TYPE
- LOG_NOTICE, LOG_INFO, LOG_DEBUG => EVENTLOG_INFORMATION_TYPE
- [Richard Levitte]
- *) Made it possible to reconfigure with just the configuration
- argument "reconf" or "reconfigure". The command line arguments
- are stored in Makefile.ssl in the variable CONFIGURE_ARGS,
- and are retrieved from there when reconfiguring.
- [Richard Levitte]
- *) MD4 implemented.
- [Assar Westerlund <assar@sics.se>, Richard Levitte]
- *) Add the arguments -CAfile and -CApath to the pkcs12 utility.
- [Richard Levitte]
- *) The obj_dat.pl script was messing up the sorting of object
- names. The reason was that it compared the quoted version
- of strings as a result "OCSP" > "OCSP Signing" because
- " > SPACE. Changed script to store unquoted versions of
- names and add quotes on output. It was also omitting some
- names from the lookup table if they were given a default
- value (that is if SN is missing it is given the same
- value as LN and vice versa), these are now added on the
- grounds that if an object has a name we should be able to
- look it up. Finally added warning output when duplicate
- short or long names are found.
- [Steve Henson]
- *) Changes needed for Tandem NSK.
- [Scott Uroff <scott@xypro.com>]
- *) Fix SSL 2.0 rollback checking: Due to an off-by-one error in
- RSA_padding_check_SSLv23(), special padding was never detected
- and thus the SSL 3.0/TLS 1.0 countermeasure against protocol
- version rollback attacks was not effective.
- In s23_clnt.c, don't use special rollback-attack detection padding
- (RSA_SSLV23_PADDING) if SSL 2.0 is the only protocol enabled in the
- client; similarly, in s23_srvr.c, don't do the rollback check if
- SSL 2.0 is the only protocol enabled in the server.
- [Bodo Moeller]
- *) Make it possible to get hexdumps of unprintable data with 'openssl
- asn1parse'. By implication, the functions ASN1_parse_dump() and
- BIO_dump_indent() are added.
- [Richard Levitte]
- *) New functions ASN1_STRING_print_ex() and X509_NAME_print_ex()
- these print out strings and name structures based on various
- flags including RFC2253 support and proper handling of
- multibyte characters. Added options to the 'x509' utility
- to allow the various flags to be set.
- [Steve Henson]
- *) Various fixes to use ASN1_TIME instead of ASN1_UTCTIME.
- Also change the functions X509_cmp_current_time() and
- X509_gmtime_adj() work with an ASN1_TIME structure,
- this will enable certificates using GeneralizedTime in validity
- dates to be checked.
- [Steve Henson]
- *) Make the NEG_PUBKEY_BUG code (which tolerates invalid
- negative public key encodings) on by default,
- NO_NEG_PUBKEY_BUG can be set to disable it.
- [Steve Henson]
- *) New function c2i_ASN1_OBJECT() which acts on ASN1_OBJECT
- content octets. An i2c_ASN1_OBJECT is unnecessary because
- the encoding can be trivially obtained from the structure.
- [Steve Henson]
- *) crypto/err.c locking bugfix: Use write locks (CRYPTO_w_[un]lock),
- not read locks (CRYPTO_r_[un]lock).
- [Bodo Moeller]
- *) A first attempt at creating official support for shared
- libraries through configuration. I've kept it so the
- default is static libraries only, and the OpenSSL programs
- are always statically linked for now, but there are
- preparations for dynamic linking in place.
- This has been tested on Linux and Tru64.
- [Richard Levitte]
- *) Randomness polling function for Win9x, as described in:
- Peter Gutmann, Software Generation of Practically Strong
- Random Numbers.
- [Ulf Möller]
- *) Fix so PRNG is seeded in req if using an already existing
- DSA key.
- [Steve Henson]
- *) New options to smime application. -inform and -outform
- allow alternative formats for the S/MIME message including
- PEM and DER. The -content option allows the content to be
- specified separately. This should allow things like Netscape
- form signing output easier to verify.
- [Steve Henson]
- *) Fix the ASN1 encoding of tags using the 'long form'.
- [Steve Henson]
- *) New ASN1 functions, i2c_* and c2i_* for INTEGER and BIT
- STRING types. These convert content octets to and from the
- underlying type. The actual tag and length octets are
- already assumed to have been read in and checked. These
- are needed because all other string types have virtually
- identical handling apart from the tag. By having versions
- of the ASN1 functions that just operate on content octets
- IMPLICIT tagging can be handled properly. It also allows
- the ASN1_ENUMERATED code to be cut down because ASN1_ENUMERATED
- and ASN1_INTEGER are identical apart from the tag.
- [Steve Henson]
- *) Change the handling of OID objects as follows:
- - New object identifiers are inserted in objects.txt, following
- the syntax given in objects.README.
- - objects.pl is used to process obj_mac.num and create a new
- obj_mac.h.
- - obj_dat.pl is used to create a new obj_dat.h, using the data in
- obj_mac.h.
- This is currently kind of a hack, and the perl code in objects.pl
- isn't very elegant, but it works as I intended. The simplest way
- to check that it worked correctly is to look in obj_dat.h and
- check the array nid_objs and make sure the objects haven't moved
- around (this is important!). Additions are OK, as well as
- consistent name changes.
- [Richard Levitte]
- *) Add BSD-style MD5-based passwords to 'openssl passwd' (option '-1').
- [Bodo Moeller]
- *) Addition of the command line parameter '-rand file' to 'openssl req'.
- The given file adds to whatever has already been seeded into the
- random pool through the RANDFILE configuration file option or
- environment variable, or the default random state file.
- [Richard Levitte]
- *) mkstack.pl now sorts each macro group into lexical order.
- Previously the output order depended on the order the files
- appeared in the directory, resulting in needless rewriting
- of safestack.h .
- [Steve Henson]
- *) Patches to make OpenSSL compile under Win32 again. Mostly
- work arounds for the VC++ problem that it treats func() as
- func(void). Also stripped out the parts of mkdef.pl that
- added extra typesafe functions: these no longer exist.
- [Steve Henson]
- *) Reorganisation of the stack code. The macros are now all
- collected in safestack.h . Each macro is defined in terms of
- a "stack macro" of the form SKM_<name>(type, a, b). The
- DEBUG_SAFESTACK is now handled in terms of function casts,
- this has the advantage of retaining type safety without the
- use of additional functions. If DEBUG_SAFESTACK is not defined
- then the non typesafe macros are used instead. Also modified the
- mkstack.pl script to handle the new form. Needs testing to see
- if which (if any) compilers it chokes and maybe make DEBUG_SAFESTACK
- the default if no major problems. Similar behaviour for ASN1_SET_OF
- and PKCS12_STACK_OF.
- [Steve Henson]
- *) When some versions of IIS use the 'NET' form of private key the
- key derivation algorithm is different. Normally MD5(password) is
- used as a 128 bit RC4 key. In the modified case
- MD5(MD5(password) + "SGCKEYSALT") is used insted. Added some
- new functions i2d_RSA_NET(), d2i_RSA_NET() etc which are the same
- as the old Netscape_RSA functions except they have an additional
- 'sgckey' parameter which uses the modified algorithm. Also added
- an -sgckey command line option to the rsa utility. Thanks to
- Adrian Peck <bertie@ncipher.com> for posting details of the modified
- algorithm to openssl-dev.
- [Steve Henson]
- *) The evp_local.h macros were using 'c.##kname' which resulted in
- invalid expansion on some systems (SCO 5.0.5 for example).
- Corrected to 'c.kname'.
- [Phillip Porch <root@theporch.com>]
- *) New X509_get1_email() and X509_REQ_get1_email() functions that return
- a STACK of email addresses from a certificate or request, these look
- in the subject name and the subject alternative name extensions and
- omit any duplicate addresses.
- [Steve Henson]
- *) Re-implement BN_mod_exp2_mont using independent (and larger) windows.
- This makes DSA verification about 2 % faster.
- [Bodo Moeller]
- *) Increase maximum window size in BN_mod_exp_... to 6 bits instead of 5
- (meaning that now 2^5 values will be precomputed, which is only 4 KB
- plus overhead for 1024 bit moduli).
- This makes exponentiations about 0.5 % faster for 1024 bit
- exponents (as measured by "openssl speed rsa2048").
- [Bodo Moeller]
- *) Rename memory handling macros to avoid conflicts with other
- software:
- Malloc => OPENSSL_malloc
- Malloc_locked => OPENSSL_malloc_locked
- Realloc => OPENSSL_realloc
- Free => OPENSSL_free
- [Richard Levitte]
- *) New function BN_mod_exp_mont_word for small bases (roughly 15%
- faster than BN_mod_exp_mont, i.e. 7% for a full DH exchange).
- [Bodo Moeller]
- *) CygWin32 support.
- [John Jarvie <jjarvie@newsguy.com>]
- *) The type-safe stack code has been rejigged. It is now only compiled
- in when OpenSSL is configured with the DEBUG_SAFESTACK option and
- by default all type-specific stack functions are "#define"d back to
- standard stack functions. This results in more streamlined output
- but retains the type-safety checking possibilities of the original
- approach.
- [Geoff Thorpe]
- *) The STACK code has been cleaned up, and certain type declarations
- that didn't make a lot of sense have been brought in line. This has
- also involved a cleanup of sorts in safestack.h to more correctly
- map type-safe stack functions onto their plain stack counterparts.
- This work has also resulted in a variety of "const"ifications of
- lots of the code, especially "_cmp" operations which should normally
- be prototyped with "const" parameters anyway.
- [Geoff Thorpe]
- *) When generating bytes for the first time in md_rand.c, 'stir the pool'
- by seeding with STATE_SIZE dummy bytes (with zero entropy count).
- (The PRNG state consists of two parts, the large pool 'state' and 'md',
- where all of 'md' is used each time the PRNG is used, but 'state'
- is used only indexed by a cyclic counter. As entropy may not be
- well distributed from the beginning, 'md' is important as a
- chaining variable. However, the output function chains only half
- of 'md', i.e. 80 bits. ssleay_rand_add, on the other hand, chains
- all of 'md', and seeding with STATE_SIZE dummy bytes will result
- in all of 'state' being rewritten, with the new values depending
- on virtually all of 'md'. This overcomes the 80 bit limitation.)
- [Bodo Moeller]
- *) In ssl/s2_clnt.c and ssl/s3_clnt.c, call ERR_clear_error() when
- the handshake is continued after ssl_verify_cert_chain();
- otherwise, if SSL_VERIFY_NONE is set, remaining error codes
- can lead to 'unexplainable' connection aborts later.
- [Bodo Moeller; problem tracked down by Lutz Jaenicke]
- *) Major EVP API cipher revision.
- Add hooks for extra EVP features. This allows various cipher
- parameters to be set in the EVP interface. Support added for variable
- key length ciphers via the EVP_CIPHER_CTX_set_key_length() function and
- setting of RC2 and RC5 parameters.
- Modify EVP_OpenInit() and EVP_SealInit() to cope with variable key length
- ciphers.
- Remove lots of duplicated code from the EVP library. For example *every*
- cipher init() function handles the 'iv' in the same way according to the
- cipher mode. They also all do nothing if the 'key' parameter is NULL and
- for CFB and OFB modes they zero ctx->num.
- New functionality allows removal of S/MIME code RC2 hack.
- Most of the routines have the same form and so can be declared in terms
- of macros.
- By shifting this to the top level EVP_CipherInit() it can be removed from
- all individual ciphers. If the cipher wants to handle IVs or keys
- differently it can set the EVP_CIPH_CUSTOM_IV or EVP_CIPH_ALWAYS_CALL_INIT
- flags.
- Change lots of functions like EVP_EncryptUpdate() to now return a
- value: although software versions of the algorithms cannot fail
- any installed hardware versions can.
- [Steve Henson]
- *) Implement SSL_OP_TLS_ROLLBACK_BUG: In ssl3_get_client_key_exchange, if
- this option is set, tolerate broken clients that send the negotiated
- protocol version number instead of the requested protocol version
- number.
- [Bodo Moeller]
- *) Call dh_tmp_cb (set by ..._TMP_DH_CB) with correct 'is_export' flag;
- i.e. non-zero for export ciphersuites, zero otherwise.
- Previous versions had this flag inverted, inconsistent with
- rsa_tmp_cb (..._TMP_RSA_CB).
- [Bodo Moeller; problem reported by Amit Chopra]
- *) Add missing DSA library text string. Work around for some IIS
- key files with invalid SEQUENCE encoding.
- [Steve Henson]
- *) Add a document (doc/standards.txt) that list all kinds of standards
- and so on that are implemented in OpenSSL.
- [Richard Levitte]
- *) Enhance c_rehash script. Old version would mishandle certificates
- with the same subject name hash and wouldn't handle CRLs at all.
- Added -fingerprint option to crl utility, to support new c_rehash
- features.
- [Steve Henson]
- *) Eliminate non-ANSI declarations in crypto.h and stack.h.
- [Ulf Möller]
- *) Fix for SSL server purpose checking. Server checking was
- rejecting certificates which had extended key usage present
- but no ssl client purpose.
- [Steve Henson, reported by Rene Grosser <grosser@hisolutions.com>]
- *) Make PKCS#12 code work with no password. The PKCS#12 spec
- is a little unclear about how a blank password is handled.
- Since the password in encoded as a BMPString with terminating
- double NULL a zero length password would end up as just the
- double NULL. However no password at all is different and is
- handled differently in the PKCS#12 key generation code. NS
- treats a blank password as zero length. MSIE treats it as no
- password on export: but it will try both on import. We now do
- the same: PKCS12_parse() tries zero length and no password if
- the password is set to "" or NULL (NULL is now a valid password:
- it wasn't before) as does the pkcs12 application.
- [Steve Henson]
- *) Bugfixes in apps/x509.c: Avoid a memory leak; and don't use
- perror when PEM_read_bio_X509_REQ fails, the error message must
- be obtained from the error queue.
- [Bodo Moeller]
- *) Avoid 'thread_hash' memory leak in crypto/err/err.c by freeing
- it in ERR_remove_state if appropriate, and change ERR_get_state
- accordingly to avoid race conditions (this is necessary because
- thread_hash is no longer constant once set).
- [Bodo Moeller]
- *) Bugfix for linux-elf makefile.one.
- [Ulf Möller]
- *) RSA_get_default_method() will now cause a default
- RSA_METHOD to be chosen if one doesn't exist already.
- Previously this was only set during a call to RSA_new()
- or RSA_new_method(NULL) meaning it was possible for
- RSA_get_default_method() to return NULL.
- [Geoff Thorpe]
- *) Added native name translation to the existing DSO code
- that will convert (if the flag to do so is set) filenames
- that are sufficiently small and have no path information
- into a canonical native form. Eg. "blah" converted to
- "libblah.so" or "blah.dll" etc.
- [Geoff Thorpe]
- *) New function ERR_error_string_n(e, buf, len) which is like
- ERR_error_string(e, buf), but writes at most 'len' bytes
- including the 0 terminator. For ERR_error_string_n, 'buf'
- may not be NULL.
- [Damien Miller <djm@mindrot.org>, Bodo Moeller]
- *) CONF library reworked to become more general. A new CONF
- configuration file reader "class" is implemented as well as a
- new functions (NCONF_*, for "New CONF") to handle it. The now
- old CONF_* functions are still there, but are reimplemented to
- work in terms of the new functions. Also, a set of functions
- to handle the internal storage of the configuration data is
- provided to make it easier to write new configuration file
- reader "classes" (I can definitely see something reading a
- configuration file in XML format, for example), called _CONF_*,
- or "the configuration storage API"...
- The new configuration file reading functions are:
- NCONF_new, NCONF_free, NCONF_load, NCONF_load_fp, NCONF_load_bio,
- NCONF_get_section, NCONF_get_string, NCONF_get_numbre
- NCONF_default, NCONF_WIN32
- NCONF_dump_fp, NCONF_dump_bio
- NCONF_default and NCONF_WIN32 are method (or "class") choosers,
- NCONF_new creates a new CONF object. This works in the same way
- as other interfaces in OpenSSL, like the BIO interface.
- NCONF_dump_* dump the internal storage of the configuration file,
- which is useful for debugging. All other functions take the same
- arguments as the old CONF_* functions wth the exception of the
- first that must be a `CONF *' instead of a `LHASH *'.
- To make it easer to use the new classes with the old CONF_* functions,
- the function CONF_set_default_method is provided.
- [Richard Levitte]
- *) Add '-tls1' option to 'openssl ciphers', which was already
- mentioned in the documentation but had not been implemented.
- (This option is not yet really useful because even the additional
- experimental TLS 1.0 ciphers are currently treated as SSL 3.0 ciphers.)
- [Bodo Moeller]
- *) Initial DSO code added into libcrypto for letting OpenSSL (and
- OpenSSL-based applications) load shared libraries and bind to
- them in a portable way.
