md2_dgst.c 7.8 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224
  1. /* crypto/md2/md2_dgst.c */
  2. /* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
  3. * All rights reserved.
  4. *
  5. * This package is an SSL implementation written
  6. * by Eric Young (eay@cryptsoft.com).
  7. * The implementation was written so as to conform with Netscapes SSL.
  8. *
  9. * This library is free for commercial and non-commercial use as long as
  10. * the following conditions are aheared to. The following conditions
  11. * apply to all code found in this distribution, be it the RC4, RSA,
  12. * lhash, DES, etc., code; not just the SSL code. The SSL documentation
  13. * included with this distribution is covered by the same copyright terms
  14. * except that the holder is Tim Hudson (tjh@cryptsoft.com).
  15. *
  16. * Copyright remains Eric Young's, and as such any Copyright notices in
  17. * the code are not to be removed.
  18. * If this package is used in a product, Eric Young should be given attribution
  19. * as the author of the parts of the library used.
  20. * This can be in the form of a textual message at program startup or
  21. * in documentation (online or textual) provided with the package.
  22. *
  23. * Redistribution and use in source and binary forms, with or without
  24. * modification, are permitted provided that the following conditions
  25. * are met:
  26. * 1. Redistributions of source code must retain the copyright
  27. * notice, this list of conditions and the following disclaimer.
  28. * 2. Redistributions in binary form must reproduce the above copyright
  29. * notice, this list of conditions and the following disclaimer in the
  30. * documentation and/or other materials provided with the distribution.
  31. * 3. All advertising materials mentioning features or use of this software
  32. * must display the following acknowledgement:
  33. * "This product includes cryptographic software written by
  34. * Eric Young (eay@cryptsoft.com)"
  35. * The word 'cryptographic' can be left out if the rouines from the library
  36. * being used are not cryptographic related :-).
  37. * 4. If you include any Windows specific code (or a derivative thereof) from
  38. * the apps directory (application code) you must include an acknowledgement:
  39. * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
  40. *
  41. * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
  42. * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  43. * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  44. * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
  45. * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  46. * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  47. * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  48. * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  49. * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
  50. * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  51. * SUCH DAMAGE.
  52. *
  53. * The licence and distribution terms for any publically available version or
  54. * derivative of this code cannot be changed. i.e. this code cannot simply be
  55. * copied and put under another distribution licence
  56. * [including the GNU Public Licence.]
  57. */
  58. #include <stdio.h>
  59. #include <stdlib.h>
  60. #include <string.h>
  61. #include <openssl/md2.h>
  62. #include <openssl/opensslv.h>
  63. #include <openssl/crypto.h>
  64. const char MD2_version[] = "MD2" OPENSSL_VERSION_PTEXT;
  65. /*
  66. * Implemented from RFC1319 The MD2 Message-Digest Algorithm
  67. */
  68. #define UCHAR unsigned char
  69. static void md2_block(MD2_CTX *c, const unsigned char *d);
  70. /*
  71. * The magic S table - I have converted it to hex since it is basically just
  72. * a random byte string.
  73. */
  74. static const MD2_INT S[256] = {
  75. 0x29, 0x2E, 0x43, 0xC9, 0xA2, 0xD8, 0x7C, 0x01,
  76. 0x3D, 0x36, 0x54, 0xA1, 0xEC, 0xF0, 0x06, 0x13,
  77. 0x62, 0xA7, 0x05, 0xF3, 0xC0, 0xC7, 0x73, 0x8C,
  78. 0x98, 0x93, 0x2B, 0xD9, 0xBC, 0x4C, 0x82, 0xCA,
  79. 0x1E, 0x9B, 0x57, 0x3C, 0xFD, 0xD4, 0xE0, 0x16,
  80. 0x67, 0x42, 0x6F, 0x18, 0x8A, 0x17, 0xE5, 0x12,
