123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747 |
- /* crypto/bn/bn_exp.c */
- /* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- *
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to. The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code. The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- *
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- * must display the following acknowledgement:
- * "This product includes cryptographic software written by
- * Eric Young (eay@cryptsoft.com)"
- * The word 'cryptographic' can be left out if the rouines from the library
- * being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from
- * the apps directory (application code) you must include an acknowledgement:
- * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- *
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed. i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
- /* ====================================================================
- * Copyright (c) 1998-2000 The OpenSSL Project. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- * software must display the following acknowledgment:
- * "This product includes software developed by the OpenSSL Project
- * for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- * endorse or promote products derived from this software without
- * prior written permission. For written permission, please contact
- * openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- * nor may "OpenSSL" appear in their names without prior written
- * permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- * acknowledgment:
- * "This product includes software developed by the OpenSSL Project
- * for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com). This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
- #include "cryptlib.h"
- #include "bn_lcl.h"
- #define TABLE_SIZE 32
- /* this one works - simple but works */
- int BN_exp(BIGNUM *r, const BIGNUM *a, const BIGNUM *p, BN_CTX *ctx)
- {
- int i,bits,ret=0;
- BIGNUM *v,*rr;
- BN_CTX_start(ctx);
- if ((r == a) || (r == p))
- rr = BN_CTX_get(ctx);
- else
- rr = r;
- if ((v = BN_CTX_get(ctx)) == NULL) goto err;
- if (BN_copy(v,a) == NULL) goto err;
- bits=BN_num_bits(p);
- if (BN_is_odd(p))
- { if (BN_copy(rr,a) == NULL) goto err; }
- else { if (!BN_one(rr)) goto err; }
- for (i=1; i<bits; i++)
- {
- if (!BN_sqr(v,v,ctx)) goto err;
- if (BN_is_bit_set(p,i))
- {
- if (!BN_mul(rr,rr,v,ctx)) goto err;
- }
- }
- ret=1;
- err:
- if (r != rr) BN_copy(r,rr);
- BN_CTX_end(ctx);
- return(ret);
- }
- int BN_mod_exp(BIGNUM *r, const BIGNUM *a, const BIGNUM *p, const BIGNUM *m,
- BN_CTX *ctx)
- {
- int ret;
- bn_check_top(a);
- bn_check_top(p);
- bn_check_top(m);
- /* For even modulus m = 2^k*m_odd, it might make sense to compute
- * a^p mod m_odd and a^p mod 2^k separately (with Montgomery
- * exponentiation for the odd part), using appropriate exponent
- * reductions, and combine the results using the CRT.
- *
- * For now, we use Montgomery only if the modulus is odd; otherwise,
- * exponentiation using the reciprocal-based quick remaindering
- * algorithm is used.
- *
- * (Timing obtained with expspeed.c [computations a^p mod m
- * where a, p, m are of the same length: 256, 512, 1024, 2048,
- * 4096, 8192 bits], compared to the running time of the
- * standard algorithm:
- *
- * BN_mod_exp_mont 33 .. 40 % [AMD K6-2, Linux, debug configuration]
- * 55 .. 77 % [UltraSparc processor, but
- * debug-solaris-sparcv8-gcc conf.]
- *
- * BN_mod_exp_recp 50 .. 70 % [AMD K6-2, Linux, debug configuration]
- * 62 .. 118 % [UltraSparc, debug-solaris-sparcv8-gcc]
- *
- * On the Sparc, BN_mod_exp_recp was faster than BN_mod_exp_mont
- * at 2048 and more bits, but at 512 and 1024 bits, it was
- * slower even than the standard algorithm!
- *
- * "Real" timings [linux-elf, solaris-sparcv9-gcc configurations]
- * should be obtained when the new Montgomery reduction code
- * has been integrated into OpenSSL.)