- [Geoff Thorpe, with contributions from Richard Levitte]
- Changes between 0.9.5 and 0.9.5a [1 Apr 2000]
- *) Make sure _lrotl and _lrotr are only used with MSVC.
- *) Use lock CRYPTO_LOCK_RAND correctly in ssleay_rand_status
- (the default implementation of RAND_status).
- *) Rename openssl x509 option '-crlext', which was added in 0.9.5,
- to '-clrext' (= clear extensions), as intended and documented.
- [Bodo Moeller; inconsistency pointed out by Michael Attili
- <attili@amaxo.com>]
- *) Fix for HMAC. It wasn't zeroing the rest of the block if the key length
- was larger than the MD block size.
- [Steve Henson, pointed out by Yost William <YostW@tce.com>]
- *) Modernise PKCS12_parse() so it uses STACK_OF(X509) for its ca argument
- fix a leak when the ca argument was passed as NULL. Stop X509_PUBKEY_set()
- using the passed key: if the passed key was a private key the result
- of X509_print(), for example, would be to print out all the private key
- components.
- [Steve Henson]
- *) des_quad_cksum() byte order bug fix.
- [Ulf Möller, using the problem description in krb4-0.9.7, where
- the solution is attributed to Derrick J Brashear <shadow@DEMENTIA.ORG>]
- *) Fix so V_ASN1_APP_CHOOSE works again: however its use is strongly
- discouraged.
- [Steve Henson, pointed out by Brian Korver <briank@cs.stanford.edu>]
- *) For easily testing in shell scripts whether some command
- 'openssl XXX' exists, the new pseudo-command 'openssl no-XXX'
- returns with exit code 0 iff no command of the given name is available.
- 'no-XXX' is printed in this case, 'XXX' otherwise. In both cases,
- the output goes to stdout and nothing is printed to stderr.
- Additional arguments are always ignored.
- Since for each cipher there is a command of the same name,
- the 'no-cipher' compilation switches can be tested this way.
- ('openssl no-XXX' is not able to detect pseudo-commands such
- as 'quit', 'list-XXX-commands', or 'no-XXX' itself.)
- [Bodo Moeller]
- *) Update test suite so that 'make test' succeeds in 'no-rsa' configuration.
- [Bodo Moeller]
- *) For SSL_[CTX_]set_tmp_dh, don't create a DH key if SSL_OP_SINGLE_DH_USE
- is set; it will be thrown away anyway because each handshake creates
- its own key.
- ssl_cert_dup, which is used by SSL_new, now copies DH keys in addition
- to parameters -- in previous versions (since OpenSSL 0.9.3) the
- 'default key' from SSL_CTX_set_tmp_dh would always be lost, meanining
- you effectivly got SSL_OP_SINGLE_DH_USE when using this macro.
- [Bodo Moeller]
- *) New s_client option -ign_eof: EOF at stdin is ignored, and
- 'Q' and 'R' lose their special meanings (quit/renegotiate).
- This is part of what -quiet does; unlike -quiet, -ign_eof
- does not suppress any output.
- [Richard Levitte]
- *) Add compatibility options to the purpose and trust code. The
- purpose X509_PURPOSE_ANY is "any purpose" which automatically
- accepts a certificate or CA, this was the previous behaviour,
- with all the associated security issues.
- X509_TRUST_COMPAT is the old trust behaviour: only and
- automatically trust self signed roots in certificate store. A
- new trust setting X509_TRUST_DEFAULT is used to specify that
- a purpose has no associated trust setting and it should instead
- use the value in the default purpose.
- [Steve Henson]
- *) Fix the PKCS#8 DSA private key code so it decodes keys again
- and fix a memory leak.
- [Steve Henson]
- *) In util/mkerr.pl (which implements 'make errors'), preserve
- reason strings from the previous version of the .c file, as
- the default to have only downcase letters (and digits) in
- automatically generated reasons codes is not always appropriate.
- [Bodo Moeller]
- *) In ERR_load_ERR_strings(), build an ERR_LIB_SYS error reason table
- using strerror. Previously, ERR_reason_error_string() returned
- library names as reason strings for SYSerr; but SYSerr is a special
- case where small numbers are errno values, not library numbers.
- [Bodo Moeller]
- *) Add '-dsaparam' option to 'openssl dhparam' application. This
- converts DSA parameters into DH parameters. (When creating parameters,
- DSA_generate_parameters is used.)
- [Bodo Moeller]
- *) Include 'length' (recommended exponent length) in C code generated
- by 'openssl dhparam -C'.
- [Bodo Moeller]
- *) The second argument to set_label in perlasm was already being used
- so couldn't be used as a "file scope" flag. Moved to third argument
- which was free.
- [Steve Henson]
- *) In PEM_ASN1_write_bio and some other functions, use RAND_pseudo_bytes
- instead of RAND_bytes for encryption IVs and salts.
- [Bodo Moeller]
- *) Include RAND_status() into RAND_METHOD instead of implementing
- it only for md_rand.c Otherwise replacing the PRNG by calling
- RAND_set_rand_method would be impossible.
- [Bodo Moeller]
- *) Don't let DSA_generate_key() enter an infinite loop if the random
- number generation fails.
- [Bodo Moeller]
- *) New 'rand' application for creating pseudo-random output.
- [Bodo Moeller]
- *) Added configuration support for Linux/IA64
- [Rolf Haberrecker <rolf@suse.de>]
- *) Assembler module support for Mingw32.
- [Ulf Möller]
- *) Shared library support for HPUX (in shlib/).
- [Lutz Jaenicke <Lutz.Jaenicke@aet.TU-Cottbus.DE> and Anonymous]
- *) Shared library support for Solaris gcc.
- [Lutz Behnke <behnke@trustcenter.de>]
- Changes between 0.9.4 and 0.9.5 [28 Feb 2000]
- *) PKCS7_encrypt() was adding text MIME headers twice because they
- were added manually and by SMIME_crlf_copy().
- [Steve Henson]
- *) In bntest.c don't call BN_rand with zero bits argument.
- [Steve Henson, pointed out by Andrew W. Gray <agray@iconsinc.com>]
- *) BN_mul bugfix: In bn_mul_part_recursion() only the a>a[n] && b>b[n]
- case was implemented. This caused BN_div_recp() to fail occasionally.
- [Ulf Möller]
- *) Add an optional second argument to the set_label() in the perl
- assembly language builder. If this argument exists and is set
- to 1 it signals that the assembler should use a symbol whose
- scope is the entire file, not just the current function. This
- is needed with MASM which uses the format label:: for this scope.
- [Steve Henson, pointed out by Peter Runestig <peter@runestig.com>]
- *) Change the ASN1 types so they are typedefs by default. Before
- almost all types were #define'd to ASN1_STRING which was causing
- STACK_OF() problems: you couldn't declare STACK_OF(ASN1_UTF8STRING)
- for example.
- [Steve Henson]
- *) Change names of new functions to the new get1/get0 naming
- convention: After 'get1', the caller owns a reference count
- and has to call ..._free; 'get0' returns a pointer to some
- data structure without incrementing reference counters.
- (Some of the existing 'get' functions increment a reference
- counter, some don't.)
- Similarly, 'set1' and 'add1' functions increase reference
- counters or duplicate objects.
- [Steve Henson]
- *) Allow for the possibility of temp RSA key generation failure:
- the code used to assume it always worked and crashed on failure.
- [Steve Henson]
- *) Fix potential buffer overrun problem in BIO_printf().
- [Ulf Möller, using public domain code by Patrick Powell; problem
- pointed out by David Sacerdote <das33@cornell.edu>]
- *) Support EGD <http://www.lothar.com/tech/crypto/>. New functions
- RAND_egd() and RAND_status(). In the command line application,
- the EGD socket can be specified like a seed file using RANDFILE
- or -rand.
- [Ulf Möller]
- *) Allow the string CERTIFICATE to be tolerated in PKCS#7 structures.
- Some CAs (e.g. Verisign) distribute certificates in this form.
- [Steve Henson]
- *) Remove the SSL_ALLOW_ADH compile option and set the default cipher
- list to exclude them. This means that no special compilation option
- is needed to use anonymous DH: it just needs to be included in the
- cipher list.
- [Steve Henson]
- *) Change the EVP_MD_CTX_type macro so its meaning consistent with
- EVP_MD_type. The old functionality is available in a new macro called
- EVP_MD_md(). Change code that uses it and update docs.
- [Steve Henson]
- *) ..._ctrl functions now have corresponding ..._callback_ctrl functions
- where the 'void *' argument is replaced by a function pointer argument.
- Previously 'void *' was abused to point to functions, which works on
- many platforms, but is not correct. As these functions are usually
- called by macros defined in OpenSSL header files, most source code
- should work without changes.
- [Richard Levitte]
- *) <openssl/opensslconf.h> (which is created by Configure) now contains
- sections with information on -D... compiler switches used for
- compiling the library so that applications can see them. To enable
- one of these sections, a pre-processor symbol OPENSSL_..._DEFINES
- must be defined. E.g.,
- #define OPENSSL_ALGORITHM_DEFINES
- #include <openssl/opensslconf.h>
- defines all pertinent NO_<algo> symbols, such as NO_IDEA, NO_RSA, etc.
- [Richard Levitte, Ulf and Bodo Möller]
- *) Bugfix: Tolerate fragmentation and interleaving in the SSL 3/TLS
- record layer.
- [Bodo Moeller]
- *) Change the 'other' type in certificate aux info to a STACK_OF
- X509_ALGOR. Although not an AlgorithmIdentifier as such it has
- the required ASN1 format: arbitrary types determined by an OID.
- [Steve Henson]
- *) Add some PEM_write_X509_REQ_NEW() functions and a command line
- argument to 'req'. This is not because the function is newer or
- better than others it just uses the work 'NEW' in the certificate
- request header lines. Some software needs this.
- [Steve Henson]
- *) Reorganise password command line arguments: now passwords can be
- obtained from various sources. Delete the PEM_cb function and make
- it the default behaviour: i.e. if the callback is NULL and the
- usrdata argument is not NULL interpret it as a null terminated pass
- phrase. If usrdata and the callback are NULL then the pass phrase
- is prompted for as usual.
- [Steve Henson]
- *) Add support for the Compaq Atalla crypto accelerator. If it is installed,
- the support is automatically enabled. The resulting binaries will
- autodetect the card and use it if present.
- [Ben Laurie and Compaq Inc.]
- *) Work around for Netscape hang bug. This sends certificate request
- and server done in one record. Since this is perfectly legal in the
- SSL/TLS protocol it isn't a "bug" option and is on by default. See
- the bugs/SSLv3 entry for more info.
- [Steve Henson]
- *) HP-UX tune-up: new unified configs, HP C compiler bug workaround.
- [Andy Polyakov]
- *) Add -rand argument to smime and pkcs12 applications and read/write
- of seed file.
- [Steve Henson]
- *) New 'passwd' tool for crypt(3) and apr1 password hashes.
- [Bodo Moeller]
- *) Add command line password options to the remaining applications.
- [Steve Henson]
- *) Bug fix for BN_div_recp() for numerators with an even number of
- bits.
- [Ulf Möller]
- *) More tests in bntest.c, and changed test_bn output.
- [Ulf Möller]
- *) ./config recognizes MacOS X now.
- [Andy Polyakov]
- *) Bug fix for BN_div() when the first words of num and divsor are
- equal (it gave wrong results if (rem=(n1-q*d0)&BN_MASK2) < d0).
- [Ulf Möller]
- *) Add support for various broken PKCS#8 formats, and command line
- options to produce them.
- [Steve Henson]
- *) New functions BN_CTX_start(), BN_CTX_get() and BT_CTX_end() to
- get temporary BIGNUMs from a BN_CTX.
- [Ulf Möller]
- *) Correct return values in BN_mod_exp_mont() and BN_mod_exp2_mont()
- for p == 0.
- [Ulf Möller]
- *) Change the SSLeay_add_all_*() functions to OpenSSL_add_all_*() and
- include a #define from the old name to the new. The original intent
- was that statically linked binaries could for example just call
- SSLeay_add_all_ciphers() to just add ciphers to the table and not
- link with digests. This never worked becayse SSLeay_add_all_digests()
- and SSLeay_add_all_ciphers() were in the same source file so calling
- one would link with the other. They are now in separate source files.
- [Steve Henson]
- *) Add a new -notext option to 'ca' and a -pubkey option to 'spkac'.
- [Steve Henson]
- *) Use a less unusual form of the Miller-Rabin primality test (it used
- a binary algorithm for exponentiation integrated into the Miller-Rabin
- loop, our standard modexp algorithms are faster).
- [Bodo Moeller]
- *) Support for the EBCDIC character set completed.
- [Martin Kraemer <Martin.Kraemer@Mch.SNI.De>]
- *) Source code cleanups: use const where appropriate, eliminate casts,
- use void * instead of char * in lhash.
- [Ulf Möller]
- *) Bugfix: ssl3_send_server_key_exchange was not restartable
- (the state was not changed to SSL3_ST_SW_KEY_EXCH_B, and because of
- this the server could overwrite ephemeral keys that the client
- has already seen).
- [Bodo Moeller]
- *) Turn DSA_is_prime into a macro that calls BN_is_prime,
- using 50 iterations of the Rabin-Miller test.
- DSA_generate_parameters now uses BN_is_prime_fasttest (with 50
- iterations of the Rabin-Miller test as required by the appendix
- to FIPS PUB 186[-1]) instead of DSA_is_prime.
- As BN_is_prime_fasttest includes trial division, DSA parameter
- generation becomes much faster.
- This implies a change for the callback functions in DSA_is_prime
- and DSA_generate_parameters: The callback function is called once
- for each positive witness in the Rabin-Miller test, not just
- occasionally in the inner loop; and the parameters to the
- callback function now provide an iteration count for the outer
- loop rather than for the current invocation of the inner loop.
- DSA_generate_parameters additionally can call the callback
- function with an 'iteration count' of -1, meaning that a
- candidate has passed the trial division test (when q is generated
- from an application-provided seed, trial division is skipped).
- [Bodo Moeller]
- *) New function BN_is_prime_fasttest that optionally does trial
- division before starting the Rabin-Miller test and has
- an additional BN_CTX * argument (whereas BN_is_prime always
- has to allocate at least one BN_CTX).
- 'callback(1, -1, cb_arg)' is called when a number has passed the
- trial division stage.
- [Bodo Moeller]
- *) Fix for bug in CRL encoding. The validity dates weren't being handled
- as ASN1_TIME.
- [Steve Henson]
- *) New -pkcs12 option to CA.pl script to write out a PKCS#12 file.
- [Steve Henson]
- *) New function BN_pseudo_rand().
- [Ulf Möller]
- *) Clean up BN_mod_mul_montgomery(): replace the broken (and unreadable)
- bignum version of BN_from_montgomery() with the working code from
- SSLeay 0.9.0 (the word based version is faster anyway), and clean up
- the comments.
- [Ulf Möller]
- *) Avoid a race condition in s2_clnt.c (function get_server_hello) that
- made it impossible to use the same SSL_SESSION data structure in
- SSL2 clients in multiple threads.
- [Bodo Moeller]
- *) The return value of RAND_load_file() no longer counts bytes obtained
- by stat(). RAND_load_file(..., -1) is new and uses the complete file
- to seed the PRNG (previously an explicit byte count was required).
- [Ulf Möller, Bodo Möller]
- *) Clean up CRYPTO_EX_DATA functions, some of these didn't have prototypes
- used (char *) instead of (void *) and had casts all over the place.
- [Steve Henson]
- *) Make BN_generate_prime() return NULL on error if ret!=NULL.
- [Ulf Möller]
- *) Retain source code compatibility for BN_prime_checks macro:
- BN_is_prime(..., BN_prime_checks, ...) now uses
- BN_prime_checks_for_size to determine the appropriate number of
- Rabin-Miller iterations.
- [Ulf Möller]
- *) Diffie-Hellman uses "safe" primes: DH_check() return code renamed to
- DH_CHECK_P_NOT_SAFE_PRIME.
- (Check if this is true? OpenPGP calls them "strong".)
- [Ulf Möller]
- *) Merge the functionality of "dh" and "gendh" programs into a new program
- "dhparam". The old programs are retained for now but will handle DH keys
- (instead of parameters) in future.
- [Steve Henson]
- *) Make the ciphers, s_server and s_client programs check the return values
- when a new cipher list is set.
- [Steve Henson]
- *) Enhance the SSL/TLS cipher mechanism to correctly handle the TLS 56bit
- ciphers. Before when the 56bit ciphers were enabled the sorting was
- wrong.
- The syntax for the cipher sorting has been extended to support sorting by
- cipher-strength (using the strength_bits hard coded in the tables).
- The new command is "@STRENGTH" (see also doc/apps/ciphers.pod).
