rc2speed.c 7.6 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274
  1. /* crypto/rc2/rc2speed.c */
  2. /* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
  3. * All rights reserved.
  4. *
  5. * This package is an SSL implementation written
  6. * by Eric Young (eay@cryptsoft.com).
  7. * The implementation was written so as to conform with Netscapes SSL.
  8. *
  9. * This library is free for commercial and non-commercial use as long as
  10. * the following conditions are aheared to. The following conditions
  11. * apply to all code found in this distribution, be it the RC4, RSA,
  12. * lhash, DES, etc., code; not just the SSL code. The SSL documentation
  13. * included with this distribution is covered by the same copyright terms
  14. * except that the holder is Tim Hudson (tjh@cryptsoft.com).
  15. *
  16. * Copyright remains Eric Young's, and as such any Copyright notices in
  17. * the code are not to be removed.
  18. * If this package is used in a product, Eric Young should be given attribution
  19. * as the author of the parts of the library used.
  20. * This can be in the form of a textual message at program startup or
  21. * in documentation (online or textual) provided with the package.
  22. *
  23. * Redistribution and use in source and binary forms, with or without
  24. * modification, are permitted provided that the following conditions
  25. * are met:
  26. * 1. Redistributions of source code must retain the copyright
  27. * notice, this list of conditions and the following disclaimer.
  28. * 2. Redistributions in binary form must reproduce the above copyright
  29. * notice, this list of conditions and the following disclaimer in the
  30. * documentation and/or other materials provided with the distribution.
  31. * 3. All advertising materials mentioning features or use of this software
  32. * must display the following acknowledgement:
  33. * "This product includes cryptographic software written by
  34. * Eric Young (eay@cryptsoft.com)"
  35. * The word 'cryptographic' can be left out if the rouines from the library
  36. * being used are not cryptographic related :-).
  37. * 4. If you include any Windows specific code (or a derivative thereof) from
  38. * the apps directory (application code) you must include an acknowledgement:
  39. * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
  40. *
  41. * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
  42. * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  43. * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  44. * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
  45. * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  46. * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  47. * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  48. * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  49. * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
  50. * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  51. * SUCH DAMAGE.
  52. *
  53. * The licence and distribution terms for any publically available version or
  54. * derivative of this code cannot be changed. i.e. this code cannot simply be
  55. * copied and put under another distribution licence
  56. * [including the GNU Public Licence.]
  57. */
  58. /* 11-Sep-92 Andrew Daviel Support for Silicon Graphics IRIX added */
  59. /* 06-Apr-92 Luke Brennan Support for VMS and add extra signal calls */
  60. #if !defined(OPENSSL_SYS_MSDOS) && (!defined(OPENSSL_SYS_VMS) || defined(__DECC))
  61. #define TIMES
  62. #endif
  63. #include <stdio.h>
  64. #include <openssl/e_os2.h>
  65. #include OPENSSL_UNISTD_IO
  66. OPENSSL_DECLARE_EXIT
  67. #include <signal.h>
  68. #ifndef _IRIX
  69. #include <time.h>
  70. #endif
  71. #ifdef TIMES
  72. #include <sys/types.h>
  73. #include <sys/times.h>
  74. #endif
  75. /* Depending on the VMS version, the tms structure is perhaps defined.
  76. The __TMS macro will show if it was. If it wasn't defined, we should
  77. undefine TIMES, since that tells the rest of the program how things
  78. should be handled. -- Richard Levitte */
  79. #if defined(OPENSSL_SYS_VMS_DECC) && !defined(__TMS)
  80. #undef TIMES
  81. #endif
  82. #ifndef TIMES
  83. #include <sys/timeb.h>
  84. #endif
  85. #if defined(sun) || defined(__ultrix)
  86. #define _POSIX_SOURCE
  87. #include <limits.h>
  88. #include <sys/param.h>
  89. #endif
  90. #include <openssl/rc2.h>