  81. 0xBE, 0x4E, 0xC4, 0xD6, 0xDA, 0x9E, 0xDE, 0x49,
  82. 0xA0, 0xFB, 0xF5, 0x8E, 0xBB, 0x2F, 0xEE, 0x7A,
  83. 0xA9, 0x68, 0x79, 0x91, 0x15, 0xB2, 0x07, 0x3F,
  84. 0x94, 0xC2, 0x10, 0x89, 0x0B, 0x22, 0x5F, 0x21,
  85. 0x80, 0x7F, 0x5D, 0x9A, 0x5A, 0x90, 0x32, 0x27,
  86. 0x35, 0x3E, 0xCC, 0xE7, 0xBF, 0xF7, 0x97, 0x03,
  87. 0xFF, 0x19, 0x30, 0xB3, 0x48, 0xA5, 0xB5, 0xD1,
  88. 0xD7, 0x5E, 0x92, 0x2A, 0xAC, 0x56, 0xAA, 0xC6,
  89. 0x4F, 0xB8, 0x38, 0xD2, 0x96, 0xA4, 0x7D, 0xB6,
  90. 0x76, 0xFC, 0x6B, 0xE2, 0x9C, 0x74, 0x04, 0xF1,
  91. 0x45, 0x9D, 0x70, 0x59, 0x64, 0x71, 0x87, 0x20,
  92. 0x86, 0x5B, 0xCF, 0x65, 0xE6, 0x2D, 0xA8, 0x02,
  93. 0x1B, 0x60, 0x25, 0xAD, 0xAE, 0xB0, 0xB9, 0xF6,
  94. 0x1C, 0x46, 0x61, 0x69, 0x34, 0x40, 0x7E, 0x0F,
  95. 0x55, 0x47, 0xA3, 0x23, 0xDD, 0x51, 0xAF, 0x3A,
  96. 0xC3, 0x5C, 0xF9, 0xCE, 0xBA, 0xC5, 0xEA, 0x26,
  97. 0x2C, 0x53, 0x0D, 0x6E, 0x85, 0x28, 0x84, 0x09,
  98. 0xD3, 0xDF, 0xCD, 0xF4, 0x41, 0x81, 0x4D, 0x52,
  99. 0x6A, 0xDC, 0x37, 0xC8, 0x6C, 0xC1, 0xAB, 0xFA,
  100. 0x24, 0xE1, 0x7B, 0x08, 0x0C, 0xBD, 0xB1, 0x4A,
  101. 0x78, 0x88, 0x95, 0x8B, 0xE3, 0x63, 0xE8, 0x6D,
  102. 0xE9, 0xCB, 0xD5, 0xFE, 0x3B, 0x00, 0x1D, 0x39,
  103. 0xF2, 0xEF, 0xB7, 0x0E, 0x66, 0x58, 0xD0, 0xE4,
  104. 0xA6, 0x77, 0x72, 0xF8, 0xEB, 0x75, 0x4B, 0x0A,
  105. 0x31, 0x44, 0x50, 0xB4, 0x8F, 0xED, 0x1F, 0x1A,
  106. 0xDB, 0x99, 0x8D, 0x33, 0x9F, 0x11, 0x83, 0x14,
  107. };
  108. const char *MD2_options(void)
  109. {
  110. if (sizeof(MD2_INT) == 1)
  111. return ("md2(char)");
  112. else
  113. return ("md2(int)");
  114. }
  115. int MD2_Init(MD2_CTX *c)
  116. {
  117. c->num = 0;
  118. memset(c->state, 0, sizeof c->state);
  119. memset(c->cksm, 0, sizeof c->cksm);
  120. memset(c->data, 0, sizeof c->data);
  121. return 1;
  122. }
  123. int MD2_Update(MD2_CTX *c, const unsigned char *data, size_t len)
  124. {
  125. register UCHAR *p;
  126. if (len == 0)
  127. return 1;
  128. p = c->data;
  129. if (c->num != 0) {
  130. if ((c->num + len) >= MD2_BLOCK) {
  131. memcpy(&(p[c->num]), data, MD2_BLOCK - c->num);
  132. md2_block(c, c->data);
  133. data += (MD2_BLOCK - c->num);
  134. len -= (MD2_BLOCK - c->num);
  135. c->num = 0;
  136. /* drop through and do the rest */
  137. } else {
  138. memcpy(&(p[c->num]), data, len);
  139. /* data+=len; */
  140. c->num += (int)len;
  141. return 1;
  142. }
  143. }
  144. /*
  145. * we now can process the input data in blocks of MD2_BLOCK chars and
  146. * save the leftovers to c->data.
  147. */
  148. while (len >= MD2_BLOCK) {
  149. md2_block(c, data);
  150. data += MD2_BLOCK;
  151. len -= MD2_BLOCK;
  152. }
  153. memcpy(p, data, len);
  154. c->num = (int)len;
  155. return 1;
  156. }
  157. static void md2_block(MD2_CTX *c, const unsigned char *d)
  158. {
  159. register MD2_INT t, *sp1, *sp2;
  160. register int i, j;
  161. MD2_INT state[48];
  162. sp1 = c->state;
  163. sp2 = c->cksm;
  164. j = sp2[MD2_BLOCK - 1];
  165. for (i = 0; i < 16; i++) {
  166. state[i] = sp1[i];
  167. state[i + 16] = t = d[i];
  168. state[i + 32] = (t ^ sp1[i]);
  169. j = sp2[i] ^= S[t ^ j];
  170. }
  171. t = 0;
  172. for (i = 0; i < 18; i++) {
  173. for (j = 0; j < 48; j += 8) {
  174. t = state[j + 0] ^= S[t];
  175. t = state[j + 1] ^= S[t];
  176. t = state[j + 2] ^= S[t];
  177. t = state[j + 3] ^= S[t];
  178. t = state[j + 4] ^= S[t];
  179. t = state[j + 5] ^= S[t];
  180. t = state[j + 6] ^= S[t];
  181. t = state[j + 7] ^= S[t];
  182. }
  183. t = (t + i) & 0xff;
  184. }
  185. memcpy(sp1, state, 16 * sizeof(MD2_INT));
  186. OPENSSL_cleanse(state, 48 * sizeof(MD2_INT));
  187. }
  188. int MD2_Final(unsigned char *md, MD2_CTX *c)
  189. {
  190. int i, v;
  191. register UCHAR *cp;
  192. register MD2_INT *p1, *p2;
  193. cp = c->data;
  194. p1 = c->state;
  195. p2 = c->cksm;
  196. v = MD2_BLOCK - c->num;
  197. for (i = c->num; i < MD2_BLOCK; i++)
  198. cp[i] = (UCHAR) v;
  199. md2_block(c, cp);
  200. for (i = 0; i < MD2_BLOCK; i++)
  201. cp[i] = (UCHAR) p2[i];
  202. md2_block(c, cp);
  203. for (i = 0; i < 16; i++)
  204. md[i] = (UCHAR) (p1[i] & 0xff);
  205. memset((char *)&c, 0, sizeof(c));
  206. return 1;
  207. }