- */
- #define MONT_MUL_MOD
- #define MONT_EXP_WORD
- #define RECP_MUL_MOD
- #ifdef MONT_MUL_MOD
- /* I have finally been able to take out this pre-condition of
- * the top bit being set. It was caused by an error in BN_div
- * with negatives. There was also another problem when for a^b%m
- * a >= m. eay 07-May-97 */
- /* if ((m->d[m->top-1]&BN_TBIT) && BN_is_odd(m)) */
- if (BN_is_odd(m))
- {
- # ifdef MONT_EXP_WORD
- if (a->top == 1 && !a->neg)
- {
- BN_ULONG A = a->d[0];
- ret=BN_mod_exp_mont_word(r,A,p,m,ctx,NULL);
- }
- else
- # endif
- ret=BN_mod_exp_mont(r,a,p,m,ctx,NULL);
- }
- else
- #endif
- #ifdef RECP_MUL_MOD
- { ret=BN_mod_exp_recp(r,a,p,m,ctx); }
- #else
- { ret=BN_mod_exp_simple(r,a,p,m,ctx); }
- #endif
- return(ret);
- }
- int BN_mod_exp_recp(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
- const BIGNUM *m, BN_CTX *ctx)
- {
- int i,j,bits,ret=0,wstart,wend,window,wvalue;
- int start=1,ts=0;
- BIGNUM *aa;
- BIGNUM val[TABLE_SIZE];
- BN_RECP_CTX recp;
- bits=BN_num_bits(p);
- if (bits == 0)
- {
- ret = BN_one(r);
- return ret;
- }
- BN_CTX_start(ctx);
- if ((aa = BN_CTX_get(ctx)) == NULL) goto err;
- BN_RECP_CTX_init(&recp);
- if (m->neg)
- {
- /* ignore sign of 'm' */
- if (!BN_copy(aa, m)) goto err;
- aa->neg = 0;
- if (BN_RECP_CTX_set(&recp,aa,ctx) <= 0) goto err;
- }
- else
- {
- if (BN_RECP_CTX_set(&recp,m,ctx) <= 0) goto err;
- }
- BN_init(&(val[0]));
- ts=1;
- if (!BN_nnmod(&(val[0]),a,m,ctx)) goto err; /* 1 */
- if (BN_is_zero(&(val[0])))
- {
- ret = BN_zero(r);
- goto err;
- }
- window = BN_window_bits_for_exponent_size(bits);
- if (window > 1)
- {
- if (!BN_mod_mul_reciprocal(aa,&(val[0]),&(val[0]),&recp,ctx))
- goto err; /* 2 */
- j=1<<(window-1);
- for (i=1; i<j; i++)
- {
- BN_init(&val[i]);
- if (!BN_mod_mul_reciprocal(&(val[i]),&(val[i-1]),aa,&recp,ctx))
- goto err;
- }
- ts=i;
- }
-
- start=1; /* This is used to avoid multiplication etc
- * when there is only the value '1' in the
- * buffer. */
- wvalue=0; /* The 'value' of the window */
- wstart=bits-1; /* The top bit of the window */
- wend=0; /* The bottom bit of the window */
- if (!BN_one(r)) goto err;
- for (;;)
- {
- if (BN_is_bit_set(p,wstart) == 0)
- {
- if (!start)
- if (!BN_mod_mul_reciprocal(r,r,r,&recp,ctx))
- goto err;
- if (wstart == 0) break;
- wstart--;
- continue;
- }
- /* We now have wstart on a 'set' bit, we now need to work out
- * how bit a window to do. To do this we need to scan
- * forward until the last set bit before the end of the
- * window */
- j=wstart;
- wvalue=1;
- wend=0;
- for (i=1; i<window; i++)
- {
- if (wstart-i < 0) break;
- if (BN_is_bit_set(p,wstart-i))
- {
- wvalue<<=(i-wend);
- wvalue|=1;
- wend=i;
- }
- }
- /* wend is the size of the current window */
- j=wend+1;
- /* add the 'bytes above' */
- if (!start)
- for (i=0; i<j; i++)
- {
- if (!BN_mod_mul_reciprocal(r,r,r,&recp,ctx))