- Fix a bug in the cipher-command parser: when supplying a cipher command
- string with an "undefined" symbol (neither command nor alphanumeric
- [A-Za-z0-9], ssl_set_cipher_list used to hang in an endless loop. Now
- an error is flagged.
- Due to the strength-sorting extension, the code of the
- ssl_create_cipher_list() function was completely rearranged. I hope that
- the readability was also increased :-)
- [Lutz Jaenicke <Lutz.Jaenicke@aet.TU-Cottbus.DE>]
- *) Minor change to 'x509' utility. The -CAcreateserial option now uses 1
- for the first serial number and places 2 in the serial number file. This
- avoids problems when the root CA is created with serial number zero and
- the first user certificate has the same issuer name and serial number
- as the root CA.
- [Steve Henson]
- *) Fixes to X509_ATTRIBUTE utilities, change the 'req' program so it uses
- the new code. Add documentation for this stuff.
- [Steve Henson]
- *) Changes to X509_ATTRIBUTE utilities. These have been renamed from
- X509_*() to X509at_*() on the grounds that they don't handle X509
- structures and behave in an analagous way to the X509v3 functions:
- they shouldn't be called directly but wrapper functions should be used
- instead.
- So we also now have some wrapper functions that call the X509at functions
- when passed certificate requests. (TO DO: similar things can be done with
- PKCS#7 signed and unsigned attributes, PKCS#12 attributes and a few other
- things. Some of these need some d2i or i2d and print functionality
- because they handle more complex structures.)
- [Steve Henson]
- *) Add missing #ifndefs that caused missing symbols when building libssl
- as a shared library without RSA. Use #ifndef NO_SSL2 instead of
- NO_RSA in ssl/s2*.c.
- [Kris Kennaway <kris@hub.freebsd.org>, modified by Ulf Möller]
- *) Precautions against using the PRNG uninitialized: RAND_bytes() now
- has a return value which indicates the quality of the random data
- (1 = ok, 0 = not seeded). Also an error is recorded on the thread's
- error queue. New function RAND_pseudo_bytes() generates output that is
- guaranteed to be unique but not unpredictable. RAND_add is like
- RAND_seed, but takes an extra argument for an entropy estimate
- (RAND_seed always assumes full entropy).
- [Ulf Möller]
- *) Do more iterations of Rabin-Miller probable prime test (specifically,
- 3 for 1024-bit primes, 6 for 512-bit primes, 12 for 256-bit primes
- instead of only 2 for all lengths; see BN_prime_checks_for_size definition
- in crypto/bn/bn_prime.c for the complete table). This guarantees a
- false-positive rate of at most 2^-80 for random input.
- [Bodo Moeller]
- *) Rewrite ssl3_read_n (ssl/s3_pkt.c) avoiding a couple of bugs.
- [Bodo Moeller]
- *) New function X509_CTX_rget_chain() (renamed to X509_CTX_get1_chain
- in the 0.9.5 release), this returns the chain
- from an X509_CTX structure with a dup of the stack and all
- the X509 reference counts upped: so the stack will exist
- after X509_CTX_cleanup() has been called. Modify pkcs12.c
- to use this.
- Also make SSL_SESSION_print() print out the verify return
- code.
- [Steve Henson]
- *) Add manpage for the pkcs12 command. Also change the default
- behaviour so MAC iteration counts are used unless the new
- -nomaciter option is used. This improves file security and
- only older versions of MSIE (4.0 for example) need it.
- [Steve Henson]
- *) Honor the no-xxx Configure options when creating .DEF files.
- [Ulf Möller]
- *) Add PKCS#10 attributes to field table: challengePassword,
- unstructuredName and unstructuredAddress. These are taken from
- draft PKCS#9 v2.0 but are compatible with v1.2 provided no
- international characters are used.
- More changes to X509_ATTRIBUTE code: allow the setting of types
- based on strings. Remove the 'loc' parameter when adding
- attributes because these will be a SET OF encoding which is sorted
- in ASN1 order.
- [Steve Henson]
- *) Initial changes to the 'req' utility to allow request generation
- automation. This will allow an application to just generate a template
- file containing all the field values and have req construct the
- request.
- Initial support for X509_ATTRIBUTE handling. Stacks of these are
- used all over the place including certificate requests and PKCS#7
- structures. They are currently handled manually where necessary with
- some primitive wrappers for PKCS#7. The new functions behave in a
- manner analogous to the X509 extension functions: they allow
- attributes to be looked up by NID and added.
- Later something similar to the X509V3 code would be desirable to
- automatically handle the encoding, decoding and printing of the
- more complex types. The string types like challengePassword can
- be handled by the string table functions.
- Also modified the multi byte string table handling. Now there is
- a 'global mask' which masks out certain types. The table itself
- can use the flag STABLE_NO_MASK to ignore the mask setting: this
- is useful when for example there is only one permissible type
- (as in countryName) and using the mask might result in no valid
- types at all.
- [Steve Henson]
- *) Clean up 'Finished' handling, and add functions SSL_get_finished and
- SSL_get_peer_finished to allow applications to obtain the latest
- Finished messages sent to the peer or expected from the peer,
- respectively. (SSL_get_peer_finished is usually the Finished message
- actually received from the peer, otherwise the protocol will be aborted.)
- As the Finished message are message digests of the complete handshake
- (with a total of 192 bits for TLS 1.0 and more for SSL 3.0), they can
- be used for external authentication procedures when the authentication
- provided by SSL/TLS is not desired or is not enough.
- [Bodo Moeller]
- *) Enhanced support for Alpha Linux is added. Now ./config checks if
- the host supports BWX extension and if Compaq C is present on the
- $PATH. Just exploiting of the BWX extension results in 20-30%
- performance kick for some algorithms, e.g. DES and RC4 to mention
- a couple. Compaq C in turn generates ~20% faster code for MD5 and
- SHA1.
- [Andy Polyakov]
- *) Add support for MS "fast SGC". This is arguably a violation of the
- SSL3/TLS protocol. Netscape SGC does two handshakes: the first with
- weak crypto and after checking the certificate is SGC a second one
- with strong crypto. MS SGC stops the first handshake after receiving
- the server certificate message and sends a second client hello. Since
- a server will typically do all the time consuming operations before
- expecting any further messages from the client (server key exchange
- is the most expensive) there is little difference between the two.
- To get OpenSSL to support MS SGC we have to permit a second client
- hello message after we have sent server done. In addition we have to
- reset the MAC if we do get this second client hello.
- [Steve Henson]
- *) Add a function 'd2i_AutoPrivateKey()' this will automatically decide
- if a DER encoded private key is RSA or DSA traditional format. Changed
- d2i_PrivateKey_bio() to use it. This is only needed for the "traditional"
- format DER encoded private key. Newer code should use PKCS#8 format which
- has the key type encoded in the ASN1 structure. Added DER private key
- support to pkcs8 application.
- [Steve Henson]
- *) SSL 3/TLS 1 servers now don't request certificates when an anonymous
- ciphersuites has been selected (as required by the SSL 3/TLS 1
- specifications). Exception: When SSL_VERIFY_FAIL_IF_NO_PEER_CERT
- is set, we interpret this as a request to violate the specification
- (the worst that can happen is a handshake failure, and 'correct'
- behaviour would result in a handshake failure anyway).
- [Bodo Moeller]
- *) In SSL_CTX_add_session, take into account that there might be multiple
- SSL_SESSION structures with the same session ID (e.g. when two threads
- concurrently obtain them from an external cache).
- The internal cache can handle only one SSL_SESSION with a given ID,
- so if there's a conflict, we now throw out the old one to achieve
- consistency.
- [Bodo Moeller]
- *) Add OIDs for idea and blowfish in CBC mode. This will allow both
- to be used in PKCS#5 v2.0 and S/MIME. Also add checking to
- some routines that use cipher OIDs: some ciphers do not have OIDs
- defined and so they cannot be used for S/MIME and PKCS#5 v2.0 for
- example.
- [Steve Henson]
- *) Simplify the trust setting structure and code. Now we just have
- two sequences of OIDs for trusted and rejected settings. These will
- typically have values the same as the extended key usage extension
- and any application specific purposes.
- The trust checking code now has a default behaviour: it will just
- check for an object with the same NID as the passed id. Functions can
- be provided to override either the default behaviour or the behaviour
- for a given id. SSL client, server and email already have functions
- in place for compatibility: they check the NID and also return "trusted"
- if the certificate is self signed.
- [Steve Henson]
- *) Add d2i,i2d bio/fp functions for PrivateKey: these convert the
- traditional format into an EVP_PKEY structure.
- [Steve Henson]
- *) Add a password callback function PEM_cb() which either prompts for
- a password if usr_data is NULL or otherwise assumes it is a null
- terminated password. Allow passwords to be passed on command line
- environment or config files in a few more utilities.
- [Steve Henson]
- *) Add a bunch of DER and PEM functions to handle PKCS#8 format private
- keys. Add some short names for PKCS#8 PBE algorithms and allow them
- to be specified on the command line for the pkcs8 and pkcs12 utilities.
- Update documentation.
- [Steve Henson]
- *) Support for ASN1 "NULL" type. This could be handled before by using
- ASN1_TYPE but there wasn't any function that would try to read a NULL
- and produce an error if it couldn't. For compatibility we also have
- ASN1_NULL_new() and ASN1_NULL_free() functions but these are faked and
- don't allocate anything because they don't need to.
- [Steve Henson]
- *) Initial support for MacOS is now provided. Examine INSTALL.MacOS
- for details.
- [Andy Polyakov, Roy Woods <roy@centicsystems.ca>]
- *) Rebuild of the memory allocation routines used by OpenSSL code and
- possibly others as well. The purpose is to make an interface that
- provide hooks so anyone can build a separate set of allocation and
- deallocation routines to be used by OpenSSL, for example memory
- pool implementations, or something else, which was previously hard
- since Malloc(), Realloc() and Free() were defined as macros having
- the values malloc, realloc and free, respectively (except for Win32
- compilations). The same is provided for memory debugging code.
- OpenSSL already comes with functionality to find memory leaks, but
- this gives people a chance to debug other memory problems.
- With these changes, a new set of functions and macros have appeared:
- CRYPTO_set_mem_debug_functions() [F]
- CRYPTO_get_mem_debug_functions() [F]
- CRYPTO_dbg_set_options() [F]
- CRYPTO_dbg_get_options() [F]
- CRYPTO_malloc_debug_init() [M]
- The memory debug functions are NULL by default, unless the library
- is compiled with CRYPTO_MDEBUG or friends is defined. If someone
- wants to debug memory anyway, CRYPTO_malloc_debug_init() (which
- gives the standard debugging functions that come with OpenSSL) or
- CRYPTO_set_mem_debug_functions() (tells OpenSSL to use functions
- provided by the library user) must be used. When the standard
- debugging functions are used, CRYPTO_dbg_set_options can be used to
- request additional information:
- CRYPTO_dbg_set_options(V_CYRPTO_MDEBUG_xxx) corresponds to setting
- the CRYPTO_MDEBUG_xxx macro when compiling the library.
- Also, things like CRYPTO_set_mem_functions will always give the
- expected result (the new set of functions is used for allocation
- and deallocation) at all times, regardless of platform and compiler
- options.
- To finish it up, some functions that were never use in any other
- way than through macros have a new API and new semantic:
- CRYPTO_dbg_malloc()
- CRYPTO_dbg_realloc()
- CRYPTO_dbg_free()
- All macros of value have retained their old syntax.
- [Richard Levitte and Bodo Moeller]
- *) Some S/MIME fixes. The OID for SMIMECapabilities was wrong, the
- ordering of SMIMECapabilities wasn't in "strength order" and there
- was a missing NULL in the AlgorithmIdentifier for the SHA1 signature
- algorithm.
- [Steve Henson]
- *) Some ASN1 types with illegal zero length encoding (INTEGER,
- ENUMERATED and OBJECT IDENTIFIER) choked the ASN1 routines.
- [Frans Heymans <fheymans@isaserver.be>, modified by Steve Henson]
- *) Merge in my S/MIME library for OpenSSL. This provides a simple
- S/MIME API on top of the PKCS#7 code, a MIME parser (with enough
- functionality to handle multipart/signed properly) and a utility
- called 'smime' to call all this stuff. This is based on code I
- originally wrote for Celo who have kindly allowed it to be
- included in OpenSSL.
- [Steve Henson]
- *) Add variants des_set_key_checked and des_set_key_unchecked of
- des_set_key (aka des_key_sched). Global variable des_check_key
- decides which of these is called by des_set_key; this way
- des_check_key behaves as it always did, but applications and
- the library itself, which was buggy for des_check_key == 1,
- have a cleaner way to pick the version they need.
- [Bodo Moeller]
- *) New function PKCS12_newpass() which changes the password of a
- PKCS12 structure.
- [Steve Henson]
- *) Modify X509_TRUST and X509_PURPOSE so it also uses a static and
- dynamic mix. In both cases the ids can be used as an index into the
- table. Also modified the X509_TRUST_add() and X509_PURPOSE_add()
- functions so they accept a list of the field values and the
- application doesn't need to directly manipulate the X509_TRUST
- structure.
- [Steve Henson]
- *) Modify the ASN1_STRING_TABLE stuff so it also uses bsearch and doesn't
- need initialising.
- [Steve Henson]
- *) Modify the way the V3 extension code looks up extensions. This now
- works in a similar way to the object code: we have some "standard"
- extensions in a static table which is searched with OBJ_bsearch()
- and the application can add dynamic ones if needed. The file
- crypto/x509v3/ext_dat.h now has the info: this file needs to be
- updated whenever a new extension is added to the core code and kept
- in ext_nid order. There is a simple program 'tabtest.c' which checks
- this. New extensions are not added too often so this file can readily
- be maintained manually.
- There are two big advantages in doing things this way. The extensions
- can be looked up immediately and no longer need to be "added" using
- X509V3_add_standard_extensions(): this function now does nothing.
- [Side note: I get *lots* of email saying the extension code doesn't
- work because people forget to call this function]
- Also no dynamic allocation is done unless new extensions are added:
- so if we don't add custom extensions there is no need to call
- X509V3_EXT_cleanup().
- [Steve Henson]
- *) Modify enc utility's salting as follows: make salting the default. Add a
- magic header, so unsalted files fail gracefully instead of just decrypting
- to garbage. This is because not salting is a big security hole, so people
- should be discouraged from doing it.
- [Ben Laurie]
- *) Fixes and enhancements to the 'x509' utility. It allowed a message
- digest to be passed on the command line but it only used this
- parameter when signing a certificate. Modified so all relevant
- operations are affected by the digest parameter including the
- -fingerprint and -x509toreq options. Also -x509toreq choked if a
- DSA key was used because it didn't fix the digest.
- [Steve Henson]
- *) Initial certificate chain verify code. Currently tests the untrusted
- certificates for consistency with the verify purpose (which is set
- when the X509_STORE_CTX structure is set up) and checks the pathlength.
- There is a NO_CHAIN_VERIFY compilation option to keep the old behaviour:
- this is because it will reject chains with invalid extensions whereas
- every previous version of OpenSSL and SSLeay made no checks at all.
- Trust code: checks the root CA for the relevant trust settings. Trust
- settings have an initial value consistent with the verify purpose: e.g.
- if the verify purpose is for SSL client use it expects the CA to be
- trusted for SSL client use. However the default value can be changed to
- permit custom trust settings: one example of this would be to only trust
- certificates from a specific "secure" set of CAs.
- Also added X509_STORE_CTX_new() and X509_STORE_CTX_free() functions
- which should be used for version portability: especially since the
- verify structure is likely to change more often now.
- SSL integration. Add purpose and trust to SSL_CTX and SSL and functions
- to set them. If not set then assume SSL clients will verify SSL servers
- and vice versa.
- Two new options to the verify program: -untrusted allows a set of
- untrusted certificates to be passed in and -purpose which sets the
- intended purpose of the certificate. If a purpose is set then the
- new chain verify code is used to check extension consistency.
- [Steve Henson]
- *) Support for the authority information access extension.
- [Steve Henson]
- *) Modify RSA and DSA PEM read routines to transparently handle
- PKCS#8 format private keys. New *_PUBKEY_* functions that handle
- public keys in a format compatible with certificate
- SubjectPublicKeyInfo structures. Unfortunately there were already
- functions called *_PublicKey_* which used various odd formats so
- these are retained for compatibility: however the DSA variants were
- never in a public release so they have been deleted. Changed dsa/rsa
- utilities to handle the new format: note no releases ever handled public
- keys so we should be OK.
- The primary motivation for this change is to avoid the same fiasco
- that dogs private keys: there are several incompatible private key
- formats some of which are standard and some OpenSSL specific and
- require various evil hacks to allow partial transparent handling and
- even then it doesn't work with DER formats. Given the option anything
- other than PKCS#8 should be dumped: but the other formats have to
- stay in the name of compatibility.
