123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572 |
- #! /usr/bin/env perl
- # Copyright 2015-2020 The OpenSSL Project Authors. All Rights Reserved.
- #
- # Licensed under the Apache License 2.0 (the "License"). You may not use
- # this file except in compliance with the License. You can obtain a copy
- # in the file LICENSE in the source distribution or at
- # https://www.openssl.org/source/license.html
- use strict;
- use warnings;
- use POSIX;
- use File::Basename;
- use File::Copy;
- use OpenSSL::Test qw/:DEFAULT with bldtop_file bldtop_dir srctop_file srctop_dir cmdstr/;
- use OpenSSL::Test::Utils;
- BEGIN {
- setup("test_ssl");
- }
- use lib srctop_dir('Configurations');
- use lib bldtop_dir('.');
- use platform;
- my $no_fips = disabled('fips') || ($ENV{NO_FIPS} // 0);
- my $infile = bldtop_file('providers', platform->dso('fips'));
- my ($no_rsa, $no_dsa, $no_dh, $no_ec, $no_psk,
- $no_ssl3, $no_tls1, $no_tls1_1, $no_tls1_2, $no_tls1_3,
- $no_dtls, $no_dtls1, $no_dtls1_2, $no_ct) =
- anydisabled qw/rsa dsa dh ec psk
- ssl3 tls1 tls1_1 tls1_2 tls1_3
- dtls dtls1 dtls1_2 ct/;
- my $no_anytls = alldisabled(available_protocols("tls"));
- my $no_anydtls = alldisabled(available_protocols("dtls"));
- plan skip_all => "No SSL/TLS/DTLS protocol is support by this OpenSSL build"
- if $no_anytls && $no_anydtls;
- my $digest = "-sha1";
- my @reqcmd = ("openssl", "req");
- my @x509cmd = ("openssl", "x509", $digest);
- my @verifycmd = ("openssl", "verify");
- my @genpkeycmd = ("openssl", "genpkey");
- my $dummycnf = srctop_file("apps", "openssl.cnf");
- my $cnf = srctop_file("test", "ca-and-certs.cnf");
- my $CAkey = "keyCA.ss";
- my $CAcert="certCA.ss";
- my $CAserial="certCA.srl";
- my $CAreq="reqCA.ss";
- my $CAreq2="req2CA.ss"; # temp
- my $Ukey="keyU.ss";
- my $Ureq="reqU.ss";
- my $Ucert="certU.ss";
- my $Dkey="keyD.ss";
- my $Dreq="reqD.ss";
- my $Dcert="certD.ss";
- my $Ekey="keyE.ss";
- my $Ereq="reqE.ss";
- my $Ecert="certE.ss";
- my $proxycnf=srctop_file("test", "proxy.cnf");
- my $P1key="keyP1.ss";
- my $P1req="reqP1.ss";
- my $P1cert="certP1.ss";
- my $P1intermediate="tmp_intP1.ss";
- my $P2key="keyP2.ss";
- my $P2req="reqP2.ss";
- my $P2cert="certP2.ss";
- my $P2intermediate="tmp_intP2.ss";
- my $server_sess="server.ss";
- my $client_sess="client.ss";
- # ssltest_old.c is deprecated in favour of the new framework in ssl_test.c
- # If you're adding tests here, you probably want to convert them to the
- # new format in ssl_test.c and add recipes to 80-test_ssl_new.t instead.