- goto err;
- }
-
- /* wvalue will be an odd number < 2^window */
- if (!BN_mod_mul_reciprocal(r,r,&(val[wvalue>>1]),&recp,ctx))
- goto err;
- /* move the 'window' down further */
- wstart-=wend+1;
- wvalue=0;
- start=0;
- if (wstart < 0) break;
- }
- ret=1;
- err:
- BN_CTX_end(ctx);
- for (i=0; i<ts; i++)
- BN_clear_free(&(val[i]));
- BN_RECP_CTX_free(&recp);
- return(ret);
- }
- int BN_mod_exp_mont(BIGNUM *rr, const BIGNUM *a, const BIGNUM *p,
- const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *in_mont)
- {
- int i,j,bits,ret=0,wstart,wend,window,wvalue;
- int start=1,ts=0;
- BIGNUM *d,*r;
- const BIGNUM *aa;
- BIGNUM val[TABLE_SIZE];
- BN_MONT_CTX *mont=NULL;
- bn_check_top(a);
- bn_check_top(p);
- bn_check_top(m);
- if (!(m->d[0] & 1))
- {
- BNerr(BN_F_BN_MOD_EXP_MONT,BN_R_CALLED_WITH_EVEN_MODULUS);
- return(0);
- }
- bits=BN_num_bits(p);
- if (bits == 0)
- {
- ret = BN_one(rr);
- return ret;
- }
- BN_CTX_start(ctx);
- d = BN_CTX_get(ctx);
- r = BN_CTX_get(ctx);
- if (d == NULL || r == NULL) goto err;
- /* If this is not done, things will break in the montgomery
- * part */
- if (in_mont != NULL)
- mont=in_mont;
- else
- {
- if ((mont=BN_MONT_CTX_new()) == NULL) goto err;
- if (!BN_MONT_CTX_set(mont,m,ctx)) goto err;
- }
- BN_init(&val[0]);
- ts=1;
- if (a->neg || BN_ucmp(a,m) >= 0)
- {
- if (!BN_nnmod(&(val[0]),a,m,ctx))
- goto err;
- aa= &(val[0]);
- }
- else
- aa=a;
- if (BN_is_zero(aa))
- {
- ret = BN_zero(rr);
- goto err;
- }
- if (!BN_to_montgomery(&(val[0]),aa,mont,ctx)) goto err; /* 1 */
- window = BN_window_bits_for_exponent_size(bits);
- if (window > 1)
- {
- if (!BN_mod_mul_montgomery(d,&(val[0]),&(val[0]),mont,ctx)) goto err; /* 2 */
- j=1<<(window-1);
- for (i=1; i<j; i++)
- {
- BN_init(&(val[i]));
- if (!BN_mod_mul_montgomery(&(val[i]),&(val[i-1]),d,mont,ctx))
- goto err;
- }
- ts=i;
- }
- start=1; /* This is used to avoid multiplication etc
- * when there is only the value '1' in the
- * buffer. */
- wvalue=0; /* The 'value' of the window */
- wstart=bits-1; /* The top bit of the window */
- wend=0; /* The bottom bit of the window */
- if (!BN_to_montgomery(r,BN_value_one(),mont,ctx)) goto err;
- for (;;)
- {
- if (BN_is_bit_set(p,wstart) == 0)
- {
- if (!start)
- {
- if (!BN_mod_mul_montgomery(r,r,r,mont,ctx))
- goto err;
- }
- if (wstart == 0) break;
- wstart--;
- continue;
- }
- /* We now have wstart on a 'set' bit, we now need to work out
- * how bit a window to do. To do this we need to scan
- * forward until the last set bit before the end of the
- * window */
- j=wstart;
- wvalue=1;
- wend=0;
- for (i=1; i<window; i++)
- {
- if (wstart-i < 0) break;
- if (BN_is_bit_set(p,wstart-i))
- {
- wvalue<<=(i-wend);
- wvalue|=1;
- wend=i;
- }
- }
- /* wend is the size of the current window */
- j=wend+1;
- /* add the 'bytes above' */
- if (!start)