- With public keys and the benefit of hindsight one standard format
- is used which works with EVP_PKEY, RSA or DSA structures: though
- it clearly returns an error if you try to read the wrong kind of key.
- Added a -pubkey option to the 'x509' utility to output the public key.
- Also rename the EVP_PKEY_get_*() to EVP_PKEY_rget_*()
- (renamed to EVP_PKEY_get1_*() in the OpenSSL 0.9.5 release) and add
- EVP_PKEY_rset_*() functions (renamed to EVP_PKEY_set1_*())
- that do the same as the EVP_PKEY_assign_*() except they up the
- reference count of the added key (they don't "swallow" the
- supplied key).
- [Steve Henson]
- *) Fixes to crypto/x509/by_file.c the code to read in certificates and
- CRLs would fail if the file contained no certificates or no CRLs:
- added a new function to read in both types and return the number
- read: this means that if none are read it will be an error. The
- DER versions of the certificate and CRL reader would always fail
- because it isn't possible to mix certificates and CRLs in DER format
- without choking one or the other routine. Changed this to just read
- a certificate: this is the best we can do. Also modified the code
- in apps/verify.c to take notice of return codes: it was previously
- attempting to read in certificates from NULL pointers and ignoring
- any errors: this is one reason why the cert and CRL reader seemed
- to work. It doesn't check return codes from the default certificate
- routines: these may well fail if the certificates aren't installed.
- [Steve Henson]
- *) Code to support otherName option in GeneralName.
- [Steve Henson]
- *) First update to verify code. Change the verify utility
- so it warns if it is passed a self signed certificate:
- for consistency with the normal behaviour. X509_verify
- has been modified to it will now verify a self signed
- certificate if *exactly* the same certificate appears
- in the store: it was previously impossible to trust a
- single self signed certificate. This means that:
- openssl verify ss.pem
- now gives a warning about a self signed certificate but
- openssl verify -CAfile ss.pem ss.pem
- is OK.
- [Steve Henson]
- *) For servers, store verify_result in SSL_SESSION data structure
- (and add it to external session representation).
- This is needed when client certificate verifications fails,
- but an application-provided verification callback (set by
- SSL_CTX_set_cert_verify_callback) allows accepting the session
- anyway (i.e. leaves x509_store_ctx->error != X509_V_OK
- but returns 1): When the session is reused, we have to set
- ssl->verify_result to the appropriate error code to avoid
- security holes.
- [Bodo Moeller, problem pointed out by Lutz Jaenicke]
- *) Fix a bug in the new PKCS#7 code: it didn't consider the
- case in PKCS7_dataInit() where the signed PKCS7 structure
- didn't contain any existing data because it was being created.
- [Po-Cheng Chen <pocheng@nst.com.tw>, slightly modified by Steve Henson]
- *) Add a salt to the key derivation routines in enc.c. This
- forms the first 8 bytes of the encrypted file. Also add a
- -S option to allow a salt to be input on the command line.
- [Steve Henson]
- *) New function X509_cmp(). Oddly enough there wasn't a function
- to compare two certificates. We do this by working out the SHA1
- hash and comparing that. X509_cmp() will be needed by the trust
- code.
- [Steve Henson]
- *) SSL_get1_session() is like SSL_get_session(), but increments
- the reference count in the SSL_SESSION returned.
- [Geoff Thorpe <geoff@eu.c2.net>]
- *) Fix for 'req': it was adding a null to request attributes.
- Also change the X509_LOOKUP and X509_INFO code to handle
- certificate auxiliary information.
- [Steve Henson]
- *) Add support for 40 and 64 bit RC2 and RC4 algorithms: document
- the 'enc' command.
- [Steve Henson]
- *) Add the possibility to add extra information to the memory leak
- detecting output, to form tracebacks, showing from where each
- allocation was originated: CRYPTO_push_info("constant string") adds
- the string plus current file name and line number to a per-thread
- stack, CRYPTO_pop_info() does the obvious, CRYPTO_remove_all_info()
- is like calling CYRPTO_pop_info() until the stack is empty.
- Also updated memory leak detection code to be multi-thread-safe.
- [Richard Levitte]
- *) Add options -text and -noout to pkcs7 utility and delete the
- encryption options which never did anything. Update docs.
- [Steve Henson]
- *) Add options to some of the utilities to allow the pass phrase
- to be included on either the command line (not recommended on
- OSes like Unix) or read from the environment. Update the
- manpages and fix a few bugs.
- [Steve Henson]
- *) Add a few manpages for some of the openssl commands.
- [Steve Henson]
- *) Fix the -revoke option in ca. It was freeing up memory twice,
- leaking and not finding already revoked certificates.
- [Steve Henson]
- *) Extensive changes to support certificate auxiliary information.
- This involves the use of X509_CERT_AUX structure and X509_AUX
- functions. An X509_AUX function such as PEM_read_X509_AUX()
- can still read in a certificate file in the usual way but it
- will also read in any additional "auxiliary information". By
- doing things this way a fair degree of compatibility can be
- retained: existing certificates can have this information added
- using the new 'x509' options.
- Current auxiliary information includes an "alias" and some trust
- settings. The trust settings will ultimately be used in enhanced
- certificate chain verification routines: currently a certificate
- can only be trusted if it is self signed and then it is trusted
- for all purposes.
- [Steve Henson]
- *) Fix assembler for Alpha (tested only on DEC OSF not Linux or *BSD).
- The problem was that one of the replacement routines had not been working
- since SSLeay releases. For now the offending routine has been replaced
- with non-optimised assembler. Even so, this now gives around 95%
- performance improvement for 1024 bit RSA signs.
- [Mark Cox]
- *) Hack to fix PKCS#7 decryption when used with some unorthodox RC2
- handling. Most clients have the effective key size in bits equal to
- the key length in bits: so a 40 bit RC2 key uses a 40 bit (5 byte) key.
- A few however don't do this and instead use the size of the decrypted key
- to determine the RC2 key length and the AlgorithmIdentifier to determine
- the effective key length. In this case the effective key length can still
- be 40 bits but the key length can be 168 bits for example. This is fixed
- by manually forcing an RC2 key into the EVP_PKEY structure because the
- EVP code can't currently handle unusual RC2 key sizes: it always assumes
- the key length and effective key length are equal.
- [Steve Henson]
- *) Add a bunch of functions that should simplify the creation of
- X509_NAME structures. Now you should be able to do:
- X509_NAME_add_entry_by_txt(nm, "CN", MBSTRING_ASC, "Steve", -1, -1, 0);
- and have it automatically work out the correct field type and fill in
- the structures. The more adventurous can try:
- X509_NAME_add_entry_by_txt(nm, field, MBSTRING_UTF8, str, -1, -1, 0);
- and it will (hopefully) work out the correct multibyte encoding.
- [Steve Henson]
- *) Change the 'req' utility to use the new field handling and multibyte
- copy routines. Before the DN field creation was handled in an ad hoc
- way in req, ca, and x509 which was rather broken and didn't support
- BMPStrings or UTF8Strings. Since some software doesn't implement
- BMPStrings or UTF8Strings yet, they can be enabled using the config file
- using the dirstring_type option. See the new comment in the default
- openssl.cnf for more info.
- [Steve Henson]
- *) Make crypto/rand/md_rand.c more robust:
- - Assure unique random numbers after fork().
- - Make sure that concurrent threads access the global counter and
- md serializably so that we never lose entropy in them
- or use exactly the same state in multiple threads.
- Access to the large state is not always serializable because
- the additional locking could be a performance killer, and
- md should be large enough anyway.
- [Bodo Moeller]
- *) New file apps/app_rand.c with commonly needed functionality
- for handling the random seed file.
- Use the random seed file in some applications that previously did not:
- ca,
- dsaparam -genkey (which also ignored its '-rand' option),
- s_client,
- s_server,
- x509 (when signing).
- Except on systems with /dev/urandom, it is crucial to have a random
- seed file at least for key creation, DSA signing, and for DH exchanges;
- for RSA signatures we could do without one.
- gendh and gendsa (unlike genrsa) used to read only the first byte
- of each file listed in the '-rand' option. The function as previously
- found in genrsa is now in app_rand.c and is used by all programs
- that support '-rand'.
- [Bodo Moeller]
- *) In RAND_write_file, use mode 0600 for creating files;
- don't just chmod when it may be too late.
- [Bodo Moeller]
- *) Report an error from X509_STORE_load_locations
- when X509_LOOKUP_load_file or X509_LOOKUP_add_dir failed.
- [Bill Perry]
- *) New function ASN1_mbstring_copy() this copies a string in either
- ASCII, Unicode, Universal (4 bytes per character) or UTF8 format
- into an ASN1_STRING type. A mask of permissible types is passed
- and it chooses the "minimal" type to use or an error if not type
- is suitable.
- [Steve Henson]
- *) Add function equivalents to the various macros in asn1.h. The old
- macros are retained with an M_ prefix. Code inside the library can
- use the M_ macros. External code (including the openssl utility)
- should *NOT* in order to be "shared library friendly".
- [Steve Henson]
- *) Add various functions that can check a certificate's extensions
- to see if it usable for various purposes such as SSL client,
- server or S/MIME and CAs of these types. This is currently
- VERY EXPERIMENTAL but will ultimately be used for certificate chain
- verification. Also added a -purpose flag to x509 utility to
- print out all the purposes.
- [Steve Henson]
- *) Add a CRYPTO_EX_DATA to X509 certificate structure and associated
- functions.
- [Steve Henson]
- *) New X509V3_{X509,CRL,REVOKED}_get_d2i() functions. These will search
- for, obtain and decode and extension and obtain its critical flag.
- This allows all the necessary extension code to be handled in a
- single function call.
- [Steve Henson]
- *) RC4 tune-up featuring 30-40% performance improvement on most RISC
- platforms. See crypto/rc4/rc4_enc.c for further details.
- [Andy Polyakov]
- *) New -noout option to asn1parse. This causes no output to be produced
- its main use is when combined with -strparse and -out to extract data
- from a file (which may not be in ASN.1 format).
- [Steve Henson]
- *) Fix for pkcs12 program. It was hashing an invalid certificate pointer
- when producing the local key id.
- [Richard Levitte <levitte@stacken.kth.se>]
- *) New option -dhparam in s_server. This allows a DH parameter file to be
- stated explicitly. If it is not stated then it tries the first server
- certificate file. The previous behaviour hard coded the filename
- "server.pem".
- [Steve Henson]
- *) Add -pubin and -pubout options to the rsa and dsa commands. These allow
- a public key to be input or output. For example:
- openssl rsa -in key.pem -pubout -out pubkey.pem
- Also added necessary DSA public key functions to handle this.
- [Steve Henson]
- *) Fix so PKCS7_dataVerify() doesn't crash if no certificates are contained
- in the message. This was handled by allowing
- X509_find_by_issuer_and_serial() to tolerate a NULL passed to it.
- [Steve Henson, reported by Sampo Kellomaki <sampo@mail.neuronio.pt>]
- *) Fix for bug in d2i_ASN1_bytes(): other ASN1 functions add an extra null
- to the end of the strings whereas this didn't. This would cause problems
- if strings read with d2i_ASN1_bytes() were later modified.
- [Steve Henson, reported by Arne Ansper <arne@ats.cyber.ee>]
- *) Fix for base64 decode bug. When a base64 bio reads only one line of
- data and it contains EOF it will end up returning an error. This is
- caused by input 46 bytes long. The cause is due to the way base64
- BIOs find the start of base64 encoded data. They do this by trying a
- trial decode on each line until they find one that works. When they
- do a flag is set and it starts again knowing it can pass all the
- data directly through the decoder. Unfortunately it doesn't reset
- the context it uses. This means that if EOF is reached an attempt
- is made to pass two EOFs through the context and this causes the
- resulting error. This can also cause other problems as well. As is
- usual with these problems it takes *ages* to find and the fix is
- trivial: move one line.
- [Steve Henson, reported by ian@uns.ns.ac.yu (Ivan Nejgebauer) ]
- *) Ugly workaround to get s_client and s_server working under Windows. The
- old code wouldn't work because it needed to select() on sockets and the
- tty (for keypresses and to see if data could be written). Win32 only
- supports select() on sockets so we select() with a 1s timeout on the
- sockets and then see if any characters are waiting to be read, if none
- are present then we retry, we also assume we can always write data to
- the tty. This isn't nice because the code then blocks until we've
- received a complete line of data and it is effectively polling the
- keyboard at 1s intervals: however it's quite a bit better than not
- working at all :-) A dedicated Windows application might handle this
- with an event loop for example.
- [Steve Henson]
- *) Enhance RSA_METHOD structure. Now there are two extra methods, rsa_sign
- and rsa_verify. When the RSA_FLAGS_SIGN_VER option is set these functions
- will be called when RSA_sign() and RSA_verify() are used. This is useful
- if rsa_pub_dec() and rsa_priv_enc() equivalents are not available.
- For this to work properly RSA_public_decrypt() and RSA_private_encrypt()
- should *not* be used: RSA_sign() and RSA_verify() must be used instead.
- This necessitated the support of an extra signature type NID_md5_sha1
- for SSL signatures and modifications to the SSL library to use it instead
- of calling RSA_public_decrypt() and RSA_private_encrypt().
- [Steve Henson]
- *) Add new -verify -CAfile and -CApath options to the crl program, these
- will lookup a CRL issuers certificate and verify the signature in a
- similar way to the verify program. Tidy up the crl program so it
- no longer accesses structures directly. Make the ASN1 CRL parsing a bit
- less strict. It will now permit CRL extensions even if it is not
- a V2 CRL: this will allow it to tolerate some broken CRLs.
- [Steve Henson]
- *) Initialize all non-automatic variables each time one of the openssl
- sub-programs is started (this is necessary as they may be started
- multiple times from the "OpenSSL>" prompt).
- [Lennart Bang, Bodo Moeller]
- *) Preliminary compilation option RSA_NULL which disables RSA crypto without
- removing all other RSA functionality (this is what NO_RSA does). This
- is so (for example) those in the US can disable those operations covered
- by the RSA patent while allowing storage and parsing of RSA keys and RSA
- key generation.
- [Steve Henson]
- *) Non-copying interface to BIO pairs.
- (still largely untested)
- [Bodo Moeller]
- *) New function ANS1_tag2str() to convert an ASN1 tag to a descriptive
- ASCII string. This was handled independently in various places before.
- [Steve Henson]
- *) New functions UTF8_getc() and UTF8_putc() that parse and generate
- UTF8 strings a character at a time.
- [Steve Henson]
- *) Use client_version from client hello to select the protocol
- (s23_srvr.c) and for RSA client key exchange verification
- (s3_srvr.c), as required by the SSL 3.0/TLS 1.0 specifications.
- [Bodo Moeller]
- *) Add various utility functions to handle SPKACs, these were previously
- handled by poking round in the structure internals. Added new function
- NETSCAPE_SPKI_print() to print out SPKAC and a new utility 'spkac' to
- print, verify and generate SPKACs. Based on an original idea from
- Massimiliano Pala <madwolf@comune.modena.it> but extensively modified.
- [Steve Henson]
- *) RIPEMD160 is operational on all platforms and is back in 'make test'.
- [Andy Polyakov]
- *) Allow the config file extension section to be overwritten on the
- command line. Based on an original idea from Massimiliano Pala
- <madwolf@comune.modena.it>. The new option is called -extensions
- and can be applied to ca, req and x509. Also -reqexts to override
- the request extensions in req and -crlexts to override the crl extensions
- in ca.
- [Steve Henson]
- *) Add new feature to the SPKAC handling in ca. Now you can include
- the same field multiple times by preceding it by "XXXX." for example:
- 1.OU="Unit name 1"
- 2.OU="Unit name 2"
- this is the same syntax as used in the req config file.
- [Steve Henson]
- *) Allow certificate extensions to be added to certificate requests. These
- are specified in a 'req_extensions' option of the req section of the
- config file. They can be printed out with the -text option to req but
- are otherwise ignored at present.
- [Steve Henson]
- *) Fix a horrible bug in enc_read() in crypto/evp/bio_enc.c: if the first
- data read consists of only the final block it would not decrypted because
- EVP_CipherUpdate() would correctly report zero bytes had been decrypted.
- A misplaced 'break' also meant the decrypted final block might not be
- copied until the next read.
- [Steve Henson]
- *) Initial support for DH_METHOD. Again based on RSA_METHOD. Also added
- a few extra parameters to the DH structure: these will be useful if
- for example we want the value of 'q' or implement X9.42 DH.
- [Steve Henson]
- *) Initial support for DSA_METHOD. This is based on the RSA_METHOD and
- provides hooks that allow the default DSA functions or functions on a
- "per key" basis to be replaced. This allows hardware acceleration and
- hardware key storage to be handled without major modification to the
- library. Also added low level modexp hooks and CRYPTO_EX structure and
- associated functions.