- plan tests =>
- ($no_fips ? 0 : 1 + 5) # For fipsinstall + testssl with fips provider
- + 1 # For testss
- + 5 # For the testssl with default provider
- ;
- unless ($no_fips) {
- ok(run(app(['openssl', 'fipsinstall',
- '-out', bldtop_file('providers', 'fipsmodule.cnf'),
- '-module', $infile])),
- "fipsinstall");
- }
- subtest 'test_ss' => sub {
- if (testss()) {
- open OUT, ">", "intP1.ss";
- copy($CAcert, \*OUT); copy($Ucert, \*OUT);
- close OUT;
- open OUT, ">", "intP2.ss";
- copy($CAcert, \*OUT); copy($Ucert, \*OUT); copy($P1cert, \*OUT);
- close OUT;
- }
- };
- note('test_ssl -- key U');
- testssl("keyU.ss", $Ucert, $CAcert, "default", srctop_file("test","default.cnf"));
- unless ($no_fips) {
- testssl("keyU.ss", $Ucert, $CAcert, "fips",
- srctop_file("test","fips-and-base.cnf"));
- }
- # -----------
- # subtest functions
- sub testss {
- my @req_dsa = ("-newkey",
- "dsa:".srctop_file("apps", "dsa1024.pem"));
- my $dsaparams = srctop_file("apps", "dsa1024.pem");
- my @req_new;
- if ($no_rsa) {
- @req_new = @req_dsa;
- } else {
- @req_new = ("-new");
- }
- plan tests => 17;
- SKIP: {
- skip 'failure', 16 unless
- ok(run(app([@reqcmd, "-config", $cnf,
- "-out", $CAreq, "-keyout", $CAkey,
- @req_new])),
- 'make cert request');
- skip 'failure', 15 unless
- ok(run(app([@x509cmd, "-CAcreateserial", "-in", $CAreq, "-days", "30",
- "-req", "-out", $CAcert, "-signkey", $CAkey,
- "-extfile", $cnf, "-extensions", "v3_ca"],
- stdout => "err.ss")),
- 'convert request into self-signed cert');
- skip 'failure', 14 unless
- ok(run(app([@x509cmd, "-in", $CAcert,
- "-x509toreq", "-signkey", $CAkey, "-out", $CAreq2],
- stdout => "err.ss")),
- 'convert cert into a cert request');
- skip 'failure', 13 unless
- ok(run(app([@reqcmd, "-config", $dummycnf,
- "-verify", "-in", $CAreq, "-noout"])),
- 'verify request 1');
- skip 'failure', 12 unless
- ok(run(app([@reqcmd, "-config", $dummycnf,
- "-verify", "-in", $CAreq2, "-noout"])),
- 'verify request 2');
- skip 'failure', 11 unless
- ok(run(app([@verifycmd, "-CAfile", $CAcert, $CAcert])),
- 'verify signature');
- skip 'failure', 10 unless
- ok(run(app([@reqcmd, "-config", $cnf, "-section", "userreq",
- "-out", $Ureq, "-keyout", $Ukey, @req_new],
- stdout => "err.ss")),
- 'make a user cert request');
- skip 'failure', 9 unless
- ok(run(app([@x509cmd, "-CAcreateserial", "-in", $Ureq, "-days", "30",
- "-req", "-out", $Ucert,
- "-CA", $CAcert, "-CAkey", $CAkey, "-CAserial", $CAserial,
- "-extfile", $cnf, "-extensions", "v3_ee"],
- stdout => "err.ss"))
- && run(app([@verifycmd, "-CAfile", $CAcert, $Ucert])),
- 'sign user cert request');
- skip 'failure', 8 unless
- ok(run(app([@x509cmd,
- "-subject", "-issuer", "-startdate", "-enddate",
- "-noout", "-in", $Ucert])),
- 'Certificate details');
- skip 'failure', 7 unless
- subtest 'DSA certificate creation' => sub {
- plan skip_all => "skipping DSA certificate creation"
- if $no_dsa;
- plan tests => 5;
- SKIP: {
- $ENV{CN2} = "DSA Certificate";
- skip 'failure', 4 unless
- ok(run(app([@genpkeycmd, "-out", $Dkey,
- "-paramfile", $dsaparams],
- stdout => "err.ss")),
- "make a DSA key");
- skip 'failure', 3 unless
- ok(run(app([@reqcmd, "-new", "-config", $cnf,
- "-section", "userreq",
- "-out", $Dreq, "-key", $Dkey],
- stdout => "err.ss")),
- "make a DSA user cert request");
- skip 'failure', 2 unless
- ok(run(app([@x509cmd, "-CAcreateserial",
- "-in", $Dreq,
- "-days", "30",
- "-req",
- "-out", $Dcert,
- "-CA", $CAcert, "-CAkey", $CAkey,
- "-CAserial", $CAserial,
- "-extfile", $cnf,
- "-extensions", "v3_ee_dsa"],
- stdout => "err.ss")),
- "sign DSA user cert request");
- skip 'failure', 1 unless