- for (i=0; i<j; i++)
- {
- if (!BN_mod_mul_montgomery(r,r,r,mont,ctx))
- goto err;
- }
-
- /* wvalue will be an odd number < 2^window */
- if (!BN_mod_mul_montgomery(r,r,&(val[wvalue>>1]),mont,ctx))
- goto err;
- /* move the 'window' down further */
- wstart-=wend+1;
- wvalue=0;
- start=0;
- if (wstart < 0) break;
- }
- if (!BN_from_montgomery(rr,r,mont,ctx)) goto err;
- ret=1;
- err:
- if ((in_mont == NULL) && (mont != NULL)) BN_MONT_CTX_free(mont);
- BN_CTX_end(ctx);
- for (i=0; i<ts; i++)
- BN_clear_free(&(val[i]));
- return(ret);
- }
- int BN_mod_exp_mont_word(BIGNUM *rr, BN_ULONG a, const BIGNUM *p,
- const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *in_mont)
- {
- BN_MONT_CTX *mont = NULL;
- int b, bits, ret=0;
- int r_is_one;
- BN_ULONG w, next_w;
- BIGNUM *d, *r, *t;
- BIGNUM *swap_tmp;
- #define BN_MOD_MUL_WORD(r, w, m) \
- (BN_mul_word(r, (w)) && \
- (/* BN_ucmp(r, (m)) < 0 ? 1 :*/ \
- (BN_mod(t, r, m, ctx) && (swap_tmp = r, r = t, t = swap_tmp, 1))))
- /* BN_MOD_MUL_WORD is only used with 'w' large,
- * so the BN_ucmp test is probably more overhead
- * than always using BN_mod (which uses BN_copy if
- * a similar test returns true). */
- /* We can use BN_mod and do not need BN_nnmod because our
- * accumulator is never negative (the result of BN_mod does
- * not depend on the sign of the modulus).
- */
- #define BN_TO_MONTGOMERY_WORD(r, w, mont) \
- (BN_set_word(r, (w)) && BN_to_montgomery(r, r, (mont), ctx))
- bn_check_top(p);
- bn_check_top(m);
- if (m->top == 0 || !(m->d[0] & 1))
- {
- BNerr(BN_F_BN_MOD_EXP_MONT_WORD,BN_R_CALLED_WITH_EVEN_MODULUS);
- return(0);
- }
- if (m->top == 1)
- a %= m->d[0]; /* make sure that 'a' is reduced */
- bits = BN_num_bits(p);
- if (bits == 0)
- {
- ret = BN_one(rr);
- return ret;
- }
- if (a == 0)
- {
- ret = BN_zero(rr);
- return ret;
- }
- BN_CTX_start(ctx);
- d = BN_CTX_get(ctx);
- r = BN_CTX_get(ctx);
- t = BN_CTX_get(ctx);
- if (d == NULL || r == NULL || t == NULL) goto err;
- if (in_mont != NULL)
- mont=in_mont;
- else
- {
- if ((mont = BN_MONT_CTX_new()) == NULL) goto err;
- if (!BN_MONT_CTX_set(mont, m, ctx)) goto err;
- }
- r_is_one = 1; /* except for Montgomery factor */
- /* bits-1 >= 0 */
- /* The result is accumulated in the product r*w. */
- w = a; /* bit 'bits-1' of 'p' is always set */
- for (b = bits-2; b >= 0; b--)
- {
- /* First, square r*w. */
- next_w = w*w;
- if ((next_w/w) != w) /* overflow */
- {
- if (r_is_one)
- {
- if (!BN_TO_MONTGOMERY_WORD(r, w, mont)) goto err;
- r_is_one = 0;
- }
- else
- {
- if (!BN_MOD_MUL_WORD(r, w, m)) goto err;
- }
- next_w = 1;
- }
- w = next_w;
- if (!r_is_one)
- {
- if (!BN_mod_mul_montgomery(r, r, r, mont, ctx)) goto err;
- }
- /* Second, multiply r*w by 'a' if exponent bit is set. */
- if (BN_is_bit_set(p, b))
- {
- next_w = w*a;
- if ((next_w/a) != w) /* overflow */