- [Steve Henson]
- *) Add a new flag to memory BIOs, BIO_FLAG_MEM_RDONLY. This marks the BIO
- as "read only": it can't be written to and the buffer it points to will
- not be freed. Reading from a read only BIO is much more efficient than
- a normal memory BIO. This was added because there are several times when
- an area of memory needs to be read from a BIO. The previous method was
- to create a memory BIO and write the data to it, this results in two
- copies of the data and an O(n^2) reading algorithm. There is a new
- function BIO_new_mem_buf() which creates a read only memory BIO from
- an area of memory. Also modified the PKCS#7 routines to use read only
- memory BIOs.
- [Steve Henson]
- *) Bugfix: ssl23_get_client_hello did not work properly when called in
- state SSL23_ST_SR_CLNT_HELLO_B, i.e. when the first 7 bytes of
- a SSLv2-compatible client hello for SSLv3 or TLSv1 could be read,
- but a retry condition occured while trying to read the rest.
- [Bodo Moeller]
- *) The PKCS7_ENC_CONTENT_new() function was setting the content type as
- NID_pkcs7_encrypted by default: this was wrong since this should almost
- always be NID_pkcs7_data. Also modified the PKCS7_set_type() to handle
- the encrypted data type: this is a more sensible place to put it and it
- allows the PKCS#12 code to be tidied up that duplicated this
- functionality.
- [Steve Henson]
- *) Changed obj_dat.pl script so it takes its input and output files on
- the command line. This should avoid shell escape redirection problems
- under Win32.
- [Steve Henson]
- *) Initial support for certificate extension requests, these are included
- in things like Xenroll certificate requests. Included functions to allow
- extensions to be obtained and added.
- [Steve Henson]
- *) -crlf option to s_client and s_server for sending newlines as
- CRLF (as required by many protocols).
- [Bodo Moeller]
- Changes between 0.9.3a and 0.9.4 [09 Aug 1999]
-
- *) Install libRSAglue.a when OpenSSL is built with RSAref.
- [Ralf S. Engelschall]
- *) A few more ``#ifndef NO_FP_API / #endif'' pairs for consistency.
- [Andrija Antonijevic <TheAntony2@bigfoot.com>]
- *) Fix -startdate and -enddate (which was missing) arguments to 'ca'
- program.
- [Steve Henson]
- *) New function DSA_dup_DH, which duplicates DSA parameters/keys as
- DH parameters/keys (q is lost during that conversion, but the resulting
- DH parameters contain its length).
- For 1024-bit p, DSA_generate_parameters followed by DSA_dup_DH is
- much faster than DH_generate_parameters (which creates parameters
- where p = 2*q + 1), and also the smaller q makes DH computations
- much more efficient (160-bit exponentiation instead of 1024-bit
- exponentiation); so this provides a convenient way to support DHE
- ciphersuites in SSL/TLS servers (see ssl/ssltest.c). It is of
- utter importance to use
- SSL_CTX_set_options(s_ctx, SSL_OP_SINGLE_DH_USE);
- or
- SSL_set_options(s_ctx, SSL_OP_SINGLE_DH_USE);
- when such DH parameters are used, because otherwise small subgroup
- attacks may become possible!
- [Bodo Moeller]
- *) Avoid memory leak in i2d_DHparams.
- [Bodo Moeller]
- *) Allow the -k option to be used more than once in the enc program:
- this allows the same encrypted message to be read by multiple recipients.
- [Steve Henson]
- *) New function OBJ_obj2txt(buf, buf_len, a, no_name), this converts
- an ASN1_OBJECT to a text string. If the "no_name" parameter is set then
- it will always use the numerical form of the OID, even if it has a short
- or long name.
- [Steve Henson]
- *) Added an extra RSA flag: RSA_FLAG_EXT_PKEY. Previously the rsa_mod_exp
- method only got called if p,q,dmp1,dmq1,iqmp components were present,
- otherwise bn_mod_exp was called. In the case of hardware keys for example
- no private key components need be present and it might store extra data
- in the RSA structure, which cannot be accessed from bn_mod_exp.
- By setting RSA_FLAG_EXT_PKEY rsa_mod_exp will always be called for
- private key operations.
- [Steve Henson]
- *) Added support for SPARC Linux.
- [Andy Polyakov]
- *) pem_password_cb function type incompatibly changed from
- typedef int pem_password_cb(char *buf, int size, int rwflag);
- to
- ....(char *buf, int size, int rwflag, void *userdata);
- so that applications can pass data to their callbacks:
- The PEM[_ASN1]_{read,write}... functions and macros now take an
- additional void * argument, which is just handed through whenever
- the password callback is called.
- [Damien Miller <dmiller@ilogic.com.au>; tiny changes by Bodo Moeller]
- New function SSL_CTX_set_default_passwd_cb_userdata.
- Compatibility note: As many C implementations push function arguments
- onto the stack in reverse order, the new library version is likely to
- interoperate with programs that have been compiled with the old
- pem_password_cb definition (PEM_whatever takes some data that
- happens to be on the stack as its last argument, and the callback
- just ignores this garbage); but there is no guarantee whatsoever that
- this will work.
- *) The -DPLATFORM="\"$(PLATFORM)\"" definition and the similar -DCFLAGS=...
- (both in crypto/Makefile.ssl for use by crypto/cversion.c) caused
- problems not only on Windows, but also on some Unix platforms.
- To avoid problematic command lines, these definitions are now in an
- auto-generated file crypto/buildinf.h (created by crypto/Makefile.ssl
- for standard "make" builds, by util/mk1mf.pl for "mk1mf" builds).
- [Bodo Moeller]
- *) MIPS III/IV assembler module is reimplemented.
- [Andy Polyakov]
- *) More DES library cleanups: remove references to srand/rand and
- delete an unused file.
- [Ulf Möller]
- *) Add support for the the free Netwide assembler (NASM) under Win32,
- since not many people have MASM (ml) and it can be hard to obtain.
- This is currently experimental but it seems to work OK and pass all
- the tests. Check out INSTALL.W32 for info.
- [Steve Henson]
- *) Fix memory leaks in s3_clnt.c: All non-anonymous SSL3/TLS1 connections
- without temporary keys kept an extra copy of the server key,
- and connections with temporary keys did not free everything in case
- of an error.
- [Bodo Moeller]
- *) New function RSA_check_key and new openssl rsa option -check
- for verifying the consistency of RSA keys.
- [Ulf Moeller, Bodo Moeller]
- *) Various changes to make Win32 compile work:
- 1. Casts to avoid "loss of data" warnings in p5_crpt2.c
- 2. Change unsigned int to int in b_dump.c to avoid "signed/unsigned
- comparison" warnings.
- 3. Add sk_<TYPE>_sort to DEF file generator and do make update.
- [Steve Henson]
- *) Add a debugging option to PKCS#5 v2 key generation function: when
- you #define DEBUG_PKCS5V2 passwords, salts, iteration counts and
- derived keys are printed to stderr.
- [Steve Henson]
- *) Copy the flags in ASN1_STRING_dup().
- [Roman E. Pavlov <pre@mo.msk.ru>]
- *) The x509 application mishandled signing requests containing DSA
- keys when the signing key was also DSA and the parameters didn't match.
- It was supposed to omit the parameters when they matched the signing key:
- the verifying software was then supposed to automatically use the CA's
- parameters if they were absent from the end user certificate.
- Omitting parameters is no longer recommended. The test was also
- the wrong way round! This was probably due to unusual behaviour in
- EVP_cmp_parameters() which returns 1 if the parameters match.
- This meant that parameters were omitted when they *didn't* match and
- the certificate was useless. Certificates signed with 'ca' didn't have
- this bug.
- [Steve Henson, reported by Doug Erickson <Doug.Erickson@Part.NET>]
- *) Memory leak checking (-DCRYPTO_MDEBUG) had some problems.
- The interface is as follows:
- Applications can use
- CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ON) aka MemCheck_start(),
- CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_OFF) aka MemCheck_stop();
- "off" is now the default.
- The library internally uses
- CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_DISABLE) aka MemCheck_off(),
- CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ENABLE) aka MemCheck_on()
- to disable memory-checking temporarily.
- Some inconsistent states that previously were possible (and were
- even the default) are now avoided.
- -DCRYPTO_MDEBUG_TIME is new and additionally stores the current time
- with each memory chunk allocated; this is occasionally more helpful
- than just having a counter.
- -DCRYPTO_MDEBUG_THREAD is also new and adds the thread ID.
- -DCRYPTO_MDEBUG_ALL enables all of the above, plus any future
- extensions.
- [Bodo Moeller]
- *) Introduce "mode" for SSL structures (with defaults in SSL_CTX),
- which largely parallels "options", but is for changing API behaviour,
- whereas "options" are about protocol behaviour.
- Initial "mode" flags are:
- SSL_MODE_ENABLE_PARTIAL_WRITE Allow SSL_write to report success when
- a single record has been written.
- SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER Don't insist that SSL_write
- retries use the same buffer location.
- (But all of the contents must be
- copied!)
- [Bodo Moeller]
- *) Bugfix: SSL_set_options ignored its parameter, only SSL_CTX_set_options
- worked.
- *) Fix problems with no-hmac etc.
- [Ulf Möller, pointed out by Brian Wellington <bwelling@tislabs.com>]
- *) New functions RSA_get_default_method(), RSA_set_method() and
- RSA_get_method(). These allows replacement of RSA_METHODs without having
- to mess around with the internals of an RSA structure.
- [Steve Henson]
- *) Fix memory leaks in DSA_do_sign and DSA_is_prime.
- Also really enable memory leak checks in openssl.c and in some
- test programs.
- [Chad C. Mulligan, Bodo Moeller]
- *) Fix a bug in d2i_ASN1_INTEGER() and i2d_ASN1_INTEGER() which can mess
- up the length of negative integers. This has now been simplified to just
- store the length when it is first determined and use it later, rather
- than trying to keep track of where data is copied and updating it to
- point to the end.
- [Steve Henson, reported by Brien Wheeler
- <bwheeler@authentica-security.com>]
- *) Add a new function PKCS7_signatureVerify. This allows the verification
- of a PKCS#7 signature but with the signing certificate passed to the
- function itself. This contrasts with PKCS7_dataVerify which assumes the
- certificate is present in the PKCS#7 structure. This isn't always the
- case: certificates can be omitted from a PKCS#7 structure and be
- distributed by "out of band" means (such as a certificate database).
- [Steve Henson]
- *) Complete the PEM_* macros with DECLARE_PEM versions to replace the
- function prototypes in pem.h, also change util/mkdef.pl to add the
- necessary function names.
- [Steve Henson]
- *) mk1mf.pl (used by Windows builds) did not properly read the
- options set by Configure in the top level Makefile, and Configure
- was not even able to write more than one option correctly.
- Fixed, now "no-idea no-rc5 -DCRYPTO_MDEBUG" etc. works as intended.
- [Bodo Moeller]
- *) New functions CONF_load_bio() and CONF_load_fp() to allow a config
- file to be loaded from a BIO or FILE pointer. The BIO version will
- for example allow memory BIOs to contain config info.
- [Steve Henson]
- *) New function "CRYPTO_num_locks" that returns CRYPTO_NUM_LOCKS.
- Whoever hopes to achieve shared-library compatibility across versions
- must use this, not the compile-time macro.
- (Exercise 0.9.4: Which is the minimum library version required by
- such programs?)
- Note: All this applies only to multi-threaded programs, others don't
- need locks.
- [Bodo Moeller]
- *) Add missing case to s3_clnt.c state machine -- one of the new SSL tests
- through a BIO pair triggered the default case, i.e.
- SSLerr(...,SSL_R_UNKNOWN_STATE).
- [Bodo Moeller]
- *) New "BIO pair" concept (crypto/bio/bss_bio.c) so that applications
- can use the SSL library even if none of the specific BIOs is
- appropriate.
- [Bodo Moeller]
- *) Fix a bug in i2d_DSAPublicKey() which meant it returned the wrong value
- for the encoded length.
- [Jeon KyoungHo <khjeon@sds.samsung.co.kr>]
- *) Add initial documentation of the X509V3 functions.
- [Steve Henson]
- *) Add a new pair of functions PEM_write_PKCS8PrivateKey() and
- PEM_write_bio_PKCS8PrivateKey() that are equivalent to
- PEM_write_PrivateKey() and PEM_write_bio_PrivateKey() but use the more
- secure PKCS#8 private key format with a high iteration count.
- [Steve Henson]
- *) Fix determination of Perl interpreter: A perl or perl5
- _directory_ in $PATH was also accepted as the interpreter.
- [Ralf S. Engelschall]
- *) Fix demos/sign/sign.c: well there wasn't anything strictly speaking
- wrong with it but it was very old and did things like calling
- PEM_ASN1_read() directly and used MD5 for the hash not to mention some
- unusual formatting.
- [Steve Henson]
- *) Fix demos/selfsign.c: it used obsolete and deleted functions, changed
- to use the new extension code.
- [Steve Henson]
- *) Implement the PEM_read/PEM_write functions in crypto/pem/pem_all.c
- with macros. This should make it easier to change their form, add extra
- arguments etc. Fix a few PEM prototypes which didn't have cipher as a
- constant.
- [Steve Henson]
- *) Add to configuration table a new entry that can specify an alternative
- name for unistd.h (for pre-POSIX systems); we need this for NeXTstep,
- according to Mark Crispin <MRC@Panda.COM>.
- [Bodo Moeller]
- #if 0
- *) DES CBC did not update the IV. Weird.
- [Ben Laurie]
- #else
- des_cbc_encrypt does not update the IV, but des_ncbc_encrypt does.
- Changing the behaviour of the former might break existing programs --
- where IV updating is needed, des_ncbc_encrypt can be used.
- #endif
- *) When bntest is run from "make test" it drives bc to check its
- calculations, as well as internally checking them. If an internal check
- fails, it needs to cause bc to give a non-zero result or make test carries
- on without noticing the failure. Fixed.
- [Ben Laurie]
- *) DES library cleanups.
- [Ulf Möller]
- *) Add support for PKCS#5 v2.0 PBE algorithms. This will permit PKCS#8 to be
- used with any cipher unlike PKCS#5 v1.5 which can at most handle 64 bit
- ciphers. NOTE: although the key derivation function has been verified
- against some published test vectors it has not been extensively tested
- yet. Added a -v2 "cipher" option to pkcs8 application to allow the use
- of v2.0.
- [Steve Henson]
- *) Instead of "mkdir -p", which is not fully portable, use new
- Perl script "util/mkdir-p.pl".
- [Bodo Moeller]
- *) Rewrite the way password based encryption (PBE) is handled. It used to
- assume that the ASN1 AlgorithmIdentifier parameter was a PBEParameter
- structure. This was true for the PKCS#5 v1.5 and PKCS#12 PBE algorithms
- but doesn't apply to PKCS#5 v2.0 where it can be something else. Now
- the 'parameter' field of the AlgorithmIdentifier is passed to the
- underlying key generation function so it must do its own ASN1 parsing.
- This has also changed the EVP_PBE_CipherInit() function which now has a
- 'parameter' argument instead of literal salt and iteration count values
- and the function EVP_PBE_ALGOR_CipherInit() has been deleted.
- [Steve Henson]
- *) Support for PKCS#5 v1.5 compatible password based encryption algorithms
- and PKCS#8 functionality. New 'pkcs8' application linked to openssl.
- Needed to change the PEM_STRING_EVP_PKEY value which was just "PRIVATE
- KEY" because this clashed with PKCS#8 unencrypted string. Since this
- value was just used as a "magic string" and not used directly its
- value doesn't matter.
- [Steve Henson]
- *) Introduce some semblance of const correctness to BN. Shame C doesn't
- support mutable.
- [Ben Laurie]
- *) "linux-sparc64" configuration (ultrapenguin).
- [Ray Miller <ray.miller@oucs.ox.ac.uk>]
- "linux-sparc" configuration.
- [Christian Forster <fo@hawo.stw.uni-erlangen.de>]
- *) config now generates no-xxx options for missing ciphers.
- [Ulf Möller]
- *) Support the EBCDIC character set (work in progress).
- File ebcdic.c not yet included because it has a different license.
- [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
- *) Support BS2000/OSD-POSIX.
- [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
- *) Make callbacks for key generation use void * instead of char *.
- [Ben Laurie]
- *) Make S/MIME samples compile (not yet tested).
- [Ben Laurie]
- *) Additional typesafe stacks.
- [Ben Laurie]
- *) New configuration variants "bsdi-elf-gcc" (BSD/OS 4.x).
- [Bodo Moeller]
- Changes between 0.9.3 and 0.9.3a [29 May 1999]
- *) New configuration variant "sco5-gcc".
- *) Updated some demos.
- [Sean O Riordain, Wade Scholine]
- *) Add missing BIO_free at exit of pkcs12 application.
- [Wu Zhigang]
- *) Fix memory leak in conf.c.
- [Steve Henson]
- *) Updates for Win32 to assembler version of MD5.