- ok(run(app([@verifycmd, "-CAfile", $CAcert, $Dcert])),
- "verify DSA user cert");
- skip 'failure', 0 unless
- ok(run(app([@x509cmd,
- "-subject", "-issuer",
- "-startdate", "-enddate", "-noout",
- "-in", $Dcert])),
- "DSA Certificate details");
- }
- };
- skip 'failure', 6 unless
- subtest 'ECDSA/ECDH certificate creation' => sub {
- plan skip_all => "skipping ECDSA/ECDH certificate creation"
- if $no_ec;
- plan tests => 5;
- SKIP: {
- $ENV{CN2} = "ECDSA Certificate";
- skip 'failure', 4 unless
- ok(run(app(["openssl", "genpkey", "-genparam",
- "-algorithm", "EC",
- "-pkeyopt", "ec_paramgen_curve:P-256",
- "-pkeyopt", "ec_param_enc:named_curve",
- "-out", "ecp.ss"])),
- "make EC parameters");
- skip 'failure', 3 unless
- ok(run(app([@reqcmd, "-config", $cnf,
- "-section", "userreq",
- "-out", $Ereq, "-keyout", $Ekey,
- "-newkey", "ec:ecp.ss"],
- stdout => "err.ss")),
- "make a ECDSA/ECDH user cert request");
- skip 'failure', 2 unless
- ok(run(app([@x509cmd, "-CAcreateserial",
- "-in", $Ereq,
- "-days", "30",
- "-req",
- "-out", $Ecert,
- "-CA", $CAcert, "-CAkey", $CAkey,
- "-CAserial", $CAserial,
- "-extfile", $cnf,
- "-extensions", "v3_ee_ec"],
- stdout => "err.ss")),
- "sign ECDSA/ECDH user cert request");
- skip 'failure', 1 unless
- ok(run(app([@verifycmd, "-CAfile", $CAcert, $Ecert])),
- "verify ECDSA/ECDH user cert");
- skip 'failure', 0 unless
- ok(run(app([@x509cmd,
- "-subject", "-issuer",
- "-startdate", "-enddate", "-noout",
- "-in", $Ecert])),
- "ECDSA Certificate details");
- }
- };
- skip 'failure', 5 unless
- ok(run(app([@reqcmd, "-config", $proxycnf,
- "-out", $P1req, "-keyout", $P1key, @req_new],
- stdout => "err.ss")),
- 'make a proxy cert request');
- skip 'failure', 4 unless
- ok(run(app([@x509cmd, "-CAcreateserial", "-in", $P1req, "-days", "30",
- "-req", "-out", $P1cert,
- "-CA", $Ucert, "-CAkey", $Ukey,
- "-extfile", $proxycnf, "-extensions", "proxy"],
- stdout => "err.ss")),
- 'sign proxy with user cert');
- copy($Ucert, $P1intermediate);
- run(app([@verifycmd, "-CAfile", $CAcert,
- "-untrusted", $P1intermediate, $P1cert]));
- ok(run(app([@x509cmd,
- "-subject", "-issuer", "-startdate", "-enddate",
- "-noout", "-in", $P1cert])),
- 'Certificate details');
- skip 'failure', 2 unless
- ok(run(app([@reqcmd, "-config", $proxycnf, "-section", "proxy2_req",
- "-out", $P2req, "-keyout", $P2key,
- @req_new],
- stdout => "err.ss")),
- 'make another proxy cert request');
- skip 'failure', 1 unless
- ok(run(app([@x509cmd, "-CAcreateserial", "-in", $P2req, "-days", "30",
- "-req", "-out", $P2cert,
- "-CA", $P1cert, "-CAkey", $P1key,
- "-extfile", $proxycnf, "-extensions", "proxy_2"],
- stdout => "err.ss")),
- 'sign second proxy cert request with the first proxy cert');
- open OUT, ">", $P2intermediate;
- copy($Ucert, \*OUT); copy($P1cert, \*OUT);
- close OUT;
- run(app([@verifycmd, "-CAfile", $CAcert,
- "-untrusted", $P2intermediate, $P2cert]));
- ok(run(app([@x509cmd,
- "-subject", "-issuer", "-startdate", "-enddate",
- "-noout", "-in", $P2cert])),
- 'Certificate details');
- }
- }
- sub testssl {
- my ($key, $cert, $CAtmp, $provider, $configfile) = @_;
- my @CA = $CAtmp ? ("-CAfile", $CAtmp) : ("-CApath", bldtop_dir("certs"));
- my @ssltest = ("ssltest_old",
- "-s_key", $key, "-s_cert", $cert,
- "-c_key", $key, "-c_cert", $cert,
- "-provider", $provider,
- "-config", $configfile);
- my $serverinfo = srctop_file("test","serverinfo.pem");
- my $dsa_cert = 0;
- if (grep /DSA Public Key/, run(app(["openssl", "x509", "-in", $cert,
- "-text", "-noout"]), capture => 1)) {
- $dsa_cert = 1;
- }
- # plan tests => 11;
- subtest 'standard SSL tests' => sub {
- ######################################################################