- {
- if (r_is_one)
- {
- if (!BN_TO_MONTGOMERY_WORD(r, w, mont)) goto err;
- r_is_one = 0;
- }
- else
- {
- if (!BN_MOD_MUL_WORD(r, w, m)) goto err;
- }
- next_w = a;
- }
- w = next_w;
- }
- }
- /* Finally, set r:=r*w. */
- if (w != 1)
- {
- if (r_is_one)
- {
- if (!BN_TO_MONTGOMERY_WORD(r, w, mont)) goto err;
- r_is_one = 0;
- }
- else
- {
- if (!BN_MOD_MUL_WORD(r, w, m)) goto err;
- }
- }
- if (r_is_one) /* can happen only if a == 1*/
- {
- if (!BN_one(rr)) goto err;
- }
- else
- {
- if (!BN_from_montgomery(rr, r, mont, ctx)) goto err;
- }
- ret = 1;
- err:
- if ((in_mont == NULL) && (mont != NULL)) BN_MONT_CTX_free(mont);
- BN_CTX_end(ctx);
- return(ret);
- }
- /* The old fallback, simple version :-) */
- int BN_mod_exp_simple(BIGNUM *r,
- const BIGNUM *a, const BIGNUM *p, const BIGNUM *m,
- BN_CTX *ctx)
- {
- int i,j,bits,ret=0,wstart,wend,window,wvalue,ts=0;
- int start=1;
- BIGNUM *d;
- BIGNUM val[TABLE_SIZE];
- bits=BN_num_bits(p);
- if (bits == 0)
- {
- ret = BN_one(r);
- return ret;
- }
- BN_CTX_start(ctx);
- if ((d = BN_CTX_get(ctx)) == NULL) goto err;
- BN_init(&(val[0]));
- ts=1;
- if (!BN_nnmod(&(val[0]),a,m,ctx)) goto err; /* 1 */
- if (BN_is_zero(&(val[0])))
- {
- ret = BN_zero(r);
- goto err;
- }
- window = BN_window_bits_for_exponent_size(bits);
- if (window > 1)
- {
- if (!BN_mod_mul(d,&(val[0]),&(val[0]),m,ctx))
- goto err; /* 2 */
- j=1<<(window-1);
- for (i=1; i<j; i++)
- {
- BN_init(&(val[i]));
- if (!BN_mod_mul(&(val[i]),&(val[i-1]),d,m,ctx))
- goto err;
- }
- ts=i;
- }
- start=1; /* This is used to avoid multiplication etc
- * when there is only the value '1' in the
- * buffer. */
- wvalue=0; /* The 'value' of the window */
- wstart=bits-1; /* The top bit of the window */
- wend=0; /* The bottom bit of the window */
- if (!BN_one(r)) goto err;
- for (;;)
- {
- if (BN_is_bit_set(p,wstart) == 0)
- {
- if (!start)
- if (!BN_mod_mul(r,r,r,m,ctx))
- goto err;
- if (wstart == 0) break;
- wstart--;
- continue;
- }
- /* We now have wstart on a 'set' bit, we now need to work out
- * how bit a window to do. To do this we need to scan
- * forward until the last set bit before the end of the
- * window */
- j=wstart;
- wvalue=1;
- wend=0;
- for (i=1; i<window; i++)
- {
- if (wstart-i < 0) break;
- if (BN_is_bit_set(p,wstart-i))
- {
- wvalue<<=(i-wend);
- wvalue|=1;
- wend=i;
- }
- }
- /* wend is the size of the current window */
- j=wend+1;
- /* add the 'bytes above' */
- if (!start)
- for (i=0; i<j; i++)
- {
- if (!BN_mod_mul(r,r,r,m,ctx))
- goto err;
- }
-
- /* wvalue will be an odd number < 2^window */
- if (!BN_mod_mul(r,r,&(val[wvalue>>1]),m,ctx))
- goto err;
- /* move the 'window' down further */
- wstart-=wend+1;
- wvalue=0;
- start=0;
- if (wstart < 0) break;
- }
- ret=1;
- err:
- BN_CTX_end(ctx);
- for (i=0; i<ts; i++)
- BN_clear_free(&(val[i]));
- return(ret);
- }
|