- [Steve Henson]
- *) Set #! path to perl in apps/der_chop to where we found it
- instead of using a fixed path.
- [Bodo Moeller]
- *) SHA library changes for irix64-mips4-cc.
- [Andy Polyakov]
- *) Improvements for VMS support.
- [Richard Levitte]
- Changes between 0.9.2b and 0.9.3 [24 May 1999]
- *) Bignum library bug fix. IRIX 6 passes "make test" now!
- This also avoids the problems with SC4.2 and unpatched SC5.
- [Andy Polyakov <appro@fy.chalmers.se>]
- *) New functions sk_num, sk_value and sk_set to replace the previous macros.
- These are required because of the typesafe stack would otherwise break
- existing code. If old code used a structure member which used to be STACK
- and is now STACK_OF (for example cert in a PKCS7_SIGNED structure) with
- sk_num or sk_value it would produce an error because the num, data members
- are not present in STACK_OF. Now it just produces a warning. sk_set
- replaces the old method of assigning a value to sk_value
- (e.g. sk_value(x, i) = y) which the library used in a few cases. Any code
- that does this will no longer work (and should use sk_set instead) but
- this could be regarded as a "questionable" behaviour anyway.
- [Steve Henson]
- *) Fix most of the other PKCS#7 bugs. The "experimental" code can now
- correctly handle encrypted S/MIME data.
- [Steve Henson]
- *) Change type of various DES function arguments from des_cblock
- (which means, in function argument declarations, pointer to char)
- to des_cblock * (meaning pointer to array with 8 char elements),
- which allows the compiler to do more typechecking; it was like
- that back in SSLeay, but with lots of ugly casts.
- Introduce new type const_des_cblock.
- [Bodo Moeller]
- *) Reorganise the PKCS#7 library and get rid of some of the more obvious
- problems: find RecipientInfo structure that matches recipient certificate
- and initialise the ASN1 structures properly based on passed cipher.
- [Steve Henson]
- *) Belatedly make the BN tests actually check the results.
- [Ben Laurie]
- *) Fix the encoding and decoding of negative ASN1 INTEGERS and conversion
- to and from BNs: it was completely broken. New compilation option
- NEG_PUBKEY_BUG to allow for some broken certificates that encode public
- key elements as negative integers.
- [Steve Henson]
- *) Reorganize and speed up MD5.
- [Andy Polyakov <appro@fy.chalmers.se>]
- *) VMS support.
- [Richard Levitte <richard@levitte.org>]
- *) New option -out to asn1parse to allow the parsed structure to be
- output to a file. This is most useful when combined with the -strparse
- option to examine the output of things like OCTET STRINGS.
- [Steve Henson]
- *) Make SSL library a little more fool-proof by not requiring any longer
- that SSL_set_{accept,connect}_state be called before
- SSL_{accept,connect} may be used (SSL_set_..._state is omitted
- in many applications because usually everything *appeared* to work as
- intended anyway -- now it really works as intended).
- [Bodo Moeller]
- *) Move openssl.cnf out of lib/.
- [Ulf Möller]
- *) Fix various things to let OpenSSL even pass ``egcc -pipe -O2 -Wall
- -Wshadow -Wpointer-arith -Wcast-align -Wmissing-prototypes
- -Wmissing-declarations -Wnested-externs -Winline'' with EGCS 1.1.2+
- [Ralf S. Engelschall]
- *) Various fixes to the EVP and PKCS#7 code. It may now be able to
- handle PKCS#7 enveloped data properly.
- [Sebastian Akerman <sak@parallelconsulting.com>, modified by Steve]
- *) Create a duplicate of the SSL_CTX's CERT in SSL_new instead of
- copying pointers. The cert_st handling is changed by this in
- various ways (and thus what used to be known as ctx->default_cert
- is now called ctx->cert, since we don't resort to s->ctx->[default_]cert
- any longer when s->cert does not give us what we need).
- ssl_cert_instantiate becomes obsolete by this change.
- As soon as we've got the new code right (possibly it already is?),
- we have solved a couple of bugs of the earlier code where s->cert
- was used as if it could not have been shared with other SSL structures.
- Note that using the SSL API in certain dirty ways now will result
- in different behaviour than observed with earlier library versions:
- Changing settings for an SSL_CTX *ctx after having done s = SSL_new(ctx)
- does not influence s as it used to.
-
- In order to clean up things more thoroughly, inside SSL_SESSION
- we don't use CERT any longer, but a new structure SESS_CERT
- that holds per-session data (if available); currently, this is
- the peer's certificate chain and, for clients, the server's certificate
- and temporary key. CERT holds only those values that can have
- meaningful defaults in an SSL_CTX.
- [Bodo Moeller]
- *) New function X509V3_EXT_i2d() to create an X509_EXTENSION structure
- from the internal representation. Various PKCS#7 fixes: remove some
- evil casts and set the enc_dig_alg field properly based on the signing
- key type.
- [Steve Henson]
- *) Allow PKCS#12 password to be set from the command line or the
- environment. Let 'ca' get its config file name from the environment
- variables "OPENSSL_CONF" or "SSLEAY_CONF" (for consistency with 'req'
- and 'x509').
- [Steve Henson]
- *) Allow certificate policies extension to use an IA5STRING for the
- organization field. This is contrary to the PKIX definition but
- VeriSign uses it and IE5 only recognises this form. Document 'x509'
- extension option.
- [Steve Henson]
- *) Add PEDANTIC compiler flag to allow compilation with gcc -pedantic,
- without disallowing inline assembler and the like for non-pedantic builds.
- [Ben Laurie]
- *) Support Borland C++ builder.
- [Janez Jere <jj@void.si>, modified by Ulf Möller]
- *) Support Mingw32.
- [Ulf Möller]
- *) SHA-1 cleanups and performance enhancements.
- [Andy Polyakov <appro@fy.chalmers.se>]
- *) Sparc v8plus assembler for the bignum library.
- [Andy Polyakov <appro@fy.chalmers.se>]
- *) Accept any -xxx and +xxx compiler options in Configure.
- [Ulf Möller]
- *) Update HPUX configuration.
- [Anonymous]
-
- *) Add missing sk_<type>_unshift() function to safestack.h
- [Ralf S. Engelschall]
- *) New function SSL_CTX_use_certificate_chain_file that sets the
- "extra_cert"s in addition to the certificate. (This makes sense
- only for "PEM" format files, as chains as a whole are not
- DER-encoded.)
- [Bodo Moeller]
- *) Support verify_depth from the SSL API.
- x509_vfy.c had what can be considered an off-by-one-error:
- Its depth (which was not part of the external interface)
- was actually counting the number of certificates in a chain;
- now it really counts the depth.
- [Bodo Moeller]
- *) Bugfix in crypto/x509/x509_cmp.c: The SSLerr macro was used
- instead of X509err, which often resulted in confusing error
- messages since the error codes are not globally unique
- (e.g. an alleged error in ssl3_accept when a certificate
- didn't match the private key).
- *) New function SSL_CTX_set_session_id_context that allows to set a default
- value (so that you don't need SSL_set_session_id_context for each
- connection using the SSL_CTX).
- [Bodo Moeller]
- *) OAEP decoding bug fix.
- [Ulf Möller]
- *) Support INSTALL_PREFIX for package builders, as proposed by
- David Harris.
- [Bodo Moeller]
- *) New Configure options "threads" and "no-threads". For systems
- where the proper compiler options are known (currently Solaris
- and Linux), "threads" is the default.
- [Bodo Moeller]
- *) New script util/mklink.pl as a faster substitute for util/mklink.sh.
- [Bodo Moeller]
- *) Install various scripts to $(OPENSSLDIR)/misc, not to
- $(INSTALLTOP)/bin -- they shouldn't clutter directories
- such as /usr/local/bin.
- [Bodo Moeller]
- *) "make linux-shared" to build shared libraries.
- [Niels Poppe <niels@netbox.org>]
- *) New Configure option no-<cipher> (rsa, idea, rc5, ...).
- [Ulf Möller]
- *) Add the PKCS#12 API documentation to openssl.txt. Preliminary support for
- extension adding in x509 utility.
- [Steve Henson]
- *) Remove NOPROTO sections and error code comments.
- [Ulf Möller]
- *) Partial rewrite of the DEF file generator to now parse the ANSI
- prototypes.
- [Steve Henson]
- *) New Configure options --prefix=DIR and --openssldir=DIR.
- [Ulf Möller]
- *) Complete rewrite of the error code script(s). It is all now handled
- by one script at the top level which handles error code gathering,
- header rewriting and C source file generation. It should be much better
- than the old method: it now uses a modified version of Ulf's parser to
- read the ANSI prototypes in all header files (thus the old K&R definitions
- aren't needed for error creation any more) and do a better job of
- translating function codes into names. The old 'ASN1 error code imbedded
- in a comment' is no longer necessary and it doesn't use .err files which
- have now been deleted. Also the error code call doesn't have to appear all
- on one line (which resulted in some large lines...).
- [Steve Henson]
- *) Change #include filenames from <foo.h> to <openssl/foo.h>.
- [Bodo Moeller]
- *) Change behaviour of ssl2_read when facing length-0 packets: Don't return
- 0 (which usually indicates a closed connection), but continue reading.
- [Bodo Moeller]
- *) Fix some race conditions.
- [Bodo Moeller]
- *) Add support for CRL distribution points extension. Add Certificate
- Policies and CRL distribution points documentation.
- [Steve Henson]
- *) Move the autogenerated header file parts to crypto/opensslconf.h.
- [Ulf Möller]
- *) Fix new 56-bit DES export ciphersuites: they were using 7 bytes instead of
- 8 of keying material. Merlin has also confirmed interop with this fix
- between OpenSSL and Baltimore C/SSL 2.0 and J/SSL 2.0.
- [Merlin Hughes <merlin@baltimore.ie>]
- *) Fix lots of warnings.
- [Richard Levitte <levitte@stacken.kth.se>]
-
- *) In add_cert_dir() in crypto/x509/by_dir.c, break out of the loop if
- the directory spec didn't end with a LIST_SEPARATOR_CHAR.
- [Richard Levitte <levitte@stacken.kth.se>]
-
- *) Fix problems with sizeof(long) == 8.
- [Andy Polyakov <appro@fy.chalmers.se>]
- *) Change functions to ANSI C.
- [Ulf Möller]
- *) Fix typos in error codes.
- [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>, Ulf Möller]
- *) Remove defunct assembler files from Configure.
- [Ulf Möller]
- *) SPARC v8 assembler BIGNUM implementation.
- [Andy Polyakov <appro@fy.chalmers.se>]
- *) Support for Certificate Policies extension: both print and set.
- Various additions to support the r2i method this uses.
- [Steve Henson]
- *) A lot of constification, and fix a bug in X509_NAME_oneline() that could
- return a const string when you are expecting an allocated buffer.
- [Ben Laurie]
- *) Add support for ASN1 types UTF8String and VISIBLESTRING, also the CHOICE
- types DirectoryString and DisplayText.
- [Steve Henson]
- *) Add code to allow r2i extensions to access the configuration database,
- add an LHASH database driver and add several ctx helper functions.
- [Steve Henson]
- *) Fix an evil bug in bn_expand2() which caused various BN functions to
- fail when they extended the size of a BIGNUM.
- [Steve Henson]
- *) Various utility functions to handle SXNet extension. Modify mkdef.pl to
- support typesafe stack.
- [Steve Henson]
- *) Fix typo in SSL_[gs]et_options().
- [Nils Frostberg <nils@medcom.se>]
- *) Delete various functions and files that belonged to the (now obsolete)
- old X509V3 handling code.
- [Steve Henson]
- *) New Configure option "rsaref".
- [Ulf Möller]
- *) Don't auto-generate pem.h.
- [Bodo Moeller]
- *) Introduce type-safe ASN.1 SETs.
- [Ben Laurie]
- *) Convert various additional casted stacks to type-safe STACK_OF() variants.
- [Ben Laurie, Ralf S. Engelschall, Steve Henson]
- *) Introduce type-safe STACKs. This will almost certainly break lots of code
- that links with OpenSSL (well at least cause lots of warnings), but fear
- not: the conversion is trivial, and it eliminates loads of evil casts. A
- few STACKed things have been converted already. Feel free to convert more.
- In the fullness of time, I'll do away with the STACK type altogether.
- [Ben Laurie]
- *) Add `openssl ca -revoke <certfile>' facility which revokes a certificate
- specified in <certfile> by updating the entry in the index.txt file.
- This way one no longer has to edit the index.txt file manually for
- revoking a certificate. The -revoke option does the gory details now.
- [Massimiliano Pala <madwolf@openca.org>, Ralf S. Engelschall]
- *) Fix `openssl crl -noout -text' combination where `-noout' killed the
- `-text' option at all and this way the `-noout -text' combination was
- inconsistent in `openssl crl' with the friends in `openssl x509|rsa|dsa'.
- [Ralf S. Engelschall]
- *) Make sure a corresponding plain text error message exists for the
- X509_V_ERR_CERT_REVOKED/23 error number which can occur when a
- verify callback function determined that a certificate was revoked.
- [Ralf S. Engelschall]
- *) Bugfix: In test/testenc, don't test "openssl <cipher>" for
- ciphers that were excluded, e.g. by -DNO_IDEA. Also, test
- all available cipers including rc5, which was forgotten until now.
- In order to let the testing shell script know which algorithms
- are available, a new (up to now undocumented) command
- "openssl list-cipher-commands" is used.
- [Bodo Moeller]
- *) Bugfix: s_client occasionally would sleep in select() when
- it should have checked SSL_pending() first.
- [Bodo Moeller]
- *) New functions DSA_do_sign and DSA_do_verify to provide access to
- the raw DSA values prior to ASN.1 encoding.
- [Ulf Möller]
- *) Tweaks to Configure
- [Niels Poppe <niels@netbox.org>]
- *) Add support for PKCS#5 v2.0 ASN1 PBES2 structures. No other support,
- yet...
- [Steve Henson]
- *) New variables $(RANLIB) and $(PERL) in the Makefiles.
- [Ulf Möller]
- *) New config option to avoid instructions that are illegal on the 80386.
- The default code is faster, but requires at least a 486.
- [Ulf Möller]
-
- *) Got rid of old SSL2_CLIENT_VERSION (inconsistently used) and
- SSL2_SERVER_VERSION (not used at all) macros, which are now the
- same as SSL2_VERSION anyway.
- [Bodo Moeller]
- *) New "-showcerts" option for s_client.
- [Bodo Moeller]
- *) Still more PKCS#12 integration. Add pkcs12 application to openssl
- application. Various cleanups and fixes.
- [Steve Henson]
- *) More PKCS#12 integration. Add new pkcs12 directory with Makefile.ssl and
- modify error routines to work internally. Add error codes and PBE init
- to library startup routines.
- [Steve Henson]
- *) Further PKCS#12 integration. Added password based encryption, PKCS#8 and
- packing functions to asn1 and evp. Changed function names and error
- codes along the way.
- [Steve Henson]
- *) PKCS12 integration: and so it begins... First of several patches to
- slowly integrate PKCS#12 functionality into OpenSSL. Add PKCS#12
- objects to objects.h
- [Steve Henson]
- *) Add a new 'indent' option to some X509V3 extension code. Initial ASN1
- and display support for Thawte strong extranet extension.
- [Steve Henson]
- *) Add LinuxPPC support.
- [Jeff Dubrule <igor@pobox.org>]
- *) Get rid of redundant BN file bn_mulw.c, and rename bn_div64 to
- bn_div_words in alpha.s.
- [Hannes Reinecke <H.Reinecke@hw.ac.uk> and Ben Laurie]
- *) Make sure the RSA OAEP test is skipped under -DRSAref because
- OAEP isn't supported when OpenSSL is built with RSAref.
- [Ulf Moeller <ulf@fitug.de>]
- *) Move definitions of IS_SET/IS_SEQUENCE inside crypto/asn1/asn1.h
- so they no longer are missing under -DNOPROTO.
- [Soren S. Jorvang <soren@t.dk>]
- Changes between 0.9.1c and 0.9.2b [22 Mar 1999]
- *) Make SSL_get_peer_cert_chain() work in servers. Unfortunately, it still
- doesn't work when the session is reused. Coming soon!
- [Ben Laurie]
- *) Fix a security hole, that allows sessions to be reused in the wrong
- context thus bypassing client cert protection! All software that uses
- client certs and session caches in multiple contexts NEEDS PATCHING to
- allow session reuse! A fuller solution is in the works.
- [Ben Laurie, problem pointed out by Holger Reif, Bodo Moeller (and ???)]
- *) Some more source tree cleanups (removed obsolete files
- crypto/bf/asm/bf586.pl, test/test.txt and crypto/sha/asm/f.s; changed
- permission on "config" script to be executable) and a fix for the INSTALL
- document.