- plan tests => 13;
- SKIP: {
- skip "SSLv3 is not supported by this OpenSSL build", 4
- if disabled("ssl3");
- skip "SSLv3 is not supported by the FIPS provider", 4
- if $provider eq "fips";
- ok(run(test([@ssltest, "-bio_pair", "-ssl3"])),
- 'test sslv3 via BIO pair');
- ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-server_auth", @CA])),
- 'test sslv3 with server authentication via BIO pair');
- ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-client_auth", @CA])),
- 'test sslv3 with client authentication via BIO pair');
- ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-server_auth", "-client_auth", @CA])),
- 'test sslv3 with both server and client authentication via BIO pair');
- }
- SKIP: {
- skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", 1
- if $no_anytls;
- ok(run(test([@ssltest, "-bio_pair"])),
- 'test sslv2/sslv3 via BIO pair');
- }
- SKIP: {
- skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", 8
- if $no_anytls;
- SKIP: {
- skip "skipping test of sslv2/sslv3 w/o (EC)DHE test", 1 if $dsa_cert;
- ok(run(test([@ssltest, "-bio_pair", "-no_dhe", "-no_ecdhe"])),
- 'test sslv2/sslv3 w/o (EC)DHE via BIO pair');
- }
- ok(run(test([@ssltest, "-bio_pair", "-dhe1024dsa", "-v"])),
- 'test sslv2/sslv3 with 1024bit DHE via BIO pair');
- ok(run(test([@ssltest, "-bio_pair", "-server_auth", @CA])),
- 'test sslv2/sslv3 with server authentication');
- ok(run(test([@ssltest, "-bio_pair", "-client_auth", @CA])),
- 'test sslv2/sslv3 with client authentication via BIO pair');
- ok(run(test([@ssltest, "-bio_pair", "-server_auth", "-client_auth", @CA])),
- 'test sslv2/sslv3 with both client and server authentication via BIO pair');
- ok(run(test([@ssltest, "-bio_pair", "-server_auth", "-client_auth", "-app_verify", @CA])),
- 'test sslv2/sslv3 with both client and server authentication via BIO pair and app verify');
- SKIP: {
- skip "No IPv4 available on this machine", 1
- unless !disabled("sock") && have_IPv4();
- ok(run(test([@ssltest, "-ipv4"])),
- 'test TLS via IPv4');
- }
- SKIP: {
- skip "No IPv6 available on this machine", 1
- unless !disabled("sock") && have_IPv6();
- ok(run(test([@ssltest, "-ipv6"])),
- 'test TLS via IPv6');
- }
- }
- };
- subtest "Testing ciphersuites" => sub {
- my @exkeys = ();
- my $ciphers = "-PSK:-SRP";
- if (!$no_dsa) {
- push @exkeys, "-s_cert", "certD.ss", "-s_key", "keyD.ss";
- }
- if (!$no_ec) {
- push @exkeys, "-s_cert", "certE.ss", "-s_key", "keyE.ss";
- }
- my @protocols = ();
- # We only use the flags that ssltest_old understands
- push @protocols, "-tls1_3" unless $no_tls1_3;
- push @protocols, "-tls1_2" unless $no_tls1_2;
- push @protocols, "-tls1" unless $no_tls1 || $provider eq "fips";
- push @protocols, "-ssl3" unless $no_ssl3 || $provider eq "fips";
- my $protocolciphersuitecount = 0;
- my %ciphersuites = ();
- my %ciphersstatus = ();
- foreach my $protocol (@protocols) {
- my $ciphersstatus = undef;
- my @ciphers = run(app(["openssl", "ciphers", "-s", $protocol,
- "ALL:$ciphers"]),
- capture => 1, statusvar => \$ciphersstatus);
- @ciphers = grep {!/CAMELLIA|ARIA|CHACHA/} @ciphers;
- $ciphersstatus{$protocol} = $ciphersstatus;
- if ($ciphersstatus) {
- $ciphersuites{$protocol} = [ map { s|\R||; split(/:/, $_) }
- @ciphers ];
- $protocolciphersuitecount += scalar @{$ciphersuites{$protocol}};
- }
- }
- plan skip_all => "None of the ciphersuites to test are available in this OpenSSL build"
- if $protocolciphersuitecount + scalar(keys %ciphersuites) == 0;
- # The count of protocols is because in addition to the ciphersuites
- # we got above, we're running a weak DH test for each protocol (except