  91. /* The following if from times(3) man page. It may need to be changed */
  92. #ifndef HZ
  93. #ifndef CLK_TCK
  94. #define HZ 100.0
  95. #endif
  96. #else /* CLK_TCK */
  97. #define HZ ((double)CLK_TCK)
  98. #endif
  99. #define BUFSIZE ((long)1024)
  100. long run=0;
  101. double Time_F(int s);
  102. #ifdef SIGALRM
  103. #if defined(__STDC__) || defined(sgi) || defined(_AIX)
  104. #define SIGRETTYPE void
  105. #else
  106. #define SIGRETTYPE int
  107. #endif
  108. SIGRETTYPE sig_done(int sig);
  109. SIGRETTYPE sig_done(int sig)
  110. {
  111. signal(SIGALRM,sig_done);
  112. run=0;
  113. #ifdef LINT
  114. sig=sig;
  115. #endif
  116. }
  117. #endif
  118. #define START 0
  119. #define STOP 1
  120. double Time_F(int s)
  121. {
  122. double ret;
  123. #ifdef TIMES
  124. static struct tms tstart,tend;
  125. if (s == START)
  126. {
  127. times(&tstart);
  128. return(0);
  129. }
  130. else
  131. {
  132. times(&tend);
  133. ret=((double)(tend.tms_utime-tstart.tms_utime))/HZ;
  134. return((ret == 0.0)?1e-6:ret);
  135. }
  136. #else /* !times() */
  137. static struct timeb tstart,tend;
  138. long i;
  139. if (s == START)
  140. {
  141. ftime(&tstart);
  142. return(0);
  143. }
  144. else
  145. {
  146. ftime(&tend);
  147. i=(long)tend.millitm-(long)tstart.millitm;
  148. ret=((double)(tend.time-tstart.time))+((double)i)/1e3;
  149. return((ret == 0.0)?1e-6:ret);
  150. }
  151. #endif
  152. }
  153. int main(int argc, char **argv)
  154. {
  155. long count;
  156. static unsigned char buf[BUFSIZE];
  157. static unsigned char key[] ={
  158. 0x12,0x34,0x56,0x78,0x9a,0xbc,0xde,0xf0,
  159. 0xfe,0xdc,0xba,0x98,0x76,0x54,0x32,0x10,
  160. };
  161. RC2_KEY sch;
  162. double a,b,c,d;
  163. #ifndef SIGALRM
  164. long ca,cb,cc;
  165. #endif
  166. #ifndef TIMES
  167. printf("To get the most accurate results, try to run this\n");
  168. printf("program when this computer is idle.\n");
  169. #endif
  170. #ifndef SIGALRM
  171. printf("First we calculate the approximate speed ...\n");
  172. RC2_set_key(&sch,16,key,128);
  173. count=10;
  174. do {
  175. long i;
  176. unsigned long data[2];
  177. count*=2;
  178. Time_F(START);
  179. for (i=count; i; i--)
  180. RC2_encrypt(data,&sch);
  181. d=Time_F(STOP);
  182. } while (d < 3.0);
  183. ca=count/512;
  184. cb=count;
  185. cc=count*8/BUFSIZE+1;
  186. printf("Doing RC2_set_key %ld times\n",ca);
  187. #define COND(d) (count != (d))
  188. #define COUNT(d) (d)
  189. #else
  190. #define COND(c) (run)
  191. #define COUNT(d) (count)
  192. signal(SIGALRM,sig_done);
  193. printf("Doing RC2_set_key for 10 seconds\n");
  194. alarm(10);
  195. #endif
  196. Time_F(START);
  197. for (count=0,run=1; COND(ca); count+=4)
  198. {
  199. RC2_set_key(&sch,16,key,128);
  200. RC2_set_key(&sch,16,key,128);
  201. RC2_set_key(&sch,16,key,128);
  202. RC2_set_key(&sch,16,key,128);
  203. }
  204. d=Time_F(STOP);
  205. printf("%ld RC2_set_key's in %.2f seconds\n",count,d);
  206. a=((double)COUNT(ca))/d;
  207. #ifdef SIGALRM
  208. printf("Doing RC2_encrypt's for 10 seconds\n");
  209. alarm(10);
  210. #else
  211. printf("Doing RC2_encrypt %ld times\n",cb);
  212. #endif
  213. Time_F(START);
  214. for (count=0,run=1; COND(cb); count+=4)
  215. {
  216. unsigned long data[2];
  217. RC2_encrypt(data,&sch);
  218. RC2_encrypt(data,&sch);
  219. RC2_encrypt(data,&sch);
  220. RC2_encrypt(data,&sch);
  221. }
  222. d=Time_F(STOP);
  223. printf("%ld RC2_encrypt's in %.2f second\n",count,d);
  224. b=((double)COUNT(cb)*8)/d;
  225. #ifdef SIGALRM
  226. printf("Doing RC2_cbc_encrypt on %ld byte blocks for 10 seconds\n",
  227. BUFSIZE);
  228. alarm(10);
  229. #else
  230. printf("Doing RC2_cbc_encrypt %ld times on %ld byte blocks\n",cc,
  231. BUFSIZE);
  232. #endif
  233. Time_F(START);
  234. for (count=0,run=1; COND(cc); count++)
  235. RC2_cbc_encrypt(buf,buf,BUFSIZE,&sch,
  236. &(key[0]),RC2_ENCRYPT);
  237. d=Time_F(STOP);
  238. printf("%ld RC2_cbc_encrypt's of %ld byte blocks in %.2f second\n",
  239. count,BUFSIZE,d);
  240. c=((double)COUNT(cc)*BUFSIZE)/d;
  241. printf("RC2 set_key per sec = %12.2f (%9.3fuS)\n",a,1.0e6/a);
  242. printf("RC2 raw ecb bytes per sec = %12.2f (%9.3fuS)\n",b,8.0e6/b);
  243. printf("RC2 cbc bytes per sec = %12.2f (%9.3fuS)\n",c,8.0e6/c);
  244. exit(0);
  245. #if defined(LINT) || defined(OPENSSL_SYS_MSDOS)
  246. return(0);
  247. #endif
  248. }