- [Ulf Moeller <ulf@fitug.de>]
- *) Remove some legacy and erroneous uses of malloc, free instead of
- Malloc, Free.
- [Lennart Bang <lob@netstream.se>, with minor changes by Steve]
- *) Make rsa_oaep_test return non-zero on error.
- [Ulf Moeller <ulf@fitug.de>]
- *) Add support for native Solaris shared libraries. Configure
- solaris-sparc-sc4-pic, make, then run shlib/solaris-sc4.sh. It'd be nice
- if someone would make that last step automatic.
- [Matthias Loepfe <Matthias.Loepfe@AdNovum.CH>]
- *) ctx_size was not built with the right compiler during "make links". Fixed.
- [Ben Laurie]
- *) Change the meaning of 'ALL' in the cipher list. It now means "everything
- except NULL ciphers". This means the default cipher list will no longer
- enable NULL ciphers. They need to be specifically enabled e.g. with
- the string "DEFAULT:eNULL".
- [Steve Henson]
- *) Fix to RSA private encryption routines: if p < q then it would
- occasionally produce an invalid result. This will only happen with
- externally generated keys because OpenSSL (and SSLeay) ensure p > q.
- [Steve Henson]
- *) Be less restrictive and allow also `perl util/perlpath.pl
- /path/to/bin/perl' in addition to `perl util/perlpath.pl /path/to/bin',
- because this way one can also use an interpreter named `perl5' (which is
- usually the name of Perl 5.xxx on platforms where an Perl 4.x is still
- installed as `perl').
- [Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
- *) Let util/clean-depend.pl work also with older Perl 5.00x versions.
- [Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
- *) Fix Makefile.org so CC,CFLAG etc are passed to 'make links' add
- advapi32.lib to Win32 build and change the pem test comparision
- to fc.exe (thanks to Ulrich Kroener <kroneru@yahoo.com> for the
- suggestion). Fix misplaced ASNI prototypes and declarations in evp.h
- and crypto/des/ede_cbcm_enc.c.
- [Steve Henson]
- *) DES quad checksum was broken on big-endian architectures. Fixed.
- [Ben Laurie]
- *) Comment out two functions in bio.h that aren't implemented. Fix up the
- Win32 test batch file so it (might) work again. The Win32 test batch file
- is horrible: I feel ill....
- [Steve Henson]
- *) Move various #ifdefs around so NO_SYSLOG, NO_DIRENT etc are now selected
- in e_os.h. Audit of header files to check ANSI and non ANSI
- sections: 10 functions were absent from non ANSI section and not exported
- from Windows DLLs. Fixed up libeay.num for new functions.
- [Steve Henson]
- *) Make `openssl version' output lines consistent.
- [Ralf S. Engelschall]
- *) Fix Win32 symbol export lists for BIO functions: Added
- BIO_get_ex_new_index, BIO_get_ex_num, BIO_get_ex_data and BIO_set_ex_data
- to ms/libeay{16,32}.def.
- [Ralf S. Engelschall]
- *) Second round of fixing the OpenSSL perl/ stuff. It now at least compiled
- fine under Unix and passes some trivial tests I've now added. But the
- whole stuff is horribly incomplete, so a README.1ST with a disclaimer was
- added to make sure no one expects that this stuff really works in the
- OpenSSL 0.9.2 release. Additionally I've started to clean the XS sources
- up and fixed a few little bugs and inconsistencies in OpenSSL.{pm,xs} and
- openssl_bio.xs.
- [Ralf S. Engelschall]
- *) Fix the generation of two part addresses in perl.
- [Kenji Miyake <kenji@miyake.org>, integrated by Ben Laurie]
- *) Add config entry for Linux on MIPS.
- [John Tobey <jtobey@channel1.com>]
- *) Make links whenever Configure is run, unless we are on Windoze.
- [Ben Laurie]
- *) Permit extensions to be added to CRLs using crl_section in openssl.cnf.
- Currently only issuerAltName and AuthorityKeyIdentifier make any sense
- in CRLs.
- [Steve Henson]
- *) Add a useful kludge to allow package maintainers to specify compiler and
- other platforms details on the command line without having to patch the
- Configure script everytime: One now can use ``perl Configure
- <id>:<details>'', i.e. platform ids are allowed to have details appended
- to them (seperated by colons). This is treated as there would be a static
- pre-configured entry in Configure's %table under key <id> with value
- <details> and ``perl Configure <id>'' is called. So, when you want to
- perform a quick test-compile under FreeBSD 3.1 with pgcc and without
- assembler stuff you can use ``perl Configure "FreeBSD-elf:pgcc:-O6:::"''
- now, which overrides the FreeBSD-elf entry on-the-fly.
- [Ralf S. Engelschall]
- *) Disable new TLS1 ciphersuites by default: they aren't official yet.
- [Ben Laurie]
- *) Allow DSO flags like -fpic, -fPIC, -KPIC etc. to be specified
- on the `perl Configure ...' command line. This way one can compile
- OpenSSL libraries with Position Independent Code (PIC) which is needed
- for linking it into DSOs.
- [Ralf S. Engelschall]
- *) Remarkably, export ciphers were totally broken and no-one had noticed!
- Fixed.
- [Ben Laurie]
- *) Cleaned up the LICENSE document: The official contact for any license
- questions now is the OpenSSL core team under openssl-core@openssl.org.
- And add a paragraph about the dual-license situation to make sure people
- recognize that _BOTH_ the OpenSSL license _AND_ the SSLeay license apply
- to the OpenSSL toolkit.
- [Ralf S. Engelschall]
- *) General source tree makefile cleanups: Made `making xxx in yyy...'
- display consistent in the source tree and replaced `/bin/rm' by `rm'.
- Additonally cleaned up the `make links' target: Remove unnecessary
- semicolons, subsequent redundant removes, inline point.sh into mklink.sh
- to speed processing and no longer clutter the display with confusing
- stuff. Instead only the actually done links are displayed.
- [Ralf S. Engelschall]
- *) Permit null encryption ciphersuites, used for authentication only. It used
- to be necessary to set the preprocessor define SSL_ALLOW_ENULL to do this.
- It is now necessary to set SSL_FORBID_ENULL to prevent the use of null
- encryption.
- [Ben Laurie]
- *) Add a bunch of fixes to the PKCS#7 stuff. It used to sometimes reorder
- signed attributes when verifying signatures (this would break them),
- the detached data encoding was wrong and public keys obtained using
- X509_get_pubkey() weren't freed.
- [Steve Henson]
- *) Add text documentation for the BUFFER functions. Also added a work around
- to a Win95 console bug. This was triggered by the password read stuff: the
- last character typed gets carried over to the next fread(). If you were
- generating a new cert request using 'req' for example then the last
- character of the passphrase would be CR which would then enter the first
- field as blank.
- [Steve Henson]
- *) Added the new `Includes OpenSSL Cryptography Software' button as
- doc/openssl_button.{gif,html} which is similar in style to the old SSLeay
- button and can be used by applications based on OpenSSL to show the
- relationship to the OpenSSL project.
- [Ralf S. Engelschall]
- *) Remove confusing variables in function signatures in files
- ssl/ssl_lib.c and ssl/ssl.h.
- [Lennart Bong <lob@kulthea.stacken.kth.se>]
- *) Don't install bss_file.c under PREFIX/include/
- [Lennart Bong <lob@kulthea.stacken.kth.se>]
- *) Get the Win32 compile working again. Modify mkdef.pl so it can handle
- functions that return function pointers and has support for NT specific
- stuff. Fix mk1mf.pl and VC-32.pl to support NT differences also. Various
- #ifdef WIN32 and WINNTs sprinkled about the place and some changes from
- unsigned to signed types: this was killing the Win32 compile.
- [Steve Henson]
- *) Add new certificate file to stack functions,
- SSL_add_dir_cert_subjects_to_stack() and
- SSL_add_file_cert_subjects_to_stack(). These largely supplant
- SSL_load_client_CA_file(), and can be used to add multiple certs easily
- to a stack (usually this is then handed to SSL_CTX_set_client_CA_list()).
- This means that Apache-SSL and similar packages don't have to mess around
- to add as many CAs as they want to the preferred list.
- [Ben Laurie]
- *) Experiment with doxygen documentation. Currently only partially applied to
- ssl/ssl_lib.c.
- See http://www.stack.nl/~dimitri/doxygen/index.html, and run doxygen with
- openssl.doxy as the configuration file.
- [Ben Laurie]
-
- *) Get rid of remaining C++-style comments which strict C compilers hate.
- [Ralf S. Engelschall, pointed out by Carlos Amengual]
- *) Changed BN_RECURSION in bn_mont.c to BN_RECURSION_MONT so it is not
- compiled in by default: it has problems with large keys.
- [Steve Henson]
- *) Add a bunch of SSL_xxx() functions for configuring the temporary RSA and
- DH private keys and/or callback functions which directly correspond to
- their SSL_CTX_xxx() counterparts but work on a per-connection basis. This
- is needed for applications which have to configure certificates on a
- per-connection basis (e.g. Apache+mod_ssl) instead of a per-context basis
- (e.g. s_server).
- For the RSA certificate situation is makes no difference, but
- for the DSA certificate situation this fixes the "no shared cipher"
- problem where the OpenSSL cipher selection procedure failed because the
- temporary keys were not overtaken from the context and the API provided
- no way to reconfigure them.
- The new functions now let applications reconfigure the stuff and they
- are in detail: SSL_need_tmp_RSA, SSL_set_tmp_rsa, SSL_set_tmp_dh,
- SSL_set_tmp_rsa_callback and SSL_set_tmp_dh_callback. Additionally a new
- non-public-API function ssl_cert_instantiate() is used as a helper
- function and also to reduce code redundancy inside ssl_rsa.c.
- [Ralf S. Engelschall]
- *) Move s_server -dcert and -dkey options out of the undocumented feature
- area because they are useful for the DSA situation and should be
- recognized by the users.
- [Ralf S. Engelschall]
- *) Fix the cipher decision scheme for export ciphers: the export bits are
- *not* within SSL_MKEY_MASK or SSL_AUTH_MASK, they are within
- SSL_EXP_MASK. So, the original variable has to be used instead of the
- already masked variable.
- [Richard Levitte <levitte@stacken.kth.se>]
- *) Fix 'port' variable from `int' to `unsigned int' in crypto/bio/b_sock.c
- [Richard Levitte <levitte@stacken.kth.se>]
- *) Change type of another md_len variable in pk7_doit.c:PKCS7_dataFinal()
- from `int' to `unsigned int' because it's a length and initialized by
- EVP_DigestFinal() which expects an `unsigned int *'.
- [Richard Levitte <levitte@stacken.kth.se>]
- *) Don't hard-code path to Perl interpreter on shebang line of Configure
- script. Instead use the usual Shell->Perl transition trick.
- [Ralf S. Engelschall]
- *) Make `openssl x509 -noout -modulus' functional also for DSA certificates
- (in addition to RSA certificates) to match the behaviour of `openssl dsa
- -noout -modulus' as it's already the case for `openssl rsa -noout
- -modulus'. For RSA the -modulus is the real "modulus" while for DSA
- currently the public key is printed (a decision which was already done by
- `openssl dsa -modulus' in the past) which serves a similar purpose.
- Additionally the NO_RSA no longer completely removes the whole -modulus
- option; it now only avoids using the RSA stuff. Same applies to NO_DSA
- now, too.
- [Ralf S. Engelschall]
- *) Add Arne Ansper's reliable BIO - this is an encrypted, block-digested
- BIO. See the source (crypto/evp/bio_ok.c) for more info.
- [Arne Ansper <arne@ats.cyber.ee>]
- *) Dump the old yucky req code that tried (and failed) to allow raw OIDs
- to be added. Now both 'req' and 'ca' can use new objects defined in the
- config file.
- [Steve Henson]
- *) Add cool BIO that does syslog (or event log on NT).
- [Arne Ansper <arne@ats.cyber.ee>, integrated by Ben Laurie]
- *) Add support for new TLS ciphersuites, TLS_RSA_EXPORT56_WITH_RC4_56_MD5,
- TLS_RSA_EXPORT56_WITH_RC2_CBC_56_MD5 and
- TLS_RSA_EXPORT56_WITH_DES_CBC_SHA, as specified in "56-bit Export Cipher
- Suites For TLS", draft-ietf-tls-56-bit-ciphersuites-00.txt.
- [Ben Laurie]
- *) Add preliminary config info for new extension code.
- [Steve Henson]
- *) Make RSA_NO_PADDING really use no padding.
- [Ulf Moeller <ulf@fitug.de>]
- *) Generate errors when private/public key check is done.
- [Ben Laurie]
- *) Overhaul for 'crl' utility. New function X509_CRL_print. Partial support
- for some CRL extensions and new objects added.
- [Steve Henson]
- *) Really fix the ASN1 IMPLICIT bug this time... Partial support for private
- key usage extension and fuller support for authority key id.
- [Steve Henson]
- *) Add OAEP encryption for the OpenSSL crypto library. OAEP is the improved
- padding method for RSA, which is recommended for new applications in PKCS
- #1 v2.0 (RFC 2437, October 1998).
- OAEP (Optimal Asymmetric Encryption Padding) has better theoretical
- foundations than the ad-hoc padding used in PKCS #1 v1.5. It is secure
- against Bleichbacher's attack on RSA.
- [Ulf Moeller <ulf@fitug.de>, reformatted, corrected and integrated by
- Ben Laurie]
- *) Updates to the new SSL compression code
- [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
- *) Fix so that the version number in the master secret, when passed
- via RSA, checks that if TLS was proposed, but we roll back to SSLv3
- (because the server will not accept higher), that the version number
- is 0x03,0x01, not 0x03,0x00
- [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
- *) Run extensive memory leak checks on SSL apps. Fixed *lots* of memory
- leaks in ssl/ relating to new X509_get_pubkey() behaviour. Also fixes
- in apps/ and an unrelated leak in crypto/dsa/dsa_vrf.c
- [Steve Henson]
- *) Support for RAW extensions where an arbitrary extension can be
- created by including its DER encoding. See apps/openssl.cnf for
- an example.
- [Steve Henson]
- *) Make sure latest Perl versions don't interpret some generated C array
- code as Perl array code in the crypto/err/err_genc.pl script.
- [Lars Weber <3weber@informatik.uni-hamburg.de>]
- *) Modify ms/do_ms.bat to not generate assembly language makefiles since
- not many people have the assembler. Various Win32 compilation fixes and
- update to the INSTALL.W32 file with (hopefully) more accurate Win32
- build instructions.
- [Steve Henson]
- *) Modify configure script 'Configure' to automatically create crypto/date.h
- file under Win32 and also build pem.h from pem.org. New script
- util/mkfiles.pl to create the MINFO file on environments that can't do a
- 'make files': perl util/mkfiles.pl >MINFO should work.
- [Steve Henson]
- *) Major rework of DES function declarations, in the pursuit of correctness
- and purity. As a result, many evil casts evaporated, and some weirdness,
- too. You may find this causes warnings in your code. Zapping your evil
- casts will probably fix them. Mostly.
- [Ben Laurie]
- *) Fix for a typo in asn1.h. Bug fix to object creation script
- obj_dat.pl. It considered a zero in an object definition to mean
- "end of object": none of the objects in objects.h have any zeros
- so it wasn't spotted.
- [Steve Henson, reported by Erwann ABALEA <eabalea@certplus.com>]
- *) Add support for Triple DES Cipher Block Chaining with Output Feedback
- Masking (CBCM). In the absence of test vectors, the best I have been able
- to do is check that the decrypt undoes the encrypt, so far. Send me test
- vectors if you have them.
- [Ben Laurie]
- *) Correct calculation of key length for export ciphers (too much space was
- allocated for null ciphers). This has not been tested!
- [Ben Laurie]
- *) Modifications to the mkdef.pl for Win32 DEF file creation. The usage
- message is now correct (it understands "crypto" and "ssl" on its
- command line). There is also now an "update" option. This will update
- the util/ssleay.num and util/libeay.num files with any new functions.
- If you do a:
- perl util/mkdef.pl crypto ssl update
- it will update them.
- [Steve Henson]
- *) Overhauled the Perl interface (perl/*):
- - ported BN stuff to OpenSSL's different BN library
- - made the perl/ source tree CVS-aware
- - renamed the package from SSLeay to OpenSSL (the files still contain
- their history because I've copied them in the repository)
- - removed obsolete files (the test scripts will be replaced
- by better Test::Harness variants in the future)
- [Ralf S. Engelschall]
- *) First cut for a very conservative source tree cleanup:
- 1. merge various obsolete readme texts into doc/ssleay.txt
- where we collect the old documents and readme texts.
- 2. remove the first part of files where I'm already sure that we no
- longer need them because of three reasons: either they are just temporary
- files which were left by Eric or they are preserved original files where
- I've verified that the diff is also available in the CVS via "cvs diff
- -rSSLeay_0_8_1b" or they were renamed (as it was definitely the case for
- the crypto/md/ stuff).