- # TLSv1.3)
- my $testcount = scalar(@protocols) + $protocolciphersuitecount
- + scalar(keys %ciphersuites);
- $testcount-- unless $no_tls1_3;
- plan tests => $testcount;
- foreach my $protocol (@protocols) {
- ok($ciphersstatus{$protocol}, "Getting ciphers for $protocol");
- }
- foreach my $protocol (sort keys %ciphersuites) {
- note "Testing ciphersuites for $protocol";
- # ssltest_old doesn't know -tls1_3, but that's fine, since that's
- # the default choice if TLSv1.3 enabled
- my $flag = $protocol eq "-tls1_3" ? "" : $protocol;
- my $ciphersuites = "";
- foreach my $cipher (@{$ciphersuites{$protocol}}) {
- if ($protocol eq "-ssl3" && $cipher =~ /ECDH/ ) {
- note "*****SKIPPING $protocol $cipher";
- ok(1);
- } else {
- if ($protocol eq "-tls1_3") {
- $ciphersuites = $cipher;
- $cipher = "";
- }
- ok(run(test([@ssltest, @exkeys, "-cipher", $cipher,
- "-ciphersuites", $ciphersuites, $flag || ()])),
- "Testing $cipher");
- }
- }
- next if $protocol eq "-tls1_3";
- is(run(test([@ssltest,
- "-s_cipher", "EDH",
- "-c_cipher", 'EDH:@SECLEVEL=1',
- "-dhe512",
- $protocol])), 0,
- "testing connection with weak DH, expecting failure");
- }
- };
- subtest 'RSA/(EC)DHE/PSK tests' => sub {
- ######################################################################
- plan tests => 5;
- SKIP: {
- skip "TLSv1.0 is not supported by this OpenSSL build", 5
- if $no_tls1 || $provider eq "fips";
- SKIP: {
- skip "skipping anonymous DH tests", 1
- if ($no_dh);
- ok(run(test([@ssltest, "-v", "-bio_pair", "-tls1", "-cipher", "ADH", "-dhe1024dsa", "-num", "10", "-f", "-time"])),
- 'test tlsv1 with 1024bit anonymous DH, multiple handshakes');
- }
- SKIP: {
- skip "skipping RSA tests", 2
- if $no_rsa;
- ok(run(test(["ssltest_old", "-provider", "default", "-v", "-bio_pair", "-tls1", "-s_cert", srctop_file("apps","server2.pem"), "-no_dhe", "-no_ecdhe", "-num", "10", "-f", "-time"])),
- 'test tlsv1 with 1024bit RSA, no (EC)DHE, multiple handshakes');
- skip "skipping RSA+DHE tests", 1
- if $no_dh;
- ok(run(test(["ssltest_old", "-provider", "default", "-v", "-bio_pair", "-tls1", "-s_cert", srctop_file("apps","server2.pem"), "-dhe1024dsa", "-num", "10", "-f", "-time"])),
- 'test tlsv1 with 1024bit RSA, 1024bit DHE, multiple handshakes');
- }
- SKIP: {
- skip "skipping PSK tests", 2
- if ($no_psk);
- ok(run(test([@ssltest, "-tls1", "-cipher", "PSK", "-psk", "abc123"])),
- 'test tls1 with PSK');
- ok(run(test([@ssltest, "-bio_pair", "-tls1", "-cipher", "PSK", "-psk", "abc123"])),
- 'test tls1 with PSK via BIO pair');
- }
- }
- };
- subtest 'Custom Extension tests' => sub {
- ######################################################################
- plan tests => 1;
- SKIP: {
- skip "TLSv1.0 is not supported by this OpenSSL build", 1
- if $no_tls1 || $provider eq "fips";
- ok(run(test([@ssltest, "-bio_pair", "-tls1", "-custom_ext"])),
- 'test tls1 with custom extensions');
- }
- };
- subtest 'Serverinfo tests' => sub {
- ######################################################################
- plan tests => 5;
- SKIP: {
- skip "TLSv1.0 is not supported by this OpenSSL build", 5
- if $no_tls1 || $provider eq "fips";
- note('echo test tls1 with serverinfo');
- ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo])));
- ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo, "-serverinfo_sct"])));
- ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo, "-serverinfo_tack"])));
- ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo, "-serverinfo_sct", "-serverinfo_tack"])));
- ok(run(test([@ssltest, "-bio_pair", "-tls1", "-custom_ext", "-serverinfo_file", $serverinfo, "-serverinfo_sct", "-serverinfo_tack"])));
- }
- };
- }
|