- [Ralf S. Engelschall]
- *) More extension code. Incomplete support for subject and issuer alt
- name, issuer and authority key id. Change the i2v function parameters
- and add an extra 'crl' parameter in the X509V3_CTX structure: guess
- what that's for :-) Fix to ASN1 macro which messed up
- IMPLICIT tag and add f_enum.c which adds a2i, i2a for ENUMERATED.
- [Steve Henson]
- *) Preliminary support for ENUMERATED type. This is largely copied from the
- INTEGER code.
- [Steve Henson]
- *) Add new function, EVP_MD_CTX_copy() to replace frequent use of memcpy.
- [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
- *) Make sure `make rehash' target really finds the `openssl' program.
- [Ralf S. Engelschall, Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
- *) Squeeze another 7% of speed out of MD5 assembler, at least on a P2. I'd
- like to hear about it if this slows down other processors.
- [Ben Laurie]
- *) Add CygWin32 platform information to Configure script.
- [Alan Batie <batie@aahz.jf.intel.com>]
- *) Fixed ms/32all.bat script: `no_asm' -> `no-asm'
- [Rainer W. Gerling <gerling@mpg-gv.mpg.de>]
-
- *) New program nseq to manipulate netscape certificate sequences
- [Steve Henson]
- *) Modify crl2pkcs7 so it supports multiple -certfile arguments. Fix a
- few typos.
- [Steve Henson]
- *) Fixes to BN code. Previously the default was to define BN_RECURSION
- but the BN code had some problems that would cause failures when
- doing certificate verification and some other functions.
- [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
- *) Add ASN1 and PEM code to support netscape certificate sequences.
- [Steve Henson]
- *) Add ASN1 and PEM code to support netscape certificate sequences.
- [Steve Henson]
- *) Add several PKIX and private extended key usage OIDs.
- [Steve Henson]
- *) Modify the 'ca' program to handle the new extension code. Modify
- openssl.cnf for new extension format, add comments.
- [Steve Henson]
- *) More X509 V3 changes. Fix typo in v3_bitstr.c. Add support to 'req'
- and add a sample to openssl.cnf so req -x509 now adds appropriate
- CA extensions.
- [Steve Henson]
- *) Continued X509 V3 changes. Add to other makefiles, integrate with the
- error code, add initial support to X509_print() and x509 application.
- [Steve Henson]
- *) Takes a deep breath and start addding X509 V3 extension support code. Add
- files in crypto/x509v3. Move original stuff to crypto/x509v3/old. All this
- stuff is currently isolated and isn't even compiled yet.
- [Steve Henson]
- *) Continuing patches for GeneralizedTime. Fix up certificate and CRL
- ASN1 to use ASN1_TIME and modify print routines to use ASN1_TIME_print.
- Removed the versions check from X509 routines when loading extensions:
- this allows certain broken certificates that don't set the version
- properly to be processed.
- [Steve Henson]
- *) Deal with irritating shit to do with dependencies, in YAAHW (Yet Another
- Ad Hoc Way) - Makefile.ssls now all contain local dependencies, which
- can still be regenerated with "make depend".
- [Ben Laurie]
- *) Spelling mistake in C version of CAST-128.
- [Ben Laurie, reported by Jeremy Hylton <jeremy@cnri.reston.va.us>]
- *) Changes to the error generation code. The perl script err-code.pl
- now reads in the old error codes and retains the old numbers, only
- adding new ones if necessary. It also only changes the .err files if new
- codes are added. The makefiles have been modified to only insert errors
- when needed (to avoid needlessly modifying header files). This is done
- by only inserting errors if the .err file is newer than the auto generated
- C file. To rebuild all the error codes from scratch (the old behaviour)
- either modify crypto/Makefile.ssl to pass the -regen flag to err_code.pl
- or delete all the .err files.
- [Steve Henson]
- *) CAST-128 was incorrectly implemented for short keys. The C version has
- been fixed, but is untested. The assembler versions are also fixed, but
- new assembler HAS NOT BEEN GENERATED FOR WIN32 - the Makefile needs fixing
- to regenerate it if needed.
- [Ben Laurie, reported (with fix for C version) by Jun-ichiro itojun
- Hagino <itojun@kame.net>]
- *) File was opened incorrectly in randfile.c.
- [Ulf Möller <ulf@fitug.de>]
- *) Beginning of support for GeneralizedTime. d2i, i2d, check and print
- functions. Also ASN1_TIME suite which is a CHOICE of UTCTime or
- GeneralizedTime. ASN1_TIME is the proper type used in certificates et
- al: it's just almost always a UTCTime. Note this patch adds new error
- codes so do a "make errors" if there are problems.
- [Steve Henson]
- *) Correct Linux 1 recognition in config.
- [Ulf Möller <ulf@fitug.de>]
- *) Remove pointless MD5 hash when using DSA keys in ca.
- [Anonymous <nobody@replay.com>]
- *) Generate an error if given an empty string as a cert directory. Also
- generate an error if handed NULL (previously returned 0 to indicate an
- error, but didn't set one).
- [Ben Laurie, reported by Anonymous <nobody@replay.com>]
- *) Add prototypes to SSL methods. Make SSL_write's buffer const, at last.
- [Ben Laurie]
- *) Fix the dummy function BN_ref_mod_exp() in rsaref.c to have the correct
- parameters. This was causing a warning which killed off the Win32 compile.
- [Steve Henson]
- *) Remove C++ style comments from crypto/bn/bn_local.h.
- [Neil Costigan <neil.costigan@celocom.com>]
- *) The function OBJ_txt2nid was broken. It was supposed to return a nid
- based on a text string, looking up short and long names and finally
- "dot" format. The "dot" format stuff didn't work. Added new function
- OBJ_txt2obj to do the same but return an ASN1_OBJECT and rewrote
- OBJ_txt2nid to use it. OBJ_txt2obj can also return objects even if the
- OID is not part of the table.
- [Steve Henson]
- *) Add prototypes to X509 lookup/verify methods, fixing a bug in
- X509_LOOKUP_by_alias().
- [Ben Laurie]
- *) Sort openssl functions by name.
- [Ben Laurie]
- *) Get the gendsa program working (hopefully) and add it to app list. Remove
- encryption from sample DSA keys (in case anyone is interested the password
- was "1234").
- [Steve Henson]
- *) Make _all_ *_free functions accept a NULL pointer.
- [Frans Heymans <fheymans@isaserver.be>]
- *) If a DH key is generated in s3_srvr.c, don't blow it by trying to use
- NULL pointers.
- [Anonymous <nobody@replay.com>]
- *) s_server should send the CAfile as acceptable CAs, not its own cert.
- [Bodo Moeller <3moeller@informatik.uni-hamburg.de>]
- *) Don't blow it for numeric -newkey arguments to apps/req.
- [Bodo Moeller <3moeller@informatik.uni-hamburg.de>]
- *) Temp key "for export" tests were wrong in s3_srvr.c.
- [Anonymous <nobody@replay.com>]
- *) Add prototype for temp key callback functions
- SSL_CTX_set_tmp_{rsa,dh}_callback().
- [Ben Laurie]
- *) Make DH_free() tolerate being passed a NULL pointer (like RSA_free() and
- DSA_free()). Make X509_PUBKEY_set() check for errors in d2i_PublicKey().
- [Steve Henson]
- *) X509_name_add_entry() freed the wrong thing after an error.
- [Arne Ansper <arne@ats.cyber.ee>]
- *) rsa_eay.c would attempt to free a NULL context.
- [Arne Ansper <arne@ats.cyber.ee>]
- *) BIO_s_socket() had a broken should_retry() on Windoze.
- [Arne Ansper <arne@ats.cyber.ee>]
- *) BIO_f_buffer() didn't pass on BIO_CTRL_FLUSH.
- [Arne Ansper <arne@ats.cyber.ee>]
- *) Make sure the already existing X509_STORE->depth variable is initialized
- in X509_STORE_new(), but document the fact that this variable is still
- unused in the certificate verification process.
- [Ralf S. Engelschall]
- *) Fix the various library and apps files to free up pkeys obtained from
- X509_PUBKEY_get() et al. Also allow x509.c to handle netscape extensions.
- [Steve Henson]
- *) Fix reference counting in X509_PUBKEY_get(). This makes
- demos/maurice/example2.c work, amongst others, probably.
- [Steve Henson and Ben Laurie]
- *) First cut of a cleanup for apps/. First the `ssleay' program is now named
- `openssl' and second, the shortcut symlinks for the `openssl <command>'
- are no longer created. This way we have a single and consistent command
- line interface `openssl <command>', similar to `cvs <command>'.
- [Ralf S. Engelschall, Paul Sutton and Ben Laurie]
- *) ca.c: move test for DSA keys inside #ifndef NO_DSA. Make pubkey
- BIT STRING wrapper always have zero unused bits.
- [Steve Henson]
- *) Add CA.pl, perl version of CA.sh, add extended key usage OID.
- [Steve Henson]
- *) Make the top-level INSTALL documentation easier to understand.
- [Paul Sutton]
- *) Makefiles updated to exit if an error occurs in a sub-directory
- make (including if user presses ^C) [Paul Sutton]
- *) Make Montgomery context stuff explicit in RSA data structure.
- [Ben Laurie]
- *) Fix build order of pem and err to allow for generated pem.h.
- [Ben Laurie]
- *) Fix renumbering bug in X509_NAME_delete_entry().
- [Ben Laurie]
- *) Enhanced the err-ins.pl script so it makes the error library number
- global and can add a library name. This is needed for external ASN1 and
- other error libraries.
- [Steve Henson]
- *) Fixed sk_insert which never worked properly.
- [Steve Henson]
- *) Fix ASN1 macros so they can handle indefinite length construted
- EXPLICIT tags. Some non standard certificates use these: they can now
- be read in.
- [Steve Henson]
- *) Merged the various old/obsolete SSLeay documentation files (doc/xxx.doc)
- into a single doc/ssleay.txt bundle. This way the information is still
- preserved but no longer messes up this directory. Now it's new room for
- the new set of documenation files.
- [Ralf S. Engelschall]
- *) SETs were incorrectly DER encoded. This was a major pain, because they
- shared code with SEQUENCEs, which aren't coded the same. This means that
- almost everything to do with SETs or SEQUENCEs has either changed name or
- number of arguments.
- [Ben Laurie, based on a partial fix by GP Jayan <gp@nsj.co.jp>]
- *) Fix test data to work with the above.
- [Ben Laurie]
- *) Fix the RSA header declarations that hid a bug I fixed in 0.9.0b but
- was already fixed by Eric for 0.9.1 it seems.
- [Ben Laurie - pointed out by Ulf Möller <ulf@fitug.de>]
- *) Autodetect FreeBSD3.
- [Ben Laurie]
- *) Fix various bugs in Configure. This affects the following platforms:
- nextstep
- ncr-scde
- unixware-2.0
- unixware-2.0-pentium
- sco5-cc.
- [Ben Laurie]
- *) Eliminate generated files from CVS. Reorder tests to regenerate files
- before they are needed.
- [Ben Laurie]
- *) Generate Makefile.ssl from Makefile.org (to keep CVS happy).
- [Ben Laurie]
- Changes between 0.9.1b and 0.9.1c [23-Dec-1998]
- *) Added OPENSSL_VERSION_NUMBER to crypto/crypto.h and
- changed SSLeay to OpenSSL in version strings.
- [Ralf S. Engelschall]
-
- *) Some fixups to the top-level documents.
- [Paul Sutton]
- *) Fixed the nasty bug where rsaref.h was not found under compile-time
- because the symlink to include/ was missing.
- [Ralf S. Engelschall]
- *) Incorporated the popular no-RSA/DSA-only patches
- which allow to compile a RSA-free SSLeay.
- [Andrew Cooke / Interrader Ldt., Ralf S. Engelschall]
- *) Fixed nasty rehash problem under `make -f Makefile.ssl links'
- when "ssleay" is still not found.
- [Ralf S. Engelschall]
- *) Added more platforms to Configure: Cray T3E, HPUX 11,
- [Ralf S. Engelschall, Beckmann <beckman@acl.lanl.gov>]
- *) Updated the README file.
- [Ralf S. Engelschall]
- *) Added various .cvsignore files in the CVS repository subdirs
- to make a "cvs update" really silent.
- [Ralf S. Engelschall]
- *) Recompiled the error-definition header files and added
- missing symbols to the Win32 linker tables.
- [Ralf S. Engelschall]
- *) Cleaned up the top-level documents;
- o new files: CHANGES and LICENSE
- o merged VERSION, HISTORY* and README* files a CHANGES.SSLeay
- o merged COPYRIGHT into LICENSE
- o removed obsolete TODO file
- o renamed MICROSOFT to INSTALL.W32
- [Ralf S. Engelschall]
- *) Removed dummy files from the 0.9.1b source tree:
- crypto/asn1/x crypto/bio/cd crypto/bio/fg crypto/bio/grep crypto/bio/vi
- crypto/bn/asm/......add.c crypto/bn/asm/a.out crypto/dsa/f crypto/md5/f
- crypto/pem/gmon.out crypto/perlasm/f crypto/pkcs7/build crypto/rsa/f
- crypto/sha/asm/f crypto/threads/f ms/zzz ssl/f ssl/f.mak test/f
- util/f.mak util/pl/f util/pl/f.mak crypto/bf/bf_locl.old apps/f
- [Ralf S. Engelschall]
- *) Added various platform portability fixes.
- [Mark J. Cox]
- *) The Genesis of the OpenSSL rpject:
- We start with the latest (unreleased) SSLeay version 0.9.1b which Eric A.
- Young and Tim J. Hudson created while they were working for C2Net until
- summer 1998.
- [The OpenSSL Project]
-
- Changes between 0.9.0b and 0.9.1b [not released]
- *) Updated a few CA certificates under certs/
- [Eric A. Young]
- *) Changed some BIGNUM api stuff.
- [Eric A. Young]
- *) Various platform ports: OpenBSD, Ultrix, IRIX 64bit, NetBSD,
- DGUX x86, Linux Alpha, etc.
- [Eric A. Young]
- *) New COMP library [crypto/comp/] for SSL Record Layer Compression:
- RLE (dummy implemented) and ZLIB (really implemented when ZLIB is
- available).
- [Eric A. Young]
- *) Add -strparse option to asn1pars program which parses nested
- binary structures
- [Dr Stephen Henson <shenson@bigfoot.com>]
- *) Added "oid_file" to ssleay.cnf for "ca" and "req" programs.
- [Eric A. Young]
- *) DSA fix for "ca" program.
- [Eric A. Young]
- *) Added "-genkey" option to "dsaparam" program.
- [Eric A. Young]
- *) Added RIPE MD160 (rmd160) message digest.
- [Eric A. Young]
- *) Added -a (all) option to "ssleay version" command.
- [Eric A. Young]
- *) Added PLATFORM define which is the id given to Configure.
- [Eric A. Young]
- *) Added MemCheck_XXXX functions to crypto/mem.c for memory checking.
- [Eric A. Young]
- *) Extended the ASN.1 parser routines.
- [Eric A. Young]
- *) Extended BIO routines to support REUSEADDR, seek, tell, etc.
- [Eric A. Young]
- *) Added a BN_CTX to the BN library.
- [Eric A. Young]
- *) Fixed the weak key values in DES library
- [Eric A. Young]
- *) Changed API in EVP library for cipher aliases.
- [Eric A. Young]
- *) Added support for RC2/64bit cipher.
- [Eric A. Young]
- *) Converted the lhash library to the crypto/mem.c functions.
- [Eric A. Young]
- *) Added more recognized ASN.1 object ids.
- [Eric A. Young]
- *) Added more RSA padding checks for SSL/TLS.
- [Eric A. Young]
- *) Added BIO proxy/filter functionality.
- [Eric A. Young]
- *) Added extra_certs to SSL_CTX which can be used
- send extra CA certificates to the client in the CA cert chain sending
- process. It can be configured with SSL_CTX_add_extra_chain_cert().
- [Eric A. Young]
- *) Now Fortezza is denied in the authentication phase because
- this is key exchange mechanism is not supported by SSLeay at all.
- [Eric A. Young]
- *) Additional PKCS1 checks.
- [Eric A. Young]
- *) Support the string "TLSv1" for all TLS v1 ciphers.
- [Eric A. Young]
- *) Added function SSL_get_ex_data_X509_STORE_CTX_idx() which gives the
- ex_data index of the SSL context in the X509_STORE_CTX ex_data.
- [Eric A. Young]
- *) Fixed a few memory leaks.
- [Eric A. Young]
- *) Fixed various code and comment typos.
- [Eric A. Young]
- *) A minor bug in ssl/s3_clnt.c where there would always be 4 0
- bytes sent in the client random.
- [Edward Bishop <ebishop@spyglass.com>]
|